Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
22Volt RANGE
36Volt RANGE
The technology behind Hilti batteriesHilti batteries are sealed against moisture and dust, and glass-fibre housing means these powerful batteries are up to four times more impact-resistant than standard plastic casings. We have come a long way from Nickel based batteries to lighter and cleaner Lithium technology. This shift has helped to reduce the weight of the batteries and the overall weight of cordless tools, but also allows us to store more energy in each cell. Because the Li-ion cells Hilti uses are electronically controlled, it’s improved the energy management inside the tool, preventing overload or deep discharge and giving you the ability to verify the level of charge with the handy LED-light indicators.
Battery afterlifeDisposal of used battery packs is a standard service offered by either manufacturers or local collection centres. Disposals should never happen through general waste, and should be prepared by discharging the battery, sealing the contents with tape and visibly writing lithium ion on the back.
Cordless Tools / 2
THE 18V BATTERY WITH OVER 200 PRODUCTS TO CHOOSE FROM
See our full range of cordless products: www.makitauk.com
EFFICIENT POWER MANAGEMENT
OVERLOAD PROTECTION
Allows battery and tool to communicate
protecting form overload.
DISCHARGE PROTECTIONExtends battery life by
stopping the tool before battery capacity is low.
OVER HEAT PROTECTIONMonitors battery temp
stopping the tool before battery is damaged.
ANYTIME CHARGE
LONG STORAGE
Monitors battery temp stopping the tool before
battery is damaged.
No memory effect so no need to fully discharge battery before charge.
Batteries have a low discharge rate for longer
storage times.
5.0Ah
45minutecharge
4.0Ah
36minutecharge
55minutecharge
6.0Ah
22minutecharge
3.0Ah
GAP.indd 1 02/10/2019 15:35
Cordless ScrewdriversApplication: plasterboard fixing Materials: plasterboard | wooden boards | metal studs Primarily used for fixing drywall panels, it can also be used to fix wooden boards, specialised boards such as fermacell boards and exterior sheathing boards to wood and metal ceilings and walls.• Can be used with Hilti Autofeed attachment (ET080)
Autofeed ScrewdriversApplication: repetative fastening of boardsAutofeed screwdrivers make short work of large-scale fixing tasks on-site. The Autofeed magazine feeds the screws automatically after each fastening, allowing for extremely fast and efficient work-flow on drywall and metal fixings.
Code ET013
Description Cordless Drywall Screwdriver
Model Hilti SD 5000-A22
Battery 22V Li-ion
Max Torque 10 Nm
Code ET080
Description Autofeed Screwdriver
Model Hilti SMD 57 (includes screwdriver)
Makita DFR550RMJ
Screw Capacity 50 45
ET013
Code ET012
Description Construction Screwdriver (TEK)
Model Hilti ST 1800-A
Battery 22V Li-ion
Max Torque 22 Nm
Cordless TEK ScrewdriversApplication: metal fixing and self-drilling fastening Materials: steel | aluminiumSuited for driving self-drilling and self-tapping screws into a range of materials such as steel, aluminium and wood. TEK screwdrivers are suited for prolonged use when fixing metal sheets, sandwich panels, liner trays and fastening metal profiles.
ET012
THE 18V BATTERY WITH OVER 200 PRODUCTS TO CHOOSE FROM
See our full range of cordless products: www.makitauk.com
EFFICIENT POWER MANAGEMENT
OVERLOAD PROTECTION
Allows battery and tool to communicate
protecting form overload.
DISCHARGE PROTECTIONExtends battery life by
stopping the tool before battery capacity is low.
OVER HEAT PROTECTIONMonitors battery temp
stopping the tool before battery is damaged.
ANYTIME CHARGE
LONG STORAGE
Monitors battery temp stopping the tool before
battery is damaged.
No memory effect so no need to fully discharge battery before charge.
Batteries have a low discharge rate for longer
storage times.
5.0Ah
45minutecharge
4.0Ah
36minutecharge
55minutecharge
6.0Ah
22minutecharge
3.0Ah
GAP.indd 1 02/10/2019 15:35
ET080
Cordless Tools / 4
Cordless Impact DriversApplication: tightening of self-drilling anchors and bolts Materials: masonry | metal | wood
Ideal for working in mechanical and electrical trades such as securing flanges, assembling steel profiles, timber or precast concrete components and installing anchors in concrete.
• Not to be used when a specified torque is required
Cordless Drill DriversApplication: drilling and driving Materials: wood | masonry | metal | plasterboard | plastic
Lightweight and highly mobile, cordless drill drivers are a popular ‘all-rounder’ on-site capable of both drilling and fastening applications. Compact in design, these are ideal in both hard to reach and overhead spaces. LED task light on all models allows for added illumination.
ET092
Code ET092 ET084
Description Cordless 18V Drill Driver 22V Cordless Drill Driver
Model Makita DHP481RTJ Makita DHP482RMJ Hilti SF 6H-22A
Battery 18V Li-ion 22V Li-ion
Shank Size 1.5 - 13mm 1.5 - 13mm 2 - 13mm
Max torque 60Nm / 115Nm 36Nm / 62Nm 50Nm / 80Nm
Max Drilling DepthWood: 76mm
Masonry: 16mm Steel: 13mm
Wood: 38mm Masonry: 13mm
Steel: 13mm
Wood: 125mm Steel: 13mm
Weight 3kg 1.8kg 2.2kg
Code ET127 ET116
Description Cordless 1/4” Impact Driver Cordless 1/2” Impact Driver
Model Makita DTD154RTJ
Makita DTD152RMJ
Hilti SID 4-A22
Hilti SIW 22T-A
Makita DTW285RMJ
Makita DTW1002RTJ
Battery 18V Li-ion 22V Li-ion 18V Li-ion
Shank Size 6.35mm (1/4”) Hex 13mm (1/2”) Square
Max torque 175Nm 165Nm 194Nm 450Nm 280Nm 1000Nm
Weight 1.5kg 1.6kg 3.7kg 1.7kg 3.6kg
ET127
5 / Cordless Tools
Cordless SDS MAX Combi HammersApplication: heavy-duty drilling and breaking Materials: reinforced concrete | masonry | stone
Larger than SDS+ systems, SDS MAX combi hammers offer increased power and performance. Designed for sustained heavy duty concrete drilling, SDS MAX systems can perform multiple applications due to interchangeable drill attachments. Hammer action as a secondary function.
Cordless SDS+ Combi HammersApplication: drilling and light chiselling Materials: concrete | masonry | stone
Designed for prolonged drilling in concrete and masonry, SDS+ drills are a site all-rounder used by most tradesmen. Capable of drilling into masonry and concrete, they also have the ability for light chiselling as a secondary function. All models come with dedicated dust extraction attachments as an additional hire option.
• TE 4-A22 does not include chiselling feature
ET082
ET180
Code ET125 ET084 ET082 ET138
Description Cordless 18V SDS+ Hammer Drill Cordless 22V SDS+ Hammer Drill Cordless 36V SDS+ Hammer Drill
Model Makita DHR242RMJ Hilti TE 4-A22 Hilti TE 6-A22 Hilti TE 6-A36 Makita DHR280ZJ Hilti TE 30-A36
Power 18V Li-ion 22V / 5.2Ah Li-ion 22V / 3.0Ah Li-ion 36V / 2.6Ah Li-ion Twin 18V Li-ion 36V / 5.2Ah Li-ion
Max Drilling Depth
Concrete: 24mm Steel: 13mm
Concrete: 16mm Steel: 10mm
Concrete: 20mm Steel: 13mm
Concrete: 20mm Steel: 13mm
Concrete: 28mm Steel: 13mm Concrete: 28mm
Weight 3.8kg 3.3kg 3.7kg 3.7kg 4.9kg 5.7kg
Code ET180 ET148
Description Cordless SDS MAX Combi Hammer
Model Hilti TE 60-A36 Makita DHR400ZKU
Battery 36V / 9.0Ah Li-ion Twin 18V Li-ion
Max Drilling Depth 18 - 40mm 40mm
Impact Energy 8.1J 8.0J
Weight 8.1kg
Cordless Tools / 6
Cordless Finish NailersApplication: nailing wooden boards and panels Materials: timberCordless premium gas driven angled finish nailer for 20-degree angled brads 16-gauge from 32 to 64mm. Can be used for skirting boards, door-stops, stair rails, window casing, beading, tongue and groove panelling and architraves to walls and ceilings.
Cordless Fixing ToolsApplication: direct fastening to materials Materials: concrete | masonry | steel | aluminiumThe BX3 range offers a highly manoeuvrable and practical option for material fastening on-site. Capable of fastening materials such as steel tracking, plasterboard, trunking and conduits to surfaces such as concrete, masonry and steel.
Code CT005 CT020
Description Finishing Nail Gun Cordless Fixing Tool
Model Paslode Impulse 65A F16 Hilti BX 3-L Hilti BX 3-ME
Battery 7.4V / 2.1Ah Li-ion 22V / (2.6/3.2/5.2)Ah Li-ion
Capacity 100 30 nails 20 nails
Weight 2.1kg 3.5kg 3.5kg
CT005
Cordless SDS MAX Demolition HammersApplication: chiselling, chipping and scaling Materials: concrete | masonry | metal (scaling)Offering exceptionally powerful 36V Li-ion performance and the mobility of a cordless tool, cordless demolition hammers offer the breaking capability of a wired demolition hammer outwith a regular power source. • TE 300 compatible needle scaler option• Active Vibration Reduction (AVR)
Code ET170 ET190
Description Cordless Chipping Hammer Cordless Demolition Hammer
Model Hilti TE 300-A36 Hilti TE500-A36
Battery 36V / 5.2Ah Li-ion 36V / 9.0Ah Li-ion
Impact Energy 3.6J 7.8J
Max Chiselling 430 cm³/min 1000 cm³/min
Weight 4.9kg 7.9kg
ET190
7 / Cordless Tools
Cordless Mitre SawsApplication: continuous on-site cutting Materials: softwoods | plasterboardEasily transported and capable of cutting 45-degrees to either side. Double sliding rails give a smooth, precise cut that requires a small working area, providing extremely fast and efficient wood cutting on-site. Twin 18V batteries match the cutting power and speed as wired versions. • Cuts up to 300mm in a single pass
Code SS121 SS122
Description Cordless Mitre Saw
Model Makita DLS714NZ Makita DLS110Z
Battery Twin 18V Li-ion
Blade Diameter 190mm 260mm
Max mitre range 47 - 57° 60 - 60°
Weight 13.5kg 27.3kg
SS121
Cordless Reciprocating SawsApplication: freehand cutting and demolition Materials: wood | steel | aluminium | plastic | fibreglassCordless reciprocating saws are highly portable and allow the user to cut vertically and above shoulder height for prolonged periods. Suitable for roofing and shopfitting applications, these are capable of straight or angled cuts and specialise in pipe cutting and wooden materials.• Particularly useful for free-hand cutting
Code SS063
Description Cordless Reciprocating Saw
Model Hilti SR 30-A36 Makita DJR187RTE
Battery 36V / Ah Li-ion 18V Li-ion
Stroke Length 32mm
Weight 5.2kg 3.8kg
SS063
Code 165x20-DCS-W24-A 190x30-DCS-W24 160x20-PCD-FB-6A
Application Wood (20mm bore) Wood (30mm bore) Fibreboard
Recommended circular and mitre saw blades Recommended reciprocating saw blades
Code D-RSB-003 D-RSB-005 D-RSB-009 D-RSB-010
Application Sheet Metal (3-8mm)
Sheet Metal (1.5 - 4mm) Coarse Wood Board / MDF
Cordless Tools / 8
Cordless Circular SawsApplication: precision straight-line cutting Materials: wood | sheet metal (SS093 only) | laminates Suitable for ripping and cross cutting both softwood and hardwood sheet materials, cordless circular saws can be used for general carpentry work such as cutting rafters to length, cutting tenons and trimming roof battens to length. The SCM 22-A is specially designed for cutting sheet metal and offers a metal chip collector for cold metal cutting. • Height and angle adjustable sole plate
Code SS062 SS089 SS093
Description Cordless 5” Circular Wood Saw
Cordless 7” Circular Wood Saw
Cordless 5” Circular Metal Saw
Model Hilti SCW 22-A
Makita DHS680RMJ
Hilti SC 70W-A22
Hilti SCM 22-A
Battery 22V Li-ion 18V Li-ion 22V Li-ion 22V Li-ion
Max Cutting Depth 57mm 70mm 57mm
Max Blade Diameter 165mm 190-190mm 165mm
Weight 4kg 3.3kg 4.5kg 4.1kg
SS062
Cordless JigsawsApplication: precision cutting Materials: wood | sheet metal | plastic | laminatesVersatile and mobile, suitable for cutting straight or curved lines in wood, plastic or sheet metal on interior sites. Features a compact and lightweight design with ergonomic rubberised handle and an adjustable base for maximum precision cutting.
Code SS049
Description Cordless Jigsaw
Model Makita DJV180RMJ Makita DJV182RMJ
Battery 18V Li-ion
Max Cutting Depth Steel: 10mm | Wood: 135mm Steel: 10mm | Wood: 135mm Aluminium: 20mm
Stroke Length 26mm
Weight 3kg 2.7kg
SS049
Recommended jigsaw blades
Code D-JSB-002 D-JSB-005 D-JSB-011
Application Wood - Coarse Wood - fine Metal
9 / Cordless Tools
Code 230DU-MITAL 230DPU/C 230DPCM
Application Metal Concrete General Purpose
Recommended cut off saw blades
Cordless Cut Off SawsApplication: precision straight-line cutting Materials: roof tiles | masonry | metal | paving blocks An innovative and new lightweight tool suited to roofers, capable of being carried up ladders to allow cutting at roof level. Makes short work of roofing tiles, bricks, metal and paving blocks. Emission free, it can be used both indoors and outdoors and comes with dust control compatibility.
SS133
Code SS133
Description Cordless Cut Off Saw
Model Stihl TSA 230
Battery 36V / 4.8Ah Li-ion
Max Cutting Depth 70mm
Max Blade Diameter 230mm
Weight 3.9kg
ET033
Cordless Angle GrindersApplication: cutting and grinding Materials: steel | concrete | rebar | masonry | stoneA general all-rounder, cordless angle grinders offer both versatility and mobility. Interchangeable discs allow for a range of applications for varied materials such as cutting and grinding steel and mineral base products, removing coatings on cement and screed, cutting and grinding.
Code ET033 ET200
Description Cordless Mini Grinder Cordless Grinder
Model Hilti AG 125-A22 Makita DGA517RTJ Makita DGA900PT2
Battery 22V / 5.0Ah Li-ion Twin 18V Li-ion
Disc Diameter 125mm 230mm
Max Cutting Depth 34mm 22mm
Weight 2.7kg 3.1kg 8.0kg
Code 230DPU/C 230DSBM 230DPWB 230DPVB
Application Concrete Building Materials
Wood & Plastics Multi purpose
Recommended Angle Grinder Blades
Cordless Tools / 10
NEED MORE POWER?Visit page 37 for electric cutting tools
11 / Cordless Tools
Code ET139
Description Cordless Multi Tool
Model Makita DTM50Z
Battery 18V Li-ion
Oscillation Angle 3.2°
Weight 2.2kg
Cordless Multi ToolApplication: sanding Materials: steel | concrete | rebar | masonry | stone Designed as a tool of all trades, multi tools are capable of sanding, scraping, cutting, sawing, grinding, trimming and polishing - due to their compatibility with a range of attachments. • Variable speed control dial
ET139
Cordless Orbital Sander Application: precision sanding Materials: steel | concrete | rebar | masonry | stone Suitable for anything from general sanding through to fine finishing according to the paper grade. Ergonomic tool body fits user’s hand perfectly, providing sure grip and easy handling whether in a single or double handed operation.
Code ET042
Description Cordless Orbital Sander
Model Makita DBO180RMJ
Battery 18V Li-ion
Pad Size 123mm
Orbits per minute 14000/19000/22000 spm
Weight 1.7kg
ET042
WOODWORKING
Cordless Power PlanersApplication: wood trimming and stock removal Materials: woodUsed for fast and accurate stock removal from doors, frames and wooden beams. Can also finish wood to specific widths, giving an accurate and smooth finish. Depth adjustment allows for 0.1mm increments and a V-shaped groove on the baseplate makes chamfer cutting seamless.
Code ET310
Description Cordless Power Planer
Model Makita DKP180RM
Battery 18V Li-ion
Planing Depth / Width 2mm | 82mm
Weight 3.5kg
ET310
Cordless RouterApplication: cutting groves and bevels Materials: woodA cordless tool capable of cutting grooves and rabbets, shaping, bevelling, making profiles and decorative cutting in wood edges and plunged cuts. A common item used in decorative woodworking, cordless routers offer a simple solution to produce decorative mouldings.
Code ET320
Description Cordless Router
Model Makita DRT50ZX4
Collet Capacity 3/8” and 1/4”
Plunge Capacity Trimmer: 0 - 40mm | Plunge: 0 - 35mm
Weight 2.1kg
ET320
Cordless Biscuit Jointer Application: cutting biscuit slots Materials: timberA cordless biscuit jointer creates neat and clean slots in wood to prepare for the insertion of wooden biscuits to join wood edges together. Ideal for creating bespoke joinery, commercial cabinets and shelving.• Biscuit dowels available (sizes 0, 10 & 20)
Code ET330
Description Cordless Biscuit Jointer
Model Makita DPJ180RMJ
Battery 18V Li-ion
Blade width 4mm
Weight 3.1kg
ET330
Cordless Tools / 12
13 / Cordless Tools
Cordless Die GrinderApplication: grinding & surface preparation Materials: metalDesigned for precision grinding and contouring in tight spots and awkward to reach areas, die grinders allow for rough-deburring and fine grinding of steel and metal materials, giving a smooth, clean finish. Ideal for workshops and engineering applications.• Ideal for edge preparation before welding
Code ET300
Description Cordless Die Grinder
Model Makita DGD800
Battery 18V Li-ion
Collet Capacity 6mm
Weight 2kg
ET300
Cordless NibblerApplication: cutting sheet metal Materials: steel | aluminiumThe manoeuvrable nature of cordless nibblers allows for portable and continuous cutting of trapezoidal, corrugated and rolled sheet metals and profiles.
Code ET340
Description Cordless Nibbler
Model Makita DJN161Z
Battery 18V Li-ion
Max Cutting WidthMild Steel: 1.6mm
Stainless Steel: 1.2mm Aluminium: 2.5mm
Weight 2.3kg
ET340
METALWORKING
Tool Chests Application: secure tool storage Designed to deter thieves, CNC formed and fully welded 2.5mm and 3mm steel provides protection and storage for expensive tools on-site. With heavy steel plate construction, it is virtually impregnable. Complete with gas struts on large model to aid opening.
Code SV001 SV002
Description Tool Chest - Small Tool Chest - Large
Model Armorgard TB2 Armorgard TBC4
Dimensions (mm)Length: 1150 Height: 640 Width: 615
Length: 1150 Height: 1265 Width: 615
Weight 75kg 125kg
SV001 & SV002
Battery Charging BanksApplication: charging tool batteries on-site Offers a safe and secure charging location containing 10 drawers with unique digit codes capable of charging power tool batteries and electronic devices. RCD protection ensures no electric damage to the unit or charging devices.
Code MC060
Description Battery Charging Bank
Model Defender E92000
Dimensions:Length: 455mm Height: 1880mm Width: 275mm
Weight 63kg
Cordless Tools / 14
MC060
POWER TOOLSTRY NOWTRY NOW SCAN HEREPRODUCED BY
POWER TOOLS
JERSEY
London South
London North
LONDON
London South
London North
South West
Midlands
Midlands
North East
North West
Scotland
Tewkesbury
Swansea
St AustellPlymouth
Oxford
Grouville
Exeter
Cardiff Bristol
Bridgwater
Bournemouth
Docklands
Tilbury
Portsmouth
Maidstone
Croydon
Brighton
Watford
WalthamCross
Reading
Milton Keynes
Heathrow
Colchester
Telford
Peterborough
Nottingham
Norwich
Northampton
Leicester
Birmingham
Whitehaven
Wallasey
Stoke on Trent
Preston
ManchesterLiverpool
LancasterDouglas
Carlisle
Bangor
York
Sheffield
Newcastle
Middlesbrough
Lincoln
Leeds
Hull
Doncaster
Bradford
Sighthill
Motherwell
Leith
Kinning Park
Kilmarnock
Inverness
Falkirk
Elgin
Dunfermline
Dundee
Anniesland
Aberdeen
TOOL HIRE
TOOL DEPOTS
Hatton Cross
WembleyKentish Town
Tower Bridge
0333 202 [email protected]