COSASCO Bluetooth Suite - ASELCO

LPR Probe Reader Bluetooth Kit

The LPR Probe Reader Bluetooth Kit is a convenient and portable standard Linear Polarization Resistance (LPR) instrument kit for measuring corrosion rate in water systems. The LPR Probe Reader (LPR-100) directly connects to LPR Standard/Temperature probes*. Measurement readings are displayed and recorded by the Transfer Unit (TU-500). A cable is only required where access to a probe is difficult and an extension cable is used to position the LPR-100 at an easy access location. The LPR-100 may be read by the TU-500 from up to 60 ft. (20m) distance with clear line of site.

Bluetooth Communication

Easy data transfer via wireless bluetooth

Wireless range up to 60 ft (20m) line of siteNo more cables required

Corrosion Rate Measurements in Water Applications

Instantaneous corrosion rate readings

Pitting tendency reading from an electrochemical noise sampleTemperature Measurement

LPR-100 Shown with a 6080 LPR Probe

Solution Resistance Compensation

Cosasco Patented advanced electrochemical measurement technologyExtended operating range beyond traditional two and three electrode LPR methods

COSASCO® Bluetooth® Suite

*Some probes require an S to B probe adapter (included)

Hazardous Area Location Certified

Intrinsically safe ( IECEx/ATEX/CCSAUS)

Certified for use in class I, zone 1IP20 rated enclosure

LPR Probe Reader

Probe Adapter

Hollow PlugCosasco Flarweld

Access Fitting

LPR Probe

Transfer Unit

LPR Corrosion Monitoring Point: High Pressure (up to 6000 psi)

The above diagram shows the equipment required for a typical high pressure corrosion monitoring point using linear polarization resistance measurement technology. A typical LPR probe reading system consists of an LPR probe connected to a hollow plug and inserted into a Cosasco Access Fitting that has been welded onto the pipeline. The LPR probe can be installed and retrieved under full operating pressure using a Cosasco Retriever and Service Valve. The LPR-100 Probe Reader and Probe Adapter are placed into the probe. The TU-500 Transfer Unit communicates wirelessly with the LPR-100 to take a corrosion rate reading. Collected readings on the TU-500 can be downloaded wirelessly to a PC running Cosasco Data Offline Software for graphing and analysis.

High Pressure Retaining Cover


Typical System-High Pressure

LPR Corrosion Monitoring Point: Low Pressure (up to 1500 psi)

The above diagram shows the equipment required for a typical low pressure corrosion monitoring point using linear polarization resistance measurement technology. The electronic part of the LPR Probe reading system works the same as the high pressure system except it uses a retractable means of access. A standard weldolet is welded onto the pipeline and a ball valve is installed and remains in situ. A retractable probe is installed and retracted under full operating pressure using a Cosasco 60 Retractor Kit.


Typical System-Low Pressure

LPR Probe Reader

LPR Retractable Probe Weldolet

Ball Valve

1” NPT Nipple

Operating Range

LPR-100 SpecificationsCorrosion Rate Ranges 0 to 200 mpy

0-5000 µm/y0-5 mm/y

Imbalance Ranges (Pitting Index)

0-200

Temperature Measurement Range: 0ºC to 260ºC (0ºF to 500ºF) Accuracy: ±2ºC (does not include probe error)Repeatability: ± 1ºCResolution: 0.1ºC

Probe Compatibility 2 electrode LPR probe2 electrode LPR Temperature probe

Power Source 2 AA Lithium Batteries: P/N 095820, alternate P/N 095818 (do not mix)

Battery Life 2000 Probe Readings, typical4000 Probe Readings, optimal

Temperature Range Operating: -40ºF to 158ºF (-40ºC to 70ºC)Storage: -40ºF to 158ºF (-40ºC to 70ºC)

Dimensions 6.69”H x 2.4”W x 1.44”D (17 cm x 6.1 cm x 3.66 cm)

Enclosure IP20 Rated

Bluetooth Roaming Details: Range: 20m (60ft), typicalCommunications: Bluetooth Class v2.0 Approvals: FCC/IC/CE0539Antenna: Integrated 2 dBi typical, 4 dBi maximum

Hazardous Area Certification ATEX CertificationSIRA 14 ATEX 2262XEx ib IIC T4 Gb, Ta = -40ºC to +70ºC

IEC Ex Certification IECEx SIR 14.0095XEx ib IIC T4 Gb, Ta = -40ºC to +70ºC

North American CertificationsCSA Certification: 70007055CSAUS Class I, Zone 1, AEx ib IIC T4 Gb, Ta = -40ºC to +70ºCCCSA ib IIC T4 Gb, Ta = -40ºC to +70ºC

Dimensions2.4 in (6.1 cm)

6.69 in (17 cm)

1.44 In. (3.66 cm)


TU-500 Specifications

Dimensions3.35 In. (8.51 cm) 0.91 In. (2.31 cm)

6.24 In. (15.8 cm)

2.87 In. (7.29 cm)0.88 In. (2.24 cm)


Compatibility -All ER and LPR Dataloggers-MICROCOR® ER Datalogger-All legacy ER and LPR Remote Data Collectors and MICROCOR® ER Dataloggers-ER and LPR Probe Readers -ULTRACORR® 2 Reader/Datalogger-Ultracorr Sensors (when used with Ultracorr 2 Reader/Datalogger)

Memory Microcor ID’s 1-99 and all other ID’s 1-255

Data Transfer Bluetooth

Power Source 2 AA Lithium Batteries: P/N 095820, alternate P/N 095818 (do not mix)

Battery Life 2000 probe readings, typical for ER-1003000 probe readings, optimum for LPR-100

Display Four Line Liquid Crystal Display (LCD)

Temperature Range Operating: -40ºF to 158ºF (-40ºC to 70ºC)Storage: -40ºF to 158ºF (-40ºC to 70ºC)

Enclosure IP20 rated enclosure with sealed membrane keypad

Dimensions 6.24”H x 3.35”W x .91”D ( 15.8 cm x 8.51 cm x 2.31 cm )

Bluetooth Range: 20m (60ft), line of siteCommunications: Bluetooth Class v2.0Approvals: FCC/IC/CE0539Antenna: Integrated 2 dBi typical, 4 dBi maximum

Hazardous Area Certification ATEX CertificationSIRA 14 ATEX 2263XEx ia IIC T4 Ga, Ta = -40ºC to +70ºC

IEC Ex CertificationIECEx SIR 14.0096XEx ia IIC T4 Ga, Ta = -40ºC to +70ºC

North American CertificationsCSA Certification: 70007061CSAUS Class I, Zone 0, AEx ia IIC T4 Ga, Ta = -40ºC to +70ºCCCSA Ex ia IIC T4 Ga, Ta = -40ºC to +70ºC

Ordering InformationBluetooth Kit Part Number Description

LPR Probe Reader BT-1-0-0-1-0-0 LPR Probe Reader, Transfer Unit, S to B Probe Adapter, Test Probe, Batteries*, and User Manual

LPR Probe Reader with Cosasco Data Offline Software

BT-1-0-0-1-1-0 LPR Probe Reader, Transfer Unit, S to B Probe Adapter, Test Probe, Batteries*, User Manual, and Cosasco Data Offline Software

LPR Probe Reader plus ER Probe Reader BT-1-1-0-1-0-0 LPR and ER Probe Reader**, Transfer Unit, S to B Probe Adapter, Test Probe, Batteries*, and User Manual

LPR Probe Reader plus ER Probe Reader with Cosasco Data Offline Software

BT-1-1-0-1-1-0 LPR and ER Probe Reader**, Transfer Unit, S to B Probe Adapter, Test Probe, Batteries*, User Manual, and Cosasco Data Offline Software

*Batteries for all devices included in package** See Bulletin #112 for details on ER Probe Reader

ISO 9001:2008Certificate No. FM 10694

Cosasco11841 Smith AvenueSanta Fe Springs, CA 90670, USATel: 1-562-949-0123Email: [email protected] Site: www.cosasco.com

Bulletin #308 Rev. Date 1/25/2016

©Rohrback Cosasco Systems, Inc. All rights reserved

The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described wherein or their use or applicability. We reserve the right to modify or improve the designs or specifications of our products at any time without notice.

Rohrback Cosasco Systems Corrosion Monitoring Equipment is manufactured and sold under one or more of the following US Patents: 4138878, 4238298, 4338563, 4514681, 4537071, 4587479, 4605626, 4625557, 4755744, 4839580, 4841787, 4882537 5243297.

Accessories and Replacement Parts

Carrying Case Holds Transfer Unit, two

Probe Reader Modules and Legacy Converter

www.cosasco.com


Part Number Description

TU-500 Transfer Unit

ER-100 ER Probe Reader

LPR-100 LPR Probe Reader

726070 S to B Probe Adapter

028043 Portable Probe Adapter

726034 Carrying Case

AA Lithium Battery 095820

Standard ER Test Probe 723235

Standard LPR Test Probe 710764

Extension Cable See ER and LPR Probe Accessories Datasheet

Documents

COSASCO Bluetooth Suite - ASELCO