Copie de Nr81pl2 1350 Mig Ed06

7/29/2019 Copie de Nr81pl2 1350 Mig Ed06

1/157

6 15.09.2009 RELEASED F.Casasole M.Ierace E.Biscuola N.Ajani

ED DATE CHANGE NOTE APPRAISAL AUTHORITY ORIGINATOR

Optics

ED

1/157157157157

Allrightsreserved.

Passingonan

dcopyingofthis

document,useandcommunicatio

nofitscontents,not

permittedwithoutwrittenauthoriz

ationfromA

lcatel

RELEASED

Allrightsreserved.

Passingonan

dcopyingofthis

document,useandcommunicatio

nofitscontents,not

permittedwithoutwrittenauthoriz

ationfromA

lcatel

8DG 31466 AAAA TCZZA

6

1350 Management Suite

Migration Guide

NR8.1PL2

Supprim : 9


2/157

Allrightsreserved.

Passingon

andcopyingofthis

document,useandcommunica

tionofitscontents,not

permittedwithoutwrittenauthorizationfromA

lcatel

1AA000140004(9711)A4

2/157Optics

ED 6 RELEASED


SUMMARY

1 INTRODUCTION................... ................... .................... ................... ..................... ..................... 81.1 GENERAL INFORMATION..................... ................... ..................... .................... ..................... ................. 81.2 HANDBOOK APPLICABILITY .................... .................... ..................... ................... .................... ............... 81.3 PRODUCTRELEASE HANDBOOKS.................... ..................... ................... ..................... .................... .... 9

1.3.1 Handbooks related to the specific software application........................................................... 91.3.2 NR 8.1 Related Handbooks ..................................................................................................... 9

1.4 REGISTERED TRADEMARKS................... ................... ..................... ................... .................... .............. 101.5 CONVENTIONS................. ..................... ................... ..................... .................... ..................... ............ 101.6 OVERVIEW .................. ..................... .................... ..................... ................... ..................... ................ 111.7 DOCUMENT OVERVIEW .................. ................... .................... .................... .................... ................... .. 111.8 WHATS IN THIS DOCUMENT................... ................... ..................... ................... .................... .............. 12

2 MIGRATION PROJECT AND PRODUCT INFORMATION.................................................... 132.1 RESTRICTIONS AND PRECONDITIONS .................. .................... .................... .................... ................... . 13

2.1.1 Mandatory Patches ................................................................................................................ 132.1.2 RM and BM-ETH DB schema check on the starting NR........................................................13

3 MIGRATION IN A COMPLEX NETWORK ............................................................................. 163.1.1 One Shot ISE Migration................. ................... ..................... ................... ................... ........... 163.1.2

Stepped ISE Migration ........................................................................................................... 16

3.1.3 One Shot Migration with Spare .............................................................................................. 173.1.4 Stepped Migration with Spare................................................................................................17

4 IN SYSTEM EVOLUTION (ISE)...... .................. .................... .................. ................... ............. 204.1 PREPARATION GUIDE LINES .................. ................... ..................... ................... .................... .............. 21

4.1.1 Evaluate the ISE prerequisites............................................................................................... 214.1.2 Perform the System Backup .................................................................................................. 214.1.3 NMS SWPDESC, OS-Conf and Install Wizard Upgrade ....................................................... 214.1.4 Predispose a temporary file system for Data Export.............................................................. 214.1.5 Predispose the system for the NR8.1PL2 software. .............................................................. 224.1.6 Install NR8.1PL2 software................ .................... .................. .................... .................. .......... 244.1.7 Customize OS-Kernel............ ................... ..................... ................... .................... .................. 274.1.8 Customize Instances Subjected to ISE.................................................................................. 284.1.9 Preparing for 1354RM Instance Configuration....................................................................... 314.1.10 Export and Import of System Configuration ........................................................................... 314.1.11 Configure Instances Subjected to ISE ................................................................................... 334.1.12 Create DB schema reference files ......................................................................................... 334.1.13 Perform the Application Backup............................................................................................. 344.1.14 Export, Import, and Conversion of Instances Subjected to ISE Migration ............................. 344.1.15 Shutdown the database of the new NMS subjected to ISE Migration ................................... 354.1.16 Restoring 1354RM DB Initialization file.................................................................................. 35

4.2 ONE SHOT ISEGUIDE LINES ................... .................... .................... ................... .................... ........... 374.2.1 Shutdown running application subjected to ISE Migration..................................................... 374.2.2 De-Activate previous OS-Kernel ............................................................................................ 374.2.3 Activate NR8.1PL2 OS-Kernel............................................................................................... 374.2.4 Resume Predispose............................................................................................................... 384.2.5 Update Poseidon License ...................................................................................................... 394.2.6 Upgrade Software Platform.................................................................................................... 394.2.7 Customize GoGlobal-UX........................................................................................................ 394.2.8 NMS Integration ..................................................................................................................... 404.2.9 Startup NMS applications & verify behaviour......................................................................... 404.2.10 1354RM NE and alarm synchronization.................................................................................40


3/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

3/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

4.2.11 1354RM audit ................... ................... .................... ................... .................... ..................... ... 414.2.12 1354BMETH align up............................................................................................................. 414.2.13Alarm Federation configuration.............................................................................................. 424.2.14 1354RM pre-OTN to OTN migration...................................................................................... 424.2.15 Remove Obsolete Data and Software ................................................................................... 42

4.3 STEPPED ISEGUIDE LINES ................. ..................... ................... ..................... ................... .............. 454.3.1 Shutdown running application subjected to ISE Migration..................................................... 454.3.2 De-integration...................... ................... .................... ................... .................... ..................... 454.3.3 De-Activate previous OS-Kernel ............................................................................................ 454.3.4 Activate NR8.1PL2 OS-Kernel............................................................................................... 464.3.5 Resume Predispose............................................................................................................... 474.3.6 Update Poseidon License...................................................................................................... 474.3.7 Upgrade Software Platform.................................................................................................... 474.3.8 Customize GoGlobal-UX........................................................................................................ 484.3.9 Customize old client instances............................................................................................... 484.3.10 Remote client instances upgrade........................................................................................... 504.3.11 NMS Integration..................................................................................................................... 504.3.12 Startup NMS applications & Verify Behaviour........................................................................ 514.3.13 1354RM NE and alarm synchronization ................................................................................ 514.3.14 1354RM Audit ........................................................................................................................ 514.3.15 1354BMETH align up............................................................................................................. 524.3.16Alarm Federation configuration.............................................................................................. 524.3.17 1354RM pre-OTN to OTN migration...................................................................................... 534.3.18 Remove Obsolete Data and Software ................................................................................... 53

5 MIGRATION WITH SPARE SYSTEM .................................................................................... 565.1 ONE SHOT MIGRATION WITH SPARE SYSTEM..................... ................... ..................... ................... ...... 57

5.1.1 Obtain source system variables............................................................................................. 575.1.2 Install hp-ux on target system................................................................................................ 575.1.3 Install & Predispose the system for the NR8.1PL2 software. ................................................ 585.1.4 Install the application software on target system ................................................................... 595.1.5 Customize the application software on target system ........................................................... 62

5.2 STEPPED MIGRATION WITH SPARE SYSTEM................... .................... .................... ................... .......... 665.2.1 Obtain source system variables............................................................................................. 665.2.2 Install hp-ux on target system................................................................................................ 665.2.3 Install & predispose for old client instances ........................................................................... 675.2.4 Install & predispose the system for the NR8.1PL2 software.................................................. 705.2.5 Install the application software on target system ................................................................... 715.2.6 Customize the application software on target system ........................................................... 75

5.3 MIGRATION WITH SPARE SYSTEM COMMON PROCEDURE .................................................................... 785.3.1

NMS Master System Configuration........................................................................................ 78

5.3.2 Create DB schema reference files ......................................................................................... 785.3.3 Install migration tools ............................................................................................................. 795.3.4 Data Export from Source and Import to Target System......................................................... 795.3.5 Data Conversion .................................................................................................................... 805.3.6 System Swap ......................................................................................................................... 80

6 VERIFY PRE-CONDITIONS ................. .................... .................. ................... .................. ....... 856.1 CHECK SOFTWARE REQUIREMENTS................. ..................... ................... .................... .................... ... 85

6.1.1 Identify the current software................................................................................................... 866.1.2 Identify the target software..................................................................................................... 89

6.2 CHECK HARDWARE REQUIREMENTS ................ ..................... ................... ..................... ................... ... 906.3 CHECK SOFTWARE REQUIREMENTS................. ..................... ................... .................... .................... ... 92

7 PLATFORM UPGRADE ......................................................................................................... 937.1 UPGRADE PLATFORM TO THE LATEST OS-CONF PATCH ...................................................................... 93


4/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

4/157Optics

ED 6 RELEASED


8 APPENDIX A: SUMMARY TABLES .................. .................. ................... ................... ............ 959 APPENDIX B: SW PACKAGES................ .................... .................. ................... .................. .. 9910 APPENDIX C: REQUIRED DISK SPACE ................... ................... .................... ................ 10211 APPENDIX D: NMS SWPDESC, OS-CONF AND INSTALL WIZARD UPGRADE .......... 10412 APPENDIX E: DATA EXPORT/IMPORT................... .................. ................... ................. ... 10613 APPENDIX F: 1353NM DATA CONVERSION............. .................. .................... ................ 11314 APPENDIX G: 1354RM DATA CONVERSION.................. .................. ................... ........... 11415 APPENDIX H: 1354BM-ETH DATA CONVERSION................ .................... .................. .... 13816 APPENDIX I: 1354RM SEC (SECURITY) DATABASE ADAPTATION ................. ........... 14317 APPENDIX J: CUSTOM WARNING AND ERROR............. .................. ................... .......... 14618 APPENDIX K: NEW DISK REQUEST................... .................. ................... .................. ...... 14819 APPENDIX L: RETRIEVE HP-UX SYSTEM INFORMATION .................. .................. ........ 15020 APPENDIX M: 1354RM PRE-OTN TO OTN MIGRATION.................... .................. ........... 15121 APPENDIX N: TROUBLESHOOTING....................... .................. ................... .................. .. 154


5/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

5/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

1. TABLE

Table 1. Processes for 1354RM Database...................................................................................................36Table 2. Upgrade/ISE - Software Packages and Data Instances.................................................................95Table 3. Upgrade/ISE - NMS Instance Information ......................................................................................96Table 4. NR7.4 NMS version for Install_Wizard .................... .................. ..................... .................. ..............97Table 5. 1354RM Process Configuration......................................................................................................97Table 6. 1353NM Process Configuration......................................................................................................98Table 7. Upgradeable NMS software............................................................................................................99Table 8. NMS Versions from NR7.1 to NR 7.4 ................... ................... ..................... ................... .............100Table 9. NMS Version from NR 7.1D/7.2 to NR 7.4 ..................................................................................100Table 10. NMS Version from NR7.3 to NR7.4............................................................................................100Table 11. NMC keys .................. ................... ..................... ................... ..................... ................... ..............101Table 12. NMS Specific Administration Users............................................................................................101Table 13. Disk requirements for NMS Software for NR8.1 PL2 .................................................................102Table 14. Disk requirements for NMS Software for NR8.1 PL2 .................................................................103Table 15. Oracle Not Relevant Errors In Database Conversion.................................................................140Table 16. 1353NM Useless Custom Error and Warning messages...........................................................146Table 17. 1354RM Useless Custom Error and Warning messages...........................................................147


6/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

6/157Optics

ED 6 RELEASED


A. FIGURES

Figure 1 - Migration Starting configuration...................................................................................................... 19Figure 2 - Migration Target configuration........................................................................................................ 19Figure 3 - Upgrade System, Instance, List window ........................................................................................ 29Figure 4 - ISE Customize Parameter Definition window................................................................................. 30Figure 5 - Upgrade Custom log window. ........................................................................................................ 31

Figure 6 - Upgrade System, Instance, List window ........................................................................................ 49Figure 7 - Upgrade System, Instance, List window ........................................................................................ 63Figure 8 - Customize Parameter Definition window........................................................................................ 64Figure 9 - Upgrade Custom log window. ........................................................................................................ 65Figure 10 - Upgrade System, Instance, List window ...................................................................................... 76Figure 11 - Customize Parameter Definition window...................................................................................... 76Figure 12 - Upgrade Custom log window. ...................................................................................................... 77Figure 13 - Prerequisite System Instances List Window ................................................................................ 87Figure 14 - Export GUI window................... .................. .................... ................... ................... ...................... 107Figure 15 - Import GUI window..................................................................................................................... 108Figure 16 - Operator in SEC graphical interface ........................................................................................ 143Figure 17 - Remove of the profile with the same name of Operator .......................................................... 144Figure 18 - Operator profile list................................................................................................................... 144Figure 19 - Disks configuration Example...................................................................................................... 149


7/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

7/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

HISTORY

Edition Date Notes

Ed02 It05 = Ed03 Oct 2008 Third Edition

Internal Ed04 Nov 2008 internal use only (R&D)

Ed04 = Internal

Ed05

Nov 2008 Forth Edition

Ed05 = internaled09

March 2009 Fifth Edition

Inclusion Patch 5 BM ETH and new conversionscripts for BM.

Ed06 = internaled10

September 2009 Sixth edition


8/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

8/157Optics

ED 6 RELEASED


1 INTRODUCTION

1.1 General Information

WARNING

ALCATEL makes no warranty of any kind with regards to this manual, and specifically disclaims the impliedwarranties of merchantability and fitness for a particular purpose. ALCATEL will not be liable for errorscontained herein or for damages, whether direct, indirect, consequential, incidental, or special, in connection

with the furnishing, performance, or use of this material

NOTICE

The product specification and/or performance levels contained in this document are for information purposesonly and are subject to change without notice. They do not represent any obligation on the part of ALCATEL.

COPYRIGHT NOTIFICATION

The technical information of this manual is the property of ALCATEL and must not be copied, reproduced ordisclosed to a third party without written consent.

1.2 Handbook applicability

This handbook applies to the following productreleases:

PRODUCT ANV P/N

1350

PRODUCT RELEASE VERSION (N.B.) ANV P/N

1350 8.1 8.1

N.B.: NOTES FOR HANDBOOKS RELEVANT TO SOFTWARE APPLICATIONS

Handbooks relevant to software applications (typically the Operators Handbooks) are not modifiedunless the new software version distributed to Customers implies man-machine interface changes or incase of slight modifications not affecting the understanding of the explained procedures.

Moreover, should the screen prints included in the handbook contain the productreleases versionmarking, they are not replaced in the handbooks related to a subsequent version, if the screen contents areunchanged.


9/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

9/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

1.3 Productrelease handbooks

The list of handbooks given here below is valid on the issue date of this Handbook and canbe changed without any obligation for ALCATEL to update it in this Handbook.

Some of the handbooks listed here below may not be available on the issue date of thisHandbook.

The standard Customer Documentation in the English language for the equipment whose productreleaseversion is stated in para.1.2 on page 7 consists of the following handbooks:

1.3.1 Handbooks related to the specific software application

REF HANDBOOK ANV Part No. THISHANDBOOK

[1] 1350 Rel8.1 Installation Guide

[2] 1350 Rel8.1 Administration Guide

1.3.2 NR 8.1 Related Handbooks

REF HANDBOOK ANV Part No.THISHANDBOOK

[3] 1350 Rel. 7.1D/7.2/7.3/7.4/8.1 OND NetworkManagement Configuration Guide

3AL 88851 AAAA

[4] 1359HA OS-Cluster 7.1 Installation and AdministrationGuide

3AL 88127 BAAA

[5] 1354BMETH 7.3.0.5 Administration Guide 3AL 86503 BAAA

[6] 1354BMETH R7.3 Operators Handbook 3AL 86503 AAAA

[7] 1353NM 7.3 Administration Guide 3AL 89082 BAAA

[8] 1354RM 7.4 Administration Guide 3AL 61112 BAAA

[9] 1359HA OS-Resilience 7.1.1 Administration Guide 3AL 88129 BAAA

[10] 1355VPN 5.0 Administration Guide 3AL 72136 CAAA

[11] 1359IOO 5.2 Administration Guide 3AL 88346 AAAA

[12] 1359ISN 5.0 Administration Guide 3AL 88219 AAAA


10/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

10/157Optics

ED 6 RELEASED


1.4 Registered Trademarks

1. UNIX is a registered trademark of UNIX System Laboratories in the U.S.A. and other countries.2. OSF/Motif is a trademark of the Open Software Foundation.3. HP is a registered trademark of Hewlett-Packard Corporation.4. HP9000 and HP-UX are trademarks of Hewlett-Packard Corporation.5. ORACLE is a registered trademark of Oracle Corporation.

1.5 Conventions

The following conventions are used in this manual:

[Enter] A key name is shown between square brackets to indicate that you press a namedkey on the keyboard.

Cour i er Courier font included in a grey box is uses to indicate the output produced by thesystem or data that you can find.

Bold Courier Bold courier indicates information that you must enter from the keyboard.

Cour i er Courier indicates system prompts.

Arial shown between angle brackets means that these data depending by theparticular instance of the system. It must be substituted with the correct data.

Reference Double quotation Arial italic means a cross reference.

For semplicity, throughtout the guide 1 will be used as instance id. Obviously substitute it with the realinstance id.


11/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

11/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

1.6 Overview

Audience

This document describes the technical process to migrate some1 OND Network Management applicationrunning on HP platform to Network Release 8.1.

The intended readers are:

1. Alcatel Product Managers

2. Alcatel Project Leaders

3. Alcatel Field Engineers

4. Alcatel employees who have to plan or to execute migration tasks

This document was written with the customer in mind but anyhow, it contains Alcatel proprietary informationand shall not be released to customers without prior adaptation to customer needs and skills.

Scope

The document contains the technical description of the steps needed to successfully update a TMNapplication:

1. In System Evolution (ISE): this approach allows updating the running application installing on aseparate installation tree the target SW; during this phase the application can be up and running.

Note: this document does not describe your particular migration, but should only serve as a guideline forwriting your customized handbook. It is not allowed to use this guideline as your customer specific handbook,without needed customizations.

1.7 Document Overview

This document provides the guidelines to upgrade an Alcatel TMN system installed with one of the followingconfigurations to NR8.1PL2 network release:

Alcatel Software Components.NetworkRelease

Mandatory Any combination of IM or USM or both

NR7.1T PL1 OS-Kernel 7.1.1 1353NM 7.0.13, 1354RM 7.1.42

NR7.1D/7.2PL2

OS-Kernel 7.1.2 1353NM 7.0.13, 1354RM 7.1.80, 1354BMETH 7.1.1 P14 2,1354BMETH 7.3 P1

NR7.3 OS-Kernel 7.1.2 1353NM 7.0.14, 1354RM 7.3, 1354BMETH 7.1.1 P14

NR7.4 OS-Kernel 7.1.2 1353NM , 1354RM , 1354BMETH

1 The upgrade is supported only the version specified in Upgradeable NMS software table.

2 The 1354BM ETH is supported only starting with NR7.1D/7.2 PL1.


12/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

12/157Optics

ED 6 RELEASED


Any software configuration not included in this table cannot be object of upgrade or migration with thisdocument.

1.8 Whats in this document

This document includes the following topics:

1. Chapter 1 Introduction

Document introduction with convention and short chapter descriptions.2. Chapter 2 Migration project and product information

3. Chapter 3 Migration In A Complex Network

4. Chapter 4 In System Evolution (ISE)

It provides the guidelines to upgrade the software on the running system, and switch over to newsoftware when ready. It has been design to reduce the downtime and the system freeze time, andthe involved hardware resource.

5. Chapter 5 Migration With Spare System

6. Chapter 6 Verify Pre-conditions

This chapter describes how to identify the installed software and verify if the migration preconditionare met.

7. Chapter 7 Platform Upgrade

It describes how upgrade HP-UX and third party software on the system.

8. Appendixes

The appendixes include some common procedure in migration.


13/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

13/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

2 MIGRATION PROJECT AND PRODUCT INFORMATION

This chapter provides some hints about the operational aspects of the migration project and some productinfo like precondition and restrictions

2.1 Restrict ions and Preconditions

Hereafter the list of restrictions and precondition to be fulfilled before the migration can start.

2.1.1 Mandatory Patches

NR8.1PL2 DR4 composition + 1354RM 7.5.0.1-P16 + 1354BMETH 8.1.5.3-P6RP1 must be installed on thetarget system in order to run the migration.

NR8.1 PL2 DR4 composition foresees, in addition to the SW delivered via DVD also two additional patches,OS-KERNEL 7.1.2-RP19.6 and 1354RM 7.5.0.1-P15.

2.1.2 RM and BM-ETH DB schema check on the start ing NR

To highlight possible differences in RM and BM-ETH db schema of the target NR that already exist in the dbschema of the starting NR it is strongly recommended to execute db schema check also on the starting NR,using the procedure detailed hereafter.The procedure can be executed anytime before the migration. Ifrelevant differences are discovered please ask for support before starting the migration.

The procedure must be executed on a spare machine installed with the same software/patch of the customermachine. Do not use customer machines!

2.1.2.1 Create DB schema reference files

After creating new databases on the spare machine execute the following procedure.

If you are checking 1354RM db schema:

1. Login on the spare machine as usersnml

2. If necessary startup 1354RM database:. . . $ cd /usr/Systems/1354RM_1. . . $ . ./.snmlrc. . . $ cd ORACLE/databases/dbnml/etc. . . $ start_db

3. Get a snapshot of the database:

. . . $mkdir /alcatel/DEPOT/NR_RM_DB_Ref

(if you get an error execute, as root: chmod 777 /alcatel/DEPOT e repeat the command)

. . . $ chmod 777 /alcatel/DEPOT/NR_RM_DB_Ref

. . . $ cd /usr/Systems/1354RM_1/ORACLE/script/

. . . $ ./MIB_Contents get /alcatel/DEPOT/NR_RM_DB_Ref

4. Stop 1354RM database:

. . . $ cd /usr/Systems/1354RM_1

. . . $ cd ORACLE/databases/dbnml/etc

. . . $ stop_db


14/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

14/157Optics

ED 6 RELEASED


If you are checking 1354BMETH db schema:

1. Login on the spare machine as userbmml

2. If necessay startup 1354BMETH database:

. . . $ cd /usr/Systems/1354BMETH_1

. . . $ . ./.bmmlrc


. . . $ start_db


. . . $mkdir /alcatel/DEPOT/NR_BMETH_DB_Ref

(if you get an error execute, as root: chmod 777 /alcatel/DEPOT e repeat the command)

. . . $ chmod 777 /alcatel/DEPOT/NR_BMETH_DB_Ref

. . . $ cd /usr/Systems/1354BMETH_1/ORACLE/script/

. . . $ ./MIB_Contents get /alcatel/DEPOT/NR_BMETH_DB_Ref

4. Stop 1354BMETH database:



. . . $ stop_db

2.1.2.2 DB Backup /Restor e

Backup (or export) RM and/or BMETH db on the customer machine and restore (or import) it on the sparemachine.

2.1.2.3 Check DB schema

If you are checking 1354RM db schema:

1. Login on the spare machine as usersnml

. . . $ cd /usr/Systems/1354RM_1

. . . $ . ./.snmlrc

. . . $ sqlplus $NXNL_DATABASE

. . . $mkdir /alcatel/DEPOT/NR_RM_DB_Cust

. . . $ chmod 777 /alcatel/DEPOT/NR_RM_DB_Cust2. Get a snapshot of the database:

. . . $ cd /usr/Systems/1354RM_1/ORACLE/script/

. . . $ ./MIB_Contents get /alcatel/DEPOT/NR_RM_DB_Cust

3. Compare the current DB schema with the expected one (one only line):

. . . $ ./MIB_Contents compare /alcatel/DEPOT/NR_RM_DB_Ref/alcatel/DEPOT/NR_RM_DB >/alcatel/DEPOT/NR_RM_DB_Diff.log

4. Check the log file just created:

. . . $ vi /alcatel/DEPOT/NR_RM_DB_Diff.log

If you find any significant difference please contact TEC Italy before starting the migration.

If you are checking 1354BMETH db schema:


15/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

15/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

1. Login on the spare machine as userbmml


. . . $ . ./.bmmlrc

. . . $ sqlplus $NXNL_DATABASE

. . . $mkdir /alcatel/DEPOT/NR_BMETH_DB

. . . $ chmod 777 /alcatel/DEPOT/NR_BMETH_DB


. . . $ cd /usr/Systems/1354BMETH_1/ORACLE/script/

. . . $ ./MIB_Contents get /alcatel/DEPOT/NR_BMETH_DB

3. Compare the current DB schema with the expected one (one only line):

. . . $ ./MIB_Contents compare /alcatel/DEPOT/NR_BMETH_DB_Ref/alcatel/DEPOT/NR_BMETH_DB >/alcatel/DEPOT/NR_BMETH_DB_Diff.log

4. Check the log file just created:

. . . $ vi /alcatel/DEPOT/NR_BMETH_DB_Diff.log

If you find any significant difference please contact TEC Italy before starting the migration.


16/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

16/157Optics

ED 6 RELEASED


3 MIGRATION IN A COMPLEX NETWORK

The 1350 Management Suite is a hierarchical architecture, where many systems can operate together toperform their job.

Apply a migration procedure in this environment requires to have a clear picture of the machine relationship,and how proceed in the upgrade on different machine.

When more than one system is involved in migration, it can be performed in two ways:

1. One Shot: all NMSs are migrated at the same time. This approach is mandatory for cohostedMaster NMSs.

2. Stepped: first 1354RM and 1354BMETH are migrated, then 1353NM

Warning! In any case it is mandatory to migrate 1354RM and 1354BMETH at the same time orat least to ensure that 1354BMETH and 1354RM do not communicate in the temporary periodbetween 1354BMETH migratio n and 1354RM one. A way to achieve it is, for example, not to

start the mediator.

Warning! During stepped migrations (with Spare or ISE) always migrate remote client instancesafter their respective master instance. Not doing so can have disruptive effects on the sys tem!

3.1.1 One Shot ISE Migration

If you have to upgrade from the configuration shown in Figure 1 - to the one shown in Figure 2 - you have toproceed this way:

1. Start the migration on all system at once.

2. Predispose for the final configuration.

3. Install the foreseen software.

4. Customize the off line Master and Client instances of the new software version.

5. Perform Master instances System configuration, data export/import and conversion.

6. Deactivate the source NR and activate the target one.

7. Execute the integration.

8. Start the system.

9. Remove old instances and software.

3.1.2 Stepped ISE Migration


1. Start with BM-ETH/RM server.

a. Predispose the system for the target configuration (new software and new NMS instances)

b. Install the entire software requested (BM-ETH 8.1.5, RM 7.4.9 and NM 7.4.5).

c. Customize the RM 7.4.9 and BM-ETH 8.1.5 Master instances.

d. Perform Master instances System configuration, data export/import and conversion.

e. Deactivate the source NR and activate the target one.


17/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

17/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

f. Customize each NM 7.0 Client in the target NR.

g. Execute the integration.

h. Start the system.

2. For each 1353NM Master:

a. Predispose the system for the target configuration (New software and new NMS instances)

b. Install the entire software requested (NM 7.4.5).

c. Customize the NM 7.4.5 Master instance.

d. Perform Master instances System configuration, data export/import and conversion.

e. Remove integration of NM 7.0 Master from RM 7.4.9/BM-ETH 8.1.2

f. Deactivate the source NR and activate the target one.

g. Decustom NM 7.0 Client instance on RM 7.4.9/BM-ETH 8.1.2

h. Custom NM 7.4.5 Client on RM 7.4.9/BM-ETH 8.1.2

i. Execute the integration.

j. Start the system.

3. Only when all the NM 7.0 Clients have been upgraded to 7.4.5 you can remove old instances andsoftware on all the machines.

3.1.3 One Shot Migration with Spare


Install the spare machines.

Perform data export/import and conversion.

Swap the system.

Start the system.

3.1.4 Stepped Migration with Spare


a. Start with BM-ETH/RM server.

a. Install target Os-Conf.

b. Install old SWPDESC and Install_Wizard.

c. Predispose for NM 7.0 SWP and Client Instance.

d. Install NM 7.0 software.

e. Upgrade to target SWPDESC and Install_Wizard.

f. Predispose the system for the target configuration (new software and new NMS instances)

g. Install the entire software requested (BM-ETH 8.1.5, RM 7.4.9 and NM 7.4.5).

h. Customize the RM 7.4.9 and BM-ETH 8.1.5 Master instances.

i. Perform Master instances System configuration, data export/import and conversion.

j. Customize each NM 7.0 Client in the target NR.


18/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

18/157Optics

ED 6 RELEASED


k. Execute the integration.

l. Start the system.

1. For each 1353NM Master:

1. Install the spare machine.

2. Predispose the system for the target configuration (New software and new NMS instances)

3. Install the entire software requested (NM 7.4.5).

4. Customize the NM 7.4.5 Master instance.

5. Perform Master instances System configuration, data export/import and conversion.

6. Remove integration of NM 7.0 Master from RM 7.4.9/BM-ETH 8.1.2

7. Switch over to NM 7.4.5 Master.

8. Decustom NM 7.0 Client instance on RM 7.4.9/BMETH 8.1.2

9. Custom NM 7.4.5 Client on RM 7.4.9/BMETH 8.1.2

10. Execute the integration.

11. Start the system.

2. Only when all the NM 7.0 Clients have been upgraded to 7.4.5 you can remove old instances andsoftware on all the machines.

Mise en forme : Puces et numros


19/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

19/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

Figure 1 - Migration Starting configuration

Figure 2 - Migration Target configuration

BM-ETH 8.1.5 Master ID 1RM 7.4.9 Master ID 1

NM 7.4.5

Client ID 1

NM 7.4.5

Client ID 2

NM 7.4.5 Master ID 1 NM 7.4.5 Master ID 2

Target scenario

BM-ETH 7.3 Master ID 1RM 7.1 Master ID 1

NM 7.0

Client ID 1

NM 7.0

Client ID 2

NM 7.0 Master ID 1 NM 7.0 Master ID 2

Starting scenario


20/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

20/157Optics

ED 6 RELEASED


4 IN SYSTEM EVOLUTION (ISE)

Overview

This chapter describes the In System Evolution (ISE) procedure to upgrade an Alcatel NMS reducing asmuch as possible, the system down time period.

The approach is based on the creation of a new instance as data repository and a new installation tree.

This allows to perform a big portion of the migration leaving the current system up and running.

ISE migration can be performed with both One Shot and Stepped approach. One Shot is mandatory forMaster NMS cohosted on the same machine.

ISE migration foreseen two phases: the first one allows to install and configure the target NMS and iscommon to both One Shot and Stepped migration, the second one is specific to the chosen approach.

Note: This document does not provide information for upgrading NMS installed with 1359HA OS-Clusterprotections; refer 1359HA OS-Cluster 7.1 Installation and Administration Guide [4]

Important Recommendations

Before proceeding with the ISE as described hereafter please verify on TEC WEB site(http://tec.ond.alcatel.it), if there are some additional notes concerning the installation (select NR8NR8.1PL2 Installation_notes). These notes have to be intended as preparations steps for the ISEdescribed in this chapter.


21/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

21/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

4.1 Preparation Guide Lines

4.1.1 Evaluate the ISE prerequisites

Before to start the migration you have to verify that all requested pre-conditions have been correctly fulfilled,and that you have retrieved all data requested during the upgrade; refer to Verify Pre-conditions chapter for

details.

4.1.2 Perform the System Backup

Even if ISE procedure foresees a reverting procedure, it is mandatory to have a full system backup. If you donot have one, you have to do it now by follow the instruction shown at Full Backup/Restore chapter of1350 NM Administration Guide [1].

Note: With disk mirror configuration, backup can be performed on line.

4.1.3 NMS SWPDESC, OS-Conf and Install Wizard Upgrade

1. Login as userroot.

2. Refer to chapterAPPENDIX D: NMS SWPDESC, OS-CONF AND INSTALL WIZARD UPGRADEfor the details related to this upgrade procedure.

Only In case of HP ITANIUM system execute step 3:

3. Copy OS-CONF 8.1.2 P01.2 package into /alcatel/DEPOT directory:

OS-Conf812P01_2.depot (cksum & size: 403368502 51200)

and execute

. . . , s ys , r oot # swinstall s /alcatel/DEPOT/OS-Conf812P01_2.depot\*

4.1.4 Predispose a temporary file system for Data Export

To be able to perform the Data Export is necessary creating a temporary File System.

Retrieve and install the MGT tools as described in the dedicated sections in APPENDIX E: DATAExport/Import

Create a temporary file system for storing the exported data by entering:

. . . , s ys , r oot # cd /

. . . , s ys , r oot # scextendfs /alcatel/ExpTmp

Note: to check in advance the needed disk space perform the following command:

. . . , s ys , r oot # EvalExportSize _-

Mis en forme : Police :Gras,Italique, Anglais(Royaume-Uni)

Mis en forme :Police :Italique

Supprim : Verify Pre-

conditions

Supprim :APPENDIX D:NMS SWPDESC, OS-CONF

AND INSTALL WIZARDUPGRADE

Supprim :APPENDIX E:DATA Export/Import


22/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

22/157Optics

ED 6 RELEASED


Where:

is the NMS instance identification number

is the NMS version

The command returned value must be at least doubled to get the needed free space.

If you are migrating 1354RM or 1354BMETH execute the following command:

. . . , s ys , r oot # /usr/local/bin/adjust_ora_group

4.1.5 Predispose the system for the NR8.1PL2 sof tware.

Warning! If you prefer manual predisposition, to avoid fu ture machine reboot predispose allNMSs now.

Warning! If you need to predispose a NM 7.3 Master instance to manage QB3* NEs, predisposemanually all the instances with the command

. . . , sys root # scmanageswp noreboot

and go directly to step 6

You have now to create a batch file useful to perform the automatic predisposition of NR8.1PL2 NMS andinstances.

1. Login into the system as userroot.

2. If present, remove the symbolic links:

. . . , sys root # cd /alcatel/

. . . , sys root # rm 8.1PL2

. . . , sys root # cd /usr/Systems/

. . . , sys root # rm Global_Instance-7.1.7

. . . , sys root # rm Global_Instance_7.1.7_Master

3. Start scautopredispose tool entering:

. . . , sys root # scautopredispose -o

Where: is the file previously created with scautopredispose tool.

4. Start scmanageswp tool entering:

. . . , sys root # scmanageswp noreboot cmdfile

Where: is the file previously created with scautopredispose tool.

Note: Do not forget noreboot opti on! If its the case, quit the procedure!

Note: The installation from Network Depot can be performed only after the depot set-up, for moreinformation refer to 1350 Rel8.1PL2 Installation Guide [1].

Neglect warnings like the following:

War ni ng: maxdsi z has a new ADD decl ar at i on i n the same 1354BM_code_kpsect i on on the "1354BMETH 8. 1. 5" descr i pt or f i l e.

The f i nal val ue wi l l be t he great er .


23/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

23/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

5. The list of software to be installed will be displayed. At the end, on the screen you should have a listof items selected for the configuration, like to the following:

I t ems SELECTED f or t he CONFI GURATI ON

I t em Type SWP Name SWP Versi on I NSTANCE Number I NSTANCE Di mensi on Opt

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

SWP OS_KERNEL 7. 1. 7

SWP 1354RM 7. 4. 9

SWP 1353NM 7. 4. 5

I NSTANCE OS_KERNEL 7. 1. 7 1 OSKERNEL

I NSTANCE 1354RM 7. 4. 9 1 1354RM_I M_Smal l

I NSTANCE 1353NM 7. 4. 5 1 1353NM_I M_Smal l

Ent er ' a' t o Appl y, ' c' t o Cancel or ' d' t o Di spl ay agai n:

6. In order to preceed in the configuration, enter a.

The procedure will ask where to find the software. You can choose between CD-ROM/DVD ornetwork depot. If you choose depot, you have to refer to /alcatel/SCDEPOT on the depot system.

If free space currently available on configured disks is not enough for NR8.1PL2 new requestedareas, procedure will ask for new disks. See APPENDIX K: New Disk Request for more info.

7. Reply R to the following question to execute file system extension at the next reboot:

Fi l e System: "/ dev/ vg00/ l vol 4" i s busy, check pr ocess wi t h PI D( s) :

.

Press:

[ T] = Try agai n ( but af t er you have at t empt t o cl ose al l pi d( s) )

[ A] = Abort ( DANGEROUS - oper at i on i s abor t ed)

[ R] = Reboot ( RECOMMENDED - oper at i on wi l l be compl et ed af t er nextr eboot )

t hen pr ess [ Ent er ]

At the end of software upgrade, the following message will be shown:

scmanageswp noreboot - cmdf i l e SESSI ON was successf ulATTENTI ON: t o compl ete t he conf i gurat i on f or t he Mi grat i on use t hecommand: scmanages wp resume

NOTE: at r esume t i me t he syst em REBOOT WI LL be act i vat ed.

If the directory /SCINSTALL/execution_parking/ contains some files execute:

. . . , s ys , r oot #mv /SCINSTALL/execution_parking/* /SCINSTALL/execution/

If the symbolic link /opt/tao_1.4 does not point to /opt/tao1.4l_p7 execute:

. . . , s ys , r oot # ln -sf /opt/tao1.4l_p7 /opt/tao_1.4


Supprim :APPENDIX K:New Disk Request


24/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

24/157Optics

ED 6 RELEASED


4.1.6 Install NR8.1PL2 software

Overview

Hereafter it is explained how to install NR8.1PL2 software during the ISE procedure.

The installation process can be performed either using the CD-ROM or using the Network depot: accordingthe installation method you have to follow the related sections in this chapter.

Note: The installation from Network Depot can be performed only after the depot set-up, for moreinformation refer to 1350 Rel8.1PL2 Installation Guide [1].

OS-Kernel Installation

This section describes how to install OS-Kernel from CD-ROM or Depot created for Alcatel TMN software in directory of depot system:

WARNING: The OS-Conf upgrade can cause the root password expiration; in this case enter anew one.

Login as root user with a Unix shell (withoutgraphical interface: do n ot execute this procedure viaGoGlobal-UX)

Enter the following command:

. . . , s ys , r oot # cd /alcatel/Install_Wizard

If CD-ROM installation :

Insert SWP-NR81_ADD01 volume 1/1 medium in the CD drive.

Start the OS-KERNEL installation by entering the following command sequence.

. . . , s ys , r oot # scmountcd /dev/dsk/ /SD_CDROM

. . . , s ys , r oot # ./Install.sh install force OS-KERNEL -cdrom

On the screen will appear the following question related to the CD drive:

Pl ease ent er t he Devi ce Name of sour ce medi a [ c0t0d0] :

Reply [Enter] to confirm, or type e different CD device file name if the default one is not ok.Replace the CD_ROM with the new one when (and if) requested..

If DEPOT installation :

Start the OS-KERNEL installation by entering the following command (one only line).

. . . , sys, r oot # ./Install.sh install force OS-KERNEL


25/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

25/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

In both cases:

The installation script starts. The procedure asks you to select the version to be installed by issuing:

======================================================================I nstal l ati on OS- KERNEL package

======================================================================- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

1) OS- KERNEL 7. 1. 2- 19. 2 ( 08. 01PL2)2) OS- KERNEL ( )

E) Exi t- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -NOTE: Sel ect t he product ver si on t o be managed . . .

Neclect the following message:

NOTE: Pr epar i ng t o i nstal l . . .St art Sessi on[ 12] : : cannot execut eSt art Sessi on[ 12] : I NSTALLER | awk ' {pr i nt }' : not f ound

Enter the order number of OS-Kernel according with its target version as reported in table Table 23belonging to Appendix A: Summary tab les

This activity takes approximately 45 minutes.

Sometime messages like the following will be issued:

WARNI NG: The l i nk / al cat el / Kernel poi nt s t o an ot her s di r ect ory

/ al catel / / Ker nel di f f er ent t o the cur r ent one/ al catel / 8. 1PL2/ Kernel , ski ppi ng i t . . .

Dont worry about it.

Verify the correct installation checking the file:

/alcatel/Install_Wizard/log/Installation_OSKERNEL_#.log


Dismount the CD-ROM and remove the medium from the drive:

. . . , s ys , r oot # umount /SD_CDROM

NMS Software Installation

This paragraph describes how to install NR8.1PL2 NMS software from CD-Rom or from network depot.

Execute this procedure for each NMS you have predisposed the system for.

1. Login into the system as userroot.

2. Enter the following command sequence:




Start the NMS installation by entering the following command sequence.


. . . , s ys , r oot # ./Install.sh -install force -cdrom

Where the key has to be replaced with the NMS name

Mis en forme : Police :Gras,Italique

Supprim : Table 4

Supprim :App endi x A:Summary tables


26/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

26/157Optics

ED 6 RELEASED




Reply [Enter] to confirm, or type e different CD device file name if the default one is not ok.

Replace the CD_ROM with the new one when (and if) requested.

If DEPOT installation :

Install each NMS subject to ISE Migration entering the following command:

. . . , sys, r oot # ./Install.sh -install force

Where the key has to be replaced with the NMS name

In both cases:

The installation script starts. The procedure asks you to select the version to be installed by issuing:

======================================================================I ns tal l at i on package

======================================================================1) ( 08. 01PL2)2) ( )


Enter the item ID according the NMS application type you are upgrading and linked target version asreported in table Table 23 belonging to Appendix A: Summary tab les .

The time requested by activity depends by the installing NMS, the 1353NM can require up to 2h and30 minutes.

Sometime messages like the following will be issued:

WARNI NG: The l i nk / al cat el / Kernel poi nt s t o an other s di r ect ory/ al catel / / Ker nel di f f er ent t o the cur r ent one/ al catel / 8. 1PL2/ Kernel , ski ppi ng i t . . .

Dont worry about them.

Repeat steps for each NMS subject to ISE Migration

Verify the correct installation checking the file:

/alcatel/Install_Wizard/log/Installation__#.log




NMC Software Installation (ETH_MEDIATOR / ISN / IOO / etc)

This paragraph describes how to install NR8.1PL2 NMC (Components) software from CD-ROM or AlcatelDepot.

- Login into the system as userroot.

- Enter the following command sequence:

Mis en forme : Police :Gras, Italique

Supprim : Table 4

Supprim :App end ix A: Summ arytables


27/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

27/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA




Start the NMC installation by entering the following command sequence.


. . . , s ys , r oot # ./Install.sh -install -cdrom

Where the key has to be substituted as indicated in table in Table 30



Reply [Enter] to confirm, or type e different CD device file name if the default one is not ok.

Replace the CD_ROM with the new one when (and if) requested.

If DEPOT installation:

Install each NMC subject to ISE Migration entering the following command:

. . . , s ys, r oot # ./Install.sh -install

Where the key has to be substituted as indicated in table in Table 30

In both cases:

3. The installation script starts. Sometime messages like the following will be issued:

WARNI NG: The l i nk / al cat el / Kernel poi nt s t o an ot her s di r ect ory/ al catel / / Ker nel di f f er ent t o the cur r ent one/ al catel / 8. 1PL2/ Kernel , ski ppi ng i t . . .

Dont worry about it.

4. Repeat step for each NMC subject to ISE Migration.

5. Verify the correct installation checking the file:

/alcatel/Install_Wizard/log/Installation__#.log




4.1.7 Customize OS-Kernel

1. Login as root user.

2. Enter the following command sequence.


. . . , s ys , r oot # ./Install.sh custom OS-KERNEL

3. The procedure asks you to select the version to be customized by issuing:

======================================================================Cust omi zat i on OS- KERNEL package

======================================================================- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

1) OS- KERNEL 7. 1. 2- RP15 ( )

Supprim : Table 11

Supprim : Table 11


28/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

28/157Optics

ED 6 RELEASED


2) OS- KERNEL ( )


Enter 1 [Enter], according the OSK target version as reported in table Table 23 belonging toAppendix A: Summary tables

Reply n [Enter] to the following question to execute the OS-Kernel customization:

NOTE: Do you want to execut e OS- KERNEL Cust om? [ y| n| q]

Edit the file

/alcatel/8.1PL2/Kernel/lib/lib_perl/Semaphores.pm

and change the line 61 from

my $MIN_SEMAPHORE_NUM=7182;

to

my $MIN_SEMAPHORE_NUM=8182;

. . . , sys, r oot # /alcatel/8.1PL2/Kernel/script/KernelCustomize

Immediately after KernelCustomize completion execute the following commands:

. . . , s ys , r oot # cd /usr/Systems/Global_Instance_7.1.7_Master/APACHE/script/

. . . , s ys , r oot # ./tomcat_stop.sh

. . . , s ys , r oot # ./apache_stop.sh

Neglect the possible message: httpd (no pid file) not running

Verify the correct customization checking the file:

/alcatel/Install_Wizard/log/Customization_OSKERNEL_#.log/alcatel/8.1PL2/Kernel/maintenance/log/KernelCustomize.log

4.1.8 Customize Instances Subjected to ISE

Warning! Always migrate any client instance in the topology afterits respective master instance. Whatmust be absolutely avoided is to customize the new client instance before its master. Not doing so canhave disruptive effects on the system!

You can now customize the local NMS master, subject to ISE Migration ( Table 27, Table 28 and Table29 where New Instance column contains "YES).

If GENOS is installed remove from /etc/services all the lines related to almcpa entries (ports 20001 / 20002 /20003 / 20004 / 20005).

If you are migrating 1354RM execute:

. . . , sys, r oot #mkdir p /opt/JacORB2.1.3.5/classes

a. Login into the system with graphical interface as userroot (execute this procedure viaGoGlobal-UX).

Mis en forme : Police :Gras, Italique

Supprim : Table 4

Supprim :App end ix A: Summ arytables

Supprim : Table 8

Supprim : Table 9

Supprim : Table 10


29/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

29/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

b. Start the custom process by entering:

. . . , sys root # cd /alcatel/Install_Wizard

. . . , s ys , r oot # ./Install.sh -custom

c. The procedure asks you to select the version to be customized by issuing:

======================================================================Cust omi zat i on package

======================================================================- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

1) ( )2) ( )


d. Enter the item ID according the NMS application type you are upgrading and linked targetversion as reported in table Table 23 belonging to Appendix A : Summary tab les

Reply y [Enter] to the following question to execute the customization:

NOTE: Do you want t o execut e Cust om? [ y| n| q]

The Customize script will issues a sequence of windows depending by the specific NMS, withSystem,Instances,List

Figure 3 - Upgrade System, Instance, List window

e. Move the cursor on [Choose_One] button and press on mouse selection button to open the list.

f. Select New instance and release the button.

g. Pull down the Action menu and select Apply & Exit. A window similar to the following shouldappear:

Mis en forme : Police :Gras,Italique

Supprim : Table 4

Supprim :App endi x A:Summary tables


30/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

30/157Optics

ED 6 RELEASED


Figure 4 - ISE Customize Parameter Definition window.

h. Fill the fields in the Parameter Definition window as specified in the Table 22 (see AppendixA: Summary tables) according the NMS you are customizing.

Note: Some customization procedure can issue specific sub-configuration window, refer tospecific administration guide for more info.

i. Pull down the Action menu and select Apply & Exit

The customization process takes up to 2 hours, depending by the NMS and the systemperformances. The log of the activity will be shown in a window like this:

Mis en forme : Police :Italique

Supprim : Table 3

Supprim :Appendix A: Summarytables


31/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

31/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

Figure 5 - Upgrade Custom log window.

Note: The custom can issue warning and error messages that have to be ignored, refer toAppendix J: Custom Warning and Error.

j. Verify the correct customization of the NMS checking in the files:

/alcatel/Install_Wizard/log/Customization__#.log/alcatel/Kernel/maintenance/trace/Custom.trace/alcatel/Kernel/maintenance/log/Custom.log

k. Launch the following command if you need to customize another new instance or, if finishedcontinue with the next paragraph:

... , sys , root # ./Install.sh custom

l. Follow points 3 to 9 for each instance to customize.

4.1.9 Preparing for 1354RM Instance Configuration

If the NMS is a 1354RM:

1. Login into the system as root user.

2. Change the following files permission:

. . . , sys root # chmod R 777 /usr/Systems/1354RM_1-7.4.9/FWK/poller

. . . , sys root # chmod R 777 /usr/Systems/1354RM_1-7.4.9/trcLevel

Ignore warning like the following:WARNI NG: chmod: can t change comet 2pol l i ngmgr_1354RM_5- 7. 4. 9_: Nor ownerWARNI NG: chmod: can t change st op_pol l er : Nor owner

3. Save database parameter file (db_params.cfg) entering the following commands:

. . . , sys root # cd /usr/Systems/1354RM_1-7.4.9

. . . , sys root # cd databases/dbsnml/admin/pfile

. . . , sys root # cp p db_params.cfg db_params.cfg.orig

4. Edit db_params.cfg setting the processes keyword to 100 (3 occurrences).

4.1.10 Export and Import of System Configuration


Supprim :Appendix J:Custom Warning and Error


32/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

32/157Optics

ED 6 RELEASED


For each NMS installed and subjected to ISE migration, perform the export and import of SystemConfiguration executing the following steps:

Execute system config export as described in section System Configuration Export ofAPPENDIX E: DATA Export/Import.

Perform system config import as described in section System Configuration Import ofAPPENDIX E: DATA Export/Import.

Mis en forme : Police :Italique,Anglais (tats-Unis)




Supprim : System ConfigurationExport

Supprim :APPENDIX E: DATAExport/Import

Supprim : System ConfigurationImport



33/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

33/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

4.1.11 Configure Instances Subjected to ISE

Perform the System Configuration of the new Master instances customized in Customize InstancesSubjected to ISE

3. Login into the system with a graphical Interface as alcatel user.

4. Start the System Configuration tool by entering:

$ . /alcatel/8.1PL2/Kernel/env/Kernel

$ /alcatel/8.1PL2/Kernel/etc/SystemConfig -

Where:

is the NMS product. is the NMS instance identification number. is the NMS target version.

(e.g.: / al cat el / 8. 1PL2/ Ker nel / et c/ SystemConf i g 1354RM 1- 7. 4. 9)

5. All the subsystems present in the source NMS will be automatically selected. Its mandatory toreconfigure all processes with the mouse right button, creating new databases and updating theparameters that refer to the old Network Release. Also verify their configuration according to theinformation stored in the Table 24, Table 25 in Appendix A: Summary tables. Remember toadd new mandatory subsystems.In case of 1353NM first of all add Supervision_Area_# Subsystem, insert correct values in NECOM.

In case of 1354BM-ETH select New for the TAO_Interface Repository, Add EMLIM_Proxy eNMLIM_Proxy subsystems.

6. Pull down Main menu and select Update Config to start the System Configuration.

7. Verify the correct System Configuration of the NMS checking in the files:

/alcatel/8.1PL2/Kernel/maintenance/log/SystemConfiguration_*.log

8. Repeat the procedure for each new NMS Master instance created and subjected to ISE Migration.

4.1.12 Create DB schema reference f iles

If you are migrating a 1354RM, execute the following commands to create RM DB schema reference files:

1. Login into the system as usersnml

2. Startup 1354RM database:

. . . $ cd /usr/Systems/1354RM_1-7.4.9

. . . $ . ./.snmlrc


. . . $ start_db


. . . $mkdir /alcatel/DEPOT/NR81PL2_RM_DB_Ref

(if you get an error execute, as root: chmod 777 /alcatel/DEPOT and repeat the command)

. . . $ chmod 777 /alcatel/DEPOT/NR81PL2_RM_DB_Ref

. . . $ cd /usr/Systems/1354RM_1-7.4.9/ORACLE/script/

. . . $ ./MIB_Contents get /alcatel/DEPOT/NR81PL2_RM_DB_Ref

4. Stop 1354RM database:

. . . $ cd /usr/Systems/1354RM_1-7.4.9


Mis en forme :

Police :Italique

Supprim : CustomizeInstances Subjected to ISE

Supprim : Table 5

Supprim : Table 6

Supprim :Appendix A:Summary tables


34/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

34/157Optics

ED 6 RELEASED



. . . $ stop_db

If you are migrating a 1354BMETH, execute the following commands to create BMETH DB schemareference files:

1. Login into the system as userbmml

2. Startup 1354BMETH database:

. . . $ cd /usr/Systems/1354BMETH_1-8.1.5

. . . $ . ./.bmmlrc


. . . $ start_db


. . . $mkdir /alcatel/DEPOT/NR81PL2_BMETH_DB_Ref

(if you get an error execute, as root: chmod 777 /alcatel/DEPOT and repeat the command)

. . . $ chmod 777 /alcatel/DEPOT/NR81PL2_BMETH_DB_Ref

. . . $ cd /usr/Systems/1354BMETH_1-8.1.5/ORACLE/script/

. . . $ ./MIB_Contents get /alcatel/DEPOT/NR81PL2_BMETH_DB_Ref

4. Stop 1354BMETH database:

. . . $ cd /usr/Systems/1354BMETH_1-8.1.5


. . . $ stop_db

4.1.13 Perform the Application Backup

From now onwards no activity on t he networks are allowed (stop network con struction &provisioning )

Perform the SMF backup on tape and disk devices of Network, PM, AS, Operator and SEC on each NMSsystem. This will allow restoring the data machine by machine.

4.1.14 Export, Import, and Conversion of Instances Subjected to ISE Migration

Hereafter are described the steps to follow in order to execute the export, the import and the conversion ofthe data.

Perform the export, import, conversion executing the following steps:

1. Login into the system as root user

2. Execute data export as described in section Data ExportofAPPENDIX E: DATA Export/Import.

3. If you are going to import many operators (> 50) execute this wa to save time:

cd /alcatel/8.1PL2/Kernel/binmv UserConfiguration UserConfiguration.shvi UserConfiguration

insert the following 2 lines:

#!/bin/sh

/alcatel/Kernel/bin/UserConfiguration.sh $* > /dev/null &



Supprim : Data Export



35/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

35/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

save and exitchmod 777 UserConfiguration

4. Perform data import as described in section Data Import of APPENDIX E: DATA Export/Import.

5. If the NMS is a 1353NM:

Perform data conversion has described in APPENDIX F: 1353NM Data Conversion.

5. If the NMS is a 1354RM:

Extract required XML packages from OS_Conf 7.1.2P02.

If available on depot:

. . . , s ys , r oot # swinstall -s : \ [Enter]

XML-NamespaceSupport* XML-SAX* XML-SIMPLE*

If available on DVD:

a. Insert OS-Conf 7.1.2 P02 (or OS-ConfUX 8.1.1 P05) DVD.b. . . . , s ys , r oot # scmount /dev/dsk/ /SD_CDROM

c. . . . , s ys , r oot # swinstall -s /SD_CDROM \ [Enter]

XML-NamespaceSupport* XML-SAX* XML-SIMPLE*

d. . . . , s ys , r oot # umount /SD_CDROMe. Extract DVD.

Neglect messages starting with: ERROR: Could not apply the software selection ..

Perform data conversion has described in APPENDIX G: 1354RM Data Conversion.

6. If the NMS is a 1354BM-ETH:

Perform data conversion has described in APPENDIX H: 1354BM-ETH Data Conversion.

4.1.15 Shutdown the database of the new NMS subjected to ISE Migration

If the NMS is a 1354RM, shutdown the database of the new NMS Master subjected to ISE Migrationexecuting:

1. Login into the system as usersnml

2. Execute:

$ cd /usr/Systems/1354RM_1-7.4.9 $ . ./.snmlrc $ cd ORACLE/databases/dbnml/etc $ stop_db

4.1.16 Restoring 1354RM DB Initialization file

If the NMS is a 1354RM:

1. Login into the system as snml user.

2. Restore database initialization files entering the following commands:

$ cd /usr/Systems/1354RM_1-7.4.9 $ cd databases/dbsnml/admin/pfile

$mv db_params.cfg.orig db_params.cfg

Mis en forme :Police :Italique, Anglais(tats-Unis)





Supprim : Data Import

Supprim :APPENDIX E:DATA Export/Import

Supprim :APPENDIX F:1353NM Data Conversion

Supprim :APPENDIX G:

1354RM Data Conversion

Supprim :APPENDIX H:1354BM-ETH Data Conversion


36/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

36/157Optics

ED 6 RELEASED


$ cd /usr/Systems/1354RM_1-7.4.9 $ cd ORACLE/databases/dbnml/admin/pfile

Edit init1.ora setting the processes keyword (1 occurrence) according to the following table:

NMS\db dimension Small Medium Large

1354RM 200 400 1100

Processes for 1354RM Database


37/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

37/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

4.2 One Shot ISE Guide Lines

4.2.1 Shutdown running application subjected to ISE Migration.

Note: It is suggested to inform all users in advance that the system will be shutdown.

Shutdown any running application by:

1. Login into the system in graphical mode as user alcatel.

2. Start TMN-OS application, by clicking on icon:

3. Identify local NMS Master instances subjected to ISE migration referring to Appendix B: SWPackages, Table 27, Table 27 and Table 28 (depending on your starting NR), where NewInstance column contains "YES.

4. Highlight NMS master instance by clicking on the related icon shown in the OSs object area.

5. Click on OS pull down on TMN-OS menu-bar, then on Stop System.

6. Confirm stop command by clicking on OK button ofConfirm popup window.

7. Repeat steps 4-6 for each NMS Master subjected to ISE migration.

8. Logout from all user sesssions.

4.2.2 De-Act ivate previous OS-Kernel

De-activate previous OS-Kernel executing as userroot:

. . . , s ys , r oot # /alcatel/Kernel/bin/DeactivateKernel.pl

4.2.3 Activate NR8.1PL2 OS-Kernel

You have now to activate the new OS-kernel:

Login as userroot

Adjust the connection manager reference in the /etc/inittab file executing:a. Edit the /etc/inittab file

b. Modify the line related with the connection manager. Change from

KCM: 4: r espawn: / al cat el / / Kernel / etc/ r un_conmgr

to

KCM: 4: r espawn: / al cat el / 8. 1PL2/ Kernel / etc/ r un_conmgr

Get connnection manager processes PID executing:

. . . , s ys , r oot #ps -ef | grep conmgr

The command output looks like:

r oot 8148 1 0 Nov 20 ? 0: 03 / bi n/ ksh/ al cat el / 7. 1D/ Kernel / et c/ r un_conmgr


Supprim :Appendix B: SWPackages

Supprim : Table 8

Supprim : Table 8

Supprim : Table 9


38/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

38/157Optics

ED 6 RELEASED


r oot 8219 1 0 Nov 20 ? 0: 40 / al catel / 7. 1D/ Kernel / bi n/ conmgr . exe5001

Get conmgr.exe and run_conmgr PIDs (8148 and 8219 in the example).

Kill connnection manager processes executing:

. . . , s ys , r oot # kill 9

Enter the following command to activate the new kernel:

. . . , s ys , r oot # /alcatel/8.1PL2/Kernel/bin/ActivateKernel.pl

Neglect the message: ERROR: lss not running ... if referred to a client instance.

Verify the correct activation of new release by entering:

. . . , sys, r oot # ls -l /usr/Systems

l r wxr- xr- x 1 r oot sys 34 Mar 21 15: 41 1354RM_1 ->/usr/Systems/1354RM_1_7.4.9_Master

l r wxr- xr- x 1 r oot sys 34 Mar 20 09: 12 1354RM_1-7.4.9 ->/usr/Systems/1354RM_1_7.4.9_Master

drwxr wxr - x 52 snml dba 2048 Mar 28 12: 35 1354RM_1_7. 4. 9_Mast er

l r wxr- xr- x 1 r oot sys 41 Mar 21 15: 41 Global_Instance ->/usr/Systems/Global_Instance_7.1.7_Master

l r wxr- xr- x 1 r oot sys 41 Mar 19 17: 30 Global_Instance-7.1.7 ->/usr/Systems/Global_Instance_7.1.7_Master

drwxr wxr wx 21 r oot r oot 1024 Mar 22 09: 22Gl obal _I nstance_7. 1. 7_Master

4.2.4 Resume Predispose.

Now you have to resume the scmanageswp procedure to complete the platform upgrade.

1. Login into the system as userroot without using GoGlobal-UX and start scmanageswp entering:

. . . , s ys , r oot # scmanageswp resume

scmanageswp require you to confirm the request with the following message:

You r equest t o r esume t he pendi ng mi grat i on.

Ar e you r eady to RESUME t he mi grat i on ? ( y/ n)


39/157

1AA000140004(9711)A4

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

39/157Optics

ED 6 RELEASED

8DG 31466 AAAATCZZA

2. Answer y [Enter] to resume the previously suspended predispose.

The system will be reboot. The following message will be shown:

scmanageswp resume SESSI ON was successf ul .

ATTENTI ON: now t o compl ete t he conf i gur at i on Shutdown- Reboot wi l l beexecut ed.

Press [ Ent er ] t o cont i nue.

3. Press [Enter] to proceed. The following message appears:

Execut i ng Shutdown- Reboot t o compl ete t he conf i gur at i on.

**** * The System r eboots aut omati cal l y, pl ease wai t **** *

The procedure will rebuild the HP-UX 11i kernel, and it will install 3PP software requested by NR8.1PL2NMS, before return the prompt.

Note: If CD installation has been specified the predispose procedure will ask to provide the CD-ROMs where the software is stored.

If scmanageswp resume procedure fails and the following (or similar) error appears in/SCINSTALL/scinstall.log:

ERROR: "i pb082: / ": The sof t ware dependenci es f or 1 pr oduct s or f i l eset s cannotbe resol ved. * The anal ysi s phase f ai l ed f or "i pb082: / ". * Anal ysi s had er r or s.

check Appendix N for a possible workaround.

4.2.5 Update Poseidon License

Remember that Poseidon license.dat must be updated, get a valid license file and install it on/opt/Poseidon/etc/license.dat

4.2.6 Upgrade Software Platform

Before starting the upgrade verify if the path /opt/JacORB2.1.3.5 is a normal directory (not a mount point)and has two subdirectories. In such a case execute:

. . . , s ys , r oot # rm -r /opt/JacORB2.1.3.5

Upgrade the platform software according to chapterPlatform Upgrade.

IMPORTANT DO NOT FORGET !

Note: The upgrade execution can take up to three hours depending by the installation method and by theserver model. It can also require some system reboot!

4.2.7 Customize GoGlobal-UX

Note: Do not execute this commands using GoGlobal-UX interface.

Customize GoGlobal-UX software:

, sys, r oot # . /alcatel/8.1PL2/Kernel/env/Kernel


Supprim : Platform Upgrade


40/157

Allrightsreserved.

Passingon

andcopyingofthis




lcatel

1AA000140004(9711)A4

40/157Optics

ED 6 RELEASED


, sys, r oot # /alcatel/8.1PL2/Kernel/script/XTEmulatorConfigure.pl \ [Enter]KernelCustomize

The script asks you the authorization to stop GoGlobal-UX issuing:

GoGl obal 2 server wi l l be st opped. Do you want cont i nue ? ( yes/ no,def aul t =no)

Enter yes [Enter] to proceed.

4.2.8 NMS Integration

For each NMS in NR8.1PL2 execute:

. . . , sys, r oo

Documents

Copie de Nr81pl2 1350 Mig Ed06