Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
4700 Calle Bolero • Camarillo, CA 93012 • www.wilwood.com • Sales: (805) 388-1188 • E-mail Tech Assistance: [email protected]
CORVETTE C5/C6/Z06DYNAMIC LUG-DRIVE
ROAD RACE BRAKE KITS
1997 - 2013
• 14.00” SV/GT series staggered 72 curved vane Spec37 alloy front rotors deliver the highest degree of thermal stability and cooling efficiency
• 13.06” GT series 48 curved vane Spec37 rear rotors
• Hard anodize rotor mounting hats include replaceable stainless steel wear plates for extended service life
• BP-30 race compound SmartPads
AERO6R/ST - FRONT
P/N 140-16202 P/N 140-16181 P/N 140-16208
AERO4R/ST - FRONT FNSL4R/ST - REAR
• Lug-drive, floating rotor system eliminates rotor bolts, thread lockers, safety wire, and removes all thermally generated stress from a traditional hat for optimal pedal feel
• Choice of four or six piston front caliper kits for sanctioning body rules compliance
• “ST” series forged aluminum radial-mount calipers with Thermlock® pistons, internal damper springs, and Type III Mil-Spec hard anodize finish for maximum heat control, consistent pedal height and long-wearing abrasion resistance
• Single, stainless steel snap-ring retention accommodates new rotor replacement in under a minute
• Dynamic rotor mounting allows independent movement of the rotor and hat through heat cycles to remove distortion-induced stress at the mounting points
• Rotors stay flatter and run truer creating smoother, vibration-free performance
• Rotors with hats shipped pre-assembled in kits
Lug-Drive Hat & Rotor System
4700 Calle Bolero • Camarillo, CA 93012 • www.wilwood.com • Sales: (805) 388-1188 • E-mail Tech Assistance: [email protected] • REV DATE: 11/20/2020
CORVETTE C5/C6/Z06DYNAMIC LUG-DRIVE
ROAD RACE BRAKE KITS
1997 - 2013
6 PISTON
EXISTING STEERING
ARM / SPINDLEASSEMBLY
CALIPER MOUNTING BRACKET BOLT KIT
CALIPERMOUNTING
BRACKET
BRAKEPADS
CALIPER
DYNAMIC LUG-DRIVEGT SLOT PATTERN
COMPETITION HAT & ROTOR
ASSEMBLY(pre-assembled)
CALIPERMOUNTINGBOLT KIT
4 PISTON
CALIPERMOUNTING
BRACKET
DYNAMIC LUG-DRIVEGT SLOT PATTERN
COMPETITION HAT & ROTOR
ASSEMBLY(pre-assembled)
BRAKEPADSCALIPER
CALIPERMOUNTINGBOLT KIT
CALIPER MOUNTING BRACKET BOLT KIT
EXISTING AXLE / HUBASSEMBLY
Front Kit
Rear Kit
ORDERING INFORMATION: 1997 - 2013 Corvette C5/C6/Z06 Dynamic Lug-Drive Road Race Kits
PART NUMBER DESCRIPTION CALIPER FINISH
220-8177 N/AFlexline Kit, All 1997 - 2004 C5 Rear, Jacketed Stainless Steel Braid Hose
220-8176 N/AFlexline Kit, All 1997 - 2004 C5 Front, Jacketed Stainless Steel Braid Hose
140-16202 Hard Anodize Gray140-16181 Hard Anodize Gray
Aero6R/ST Six Piston Front Kit, 14.00” SV-GT 72 Curved Vane Spec37 Competition Rotors
Aero4R/ST Four Piston Front Kit, 14.00” SV-GT 72 Curved Vane Spec37 Competition Rotors
140-16208 Hard Anodize GrayFNSL4R/ST Four Piston Rear Kit, 13.06” GT 48 Curved Vane Spec37 Competition Rotors
220-9101 N/AFlexline Kit, All 2005 - 2013 C6 Front, Jacketed Stainless Steel Braid Hose
220-9100 N/AFlexline Kit, All 2005 - 2013 C6 Front, Jacketed Stainless Steel Braid Hose