Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
CONTROL ROOM INFRASTRUCTURE
Universal Cart Systems Ergonomic. Modular. Future-Proof
2
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
yy Mobility In Practice 2
yy Knürr DacoMobile® 5
yy Knürr MetraMobil® 21
yy Knürr SynergyCart® 29
yy Knürr Cabinet Cart – Rollo 37
yy Accessories 42
yy Individual solution 49
KNÜRR MOBILE EQUIPMENT CARRIERS
Ergonomic details also simplify daily tasks in a wide range of environments. An extensive range of accessories supplements Knürr’s mobile equipment carriers as requested by the customer: Flat screen holders, ESD castors, isolating transformers and leakage detectors, cable routing elements and other practical accessories.
MODULAR & INDUSTRIAL SOLUTIONS
Whether for the electronics laboratory, in the logistics and in the automotive sector, our extensive standard range provides diverse solutions for the safe and secure mobility of valuable equipment. Our modular designs enable versatile cart configurations, immediately or at any time later on. For demanding ESD environments Knürr provides various cart systems – ranging from robust transport trolleys through to the fully equipped measurements and diagnostics cart.
Mobility In Practice
MOB20131
3
MET 20000MOB20162
4
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
Mobile Equipment CarriersKnürr DacoMobile® Page 5 to 19
5
yy Stability
yy Total load rating of up to 2100 Nyy Worktops each with up to 800 N load rating High stability with low-lying centre of gravityyy Distributed load drawer extension up to 200 Nyy Torsional strength with stable aluminium extrusions on die-cast aluminium stabilizers and crosspiece of sheet steelyy Optimal stability for equipment set up in the trolley with raised edges all around the worktop
yy Convenience
yy Optimised operation with additional module components, such asyy Cable ductyy Rear panelyy Euro mains distributoryy Master switchyy Socket strip
Knürr DacoMobile®
Strong points
yy Ergonomically optimal adjustment withyy Keyboard extensionyy Pull-out shelvesyy Effortless management of obstacles and uneven floors with Ø 125 mm large smooth-running castorsyy Positioning with 2 lockable castorsyy No marks and scratches on the doors, panels and fittings due to the integrated plastic bumper cap
yy Variability
yy Standard and ESD model componentsyy Modular designs enable numerous individual modelsyy Versatile applications ranging from the simple storage trolley to the complex laboratory stationyy Simple and quick adjustment without special tools
MOB00274
MOB20053
MOB20095
MOB20096
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
= assemble to order (shipped within 10 working days)
Caution: In case of larger orders , delivery times may increase.
P
6
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
yy Modules can be installed in 50 mm increments in heightyy Smooth-running castors, Ø 125 mm,
two with stoppers
yy Material
Basic rack consists of:yy Extrusions: extruded aluminumyy Runners: die-cast aluminumyy Crosspiece: sheet steel
Worktop:yy sheet steel
Other modules: yy combination of sheet steel with laminated
particle board, or sheet steel.
yy Finish
Metal parts: yy powder-coated texture
Laminated sheet: yy fine-textured
yy Color
Extrusions, runners, castors:yy RAL 5003, sapphire blue
or RAL 7021 ESD or RAL 7035, light grey
Modules:yy RAL 7035, light grey
ESD castors: yy black
yy Maximum static load rating
Per basic rack: yy 2,100 N
Per castor: yy 750 N
Surface load per worktop: yy up to 800 N
yy How supplied
yy Fully assembled
Knürr DacoMobile® system componentsTechnical data
MOB20035
Installation position of the Knürr DacoMobile®
elements in 50 mm increments, measured from above.
D = 680 mm
hb = 120 mm
df = 97 mm
dr = 97 mm
MOB20077
D
hb
MOB20076
W
w
467
df
dr 20
4
MOB20051
W (mm) 600 700w (mm) 496 596
7
yy Material
yy Worktops – sheet steel yy Handle(s) – aluminum extrusionyy Base unit crosspiece – sheet steel
yy Dimensions
yy Height 1,515 mm
yy Color
yy RAL 5003, sapphire blue /yy RAL 7035, light grey
yy Supply schedule
yy 1 basic rack yy 2 handlesyy 4 worktops
yy How supplied
yy Partially assembled
Knürr DacoMobile® 1515
yy Color combination
yy Worktop, RAL 7035, light grey Extrusions and stabilizer, RAL 7021 black grey
yy Castor – Ø 125 mm
yy Load rating
Basic rack: yy 2,100 N
Per castor: yy 750 N
Surface load per worktop:yy 800 N
yy Material / Finish
Basic rack consists of:yy Extrusions: extruded aluminumyy Rockers: die-cast aluminum,
powder-coated;
Sliding handle – aluminum extrusion Base unit crosspiece – sheet steel Drawer unit, sheet steel Table top, sheet steel
yy Supply schedule
yy 1 ESD-basic rackyy 2 ESD-worktopyy 1 ESD-draweryy 1 ESD-handle
yy How supplied
yy Assembled
Mobile ESD-Measuring and Analysis Station
MOB20097
MOB20098
W H D w Order no. UP
700 1515 685 596 P 00.106.628.2 1 unit
W H D w d Order no. UP
700 860 685 596 490 00.115.620.9 1 unit
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
= assemble to order (shipped within 10 working days)
Caution: In case of larger orders , delivery times may increase.
P
8
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
Knürr DacoMobile® Cable DuctLarge
yy With convenient hinged cover with two quicklocksyy Separate cable routing via mounting stripyy Cable exit via sealing lips at any heightyy Can be mounted left or right
Knürr DacoMobile® Basic Rack
yy Finish
Replace „x“ with the number of your color choice. Final digit of order number .1:
yy Vertical extrusions, die-cast aluminium runners RAL 7035 light grey Bottom frame cover RAL 7035 light grey Castors, bumper-caps and end-caps black
Final digit of order number .2:yy Vertical extrusions, die-cast aluminium
runners RAL 5003 sapphire blue Bottom frame cover RAL 7035 light grey Castors, bumper-caps and end-caps black RAL 5003 sapphire blue
ESD finish .9:yy Vertical extrusions, die-cast aluminum
runners RAL7021 black grey, ESD bottom cover RAL 7035, light grey, ESD Conductive castors, impact protection caps and end-caps, black
yy Supply schedule
yy 1 bottom cover made of sheet steelyy 2 die-cast aluminum runners with
plastic bumper capsyy 4 smooth-running castors – Ø 125 mm, 2
with snibyy 2 vertical aluminum extrusions with
threaded strips for mounting the modules
Design your own individual equipment carrier as follows:
1. Choose ESD or Standard
2. Select a width
3. Select the height of the basic rack
4. Coose the appropriate accessories on the following pages
MOB00333
yy Material
yy Sheet steel, powder-coated RAL 7035, light grey, antistatic ESD: RAL 7021, black-grey, antistatic
yy Supply schedule
yy 1 cable ductyy Mounting material
MOB20034
w
MOB20057
W H w ESD Order no. UP600 750 496 00.101.505.x 1 unit600 750 496 • 00.101.614.9 1 unit700 750 596 00.101.605.x 1 unit700 750 596 • 00.101.615.9 1 unit
600 1120 496 00.103.505.x 1 unit600 1120 496 • 00.103.614.9 1 unit
700 1120 596 P (.2) 00.103.605.x 1 unit
700 1120 596 • 00.103.615.9 1 unit
600 1515 496 00.104.505.x 1 unit600 1515 496 • 00.104.614.9 1 unit
700 1515 596 P (.2) 00.104.605.x 1 unit
700 1515 596 • 00.104.615.9 1 unit
600 1915 496 00.105.505.x 1 unit600 1915 496 • 00.105.614.9 1 unit
700 1915 596 P (.2) 00.105.605.x 1 unit
700 1915 596 • 00.105.615.9 1 unit
W H D ESD Order no. UP85 1120 190 00.118.014.1 1 unit85 1515 190 00.118.015.1 1 unit85 1915 190 00.118.016.1 1 unit85 1120 190 • 00.118.214.9 1 unit85 1515 190 • 00.118.215.9 1 unit85 1915 190 • 00.118.216.9 1 unit
9
Knürr DacoMobile® Castor Set
yy Load capacity: 750 N per castor – ø 125 mm
yy Color
Standard castors: yy RAL 5003, sapphire blue
ESD: yy Black
yy Supply schedule
yy 4 smooth-running castorsyy 2 with stopper
MOB20067
Knürr DacoMobile® Worktop
yy Material
yy Sheet steel, powder-coated
yy Color
yy RAL 7035, light grey ESD version:
yy RAL 7035, light grey, ESD
yy Supply schedule
yy 1 worktopyy Mounting material
yy Note
yy Please order handle and anti-slide mats separately.
MOB20071version: sheet steel
MOB20070
Knürr DacoMobile® Worktop Handle
yy For sheet steel worktopsyy Can be mounted from front and/or rear
yy Material
yy Sheet steel Aluminum extrusion handle
yy Color
yy RAL 7035, light grey ESD:
yy RAL 7021, dark grey, antistatic
yy Supply schedule
yy 1 handleyy 2 mounting bracketsyy Mounting material
ESD Order no. UP
P 00.128.965.2 1 unit
• P 00.128.975.9 1 unit
H D w Model ESD Order no. UP
50 490 496 Sheet steel 00.101.530.1 1 unit
50 490 596 Sheet steel P 00.101.630.1 1 unit
50 490 496 Sheet steel, ESD • 00.101.540.1 1 unit50 490 596 Sheet steel, ESD • 00.101.640.1 1 unit
w Model ESD Order no. UP
496 Dacomobile worktop handle 00.101.045.1 1 unit
596 Dacomobile worktop handle P 00.101.050.1 1 unit
496 Dacomobile worktop handle ESD • 00.101.145.1 1 unit596 Dacomobile worktop handle ESD • 00.101.150.1 1 unit
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
= assemble to order (shipped within 10 working days)
Caution: In case of larger orders , delivery times may increase.
P
10
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
Tiltable Mounting Plate
yy Universal mounting plate. Can be mounted in three different angle positionsyy Maximum static surface load: 20kg
yy Material
Sheet-steel, powder-coated
yy Finish
yy RAL 7035 light grey yy Supply schedule
yy 1 mounting plateyy Mounting material
Knürr DacoMobile® Cross Extrusion
MOB20063
yy For cross-bracing the basic rack with heavy components or with high carts
yy Material
yy Sheet steel, powder-coated
yy Finish
Final digit of order number .1: yy RAL 7035 light grey
Final digit of order number .2: yy RAL 5003 sapphire blue
Final digit of order number .9: yy ESD version, RAL 7021 black grey ESD
yy Supply schedule
yy 1 cross extrusionyy Mounting material
MOB20050
Knürr DacoMobile® Telescopic shelf
yy ESD or standard version yy Shelf with telescopic slidesyy Locking in closed an extended positionyy Maximum static load: 22kg
yy Material
yy Sheet steel, powder-coated Tray handle – plastic
yy Color
yy Extension board, RAL 7035 light grey, antistatic Standard tray handle, RAL 7035 light grey ESD handle, black
yy Supply schedule
yy 1 Telescopic shelf, pre-assembledyy Mounting material
MOB20132
D w Order no. UP600 496 00.101.134.1 1 unit600 596 00.101.135.1 1 unit700 496 00.101.137.1 1 unit700 596 00.101.138.1 1 unit
w Model ESD Order no. UP
496 Sheet steel 00.122.510.X 1 unit596 Sheet steel 00.122.611.X 1 unit496 Sheet steel, ESD • 00.122.510.9 1 unit596 Sheet steel, ESD • 00.122.611.9 1 unit
H D w Model ESD Order no. UP
50 490 496 Sheet steel 00.125.525.2 1 unit
50 490 596 Sheet steel P 00.125.625.2 1 unit
50 490 496 Sheet steel, ESD • 00.125.530.1 1 unit50 490 596 Sheet steel, ESD • 00.125.630.1 1 unit
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
= assemble to order (shipped within 10 working days)
Caution: In case of larger orders , delivery times may increase.
P
11
MOB20074
Knürr DacoMobile® Keyboard ExtensionClosed
yy ESD or standard versionyy Closed sheet steel carcassyy Main unit cover recessed for optional
anti-slide matsyy Extension board with telescopic slidesyy Mouse table can be moved to the left or
right with or without lockyy Maximum static load for telescopic shelf:
10kg
yy Material
yy Sheet steel, powder-coated Tray handle – plastic
yy Color
yy Main unit, extension board, mouse table: RAL 7035, light grey, antistatic Standard tray handle, RAL 7035, light grey ESD handle, black
yy Supply schedule
yy 1 keyboard extension, closed, with mouse tableyy Mounting material
MOB20073
Knürr DacoMobile® Drawer Module
yy ESD or standard versionyy With or without lockyy Height – 100 or 150 mmyy Sheet steel main unityy Main unit cover with depression for
optional anti-slide matsyy Maximum static load:
10 kg for drawer 20 kg for corpus
yy Material
yy Sheet steel, powder-coated Tray handle – plastic
yy Color
yy Main unit, drawer RAL 7035, light grey, antistatic Tray handle: Standard RAL 7035, light grey ESD handle: Black
yy Supply schedule
yy 1 drawer moduleyy Mounting material
MOB20072
MOB20068
Knürr DacoMobile® Storage Tray
yy Tray for paper, cables or small partsyy Height 80 mmyy With perforation Ø 8 mm
yy Material
yy Sheet steel, powder-coated
yy Color
yy RAL 7035, light grey, antistatic
yy Supply schedule
yy 1 storage trayyy Mounting material
H D w Model ESD Order no. UP
100 490 496 With loc 00.127.516.2 1 unit100 490 596 With loc 00.127.616.2 1 unit100 490 496 With loc • 00.127.526.1 1 unit100 490 596 With loc • 00.127.626.1 1 unit
H D w Model ESD Order no. UP
100 490 496 With lock 00.117.536.2 1 unit100 490 596 With lock 00.117.616.2 1 unit100 490 496 With lock • 00.117.526.1 1 unit100 490 596 With lock • 00.117.626.1 1 unit150 490 496 With lock 00.117.538.2 1 unit
150 490 596 With lock P 00.117.618.2 1 unit
150 490 496 With lock • 00.117.528.1 1 unit150 490 596 With lock • 00.117.628.1 1 unit
H D w Model ESD Order no. UP
80 490 496 ESD • 00.111.512.1 1 unit80 490 596 ESD • 00.111.612.1 1 unit
12
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
Knürr DacoMobile® Mounting Kit, FixedFor 19” DoubleProRack Enclosures
Spacer set for DoubleProRack
yy Installation option for two different enclosure depths in the basic rackyy Maximum static load rating, 800 Nyy Only for Knürr DacoMobile® width 600 mm!yy Only for Knürr DoubleProRack Enclosure
Width 600; depth 500 mm, 600 mm, 700 mm
yy Recommended for DoubleProRack enclosures, mounted in DacoMobile® trolley to stabilize the enclosure
yy Material
yy Aluminium extrusion, powder-coated RAL 7035 light grey
yy Supply schedule
yy 1 pair of mounting brackets
yy Note
More information on 'DoubleProRack': yy www.pdb.knuerr.com
yy Supply schedule
yy 2x spacer 20mm lengthyy 2x Cylinder head screw M6x60yy 2x Spring nut M6yy 2x Star washer 6.4mm
MOB20067
MOB20082
MOB20133 MOB20134
W H D Order no. UP
500 00.101.130.1 1 unit600 00.101.131.1 1 unit700 00.101.132.1 1 unit
W H D Order no. UP
00.101.016.1 1 unit
13
DOP00256
DOP00230
Vertiv™ Knürr® DoubleProRack® 19” Stand-alone Enclosure
yy Description
yy For components compliant with IEC 297-3yy Side covers and rear panel may be
removedyy Flexible assembly of components using
T-slot (also available with mounting holes)yy Cable entry via rear panelyy Heat loss discharge via convection on the
rear panel (optional with fan unit)
yy Jumpering space
yy Front 125 mm
yy Load rating
yy 1500 N static
yy Protection rating
yy IP 20
yy Material / Finish
yy Covers, sheet steel, powder-coated textureyy Die-cast aluminum frameyy Extruded aluminum extrusionsyy Front door glass infill, single safety glass
panel
yy Color
yy Panels RAL 7035 light greyyy Frame and extrusions, RAL 5008,
grey-blue
yy Scope of delivery
yy 1 x frame rack incl. side coversyy 1 x full glass dooryy 1 x rear panel with cable entry, 3 partsyy 1 x panel, above, with vent slotsyy 1 x panel, below, with vent slotsyy 1 x 19“ component set (4 vertical
extrusions with T-slot)yy 1 x grounding set with M8 grounding bolt
yy How supplied
yy Assembled
yy Note
yy When using a DoublePro rack in combination with a DacoMobile, we recommend to choose the DacoMobile in color combination .1 (light grey)
D
W
w
d
W H D U h d (max.) Model Order no. UP554.4 577 600 12 532 435 With full glass door 01.246.643.1 1 unit554.4 711 600 15 666 435 With full glass door 01.246.644.1 1 unit554.4 844 600 18 799 435 With full glass door 01.246.645.1 1 unit554.4 978 600 21 932 435 With full glass door 01.246.646.1 1 unit554.4 1111 600 24 1066 435 With full glass door 01.246.647.1 1 unit
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
= assemble to order (shipped within 10 working days)
Caution: In case of larger orders , delivery times may increase.
P
14
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
DOP00253
Vertiv™ Knürr® DoubleProRack® 19” Enclosure without Front Door
yy Description
yy For components compliant with IEC 297-3yy Side covers and rear panel may be
removedyy Heat loss discharge via convection on the
rear panel (optional with fan unit)
yy Load rating
yy 1500 N static
yy Protection rating
yy IP 20
yy Material / Finish
yy Covers, sheet steel, powder-coated textureyy Die-cast aluminum frameyy Extruded aluminum extrusions
yy Color
yy Panels RAL 7035 light greyyy Frame and extrusions, RAL 5008,
greyblue
yy Scope of delivery
yy 1 x frame rack incl. side coversyy 1 x panel, above, with vent slotsyy 1 x panel, below, with vent slotsyy 1 x rear panel (from 12 U enclosure height
incl. 3 U vented cover plate)yy 2 x 19“ extrusions, front, with mounting
holesyy 2 x 19“ extrusions at the rear, T-slot
yy How supplied
yy Assembled
yy Note
yy When using a DoublePro rack in combination with a DacoMobile, we recommend to choose the DacoMobile in color combination .1 (light grey)
DOP00052
Dd
W H D U h d (max.) Kg Model Order no. UP554.4 311 500 6 265 460 12.5 Without door 01.243.506.1 1 unit554.4 444 500 9 399 460 15.0 Without door 01.243.509.1 1 unit554.4 577 500 12 532 460 17.0 Without door 01.243.512.1 1 unit554.4 711 500 15 666 460 19.5 Without door 01.243.515.1 1 unit
554.4 311 600 6 265 560 14,0 Without door 01.243.606.1 1 unit554.4 444 600 9 399 560 16.5 Without door 01.243.609.1 1 unit554.4 577 600 12 532 560 19.0 Without door 01.243.612.1 1 unit554.4 711 600 15 666 560 22.0 Without door 01.243.615.1 1 unit554.4 844 600 18 799 560 24.5 Without door 01.243.618.1 1 unit554.4 978 600 21 932 560 27.0 Without door 01.243.621.1 1 unit554.4 1111 600 24 1066 560 29.5 Without door 01.243.624.1 1 unit
554.4 577 700 12 532 660 21.5 Without door 01.243.712.1 1 unit554.4 711 700 15 666 660 24.0 Without door 01.243.715.1 1 unit554.4 844 700 18 799 660 27.0 Without door 01.243.718.1 1 unit554.4 978 700 21 932 660 29.5 Without door 01.243.721.1 1 unit554.4 1111 700 24 1066 660 32.5 Without door 01.243.724.1 1 unit
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
= assemble to order (shipped within 10 working days)
Caution: In case of larger orders , delivery times may increase.
P
15
Vertiv™ Knürr® DoubleProRack®19“ Installation, Front with T-slot
yy Can also be used as second mounting level
yy Material
yy Aluminum extrusions
yy Finish
yy Polished
DOP20004
DOP00313
yy Scope of delivery
yy 2 x 19” extrusions at the front, T-slotyy 1 x Mounting kit
yy How supplied
yy In sets
Vertiv Knürr DoubleProRack19“ Installation, Front with Mounting Holes
yy Can also be used as second mounting level
yy Material
yy Extruded aluminum extrusions
yy Finish
yy Polished
DOP20005
DOP00055
yy Scope of delivery
yy 2 x 19” extrusions at the front, mounting holes
yy How supplied
yy In sets
Vertiv Knürr DoubleProRackFan Rear Panel 3 U
yy With axial fansyy With thermostat
yy Technical data for single fan
Max. volume flow (free blowing): yy 162 m3/h
Noise emission (free blowing): yy 37 dB(A)
yy Technical data for thermostat
Setting range: yy 0 to 60°C
Mains supply: yy 240 V / 50 Hz
Nominal current: yy 16 A
DOP20035
DOP20036
yy Scope of delivery
yy 1 x fan rear panel, wiredyy 1 x Mounting kit
yy Finish / Color
yy Powder-coated texture, RAL 7035 light grey
yy How supplied
yy Assembled
yy Note
yy Cannot be used in the enclosure’s lowest U
U Order no. UP6 01.240.440.9 1 set9 01.240.443.9 1 set12 01.240.445.9 1 set15 01.240.446.9 1 set18 01.240.447.9 1 set21 01.240.448.9 1 set24 01.240.449.9 1 set
U Order no. UP6 01.240.490.9 1 set9 01.240.493.9 1 set12 01.240.495.9 1 set15 01.240.496.9 1 set18 01.240.497.9 1 set21 01.240.498.9 1 set24 01.240.499.9 1 set
W H U Model Order no. UP554.4 132.5 3 With thermostat 01.243.428.1 1 unit
16
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
Vertiv Knürr DoubleProRackRear Panel, closed
yy For DoubleProRack width 554.4 mm
yy Material / Finish
yy Sheet steel, 0.8 mm, powder-coated texture
yy Color
yy RAL 7035, light grey
DOP00275
yy Scope of delivery
yy 1 x rear panel, closedyy 1 x Mounting kit
yy How supplied
yy In sets
Vertiv™ Knürr® DoubleProRack®Connection Panel with Brush Strip
yy To cover rear panel along with the corresponding rear panel shortened by 3 Uyy For DoubleProRack width 554.4 mmyy With brush strip for cable routing and
strain relief
yy Finish / Color
yy Powder-coated texture, RAL 7035 light grey
DOP00274
DOP00288
yy Scope of delivery
yy 1 x connection plateyy 1 x Mounting kit
yy How supplied
yy In sets
ELM00068
W U Order no. UP554.4 6 01.240.454.1 1 unit554.4 9 01.240.457.1 1 unit554.4 12 01.240.459.1 1 unit554.4 15 01.240.460.1 1 unit554.4 18 01.240.461.1 1 unit554.4 21 01.240.462.1 1 unit
W H U Order no. UP554.4 132.5 3 01.243.438.1 1 unit
Grounding Bar
yy For safe grounding or potential equalization of equipment and components
yy Material
yy Electrolyte copper 9 x 9
yy Scope of delivery
yy 1 x grounding baryy 2 x bracketsyy 1 x Mounting kit
U Order no. UP12 01.110.703.9 1 unit21 01.240.545.9 1 unit
17
Contact Clamp
yy Enables safe connection of equipment and components to grounding baryy For cables up to 25 mm
DOP20016
Vertiv Knürr DoubleProRackGrounding Set for Enclosures
yy For grounding top/bottom coveryy With central grounding bolt
yy Scope of delivery
yy 2 x grounding connections, length 250 mmyy 4 x spring nuts, M5
MEC20122
DOP20025
MEC20123
DOP00286
yy 2 x washersyy 4 x cylinder screws, M5 x 10yy 1 x grounding bolt
yy How supplied
yy In sets
Vertiv Knürr DoubleProRackGrounding Set for Doors and Trims
yy For grounding doors and/or cover plates
yy Scope of delivery
yy 5 x grounding connections, length 250 mmyy 1 x grounding connection, 250 mm,
two-sided AMP plugyy 5 x spring nuts, M5
yy 5 x cylinder screws, M5 x 10 with tooth-lock washeryy 5 x washers
yy How supplied
yy In sets
yy Scope of delivery
yy 120 x contact clamps
Order no. UP01.243.400.9 1 set
Order no. UP01.245.400.9 1 set
Order no. UP01.110.715.9 20 units
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
= assemble to order (shipped within 10 working days)
Caution: In case of larger orders , delivery times may increase.
P
18
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
ESD mounting set for isolating transformer
yy Tray: Mount on underside of base unityy Secure fixing of the isolating transformersyy With ventilation perforations
yy Material
yy Sheet steel, powder-coated
yy Color
yy RAL 7035, light grey, antistatic
yy Supply schedule
yy 1 mounting setyy Mounting material
yy Note
yy Only for Knürr Dacomobile: W 696 mm, w 596 mm
MOB20064
Knürr DacoMobile® Master Switch Module
yy For mounting on the vertical extrusionsyy With lit on/off switch, whiteyy Pre-wired with H05VV-F3G cable, 1.5 mm²yy Sheet steel, powder-coated
yy Color
Standard: yy RAL 7035, light grey, antistatic
yy Supply schedule
yy 1 master switch moduleyy Mounting material
MOB20048
MOB00298
Knürr DacoMobile® Rubber Mat
yy Material
yy Self-adhesive rubber-mat made of open pore sponge rubber
yy Colour
yy Standard: grey, ESD: black
W H D Model Order no. UP520 120 350 Tray 00.101.262.1 1 unit
W H D Order no. UP40 76 90 00.118.001.1 1 unit
W w Model ESD Order no. UP600 496 Standard, for sheet-steel table top and drawer unit top 00.101.195.0 1 unit
700 596 Standard, for sheet-steel table top and drawer unit top P 00.101.200.9 1 unit
600 496 Standard, for sheet-steel keyboard extension open 00.101.196.0 1 unit700 596 Standard, for sheet-steel keyboard extension open 00.101.202.9 1 unit
600 496 ESD, for sheet-steel tabletop and drawer unit top • 00.101.198.0 1 unit
700 596 ESD, for sheet-steel tabletop and drawer unit top • P 00.101.208.9 1 unit
600 496 ESD, for sheet-steel keyboard extension open • 00.101.199.0 1 unit700 596 ESD, for sheet-steel keyboard extension open • 00.101.210.9 1 unit
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
= assemble to order (shipped within 10 working days)
Caution: In case of larger orders , delivery times may increase.
P
19
yy Color
yy RAL 5003, sapphire blue / RAL 7035 light grey
yy Supply schedule
yy 1 Basic rackyy 1 Cross extrusion
yy 2 19” Extrusionsyy 10 Chassis runners
yy How supplied
yy Part assembled
Knürr DacoMobile® 19”
MOB00402
MOB00336
W H D HU/U h Order no. UP606 1865 685 36 1600 01.316.016.2 1 unit606 2000 685 39 1733 01.316.019.2 1 unit
yy Material
yy Sheet steel, zinc passivated
yy Supply schedule
yy 2 Chassis runnersyy Mounting material
Knürr DacoMobile® Chassis Runner SetFor mounting 19” equipment
yy Dimensions
Length: yy 200 mm
Thickness:yy 2 mm
Angle bracket:yy 44 x 50 mm
W H D Order no. UP50 44 200 01.316.026.7 1 unit
20
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
Mobile Equipment CarriersKnürr MetraMobil® Page 21 to 27
21
yy Variability
yy A completely individual cart can be configured from a basic frame in 2 heights, 3 colors and 5 module components.yy Ideal height adjustment with variable height setting of the shelves
yy Stability
yy High load rating: up to 600 N per worktop up to 2200 N for full trolleyyy Distributed load drawer extension up to 100 Nyy High stability with advanced sheet steel construction
yy Functionality
yy Suitable for the most varied areas of application: PC or printer station, IT-cart, logistics or laboratory
Knürr MetraMobil®
Strong points
yy Cable management
yy Safe cable routing with two cable ducts integrated in the extrusionyy Clear and orderly cable management with integration of accessory parts, e.g. a socket strip, which can be mounted on the extrusion.
yy Well-thought out solutions
yy Vision and contact protection provided by the easy “on-off” rear panel, no tools neededyy Orderly arrangement of small material with drawer module with removeable small parts trayyy Smooth running 3/4 pull-out “Quattro” guide
yy ESD versions
yy Safety and protection in demanding ESD environments provided by ESD castors and ESD powder coating.
MET00003
MET 20000
MET00034
MET00037
22
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
Metramobil Basic height 1120 mm
yy Replace „x“ with the number of your color choice.
yy Final digit of order number .1:
yy Worktops, RAL 7035, light grey Extrusions, RAL 9006, white aluminium Handle, RAL 9011, graphite black Final digit of order number .2: yy Worktops, NCS 3060 R80B, blue
Extrusions, RAL 9006, white aluminium Handle, RAL 9011, graphite black Final digit of order number .9: yy Worktops, RAL 7016, anthracite grey
Extrusions, RAL 9006, white aluminium Handle, RAL 9011, graphite black
yy ESD versions: Note: ESD only in color variant .1 (light grey) Final digit of order number .1: Worktops, RAL 7035, antistatic light grey Extrusions, RAL 9006, white aluminum Handle: RAL 7021, dark grey, antistatic
yy Design your individual trolley as follows:
1. Select height of the basic trolley
2. Select ESD or standard model
3. Pick out additional modules
yy The basic model can be easily expanded with system components (bear ESD in mind!)
yy Worktops: set at any height
yy Dimensions
yy Height, 900 mm or 1120 mmyy Full width, 550 mmyy Useful width, 500 mmyy Depth, 580 mmyy Useful depth, 440 mmyy Castor Ø 125 mm
yy Load rating
Basic rack: yy 2200 N
Per castor: yy 750 N
Surface load per worktop: yy 600 N
yy Material/Finish
Basic rack consists of:yy Extrusions: extruded aluminium,
powder-coatedyy Worktops: sheet steel, powder-coat
textured Handle:
yy aluminium tube, powder-coat textured
yy Supply schedule, Basic Configuration
a. Height 900 mmyy 1 Basic rackyy 1 Worktop with handleyy 1 Worktop
b. Height 1120 mmyy 1 Basic rackyy 1 Worktop with handleyy 2 Worktops
yy Supply schedule Metramobil Light
yy 1 Basic rackyy 1 Worktop with handle
yy How supplied
yy Modules for self installation
Knürr MetraMobil® Basic Configurations
MET00018
Metramobil Basic height 900 mm
Metramobil light
MET00014
MET20008
W H D w d Model ESD Order no. UP
550 900 580 500 440 P (.1) 00.709.000.x 1 unit
550 900 580 500 440 • 00.709.100.1 1 unit
550 900 580 500 440 Metramobil light P (.1) 00.709.200.x 1 unit
1 unit
550 1120580 500 440 P (.1) 00.711.000.x 1 unit
550 1120580 500 440 • 00.711.100.1 1 unit
550 1120580 500 440 Metramobil light P (.1) 00.711.200.x 1 unit
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
= assemble to order (shipped within 10 working days)
Caution: In case of larger orders , delivery times may increase.
P
23
yy Replace „x“ with the number of your color choice.
yy Final digit of order number .1:
yy Worktops, RAL 7035, light grey Extrusions, RAL 9006, white aluminium Handle, RAL 9011, graphite black Final digit of order number .2: yy Worktops, NCS 3060 R80B, blue
Extrusions, RAL 9006, white aluminium Handle, RAL 9011, graphite black Final digit of order number .9: yy Worktops, RAL 7016, anthracite grey
Extrusions, RAL 9006, white aluminium Handle, RAL 9011, graphite black
yy Worktops: set at any height
yy Castor: Ø 125 mm
yy Load rating
Basic rack: yy 2200 N
Per castor: yy 750 N
Surface load per worktop: yy 600 N
yy Material/Finish
Basic rack consists of:yy Extrusions: extruded aluminium,
powder-coatedyy Worktops: sheet steel, powder-coat
textured Handle:
yy aluminium tube, powder-coat textured
yy Supply schedule
yy 1 Basic rackyy 1 Worktop with handleyy 1 Worktopyy 1 Keyboard extension with mouse table
yy How supplied
yy Modules for self installation
Knürr MetraMobil® 900
MET00058
yy Replace „x“ with the number of your color choice.
yy Final digit of order number .1:
yy Worktops, RAL 7035, light grey Extrusions, RAL 9006, white aluminium Handle, RAL 9011, graphite black Final digit of order number .2: yy Worktops, NCS 3060 R80B, blue
Extrusions, RAL 9006, white aluminium Handle, RAL 9011, graphite black Final digit of order number .9: yy Worktops, RAL 7016, anthracite grey
Extrusions, RAL 9006, white aluminium Handle, RAL 9011, graphite black
yy Worktops: set at any height
yy Castor: Ø 125 mm
yy Load rating
Basic rack: yy 2200 N
Per castor: yy 750 N
Surface load per worktop: yy 600 N
yy Material/Finish
Basic rack consists of:yy Extrusions: extruded aluminium,
powder-coatedyy Worktops: sheet steel, powder-coat
textured Handle:
yy aluminium tube, powder-coat textured
yy Supply schedule
yy 1 Basic rackyy 1 Worktop with handleyy 2 Worktopsyy 1 Keyboard extension with mouse table
yy How supplied
yy Modules for self installation
Knürr MetraMobil® 1120
MET00060
W H D w d Order no. UP
550 900 580 500 440 P (.1) 00.709.002.x 1 unit
W H D w d Order no. UP
550 1120 580 500 440 P (.1) 00.711.002.x 1 unit
24
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
yy Replace „x“ with the number of your color choice.
yy Final digit of order number .1:
yy Worktops, RAL 7035, light grey Extrusions, RAL 9006, white aluminium Handle, RAL 9011, graphite black Final digit of order number .2: yy Worktops, NCS 3060 R80B, blue
Extrusions, RAL 9006, white aluminium Handle, RAL 9011, graphite black Final digit of order number .9: yy Worktops, RAL 7016, anthracite grey
Extrusions, RAL 9006, white aluminium Handle, RAL 9011, graphite black
yy Worktops: set at any height
yy Castor: Ø 125 mm
yy Load rating
Basic rack: yy 2200 N
Per castor: yy 750 N
Surface load per worktop: yy 600 N
yy Material/Finish
Basic rack consists of:yy Extrusions: extruded aluminium,
powder-coatedyy Worktops: sheet steel, powder-coat
textured Handle:
yy aluminium tube, powder-coat textured
yy Supply schedule
yy 1 Basic rackyy 1 Worktop with handleyy 2 Worktopsyy 1 Drawer module
yy How supplied
yy Modules for self installation
Knürr MetraMobil® 1120 with drawer module
MET00017
W H D w d Order no. UP
550 1120 580 500 440 P (.1) 00.711.004.x 1 unit
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
= assemble to order (shipped within 10 working days)
Caution: In case of larger orders , delivery times may increase.
P
25
yy Replace „x“ with the number of your color choice.
yy Standard versions:
Final digit of order number .1:yy RAL 7035 light grey
Final digit of order number .2:yy NCS 3060 R80B, blue
Final digit of order number .9:yy RAL 7016 anthracite grey
yy ESD version: Note: ESD only in color variant .1 (light grey) Final digit of order number .1:
yy RAL 7035 anti-static, light grey
yy For storage and work purposes
yy Variable setting between the vertical extrusions
ESD model in accordance with EN 100015
yy Supply schedule
yy 1 Worktopyy Mounting material
yy How supplied
yy Flat-packed kit
Knürr MetraMobil® Worktop
MET00014
MET00040
Note:Anti-slide mats are not possible at the same time with keyboard extension!
yy Consists of 4 anti-slide mats
yy For slide-proof storage of parts to be transported
yy As scratch protection for the worktop
yy Material
yy Industrial rubber, self-adhesive
yy Color
yy Black
yy Supply schedule
yy 4 Anti-slide mats
yy How supplied
yy Flat-packed kit
ESD model
yy Consisting of four anti-slide mats, ESD, self-adhesive
yy Tests
yy ESD test in accordance with EN 100015
yy Material
yy Industrial rubber, antistatic
yy Color
yy Black
Knürr MetraMobil® Anti-Slide Mat Set
W H D d Model ESD Order no. UP
500 25 440 P (.1) 00.701.020.x 1 unit
500 25 440 • 00.701.120.1 1 unit
500 25 440 with handle P (.1) 00.701.021.x 1 unit
500 25 440 with handle • 00.701.121.1 1 unit
W H D d ESD Order no. UP
475 430 00.701.070.9 1 unit
475 430 • 00.701.170.9 1 unit
26
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
yy Replace „x“ with the number of your color choice.
yy Standard versions:
Final digit of order number .1:yy RAL 7035 light grey
Final digit of order number .2:yy NCS 3060 R80B, blue
Final digit of order number .9:yy RAL 7016 anthracite grey
yy ESD version: Note: ESD only in color variant .1 (light grey) Final digit of order number .1:
yy RAL 7035 anti-static, light grey
yy For mounting on Knürr MetraMobil® worktop and worktop with handle
yy With side mouse table, left/right
yy Extension 200 mm
ESD model in accordance with EN 100015
yy Supply schedule
yy 1 Keyboard extensionyy Mounting material
yy How supplied
yy Flat-packed kit
yy Note
yy With worktop with keyboard extension, an anti-slide mat is not possible!
Knürr MetraMobil® Keyboard Extension
MET00035
yy Replace „x“ with the number of your color choice.
yy Standard versions:
Final digit of order number .1:yy RAL 7035 light grey
Final digit of order number .2:yy NCS 3060 R80B, blue
Final digit of order number .9:yy RAL 7016 anthracite grey
yy ESD version: Note: ESD only in color variant .1 (light grey) Final digit of order number .1:
yy RAL 7035 anti-static, light grey
yy For holding small material
yy Including divider set
yy Material/Finish
yy Sheet steel, powder-coat textured
ESD model in accordance with EN 100015
yy Supply schedule
yy 1 Drawer moduleyy Mounting material
yy How supplied
yy Flat-packed kit
Knürr MetraMobil® Drawer Module
MET00017
W H D d ESD Order no. UP
505 45 200 P (.1) 00.701.060.x 1 unit
505 45 200 • 00.701.160.1 1 unit
W H D d ESD Order no. UP
500 165 440 P (.1) 00.701.001.x 1 unit
505 165 440 • 00.701.101.1 1 unit
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
= assemble to order (shipped within 10 working days)
Caution: In case of larger orders , delivery times may increase.
P
27
yy Replace „x“ with the number of your color choice.
yy Standard versions:
Final digit of order number .1:yy RAL 7035 light grey
Final digit of order number .2:yy NCS 3060 R80B, blue
Final digit of order number .9:yy RAL 7016 anthracite grey
yy ESD version: Note: ESD only in color variant .1 (light grey) Final digit of order number .1:
yy RAL 7035 anti-static, light grey
yy With cable entry
yy ESD model in accordance with EN 100015
yy Material/Finish
yy Sheet steel, powder-coat textured
yy Supply schedule
yy 1 Rear panelyy Mounting material
yy How supplied
yy Flat-packed kit
Knürr MetraMobil® Rear Panel
MET00033
MET00037
MET00021
W H D d ESD Order no. UP
380 900 P (.1) 00.701.010.x 1 unit
380 1120 00.701.011.x 1 unit
380 900 • 00.701.110.1 1 unit
380 1120 • 00.701.111.1 1 unit
yy Consists of:
yy Di-Strip socket strip, 4-way, without switchyy Strain reliefyy Two cable reel elements
yy Supply schedule
yy 1 Cable management setyy Mounting material
yy How supplied
yy Flat-packed kit
Knürr MetraMobil® Cable Management Set
Order no. UP
P 00.701.050.1 1 unit
yy Load rating, 750 N per castor, Ø 125 mm
yy Color
yy RAL 9011, graphite black
yy Supply schedule
yy 4 smooth-running castors, yy 2 with brake
Knürr MetraMobil® Castor Set
ESD Order no. UP
00.701.965.9 1 unit• 00.128.975.9 1 unit
28
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
Mobile Equipment CarriersKnürr SynergyCart® Advanced Page 29 to 35
29
Knürr SynergyCart® AdvancedStrong points
yy The ergonomical equipment carrier
yy Mobile, height-adjustable LCD workstationyy Supports computers, bar code scanners and printersyy Test trolley in production / workshopyy Warehouse picking, scanner cartsyy Ideal for automotive and industrial projects where small space-saving trolleys with cable management are requiredyy Fully assembled and ready for useyy Tested according to the latest standards and regulationsyy Stable, attractive base in 2 versions:yy Synergy Cart Advancedyy Synergy Cart Advanced MetraLine
yy Characteristics
yy Flexible height adjustable by gas pressure column - 750-1040 mmyy Comfortable working in sitting or standing position
yy Easy handling with in the worktop integrated handlesyy Ergonomic lever for safe and comfortable height adjustmentyy Spacious and stable worktop, made of 15 mm HPL solid core material (width 695 mm, depth 570 mm) for loads up to 16kgyy Either with single or double steering rollersyy Easy movement on uneven floors or above doorsills through ø 125 mm smooth running castorsyy Fixation by two castors with locking mechanismyy No scratches on doors, walls and furniture due to integrated plastic bumper capsyy Simple, individual assembly of accessory components, e.g. drawers and storage shelves on the vertical aluminum profileyy User-friendly cable management with plenty of space for cables, sockets and transformers
SYN20210
SYN20213
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
30
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
Many application scenarios demand
a project specific solution.
When planning, manufacturing, and
assembling your individual requirements,
Knürr takes multiple factors into account,
including your personal requirements as
Individual Project Solutions – Contact Us!
750
- 104
0 m
m75
0 - 1
040
mm
SYN20210
SYN20212
SYN20211
SYN20213
SynergyCartAdvanced Metra Line
SynergyCartAdvanced
Easy handlingwith integrated
handholds
Keyboard drawer for secure
storage
Flexible height adjustmentfrom 750 mm to 1040mm
Covered cable guiding
with integrated cable duct
Spacious desktopadapted to your project
Solid base space for various devices
Ergonomic handle-for safe and
comfortable height adjustment
Comprehensive range of accessories
Vertical T-Slots for flexible installation
Gas lift columndifferent models available
well as legal guidelines. Industrial designers
and Technicians closely cooperate at our
product design department to bring form
and function in line. The resulting designs
are regularly tested by means of 3D-CAD
models and you are welcome to incorporate
your ideas any time. Any required proto-
types are manufactured by experts who
translate your wishes and ideas into a real
product.
31
yy Base unit in Synergy designyy Large leg spaceyy Double castors in Ø 125mm
yy Finish
yy .1 RAL 7035, light greyyy .9 RAL 7021, dark grey
yy Large base unit for different equipment like printersyy Smooth running castors in Ø 125mm
yy Finish
yy .1 RAL 7035, light greyyy .9 RAL 7021, dark grey
yy Supply schedule
yy 1 base unit with gas lift column and aluminum profiile coveryy 4 Double castors (2 lockable)yy 1 worktop with integrated handles
yy How supplied
yy Fully assembled
yy Supply schedule
yy 1 base unit with gas lift column and aluminum profiile coveryy 4 castors (2 lockable)yy 1 worktop with integrated handles
yy How supplied
yy Fully assembled
Knürr SynergyCart ® Advanced
Knürr SynergyCart ® Advanced Metra Line
MOB20135
MOB20136
W H D d Order no. UP
00.705.510.x 1 unit
W H D d Order no. UP
00.705.500.x 1 unit
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
32
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
yy Toolless installationyy Clean cablingyy Ready for installation of Knürr DI-Strip
PDU‘s (4 sockets)
yy Material / Surface
yy RAL 9006 White aluminum
yy Supply schedule
yy 1 Cable Duct
Knürr SynergyCart ®Cable Duct
Knürr SynergyCart ®Keyboard Drawer
yy Creates space on your worktopyy Legroom is always grantedyy Keyboard drawer latches in closed
and extended positionyy Easy retrofit
yy Material / Surface
yy Sheet steel, powder-coated
yy Color
yy RAL7035 light grey
yy Dimensions
yy Width: 536 mmyy Height: 56 mmyy Depth: 276 mm
yy Max. usable dimensions
yy Width: 500 mmyy Height: 45 mmyy Depth: 218 mm
yy Supply schedule
yy 1 Keyboard draweryy Mounting material
yy How supplied
yy pre-assembled
MOB20138
MOB20139
d Model Order no. UP
Keyboard drawer 00.705.550.1 1 unit
d Model Order no. UP
Cable Duct 00.705.555.9 1 unit
33
yy Low Center of Gravityyy Securely holds transformers, batteries etc.yy Lateral and bottom cooling vents
yy Material / Surface
yy .1: RAL 7035 light greyyy .9: RAL 7021 dark grey
yy Dimensions (usable)
yy Width 290 mm,yy Depth 320 mmyy Height 104 mm
yy Supply schedule
yy 1 Transformer Tray
Knürr SynergyCart ®Transformer Tray
yy Non pinch and anti tangle cable guidingyy Defined cable radii
yy Material / Surface
yy Plastic black
yy Supply schedule
yy 1 Cable Chain
yy Note
yy Cable chain installation works only together with cable duct
Knürr SynergyCart ®Cable Chain
MOB20140
MOB20141
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
d Model Order no. UP
Cable Chain 00.705.560.9 1 unit
Model Order no. UP
Knürr SynergyCart ® Advanced Metra Line 00.705.565.x 1 unitKnürr SynergyCart ® Advanced 00.705.570.x 1 unit
34
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
ACC20029
Single connector
Maximum weight per monitor (kg)
Type D(short)
Type E(180 mm)
Type F(250mm)
Type G(360mm)
Height 4001x single
connector6 kg 6 kg 6 kg 6 kg
Load bearing matrix for add-on monitor posts
yy Monitor arms for mounting flat screens with the 75 and 100 mm VESA mountingyy With cable management
yy Supply schedule
yy 1 flat screen supportyy Type E, F and G come with height
adjustment plateyy Mounting material
yy How supplied
yy Flat-packed kit
yy Finish / Material Type D-G
yy Swivel arm: die-cast aluminiumyy Adapter plates: sheet steelyy Gas spring arm covers: plasticyy Metal parts: powder-coated, RAL 9006,
White aluminum, smoothyy Gas spring arm housing – type B/C: yy Plastic, light grey
Monitor Arms
CIC20031Type D
CIC20032Type E
CIC20033Type F
CIC20034Type G
Single connector KON20086
yy Please note
yy Monitor arms for monitor poles come without mounting adaptors for functional rails. In order to install with monitor poles, please also order single connector.
Model Height adjustment plate
Load-bearing capacity Order no. UP
Type D, for Pole 6 Kg 01.316.250.9 1 unitType E, for Pole • 6 Kg 01.316.251.9 1 unitType F, for Pole • 6 Kg 01.316.252.9 1 unitType G, for Pole (2x180mm) • 6 Kg 01.316.253.9 1 unitSingle connector 01.316.224.9 1 unitAdd on Monitor Poles (H400) 01.316.233.9 1 unit
yy Please observe the leverage ratio and load bearing capacity from the following table of add-on monitor posts.
35
yy Can be ergonomically mounted at any height, steplessyy With drawer safety catch against
unintentional opening
yy Material
Main unit and drawer: yy Sheet steel, powder-coated
Handle: yy Plastic, black
yy Finish
yy .1: RAL 7035 light greyyy .9: RAL 7021 dark grey
yy Dimensions
yy width, 505 mm; depth, 350 mm; height, 110 mm drawer width, 425 mm; depth, 265 mm; height, 90mm
yy Load rating
yy Housing, 10 kg; extension, 2 kg
yy Supply schedule
yy 1 drawer moduleyy Mounting material
Knürr SynergyCart® Drawer
yy Can be ergonomically mounted at any height, steplessyy Torsion-free and stableyy With recessed surface to prevent sliding
and for anti-slip mats
yy Material
yy Sheet steel, powder-coated
yy Finish
yy .1: RAL 7035 light greyyy .9: RAL 7021 dark grey
yy Load rating
yy 15 kg
yy Supply schedule
yy 1 Shelfyy Mounting material
Knürr SynergyCart® Shelf
MOB20137
MOB20137
W H D Order no. UP
500 110 300 00.705.275.x 1 unit
W T Order no. UP
500 300 00.705.225.x 1 unit
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
36
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
Mobile Equipment CarriersKnürr Cabinet Cart Page 37 to 44
37
yy Aesthetics
yy Clear lines and curved shapes for a compact and modern lookyy Rear and Side panels with square hole design perforation provide additional functions, e.g. for ventilation and hook-in accessoriesyy Space-saving cabling area, aesthetically integrated in rear
yy Functionality
yy Suitable for the most varied areas of application: PC or printer station, IT-cart, logistics or laboratory as well as workshops or assembly and manufacturing applicationsyy Space-saving footprint (710 x 870 mm)yy Already implemented cable management
yy Features
yy Maximum static load rating:yy Overall load rating of each cabinet cart: 1500 Nyy per Castor: 750Nyy Surface load of worktop: 400 Nyy Distributed load of shelf: 400 N
Materialyy All Side panels, shelves, or similar are made from powder coated sheet steelyy Worktop out of high quality multi layer chipboard with HP laminate surfaces, which enable high load ratings and ensure long durability.yy Bumpers (main frame cover) out of special plastics
yy Available accessories
yy Toolholderyy Flat screen holder yy Handle yy Socket strip (e.g. 6 way+switch)
yy Variability
yy Numerous individual configurations possibleyy All modules can be combined and mounted in the easiest possible wayyy Simple and quick adjustment without special tools
Knürr Cabinet Cart - RolloStrong points
MOB20142
MOB20143
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
38
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
yy Knürr Cabinet Cart toolholder can be mounted easily at the rear panel, via square hole design perforationyy Lockable roller blind dooryy Vibration-free and noiseless transport
with special rubber smooth-running castors Ø 125mm (4 casters, 2 lockable)yy Bumpers, made out of special plasticsyy Cabinet Cart handles (bow shaped) can
be mounted on left- and rightside
yy Color
yy Color combination .9 (as shown in the picture)
yy Supply schedule
yy 1 basic frame incl. 4 castersyy 2 vertical extrusions (rear)yy 2 side panelsyy 1 rear panelyy 1 top coveryy 1 shelf
yy How supplied
yy fully assembled
yy Castors
yy RAL9011, graphite black
Knürr Cabinet Cart - Rollo
MOB20142
Order no. UP
00.713.200.9 1 unit
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
= assemble to order (shipped within 10 working days)
Caution: In case of larger orders , delivery times may increase.
P
39
Toolholder
yy Toolholder / Accessoiresyy To hook into square hole perforation of
side and rear panelsyy Impact and scratch-proof plastic coatings yy Base plate thickness 1,5 mm (embossed)yy Including an original locking screw
yy Material
yy Plastic
yy Color
yy RAL 9011, graphite black
Hook-On BlockFor holding test pins
yy Supply schedule
yy 1 hook-on blockyy Mounting material
yy Locking screw: yy The polyamid locking screw prevents
side and rear panels from scratches
MOB20155
MOB20156
MOB20157
MOB20158
MOB20159
W H D Order no. UP
220 120 55 P 00.701.090.9 1 unit
Description Order no. UP
Toolholder - Double Hook 50 mm 00.713.106.0 1 unitMachine holder - round shaped 60 mm 00.713.106.1 1 unitCableholder 150 mm 00.713.106.2 1 unitLocking screw - 100 pcs 00.713.106.3 1 unit
40
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
Handle
Socket Strip 6-way incl. Switch
Socket Strip 4-way
yy Socket Strip (Schuko) 6-way incl. switch and mounting material
yy Socket Strip (Schuko) 4-way and mounting material
DOS20045
without switch
L
DOS20020
Flat screen holder
yy Monitor arms for mounting flat screens with the 75 and 100 mm VESA mounting
yy Supply schedule
yy 1 flat screen supportyy 1 Monitor pole 400 mmyy Mounting material
yy How supplied
yy Flat-packed kit
yy Finish / Material
yy Swivel arm: die-cast aluminiumyy Adapter plates: sheet steelyy Metal parts: powder-coated, RAL 9006,
White aluminum, smooth
yy Handle (bow shaped)
yy Material
yy Aluminium, welded
yy Color
yy RAL 9011, graphite black
yy Supply schedule
yy 1 Handleyy Mounting material
MOB20160
MOB20161
H Order no. UP
400 P 01.316.229.9 1 unit
W H D Order no. UP
420 25 75 00.713.108.0 1 unit
L Order no. UP
483 00.713.110.0 1 unit
L Order no. UP
333 00.713.110.5 1 unit
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
= assemble to order (shipped within 10 working days)
Caution: In case of larger orders , delivery times may increase.
P
41
Page 42 to 45
Mobile Equipment CarriersAccessories(for DacoMobile and MetraMobil)
42
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
yy For clipping into T-slots at any positionyy For mounting chassis rails and other
components
yy Material
yy Steel, St 1203 Spring band, Nirosta 4310
yy Supply schedule
yy 50 spring nuts
Spring nuts M5 and M6
MEC00060
yy 3-joint with manual clampyy With cable/hose holder
Universal Arm
MOB20013
yy Supply schedule
yy 1 universal arm incl. adapter
Antistatic Castor Set
yy Load capacity – 90 kg
yy Color
yy RAL 9011, graphite black
MOB20083
yy Supply schedule
yy 4 smooth-running castorsyy 2 with brake
W H D Model Order no. UP
M6 P 01.350.405.9 1 unit
M5 P 01.350.431.9 1 unit
W H D Order no. UP
00.306.950.1 1 unit
Type Color Diameter Order no. UP
ESD Black 125 P 00.128.975.9 1 unit
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
= assemble to order (shipped within 10 working days)
Caution: In case of larger orders , delivery times may increase.
P
43
Cable routing setMounting on the vertical extrusions
MOB00331
yy Material
yy Plastic
yy Color
yy RAL 7035 light grey
yy Supply schedule
yy 2 Cable windersyy Mounting material
Cable WinderFor up to 5 m of cable
MOB00338
NTC: For switch-on peak limit are NTCs in the input power circuit before the transformer.
Basis of EC Declaration of Conformity in acc. with Direc-tive 93/42 EEC, Annex I:
yy EN60601-1, EN60601-1-1yy EN60601-1-1-2 (EMC)yy EN14971
yy Supply schedule
yy 1 isolating transformeryy 1 mains cable, 2.5 m with protective
contact plug
yy How supplied
yy Flat-packed kit
yy Note
yy Additional versions available on request
Isolating Transformers
MOB20099
W H D Order no. UP
500 P 00.101.001.9 1 unit
W H D Order no. UP
P 00.306.957.1 1 unit
yy Material
yy Plastic
yy Color
yy RAL 7035, light grey
yy Supply schedule
yy 1 cable routing setyy Mounting material
W H D Switch-on current limiter Type Power (W) Order no. UP286 110 312 NTC IMed 2000E 2000 00.100.842.9 1 unit
44
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
yy Finish
yy RAL 7035 light grey
yy Supply schedule
yy 1 Bottle holderyy 1 Retaining beltyy Mounting material
Gas Bottle HolderBottle holder for 5 L or 10 L bottles up to max. Ø 150 mm
MOB00042
yy Material
yy High-grade steel 25x10 mm
yy Supply schedule
yy 1 Standard railyy Mounting material
Standard RailLength, 460 mm
MOB00232
yy Monitoring and alert unit for secondary isolation resistanceyy For use in combination with isolating
transformers IMed senesyy Precise warning of isolating failures
yy Technical data
yy 230 VAC, IP 40
yy Material
yy Laminated 3-layer particle board Folding brackets: sheet steel Finish: RAL 7035 light grey
yy Delievery Schedule
yy 1 side shelfyy 1 set of folding bracketsyy Mounting hardware
Side ShelfFor Knürr DacoMobile® and Knürr EliMobil®
MOB20053
In case of defect the ELG signals an optical and acous-tic warning. The resistance is monitored. If the minimum level of 50 kOhm is short fallen, an optical (LED) and acoustic (Beeper) signal is triggered. The ELG is directly connected to one of the output plugs of the IMED trans-formers. Its function is solely to signal isolating failures.
The ELG is exclusively approved in combination with the Noratel IMED transformers.
MOB20100
Leakage Detector Set
L W H Order no. UP
192 32 56 00.100.841.9 1 unit
W H D Order no. UP
00.100.075.1 1 unit
W H D Model Order no. UP
460 25 10 Knürr DacoMobile® 00.128.016.1 1 unit460 25 10 Knürr EliMobil® 00.306.940.1 1 unit
W H D Order no. UP
300 400 00.101.250.1 1 unit
Dimensions in mm: W = Width HU = Standard height H = Height unit, 1 HU = 44.45 mm D = Depth 19”= 482.6 mm, h = Installation height (ideal for 19“ components d = Useful depth in acc. with DIN 41494) L = Length UP = Unit of packaging kg = Weight
Conversion: 1 inch = 25,4 mm Replace „x“ with the number of your color choice
= assemble to order (shipped within 10 working days)
Caution: In case of larger orders , delivery times may increase.
P
45
yy Can only be used in combination with standard rails, BN 00.128.016.1 or B/N 00.705.068.x SynergyCart® holder for infusion standsyy 4 Hooksyy Chrome-platedyy Height adjustableyy Width, approx. 110 cm
yy Load rating
yy 2 kg per hook
yy Supply schedule
yy 1 Serum holder including mounting (without standard rails)
MOB00339
yy Note
yy Only for Knürr DacoMobile® and Knürr EliMobil®
yy Material
yy Plastic
Hook-On BlockFor holding test pins
MOB00337
yy Color
yy RAL 9011, graphite black
yy Supply schedule
yy 1 hook-on blockyy Mounting material
MOB20061
IV-Pole
W H D Order no. UP
00.306.955.0 1 unit
W H D Order no. UP
P 00.701.090.9 1 unit
yy For mounting between the Knürr Mobile vertical extrusionsyy Sturdy and stable Knürr TFT Adapter
connection
yy Note
yy TFT adapters are not included in the supply schedule, please order separately
yy Material
yy Extruded aluminum extrusionsyy Sheet steel mounting plates
Multi-Functional Extrusions for Flat Screen Supports
yy Finish
yy Metal parts – powder-coated, RAL 9006, white aluminum
yy How supplied
yy Flat-packed kit
yy Supply schedule
yy 2 Funktional railsyy Mounting material
W Model Order no. UP
496 Knürr DacoMobile® 00.101.007.9 1 unit596 Knürr DacoMobile® 00.101.008.9 1 unit500 Knürr MetraMobil® 00.701.055.9 1 unit450 Knürr EliMobil® 00.306.980.9 1 unit550 Knürr EliMobil® 00.306.981.9 1 unit
46
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
Take advantage of our expert knowledge,
which we have been gathering for de-
cades in numerous customer projects in
various industries.
Our project managers are your contact
partners. They are the interface to you
and are responsible for the project plan-
ning in accordance with your individual
requirements profile. Depending on the
complexity of the task at hand, they put
together a professional team of special-
ists from the most diverse disciplines.
Numerous factors are incorporated –
from the creation of a list of functional
specifications, budgeting and deadline
Right from the very beginning
planning, through to special design spec-
ifications and technical integration, right
on through to compliance with standards
and guidelines.
During the product design phase, in-
dustrial designers and technicians work
closely together to harmonize form and
function. With the assistance of 3D-CAD
models, you check the result and can in-
tegrate your suggestions at any time.
Prototyping is also firmly in the hands of
experts who are hard at work incorporat-
ing your requests and suggestions into
an initial specific product.
PROJECT MANAGEMENT
47
Using the most modern CAD applica-
tions, we design your products, which
set new standards in terms of tech-
nology and aesthetics. On the basis of
the planned details, 3-D views, design
studies and volume models emerge,
which represent the most realistic state
of development progress and enable
modifications in line with your wishes at
absolutely any time.
Design and function
Your company-own corporate design is
also integrated with our proposals for
materials and color. Ultimately we ensure
a smooth technical and technological
integration while complying with UL,
CSA, VDE or TÜV/GS standards. Only
when these stages have been fully
completed, can the first prototype be
produced.
DESIGN
48
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
After production release by the
customer our sophisticated logistics concepts go into operation.
Customized planning procedures are
integrated and smoothly implemented in
our Supply ChainManagement.
We produce application-specific equip-
ment trolleys in ultra-modern industrial production procedures.
Exemplary results
And in the production phase our
employees guarantee the best possible
end product with their long years of
experience in parts production,
packaging and shipping, supported
by our integrated quality assurance procedures.
This also includes extensive packaging expertise, equipped for global shipping
and the toughest environmental condi-
tions.
PRODUCTION AND LOGISTIC
49
Our standard modules mean the possi-
bilities for unique originals are practically
unlimited.
Help us with your requests! Ask us
about your original and stand out on the
market with your equipment
trolley with customized design,
harmonized with your company image
(CI/CD). Our expert Design and Technology Team will be happy to
optimally and specifically meet all
customerspecific requirements –
assuming the appropriate batch sizes.
OEM
“Avail of our long years of experience,
which we use to ergonomically,
technically and optimally incorporate
our mature and flexibly adjusted product
platforms and components into your
individual solution.”
INDIVIDUAL SOLUTION
50
VERTIV™ KNÜRR® MOBILE EQUIPMENT CARRIERS
Notes:
51
P
REM IU M Q UALIT
Y
G
UAR A NT E E D
LIFTIN G CYC LES
Highest quality is guaranteed
10 years warranty on surfaces and
mechanics
Up to 5 years warranty for lifting columns with up to
10,000 lifting cycles
100 10% +
Our Quality Promise:
Vertiv with Knürr Control Room Infrastructure is worldwide known as competent and reliable partner for holistic control room solutions and mobile equipment carrier. The ergonomically designed products are inter-nationally in use and convince in demanding 24h-Mission-Critical Control Room environment of multiple industrial sectors.
Learn more about Control Room Infrastructure solutions and services at www.VertivCo.com and www.technical-furniture.com.
Ergonomically designed products and solutions from a single source
Vertiv Integrated Systems GmbHKnürr Control Room Infrastructure
Mariakirchener Straße 3894424 Arnstorf
GermanyT +49 8723 28 0
F +49 8723 28 [email protected]
www.VertivCo.comwww.technical-furniture.com
VertivCo.com | George Curl Way, Southampton, SO18 2RY, VAT Number: GB188146827
© 2018 Vertiv Co. All rights reserved. Vertiv™, the Vertiv logo, Knürr DacoMobile®, Knürr MetraMobil®, Knürr SynergyCart® are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names, trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.
09.991.042.0.000001 • MKA4LOUKcarts Rev.1-08/2018