3-Day Intensive Courses for Dental Technicians:Combined dentures and implant-retained dentures made of CoCrMowith precision fit using the SAE OKTA model cast procedureand the SAE spark erosion technique

Course Theme I (3-day course)Combined restorations made of CoCrMo using the single cast procedure – telescopic with friction bonding using friction pins and/or swivel latches or T-attachments in connection with SAE spark erosion.

Dates

Course Theme II (3-day course)Cast or CAD/CAM milled bar mesostructure made of CoCrMo on implants with passive fit through spark erosion and suprastructure using the single cast procedure with spark eroded SAE swivel latch and friction pins.

Erosion of an SAE T-attachment female component

CAD/CAM milled bar made of CoCrMo before passivation

Erosion of swivel latch fit

Passivation of the bar structure with SAE electrodes in the spark erosion machine

Erosion of friction pin fit

After passivation using SAE spark erosion / passive fit

SAE DENTAL VERTRIEBS GMBHLangener Landstraße 173 · D-27580 Bremerhaven Tel.: +49 (0)471 9 84 87 45 · Fax: +49 (0)471 9 84 87 44 E-Mail: info@sae-dental.de · Internet: www.sae-dental.de

Further course information: www.sae-dental.de

Sheffield Test Sheffield Test

Course I: On request Course II: On request

Basis Set - Class I – Model Casting In One Piece

The class participant receives: 1. 1 x “OK” (upper jaw) master cast (with 3 plastic stumps) 1 x copper electrode pair 30-1256 2. 1 x swivel latch pair CrCoMo (standard) 1 x swivel latch pair 30-1242 2 x plastic pattern 30-1241

3. 1 x precision-T-attachment set in titanium 45° (standard) 30-3900 and plastic pattern 30-1120

4. 1 x plastic profile short 30-6005

5. 1 x plastic centering mandrel 60-1003 1 x centering pin 60-1001

6. 1 x copper electr. f. Precision-T-attachment will only be put 30-1129 7. 1 x friction pin 0,9 at the disposal 30-1054 8. 1 x copper electrode 0,8 partially 30-1004

1 x 2º bur- cross-geared with groove 70-1017 1 x class folder/instructions 1 x diploma for participation with signature Rübeling and class manager

The above mentioned parts, model and class cast, will be the property of the participant after termination of the class!

Tools and burs will be put at the disposal by the class laboratory!Investment, silicone, wax and plastic will be put at the disposal by the class laboratory resp. by SAE!

Training Class I

C:\Users\Kay_2\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.Outlook\T0MH8BHC\Class I Training.DOC April 2001

Location: Bremerhaven – Germany Classes in English

Training Class I THREE-DAY HANDS-ON INTENSIVE TRAINING CLASS

Biocompatible dental restorations cast in the SAE one-piece method in a CrCoMo alloy, combined with spark erosion machined SAE-Attachments. With special materials and equipments and supported by a slide presentation and manuscript, our qualified staff will show you how to manufacture a combined dental restoration made of CrCoMo alloy, using the method of SAE-Spark-Erosion and the micro plasma and laser welding technique. Training program: The participants will fabricate a cast framework situated on a master model with three abutments, incorporating SAE-Attachments. The master model and framework are provided. Each participant may choose from the following attachments each: SAE-Swivel-Latch SAE -Special-T-Attachment or SAE Individual Attachment incl. Friction Pins along with two SAE Telescopic Crowns and Friction Pins. The choice of attachment should be announced via fax (4 weeks prior to class begin), in order for us to co-ordinate preparations accurately. Purpose of the intensive training: - the fabrication of perfectly seated metal framework casts in a base alloy using our experienced method of the horizontal one-piece casting technique, - the employment of the SAE-Spark-Erosion-Method and - the hands-on experience of this procedure by the participants All participants should be skilled in the fabrication of crowns and bridges and hold general knowledge of casting frameworks. This class is considered to be introductory. Instructors: Kai Popall Master Dental Technician Rainer Ziegenbein Dental Technician Sven Meyer Master Erosion Technician

Three-day intensive program

C:\Users\Kay_2\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.Outlook\T0MH8BHC\Class I.doc January 2005

Three-day intensive program Casting and manufacturing techniques of combined fixed and removable claspless

restorations using the spark erosion method, laser and plasma welding techniques

SAE one-piece casting technology In connection with the assembly of 1 SAE attachment and 2 SAE double crowns containing friction pins

Training Class I – Combined Restoration 1st day reception of participants set-up of work place and distribution of documentation slide presentation – abstract introduction explanation of the construction elements and working materials along with introduction to the SAE one-piece casting method wax–up of the primary framework, evaluation of the various aids lunch break mounting of wax-up on base former and investment slide presentation

finishing and milling of the primary construction elements model preparation, wax pattern and investment of secondary frame clinical cases in various designs

2nd day divestment and positioning of primary framework fabrication of milling model and milling of primary frames erosion machining of T-attachment recess duplication preparations and duplication using the SAE-System hands-on introduction to the one-piece cast method and the investment materials wax-up and sprueing of the horizontal one-piece cast investment and preparation for casting 3rd day demonstration prior to finishing and polishing of secondary framework detailed explanation of the spark erosion machine and it’s application erosion machining and investment of the various SAE-Attachments hands-on introduction to micro-plasma welding and laser welding complete analysis and comparison of the various construction designs discussion – diploma award

Purpose of the intensive training I

Purpose of the intensive training II

Basis Set - Class II Implant Meso - Suprastructure

The class participant receives: 1. 1 x “UK” (lower jaw) master cast (4 implants) with gingiva frame System: Straumann Octa System

2. 1 x silicone pre-embankment after wax set-up 3. 4 x model shell standard in the model 82-0081 4. 4 x implant replica 82-0101 5. 4 x plastic burn-out cylinder 82-0301 6. 8 x implant electrode 82-0201 7. 4 x screw 82-0080 1 x copper electrode pair 30-1256 8. 1 x swivel latch pair CrCoMo (standard) 1 x swivel-latch pair 30-1242 2 x plastic pattern 30-1241 9. 2 x plastic profiles medium straight 30-6002 10. 2 x plastic profiles short 30-6005 11. 1 x plastic centering mandrel 60-1003 1 x centering pin 60-1001

12. 1 x copper wire 82-0500 13. 1 x driver electrode 82-0524 14. 1 x driver implant replica 82-0523 15. 1 x copper electrode 0,8 30-1004 16. 1 x friction pin 0,9 CrCoMo 30-1054

1 x 2º-bur-cross-geared with groove 70-1017 1 x class folder/instructions 1 x diploma for participation with signature Rübeling and class manager

The above mentioned parts, model and class cast, will be the property of the participant after termination of the class!The participant receives also a cast with the task to insert the implant parts after instruction. Afterwards a gingiva frame will be made.This cast will be used for following classes and does not become property of the class participant! Tools and burs will be put at the disposal by the class laboratory! Investment, silicone, wax and plastic will be put at the disposal by the class laboratory resp. by SAE!

C:\Users\Kay_2\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.Outlook\T0MH8BHC\Class II Training.doc January 2005

Location: Bremerhaven – Germany Classes in English

TRAINING CLASS II THREE-DAY INTENSIVE TRAINING CLASS

Implant retained structures with the Secotec-Technique Purpose of the intensive training:

Fabrication of a cast – milled bar connection/mesostructure in CrCoMo on four implant abutments on teeth 43, 45 and 33 , 35 using a special model for erosion machining After completion of the mesostructure, the framework is treated with spark erosion to achieve a passive seat. Next the suprastructure, as a simple cast bar coverage is created in CrCoMo. The addition of two SAE Swivel Latches and two or three SAE Friction Pins is required. A full acrylic completion of the restoration does not occur during this class.

Instructors: Kai Popall Master Dental Technician Sven Meyer

C:\Users\Kay_2\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.Outlook\T0MH8BHC\Class II Training.doc January 2005

Location: Bremerhaven – Germany Classes in English

TRAINING CLASS II THREE-DAY INTENSIVE TRAINING CLASS

Implant retained structures with the Secotec-Technique Purpose of the intensive training:

Fabrication of a cast – milled bar connection/mesostructure in CrCoMo on four implant abutments on teeth 43, 45 and 33 , 35 using a special model for erosion machining After completion of the mesostructure, the framework is treated with spark erosion to achieve a passive seat. Next the suprastructure, as a simple cast bar coverage is created in CrCoMo. The addition of two SAE Swivel Latches and two or three SAE Friction Pins is required. A full acrylic completion of the restoration does not occur during this class.

Instructors: Kai Popall Master Dental Technician Sven Meyer

Training Class II

Implant retained structures with the spark erosion technology for passivation – passive fit –

Training Class II Implant-Retained Structures (Secotec-Technique)

C:\Users\Kay_2\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.Outlook\T0MH8BHC\Class II.doc January 2005

Training Class II Implant-Retained Structures (Secotec-Technique) 1st day Secotec-Technique: model containing four implant abutments for fabrication of the

mesostructure in CrCoMo slide presentation – application methods preparation of impressions model preparation for the erosion procedure slide presentation: fundamental rules to successfully provide patients with

mesostructures and suprastructures in a non-stress inducing manner, with optimal functionality and aesthetics

wax-up of bar construction and investment daily analysis 2nd day Mesostructure: cast bar construction in CrCoMo

processing – milling – polishing erosion machining – passive fitting analog procedure – suprastructure Fabrication of suprastructure in CrCoMo containing 2 swivel-latch attachments and 3 friction pins - preparation to duplicate the model containing the milled bar - duplication in silicon and model preparation - wax-up of suprastructure - investment using the SAE System

3rd day Framework cast in CrCoMo/suprastructure divest, try-on and finish of suprastructure

erosion treatment and assembly of 2 attachments and 3 friction pins using the laser and plasma welding method discussion – diploma award

Location of Training Class

Course location: SAE DENTAL VERTRIEBS GMBH - INTERNATIONAL - Langener Landstrasse 173 27580 Bremerhaven Germany Tel: + 49 471 9 84 87 - 45 Fax: + 49 471 9 84 87 - 44 Dates: Dates on request

Course Fees

Course I One-piece casting – combined restoration (3 days) incl. material and model, beverages and lunch € 693,28

plus VAT of 19% € 131,72 € 825,00 Dates: see above: 00 Course II Implant retained structures (3 days) incl. material and model, beverages and lunch € 739.50 plus VAT of 19% € 140,50 € 880,00 Dates:: see above Application requirements: Please sign and return the completed registration form by fax, post or email (just one applicant per registration form please). The course fees will be invoiced at the latest two weeks prior to course start date. Registration by telephone is unfortunately not possible. Please submit your application form at least 4 weeks prior to course start date. Applications cannot be withdrawn, but may be transferred to a colleague. Participants, who have signed up for the course but do not attend, are nevertheless obliged to pay the full course fees. Each participant will receive a certificate on completion of the course.

Course location: SAE DENTAL VERTRIEBS GMBH - INTERNATIONAL - Langener Landstrasse 173 27580 Bremerhaven Germany Tel: + 49 471 9 84 87 - 45 Fax: + 49 471 9 84 87 - 44 Dates: Dates on request

Course Fees

Course I One-piece casting – combined restoration (3 days) incl. material and model, beverages and lunch € 693,28

plus VAT of 19% € 131,72 € 825,00 Dates: see above: 00 Course II Implant retained structures (3 days) incl. material and model, beverages and lunch € 739.50 plus VAT of 19% € 140,50 € 880,00 Dates:: see above Application requirements: Please sign and return the completed registration form by fax, post or email (just one applicant per registration form please). The course fees will be invoiced at the latest two weeks prior to course start date. Registration by telephone is unfortunately not possible. Please submit your application form at least 4 weeks prior to course start date. Applications cannot be withdrawn, but may be transferred to a colleague. Participants, who have signed up for the course but do not attend, are nevertheless obliged to pay the full course fees. Each participant will receive a certificate on completion of the course.

Fax-Registration Form

Intensive Training Course Program SAE DENTAL VERTRIEBS GMBH

SAE Dental Vertriebs GmbH Sender/Address Langener Landstr. 173 27580 Bremerhaven Germany Fax: +49 471 9 84 87 – 44 Email: info@sae-dental.de Registration deadline is 4 weeks prior to course begin. In accordance with the regulations of the training courses held by SAE Dental Vertriebs GmbH, the following participant would like to register for the following courses: Class I __________________ Surname, first name: ______________________ ______________________ Class II __________________ Surname, first name: ______________________ ______________________ I am obliged to pay the course fees two weeks prior to course start date. I would like SAE to make a reservation for me at the hotel mentioned below: Arrival date: _______________ Departure date: _________________ Arrival by car by train by plane Arrival time: _________________ Atlantic Hotel Bremerhaven, Nordstrasse 80 Adena Hotel Bremerhaven, Am Leher Tor 2 (near to the laboratory) (city centre) __ Single room (incl. breakfast) € 65.00 __ Single room (incl. breakfast) € 73.50 __ Double room (incl. breakfast) € 87.00 __ Double room (incl. breakfast) € 92.00 I am aware that SAE Dental Vertriebs GmbH can cancel the above courses due to lack of participants up to three days before course begin. Any course fees already paid will be reimbursed. _________________________ ________________________________ Date/Signature Company stamp

Way to Rübeling Dental-Labor

Wegbeschreibung zum Rübeling Dental-Labor, Bremerhaven A 27 - Abfahrt Bremerhaven-Überseehäfen Richtung Überseehäfen geradeaus bis zur Unterführung. Die Fahrbahn ist jetzt noch zweispurig, an der Ampelkreuzung jedoch dreispurig. Sie ordnen sich links ein und biegen links in die Langener Landstraße ab – das Rübeling Dental-Labor liegt rechter Hand. Sie fahren daran vorbei und biegen in die nächste Straße rechts ab (Claus-Groth-Straße). Unser Firmenschild weist Ihnen den Weg zum Parkplatz.

Way to the “Rübeling Dental-Labor, Bremerhaven” A 27 - exit Bremerhaven-Überseehäfen Direction „Überseehäfen“ straight on to the underpass. Now the road has two lanes, but at the traffic lights three. You get in in the left lane and turn left into the “Langener Landstrasse”. Pass the “Rübeling Dental-Labor” on the right and turn into the “Claus-Groth-Strasse”. Our company sign shows you the way to the parking places.