Upload
ben-wiggins
View
219
Download
0
Embed Size (px)
Citation preview
8/3/2019 CP 2622 Product Brochure - Ship Sludge Treatment Chemical
1/9
BENEFITS Efficient
Low-cost
Easy to apply
Environmentally friendly
Inversion of cut to 95% oil / 5% water
Cuts sludge disposal costs
Clear oil / water split
CP 2622 remains in oil phase and not
lost when removing water cut
Greater distances between tanking off
Versatile can be used on almost any
ship
Turns a by-product into a valuable
commodity.
With 95% oil content improves on-board
incineration.
And, by cutting waste and recycling run-off
sludge oil, CP 2622 can also ensure that the
maritime industry is kinder to the
environment.
Information Technology Solutions
DESCRIPTIONCP 2622 has been specifically designed for the
shipping industry, Chemiphase International
sludge conditioner can help maritime operators
reclaim the expense of dealing with tank sludge,
bilge water and slop oil.
CP 2622 consists of a carefully formulated
mixture of demulsifying chemicals that force the
water and solids away from the oil. When
separated the water forms a forms a clear layer
below the oil which can be drained off, leaving
a dry clear oil. By the time the process is
complete, the oil mixture comprises ofapproximately 10% water and 90% oil which can
then be sold as is or processed further using
mechanical oil/water splitters. This will then
create a commodity that most disposal
companies will pay for putting an end to
expensive sludge tank drainage.
From fishing fleets to cruise liners, this product is
extremely versatile and could be used across
the whole maritime industry. CP 2622 is ideal for
use in cargo or passenger ships which empty
their sludge tanks every 2-3 days.
CP 2622 contains a unique blend of chemicalsthat combine to form the most effective
demulsifier on the market. You can be sure you
will maximize the value of your sludge oil for the
most cost effective solution.
PACK SIZES
AVAILABLE
20 LITRES
200 LITRES
1000 LITRES
TECHNICAL
SUPPORT
Chemiphase
International will
offer on- site
technical support
during all stages of
production.
Technical support
includes on-site
testing and results.
PRODUCT SAFETY
All Chemiphase
International
products are
thoroughly
researched andtested. All products
are also COSHH
registered and
come complete with
delivery.
For more information
on any of our
products or services
please visit us on the
Web at:
www.chemiphase.co.uk
Phone :+44 (0) 8456 432900
Email :[email protected]
Ship Waste Treatment
Sludge Conditioner
CP 2622
8/3/2019 CP 2622 Product Brochure - Ship Sludge Treatment Chemical
2/9
How To Use
CP 2622 Ship sludge conditioner is easy to use. In essence sludge conditioner is added to thetank, left for 2-3 days, and then heated to 65-85C, using the standard heating equipment
fitted to the ship. After this, the water can be drained off.
The quantity required to treat the sludge depends on the capacity of the sludge tank or the
volume of the sludge normally disposed of onshore.
Capacity of Sludge Tank Quantity of CP2622 Required (2000 ppm)
10,000 Litres (2641 US gallons) 20 Litres
20,000 Litres (5282 US gallons) 40 Litres
50,000 Litres (13,205 US gallons) 100 Litres
Once added, the product will mix naturally with the incoming sludge, aided by the normal
motion of the ship.
CP 2622 is oil soluble and will remain in the sludge oil throughout its time in the sludge tank. If
the correct dose of conditioner has been used, this will continue to act on new incoming
sludge as before. If there is no separation of the new incoming sludge then more conditioner
can be added at any stage. This process of heating/ cooling/ draining can be repeated over
a period of several days for maximum efficiency.
DISCLAIMER :The information and all further technical advice is based on our present knowledge and experience.
However, they imply no liability or other legal responsibility on our part, including with regards to existing
third party intellectual property rights, especially patent rights. In particular, no warranty, whether expressor implied of guarantee of product properties is intended or implied. We reserve the right to make any
changes according to technological progress or further developments. The customer is not released from
the obligation to conduct careful inspection and testing of incoming goods. Performance of the product
described herein should be verified by testing, which should be carried out by qualified experts in the sole
responsibility of the customer.
PRODUCT RANGE :
FUEL TREATMENT
FUEL CETANE
ENHANCEMENT
BIOLOGICAL
CONTROL
SOOT CLEANER
SOOT CLEANER LIQUID
SHIP MAINTENANCE
DECK CLEANER
CEMENT REMOVER
LIME CLEANER
TANK CLEANER
SLOP OIL TREATMENTPENETRATING OILS
GENERAL CLEANING
CARBON REMOVER
DESCALER LIQUID
OIL SPILL
EMULSIFIER
OIL AND GREASE
REMOVER
LIQUID SOAP
HAND CLEANER
ODOUR CONTROL
TANK CLEANING
TANK CLEANER
SOLVENT TANK
CLEANER
BOILER WATERTREATMENT
ALKALINITY CONTROL
BOILER SLUDGE
CONDITIONER
PHOSPHATE CONTROL
Ship Waste Treatment
Sludge Conditioner
CP 2622
8/3/2019 CP 2622 Product Brochure - Ship Sludge Treatment Chemical
3/9
Ca
Ship Name : Stena
Fuel Type 380 cst
Customer of Chemi
Contact - Don Ma
Stena Line Europe
excellent results.
Below is a brief ex
when handling slud
Stena have mod
lubricating oils wit
This has resulted in
substantial cost sa
Sludge Tank
The main sludge t
above the tank.
This ship has two
above them. Onc
the main sludge t
Bilge Tank
Bilges are pumpe
separator rises it d
A Bilge holding tabove 15 ppm be
The main tank has
e Study
ine Europe
phase International for 10 Years
lean (Chief Engineer of Stena Europe)
ave been using Chemiphase Internationals
lanation of how they use the product and
ge :
ified their internal tanking system to pro
in the ship.
longer time intervals between discharge int
ving.
ank collects the oil/water from the Heavy F
MT Lubricating Oil sludge tanks, each cont
e a week the contents of the Lubricating Oil
nk.
to a bilge holding tank via a 100 ppm sep
umps this oil/ water mixture to the main sludg
nk pumps overboard via a 15ppm filter,ing directed to the main sludge tank.
a steam coil and can be heated.
32
CP 2622 for over 10 years with
a brief outline of their process
cess sludge, slop and waste
port side collection tanks and
el Oil Purifier which sits directly
aining a Lubricating Oil Purifier
Sludge tanks are transferred to
rator. Once the oil level in this
e tank.
with anything fluid registering
8/3/2019 CP 2622 Product Brochure - Ship Sludge Treatment Chemical
4/9
Separation Tanki
This tank is wher
with Chemiphas
The tank is heat
regular intervals
CP2622.
The water that i
bilge holding tan
Discharge Tank
Once the separ
discharge tank,
road tanker.
This final waste oi
Chemiphase Inter
Unit 2 Ringtail Ind
Tel : +44 (0)8456)
Web : www.rsintl.
UK Cost of p
Annual qua
Cost per m
Cost per an
10 ships
CP-2
the
worki
are e
Example: F
C
g
our main separation takes place. It is filled
Internationals CP 2622 dosed directly at thi
ed to about 70 degrees and left to separ
during the day to run off the water that h
removed is sent back to the bilge, and e
k and discharged to sea.
tion tank has been drained of water, we tra
which is the final holding place before we
l is dry and contains minimal water.
national Ltd
strial Estate, Burscough, Lancashire, L40 8JY
32 900 Fax : +44 (0) 1744 886633
u / www.chemiphase.co.uk Email : sales@c
Before CP-2622
umping slop oil 50/ MT
tity: Every 3 days x 10 MT
nth: 5,000
um: 60,000
600,000
622 is designed to remain in
oil phase so it will keep
ing until the tank contents
mptied.
rry Services
se Study
from the Main Sludge Tank
is point.
te. The tank is drained at
s been separated by the
ventually ends up back in
sfer the waterless oil into a
discharge to our onshore
emiphase.co.uk
Using CP-2622
50/ MT
Every month 10 MT
500
6,000
60,000
432
8/3/2019 CP 2622 Product Brochure - Ship Sludge Treatment Chemical
5/9
Revision date: March 2015
SAFETY DATA SHEET
CP 2622 (Ship Sludge Conditioner)
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY UNDERTAKING
PRODUCT NAME: CP 2622 Raw Material (Ship Sludge Conditioner)
PRODUCT Description: Raw Material
APPLICATION Ship Sludge Conditioner
SUPPLIER Chemiphase LtdUnit 2 Ringtail Industrial EstateBurscoughLancashire, L40 8JY
T: +44 (0) 01744 886622F: +44 (0) 01744 886633
EMERGENCY TELEPHONE (24 HR) 00 44 (0) 1744 886622
2. COMPOSIITON INFORMATION ON INGREDIENTS
NAME EC No CAS No CONTENT CLASSIFICATION
2-BUTOXYETHANOL 203-905-0 111-76-2 8-15% XnR20/21/22 Xi,R36/38
XYLENE 215-535-7 1330-20-7 15-22% R10 Xn, R10/R20/21 Xi,R38 & S16
The Full Text for all R- Phrases are displayed in Section 16
3. HAZARDS IDENTIFICATION
Harmful by inhalation, in contact with skin and if swallowed. Irritating to eyes and skin.
CLASSIFICATION Xn; R20/21/22. Xi;R36/38
4. FIRST AID MEASURES
GENERAL INFORMATIONMove the exposed person to fresh air at once. Get medical attention if any discomfort continues.
INHALATIONMove the exposed person to fresh air at once. If respiratory problems, artificial respiration/oxygen. Keep the affected person warmand at rest.Get prompt medical attention.INGESTIONNEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS! Remove victim immediately from source of exposure. Rinsemouththoroughly. Promptly get affected person to drink large volumes of water to dilute the swallowed chemical. DO NOT inducevomiting. Getmedical attention immediately.SKIN CONTACTRemove affected person from source of contamination. Promptly wash contaminated skin with soap or mild detergent and water.Promptlyremove clothing if soaked through and wash as above. Get medical attention immediately.
8/3/2019 CP 2622 Product Brochure - Ship Sludge Treatment Chemical
6/9
EYE CONTACTMake sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting theeyelids.Continue to rinse for at least 15 minutes and get medical attention.
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIAUse: Powder, Carbon dioxide (CO2). Water spray. FoamSPECIAL FIRE FIGHTING PROCEDURES
Avoid water in straight hose stream; will scatter and spread fire. Use water to keep fire exposed containers cool and dispersevapours. Keeprun-off water out of sewers and water sources. Dike for water control.SPECIFIC HAZARDSBy heating and fire, irritating vapours/gases may be formed.PROTECTIVE MEASURES IN FIREWear personal protective equipment. Wear self-contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONSWear protective clothing as described in Section 8 of this safety data sheet. Avoid contact with skin and eyes. Provide adequateventilation.ENVIRONMENTAL PRECAUTIONSDo not discharge into drains, watercourses or onto the ground.SPILL CLEAN UP METHODSStop leak if possible without risk. Absorb in vermiculite, dry sand or earth and place into containers. Containers with collectedspillage must beproperly labelled with correct contents and hazard symbol. Do not contaminate water sources or sewer.
7. HANDLING AND STORAGE
Usage precautionsAvoid spilling, skin and eye contact. Ventilate well, avoid breathing vapours. Use approved respirator if air contamination is aboveaccepted level.STORAGE PRECAUTIONSStore in tightly closed original container in a cool dry well-ventilated place. Use container made of : Stainless steel. Suitable plasticmaterial.Do NOT use container made of: Carbon steel.
8. EXPOSURE CONTROL/PERSONAL PROTECTION
Name Std LT - ppm LT mg/m3 ST - ppm ST mg/m3
XYLENE OES 50 ppm (Sk) 220 mg/m3 (Sk) 100 ppm(Sk) 441 mg/m3(Sk)
2-BUTOXYETHANOL OES 25 PPM(Sk) 50 ppm(Sk)
INGREDIENT COMMENTSOES = Occupational Exposure Standard. 2 Butoxyethanol (EGMBE) has a Biological Monitoring Guidance Value. See UK HSEEH40 Table 3
PROTECTIVE EQUIPMENTGoggles and Gloves
ENGINEERING MEASURESProvide adequate general and local exhaust ventilation
RESPIRATORY EQUIPMENTNo specific recommendation made, but respiratory protection may still be required under exceptional circumstances when excessiveaircontamination exists. Wear respiratory protection with combination filter (dust and gas filter).
HAND PROTECTIONUse protective gloves. Rubber, neoprene or PVC. The most suitable glove must be chosen in consultation with the gloves supplier,who can inform about the breakthrough time of the glove material. Be aware that the liquid may penetrate the gloves. Frequentchange is advisable.
8/3/2019 CP 2622 Product Brochure - Ship Sludge Treatment Chemical
7/9
EYE PROTECTIONWear approved safety goggles.
OTHER PROTECTIONWear appropriate clothing to prevent any possibility of liquid contact and repeated or prolonged vapour contact.
HYGIENE MEASURESDO NOT SMOKE IN WORK AREA! Wash at the end of each work shift and before eating, smoking and using the toilet. Washpromptly with soapand water if skin becomes contaminated. Promptly remove any clothing that becomes contaminated. When using do not eat, drinkor smoke.
9. PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE Liquid
COLOUR Slightly hazy
ODOUR:Slight Aromatic
Boiling Point/ range(
O
C)137-143
MELTING POINT (Oc) Pour Point , -20 RELATIVE DENSITY 0.990 @ 20 OC
Ph, VALUE,DILUTED SOLUTION 6.5-8.5, 5% in water VISCOSITY < 100 mPas @ 20oC
FLASH POINT (OC) 25 AUTOFlammability (OC) 480
10. STABILITY AND REACTIVITY
STABILITYStable under normal temperature conditions.
CONDITIONS TO AVOIDAvoid heat, flames and other sources of ignition
MATERIAL TO AVOIDStrong oxidising substances. Strong acids
HAZARDOUS DECOMPOSITION PRODUCTSDuring fire, toxic gases (CO, CO2) are formed.
11. TOXICOLOGICAL INFORMATION
TOXIC DOSE 1 LD50 >4000 mg/kg (oral rat)
INHALATIONHarmful by inhalation. In high concentrations, vapours are anaesthetic and may cause headache, fatigue, dizziness and centralnervous systemeffects. Upper respiratory irritation. Vapours may cause headache, fatigue, dizziness and nausea.
INGESTIONHarmful if swallowed. Gastrointestinal symptoms, including upset stomach. May cause nausea, headache, dizziness andintoxication.
SKIN CONTACTHarmful in contact with skin. Irritating to skin.
EYE CONTACTIrritating to eyes. Spray and vapour in the eyes may cause irritation and smarting.
Other Health EffectsNo sensitising effects known.
8/3/2019 CP 2622 Product Brochure - Ship Sludge Treatment Chemical
8/9
12. ECOLOGICAL INFORMATION
ECOTOXICITYThe product components are not classified as environmentally hazardous. However, this does not exclude the possibility that largeor frequentspills can have a harmful or damaging effect on the environment.
MOBILITYThe product is insoluble in water
BIOACCUMULATIONNo data available
DEGRADABILITYThe product is expected to be biodegradable
WATER HAZARD CLASSIFICATIONWGK 1
13. DISPOSAL CONSIDERATIONS
GENERAL INFORMATIONEmpty containers should be taken for local recycling, recovery or waste disposal
DISPOSAL METHODSRecover and reclaim or recycle, if practical. Do not allow runoff to sewer, waterway or ground. Dispose of waste and residues inaccordance withlocal authority requirements.
WASTE CLASSFor this product, in accordance with the European Waste Catalogue (EWC), a catalogue number cannot be given because thecustomer has to laydown the purpose first. The catalogue number has to be given according to the local waste removal processes.
14. TRANSPORT INFORMATION
GENERAL ADR/RID UN no: 1307 ADR Class: 3
Packing Group: III Classification code: F1
Shipping name n/a
Labelling: 3 Hazard ID no: 30IMDG/IMO UN no: 1307 Class: 3
Packing Group: III EMS:F-E, S-D
Marine Pollutant: NO Labelling: 3
IATA/ICAO UN no: 1307 Class: 3
Packing Group: III Packing Instructions; 309(p&CA):310(CAO)
Marine Pollutant: NO Labelling: 3HS Code 270730
15. REGULATORY INFORMATION
LABELLING
X
8/3/2019 CP 2622 Product Brochure - Ship Sludge Treatment Chemical
9/9
Harmful
CONTAINS 2-BUTOXYETHANOL, Xylene
RISK PHRASES R20/21/22 Harmful by inhalation, in contact with skin and if swallowed
R10 FlammableR36/38 Irritating to eyes and skin
SAFETY PHRASES S36/37 Wear suitable protective clothing and gloves
S16 Keep away from sources of ignitionNO SMOKINGS60 This material and its container must be disposed of as hazardous waste
S23 Do not breathe vapour/spray
S26 In case of contact with eyes, rinse immediately with plenty of water and seemedical advice
S51 Use only in well-ventilated areas
S24/25 Avoid contact with skin and eyes
UK REGULATORY REFERENCESApproved Supply List
STATUTORY INSTRUMENTSChemicals (Hazard Information and Packaging) Regulations
APPROVED CODE OF PRACTICEClassification and Labelling of Substances and Preparations Dangerous for Supply. Safety Data Sheets for Substances andPreparations.
GUIDANCE NOTESOccupational Exposure Limits EH40. Approved guide to the classification and labelling of substances and preparations dangerousfor supply.
16. OTHER INFORMATION
REVISION COMMENTSGeneral revision
ISSUED BYCES
REVISION DATE MARCH 2015
REVISED SDS GENERATED MARCH 2010
RISK PHRASES IN FULL
R10 FlammableR20/21 Harmful by inhalation and in contact with skinR20/21/22 Harmful by inhalation, in contact with skin and if swallowedR36/38 Irritating to eyes and skinR38 Irritating to skin