Upload
nguyenngoc
View
215
Download
0
Embed Size (px)
Citation preview
ADG7 Corrigendum 1
ii
Purpose of this document
In producing the printed version of the 7th edition of the Australian Code for the Transport of Dangerous Goods
by Road & Rail, a number of printing errors occurred in the publication process. These errors are where what is
in the printed version of the Code (and in the version of the Code that was published on CD in 2007, and on the
National Transport Commission ("NTC") website) differs from the version of the Code that was approved by
the Australian Transport Council. This document corrects those errors.
An instance has also been discovered where the approved version of the Code contains a difference from the
United Nations Model Regulations (on which it was based) that was not deliberate, and this error is also
corrected in this document. Also, it was also thought appropriate to update information in the Code that relates
to such things as contact details for various government offices.
Authority of this document
This document is published by the NTC. The NTC is also the publisher of the Code. When corrected as
directed by this document, the Code will be in the form in which it was approved by the Australian Transport
Council, with the exception that, as described above, it will also include updated details of incidental matters.
Corrected version of the Code
It is unlikely that a hard-copy version of the Code that incorporates the correction of the errors identified in this
document will be published in the near future. However, in conjunction with the publication of this document,
the NTC published on its website (www.ntc.gov.au) an electronic version of the Code that incorporates the
correction of the errors identified in this document. That version also identifies all the differences that exist
between it and the printed version of the Code.
How this document differs from How the 2011 Electronic Version differs from the 2007 Printed Version
On the same day that it published this document, the NTC also published a document entitled How the 2011
Electronic Version differs from the 2007 Printed Version. That document is essentially the same as this
document, and sets out almost the same information that is set out in this document. However, it is designed to
be used by people who use the new electronic version of the Code as their primary reference source. That
version of the Code shows in red coloured font all the changes that are set out in this document. To find some of
the differences in the printed version of the Code, it is sometimes necessary to have more identifying
information available. Also in some cases, the same difference appears on different page numbers in the 2
versions. It should be noted that the Differences document was produced for information purposes only – this
document (Corrigendum 1) is the authoritative version of the corrections to the Code.
How this document is organised
In this document, the provisions where each correction occurs is identified, arranged in the sequence in which
they are encountered in the Code. The error which needs to be corrected is then identified, the correction is set
out, and where it was thought to be helpful, an explanation has also been included.
The NTC gratefully acknowledges the assistance of Greencap Consulting (Previously Noel Arnold &
Associates) in the preparation of this document.
ADG7 Corrigendum 1
1
Corrigendum 1
Document amended by this Corrigendum
This Corrigendum sets out corrections that are to be made to the 7th edition of the Australian Code for the Transport
of Dangerous Goods by Road & Rail, as published in 2007 by the National Transport Commission.
Use of symbol ""
In this document, if the following formulation appears: "‘expression1’‘expression 2’", it is to be read as if it
stated: "for ‘expression 1’ substitute ‘expression 2’".
General change
The Code used ellipses ("…") to indicate that the text of the Code did not include words that were in the UN Model
Regulations. All ellipses used for that purpose should be removed from the Code.
Specific changes
The following specific changes should be made to the Code:
Introduction
Page Provision Error Correction Comment
vii Readers‘
Guide
Invalid
statement
Omit the last sentence on this page (the
sentence starting ‘Where the substance…’).
Final sentence on page vii applied
only to draft Code but was not
removed from the final text
PART 1
Page Provision Error Correction Comment
3 1.1.1.1 NOTE Punctuation ‘)”’‘.’ at the end of note
4 1.1.1.2
NOTE (4)
Update of
information 1) After ‘tools of trade’ insert an asterisk.
2) At the bottom of the page insert the
following footnote:
*Tools of trade concessions may not have
been adopted by some jurisdictions. Refer
to the relevant state or territory
legislation.
Draws attention to the
fact that at least 2
States and Territories
have not adopted the
Tools of Trade
provisions of the Model
Subordinate Law
6 1.2.1.1 Definition
of Category
Incorrect
cross
reference
‘1.2.1.2.2’‘1.2.1.2.17’
ADG7 Corrigendum 1
2
PART 1
Page Provision Error Correction Comment
6 1.2.1.1 Definition
of Class
Incorrect
cross
reference
‘1.2.1.2.2’‘1.2.1.2.17’
11 1.2.1.1 Definition
of Model Subordinate
Law
Missing
word After ‘(see’ insert ‘also’ Makes it clear that the
definition of
Regulations is an
additional, not
alternative, definition
15 1.2.1.1 Definition
Source of Ignition
Obsolete
Standard ‘AS/NZS 60079.10’‘AS/NZS 60079.10.1’ Replaced by reference
to current Standard
15 1.2.1.1 Definition
of Tank Vehicle
Punctuation ‘.’‘;’
16 1.2.1.1 Definition
of Ullage
Word
spacing ‘netvolumeofcontents’‘net volume of
contents’
22 1.2.2.1 table Inconsistent
footnote
markers
a.
*
b.
†
c.
‡
(Note: each expression to be substituted
appears twice on the page, and should thus be
substituted twice)
Made consistent with
remainder of Code
22 1.2.2.1 table entries
‗Force‘
‗Pressure‘
‗Energy‘
‗Power‘
‗Dynamic viscosity‘
Incorrect
expression
of units
1)‘1kg.m/s2’‘1kg.m/s2’
2)‘105 Pa’‘105 Pa’
3)‘1N.m = 1W.s’‘1N.m = 1W.s’
4)‘1N.m/s’‘1N.m/s’
5) In column 2: ‘Pa.s’‘Pa s’ 6) In column 3: ‘mPa.s’‘mPa s’ 7) In column 4:
‘1mPa.s = 10-3
Pa.s’‘1mPa.s = 10-3
Pa.s’
22 1.2.2.1 Footnote ‡
(this was formerly
footnote c)
Incorrect
descriptor ‘figure ―1‖’ ‘numeral ―1‖’
24 1.2.3.1 Definition of
Australian Explosives
Code
Update of
information 1) After ‘Explosives Code" insert an asterisk.
2) At the bottom of the page insert the
following footnote:
*The third edition of the Australian Explosives Code, now prepared by the Australian Forum of Explosives Regulators (AFER) and endorsed by the Workplace Relations Ministers’ Council, was published by the Commonwealth of Australia in 2009.
Draws attention to the
3rd
edition of AEC with
different publication
details
ADG7 Corrigendum 1
3
PART 1
Page Provision Error Correction Comment
26 Table 1.1 Obsolete
Standards 1) Omit ‘AS/NZS 2430 Classification of
hazardous areas (series)’.
2) For ‘AS/NZS 60079.10 Electrical apparatus
for explosive gas atmospheres – Classification
of hazardous areas’ substitute "AS/NZS
60079.10.1 Explosive atmospheres -
Classification of areas - Explosive gas
atmospheres*’.
3) At the bottom of the Table insert the
following footnote:
* The AS/NZS 2430 series is now obsolete and replaced within the AS/NZS 60079 series; –in particular: AS/NZS 60079.10.1 Explosive atmospheres - Classification of areas - Explosive gas atmospheres
27
1.2.4
Outdated
reference 1) In the Note, for ‘DoTaRS’ substitute ‘DIT’.
2) For ‘Department of Transport and Regional
Services: www.dotars.gov.au’ substitute
‘Department of Infrastructure and Transport:
www.infrastructure.gov.au’.
Updated to reflect
changes to Department
27 1.2.4.1 - N.S.W. Outdated
details 1)‘State Coordinator, Compliance
Coordination Team’‘State Coordinator
Dangerous Goods’
2)‘02 4321 5191’‘02 4321 5196’
3) ‘02 4325 4736’‘02 9287 5196’
4) ‘Manager, Dangerous
Goods’‘Manager, Chemicals Regulation’
5) ‘02 9995 5999’‘02 9995 5936’
6) ‘Department of Environment and Climate
Change NSW’‘Office of Environment and
Heritage NSW’
Updated as advised by
the relevant authorities
ADG7 Corrigendum 1
4
PART 1
Page Provision Error Correction Comment
28 1.2.4.1 - Qld Outdated
details
1) For the address details of the Director–
General substitute:
Director-General Department of Transport and Main Roads PO Box 673 (230 Brunswick Street) FORTITUDE VALLEY QLD 4006
Web: www.tmr.qld.gov.au
2) For the items relating to Rail Transport and
Road Transport (other than the phone numbers)
substitute:
Road Transport:
Road Safety & System Management
Email: [email protected]
Rail Transport:
Rail Safety Regulation
Email: [email protected]
3) Move the phone numbers for Road
Transport to opposite the Road Transport
details.
4) For the Rail Transport numbers:
‘07 3253 4225’‘07 3253 4986’
‘07 3253 4233’‘07 3253 4917’
Updated as advised by
the relevant authorities
28 1.2.4.1 - SA Outdated
details 1) ‘08 83030401’‘08 8226 4895’
2) ‘08 83030444’‘08 8226 4999’
3) After the Web address insert:
Email: [email protected]
Updated as advised by
the relevant authority
28 1.2.4.1 - Tasmania Outdated
details 1) ‘The Delegate of the Competent
Authority’‘Manager, Dangerous
Substances Unit’
2)‘03 6233 3420 (interstate
calls)’‘03 6233 7657 (outside Tasmania)’
Updated as advised by
the relevant authority
28 1.2.4.1 - Victoria Outdated
details 1)‘Level 18’Level 26’
2) For the Web address substitute:
Web: www.workcover.vic.gov.au
Email: [email protected]
Updated as advised by
the relevant authority
ADG7 Corrigendum 1
5
PART 1
Page Provision Error Correction Comment
28 1.2.4.1 - WA Outdated
details
1) For the address details of the Executive
Director substitute:
Chief Inspector
Dangerous Goods Safety Branch
Department of Mines and Petroleum
100 Plain Street
EAST PERTH WA 6004
Web:
www.dmp.wa.gov.au/ResourcesSafety
Email: [email protected]
2) ‘08 9358 8002’‘08 9358 8001’
3) ‘08 9358 8188’‘08 9358 8000’
Updated as advised by
the relevant authority
PART 2
Page Provision Error Correction Comment
33 Introductory
Notes
Most of Note 1 no
longer valid
For the text of Note 1 substitute:
This Part reproduces Part 2 of the 15th
revised edition of the UN Model Regulations, except where indicated by the word ―<Reserved>‖ indicating a clause that has been omitted.
(c) was true only for
draft version of Code.
Markers no longer
included in this
version
34 2.0.1.1
Class 4
Div. 4.1
Spelling ‘desensitised’‘desensitized’ For consistency with
usage elsewhere in the
Code
37 2.0.3.1(c)
43 2.1.2 Duplication Omit the 2nd
version of sections 2.1.2 and
2.1.2.1
57 2.3.1.2
Note
Text formatting ‘…The’‘The’
71 2.4.2.4.1 UN Number
wrapping ‘,UN337 6’ ‘, UN3376’
71 2.4.2.4.2 Spelling ‘desensitised’‘desensitized’ As above
72 2.4.3.2.3.1 Note numbered ‘NOTE 1’‘NOTE’
78 2.5.3.2.1(b)
Note
Text wrapping In the definition of ni move ‘peroxide i’ to the
end of the immediately preceding line
85 2.5.3.2.4
Note 27
Invalid text Omit ‘Available active oxygen 7.6% in
diluent Type A having a 95% boil-off point in
the range of 200 - 260 °C. Not subject to the
requirements of this Code for Division 5.2. ’.
The contents of notes
28 and 29 were
incorrectly inserted
into note 27.
ADG7 Corrigendum 1
6
PART 2
Page Provision Error Correction Comment
92 2.6.2.2.4.1
Table
Invalid ―-‖ signs
preceding ―<‖ Omit ‘-’in the 6 places where it appears
before ‘<’
94 2.6.2.2.4.7(b) Subscript and
Superscript
missing
‘Pi’‘Pi’
‘ith’‘ith’
94 2.6.2.2.4.7(d) Formatting Remove italics from the Packing Group
entries
For consistency.
Elsewhere italics only
used where term is
being defined.
100 2.6.3.2.6 Incorrect clause
number ‘2.6.3.2.6’‘2.6.3.2.3.7’
101 6.6.6.6 Incorrect clause
number ‘6.6.6.6’‘2.6.3.6’
129 2.9.2.2 Missing text After ‘when they are’ insert:
(a) licensed by the Office of the Gene Technology Regulator (OGTR); or
(b) approved by Food Standards Australia New Zealand (FSANZ); or
(c) exempt from such licences and approvals under the Gene Technology Act 2000.
These paragraphs
were inadvertently
omitted from the
approved text during
the printing process.
134 Figure 2.9.1 Misalignment in
flow chart
Elevate each of the 6 short horizontal arrows
in the middle of the figure by 2 line spaces
PART 3
Page Provision Error Correction Comment
144 9.9.9.9 Incorrect clause
number ‘9.9.9.9’‘3.1.2.9’
162 3.2.3 DG List
UN 1210, Packing
Group I, column (6)
Incorrect footnote
reference for PGI ‘2’‘*’ Aligns with PGII and
PGIII entries
163 Footnote Footnote separated
from the entry to
which it applies on
the next page
Move the footnote to the bottom of
page 164.
164 3.2.3 DG List
UN 1263, Packing
Group I, column (6)
Incorrect footnote
reference for PGI
‘3’‘*’
Aligns with PGII and
PGIII entries
ADG7 Corrigendum 1
7
PART 3
Page Provision Error Correction Comment
173 3.2.3 DG List
UN 1600, column (8)
Invalid entry in
column (8) ‘0’‘None’ This and similar entries
do not require a Packing
Instruction
181 3.2.3 DG List
UN 1866, Packing
Group I, column (6)
Incorrect footnote
reference for PGI ‘4’‘*’ Aligns with PGII and
PGIII entries
188 3.2.3 DG List
UN 2215, MALEIC
ANHYDRIDE,
MOLTEN, column
(8)
Invalid entry in
column (8) ‘0’‘None’ As above
190 3.2.3 DG List
UN 2304, column (8)
Invalid entries in
column (8) ‘0’‘None’ As above
191 3.2.3 DG List
UN 2312, column (8)
Invalid entries in
column (8) ‘0’‘None’ As above
194 3.2.3 DG List
UN 2426, column (8)
Invalid entry in
column (8) ‘0’‘None’ As above
195 3.2.3 DG List
UN 2447, column (8)
Invalid entry in
column (8) ‘0’‘None’ As above
198 3.2.3 DG List
UN 2576, column (8)
Invalid entry in
column (8) ‘0’‘None’ As above
219 3.2.3 DG List
UN 3166, column
(8); UN 3171,
column (8)
Invalid entries in
column (8) ‘0’‘None’ As above
222 3.2.3 DG List
UN 3250, column (8)
Invalid entry in
column (8) ‘0’‘None’ As above
225 3.2.3 DG List
Footnote
Missing word in
footnote After ‘Use’ insert ‘of’
226 3.2.3 DG List
UN 3314
Entries in incorrect
column Move the entries ‘PP14’, ‘B3’, and
‘B6’ from column (10) to
column (9)
228 3.2.3 DG List
UN 3359, column (8)
Invalid entry in
column (8) ‘0’‘None’ As above
236 3.2.4.2
‗ACETIC A‘
UN 2790
Missing text from
name and
description
‘ACETIC A’‘ACETIC ACID
SOLUTION, more than 10% but
not more than 80% acid, by mass’
242 3.2.4.2
CARTRIDGESFOR
WEAPONS, INERT
PROJECTILE
Incomplete UN
Number for
1.4C entry
‘339’‘0339’
247 3.2.4.2
ETHANOL AND
GASOLINE
MIXTURE…
Incorrect UN Number ‘UN 3375’‘UN 3475’ Drafting transcription
error
ADG7 Corrigendum 1
8
PART 3
Page Provision Error Correction Comment
249 3.2.4.2
FUEL CELL…
Incorrect alignment For this item substitute:
FUEL CELL CARTRIDGES or FUEL CELL
CARTRIDGES CONTAINED IN EQUIPMENT
or FUEL CELL CARTRIDGES PACKED WITH
EQUIPMENT,
–containing corrosive substances 8 3477 –containing flammable liquids 3 3473 –containing hydrogen in metal hydride 2.1 3479 –containing liquefied flammable gas 2.1 3478 –containing water-reactive substances 4.3 3476
250 3.2.4.2
HEXAGON
Incorrect name ‘HEXAGON’‘HEXOGEN’
256 3.2.4.2
NITROSTARCH
UN 0146
Incorrect case in
classification Code ‘1.1d’‘1.1D’
268 Table 3.1, under the
item relating to UN
No. 3475
Incorrect footnote
reference ‘—a’‘—
*’
291 3.3.2
SP 284
Incomplete word in
(b) ‘wi hout’‘without’
296 3.3.2
SP 331
Incorrect cross
reference ‘5.2.1.7’‘5.2.1.6’
298 3.3.3
SP AU01
Exemption unclear
due to broad
definition of
‗packaging‘
For paragraphs (a), (b) and (c)
substitute:
(a) packagings that do not incorporate a receptacle exceeding 500 kg(L); or
(b) IBCs.
Ensures (as intended)
that except when
transported in IBCs,
UN 3077 and 3082 are
subject to the Code
when in any other large
receptacle
298 3.3.3
SP AU02
Punctuation ‘purposes..’‘purposes.’
PART 4
Page Provision Error Correction Comment
305 4.1.1 Note Text formatting ‘…where’‘where’
308 4.1.1.10
Note 3
Note 3 separated
from table to which it
applies
Move Note 3 from the top of page 308 to the bottom of
page 307
311 4.1.3.6.1
last
sentence
Incorrect non-
capitalisation ‘table 3’‘Table 3’
ADG7 Corrigendum 1
9
PART 4
Page Provision Error Correction Comment
318 4.1.4.1
P010,
Column 3
Incorrect sub-
heading;
Missing capacities
1)‘Maximum net mass’ (where secondly occurring)
‘Maximum capacity’
2) Under 450 L insert:
60 L
250 L
334 4.1.4.1
P200
Incorrect formula for
first filling ratio in
(3)(b)
‘8.5 H10-4
H dg H Ph’‘8.5 10-4 dg Ph’
335 4.1.4.1
P200
Incorrect formula for
filling ratio in 3(c).
Subscript missing
from key
1) ‘(0.0032 x BP–0.24) H d1’‘(0.0032 BP–0.24) d1’
2) ‘d1’‘d1’
335
336
4.1.4.1
P200
Misalignment and
incorrect font of sub-
headings; missing
superscript
In (4):
(a) italicise ‘Material compatibility (for gases see ISO
11114-1:1997 and ISO 11114-2:2000)’;
(b) for ‘200ml/m3’ substitute ‘200 ml/m3’;
(c) italicize the following subheadings and bring them
into the same alignment as the heading referred to in
paragraph (a) above:
- ‘Requirements for toxic substances with an LC50 less
than or equal to 200 ml/m3 (ppm)’ [located before
paragraph (k)]
- ‘Gas specific provisions’ [located before
paragraph (l)];
(d) italicize the following subheadings:
- ‘Periodic inspection’ [located before paragraph (u)]
- ‘Requirements for N.O.S. descriptions and for
mixtures’ [located before paragraph (z)].
346 4.1.4.1
P401
Heading misplaced
and internal lines
missing from tables
For the table without lines in the right bottom corner of
this instruction substitute:
Maximum capacity/Net mass (see 4.1.3.3)
Inner packaging Outer packaging
1 L 30kg
Table was
correct to
UN14
346 4.1.4.1
P402
Heading misplaced
and internal lines
missing from tables
For the table without lines approximately half way down
the right hand side of this instruction substitute:
Maximum net mass
Inner packaging Outer packaging
10 kg (glass) 125kg
15 kg (metal or plastics) 125kg
Table was
correct to
UN14
ADG7 Corrigendum 1
10
PART 4
Page Provision Error Correction Comment
373 4.1.4.2
IBC520
Missing Packing
Instruction numbers In the 1
st cell of the Table, insert ‘IBC520’once as far as
possible to the left of ‘PACKING INSTRUCTION
(cont'd)’, and once as far as possible to the left of that
expression.
396 4.2.5.2.5
T23
Missing continuity
statement At the bottom of the page insert ‘Continued next page’
398 4.2.5.2.6
T50
Bracket misaligned In the entry relating to UN No. 1118, move the bracket
after ‘Chlorodifluoromethane’ to the next line and place
it immediately before ‘Refrigerant’.
Missing UN Number In column 1 of the entry relating to
Dichlorofluoromethane, insert ‘1029’.
Missing continuity
statement At the bottom of the page insert ‘Continued next page’
399 4.2.5.2.6
T50
Missing UN Number In column 1 of the entry relating to Petroleum gas,
liquefied insert ‘1075’.
400 4.2.5.2.6
T50
Missing UN Number In column 1 of the entry relating toHydrocarbon gas,
mixture liquefied, n.o.s. insert ‘1965’.
401 4.2.5.2.6
T50
Missing UN Number In column 1 of the entry relating toTrifluoroacetyl
chloride insert ‘3057’.
PART 5
Page Provision Error Correction Comment
416 5.1.2.4 Sub-clauses
incorrectly
numbered
1) ‘5.1.2.4.2’‘5.1.2.4.1’
2) ‘5.1.2.4.3’‘5.1.2.4.2’
3) ‘5.1.2.4.4’‘5.1.2.4.3’
4) ‘5.1.2.4.5’‘5.1.2.4.4’
417 5.2.1.1 Letters ‗UN‘
missing
from example
‘N 3265’‘UN 3265’
422 5.2.2.2.1.1 Text formatting ‘…must’‘must’
432 5.3.1.3.4 NOTE missing At the end of this clause insert:
NOTE: The transport of unodourized LP Gas
is subject to Special Provision AU03 in
Chapter 3.3.
436 Figure
5.3.2(c)
Heading missing At the top of the page insert:
Figure 5.3.2(c) Examples of Completed
Emergency Information Panels
ADG7 Corrigendum 1
11
PART 5
Page Provision Error Correction Comment
438 Figure
5.3.4
Top of the
thermometer not
shown clearly
For the figure substitute:
Figure 5.3.4 Mark for carriage at elevated temperature
438 5.3.2.3.1 Odd marker Omit‘ ▫’ where it appears after ‘(Figure 5.2.2).’
440 5.3.5
Note 2
Note text not
italicised
Italicise paragraphs (a) & (b)
440,
441
5.3.5.2 Sub-clauses
incorrectly
numbered
1) Clause 5.3.5.2.2: ‘5.3.5.2.2’‘5.3.5.2.1’
2) Clause 5.3.5.2.3: ‘5.3.5.2.3’‘5.3.5.2.2’
3) Clause 5.3.5.2.4: ‘5.3.5.2.4’‘5.3.5.2.3’
4) Clause 5.3.5.2.5:
(a) ‘5.3.5.2.5’‘5.3.5.2.4’
(b) ‘5.3.5.2.2’‘5.3.5.2.1’
(c) ‘5.3.5.2.3’‘5.3.5.2.2’
(d) ‘5.3.5.2.4’‘5.3.5.2.3’
445 5.3.9.3 Missing text in
Note After ‘transport’ insert ‘units.’
ADG7 Corrigendum 1
12
PART 6
Page Provision Error Correction Comment
457 6.1.1.1 Incorrect alignment of
provisions
1) In paragraph (a):
(a) indent the ‘(a)’ so that it aligns with its
equivalents in paragraphs (b) – (d);
(b) indent the text of the preamble of the
paragraph so that it aligns with the
equivalent text in paragraphs (b) – (d).
2) In paragraph (a)(i):
(a) indent the ‘(i)’ so that it aligns with its
equivalent in subparagraph (ii);
(b) indent the text of the subparagraph so that
it aligns with the equivalent text in
subparagraph (ii).
476 6.1.5.1.12,
heading
Incorrect UN
reference ‘6.1.5.7’‘6.1.5.1.7’
479 6.1.5.3.4 Punctuation Omit the full stop after the 1st colon.
482 1.5.7 Incorrect numbering ‘1.5.7’‘6.1.5.7’
499 6.2.2.7.2(h) Case of unit ‘mm’‘MM’ Even though the
SI unit is in lower
case, upper case is
required here for
consistency with
other markings
516 6.5.2.1 Incorrect sub-clause
number ‘1.1.1.1.1’‘6.5.2.1.1’
524 6.5.5.4.2 Typographical ‘‖rigid’‘―rigid’
529 6.5.6.3.5 Various alignment
issues
See bottom of this table on page 13.
529 6.5.6.3.5 Incorrect reference to
note e in the column
headed "Drop", in the
2nd
reference to "7th e"
(the item relating to
31HI, 31H2 in rigid
plastics)
‘7th e’‘7th’ This change is
incorporated in
the revised table
on page 13
530 6.5.6.6.3 Incorrect cross
reference ‘6.5.4.6.4’‘6.5.6.6.4’
542 6.6.5.1.6, Note Format Italicise the note. For consistency
547 6.7.2.1Definition
of Design
pressure ,
paragraph (c)
Text incomplete After ‘portable tank’ insert ‘instruction in
4.2.5.2.6;’.
ADG7 Corrigendum 1
13
PART 6
Page Provision Error Correction Comment
548 6.7.2.1Definition
of Design
temperature range
Text incomplete After ‘ambient’ insert ‘conditions. For the
other substances handled under elevated
temperature conditions the design temperature
must be not less than the maximum
temperature of the substance during filling,
discharge or transport. More severe design
temperatures must be considered for portable
tanks subjected to severe climatic conditions;’.
564 6.7.2.20.1, 2nd
last
line
Incorrect footnote
reference ‘gauge
2’ ‘gauge*’
566 6.7.3.2, heading Misalignment Move the heading so that it starts in the left-
most margin of the page.
599 6.8.4.6 Incorrect sub-clause
number
‗6.8.6.4.1‘ ‗6.8.4.6.1‘
Additional Part 6 change
On page 529, for 6.5.6.3.5 substitute:
6.5.6.3.5 Design type tests required and sequential order
Type of IBC Vibration
f Bottom
lift Top lift a
Stacking
b Leak-
proofness Hydraulic pressure
Drop Tear Topple Righting
c
Metal: 11A, 11B, 11N 1st
a 2nd 3rd - - 4th
e - - -
21A, 21B, 21N 1st a 2nd 3rd 4th 5th 6th
e - - -
31A, 31B, 31N 1st 2nd a 3rd 4th 5th 6th 7th
e
Flexible d - x
c x - - x x x x
Rigid plastics: 11H1, 11H2 1st
a 2nd 3rd - - 4th - - -
21H1, 21H2 1st a 2nd 3rd 4th 5th 6th - - -
31H1, 31H2 1st 2nd a 3rd 4th 5th 6th 7th
Composite: 11HZ1, 11HZ2 1st
a 2nd 3rd - - 4th
e - - -
21HZ1, 21HZ2 1st a 2nd 3rd 4th 5th 6th
e - - -
31HZ1, 31HZ2 1st 2nd a 3rd 4th 5th 6th 7th
e
Fibreboard 1st - 2nd - - 3rd - - -
Wooden 1st - 2nd - - 3rd - - -
a When IBCs are designed for this method of handling.
b When IBCs are designed to be stacked.
c When IBCs are designated to be lifted from the top or the side.
d Required test indicated by x; an IBC which has passed one test may be used for other tests, in
any order. e Another IBC of the same design may be used for the drop test.
f Another IBC of the same design may be used for the vibration test.
ADG7 Corrigendum 1
14
PART 7
Page Provision Error Correction Comment
611 7.1 Chapter heading missing At the top of the page insert ‘CHAPTER 7.1 —
TRANSPORT PROVISIONS*’.
611 Footnote ** Departure from defined
term ‘Material Safety Data Sheets’ ‘Safety Data
Sheets’
PART 9
Page Provision Error Correction Comment
630 Table 9.1 Incorrect exception
reference
In the cell where class 6 of the
vertical list intersects with
class 3 of the horizontal list, for
‘0(5)’ substitute ‘0(6)’
635 Table 9.3 Misalignment of text in
header row
1) In the 2nd
cell of the 1st row
of the table, move "Goods A"
to the left side of the cell.
2) In the 3rd
cell of the 1st row
of the table, move "Goods B"
to the left side of the cell.
636 9.2.4.1 Incorrect punctuation At the end of the provision,
omit ‘ ‖ ’
636 Missing number After clause 9.2.4.3 insert:
9.2.4.4 <Reserved>
The reservation of the number
avoids the need to renumber the
following clauses
PART 10
Page Provision Error Correction Comment
639 Part 10 Missing ‗0‘ in Part
heading ‘1’‘10’
646 10.2.2.1 Obsolete standard ‘AS/NZS 60079.10’‘AS/NZS 60079.10.1’ Replaced by reference
to current Standard
646 Footnote Update of
information Before "These Standards" insert:
AS/NZS 60079.10.1 is an internationally
based Standard that has now replaced the
AS/NZS 2430 series of Standards.
ADG7 Corrigendum 1
15
PART 11
Page Provision Error Correction Comment
654 11.1.2.2.1(f) Lack of
prominence of
sample text
Bold all expressions in subparagraphs (i) and
(ii) that are enclosed by quotation marks.
654 11.1.2.2.2,
Note 1
Misalignment of
example
For the example substitute:
―UN1098 ALLYL ALCOHOL 6.1 (3) I‖; or
―UN1098, ALLYL ALCOHOL, Division 6.1, (Class 3), PG I‖.
656 11.1.3.1.1 Clause number
incorrectly aligned Move ‘11.1.3.1.1’ to the left so that it aligns
with the other clause numbers on the page.
656 11.1.3.1.1,
Note
Lack of
prominence of
sample text
Bold all expressions in paragraphs (b) and (c)
that are enclosed by quotation marks.
656 11.1.3.1.2 Misalignment and
lack of
prominence of
sample text
For the example substitute:
“EMPTY D/G DRUMS‖; or ―D/G RESIDUE‖ or
―RETURN EMPTY D/G PACKAGES‖
657 11.1.3.6 Misalignment and
lack of
prominence of
sample text
For everything after ‘as follows:’ substitute:
"Transport in accordance with 4.1.2.2(b)",
"Transport in accordance with 6.7.2.19.6(b)",
"Transport in accordance with 6.7.3.15.6(b)" or
"Transport in accordance with 6.7.4.14.6(b)" as appropriate.
PART 12
Page Provision Error Correction Comment
664 Table 12.1 Possibly ambiguous
symbol ‘+’ (where it appears before
‘One x 20B’) ‘&’
To minimise possible
misinterpretation
665 Table 12.2,
paragraph (c)
Definition incorrectly
buried in other text Move the definition of ‘gas tight
goggles’ 1 line lower
APPENDIX B
Page Paragraph Error Correction Comment
682,
684,
686
Header Incorrect Appendix No. ‘APPENDIX C’‘APPENDIX B’
ADG7 Corrigendum 1
16
APPENDIX D
Page Provision Error Correction Comment
707 D7 Licensing no longer
supported
‗dotars‘ website no
longer valid
For the 2nd
sentence (that is, the sentence
starting ‘A list of’ and ending ‘aspx’) substitute:
NOTE: Details of approved drum reprocessors can be obtained from the Competent Authority.
707 D7(a)(iii)
2nd
dash
point
Incorrect cross
reference Omit ‘D4 of’
709 Table D,
column 1
Missing internal
headings 1) In the cell above ‘Approved drums’
insert the heading ‘CRITERIA BASED
ON ORIGINAL (AS NEW) STATUS’.
2) In the cell below ‘Unapproved drums’
insert the heading ‘WEIGHT
CRITERION’.
3) In the cell below
‘Nominally < 15.5kg’ insert the
heading ‘DAMAGE CRITERIA’.
INDEX OF DEFINED TERMS etc.
Page Provision Error Correction Comment
715 List Changed Department
Name
Department of Transport and Regional
Services Department of Infrastructure
and Transport
INFORMATION GUIDE
Page Provision Error Correction Comment
G13 8 Word spacing 1) In the 1st bullet point,
‘Bulkcontainers’‘Bulk containers’.
2) In the 3rd
bullet point,
‘Theyexclude’‘They exclude’.
3) In the 4th bullet point,
‘Theyinclude’‘They include’.