Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Food Manufacturing
Gas Manufacturing
Offshore
Sugar and Alcohol
Metals and MiningFood Manufacturing
Offshore Oil Offloading TowerGas Transport Plant
Offshore Oil Offloading Tower
Energy Port
Onshore
5.5 KG/12 lbs
1.2KG/ 2lbs
22KG / 50lbs
Polymelt 12
Polymelt Service Gun
Polymelt 50 ATEX
04
Onshore Storage Wellheads
Riser Turret Flange Protection in offshore
Gate valves, Ball valves & Flanges for Climate Change
Protecting 155 Flanges on shore
Protection of Agitator Tank with Stainless Steel Bolts and Nuts
16 well head corrosion prevention & bolted structures
Application to seal the cooker floor area
Protecting steel beam to concrete interfaces
Flange, Bolts & Conduction Protection Storage
MiningBearing shalft & Bearing drum for
Conveyor belt
Avoid Premature Damage of Housing Bearing
Protection for drain valves
Food ManufacturingProtecting 22 Housing bearings
Total of 114 Flanges with Bolts protection
Critical Valves & Flanges caused by harsh environment
Encapsulating the entire joint rectangular edge
Modern Fishing VesselCorrosion protection for Flanges,
Couplings, Panels, etc.
Protecting the Electrical Points to Prevent Ingress Moisture
Offshore PlatformPipe work Field Joints offshore
application
TM 198 - ANTI CORROSION THERMOPLASTIC COATING
Offshore Platform
Petrochemical
Protecting Multiple Flanges and Valves in a Chlorine-Alkali Equipment
Offshore Platform
To protect vulnerable flanges from environmental exposure of SF6 gas
Combine Heat and Power Plant
E P t
Offshore
Protecting Wellheads offshore platform
Protecting Wellheads offshore platform
Offshore
Steel Manufacturing
Cost Reduction from decay of Ammonia Valves and Site Cooling
Tower Pipe run and Flange protection
Offshore Oil Offloading TowerGate valves, Ball valves & Flanges
for Climate Change
Offshore
2175pcs. of Flange Maintenance to reduce spiraling maintenance cost
Offshore
OnshoreProtection of Nuts and Bolts on Monopile
Supports for Electricity Pilons
Oxifree has a dielectric strength of 14KV/mmOOOOOOOxOxOxOxOOxOxxOxOxxOxifififiifiififififffifreererererreerereeeeeeeeeeeeeee e e eeeeee ee hahhahahhahhhhhhhhh s s s s a a a aaaaaaa didididididididddiieleleleleleleleleleleee ececececccccccccccececcececctrtrtrtrttrtrttrtrtrtrtrrtrtrt iciciciciccicicicicccicciicc sssssssssstrtrtrttrtrtt eenenne gth of 14KV/mmmmmm
in 2009With our head office in Frimley, Surrey and supported by regional
offices in Houston, Texas and Kuala Lumpur, Malaysia, Oxifree Metal
Protection has been established to tackle the global cost of corrosion
which affects all sectors of industry.
Oxifree TM 198 material was developed for use to combat the
worldwide corrosion issues that are faced by all industries and
infrastructures.
Specifically Oxifree TM198 offers a solution to protect complex
metallic structures for short or extended periods of time.
The Result of a 6 months Trial
ReusableOxifree material ca be reuse as long as it is not contaminated
ReliableExpands and contracts without crazing or cracking (Vibration Test)
Pressure Release
Combats Galvanic CorrosionOxifree eliminates electrochemical potential reaction
• Anti-corrosion protective coating can be applied to bolted flanges, valves bearing housings, critical pipeline connections, short and long term storage of strategic machine parts and metal surfaces regardless of size or shape exposed to
SpecificationHopper CapacityOperating Temperature Melt Rate (per hour) Temperature Control Stability Electrical Service Standard
SpecificationHopper Capacity Operating Temperature Melt Rate (per hour) Temperature Control Stability Electrical Service Standard
5.5 KG/12 lbs40 to 218°C / 104 to 425°F8kg/hr/17.3lb/hr±1°c/1°F220-240VAC 1 Phase 50/60Hz, 13 amps peak at 230v
22KG / 50lbs10 to 218°C / 50 to 425°F 41Kg/hr / 90lb/hr±1°c/1°F230V 1Ph 30A 50/60Hz230V 3Ph 16A 50/60Hz (optional)400V 3Ph WYE 16A 50/60Hz (optional)
SpecificationOperating TemperatureCapacityPower RequirementPower Consumption
Testing and CertificationHot Salt Fog Test
The ASTM B117 test was carried out demonstrate the corrosion inhibiting abilities of Oxifree.Our competitors have gone to an Industry standard maximum of 3000hrs, we have nearly quadrupled this time with outstanding results
Advantages
Recommended Use:
Paint Requirement (Sa 2.5)
Oxifree Requirement (St 2)
• Equipment and Typical process to reach Sa 2.5 standard
• Compressor 300 to 600CFM capacity• Blasting Pot• Blasting medium, sand or grit• Tarpaulins for protection of blasting medium• Protect sensitive adjacent equipment and personal• Breathing apparatus and blasting protection• Recovery of Spent Abrasive
• Equipment and Typical process to reach St 2 standard
• Wire-brushing (if necessary)• Clean surface of oil or grease/remove loose and
flake rust
1 2 3
Oxifree TM198 Polymelt 12
Polymelt50 ATEX
Polymelt Service Gun
Oxifree Machines
Established Oxifree TM198
Corrosion inhibitor oils act immediately and
actively protect when in contact with the metal
surface.
Organic thermoplastic coating provides full
encapsulation, blocking, ingress of
contaminants, moisture and oxygen.
Appearance Standard grey, semi-gloss surface or others on request
Melting point 120°C/ 248°F
Flashpoint Greater than 220°C/428°F
Coating Approx. 3.9Kg per sqm
Package 1 PAIL=12.5 kg
1 Pallet = 48 pail
Dielectric Strength
165 to 175°C/ 329 to 347°F (operating temperature should not exceed this)
Recommended Application Temperature
70°C -90°C / 158°F-194°F(-)60°C/58°F (minimum application temperature 0°C/32°F)
Max./Min. substrate operating temperature
185°C
2 x 43x40mm SG Pellets220-240V AC (optional 110V on request)450W
aggressive/corrosive working and storage environments.
• Metal Interfaces composed of different materials & metal surfaces affected by corrosion caused by exposure to chemical and maritime environments.
• Protection of mobile machinery and components, in short or long term storage.
• The flexible polymeric resin coating allows for easy removal, inspection and re-application during scheduled maintenance.