Crane Tech 2015 Training Schedule

8/16/2019 Crane Tech 2015 Training Schedule

http://slidepdf.com/reader/full/crane-tech-2015-training-schedule 1/20



00.521.7669 ● www.cranetech.com

In recent years, requirements for training and qualicaons rapidly evolved introducing strict new requirements.

Crane Tech remains at the forefront of these developments, oering customers a wide variety of operator

qualicaon and cercaon opons. We connually invest in the development of new programs and

methods, exploring the latest technologies, and seng industry standards with the most advanced training

and evaluang soluons.

Whether you’re interested in Scheduled training at one of our locaons, or our highly eecve On-Site training,

Crane Tech is your ideal source. We back up our service with a deep knowledge base, unsurpassed customer

service, and more than thirty-eight years in the material handling training and inspecon eld.

ContentsCourse Title Page

On-Site Training ...............................................................................................4

On-Site NCCCO Cered Training ....................................................................5

* Mobile Crane Professional Operator Development ...................................... 6

* Cered Mobile Crane Operator NCCCO ......................................................7

† Mobile Crane Operator (3-day) .....................................................................8

* † Mobile Crane Operator (4-day) Hands-On .................................................8

* † Mobile Crane Inspector .............................................................................9

† Qualied Signal Person ................................................................................10

† Qualied Rigger Level 1 ...............................................................................11

† Qualied Rigger Level 2 (2-day) ...................................................................12

* † Qualied Rigger Level 2 (3-day) Hands-On ...............................................12

Rigging Inspector ............................................................................................13

* † Overhead Crane Operator.........................................................................14

* † Overhead Crane Inspector ........................................................................15

† Forkli Train-the-Trainer ..............................................................................16

* † Aerial Li Operator ...................................................................................17

* † Pedestal Crane Inspector ..........................................................................18

Train-the-Trainer .............................................................................................19

Easy Registraon for Courses

• Call 800.521.7669 and ask for registraon, or

• Register on-line at www.cranetech.com

Why Choose Crane Tech

All courses noted with an asterisk (*) require PPE. See boom of page 3.

All courses noted with a dagger (†) are available as Train-the-Trainer.

Safety through Education 800.521.7669 • www.cranetech.com



800.521.7669 ● www.cranetech.

Hands-On Training at Our State-of-the-Art Facilies

Crane Tech’s Tampa Training Facilies provide expert instrucon in state-of-the-art classroom and hands-o

training centers. With more than 20,000 sq. feet under roof, ve overhead bridge cranes, mobile cranes, aeria

li, and large assortment of rigging gear there is lile that can’t be accomplished. Hands-on training is simplthe best way to learn, and our Tampa Training Centers are the best in the business.

Training Manuals and Documentaon

Professionally developed and fully illustrated course manuals support every course and will serve as a valuabl

reference for many years. With the excepon of required PPE, students need only show up and we do the res

Cercates of Training, course transcript, and wallet card are provided for all students successfully complen

training. Crane Tech documents are accepted by OSHA and all Federal agencies as evidence of qualied training

We ensure each program meets industry requirements using the most current standards and regulaons.

Federal Training Requirements

From NCCCO Cercaon to qualied training, Crane Tech oers numerous programs to meet the new OSH

1926 Subpart CC regulaon. Persons working under General Industry, Marime, API, or any of the man

Government Agency requirements will nd Crane Tech oers a complete line of programs to sasfy your needs

Site Safety Assessment and On-Site Consultants

An accident can have serious long-lasng eects on the health and stability of a company. Hazards overlooked o

a daily basis by insiders can be revealed by the objecve eye of an experienced third party. We can assess youpersonnel’s knowledge and skills, material handling pracces, records, policies, and exisng documentaon fo

gaps that can cost thousands in nes and lost work if not corrected.

Accident Invesgaon and Ligaon Support

Crane Tech’s ability to cut through non-essenal issues, nd facts, and provide documented support i

unsurpassed. Our sta has invesgated hundreds of accidents and we are oen retained by OSHA to trai

their personnel and to provide support on accident invesgaons.

Enroll Two Students and the Third is Free

For select programs a third parcipant is free when you enroll two parcipants. A 33% savings! See Discount

on page 19. Certain restricons apply for Train-the-Trainer Programs.

PPE Requirements for Hands-on Courses

Watch for the safety icon in this schedule which indicates a PPE requirement. For all noted programs be sur

to bring: hard hat, eye protecon, steel toe shoes/boots, hearing protecon, and work gloves. Crane Tech w

provide high-visibility safety vests and, when required, safety harness and lanyard.

Setting the Standard

3 r d F ree




On-Site Training

Specialized On-Site Training: All courses oered in this schedule are regularly conducted on-site at customerswork locaons throughout the United States and worldwide. Crane Tech provides you, your company, and your

employees an exceponal training program with these key benets.

• Customized Training: Crane Tech Training Programs are customized to meet your specic equipment,

exact needs, regulatory codes, and personnel’s background.

• Flexible Schedule: Your schedule is our schedule. First, second, or third shi, weekends or even holidays—

we provide training as your schedule requires.

• Cost Eecve: On-Site courses are a great value when even a few employees require training. Avoid

costly hotel and per diem costs, airline ckets and addional employee absence from their work locaon.

• Expert "Field Experienced" Instructors: Crane Tech instructors have extensive material handling

backgrounds. Instructors are ready to deliver a results oriented program to solve your company's training

needs.

Every Course Listed In This ScheduleIs Available For On-Site Presentaon!

• NCCCO Cered Operator

• Mobile Crane Operator

• Mobile Crane Inspector

• Qualied Signal Person

• Qualied Rigger (Level 1 & 2)

• Master Rigger

• Overhead Crane & Hoist Operator

• Overhead Crane & Hoist Inspector

• Pedestal Crane Operator

• Pedestal Crane Inspector

• Rigging Gear & Sling Inspector

• Aerial Li Operator

• Forkli Operator

• Digger Derrick Operator

• Boom Truck Operator

• Bucket Truck Operator

• Tower Crane Operator

• Harbor Crane Operator

• Straddle Crane Operator

• Reach Stacker Operator

• Backhoe & Loader Operator

• Container Crane Operator

For more informaon or to speak with a training specialist call 800.521.7669.

We Deliver On-Site Training Worldwide!

Paral Lisng of Courses Available for On-Site Presentaon




On-Site NCCCO Training

Crane Tech’s commitment to the Naonal Commission for the Cercaon of Crane Operators (NCCCO) bega

in the mid 1990’s and remains strong today. We volunteer hundreds of man hours annually to various NCCCO

commiees, as well as hosng numerous NCCCO commiee and task force meengs over these many year

We are a proud NCCCO Planum sponsor, and our company is represented by membership on several NCCC

commiees and the NCCCO Commission.

Our commitment to the NCCCO ensures each cercaon course provided is properly oriented for NCCCO

tesng. We will ensure your personnel are up to the NCCCO test challenge by providing a fundamental safet

course that covers all subjects domains. Each course is presented by instructors who are NCCCO Cere

operators and NCCCO Accredited praccal examiners.

Persons who successfully complete Crane Tech programs are beer equipped to make posive decision

regarding safety and control of their equipment. We believe that it ’s not how well one does on a test, but how

well one can maintain an accident free job site long term.

Crane Tech is prepared to help you gain cercaon and has a detailed process that takes you step-by-stefrom iniang your NCCCO applicaon to achieving cercaon.

• Signal Person ..................................... parcipated on the task force

• Rigger Level I .............................................. serve on the commiee

• Rigger Level II ............................................. serve on the commiee

• Mobile Crane Operator .............................. serve on the commiee

• Arculang Crane Operator. ....................... serve on the commiee

• Digger Derrick Operator ............................. serve on the commiee

• Overhead Crane Operator .......................... serve on the commiee

• Crane Inspector ................................. parcipated on the task force

• Li Director ........................................ parcipated on the task force

• Dedicated Pile Driver ......................... parcipated on the task force

Crane Tech’s Service on NCCCO Commiees

Crane Tech has a full-me sta dedicated to help our customersgain NCCCO cercaon. We complete all applicaons and

paperwork, walking you through the enre process.

Crane Tech is a

proud NCCCO

Planum Sponsor

Questions? We'd Be Happy To Help! 800.521.7669

Crane Tech fully endorses the national certication program

offered by the National Commission for the Certication of

Crane Operators (NCCCO), and will prepare candidates for

the CCO certication examinations.




Mobile Crane Professional Operator Development

If you need crane operators and need them fast, Crane Tech’s Mobile Crane Professional Operator Development

program puts operators on track. Our 15-day Professional Development training provides the knowledge and

skills to become an NCCCO cered crane operator with extended training that details each of the subjects

necessary for this professional trade. As a bonus, you will receive training and tesng required by OSHA to

become a Qualied Rigger.

For one low price you have the opportunity to gain the qualicaons and cercaons needed to work where

OSHA and employers demand NCCCO cercaon. And, because of the extended topics of li planning, crane

inspecon, personnel handling, and assembly/disassembly, you will return to work capable of lling the vital

role of crane operator.

Training conducted at Crane Tech’s Tampa Training Center includes hands-on operaon of mobile cranes and

extended training necessary to provide a thorough understanding that’s necessary for safe and ecient crane

operaon.

15 day ....... Course 4002 ....... $3,495

Tampa, FL....................January 12–30

Tampa, FL........................March 2–20

Tampa, FL.................April 27–May 15

Tampa, FL............................ July 6–24

Tampa, FL.....................October 5–23

Tampa, FL...................Nov 30–Dec 18

Course Locaons and Dates

Mobile crane operaon safety

Crane set-up and ground stability

Load chart exercises and workshops

Operator aids and LMI's

Crane component inspecon

Wire rope: types and inspecon Crane operaon: set-up and driving skills

Hands-on load control training

Li planning

Crane assembly and disassembly

Standards and regulaons

Emergency procedures

Mobile Crane Operator manual

Qualied Rigger Level 1 manual

OSHA 1926 Subpart CC manual

ASME B30.5 standard

Plus references and coursematerials too numerous to list

Course Topics Include

What You Will Receive

PPE listed on page 3 is

required for this program.Week 1: 4-day mobile operator training with

1-day hands-on training—plus Qualied

Rigger Level 1 training and tesng to meet

OSHA §1926 Subpart CC requirements.

Week 2: Combined mobile crane hands-on

training and technical training for load

charts, range diagrams, crane set-up, li

planning, hydraulic systems, wire rope

inspecon, regulaons, pre-operaonalinspecon and operaon techniques.

Week 3: NCCCO Cercaon Test prep training

that includes all fees for: core exam, two

specialty exams, and one praccal exam.

What This Course Includes

Call to Learn More About This Extensive Program 800.521.7669




Certifed Mobile Crane Operator NCCCO

Crane Tech has provided NCCCO cercaon for 16 years. Our preparatory programs place primary emphasi

on the four knowledge domains specied under NCCCO guidelines. Candidates learn what's required fo

safe crane operaon then pracce for tesng with tests of the same content and structure as provided fo

cercaon.

For those who may need extra me learning the subjects or me praccing on a mobile crane we strongly

recommend aending our Mobile Crane Operator or Professional Operator Development course. Eac

instructor for these programs is an NCCCO cered operator and expert instructor.

Crane Tech Is A Proud NCCCO Platinum Sponsor


3 day .....Course 3608 .....$1,895*

Tampa, FL................January 26–30

Tampa, FL..................March 16–20

Tampa, FL..................... May 11–15

Tampa, FL...................... July 20–24

Tampa, FL............... October 19–23

Tampa, FL........... December 14–18

The 3-day technical prep course is scheduled forMon-Tues-Wed followed by NCCCO wrien and

praccal examinaons on Thursday and Friday.

*Price includes core exam, two specialty wrien

exams and one TSS or TLL praccal exam.

Addional specialty exams and praccal exams

may be added.

PPE listed on page 3 is

required for this program.

Crane Tech has full-me sta dedicated to help

our customers complete applicaons and necessary

paperwork for cercaon. We do all the ling and

walk you step-by-step through the process.

With several NCCCO licensed praccal examiners on sta,

this program can be delivered at the site of your choice.

Read more about Crane Tech's NCCCO commitment on page

5 of this schedule.

Ask about our NCCCO Study Reference Kit for this program.

Crane Tech fully endorses the national certication program offered by the National Commission for the

Certication of Crane Operators (NCCCO), and will prepare candidates for the CCO certication examinations.




Train-the-Trainer Is Available For This Program

Crane operaonal characteriscs

Frequent and periodic inspecons

How to read and apply load charts

How to use a range diagram

Quadrants of operaon Reeving and line pull

Proper mobile crane set-up

Evaluang ground and soil stability

Outriggers and pad loading

Use of jibs and extensions

Mobile Crane Operator

Mobile Crane Operator Training is designed for operators, safety personnel, and supervisors of all types of

Mobile Cranes. Training thoroughly covers cranes regulated by OSHA and ASME B30.5. You will learn crical

elements that include; operaonal characteriscs, load charts, proper set-up, use of jibs and extensions, load

indicang devices, crane stability, structural competence, pre-use and periodic inspecons, hazard awareness,

power line hazards, operator responsibilies, job planning, with extensive workshop interacon.

Three-day courses are oered at all locaons. Those wishing to receive hands-on operator training should

aend the four-day course at our Tampa Training Center.


Stability vs structural competence

Evaluang the load

Wire rope types and inspecon

Accident prevenon and root cause

How to determine load weight

Eects of side loading

Power line contact prevenon

Crane hands signals

Personnel liing

OSHA/ASME compliance


3 day ........ Operator Training ......................Course 1002 ................ $895

4 day ......... Operator Hands-On ...................Course 4003 ............. $1,095

3 day ......... Train-the-Trainer .......................Course 3612 ............. $1,3954 day ......... Train-the-Trainer Hands-On .......Course 3587 ............. $1,895

Tampa, FL................. January 12–15

Tampa, FL....................... March 2–5

Tampa, FL...................... April 27–30

Tampa, FL........................... July 6–9

Tampa, FL.................... October 5–8

Tampa, FL.................. Nov 30–Dec 3

Houston, TX ............... February 2–4

Houston, TX ......... March 30–April 1

Houston, TX ...................... June 3–5

Baton Rouge, LA.........August 17–19

Houston, TX ........September 16–18

St. Louis, MO ........ November 9–11

Charleston, SC .........December 7–9

PPE listed on page 3 is required for

Tampa Training Center programs.

Suitable for Operators,

Supervisors, and Safety Personnel

3 r d F ree

3 and 4 Day Course Locaons 3 Day Course Locaons




Accidents don't happen by chance, they are a consequence of unsafe pracces

Mobile Crane Inspector

Machine size and characteriscs

Operaonal modes

Major and minor components

Capacity and limitaons

Periodic inspecons objecves

Hazard awareness

Accident prevenon

Crane failures and prevenon

Mobile Crane Inspector training is an in-depth program designed for anyone responsible for mobile cran

inspecon, equipment reliability, loss control, and equipment management. Learn crane inspecons an

compliance from a company with more than four decades of OSHA accredited compliance inspeco

experience. When aending at our Tampa Training Center you will spend me hands-on inspecng cranes.

Parcipant Materials IncludeOSHA §1926 Subpart CC Manual, Mobile Crane Inspector Manual, and Crane Tech's Li

Equipment Basics Manual.


3 day .........Inspector Training ...........Course 1004...........$895

4 day ..........Inspector Hands-On .........Course 3610 ........$1,395

Tampa, FL..................... February 2–5

Tampa, FL..........................July 27–30

Tampa, FL...................November 2–5

Houston, TX ........................ April 6–8

Houston, TX ...................... June 8–10

Baton Rouge, LA ..........August 24–26

Houston, TX ...............October 28–30

OSHA: compliance and inspecons

Recognion of unsafe equipment

Wire rope selecon and installaon

Wire rope inspecon and rejecon

Component inspecon

Sheave inspecon

Pneumacs and hydraulic systems

Inspector safety

3 r d F ree





Inspector and Hands On Training Inspector Training




0 Train-the-Trainer Is Available For This Program

Qualifed Signal Person

Qualied Signal Person training ensures you meet current OSHA §1926 Subpart CC requirements as a qualied

person. This is a dynamic program that has rapidly become one of our most popular courses. Federal OSHA

§1926.1428 requires that persons who signal cranes receive training and tesng to be a qualied signal

person.

Many training dates are scheduled back-to-back with Qualied Rigger Level 1

programs. Make the most of your training and aend both courses!

New Orleans, LA ............. January 8Houston, TX .................. January 27

Dallas, TX ...................... February 5

Tampa, FL ................... February 17

Chaanooga, TN .............. March 9

Houston, TX .................... March 24

Morgan City, LA .................April 20

Tampa, FL .......................... May 19

Houston, TX ....................... June 16

Tampa, FL ........................ August 4

Terminology of the new standard

Crane characteriscs and limitaons

Signal person responsibilies

When is a signal person required Hand, voice, and audible signals

Working around power lines

Step and touch potenal

Clearance requirements for cranes

Baton Rouge, LA ............ August 21Houston, TX ...............September 1

Morgan City, LA .......September 15

Tampa, FL ................September 22

Houston, TX ................. October 19

Baton Rouge, LA ........ November 3

St. Louis, MO ........... November 12

Tampa, FL ................ November 23

Charleston, SC ............December 1

Reacon to power line contact

Keeping clear of the load (Fall zone)

Requirements of §1926 Subpart CC

Dangers of side loading Crane dynamics

Dangers of two-blocking

Causes of mobile crane pping

Causes of structural failures

This course provides signal persons the knowledge of crane

dynamics and operaon that’s required by §1926 Subpart CC.


1 day ............ Signal Person .................Course 3902 .............. $595

1 day ............. Train-the-Trainer ...........Course 3910 ........... $1,395

3 r d F ree





Qualied Rigger Level 1 training provides the training necessary for an employer to designate a person to wor

as a competent basic level rigger. Training sases qualicaon requirements for the construcon industry

OSHA §1926 Subpart CC, General Industry OSHA §1910, and other required qualicaons for training.

Persons aending this program will learn pre-use inspecon, proper use, and applicaon of rigging gear. Coursfocus includes making sure all parcipants fully understand sling hitches, proper rigging gear assemblies, slin

protecon, and work site safety.

Qualifed Rigger Level 1

New Orleans, LA..............January 9

Tampa, FL ......................January 16

Houston, TX ...................January 26Dallas, TX .......................February 6

Tampa, FL ....................February 16

Tampa, FL ..........................March 6

Chaanooga, TN .............March 10

Houston, TX.....................March 23

Houston, TX ......................... April 2

Morgan City, LA ................. April 21

Tampa, FL ............................. May 1

Tampa, FL ........................... May 18

Houston, TX ........................June 15

OSHA regulaons, §1926 and §1910

Wire rope slings and proper use

Synthec web slings and proper use

Round slings and proper use

Chain slings and proper use

Rigging hardware and proper use

Below-the-hook liing devices

Pre-use sling and gear inspecon

Soeners and sling protecon

Sling hitches and applicaons

Tampa, FL ............................... July 10

Tampa, FL ............................ August 3

Baton Rouge, LA ................ August 20Houston, TX .......................August 31

Morgan City, LA .......... September 14

Tampa, FL ................... September 21

Tampa, FL .......................... October 9

Houston, TX .....................October 20

Baton Rouge, LA ............ November 2

St. Louis, MO ............... November 13

Tampa, FL .................... November 24

Charleston, SC ............. November 30

Tampa, FL ...................... December 4


1 day .............Rigger Training .............. Course 3904 .............. $595

1 day ..............Train-the-Trainer ........... Course 3911 ........... $1,395

How to verify working load limit

Keeping clear of the load (Fall zone)

Sling angles and angle stress

Load balance and center of gravity

Requirements of §1926 Subpart CC

Manufacturer’s instrucons

Understanding the fall zone

Taglines and their proper use

Power line safety

Safety while working around cranes


Many training dates are scheduled back-to-back with Qualied Signal Person

programs. Make the most of your training and aend both courses!

3 r d F ree





Qualifed Rigger Level 2

When aending our Tampa Training Center learn hands-on

with rigging acvies that reinforces your skills.

All Rigger Level 1 topics

Wire rope slings

Synthec slings

Chain slings Liing beams and spreader bars

Come-a-longs and lever hoists

Shackles

Hooks

*Houston, TX ........ September 2–3

Tampa, FL........... September 23–25

*Houston, TX ......... October 26–27

*Baton Rouge, LA .. November 4–5

*St. Louis, MO ... November 16–17

*Charleston, SC ..... December 2–3

Tampa, FL............... December 2–4

Aend as a Train-the-Trainer program and receive all the

materials necessary to provide this training at your facility.

Qualied Rigger Level 2 training provides the knowledge and skills necessary for a person to work as a

journeyman level rigger. This course prepares persons to perform rigging calculaons and to select and apply

rigging for safe controlled load handling. Persons compleng this training will understand their responsibility

to ensure proper rigging methods are used and that all variables which could result in a rigging failure are

accounted for through planning and proper selecon of gear. Training sases the qualicaon requirementsfor OSHA §1926, §1910, and other required qualicaons.

Pre-use inspecon

Sling rangs

Sling angle stress

Sling applicaon Sling selecon

Rigging gear selecon

Rigger/personnel safety

And, much more...


*Houston, TX ..........January 28–29

Tampa, FL...............February 18–20

*Chaanooga, TN .........March 4–5

*Houston, TX ............March 25–26

Tampa, FL...................... May 20–22

*Houston, TX ...............June 17–18

Tampa, FL......................August 5–7


2 day ........ Rigger Training ........................Course 4004 .......... $795

3 day ....... Rigger Hands-on ......................Course 3940 .......... $995

2 day ........ Train-the-Trainer .....................Course 3615 ....... $1,595

3 day ........ Train-the-Trainer Hands-on......Course 4007 ....... $1,895

3 r d F ree

2

* Denotes 2-day only oeringPPE listed on page 3 is required for



2 and 3 Day Course Locaons




If you have been wanng to improve your rigging inspecon skills, then this program is the most comprehensiv

in the industry. We start with a wide assortment of slings and rigging gear with varying degrees of damage

and deciencies that allows parcipants to learn inspecon hands-on. Rigging Inspector training provide

technical and hands-on training in an environment unique in the material handling eld. You will learn the

principles and standards specic to rigging gear and sling inspecons. This program has a compliance basiunder OSHA, ASME and API industry standards and specic to state and government agency requirement

where applicable.

R igging Inspector


Wire rope sling inspecon

Chain sling inspecon

Synthec sling inspecon Hook and shackle inspecon

Rings and link inspecon

Eye bolts and hoist ring inspecon

Plate clamp and beam clamp inspecon

Hand chain and lever hoist inspecon

Below-the-hook liing devices

Sling tags and capacity markings

Proper inspecon techniques

Compliance OSHA/ASME and API

Common causes of rigging damage

Record keeping requirements

Use of inspecon tools


3 day ..........Course 3525 ........... .... $1,195

Houston, TX ........................ February 18–20

Tampa, FL................................ March 16–18

Morgan City, LA ......................... April 15–17

Houston, TX ............................... June 22–24

Tampa, FL.....................................July 20–22

Morgan City, LA ...............September 16–18

Houston, TX ..........................October 21–23

Morgan City, LA ................November 18–20

Tampa, FL.......................... December 14–16

This training includes many sling and

rigging components with varying

degrees of deciencies. Inspectors

learn hands-on how to inspect and

document all the deciencies found

on each component. Technical

training combined with extensive

hands-on exercises insures you have

the knowledge and skill required to

perform a comprehensive inspecon.

An excellent program for

inspectors and those whomaintain rigging equipment for any company.

This program is mandatory for oshore inspecons of

slings and rigging gear.

3 r d F ree







Overhead Crane Inspector

This program provides you with the knowledge and skills to ensure safety and reliability for the cranes at you

facility. Instructors for these programs have a lifeme of experience in both inspecon and maintenance of overhea

cranes. When aending at our Tampa Training Center you will parcipate in hands-on inspector training.

Learn what’s necessary to ensure safety and compliance with subjects such as; how to inspect wire rope and chainmechanical systems, sheaves, safety devices, holding and load control brakes, and more.

Tampa, FL.....................January 7–9

Tampa, FL......................April 15–17Tampa, FL.................. August 12–14

Tampa, FL..................Sept 30–Oct 2

Machine characteriscs

How to check operaonal modes

Major operaonal components

Brake types and their characteriscs

Capacity consideraons and limitaons

Safety devices and inspecons

Contribung causes of crane failures

Required basic maintenance

Recognion of unsafe condions

Load bearing and load controlling parts

Electrical disconnect inspecon

Inspecon frequency

Holding and controlling brakes Wire rope inspecon

Hoist chain inspecon

Safety device Inspecon

Lockout/tag-out requirements

Hoist power systems inspecon

Hook and block inspecon

Hoist suspension inspecon

Pendant and controller inspecon Trolleys and trolley drive units

Bridge drive inspecon

Track and rail inspecon

Switches and interlock inspecon

Resistors & controller inspecon

Load control brake inspecon

Electric load control brakes

Overload protecon devices

Inspect collectors and conductors

Inspect stops, bumpers and sweeps

Drum and sheave inspecon

Reeving and controlling block twist

Record keeping requirements

When aending our Tampa Training Center you will

perform hands-on inspecons to sharpen your skills!


2 day .......... Inspector .......................Course 4005 ...............$795

3 day ........... Inspector Hands-on........Course 1005 ............$1,195

Houston, TX ..............February 11–12

Houston, TX .....................June 29–30Baton Rouge, LA ....November 11–13

3 r d F ree




Refresher Training Available For All Programs

3 Day Course Locaons2 Day Course Locaons




Powered Industrial Trucks (Forkli Trucks) represent one of the greatest potenal job-site hazards in industry.

Parcipants learn operaonal safety, how to avoid accidents, and gain crical informaon necessary to comply

with OSHA regulaons.

Forklift Train-the-Trainer


1 day .......Course 3617 ...... $1,395

Tampa, FL..........................January 5

Houston, TX .................February 16

Chaanooga, TN ..............March 12

Tampa, FL..............................April 8

Tampa, FL............................ May 18

Houston, TX ........................June 11

Tampa, FL..........................August 3Baton Rouge, LA .............August 27

Tampa, FL................. September 23

Baton Rouge, LA ....... November 16

St. Louis, MO ............ November 19

Tampa, FL.................. November 30

Charleston, SC .......... December 11

Principles of a li truck

Operang safety

Liing, lowering and lng

Forkli capacity Forward and side stability

Direcon change and stopping

Traveling on ramps

Traveling on uneven ground

Crossing rail road tracks

Extending and raising boom

Working around power lines

Working with signals

Pre-use inspecon

Normal shutdown procedures Emergency shutdown procedures

Fire exnguisher requirements

Controls and instruments

Safety rules

Refueling safety

Baery safety and charging


3 r d F ree

6

What You Will LearnThis program covers both vercal

mast and telescopic boom forklis.

Topics include: idencaon of

truck types for classicaon and

intended use, pre-use inspecon,

operaonal characteriscs, truck

stability, accident avoidance, proper

load stacking and load centers,

use of nameplate data, safedriving skills, and operator safety

requirements.

* Parcipants wanng Train-the-Trainer status with their free enrollment only pay Train-the-Trainer fees.


Specic Training Objecves

Parcipants learn how to qualify

forkli operators in accordance with

OSHA 29CFR Part 1910.178 (Powered

Industrial Trucks). Course meets

OSHA and ASME requirements.

Provided With All

Train-the-Trainer Programs

Detailed Training Syllabus

PowerPoint Presentaons

Workshops

Wrien Tests

Performance Tests

See more details–page 19

*




Aerial Li Operator training provides instrucon to ensure equipment operators are fully aware of the hazard

associated with this type equipment and understand their responsibility for connual safety. Both one an

two day programs include operaon safety and pre-use inspecon with Tampa Training Center program

providing hands-on training for operaon skills.

Aerial Lift Operator

This program ensures

operators meet OSHA training

and competency requirements.

Aend at our Tampa Training Center and receive technical and hands-on training

Failures and accident avoidance

Observing for unsafe condions

Prevenon of unsafe acts

Pre-use inspecon

Safety procedures for operators

Operang and maneuvering skills

Ground crew safety

Tampa, FL.....................January 6–7

Tampa, FL........................April 9–10

Tampa, FL...................... May 19–20Tampa, FL......................August 4–5

Tampa, FL........... September 24–25

Tampa, FL................ December 1–2

Houston, TX .................February 17

Chaanooga, TN ..............March 11

Houston, TX ........................June 12Baton Rouge, LA .............August 28

Baton Rouge, LA ....... November 17

St. Louis, MO ............ November 18

Charleston, SC .......... December 10

Use of ground controls

Capacity limitaons

Baery safety and charging

Refueling safety

Hands-on performance training

Periodic inspecon requirements

Hands-on operaon and inspecon



2 day ...... Operator Hands-on .........................Course 3405 ......... $795

1 day ..... Train-the-Trainer .............................Course 3616 ...... $1,395

2 day ...... Train-the-Trainer Hands-on .............Course 4006 ...... $1,895

3 r d F ree

What You Will Learn

Operators learn pre-use inspecon

requirements and methods, safe use

and operaon skills, ground controls

and regulaons that govern aerial li

operaon.




Provided With All

Train-the-Trainer Programs



Workshops

Wrien Tests

Performance Tests

See more details–page 19

1 and 2 Day Course Locaons1 Day Course Locaons




Pedestal Crane Inspector


Types of pedestal cranes

General operang pracces

Pedestal crane load rangs

Crane components inspecon

Wire rope: types and characteriscs

Pedestal cranes working in the oshore industry are subject to forces and condions that require the most

comprehensive inspecon process available. Crane Tech has worked with some of the largest oil exploraon

and producon companies in the world, helping improve their pedestal crane inspecons.

This Pedestal Crane Inspector program provides the knowledge and skills to perform a comprehensiveinspecon and is specically designed for persons who inspect, test, and report on the condion of these

oshore cranes. Course compliance basis includes API standards and regulaons.

Course Locaons & Dates3 day ... ........Course 3611..........$1,195

Lafayee, LA .......................... April 22–24

Lafayee, LA ................ September 28–30

3 r d F ree

8

PPE listed on page 3 is required for this training.

Wire rope: inspecon methods and

rejecon criteria

Inspecon requirements and documentaon

Pedestal crane tesng

Pedestal crane inspector safety

If you have previously aended

any Crane Tech courses ask

about our Refresher courses

available for all programs.





Payment Terms, Cancellaon, and Course Changes• Enrollment is by Credit Card or Company Check unless pre-

approved. If paying by purchase order or government form pleasecontact the course registrar. You may make credit card paymentsvia phone. Enrollment is not guaranteed unless payment is receivedprior to start of training.

Cancellaon Policy• If you cannot aend a program you may send a substute or receive a course credit (less a $50 processing fee) toward a

future program oered within one year. If you cancel within ten (10) business days before a program or fail to show up for theprogram you are liable for the enre course fee.

• If it is necessary to cancel a program or change program dates Crane Tech will aempt to contact you at least ve (5) businessdays before the program start date. Please purchase airline ckets accordingly. Crane Tech will not be responsible for non-refundable travel fees. Due to unforeseen circumstances beyond our control Crane Tech reserves the right to change programdates without noce.

• Please check with the course registrar prior to making any airline or non-refundable reservaons as courses may change due tounforeseen circumstances.

Discounts• For select programs, when you enroll two students in the same class for the same dates from the same company a third

student's tuion is free. Parcipants wanng Train-the-Trainer status with their free enrollment only pay Train-the-Trainer fees

For those seeking Train-the-Trainer status, Crane Tech oers the most value and comprehensive training—an

the most complete training package. Receive expert instrucon and high quality materials to conduct trainin

at your facility—all at a fracon of the cost of in-house development.

Terms, Cancellaons, Course Changes and Discounts

Train-the-Trainer

Mobile Crane Operator

Overhead Crane Operator

Aerial Li Operator

Forkli Operator

Qualied Signal Person

Qualied Rigger Level 1

Qualied Rigger Level 2

Mobile Crane Inspector

Overhead Crane Inspector

You will receive everything you need to conduct training at your facility.

Student manuals and materials can be ordered from Crane Tech.

Master Training Manual


Digital Copies of


Ten Student Wallet Cards

Ten Hard Hat Sckers

Interacve Workshops Wrien Examinaons

Performance Tests

Specialty Handouts

Record Keeping Documents

A Crane Tech Aaché*

Lifeme Support

For all services we accept:

Easy Registraon for Courses

• Call 800.521.7669 and ask for registraon, or

• Register on-line at www.cranetech.com

Popular Train-the-Trainer Courses Most Trainer Kits Include



Safety through Education

Crane Tech, LLC and its employees are commied to achieving excellence and maintaining our

posion of leadership in the material handling training and consulng eld. We honor our customers

with superior service and dedicate ourselves to providing an unmatched level of experse.

We help companies build the skill and condence necessary not just to perform when it is easy,but to perform at a high level under the most challenging and complex condions.

Thanks to the thousands of companies, organizations and individuals

who put their trust in our hands and who have allowed

Crane Tech to reach our thirty-eight year mark.

The Most Trusted Name in Material Handling

Safety Training and Inspection Services

" All of our training goals were met or exceeded. Yourinstructordidanoutstandingjobandthetrainingexceededmyexpectaons.Ihadhopedforeveryonetoleavethecoursewiththeabilitytobeer

idenfyhazardsandminimizetherisks,improveourabilitytoconductriggingandhoisngoperaons,andleave

hungryformore.AllofthatwasaccomplishedandwecanthankCraneTechforthat."-CorporateSafetyManager,SouthAmericanOperaons

" I'm now supporng my family doing something I've always wanted to do.IjustwanttosaythankyousomuchforallyoudidformeduringtheProfessionalOperatorDevelopmentclass.You

wentaboveandbeyondtoensurethatIhadtheknowledgetosucceed.ThankstoCraneTechIamnowinTexas

operangaGroveRT765E-2."-Graduate,CraneTech'sMobileCraneProfessionalOperatorDevelopment

" "

Everything needed to prepare me for CCO tesng. Thankyouforagreatprogram.The

materialcoveredandthewaythatitwasconveyedwaswhatIneeded.Also,thehands-ontrainingisagreattoolin

preparaonforcercaon.EveryoneatCraneTechwasprofessionalandalwayswillingtohelp.Ilookforwardto

workingwithyouinthefuture."-Graduate,CraneTech'sNCCCOMobileCraneOperatorCercaon

Two thumbs up. Duetoyourexpertteachingskills,IpassedallofmyNCCCOwrientestswithno

problem.Myteamalsopassed.Thanksforeverything,Ihopetotrainwithyouagain." -TechnicalSergeant,UnitedStatesAirForce