Organised by

Corporate Monitor

&

Jawaharlal Nehru Aluminium Research Design & Development Centre

:In Association with:

Indian Primary Copper Producers’ Association

Ministry of Mines, Government of India

Hotel Shangri-La’s Eros, New Delhi July 7-8,2017

2 | P a g e

DAY-1: 7th July 2017

Registrations : 8 45 a.m. onwards

Inaugural Session at 10 a.m.

Opening remarks

Lighting of the lamp & presentation of flower bouquets

Welcome Address: Dr. K Muraleedharan,

Chairman , Organising Committee & Director, CSIR-CGCRI

Address by Dr. Anupam Agnihotri, Director, JNARDDC

Address by Guest of Honour: Shri Atul Bhatt, CMD, MECON

Address by Guest of Honour: Shri Abhijit Pati,CEO-Aluminium,

Vedanta, Jharsuguda

Address by Guest of Honour: Shri Satish Pai, MD, HINDALCO

Address by Guest of Honour, Shri K D Diwan, CMD, Hindustan Copper

Address by Guest of Honour, Dr. T K Chand, CMD, NALCO

Address by Chief Guest : Shri Arun Kumar,IAS,

Secretary, Ministry of Mines followed by his felicitations

Felicitations : Shri K D Diwan – Lifetime Achievement award

Felicitations: Dr. T K Chand – Corporate Governance award

Felicitations : Shri Satish Pai – Corporate Excellence award

Felicitations: Dr B K Satpathy- Scientific Excellence award

Felicitations: Dr. A K Mukhopadhyay- Technological Excellence award

Felicitations : CSIR-NML : Scientific Institutional Excellence award

Presentation of Mementos & Vote of thanks: Dr Vinod K Verma,

Co-Chairman, Conference Organising Committee

Inaugural tea at 11:40 a.m.: sponsored by Himadri Speciality Chemicals

3 | P a g e

Theme Session at 12:10 p.m.

Address by Sri Subhas Chandra, IFS , Jt Secretary, Ministry of Mines,

Government of India

Potential for Aluminium Industry in India : Sri Satish Pai, MD, Hindalco

Industries Ltd

CEO Panel on Primary Copper Production at 1:00 p.m.

Sponsored by Indian Primary Copper Producers’ Association

Chair: Sri Subhas Chandra,IFS, Jt Secretary,MOM

Panelists

K D Diwan- CMD, Hindustan Copper

P Ramnath – CEO- Sterlite Copper

J C Laddha – CEO- Hindalco-Copper Division

Lunch at 1 50 pm

International Paper Session at 2 40 p.m.

Production and performance of slotted anodes : Giovanni Campice,

Tomorrow Technology

Innovations in production processes of high performance alloys: Helgar

Bergmann, Almex USA Inc

Presentation by Outotec

Complete in-line degassing solutions for continuous casting : Francois

Mousseau, STAS Inc

Total Dross Management: Mark Bumford, ALTEK(Europe) Ltd

Evaluation of Efficient Preheating system for CFF Boxes and Launders in

Aluminium cast house : Frank Reausch & Nicklas Kaecker, Drache

4 | P a g e

From Copper raw material down to 2 mm copper wire: Carmelo Maria

Brocato, Continuus Properzi S.p.A

Tea/coffee break

Sponsored Paper Session starts at 5:00 pm

Presentation by Hunan Kori Converters , China

Innovative Rotary Hearth Furnace for Treating Non-Ferrous Metallurgical

Waste to Recover Valuable Metal & By-Products Based on Zero Waste

Discharge Approach:Bikash Sahoo. SHENWU TECHNOLOGY GROUP, China

DMS Silicone Carbide heating elements for melting non-ferrous metals: A

presentation by DMS heating elements, Bangalore

Programme concludes at 6 pm

Delegates will be escorted to Constituent Club at Rafi Marg at 6 30 pm

(Evening Programme sponsored by Hindalco Industries Ltd)

Cultural Programme at 7 pm

Cocktails and Dinner 730 pm onwards

End of Day-1 at 10 pm

5 | P a g e

DAY-2: 8th July 2017

Technical Session-1: 9 45 a.m. Main Hall

Keynote: Industrial Scale Development and Production of Aluminium Alloys for Critical Defence applications : A K Mukhopadhyay , DMRL, Hyderabad

Keynote: Tailings of Jezkazgan Copper Sandstone Deposit- source to replenish the mineral resources of non-ferrous metals: A Baibatsha, Kazakh National Research Technical University, republic of Kazakhstan

Use of High Sulphur Coke at Hindalco Renukoot Carbon Plant: Mukul Modak Detoxification of SPL by destroying leachable cyanide : Manoj T Nimje, JNARDDC,

Nagpur Systematic Approach for the usage of high Vanadium CP Coke for anode production :

Vivek Saxena, Vedanta, Jharsuguda

Morning refreshments at 11 20 a.m.

Technical Session-2 : Main Hall from 11:45 a.m.

Utilisation of waste aluminium dross as refractory material: Upendra Singh,

JNARDDC, Nagpur A Novel method for recovery of Soda from Bauxite residue and utilization of the

residue in more efficient way: Sagar S Pandit, Hindalco Innovation centre-Alumina Usage of low density Alf3 at Hindalco Mahan – cost saving by using an alternate raw

material : K K Pandey, Hindalco, Mahan Development of Aluminium Rod for Higher Productivity RBD: Rashmi Sahoo,

Vedanta, Jharsuguda Macro-modelling of Aluminium Smelting Process : Shanmukh Rajgire, ABSTC, Taloja Development of 3xxx billet for Micro Tube Exchanger Application: Ramya Datrika,

Vedanta, Jharsuguda Instrument for onsite measurement of liquidus and operating temperature of

aluminium electrolysis bath: Dr. A Agnihotri, JNARDDC, Nagpur

Technical Session-3 (Parallel): Hall Tapti from 11:45 a.m.

Impact of Collective Bar Design on Aluminium reduction cell performance : Bhavya Narang, ABSTC, Taloja

6 | P a g e

Designing process flow sheet for Beneficiation of a finely disseminate low grade Copper Ore: Rajendra Kumar Rath, MPD, CSIR—NML, Jamshedpur

A Process for development of refractory aggregates from saprolite: Pravin Bhukte, JNARDDC, Nagpur

Extraction of rare earths from end of the Compact Flurorescent Lamps (CFLs) and Flurorescent Lamps(FLs) : U Rambabu, C-MET, Hyderabad

Inducement of rapid analysis for determination of available alumina and reactive silica in Bauxite: P A Mohammed Najar, JNARDDC, Nagpur

Processing of coal fly ash for the recovery of alumina and other value added products: Kali Sanjay, CSIR-IMMT, Bhubaneswar

Significance of Distillation on Extraction and Purification of strategic metals: Krishna Kumar, ME & R Division, CSIR-NML, Jamshedpur

Lunch at 2 pm

Technical Session-4 (from 2 40 pm)

Failure Analysis of Coreless Induction Furnace Refractory lining, used for Iron

melting in Anode Roding shop of an integrated Aluminium Smelter and their

remedial procedure : S Padhi & R N Nandy, Smelter Plant, NALCO, Angul

Effect of Thiocyanate and acid concentrations on the separation of hafnium and zirconium : Arbind Kumar, C-MET, Hyderabad

Investigation of Structural Integrity of Pond Ash/High Carbon Ferrochrome Slag

based Geopolymer : M K Panigrahi, GIET,Gunupur

Effect of Multi-Pass, zone length and translation rate on impurity segregation during

zone refining of Cadmium: D S Prasad, C-MET, Hyderabad

Recycling of waste printed circuit boards by delamination using different organic

solvents and study of its mechanism : Himanshu Ranjan Verma, IIT(BHU), Varanasi

Valedictory Session at 4 00 pm

Programme concludes with afternoon refreshments at 4 45 pm