35
1. Open Corel DRAW. 2. Draw the rectangle with Rectangle Tool to create the cloud effect. Remove outline. 3. Select Interactive Fill Tool. Drag from Top to Bottom. 4. Fill Black, Red And Yellow color from top to bottom and adjust the proportion properly. 5. Select the rectangle. Drag it down with Top Center point to get the mirror image of the original. Without leaving left button, click right mouse button to get the copy of the mirror image which will be used as a lake. 6. Draw mountains with Bazier Tool and fill it with black color. 7. Follow the step 5 to get the mirror image of the mountains

corel draw tutorial

Embed Size (px)

Citation preview

Page 1: corel draw tutorial

1. Open Corel DRAW.

2. Draw the rectangle with Rectangle Tool to create the cloud effect. Remove outline.

3. Select Interactive Fill Tool. Drag from Top to Bottom.

4. Fill Black, Red And Yellow color from top to bottom and adjust the proportion properly.

5. Select the rectangle. Drag it down with Top Center point to get the mirror image of the original. Without leaving left button, click right mouse button to get the copy of the mirror image which will be used as a lake.

6. Draw mountains with Bazier Tool and fill it with black color.

7. Follow the step 5 to get the mirror image of the mountains

Page 2: corel draw tutorial

8. Send the mountains behind the lake.

9. Select lake. Select Interactive Transparency Tool. Drag over the lake. You will get the reflection of the mountains.

10. You will get the reflection of the mountains.

11. Draw Land with Bazier Tool

12. Draw Coconut tree with Bazier Tool.

Page 3: corel draw tutorial

13. Group the branches and copy them to create two more trees.

14. The output will look like this.

15. Draw the Boat with Bazier tool and group it. Make the reflection of it using previous mountain steps and send the reflection behind the Lake.

16. The output will look like this.

Page 4: corel draw tutorial

17. Create Circle with Ellipse Tool fill it with Interactive fill tool using Radial Fountain Fill. This will make Sun. Use the combination of red and yellow color.

18. Send the Sun behind mountains.

19. Duplicate and get the copy of sun. Stretch it horizontally and make it thin vertically.

20. Keep on duplicating and place it one below other.

21. Make the size of the copy small as you go downwards.

22. This will create the reflection of the Sun in the lake.

Page 5: corel draw tutorial

1. Create the shape for button.

2. Select Interactive Fill Tool from toolbox and drag the cursor from top left to bottom right corner. Change the colors from the property bar.

3. Select Pick Tool.

Select the shape.

Press Shift and drag the shape little inside from any corner point. Without releasing left mouse button click right mouse button.

You will get the offset copy of the original shape exactly at the center.

4. Select the second copy which is inside.

5. Select Interactive Fill Tool

6. Turn the mark of the tool (dotted line with small black & white rectangles) in opposite direction. It should look as if it is dragged from Bottom right to upper left corner.

7. Double click the pick tool so that both the shapes will get selected simultaneously.

8. Right click on the cross mark at the top of the color palette. The out line will disappear.

9. Create the following buttons with similar method.

Page 6: corel draw tutorial

1. Open Corel DRAW and select Polygon Tool. Draw the polygon with 7 sides. Use property bar to fix the sides.

2. Select Interactive Extrude Tool and create extrude. Drag the guide lines and place them as shown below.

3. Select Bazier Tool and create triangles from the sides of the stone to the intersection point of the guidelines.

4. Select Interactive Fill Tool. Select any triangle and drag the tool over the triangle.

Select Linear Fountain Fill from property bar and select the colors of your choice.

Page 7: corel draw tutorial

5. Copy the same fill in all the triangles by following method.

Right click and drag the filled triangle to the unfilled one. When they will get overlapped the cursor will turn into cross mark with circle. Release mouse button. Click 'Copy Fill Here'.

6. Select the extrude (back portion)

Arrange > Separate

Fill the small rectangles by the same method.

Change the directions of the two colors by moving and dragging Interactive Fill Pointer.

Page 8: corel draw tutorial

1. Open Corel DRAW. Select Graph Paper Tool from Tool Box. Add the number of rows and column using Property Bar. Input the same values for rows and cols.

2. Press CTRL and draw square shaped graph paper. Fill with white color. Keep it selected.

3. Arrange > Ungroup All

4. Press Shift and select alternate square with Pick Tool. Fill with black color.

5. Select the drawing by dragging Pick Tool around it. Arrange > Group

6. Effects > Add Perspective

7. Drag four points with cursor and create a perspective.

7. Add shadow with duplicate. Check out Shadow Project for making shadows.

Page 9: corel draw tutorial

1. Open Corel DRAW. Select Graph Paper Tool from Tool Box. Add the number of rows and column using Property Bar. Input the same values for rows and cols.

2. Press CTRL and draw square shaped graph paper.

3. Select Ellipse Tool and draw perfect circle by pressing CTRL.

4. Place the circle above the graph paper in the middle. Select the circle.

5. Effects > Lens

Select Fish Eye from drop down menu. Check Frozen. Click Apply.

6. Select the graph paper and delete it.

Select the ball.

Arrange > Ungroup

Page 10: corel draw tutorial

Select the outside circle and delete.

7. Select any portion of the ball and keep on pressing Tab till one more circle behind the ball get selected. Delete that circle also.

8. Select the ball and fill the color.

9. Move the parts of the ball to create Explode effect.

1. Open Corel DRAW. Draw Rectangle with Rectangle Tool.Note: It is expected that you have finished with the beginners and intermediate projects when you start with advance, as we do not repeat the small instructions.

2. Select the middle left point of the rectangle with pick tool. Drag it to the right and right click to get the copy of small rectangle.

Page 11: corel draw tutorial

3. Double click small rectangle and skew it upwards by dragging it's right middle point.

4. Make a duplicate of right skewed rectangle and place it at the left corner of the main big rectangle.

5. Make a duplicate of the main big rectangle and place it at the back to

Page 12: corel draw tutorial

complete four sides of the tank.

6. Using Bazier Tool, create the rectangle little below the top of the tank to form the upper surface of water.

7. Select the rectangle of water surface. Apply texture fill. You can change the color of the texture.

Texture Library > Sample 5 Texture list > Hub Cap

8. Create the bottom of the tank similarly and apply texture fill.Choose the texture of your choice.

9. Create the front and the left side surface of the water. Using Interactive Transparency Tool make these surface semitransparent.

Page 13: corel draw tutorial

10. To make the tank more realistic, change the border color to green by right clicking on the green color. Use symbols to fill the objects in the tank. Send the objects back to the water surface using Arrange > Order

. Open Corel DRAW. Draw perfect circle with the help of Ellipse Tool and CTRL key.

2. With Shift and Drag method, make a copy of the circle inside the main circle and right click to get the copy.

3. Select both the circles

Arrange > Combine

Page 14: corel draw tutorial

4. Select Interactive Fill Tool. Drag the pointer on the object. Select Radial Fountain Fill from property bar.

5. With the proper combination of two colors create the ring effect. White is chosen as a mid color in the following ring.

6. How to entangle the rings? Make another copy of the ring. Place is over other.

7. Draw the shape which you want to remove to get entangled effect on the top cross section of the rings.

8. Select the newly drawn shape.

Arrange > Shaping > Trim

Page 15: corel draw tutorial

9. Click on the top circle to trim. Delete the shape after trimming.

1. Open Corel DRAW.

2. Window > Dockers > Symbols & Special Characters

3. Select the symbols you want to use for collage

4. Arrange the symbols in desired order.

5. Change the sizes if require.

6. Fill the colors

Page 16: corel draw tutorial

7. Select each symbol. Select Interactive Transparency Tool and drag over the symbol in different directions.

8. After applying Interactive Transparency Tool, symbols will be partially merged and you will get collage effect.

9. Deselect the collage

Page 17: corel draw tutorial

1. Open Corel DRAW. Draw the following shape using Bezier Tool. Take the help of Guidelines if require.

2. Draw another shape for curl, in the line with the edge of previous shape as shown below. Keep the shape selected.

3. Select Shape Tool. Drag around the second shape. Click "Convert Line to Curve" in the property bar. Edit right edge of the shape into curve using Shape Tool.

4. Add Fountain Fill using Interactive Fill Tool.

Page 18: corel draw tutorial

1. Open Corel DRAW and select Bazier Tool. If you are good with free hand drawing you can use Free hand Tool.

2. Draw the basic layout of the design. Close the design.

3. Select Shape tool and with the help of Node Edit edit the basic pattern according to your choice.

4. Fill the details with the help of Bazier or Free hand Tool.

Page 19: corel draw tutorial

5. Fill the desired color.

Page 20: corel draw tutorial

1. Open Corel DRAW.

2. Draw the out line of the basic shape using Bazier Tool.

3. Edit the basic shape using Shape Tool with Node Edit Options.

4. Create the offset shape inside the original shape using Interactive Contour Tool.

5. Fill it with Golden shade using Fountain Fill > Preset

6. Make different shapes according to requirement.

Page 21: corel draw tutorial

7. Use Shift + Pick Tool and Right click to get the smaller copies. You can try Interactive Contour Tool.

8. Try the combination of the shapes.

9. After filling the golden shade, change the direction of the fill by shifting the arrow using Interactive Fill Tool.

10. Place the shapes in a proper symmetry

Page 22: corel draw tutorial

1. Open Corel DRAW.

2. To create a pearl, draw the circle and fill it up with Radial Fill.

3. Draw the square and place the copies of the pearl at four sides. Take the square as guide.

4. Using Interactive Blend Tool, create the outline of the pendant.

5. Press shift and reduce the size of the pendant using pick tool. Right click to get the smaller copy inside. Create multiple smaller copies.

Page 23: corel draw tutorial

6. Rotate the pendant to 45 degrees. Draw the square inside and fill it up with Square Fill.

7. Draw the curved line of desired shape. Place two pearls at two ends. Blend them along the path.

8. First blend the pearls. Select the blend. Using Property Bar, Select Path Properties. Click on New Path and select the curve as path.

9. Keep the blend selected. In the Property Bar again, select Miscellaneous Blend Options. Check Blend along full path.

Page 24: corel draw tutorial

10. Make the copies of the pendants with different sizes.

11. Arrange other parts of the necklace according to following design.

1. Open Corel DRAW. Create some design you want to use for Two Color Pattern. Use black & White colors.

2. Tools > Create > Pattern

Create Pattern Dialog box will be displayed. Select Two Color. Click OK.

3. Cross cursor is displayed on the screen called Marquee. Drag it around the design as follows.

Page 25: corel draw tutorial

4. Click OK for the following dialog box.

5. Draw rectangle or any shape to fill the pattern. Keep it selected.

It is a simple test to check the pattern whether it is created properly or not.

6. Select Fill Tool and Pattern Fill Dialog. Select 2-Color

7. Click OK.

8. The Procedure is similar for full color pattern with little difference.

Page 26: corel draw tutorial

9. Create a design for full color pattern use any colors.

10. Follow the steps from 2 - 4

11. Full color pattern has to be saved in 'Pattern' folder of Corel DRAW.

The dialog box for saving the pattern will get displayed. Name the pattern and save it.

12. Follow the steps from 5 - 7

1. Open Corel DRAW. Select Bezier Tool and draw the following shape.

2. Select the Shape tool and select all three points by dragging shape tool around the shape

Page 27: corel draw tutorial

3. Click Convert Line To Curves from Property bar which is activated after selecting shape tool.

4. Select top left point using shape tool and click Make Node Symmetrical from Property bar. Edit the nodes using the available options and make the proper half portion of the heart shape.

5. Select Pick Tool.

Arrange > Transformations > Scale

Scale & Mirror > Mirror ( H for Horizontal )

Apply to Duplicate.

6. Position the other half carefully to make a proper shape.

Page 28: corel draw tutorial

7. Select both the shapes using Pick Tool.

Arrange > Combine

8. Using Shape Tool, select top open points by dragging the Shape Tool around the points.

9. Click Join Two Nodes from Property bar.

Page 29: corel draw tutorial

10. Repeat the procedure for bottom nodes which are not joined.

11. Fill the shape with desired color.

1. Open Corel DRAW. Draw a rectangle with Rectangle Tool

2. Select interactive Extrude Tool and Extrude the rectangle as shown below to make a rectangular plate.

3. Type the text and place it at the edge. Make a copy of the text and keep it aside.

4. Extrude the text with Interactive Extrude Tool.

Page 30: corel draw tutorial

5. Fill the black color in the copy of the text. And send it to the back of extrude one.

Arrange > Order > Back One

6. Skew & scale the text for shadow effect. Check out Skewing in Shadows project.

7. Select the Extrude text. Fill the color.

8. Go to Property Bar. Click Color flyout menu.

9. Click the third option "Use Color Shading. Select the colors for shading.

10. Use color shading for the rectangular plate also.

Page 31: corel draw tutorial

11. Type the text at the front side just to add the flavor.

1. Open Corel DRAW. Create a petal shape you want to use for making flower

2. Following shape is created by converting ellipse to curve by pressing Ctrl + Q and then edited with shape tool.

3. Double click the shape to get the points for rotation as follows

4. Drag the center of the shape at the bottom

5. Arrange > Transformation

Select Rotate tab

Page 32: corel draw tutorial

6. Input the value 12 for angle or some value which will divide 360.

7. Click Apply to Duplicate. Duplicate will be created at an angle of 12 degrees

8. Go on clicking till you get the following shape.

9. Double click on the pick tool to select all the petals and fill with desired color.

Page 33: corel draw tutorial

10. Arrange > Combine