TM www.cyberoam-iview.org

Version 1.0- 30/06/2012 Quick Start Guide CR-iVU25 | CR-iVU100 | CR-iVU200

Appliances Elitecore Product

DEFAULTS Default IP addresses

Ethernet Port IP Address eth0 172.16.1.1/255.255.0.0

Default Username & Password*

Web Admin Console * Username admin Password cyberoam

By default Cyberoam iView is shipped with two Administrator Users.

CLI Console (SSH/Serial Connection) Administrator 1 Username admin Password admin

Administrator 2 Username root Password admin

* Username and Password are case sensitive

2 UNDERSTANDING THE APPLIANCE

FRONT PANEL

DVD Drive

HDD 1-2 HDD 3-4

BACK PANEL

Package Contents

Checking the package contents. Check that the package contents are complete. One Cyberoam iViewAppliance One Serial Cable (Null-Modem

Cable) One Straight-through Ethernet

Cable OneACAdapter Cable One Crossover Ethernet Cable Rackmount kit One Cyberoam-iView Quick Start

Guide Documentation CD

Serial Cable Straight-through AC Adapter Cable Ethernet Cable

Crossover Quick Start Guide Documentation Ethernet Cable CD If any items from the package are missing, please contact Cyberoam Support at support@cyberoam-iview.com

USB Port Power

LED Power Button

HDD LED HDD 5-6 HDD 7-8

VGA USB Console System Fans Power Outlet Ports Port Port Power

Fan

3 CONNECTING CYBEROAM IVIEW Ethernet connection 1. Connect one end of the crossover cable into Port eth0 on the Back panel of theAppliance and other

end into the Ethernet Adapter port of Management computer. Change IP address of the management computer to 172.16.1.2 with subnet mask 255.255.0.0

2. Connect one end of the ethernet cable to Port eth1 on the Back panel of the appliance and other end to your

local network (LAN) switch or management network switch from where all the devices are accessible to Cyberoam iView as well theAdministrator would be able to manage Cyberoam iView appliance.

3. Connect the AC Power connector into the Back panel of the Appliance and the other end into a

Standard AC receptacle and turn on the power. 4. Start your management computer. FollowingAppliance LEDs light

up: Power - Green indicating thatAppliance is ON HDD- Green indicating that hard disk isActive

Given below is the table containing various behaviors of appliance LED. Check with the given states before proceeding.

Appliance LED Behavior

LED State Description

Power Green Cyberoam iView appliance in ON

Off Cyberoam iView appliance in OFF

HDD Flashing Red Activity going on

Off No activity

Flashing Amber (Left) Network Activity at the Port

Ports - eth0, Amber (Left) Port is connected at the 100Mbps

eth1, eth2, eth3 Green (Left) Port is connected at the 1000Mbps

Off No link

Blue Operational

RAID5 Red/Blue Synchronizing

Red Hard Disk Failed

5. Once you turn on the power, Cyberoam iView appliance booting process starts. 6. Once the appliance is booted successfully, you will be prompted to login. Logon with default username

'root' and password 'admin'.

7. Change directory to the network- scripts and change IP address of Cyberoam iView appliance using

system-config-network interface. Select action as Edit a device params

Select device as eth0 Change Static IP address of the device and click OK to save the changes. For the demonstration purpose IP address is changed to 172.16.13.120. 8. Execute service network restart command to restart service network. 9. Change Console Password

Congratulations!!! This finishes the basic configuration of Cyberoam iView and you are now ready to use the Appliance.

3 WHAT NEXT 1. Browse to http://172.16.13.120:8000 from the management computer to access Web Admin Console of

Cyberoam iView appliance and logon using default username admin and password cyberoam. 2. Cyberoam iView can be integrated with various devices to generate reports. Refer to

http://sourceforge.net/projects/cyberoam-iview to know integration process with supported devices.

Additional Resources Visit following links for more information on Cyberoam iView Cyberoam Knowledge Base - http://kb.cyberoam.com Technical Help - http://sourceforge.net/projects/cyberoam-iview/forums/forum/953363 Cyberoam Documentation - http://sourceforge.net/projects/cyberoam-iview/files/

Cyberoam iView Documentation Copyright 2012 Elitecore Technologies Pvt. Ltd. Technologies Ltd. All rights reserved worldwide. Elitecore has supplied this Information believing it to be accurate and reliable at the time of printing, but is presented without warranty of any kind, expressed or implied. Elitecore assumes no responsibility for any errors that may appear in this document. Information is subject to change without notice. In no event shall Elitecore be liable for any direct, indirect, or incidental damages, including, damage to data arising out of the use or inability to use this manual. No part of this work may be reproduced or transmitted in any form or by any means except as expressly permitted by Elitecore Technologies Pvt. Ltd. Technologies Ltd. This does not include those documents and software developed under the terms of the open source General Public License. Cyberoam iView is the trademark of Elitecore Technologies Pvt. Ltd. Technologies Ltd. If you need commercial technical support for this product please visit www.cyberoam-iview.com. You can visit open source Cyberoam iView forums at https://sourceforge.net/projects/cyberoam-iview/support to get support from the project community. Cyberoam iView License Policy Cyberoam iView is free software, if you are using and/or enhancing / developing open source applications: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. A copy of the GNU General Public License is available along with this program; see the COPYING file for the detailed license. The interactive user interfaces in modified source and object code versions of this program must display Appropriate Legal Notices, as required under Section 5 of the GNU General Public License version 3. In accordance with Section 7(b) of the GNU General Public License version 3, these Appropriate Legal Notices must retain the display of the "Cyberoam Elitecore Technologies Initiative" logo. Corporate Headquarters Elitecore Technologies Pvt. Ltd. 904, Silicon Tower, Off C.G. Road,Ahmedabad - 380015, Gujarat. India. Phone: +91-79-66065606, Fax: +91-79-26407640, Website: www.elitecore.com

Cyberoam TM VIEW An Initiative by Elitecore Technologies Pvt. Ltd.

Intelligent Logging & Reporting www.cyberoam-iview.com Cyberoam iView is the trademark of Elitecore Technologies Pvt. Ltd.