COPYRIGHT SILCA SpA 2006 LeonardoSilca S.p.A. Leonardo

COPYRIGHT SILCA SpA 2006

Leonardo Silca S.p.A.

LeonardoLeonardo



Electronic automatic key-cutting machine for flat cylinder and vehicle keys, and cruciform keys*.

* *

* Keys to be cut only with the 4-sided clamp provided



Main Features

Innovative and practical design

Ergonomic

Easy intuitive use

Maximum precision in key cutting

Safe devices to safeguard the operator

Special devices to safeguard the internal parts of the machine

Conformity to CE standards



Main Features

Compact Fast key-cutting times Maximum quality key cutting Tolerance on copy for spaces and

depths is +/- 0.05 mm

395 mm535 mm

360

mm



Main Features

Four-sided clamps for housing a wide range of keys with different features. Keypad with retro-illuminated display: ergonomic and situated on the front. Automatic counting function of the cut keys at the end of each cutting cycle.



Cutting Method

Cutting of copies with the following functions:

Copy from an original Copy with adjustments



Cutting Method:

Copy from an original

For simultaneous reading of original keys and key cutting (approx. 25 sec. for flat keys with 5 pins).

The optic reader makes it possible to simultaneously read the cutting profile and cut the key blank.



Cutting Method: Copy with adjustments

Used to make manual adjustments to very worn keys or to eliminate imperfections in the cutting depth and/or pitch of the original key.

For reading original keys and cutting copies: approx. 25+25 sec. for flat keys with 5 pins.*

* Excluding time needed by the operator to set up adjustments.

Depth adjusting

Spaces adjusting



Technical Characteristics

Movements Automatic movements on the X and Y axes.

Electronic movement control by step motor

Software Machine software with user friendly menu and advanced machine test functions.

RS232 serial port for connection to a personal computer for updating.




Four sided clampsFour sided reading and cutting clamps for housing a wide range of flat cylinder and vehicle keys, and cruciform keys.




Safety

Buzzer with different sounds for end of cycle (=cut key ready) and alarm status (=machine stopped, inspection required)

Semi-Transparent safety shield to protect the operator, with microswitch control.

Emergency stop push button conveniently situated on machine front.




Work Area

Neon lamp to illuminate work area (“ON” with machine on).

Basic 9-key keypad, with retro-illuminated 4x20 character display.

Two side trays for excellent swarf collection.



Technical features

Optical reader

Key reading by means of an electronic optic device:

absolute precision and reliability in reading the key cuts;

original key is protected as there is no contact with it.



Main Features

Semi-automatic Gauging System

Leonardo has a semi-automatic gauging system for both the standard and semi-automatic clamps.

This allows the operator to make the necessary adjustments in the event of discrepancies in tolerances, using a series of simple operations guided by instructions shown on the key-cutting machine display.



TECHNICAL DATAPower supply 230V - 50 Hz

Cutter motor Single phase, 1 speed

Cutter In high speed steel (HSS)

Movements on 2 axes with ball screws driven by step motors on

rectified roller guides and ball bushes

Standard clamp universal 4 sided clamp for flat, vehicle and cruciform

keys

Runs X axis: 74 mm Y axis :45 mm

Dimensions width: 395 mm, depth: 535 mm, height: 360 mm

Mass Kg 50 (with Loader Unit)

Kg . 43 (with Standard Clamp)



Standard Accessories Standard prismatic cutter in HSS steel Full set of accessories for use and maintenance Universal 4-sided clamp

Optional Accessories Hard metal cutter Automatic key loader



Key Loader: Operates without compressed air.

Special powered clamp to automatically secure the key to be cut; interchangeable with the basic four-sided clamp.

Automatic detection of special clamp for the automatic loader.

Cutting data storage. When the original key has been read, the machine stores the data in its memory so that any number of copies can be made.

OPTIONAL



Automatic LoaderOperating Characteristics

Dedicated device to ensure key stop position in the special clamp.

OPTIONAL



Automatic LoaderOperating Characteristics

Key stacker for 20 to 30 keys (max.), adjustable according to key dimensions.

OPTIONAL



Key Loader Functions – Performance

Operation without compressed air.

Key stacker for 20 to 30 keys (max.), adjustable according to key dimensions.

Automatic removal device for single keys.

Special powered clamp, with automatic opening and closing to release/secure the key to be cut.

Mechanical slide for automatic collection of the cut keys.

OPTIONAL

Documents

COPYRIGHT SILCA SpA 2006 LeonardoSilca S.p.A. Leonardo