Cooling Tower List Price Guide

196 Lower Cherry Street Macon, GA 31201

800-752-1905 478-755-1905

800-203-4925 FAX 478-755-8304 FAX

www.coolingtowersystems.com [email protected]

LIST PRICE GUIDEOver 40 YEARS OF MANUFACTURING!

F.R.P. Cooling Towers Replacement Parts Centrifugal Pumps Optional Equipment Plate Heat Exchangers Accessories

MEMBER

Dear Customer:

We, at Cooling Tower Systems, greatly appreciate your interest in our cooling tower lines and related equipment.

Our cooling tower lines have been manufacturer for over 40 years, with five different models in production. We are the oldest, full-service fiberglass cooling tower manufacturer in the industry today. All our towers are designed, engineered and tested by our own factory R&D laboratory. We feel our towers are considered second to none in quality and energy efficiency, and are much more cost effective when compared to other cooling tower manufacturers.

We have been a member of the Cooling Tower Institute (C.T.I.) since 1972 and rate our cooling towers per their specifications, have standard specifications and C.T.I. certification on our LRC model line.

The additional products we represent have all been selected to compliment each other in order that we may provide complete mechanical packages. We have O.E.M. agreements with all of our suppliers so that we can be very competitive in today's marketplace and supply the best equipment to our suppliers and customers.

We have numerous cooling towers installed across the United states and have a very satisfied customer base to include national account agreements with some of the nation's largest supply houses. Our company provides technical assistance and product data throughout the United States and to international markets for our industrial contractors, mechanical consulting and design engineers, chemical manufacturers, food and beverage manufacturers and processors, refrigeration warehouse companies, industrial buyers and utility companies and a very large dry cleaning market.

We are looking forward to doing business with your company. Regards,

Joe Coates President

196 LOWER CHERRY MACON, GEORGIA 31201 (800) 752-1905 FAX (800) 203-4925 www.coolingtowersystems.com

www.coolingtowersystems.com - 2 - Over 40 Years of Manufacturing Experience

Introduction Letter..................................................................................... 1 Table of Contents...................................................................................... 2 Terms and Conditions............................................................................... 3 Cooling Tower Specifications.................................................................. 4 - 5 Cooling Tower List Price.......................................................................... 6 Stainless Steel Optional Add-On List Price............................................ 7- 8 Low Noise Cooling Tower List Price....................................................... 9 Cooling Tower Replacement Parts List Price......................................... 10-13 Fan Motor List Price.................................................................................. 14 V Belt Speed Reducer Parts List Price.................................................... 15 V Belt & Gear Reducer List Price............................................................ 16 Anti Splash Louver List Price................................................................... 17 Extension Skirt List Price......................................................................... 18 Vertical Remote Sump Tank List Price.................................................... 19 Vertical Storage Tank Specs.................................................................... 20 Winterization Basin Heaters & Heater Control Panel............................. 21 Heater and Control Panel Specifications................................................ 22-23 Vibration Isolation Mounts List Price...................................................... 24 Man Hours Assembly Table...................................................................... 25 Assembly Drawings & Parts Tables for Cooling Towers T-25 through T-3000

T-25 through T-230................................................................................. 26-27 T-240 through T-260............................................................................... 28-29 T-270 through T-2125............................................................................. 30-31 T-2150 through T-2350........................................................................... 32-35 T-2400 through T-3000........................................................................... 36-37

CTS Sample Warranty………………………………………………………. 38 Notes…………………….…………………………………………………….. 39

Table of Contents


Sales: Cooling Tower Systems sells its goods on the expressed condition that the buyer agrees to the terms and conditions stated hereon. The buyer relinquishes any inconsistent or additional terms included in any purchase order. The buyer's acceptance and receipt of the goods shall compose any agreement to such terms and conditions.

Acceptance: All orders are subject to Cooling Tower Systems and Sales department approval and acceptance. Cooling Tower Systems reserves the right to end further delivery upon the buyer's failure to pay any portion of any order, when it becomes due. If the buyer's financial condition becomes unsatisfactory, Cooling Tower Systems may require cash payments or satisfactory security for future deliveries or goods already delivered.

Cancellation: Buyer shall not cancel the order without prior written consent of Cooling Tower Systems.

Deliveries: Cooling Tower Systems shall not be liable for delays in delivery due to causes beyond its reasonable control including but not limited to strikes, fire, war, or acts of God, whether such events occur at or about our warehousing facilities or at the warehousing facilities of our suppliers. Cooling Tower Systems makes no guarantee of shipment by any such date and shall have no liability or other debt for failure to ship on such date due to any cause.

Shipping: The price of all products is F.O.B. Cooling Tower Systems warehousing facilities. Title to goods passes to the buyer upon deliver by Cooling Tower Systems to the freight line. Buyer assumes risk for all goods shipped. The buyer should examine shipments carefully for loss or damages before accepting the shipment. The buyer should have loss and damage noted by transportation agent on the freight bill when accepting delivery. Upon discovery of concealed damage the buyer has fifteen (15) days from receipt of goods to call the freight line for an inspection. In either case, the buyer cannot return equipment to Cooling Tower Systems until completion of a freight inspection. In absence of shipping instructions, Cooling Tower Systems shall use its own discretion in choice of carrier.

Return Policy: Cooling Tower Systems accepts only new and unused material returned for credit. Cooling Tower Systems will charge a minimum of 20% for restocking all material accepted for credit. Buyer must return all goods freight prepaid. Cooling Tower Systems will not accept any goods returned after thirty days.

Cash Discount & Terms: Cooling Tower Systems may charge 1.5% each month on all sums more than thirty (30) days past due. The first charge will be added on the sixty-first (61st) day after the date of invoice. A 2% cash discount on parts and equipment will be issued if the invoice is paid within ten (10) days after invoice.

Prices: All prices are subject to change without notice.

Terms & Conditions


COOLING TOWER SPECIFICATIONS:

Furnish and install an induced-draft, counter flow, field erected, FRP and stainless steel cooling tower of _____ cell(s) as shown on plans. Tower shall be similar and equal to Cooling Tower Systems Model _________.

CAPACITY:

Tower shall be capable of cooling ___________ GPM for water from __________ F. to __________ F. at a design engineering wet bulb temperature of ___________ F. and that the thermal performance shall be guaranteed to perform per plans and specs. After installation if, due to a suspected thermal performance deficiency, the owner chooses to conduct an on-site thermal performance test under supervision of a qualified, disinterested third party, and witnessed by the manufacturer, in accordance with the CTI or ASME standards during the first year of operation, and if the tower fails to perform within the limits of test tolerances; then the cooling tower manufacturer will pay for the cost of the test and will make such corrections as are appropriate and agreeable to the owner to compensate for the performance deficiency.

CONSTRUCTION:

The cold water basin, casing section shall be constructed of fiberglass-reinforced polyester (FRP). Fasteners and all other associated hardware shall be constructed of 304 Stainless Steel, (SUS). All other standard metal components, such as supports, grilles, or tower supports, are to be constructed of Hot Dipped Galvanized Steel, (H.D.G.S.), unless otherwise specified by customer. (Can be 304 SUS or 316 SUS).

MECHANICAL EQUIPMENT:

Fan(s) shall be propeller type, incorporating heavy-duty cast aluminum blades. Blades shall be individually adjustable and replaceable. Fan Assemblies shall be driven via standard V-Belt Reducers or Gear Reducers, V-Belt Speed Reducers and Gear Reducers shall be completely enclosed to protect the pulleys, drive-belts, and gears. Fan motors shall be Totally Enclosed, (TEAC), reversible squirrel cage ball bearing type, and designed specifically for cooling tower service.

WET DECK SURFACE:

The wet deck surface shall be formed from polyvinyl chloride (PVC) and shall be impervious to rot, decay, and fungus or biological attacks and performance tested by the manufacturer to insure responsibility and quality control of the final product.


HOT WATER DISTRIBUTION SYSTEM:

The PVC hot water distribution system consisting of sprinkler arms and aluminum or stainless steel sprinkler head, as specified, to deliver incoming water by pump water pressure through a single water inlet connection ensuring even distribution over the wet deck surface.

COLD WATER BASINS AND ACCESSORIES:

The (FRP) cold water basin shall be watertight and include a brass float operated mechanical make-up valve. From the lip of the cold water basin to the bottom edge of the casing section shall be enclosed by a polyvinyl chloride (PVC) screen to prevent debris from entering the cold water basin and water splash out.

SCOPE OF WORK IF REQUIRED:

By owner/contractor... The cooling tower manufacturer shall be responsible for the design, fabrication, and delivery of materials to the work site, and for the erection of the tower on supporting piers or grilleage furnished by owner/contractor.

ACCESSORIES:

Listed in the Cooling Tower Systems catalog it includes all Stainless Steel components hardware vibration cut-out switches, variable speed drives, remote sump tanks, cold water basin heaters and controls, water pumps, and plate heat exchangers.

WARRANTY: (1) The manufacturers shall warrant the fiberglass basin and casings for ten (10) years. (2) (2) Wet Deck Polyvinyl Chloride (PVC) for two (2) years. (3) Fan Motor for one (1) year. (4) Extended Warranties are available upon request, for an additional fee.

Specifications (Continued)

Variable Speed Drive


MODEL # H.P. MOTOR VOLTAGE/PHASE SHIP WEIGHT LIST PRICE T-25 1/6 110/220-1 121 $1,257.00 T-28 1/6 110/220-1 128 $1,324.00 T-210 1/4 110/220-1 158 $1,656.00 T-215 1/4 110/220-1 174 $1,968.00 T-220 1/2 110/220-1 or 220/440-3 225 $2,769.00 T-225 3/4 220/440-3 262 $2,933.00 T-230 1 220/440-3 288 $3,397.00 T-240 1 1/2 220/440-3 404 $3,974.00 T-250 1 1/2 220/440-3 470 $4,442.00 T-260 1 1/2 220/440-3 549 $5,037.00 T-270 1 1/2 220/440-3 655 $5,910.00 T-280 2 220/440-3 687 $6,356.00 T-2100 3 220/440-3 997 $7,635.00 T-2125 3 220/440-3 1125 $9,680.00 T-2150 5 220/440-3 1475 $10,872.00 T-2175 5 220/440-3 1669 $13,447.00 T-2200 5 220/440-3 2014 $15,005.00 T-2225 7 1/2 208/230/460/3/60 T-2250 7 1/2 208/230/460/3/60 T-2300 10 208/230/460/3/60 T-2350 10 208/230/460/3/60 T-2400 15 208/230/460/3/60 T-2500 15 208/230/460/3/60 T-2600 20 208/230/460/3/60 T-2700 20 208/230/460/3/60 T-2800 30 208/230/460/3/60 T-3000 30 208/230/460/3/60

Please Contact the Sales Office for Pricing on Model

Towers T-2200 & Above

(1) PRICES ARE F.O.B. CLOSEST STOCKING WAREHOUSE. (2) a. T-25 THROUGH T-280 ARE ASSEMBLED TOWERS. b. T-2100 THROUGH T-2175 REQUIRE FIELD ASSEMBLY OR CAN BE ASSEMBLED IN SHOP, WITH IN-HOUSE ASSEMBLY CHARGE AND SHIPPED VIA WIDE LOAD FREIGHT PERMITS. CHECK WITH SALES OFFICE FOR MOST COST EFFECTIVE WAY FOR YOUR PARTICULAR INSTALLATION. c. T-2200 AND ABOVE REQUIRE FIELD ASSEMBLY. FACTORY FIELD ASSEMBLY IS AVAILABLE IF REQUIRED. CALL SALES OFFICE FOR THESE QUOTES. (3) MOTOR FREIGHT RATES: CLASS 150 WITH 35% DISCOUNT. (4) FAN MOTORS ARE AVAILABLE IN TRI-VOLTAGE 208/230/460/3. IF REQUIRED, AS WELL AS 50

CYCLE FAN MOTORS. CALL SALES OFFICE FOR INFORMATION. (5) MODEL T-2225 AND LARGER, PLEASE CONTACT SALES OFFICE FOR FORMAL QUOTATION.

Cooling Tower List Price


T MODEL (A) (B) (C) (D) (E) (F) (G) (H) (I) (J) TOTAL

T-25 $37 $77 $114 T-28 $37 $77 $114 T-210 $37 $77 $114 T-215 $37 $77 $114 T-220 $51 $108 $46 $205 T-200 $51 $108 $77 $236 T-230 $62 $108 $108 $278 T-240 $123 $108 $216 $185 $108 $740 T-250 $123 $108 $240 $185 $108 $764 T-260 $143 $277 $246 $185 $108 $959 T-270 $200 $277 $448 $231 $108 $393 $185 $1842 T-280 $200 $277 $510 $231 $108 $393 $185 $1904 T-2100 $246 $308 $770 $231 $154 $393 $185 $2287 T-2125 $246 $308 $953 $231 $154 $470 $185 $2549

(A) NUTS & BOLTS (B) MOTOR FRAME (C) FILLING SUPPORTER & COLUMN (D) LADDER C/W BRACKETS (E) FAN GUARD (F) SPRINKLER HEAD C/W TURNBUCKLE (G) CASING SUPPORTER T-270 TO T-2350 TRUSS PIPE B1 & B2 + BASE PLATE "B" (H) STIFFENER FRAME AND TRUSS PIPE ASSEMBLY (I) STIFFENER RING (J) BASIN SUPPORT

Stainless Steel Optional Add-On List Price

Accessory Items


T MODEL (A) (B) (C) (D) (E) (F) (G) (H) (I) (J) TOTAL

T-2150 $462 $1464 $1109 $262 $216 $470 $185 $1541 $5709 T-2175 $462 $1464 $1109 $262 $216 $470 $185 $1541 $5709 T-2200 $616 $1464 $1433 $308 $216 $624 $277 $1849 $6787 T-2225 $616 $1772 $1433 $308 $385 $624 $416 $1849 $7403 T-2250 $724 $1772 $1433 $308 $385 $624 $416 $1849 $7511 T-2300 $724 $1772 $2311 $385 $385 $955 $462 $2157 $770 $9921 T-2350 $724 $1772 $2465 $385 $385 $955 $462 $2311 $770 $10229 T-2400 $1695 $3389 $3004 $493 $462 $1232 $1386 $4776 $2465 $739 $19641 T-2500 $1695 $3389 $3235 $508 $462 $1633 $1464 $4930 $2619 $739 $20674 T-2600 $2464 $5392 $5546 $693 $539 $1633 $2157 $6470 $3235 $986 $29115 T-2700 $2464 $5392 $5546 $693 $539 $1633 $2157 $6470 $3235 $986 $29115 T-2800 $2773 $7394 $6316 $847 $616 $2342 $2311 $7086 $3697 $986 $34368 T-3000 $2773 $7394 $6316 $847 $616 $2342 $2311 $7086 $3697 $986 $34368

(A) NUTS & BOLTS (B) MOTOR FRAME (C) FILLING SUPPORTER & COLUMN (D) LADDER C/W BRACKETS (E) FAN GUARD (F) SPRINKLER HEAD C/W TURNBUCKLE (G) CASING SUPPORTER T-270 TO T-2350 TRUSS PIPE B1 & B2 + BASE PLATE "B" (H) STIFFENER FRAME AND TRUSS PIPE ASSEMBLY (I) STIFFENER RING (J) BASIN SUPPORT

Stainless Steel Optional Add-On List Price (Continued)

Accessory Item


TOWER MODEL #

TOWER PRICE

FAN MOTOR D/DRIVE

FAN MOTOR

V-BELT REDUCER

FAN ASS'Y

MOTOR FRAME ASSEMBLY

T-25LN $1849 $454 $227 $109 T-28LN $2125 $454 $227 $109 T-210LN $2411 $585 $320 $109 T-215LN $2939 $585 $320 $109 T-220LN $3430 $809 $544 $165 T-200LN $4066 $1141 $544 $165 T-230LN $4782 $1319 $907 $194 T-240LN $5892 $1319 $907 $194 T-250LN $6757 $1319 $907 $194 T-260LN $7501 $1618 $1008 $1167 $194 T-270LN $8940 $1618 $1008 $1167 $340 T-280LN $10651 $1785 $1090 $1167 $340 T-2100LN $13367 $1942 $1270 $1579 $1386 $423 T-2125LN $14482 $1942 $1273 $1579 $1386 $423

• Prices are F.O.B. Macon, GA

• Prices are for standard commercial tower specifications

• T-25LN through T-280LN cooling tower fan motor is direct drive

• T-2100LN tower through T-3000LN tower motor comes standard with a V-Belt Speed Reducer

Low Noise Cooling Tower List Price

Accessory Item

Tower Replacement Part’s List Price T-25 to T-230


PART # DESCRIPTION T-25 T-28 T-210 T-215 T-220 T-225 T-230 02-02 Outlet Nozzle $19 $19 $19 $24 $24 $29 $29 02-03 Inlet Nozzle 19 19 19 24 24 29 29 02-04 Over Flow Nozzle 14 14 14 14 14 14 14 02-05 Drain Nozzle 14 14 14 14 14 14 14 02-06 Automatic Filler Nozzle 14 14 14 14 14 14 14 02-07 Quick Filler Nozzle 14 14 14 14 14 14 14 02-08 Float Valve Assembly 40 40 40 40 40 40 40 02-09 Over Flow 6 6 6 6 6 6 6 02-10 Suction Strainer 16 16 16 24 24 24 24

02-12A Z Type Connector 8 8 8 8 8 8 8 02-16 Elbow 6 6 6 6 6 6 6 02-19 Inlet Pipe 11 11 11 14 14 21 21 03-00 Water Basin w/ Nozzle 237 237 289 350 486 507 596 04-00 Casing Supporter* 40 40 40 63 63 63 84

05-01A Casing* 237 284 284 434 434 576 662 05-06 Hand Hole Cover 6 6 6 6 6 6 6 06-01 Stand Pipe 19 19 19 24 24 35 35 06-04 Stand Pipe Base 16 16 16 21 21 29 29 07-01 Stopper 8 8 8 11 11 19 19 08-01 Filling Supporter - A* 8 8 8 8 29 29 37 11-00 Filling* 134 153 208 250 331 457 539 12-01 Sprinkler Head 37 37 37 48 48 63 63 13-01 Sprinkler Pipe Ass'y/Arm* 27 27 37 48 58 69 82 14-00 Motor Bracket & Fan Guard 56 56 74 74 92 92 92 16-01 Fan Motor NEMA 1 Speed 373 373 436 436 604 520 596 17-00 Fan Blade Assembly 92 92 119 119 137 137 137 18-01 Fan Guard*

20-01-A Inlet Louver (Std. Type)* 32 32 42 61 66 66 84 20-01-B Louver Bracket* - - 8 16 16 16 21 20-01-C Knob Pin* 3 3 3 3 3 3 6 Others Bolts/Nuts (SYS 304 Type)* 48 48 48 48 58 58 79

* SET PRICE

Tower Replacement Parts List Price T-240 to T-2125

PART # DESCRIPTION T-240 T-250 T-260 T-270 T-280 T-2100 T-2125 02-02 Outlet Nozzle $29 $53 $53 $92 $92 $105 $105 02-03 Inlet Nozzle 29 53 53 92 92 105 105 02-04 Over Flow Nozzle 14 14 14 14 14 14 19 02-05 Drain Nozzle 14 14 14 14 14 14 14 02-06 Automatic Filler Nozzle 14 14 14 14 14 14 14 02-07 Quick Filler Nozzle 14 14 14 14 14 14 14 02-08 Float Valve Assembly 63 63 63 87 87 87 87 02-09 Over Flow 6 6 6 6 6 6 14 02-10 Suction Strainer 24 29 29 35 35 35 35

02-12A Z Type Connector 27 27 27 27 27 27 27 02-16 Elbow 6 6 6 6 6 6 6 02-19 Inlet Pipe 27 40 40 53 53 61 84 03-01 Water Basin w/ Nozzle* 851 1211 1211 1449 1449 1665 1919 04-00 Casing Supporter* 121 121 121 161 161 161 161

05-01A Casing* 817 951 993 1520 1586 2150 2366 05-06 Hand Hole Cover 6 6 6 6 6 6 6 06-01 Stand Pipe 29 35 35 56 56 56 79 06-04 Stand Pipe Base 29 53 53 92 92 92 124 07-01 Stopper 19 24 24 37 37 37 - 07-02 Column - - - - - - 56 08-01 Filling Supporter* 61 71 71 179 203 239 276 10-01 Ladder A & B* 126 126 126 145 145 158 168

10-03-04 Ladder Bracket A & B* 14 14 14 14 14 14 14 11-00 Filling* 680 843 843 1056 1098 1641 2022 12-01 Sprinkler Head 63 74 74 205 205 205 231 12-02 Center Post - - - 8 8 8 8 12-03 Turnbuckle* - - - 21 21 21 21 12-04 Tension Wire* 6 6 6 6 8 8 8 13-01 Sprinkler Pipe Assembly* 108 145 145 174 174 224 273 14-00 Motor Bracket 113 113 137 137 153 182 182 16-01 Fan Motor NEMA 1 Speed 575 575 751 751 1137 1468 1468 17-00 Fan Blade Assembly 184 184 423 423 423 557 557 18-01 Fan Guard (SET)* 63 63 84 84 84 113 113

20-01-A Inlet Louver Supporter (SET)* 14 14 14 21 21 32 32 20-01-B Down Plug 14 14 14 21 21 32 32 20-01-C Up Plug 14 14 14 21 21 32 32 20-02 Inlet Louver (Std Type – SET)* 111 121 174 174 174 195 226 20-04 Louver Clip* 14 14 14 21 21 32 32 20-05 Louver Hook w/ Nut* 14 14 14 21 21 32 32 20-06 Lug Plate* 14 14 14 21 21 32 32 20-08 14 14 14 21 21 32 32 20-09 14 14 14 21 21 32 32 Others Bolts/Nuts (SYS 304 Type)* 124 124 137 218 218 260 260

* SET PRICE

Tower Replacement Parts List Price T-2150 to T-2350

PART # DESCRIPTION T-2150 T-2175 T-2200 T-2225 T-2250 T-2300 T-2350

01-02 Ring Frame* $242 $242 $300 $300 $300 $373 $410 01-05 Truss Pipe Assembly 378 378 476 476 476 581 623 02-01 Water Sump w/ Nozzle 489 489 520 520 686 686 686 02-08 Float Valve Assembly 87 87 105 105 105 105 105 02-09 Over Flow Nozzle 14 14 14 14 14 14 14 02-10 Suction Strainer 119 119 119 119 119 119 119

02-12A Connector Pipe 8 8 8 8 8 8 8 02-13 Elbow 16 16 16 16 16 16 16 02-16 Elbow 8 8 8 8 8 8 8 03-01 Water Basin* 1507 1507 2271 2271 2271 3024 3408 04-00 Casing Supporter* 161 189 189 189 189 224 244 04-02 Stiffner Ring* - - - - - 363 363

05-01A Casing* 2418 2654 3035 3035 3035 4925 5300 05-06 Hand Hole Cover 6 6 6 6 6 6 6 06-01 Stand Pipe 87 87 129 129 129 174 174 06-02 Stand Pipe Base 63 63 74 74 116 116 116 06-03 Packing 8 8 8 8 8 8 8 07-02 Column 69 69 100 100 100 111 111 08-01 Filling Support & Clamping Band* 281 281 397 397 397 659 659 10-01 Ladder A & B* 189 189 205 205 205 221 221 10-03 Ladder Bracket A & B* 14 14 21 21 21 21 21 11-01 Filling* 2140 2334 2723 2723 3500 3694 4379 12-01 Sprinkler Head 231 231 258 258 258 439 439 12-02 Center Post 8 8 8 8 8 19 19 12-03 Turnbuckle* 21 21 21 21 21 32 32 12-04 Tension Wire* 8 8 8 8 8 14 14 13-01 Sprinkler Pipe Assembly* 300 300 399 399 399 693 767 14-01 Motor Frame Pipe* 287 287 287 620 620 620 620 15-01 Motor Base 116 116 116 116 116 116 116 15-02 U-Bolt 32 32 32 32 32 32 32 16-01 Motor (Direct Drive) 3080 3080 3080 1255 1255 1552 1552 16-02 V-Belt Reducer 32 32 32 2501 2501 2860 2860 17-01 Fan Blade 819 819 819 1728 1728 1728 1728 18-01 Fan Guard* 147 147 147 405 405 405 405

20-01-A Louver Std. Type* 242 242 305 305 305 381 431 20-01-B Down Plug 32 32 32 32 32 32 32 20-01-C Up Plug 32 32 32 32 32 32 32 20-02 Inlet Louver (Std. Type – SET)* 242 242 305 305 305 381 381 20-04 Louver Clip* 32 32 32 32 32 53 53 20-05 Louver Hook w/ Nut* 32 32 32 32 32 53 53 20-06 Lug Plate* 32 32 32 32 32 53 53 20-08 Wing Bolt* 32 32 32 32 32 32 32 20-09 Plastic Washer(s)* 32 32 32 32 32 32 32 Others Bolts/Nuts (SYS 304 Type)* 452 452 588 588 588 738 738

* SET PRICE

Tower Replacement List Price for T-2400 to T-3000

PART # DESCRIPTION T-2400 T-2500 T-2600 T-2700 T-2800 T-3000 01-01 Base Plate - A $100 $100 $126 $126 $126 $126 01-02 Ring Frame (SET)* 945 1014 1213 1213 1350 1350 01-06 Tie Rod 82 82 82 82 82 82

02-01 to 07 Water Sump C/W Nozzle (SET)* 851 1027 1027 1027 2531 2531 02-08 Float Valve Assembly 137 137 137 137 137 137

02-09-01/02 Over Flow Nozzle (SET)* 56 56 56 56 56 56 02-10 Suction Strainer 137 137 137 137 137 137

02-12-A Connector 56 56 56 56 90 90 02-13 Elbow 24 24 24 24 24 24 03-01 Water Basin 4185 4358 7190 7190 10787 10787 04-01 Base Plate - B 100 100 126 126 126 126 04-02 Stiffener Ring* 945 1014 1213 1213 1350 1350

04-03-04 Truss Pipe Assembly (B1&B2) 552 594 777 777 861 861 05-01 Casing (Diffuser) 3783 4547 7952 7952 11388 11388 05-02 Casing (Cylinder) 1022 1077 1211 1344 1570 1570 05-03 Stiffener Ring 2 945 1014 1213 1213 1350 1350 05-04 Casing Stand 342 342 504 504 504 504 05-05 Inserted Bar 552 552 762 861 861 861 05-06 Hand Hole Cover 6 6 6 6 6 6 06-01 Stand Pipe 260 326 378 415 531 531 06-02 Stand Pipe Base 121 142 142 142 189 189 06-03 Packing 14 21 21 21 27 27 07-02 Column 126 126 268 268 326 326

08-01 to 06 Filling Supporter C/W Clamping Band (SET)* 951 951 1785 1785 1974 1974 10-01-02 Ladder A&B 268 268 294 294 326 326 10-03-04 Ladder Bracket A&B 27 27 27 27 27 27

11-01 to 08 Filling(s) (SET)* 5576 7014 7413 12645 13241 17850 12-01 Sprinkler Head 515 651 651 651 1082 1082 12-03 Turnbuckle 58 74 74 74 90 90 12-04 Tension Wire 14 21 21 21 27 27

13-01 to 03 Sprinkler Pipe Assembly (SET)* 720 1019 1586 1586 2610 2610 14-01 to 02 Motor Frame Assembly Pipe (SET)* 935 935 1176 1176 1481 1481

15-01 Motor Base 336 336 588 588 646 646 15-02 U-Bolt 63 63 63 63 63 63 16-01 Motor (NEMA 1 Speed) 1964 1964 2405 2405 4059 4059

16-02 to 05 V-Belt Reducer (SET)* 3933 3933 5363 5363 8045 8045 17-01 to 04 Fan Blade Assembly (SET)* 2334 2334 4473 4473 4867 4867

18-01 Fan Guard 567 567 659 659 770 770 19-00 Basin Supporter Assembly 476 476 612 612 612 612 20-01 Louver Supporter Assembly (SET)* 567 567 856 856 993 993

20-01-B Louver Supporter – B 121 121 168 168 168 168 20-02 Inlet Louver (SET)* 410 494 617 617 749 749 20-08 Bolt CW Plastic Washer 121 121 168 168 168 168 20-09 Plastic Washer(s) 121 121 168 168 168 168 Other Bolt & Nuts (SUS 304 Type) 1536 1536 2253 2253 2455 2455

(SET)* - Sold as Set Price


TYPE: Three Phase X 60HZ X Single Speed

METRIC TYPE NEMA TYPE TOWER MODEL # MOTOR SPEC (HP X POLE) FRAME # PRICE FRAME # PRICE

T-25 thru T-28 1/6 X 6 63 $373 80M T-210 thru T-215 1/4 X 6 71 436 80M

T-220 1/2 X 6 80 604 80M $604 T-225 3/4 X 6 90L 520 143TC 665 T-230 1 X 6 90L 596 145TC 784

T-240 thru T-250 1.5 X 6 100L 575 182TC 856 T-260 thru T-270 1.5 X 6 100L 751 182TC 1032

T-280 2 X 8 112M 1163 213TC 1512 T-2100 thru T-2125 3 X 8 132S 1468 215TC 2031

T-2150 - T-2200 5 X 10 (Direct Drive) 132S 3080 254TC 4018 T-2225 thru T-2250 5 x 10 132S 1255 213TC 1255 T-2300 thru T-2350 10 X 4 132M 1552 215TC 1552 T-2400 thru T-2500 15 X 4 160M 1964 254TC 1964 T-2600 thru T-2700 20 X 4 160L 2405 256TC 2405 T-2800 thru T-3000 30 X 4 180L 4059 286TC 4059

1. Metric Type Motor (IEC Standard) - Three Phase X 60HZ X 220/440 Volt X E Class Insulation A. 1/6HP X 6P to 7.5HP X 4P - Totally Enclosed Non-Ventilation Type (TENV). B. 5 HP x 10 – Totally Enclosed Fan Cooled (TEFC) C. 10 HP X 4P to 40HP X 4P - Totally Enclosed Fan Cooled Type (TEFC).

2. NEMA Type Motor (NEMA Standard) - 3 Phase X 60HZ X 208/230/460 Volt X B Class Insulation A. 1/2HP X 6P to 3HP X 8P - Totally Enclosed Non-Ventilation Type (TENV). B. 5HP X 10P to 40HP X 4P - Totally Enclosed Fan Cooled Type (TEFC).

Fan Motor List Pricing

Sump Heater w/ Control Panel

Accessory Item

V-Belt Speed Reducer Replacement Parts List Price

www.coolingtowersystems.com -

TOWER # T-2225 T-2350

T-2300 T-2350

T-2400 T-2500

T-2600 T-2700

T-2800 T-3000 PARTS # DESCRIPTION

MODEL# LBM 055C LBM 075 LBM 110 LBM 150 LBM 220

6 PULLEY #1 $79.00 $79.00 $158.00 $126.00 $205.00 7 CLIP 3 3 6 11 11 8 BELT CASE 510 557 709 972 1187 9 CLIP 3 3 6 11 11

10 PULLEY #4 0 210 279 557 893 11 HOUSING COVER #1 27 27 53 79 105 12 BEARING "D" 90 90 153 378 783 18 CLIP 3 3 6 11 11 19 PULLEY #2 126 126 205 252 504 21 BEARING "B" 40 53 53 58 153 22 INTERMEDIATE SHAFT 158 179 205 331 457 23 BEARING "C" 111 142 142 305 630 24 PULLEY #3 105 105 126 179 378 25 CLIP 3 3 6 11 11 26 V-BELT/SET 279 389 347 483 756 27 HOUSING 305 305 630 630 756

28 & 31 FAN SHAFT & KEY 305 305 504 630 756 29 BEARING "E" 100 100 153 357 431 30 USING COVER 40 40 53 63 79

32 ADJUSTING DEVICE ASS'Y 126 153 205 252 252

37 THRUST "B" 95 95 105 132 163 38 SEAL/SET 21 21 27 40 40

r

Accessory Item

Fan Moto

15 - Over 40 Years of Manufacturing Experience


MODEL # REDUCER MODEL # SPEC. # QUANTITY LIST PRICE EACH LIST PRICE SET T-2225 LBM-055C 2-11Ms-800 1 PC 111 279 T-2250 3-11Ms-800 1 PC 168

T-2300 LBM-075 2-11Ms-800 2 PC 111 389 T-2350 3-11Ms-800 1 PC 168

T-2400 LBM-110 2-11Ms-1400 1 PC 137 347 T-2500 3-11Ms-1400 1 PC 210

T-2600 LBM-150 2-11Ms-1400 2 PC 137 483 T-2700 3-11Ms-1400 1 PC 210

T-2800 LBM-220 2-11Ms-1550 2 PC 153 756 T-3000 3-11Ms-1550 2 PC 226

• The Manufacturer recommends when replacing V-Belts the complete set be replaced to eliminate premature wearing. For optimal V-Belt usage, be sure that the match set numbers are within five (5) match points.

TOWER MODEL # GEAR MODEL # GEAR RATIO

W/O MOTOR

W/ MOTOR 1 SPEED W/ MOTOR 2 SPEED

T-2225 EF-80 4.45:1 4,225 5,314 5,715 T-2250 EF-80 4.45:1 4,225 5,314 5,715

T-2300 EF-100 4.43:1 4,578 5,917 6,395 T-2350 EF-100 4.43:1 4,578 5,917 6,395

T-2400 ZF-80 5.02:1 6,514 8,227 7,030 T-2500 ZF-80 5.02:1 6,514 8,227 7,030

T-2600 ZF-100 6.08:1 8,451 10,538 12,669 T-2700 ZF-100 6.08:1 8,451 10,538 12,669

T-2800 ZF-120 6.02:1 9,683 13,212 14,490 T-3000 ZF-120 6.02:1 9,683 13,212 14,490

1. To meet available "Pinion size on Gear Reducer" the shaft dimension on the Fan Motor is specially designed.

2. To meet available flange size on Fan Motor the Gear Reducer will have an "Adaptor" on the top. 3. To meet Motor Mounting Frame and Fan Hub size on cooling tower the Gear Reducer will have an

"Adaptor" on the top. 4. Gears are manufactured by "Flender Himmelwerk & Co. KG" in Germany.

V-Belt List Price

Gear Reducer Price List

Anti-Splash Louver List Price


MODEL # # OF UNITS WIDTH OF UNITS LENGTH OF BLADE LIST PRICE T-25 3 35 8 $195.00 T-28 3 35 8 195 T-210 3 44 8 238 T-215 3 48 12 296

T-220 3 57 12 346 T-225 3 57 12 346 T-230 4 49 12 415 T-240 4 54 13 470 T-250 4 61 13 558

T-260 4 61 15 558 T-270 6 45 18.25 646 T-280 6 45 18.25 646 T-2100 6 55 18.25 773 T-2125 6 63 18.25 882

T-2150 6 66 20.25 978 T-2175 6 66 20.25 978 T-2200 8 58 20.25 1092 T-2225 8 58 28 1297 T-2250 8 58 28 1297

T-2300 8 69 28 1588 T-2350 8 74 28 1710 T-2400 12 53 32 2257 T-2500 12 58 32 2431

T-2600 - T-2700 16 51 37 3131 T-2800 - T-3000 16 59 43 3908


TOWER MODEL # W/ HDGS SUPPORTER W/ SUS SUPPORTER T-220 & T-225 $263.00 $315.00

T-230 315 368 T-240 420 473 T-250 473 525 T-260 525 578

T-270 & T-280 578 630 T-2100 630 683 T-2125 840 945

T-2150 & T-2175 945 1050 T-2200 & T-2250 1470 1680

• For sizes T-2300 and above call for formal quotation.

Extension Skirt List Price

Sprinkler Head


PART # CAPACITY (GAL.) DIAMETER (IN.) HEIGHT (IN.) LIST PRICE RST-65 65 23 38 $358.00 RST-120 120 38 29 $548.00 RST-165 165 31 55 $672.00 RST-300 300 36 78 $999.00 RST-500 500 48 72 $1357.00 RST-550 550 67 42 $1212.00 RST-750 750 46 112 $1877.00 RST-1000 1000 64 79 $1991.00 RST-1100 1100 87 51 $1763.00 RST-1300 1300 87 58 $2013.00 RST-1500 1500 64 115 $3183.00 RST-1700 1700 87 72 $2364.00 RST-2100 2100 95 89 $3098.00 RST-2500 2500 95 89 $3942.00 RST-3000 3000 95 107 $5028.00

NOTE:

THE LIST PRICING ABOVE INCLUDES DRAIN FITTING ONLY. FOR 1" BULKHEAD FITTING - LIST PRICE $40.00; 2" BULKHEAD FITTING - LIST PRICE $55.00; 3" BULKHEAD FITTING - LIST PRICE $105.00. FOR FITTINGS OVER 4", CONTACT CTS FOR PRICING.

BULKHEAD FITTING CAN BE INSTALLED FOR A NET COST OF $15.00/EACH.

Vertical Remote Sump Tanks List Price

Water Pump

CTS

Accessory Item


Vertical storage tanks are most frequently used for nursing mobile application equipment

and bulk storage. Common uses are for fertilizer solutions, ag chemicals, plant foods,

liquid feeds and water.

Features include tie-down slots, built-in graduation gallon-count indicators, siphon tube, offset fill-well and self-vented, slosh-

proof lids.

Gallon Capacity

Diameter (IN.)

Height (IN.)

Fill Opening

(IN.) Drain (IN.)

Premium Weight -White- Item No.

Premium Weight

Tank Availability

Location

Heavy Weight -Blue-

Item No.

Heavy Weight Tank

Availability Location

65 23 38 8 1 1/4 60213 A - - 165 31 55 16 2 40281 A - - 300 35 78 16 2 40213 A - - 305 46 48 16 2 40302 A - - 500 48 71 16 2 40148 B, C, D, E - - 500 46 78 16 2 40304 F 40306 F 550 67 42 16 2 40023 A - - 750 46 112 16 2 40308 F - - 1000 64 79 16 2 40152 A 40154 F 1100 87 51 16 2 40070 A 40081 C, F 1300 87 58 16 2 40035 B, C 40036 B 1500 64 115 16 2 40144 A 40146 B 1550 87 65 16 2 40235 A 40236 - 1610 100 56 16 2 40199 C - - 1700 87 70 16 2 40010 A 40012 - 2100 87 87 16 2 40178 A 40241 - 2500 95 89 16 2 40051 A 40052 - 3000 95 105 16 3/2 40063 A 40065 - 4000 95 140 16 3/2 40076 B 40117 - 4000 102 125 16 3/2 40312 C, D, E, F 40314 - 5000 102 151 16 3/2 40164 A 40166 - 5800 141 97 16 3/2 40071 C - - 6000 102 182 16 3/2 40226 A 40233 - 6500 120 147 16 3/2 40224 A 40232 - 7000 141 117 16 3/2 40347 F 40349 - 9000 141 144 16 3/2 - - 40231 A

10,000 141 159 16 3/2 - - 40353 A 12,000 144 185 16 3/2 - - - A

*NOTE: For drawings to indicate fitting location, contact Sales Office

Vertical Storage Tanks


TABLE 1: Single phase heater with built-in load carrying 0-100° F thermostats. Single Phase Amperage

Tower Model No. Heater Catalog No. Watts 120V 208V 240V List Price* T-25, T-28 712U221312 750 6.3 3.6 3.2 $576.14

T-210, T-215 712U241312 1500 12.5 7.2 6.3 580.10 T-220, T-230 712U251312 2000 16.7 9.6 8.4 580.10

T-240 712U441312 3000 25.0 14.5 12.5 619.62 T-250, T-260 713U191312 4000 N/A 19.2 16.7 684.19 T-270, T-280 713U581312 5000 N/A 24.0 20.8 711.86

T-2100 713U211312 6000 N/A 28.9 25.0 738.21 *Add $159.30 to all heaters for double pole thermostats. Prices above are for single pole, single throw only.

TABLE 2: Single phase heaters, no thermostats, for use with control panel option. Single Phase Amperage

Tower Model No. Heater Catalog No. Watts 120V 208V 240V List Price* T-25, T-28 712U121300 750 6.3 3.6 3.2 $289.88

T-210, T-215 712U141300 1500 12.5 7.2 6.3 293.84 T-220, T-230 712U151300 2000 16.7 9.6 8.4 293.84

T-240 712U341300 3000 25.0 14.5 12.5 333.36 T-250, T-260 713U271300 4000 N/A 19.2 16.7 351.81

" T713U111300 4000 N/A N/A 16.7 351.81 T-270, T-280 713U521300 5000 N/A 24.0 20.8 379.48

" T713U121300 5000 N/A N/A 20.8 379.48 T-2100 713U311300 6000 N/A 28.9 25.0 405.84

" T713U131300 6000 N/A N/A 25.0 405.84

TABLE 3: Three phase heaters, no thermostats, for use with control panel option. Single Phase Amperage

Tower Model No. Heater Catalog No. Watts 120V 208V 240V List Price* T-240 T713U141300 3000 8.3 7.2 3.6 376.85

T-250, T-260 T713U151300 4000 11.1 9.6 4.8 386.07 T-270, T-280 T713U171300 5000 13.9 12.0 6.0 400.56

T-2100 T713U201300 6000 16.7 14.5 7.2 412.42 T-2125 TO T-2175 T713U291300 9000 25.0 21.7 10.8 440.10

Heater Control Panel: Order catalog number 874U-100000. Panel is NEMA 4 with pre-mounted electrical hubs for conduit connection, combination temperature and low water cutoff controller, probe and weatherproof connector, contactor, and control power transformer. UL labeled and listed. Panel rating is 40 amps. List Price $1,112.10

*OPTIONS: For larger towers, higher ratings, multiple circuits, disconnects, fusing, circuit breakers... Contact Factory

Winterization Heaters & Heater Control Panels


Cooling Tower Applications Cooling tower operation is often required in freezing weather for either comfort air conditioning in the central core of a large building, or for industrial processes. To protect the cooling tower from freezing during shutdown periods, Cooling Tower Systems has developed a full line of winterizing heaters. Those shown in this section are used when heat distribution is required over a long length, or when an over-the-side construction is required, as in ceramic, concrete or fiberglass basin. 2" pipe thread heaters, with copper tubular elements are commonly used in the sump when full-length distribution is required. Alternately, to protect both the tower and its piping, the water may be pumped through an Instantaneous Heater. Construction

Two Constructions are available:

Pipe Thread Heaters are furnished with a Scru-Tite hub, which has a

built-n O-ring and locknut to make a pressure-tight joint through a hole in

metal basin walls. The heater is screwed into this hub in the field.

Over-the-Side Heaters eliminate the necessity for cutting a hole in a metal basin and are desirable for installations in non-metal basins. Internal wiring runs from the horizontal heater elements through a vertical riser and extension arm with an outlet box located over the side of the basin. Adjustable Sludge Legs are furnished on all heaters. They are located on five foot centers to keep the element in place even in high water velocities. The legs are adjustable for heights between 2" and 3-1/2"; longer legs are available on special order.

Elements - Both constructions utilize an 80/20 nickel/chromium resistance coil strung through cylindrical ceramic cores. This assembly is slipped into a Type 304 Stainless Steel sheath. All voids are filled with magnesium oxide.

Elements are available in two sizes: Series 761 hearts have 3/4" diameter elements for single phase operation up through 480 volts, and are most commonly used. Series 762 heaters have 1 1/4" diameter elements for both single and three phase operation, up through 480 volts, and in higher KW ratings (up to 20 KW). Consult our office for specific wattage limitations at various voltages.

Element lengths up to 240" are listed in the accompanying table and are available from stocked tubing. Lengths up to 360" are available on special order.

Liquidproof/Explosion-Resistant Outlet Boxes are furnished on all heaters.

Controls Thermostats and low water cutoffs are stocked and available as individual components or mounted and pre-wired into NEMA 4 control Panel-boards. Accessories for controls are designed for mounting through a basin wall. Consult factory for pricing.

Thermostats, required to energize the heater as the water temperature reaches the freezing point, are bulb and capillary devices with a 35° to 110° F range and a fixed 3° F differential. Each thermostat is furnished with a stainless steel well to house and permanently locate the bulb. The well is installed through a Scru-Tite hub, also furnished, which should be at the same level as the heater.

Heaters

Heater’s Continued


The thermostat is normally housed in a NEMA 4 weatherproof enclosure, which can be located up to 3 feet away from the well. For indoor or protected installations, the thermostat is available in a NEMA 1 sheet metal enclosure. In most instances, the heater load can be carried directly by the thermostat, which has the following non-inductive single phase ratings: 3000 Watts at 120 Volts 4575 Watts at 208 Volts 5280 Watts at 240 Volts 4985 Watts at 277 Volts Three phase heaters, 480 volt heaters, and those with ratings exceeding the above require a magnetic contactor. See Bulletin C81-2.

Low Water Cutoff - If the heater is operated when it is not completely covered with water, irreparable damage may result. The low water cutoff prevents such damage. It consists of two components: A Type 316 Stainless Steel probe, installed at least 2" above the element heating; and a relay to deenergize the heater when the water level drops below the probe. A weatherproof cord connects the probe and relay. The relay is capable of carrying heater loads up to 20 amps at 110 volts and 16 amps at 220 volts, single phase. Above this capacity, a magnetic contactor is required.

NEMA 4x Panel Board - Dimensions 6" x 12" x 10". Designed for cooling tower applications. Built in: 0 to 100°F thermostat calibrated for freeze protection. Low water cutoff - floatless type with low voltage probe. 3 pole contactor rated 40 amps. Accessories for mounting sensors through basin with 2" NPT pip plug specify power voltage 120, 280, 240 or 480. Stock item available for quick delivery.

UL Listing - Both Pipe Thread and Over-the-Side constructions are listed by the Underwriters' Laboratories under Reference E23541 in lengths through 240" and ratings through 40 amps (24 amps at 480 volts, 3 phase). This broad UL listing insures both the purchaser and electrical inspector of safe operation with a wide variety of operating characteristics.

How To Order Specify: 1. Catalog Series Series 761 for 3/4" diameter. (Single phase only) Series 762 for 11/4" diameter. (Single or three phase) 2. Element Length See listings. Consult factory for lengths over 240". 3. Type of Construction Pipe Thread or Over-the- Side. For over-the-side construction, specify riser height (C-Dimension).

4. Sludge Leg Height If legs must be higher than 3 1/2". 5. Voltage 120, 208, 240, 277 and 480 volts are standard. Specify "Special Voltage" if required (no extra charge). 6. KW Rating Consult your local representative for advice on KW rating required to prevent freeze up. Most KW ratings available in length and diameter required. 7. Thermostat Catalog No. 230-12WCL for NEMA 4 enclosure; Catalog No. 230-12WC for NEMA 1 enclosure. Well and Scru- Tite hub automatically furnished. 8. Low Water Cutoff Catalog No. B-1480 includes relay in NEMA 4 enclosure, Probe, Scru-Tite hub, bushing, cord and connector. Control voltage will be the same as heater voltage except in the following cases where you must specify control voltage. If heater: (1) draws more than 20 amps at 110 volts or 16 amps at 220 volts, or (2) is three phase. 9. Flange for Mounting Low Water Cutoff and Thermostat Well Through Wooden Tower Standard CTS cooling tower heaters are built with Scru- Tite hubs for mounting through a metal basin. If it is necessary to mount the heater through a basin wall that is other than metal, e.g., wood, heaters can be furnished with flanges for low water cutoff and thermostat well.


MODEL CTS NO. OF MT. PTS ISOLATION TYPE LIST PRICE

T-25 3 SLRB-150 $695.30 T-28 3 SLRB-150 695.30 T-210 3 SLRB-280 695.30 T-215 3 SLRB-280 695.30 T-220 3 SLRB-280 695.30 T-225 3 SLRB-280 695.30 T-230 4 SLRB-280 927.00 T-240 4 SLRB-450 927.00 T-250 4 SLRB-450 927.00 T-260 4 SLRB-450 927.00 T-270 5 SLRB-450 1158.80 T-280 5 SLRB-450 1158.80 T-2100 5 SLRB-750 1158.80 T-2125 5 SLRB-750 1158.80 T-2150 5 SLR-1-1350 1158.80 T-2175 5 SLR-1-1350 1158.80 T-2200 4 SLR-1-2100 980.60 T-2225 4 SLR-1-2100 980.60 T-2250 4 SLR-1-2100 980.60 T-2300 4 SLR-1-2650 1174.20 T-2350 4 SLR-1-2650 1174.20 T-2400 6 SLR-1-2650 1761.30 T-2500 6 SLR-1-2650 1761.30 T-2600 8 SLR-1-2935 2513.20 T-2700 8 SLR-1-2935 2513.20 T-2800 8 SLR-1-3500 2842.80 T-3000 8 SLR-1-3500 2842.80

SLR - RESTRAINED SPRING MOUNTS SLR Restrained Spring Mounts provide control of structurally transmitted noise and vibration, with limited movement. Equipment is restrained in all directions, therefore, reducing damage caused by conditions that would otherwise move equipment excessively. SLR Restrained Spring Mounts are ideal for protecting connections to Cooling Towers where weight can change with fluid fluctuations that cause the units to move vertically. They also meet or exceed most building code requirements where earthquakes and high wind load conditions are experienced.

Vibration Isolation Mounts List Price

Vibration Isolator


Cooling Tower Systems ships FOB from closest available warehouse. This includes full assembly of cooling towers T-25 through T-280 models. Models T-2100 and larger require field assembly due to size and shipping costs.

We at Cooling Tower Systems have field engineers available for field assembly for any location in North America. For further information on your special field assembly requirements and prices, call our convenient toll free number and ask a sales representative for details.

Cooling Tower Systems has had numerous inquiries from our wholesale customers regarding the assembly time required for field assembly of our cooling towers. The following table has been compiled to assist our customers and should be used as a guide only.

Model Number Men required Hours per Man T-25 to T-215 1 1

T-220 TO T-225 1 1.5 T-230 1 1.5 T-240 2 2 T-250 2 2 T-260 2 2 T-270 2 4 T-280 2 4

T-2100 to T-2125 3 5 T-2150 to T-2175 3 7 T-2200 to T-2250 4 8 T-2300 to T-2350 4 12 T-2400 to T-2500 5 18 T-2600 to T-2700 5 24 T-2800 to T-3000 5 40

NOTE: (1) MODELS T-25 THROUGH T-280 SHIPPED ASSEMBLED AND ASSEMBLY PRICE IS INCLUDED IN TOWER PRICE. (2) MODELS T-2100 THROUGH T-2175 CAN BE FACTORY ASSEMBLY AND SHIPPED WITH OVERWIDTH PERMITS. CALL SALES OFFICE FOR ASSEMBLY AND SHIPPING COSTS.

Man Hours – Assembly Table

Winterization Kit

Accessory Item


T-25 thru T-230 Cut Sheet


QTY

REF. NUMBER DESCRIPTION T 25-28

T 210

T 215-220

T 225

T 230

02-02 Outlet Nozzle 1 1 1 1 1

02-03 Inlet Nozzle 1 1 1 1 1

02-04 Over Flow Nozzle 1 1 1 1 1

02-05 Drain Nozzle 1 1 1 1 1

02-06 Automatic Filler Nozzle 1 1 1 1 1

02-07 Quick Filler Nozzle 1 1 1 1 1

02-08 Float Valve Assembly 1 1 1 1 1

02-09 Over Flow 1 1 1 1 1

02-10 Suction Strainer 1 1 1 1 1

02-12A Z Type Connector 1 1 1 1 1

02-16 Elbow 1 1 1 1 1

02-19 Inlet Pipe 1 1 1 1 1

03-00 Water Basin 1 1 1 1 1

04-00 Casing Supporter 3 3 3 3 4

05-01A Casing 3 3 3 3 4

05-06 Hand Hole Cover 1 1 1 1 1

06-01 Stand Pipe 1 1 1 1 1

06-04 Stand Pipe Base 1 1 1 1 1

07-01 Stopper 1 1 1 1 1

08-01 Filling Supporter - A 3 3 3 3 4

11-00 Filling 2 2 2 2 2

12-01 Sprinkler Head 1 1 1 1 1

13-01 Sprinkler Pipe 4 4 4 4 4

13-02 End Cap - - - 4 4

13-03 Eliminator - - - - 4

13-04 Lock Nut 4 4 4 4 4

14-00 Motor Frame Assembly 1 1 1 1 1

16-01 Fan Motor 1 1 1 1 1

16-03 Fan Key 1 1 1 1 1

16-04 Fasten Nut 1 1 1 1 1

17-00 Fan Assembly 1 1 1 1 1

18-01 Fan Guard 1 1 1 1 1

20-02 Inlet Louver 3 3 3 3 4 20-10 Louver Bracket - 3 6 6 8

20-11 Knob Pin 6 6 6 6 8

OTHERS BOLTS & NUTS 1 SET

*Please check the above mentioned parts within two weeks after the goods are received.

T-25 thru T-230 Parts Table




QTY QTY REF. NUMBER DESCRIPTION T

240 T

250 T

260

REF. NUMBER DESCRIPTION T

240 T

250 T

260 02-01 Water Sump - - - 10-03 Ladder Bracket - A 2 2 2 02-02 Outlet Nozzle 1 1 1 10-04 Ladder Bracket - B 2 2 2 02-03 Inlet Nozzle 1 1 1 11-00 Filling 2 2 2 02-04 Over Flow Nozzle 1 1 1 12-01 Sprinkler Head 1 1 1 02-05 Drain Nozzle 1 1 1 12-04 Tension Wire 2 2 2 02-06 Automatic Filler Nozzle 1 1 1 13-01 Sprinkler Pipe 4 4 4 02-07 Quick Filler Nozzle 1 1 1 13-02 End Cap 4 4 4 02-08 Float Valve Assembly 1 1 1 13-03 Eliminator 4 4 4 02-09 Over Flow 1 1 1 13-04 Lock Nut 4 4 4 02-10 Suction Strainer 1 1 1 14-00 Motor Frame Assembly 1 1 1 02-12A Z Type Connector 1 1 1 16-01 Fan Motor 1 1 1 02-16 Elbow 1 1 1 16-03 Fan Key 1 1 1 02-19 Inlet Pipe 1 1 1 16-04 Fasten Nut 1 1 1 03-00 Water Basin 1 1 1 17-00 Fan Assembly 1 1 - 04-00 Casing Supporter 4 4 4 17-01 Fan Hub - - 1 05-01A Casing 4 4 4 17-02 Fan Blade - - 3 05-06 Hand Hole Cover 1 1 1 17-04 U-Bolt - - 6 06-01 Stand Pipe 1 1 1 18-01 Fan Guard 2 2 2 06-04 Stand Pipe Base 1 1 1 20-01-A Louver Supporters 8 8 8 07-01 Stopper 2 2 2 20-01-B Down Plug 8 8 8 08-01 Filling Supporter - A 4 4 4 20-01-C Up Plug 8 8 8 08-02 Filling Supporter - C 4 4 4 20-02 Inlet Louvers-Std. Type 8 8 8 10-00 Ladder 4 4 4 20-08 Wing Bolt 16 16 16 10-03 Ladder 1 1 1 20-09 Plastic Washers 16 16 16

OTHERS BOLTS & NUTS 1 SET Water Basin Sealing Material

A Fiberglass 1 Set B Polyester Resin 1 Keg C Catalyst 1 Bottle






QTY QTY REF.

NUMBER DESCRIPTION T

270-280 T

2100 T

2125


270-280 T

2100 T

2125 02-01 Water Sump 1 1 1 08-04 Fill Supt. Clamping Band 12 12 12 02-02 Outlet Nozzle 1 1 1 10-01 Ladder (A Section) 1 1 1

02-03 Inlet Nozzle 1 1 1 10-02 Ladder (B Section) 1 1 1

02-04 Over Flow Nozzle 1 1 1 10-03 Ladder Bracket - A 2 2 2

02-05 Drain Nozzle 1 1 1 10-04 Ladder Bracket - B 2 2 2

02-06 Automatic Filler Nozzle 1 1 1 11-02 Filling 1/2 Section 4 - - 02-07 Quick Filler Nozzle 1 1 1 11-03 Filling 1-3 Section - 6 6

02-08 Float Valve Assembly 1 1 1 12-01 to 12-04 Sprinkler Head Assemb. 1 1 1

02-09 Over Flow 1 1 1 13-01 to 03 Sprinkler Pipe Assemb. 4 4 4

02-10 Suction Strainer 1 1 1 14-00 Motor Frame Assemb. 1 1 1

02-12A Z Type Connector 1 1 1 16-01 Fan Motor 1 1 1

02-16 Elbow 1 1 1 16-03 Fan Key 1 1 1

02-19 Inlet Pipe 1 1 1 16-04 Fasten Nut 1 1 1

03-01 Water Basin 5 5 5 17-01 Fan Hub 1 1 1

04-00 Casing Supporter 6 6 6 17-02 Fan Blade 4 4 4

05-01A Casing 4 6 6 17-04 U-Bolt 6 8 8

05-06 Hand Hole Cover 1 1 1 18-01 Fan Guard 2 2 2

06-01 Stand Pipe 1 1 1 20-01-A Louver Supporters 8 12 12 06-04 Stand Pipe Base 1 1 1 20-01-B Down Plug 8 12 12 07-01 Stopper 2 2 - 20-01-C Up Plug 8 12 12 07-02 Column - - 2 20-02 Inlet Louvers-Std. 8 12 12 08-01 Filling Supporter - A 6 6 6 20-08 Wing Bolts 16 24 24 08-02 Filling Supporter - B 6 6 6 20-09 Plastic Washers 16 24 24 08-03 Filling Supporter - C 6 12 12 Others Bolts & Nuts 1 Set

Water Basin Sealing Material A Fiberglass 1 Set

B Polyester Resin 1 Keg

C Catalyst 1 Bottle






T-2200 Cut Sheet




QTY QTY REF.

NUMBER DESCRIPTION T 2150 2175

T 2200

T 2225 2250

T 2300

T 2350


2150 2175

T 2200

T 2225 2250

T 2300

T 2350

01-02 Ring Frame - 8 8 8 8 11-04 Filling (1/4 Section) 8 8 8 - - 01-05 Truss Pipe Assembly - 4 4 4 4 11-06 Filling (1/6 Section) - - - 12 12

02-01 Water Sump 1 1 1 1 1 12-01 Sprinkler Head 1 1 1 1 1

02-02 Outlet Nozzle 1 1 1 1 1 12-02 Center Post 1 1 1 1 1

02-03 Inlet Nozzle 1 1 1 1 1 12-03 Turnbuckle 4 4 4 6 6

02-04 Over Flow Nozzle 1 1 1 1 1 12-04 Tension Wire 4 4 4 6 6

02-05 Drain Nozzle 1 1 1 1 1 13-01 Sprinkler Pipe 4 4 4 6 6

02-06 Automatic Filler Nozzle 1 1 1 1 1 13-02 End Cap 4 4 4 6 6

02-07 Quick Filler Nozzle 1 1 1 1 1 13-03 Eliminator 4 4 4 6 6

02-08 Float Valve Assembly 1 1 1 1 1 14-01 Frame Ass'y Main Pipe 2 2 2 2 2

02-09 Over Flow 1 1 1 1 1 14-02 Frame Ass'y Main Pipe - - 2 2 2

02-10 Suction Strainer 1 1 1 1 1 15-01 Motor Base 1 1 1 1 1

02-12A Connector Pipe 1 1 1 1 1 15-02 U-Bolt - - 8 8 8

02-13 Elbow 2 - - - - 16-01 Motor 1 1 1 1 1

02-16 Elbow 1 1 1 1 1 16-02 Speed Reducer 1 1 1 1 1

03-01 Water Basin 5 8 8 8 8 16-03 Fan Key 1 1 1 1 1

04-00 Casing Supporter 6 8 8 8 8 16-04 Fasten Nut 1 1 1 1 1

04-02 Stiffener Ring - 1 - - - 8 8 16-05 Lock Nut - - 1 1 1

05-01A Casing Diffuser 6 - 8 8 8 17-01 Fan Hub 1 1 1 1 1

05-02 Casing Cylinder 8 - - - - 05-06 Hand Hole Cover 1 1 1 1 1 17-02 Fan Blade 4 4 4 4 4

06-01 Stand Pipe 1 1 1 1 1 17-04 U-Bolt 8 8 8 8 8

06-02 Stand Pipe Base - 1 1 1 1 18-01 Fan Guard 2 2 2 2 2

06-03 Packing - 1 1 1 1 20-01-A Louver Supporters 12 16 16 16 16 07-02 Column 2 2 1 1 1 20-01-B Down Plug 12 16 16 16 16 08-01 Filling Supporter - A 6 8 8 8 8 20-01-C Up Plug 12 16 16 16 16 08-02 Filling Supporter - B 6 8 8 8 8 20-01-D Up Plugs - - - 16 16 08-03 Filling Supporter - C 12 16 16 16 16 20-02 Inlet Louvers -Std. Type 12 16 16 16 16 08-04 Fill Supt. Clamping Band 12 16 16 16 16 20-08 Wing Bolts 24 32 48 48 48 10-01 Ladder (A Section) 1 1 1 1 1 20-09 Plastic Washers 24 32 48 48 48 10-02 Ladder (B Section) 1 1 1 1 1 25-01 Tie Retainers - 4 4 4 4 10-03 Ladder Bracket - A 2 2 2 2 2 25-02 Tie Retainers - 4 4 4 4 10-04 Ladder Bracket - B 2 2 2 2 2 26-01 Turn Buckles - 4 4 4 4 11-01 Filling (Inner Section) - - - 2 2 Others Bolts & Nuts 1 Set

Water Basin Sealing Material

A Fiberglass 1 Set

B Polyester Resin 1 Keg

C Catalyst 1 Bottle






QTY QTY

NUMBER DESCRIPTION T 2400

T 2500

T 2600 2700

T 2800 3000


2400 T

2500

T 2600 2700

T 2800 3000

01-01 Base Plate - A 6 6 8 8 10-01-1 Ladder (A Section - 1) 1 1 1 1 01-02 Ring Frame 6 6 8 8 10-01-2 Ladder (A Section - 2) - - 1 1 01-03 Truss Pipe - A1 6 6 8 8 10-02 Ladder (B Section) 1 1 1 1 01-04 Truss Pipe - A2 6 6 8 8 10-03 Ladder Bracket - A 2 2 2 2 01-06 Tie Rod 6 6 8 8 10-04 Ladder Bracket - B 2 2 2 2 02-01 Water Sump 1 1 1 1 11-01 Filling (Inner Section) 2 2 - 2 02-02 Outlet Nozzle 1 1 1 1 11-03 Filling (1/3 Section) - - 6 - 02-03 Inlet Nozzle 1 1 1 1 11-06 Filling (1/6 Section) - - - 12 02-04 Over Flow Nozzle 1 1 1 1 11-08 Filling (1/8 Section) 16 16 16 16 02-05 Drain Nozzle 1 1 1 1 12-01 Sprinkler Head 1 1 1 1 02-06 Automatic Filler Nozzle 1 1 1 1 12-02 Center Post 1 1 1 1 02-07 Quick Filler Nozzle 1 1 1 1 12-03 Turnbuckle 6 8 8 10 02-08 Float Valve Assembly 2 2 2 2 12-04 Tension Wire 6 8 8 10 02-09-01 Over Flow 1 1 1 1 13-01 Sprinkler Pipe 6 8 8 10 02-09-02 Over Flow Connector 1 1 1 1 13-02 End Cap 6 8 8 10 02-10 Suction Strainer 1 1 1 1 13-03 Eliminator 6 8 8 10 02-12A Connector 1 1 1 1 14-01 Frame Ass'y Main Pipe 2 2 2 2 02-13 Elbow 3 3 3 2 14-02 Frame Ass'y Stay Pipe 2 2 2 2 03-01 Water Basin 12 12 16 16 15-01 Motor Base 1 1 1 1 04-01 Base Plate - B 6 6 8 8 15-02 U-Bolt 4 4 4 4 04-02 Stiffener Ring - 1 6 6 8 8 16-01 Motor 1 1 1 1 04-03 Truss Pipe - B1 6 6 8 8 16-02 Speed Reducer 1 1 1 1 04-04 Truss Pipe - B2 6 6 8 8 16-03 Fan Key 1 1 1 1 05-01 Casing (Diffuser) 12 12 16 16 16-04 Fasten Nut 1 1 1 1 05-02 Casing (Cylinder) 12 12 16 16 16-05 Lock Nut 1 1 1 1 05-03 Stiffener Ring - 2 6 6 8 8 17-01 Fan Hub 1 1 1 1 05-04 Casing Stand 12 12 16 16 17-02 Fan Blade 4 4 4 4 05-05 Inserted Bar 12 12 16 16 17-04 U-Bolt 8 8 8 8 05-06 Hand Hole Cover 1 1 1 1 18-01 Fan Guard 8 8 8 8 06-01 Stand Pipe 1 1 1 1 19-00 Basin Supporter Ass'y 12 12 16 16 06-02 Stand Pipe Base 1 1 1 1 20-01 Louver Supporter 36 36 48 48 06-03 Packing 1 1 1 1 20-01-B Louver Supporter - B 36 36 48 48 07-02 Column 1 1 1 1 20-02 Inlet Louver 18 18 24 24 08-01 Filling Supporter - A 6 6 8 8 20-01-C Inlet Louver 12 18 16 24 08-02 Filling Supporter - B 6 6 8 8 20-08 Wing Bolt 108 108 144 144 08-03 Filling Supporter - C 18 18 24 24 20-09 Plastic Washer 108 108 144 144 08-04 Fill Supt. Clamping Band 12 12 16 16 Others Bolts & Nuts 1 Set 1 Set 1 Set 1 Set 08-06 Filling Supporter - E - - 16 16

Water Basin Sealing Material A Fiberglass 1 Set B Polyester Resin 1 Keg C Catalyst 1 Bottle


T-2400 Through T-3000 Parts Table


SAMPLE WARRANTY

ONLY!!!

Warranty Cooling Tower Systems, Inc. is pleased to provide _____________ , located at: ________ _______ . Purchase Date: Model No.: Serial No.: Motor Fan No.: Frame No.: V-Belt Speed Reducer No. (If Applicable): DOMESTIC – WITHIN THE CONTINENTAL UNITED STATES: A. Ten Years on FRP, (fiberglass) casing, and cold water basins. B. Two (2) years on all PVC fillings. C. One (1) year on all fan motors, major drive components, and all internal moving parts, only. NOTE: An Extended Manufacturer’s Warranty is available, for an additional nominal fee, and is set into place as part of the original purchase. INTERNATIONAL ORDERS/WARRANTY: A. Eighteen (18) months, after shipping date. B. One (1) year, after initial start-up of Cooling Tower. C. *Note – only “A” or “B” is applicable, which ever comes first. We at Cooling Tower Systems, Inc. Thank You for your patronage and look forward to adding you as a satisfied customer. With Best Regards, Joe Coates, President Cooling Tower Systems, Inc. 196 Lower Cherry Street Macon, GA 31201 478-755-1905 / 800-752-1905 Email: [email protected] Website: www.coolingtowersystems.com

CTS Sample Warranty

http://www.coolingtowersystems.com/


Notes

Documents

Cooling Tower List Price Guide