Embed Size (px)
Citation preview
This drawing is copyright to Prolam
283 Waiwhero RoadMotuekaNew Zealand(03) 526-7436www.prolamnz.com
Prolam PLX20 Lintel Purlin Cleat Uplift FixingDouble Top PlateMiTek CPC80 / Pryda NPCC8 Drawn
Date
Scale SheetNot to Scale
May 2021
ZK
Original size A3 S1of
Referencemuxjjzzn
4
Top View
Side View
60 mm
20 mm20 mm
20 mm
Second Top Plate
CPC80 / NPCC8Both Sides
Rafter/Truss
Top Plate
PLX20 Lintel
PLX20 Lintel
Second Top Plate
Top Plate
Rafter/Truss
CPC80 / NPCC8Both Sides
PLX20 Lintel
Second Top Plate
Top Plate
Rafter/Truss
CPC80 / NPCC8Both Sides
2 x Bowmac StudLok SL170 screwseach side
2 x Bowmac StudLok SL170 screwseach side
2 x Bowmac StudLokSL170 screws each side
Steel Plate
Steel Plates
Accurately position the StudLok screws at 20mm edge distance as shown. Take care whiledrilling to prevent the steel plate from damaging the screw threads.
Top View
Side View
60 mm
20 mm20 mm
20 mm
PLX20 LintelTop Plate
Rafter/Truss
CPC80 / NPCC8Both Sides
PLX20 Lintel
Top Plate
Rafter/Truss
CPC80 / NPCC8Both Sides
4 x Type 17-14g x 35mm Screwseach side
2 x Bowmac StudLok SL125 screwseach side
2 x Bowmac StudLok SL125 screwseach side
Steel Plate
Accurately position the StudLok screws at 20mm edge distance as shown. Take care whiledrilling to prevent the steel plate from damaging the screw threads.
This drawing is copyright to Prolam
283 Waiwhero RoadMotuekaNew Zealand(03) 526-7436www.prolamnz.com
Prolam PLX20 Lintel Purlin Cleat Uplift FixingSingle Top PlateMiTek CPC80 / Pryda NPCC8 Drawn
Date
Scale SheetNot to Scale
May 2021
ZK
Original size A3 S2of
Referencemuxjjzzn
4
Top View
Side View
60~100 mm
20 mm20 mm
20 mm
PLX20 Lintel
Second Top Plate
Top Plate
Rafter/Truss
CPC40 / NPCC4Both Sides
PLX20 Lintel
Second Top Plate
Top Plate
Rafter/Truss
CPC40 / NPCC4Both Sides
1 x Bowmac StudLok SL170 screwseach side
1 x Bowmac StudLok SL170 screwseach side
Steel Plate60~100 mm
Accurately position the StudLok screws at 20mm edge distance as shown. Take care whiledrilling to prevent the steel plate from damaging the screw threads.
This drawing is copyright to Prolam
283 Waiwhero RoadMotuekaNew Zealand(03) 526-7436www.prolamnz.com
Prolam PLX20 Lintel Purlin Cleat Uplift FixingDouble Top PlateMiTek CPC40 / Pryda NPCC4 Drawn
Date
Scale SheetNot to Scale
May 2021
ZK
Original size A3 S3of
Referencemuxjjzzn
4
Top View
Side View
60~100 mm
20 mm20 mm
20 mm PLX20 LintelTop Plate
Rafter/Truss
CPC40 / NPCC4Both Sides
PLX20 Lintel
Top Plate
Rafter/Truss
CPC40 / NPCC4Both Sides
2 x Type 17-14g x 35mm Screwseach side
1 x Bowmac StudLok SL125 screwseach side
1 x Bowmac StudLok SL125 screwseach sideSteel Plate
60~100 mm
Accurately position the StudLok screws at 20mm edge distance as shown. Take care whiledrilling to prevent the steel plate from damaging the screw threads.
This drawing is copyright to Prolam
283 Waiwhero RoadMotuekaNew Zealand(03) 526-7436www.prolamnz.com
Prolam PLX20 Lintel Purlin Cleat Uplift FixingSingle Top PlateMiTek CPC40 / Pryda NPCC4 Drawn
Date
Scale SheetNot to Scale
May 2021
ZK
Original size A3 S4of
Referencemuxjjzzn
4
PRODUCER STATEMENT
PLX20 BEAMS
ISSUED BY: Tasman Consulting Engineers Limited
TO: Prowood Limited
IN RESPECT OF: PLX20 BEAMS – UPLIFT FIXINGS
Tasman Consulting Engineers Limited has been engaged by Prowood to review the design of the uplift fixings as described on the drawings titled “Prolam PLX20 Lintel Purlin Cleat Uplift Fixing” (4 sheets) as prepared by PROLAM and dated May 2021.
These drawing specify the additional fixing requirements for the PLX20 beams when using the Mitek CPC80/40 and Pryda NPCC8/4 brackets.
I believe on reasonable grounds that the design will meet the requirements of clauses B1/VM1 of the Building Code Documents, provided that the construction is in accordance with the drawings and the proprietary products meet their performance specification requirements.
David King ME(civil), CMEngNZ CPEng (no 145511) IntPE
For Tasman Consulting Engineers PO Box 3631, Richmond, NELSON 7050
10 May 2021
