Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Conveying and Separation Technology for preparation processes
conveying and separation technology
progress through diversity
Machines with a proven track record
Finger ScreenPre-screening of treated commercial waste
with a mesh size of 300 mm.
© S
pale
ck
Pre-Screening
2. Finger Screen
3. Finger Screen
Grading
4. Waste Recycling Screen
5. Waste Recycling Screen
6. Waste Recycling Screen
7. Waste Recycling Screen
Fine Screening
8. Flip Flow Screen Elastica
9. Flip Flow Screen Elastica
10. Flip Flow Screen Elastica and Miscellaneous
Vibrating Conveyors
11. Pan Feeder
12. Vibrating Conveyors
Resonance Feeder
Density Separator
Index
Coarse Screening / Pre-Screening
conveying and separation technology
progress through diversity
© S
pale
ck
Screens for recyclable material
© S
pale
ck
The proven screening solution for recyclable materialsThe SPALECK recyclable material screen is a circular vibrating screen driven by an AC motor.The impact area has a solid surface, which ensures good material flow, increases the service life of the screen panels and avoids blockages.
© S
pale
ck
Pre-Screeningof commercial waste with a mesh size of 300 mm.
Pre-ScreeningFor pre-screening
broken glass.
Refuse Incineration SlagFinger screen with double unbalanced motor for pre-screening of refuse incineration slag.
Household Waste
© S
pale
ck
Grading Screening
© S
pale
ck
conveying and separation technology
progress through diversity
Shredder Light Fraction
Shredder Light FractionFor grading shredder light fraction with a mesh size below 20 mm.
Waste Recycling ScreenComplete screening unit consisting of a screening
machine, sub-frame structure and chute in a compact design.
Electronic WasteScreening line for grading shredded electronic waste with a mesh size below 20 mm.
© S
pale
ck©
Spa
leck
© S
pale
ck
Vibrating Screen with special screening panel Used during preparation of biomass for fine and coarse screening with mesh sizes of 20 to 300 mm. Screening without tangling and without clogging.
Waste Wood and Bulky Wastewith upstream shredder and downstream
hammer mill. Mesh sizes of 10 and 150 mm.
Waste Wood Screeningusing a circular vibrating machine in accordance with the requirements of biomass heating power plants for energy generation or recycling.
Combined Systemsfor fine screening wood chips and feeding sorting devices in one unit. A dust sealing system can be provided on request.
© S
pale
ck
© S
pale
ck
© S
pale
ck
Biomass
© S
pale
ck
conveying and separation technology
progress through diversity
1 = PU Screening Mats2 = Support Frame 3 = Dynamic Frame
1 1
2 2
3 3
Relative Movement
The solution for screening recyclable materials – without clogging
Flip Flow ScreenGrading of difficult, sticky or wet materials into an infinite variety of sizes.
...how it worksThe relative movement of both screening frames creates a “trampoline effect“ in the screening mats. The advantages of this effect are:
· High acceleration up to 50g in the screening mats · Loosening up of the product
© S
pale
ck
© S
pale
ck
Screening line for commercial and construction waste
Screening line for roofing felt
Screening line for Green Dot waste
© S
pale
ck
© S
pale
ck
Special Applications
Fine Screening
© S
pale
ck
conveying and separation technology
progress through diversity
© S
pale
ck
Screening of coal dust and bentonite with a mesh size of less than 1 mm.
Screening machine for screening copper concentrate
Separation of impurities (inert material, sand) from common household waste.
Sand drainage with a mesh size of 1 mm.
© S
pale
ck
© S
pale
ck
Screening Out
Single-Deck Flip-Flow ScreenCombined with an eddy current separator for screening refuse incineration slag, with a mesh size of 4 mm.
Double-Deck Flip Flow Screenfor screening household waste
with a grain size below 60 mm.Mesh sizes 20 + 8 mm.
Slag©
Spa
leck
© S
pale
ck
© S
pale
ck
Screening MatsFlexible PUR screening mats to prevent blockages and sticking.
© S
pale
ck
conveying and separation technology
progress through diversity
© S
pale
ck
© S
pale
ck
Feed Channel and Hopper for commercial waste
© S
pale
ck
© S
pale
ck
© S
pale
ck
Pan Feeder for construction waste with pre-separation by two grizzly screens
Feed Channel for un-shredded and pre-sorted commercial waste
Commercial Waste
Vibrating Conveyors
Bunker discharge channels with inspection opening for conveying 700 tons of coke per hour.
© S
pale
ck
Feed Channelsfor the even distribution of waste,
and other recyclable material. Individually designed spreaders support the even distribution on the relevant screening surface.
Special non-adhesive linings prevent caking of wet material.
Conveying and even distribution of electronic waste for the downstream sorting devices.
© S
pale
ck
© S
pale
ck
Residual Waste
conveying and separation technology
progress through diversity
SPALECK density separators are linear vibrating machines driven by two unbalanced motors.
Density separators separate materials on the basis of their kinetic energy (ballistic trajectory) and differences in grain shape. Heavy and cuboidal materials fall downward on the
slanted plates due to gravity. However light and flat materials are fed upward on the slanted plates. The
combination of the inclination of the slanted plates, the adjustment of the vibration parameters and ballistic
trajectory of the material can be used to achieve high quality separation.
The density separators can be closed or open, and the slant tables can be surface treated.
© S
pale
ck
Density Separators
The SPALECK resonance conveyor has unbalanced motors or unbalanced exciters.
Resonance conveyors are systems that vibrate two weights, producing a small vibration that is transmitted to
cause a large oscillation of the feed trough (the resonator). Fixed, dynamic thrust springs are used to direct vibrations.
The feed output can be adjusted for the application using a frequency convertor.
Dynamic thrust springs compensate for the vibrations that are generated, and the “microthrow principle”
improves transport.Resonance conveyors can be closed or open, they can
be surface treated, and they can be equipped with additional components. ©
Spa
leck
Resonance Conveyors©
Spa
leck
© S
pale
ck
conveying and separation technology
progress through diversity
Expert Advice
Testing
Design
Manufacturing
Service
MSW Commercial Waste Old Tires Biomass Roofing Felt
16
-Sei
ter
Förd
er-
u. S
epar
iert
ech
nik
US
. (0
4-2
01
2)
AL
L D
ATA
SUBJ
ECT
TO C
HAN
GE
WIT
HO
UT
PRIO
R N
OTI
CE.
conveying and separation technology
progress through diversity
Spaleck GmbH & Co. KG Robert-Bosch-Straße 15 46397 Bocholt/Germany
Phone +49 2871 2134-16 Fax +49 2871 2134-24 [email protected] · www.spaleck.de/f-s
T. 704.944.3232877.801.3232
www.efactor3.com
eFACTOR3, LLC601 Eagleton Downs Drive
Suite DPineville, NC 28134
Your North American Partner