CONTRACTOR SUPPORT MANUAL · 4 pavement on synthetic base - cross-section joint fill aggregate - fully consolidated techo-bloc paving stone overlay - astm c936, sca 231 - 45-100 mm

CONTRACTOR SUPPORT MANUAL

2

Table of Contents

Featured Project Plans and Dimensions .......................................................... 3

Pavement on Synthetic Base - Cross-section ................................................4

Soil Amendment - Raised Patio Cross-Section ..............................................5

Porous Concrete Overlay - Cross-Section ......................................................6

Heated Pavement on Synthetic Base - Cross-section ................................ 7

Borealis Wall as Pavement - Cross-Section ....................................................8

Wall Construction on Synthetic Base - Cross-Section ................................9

Pacific Pool Coping 90o Template ..................................................................... 10

Borealis + Graphix Wall Kitchen ......................................................................... 11

Mini-Grill Island with Raffinato Steps ............................................................... 16

Full-size Grill Island with Raffinato Steps ........................................................22

Raffinato Steps + Graphix Wall Wood-Fired Oven .....................................29

Borealis Wall Wood-Fired Oven ......................................................................... 36

Röcka Wood-Fired Oven ......................................................................................43

Borealis + Graphix Fire Feature ..........................................................................56

Raffinato Steps Linear Fire Feature ....................................................................61

Graphix Wall Fire Feature .....................................................................................67

Borealis Firepit ........................................................................................................... 73

Röcka Firepit ..............................................................................................................82

Travertina Firepit .......................................................................................................89

Borealis + Graphix Wall Water Feature ............................................................98

Borealis Water Feature ........................................................................................... 103

Röcka Wall Water Feature ..................................................................................... 108

Borealis + Graphix Wall Bench-Long ............................................................... 113

Borealis + Graphix Wall Bench-Short ............................................................... 118

Raffinato Steps Bench ............................................................................................ 123

Graphix Table ............................................................................................................ 127

Borealis Stepping Stone Table ............................................................................. 132

Hardscaper’s Master Tool List .............................................................................. 136

Phone 1.877.832.4625 | [email protected] | techo-bloc.com/support-manual

FEATURED PROJECT PLANS AND DIMENSIONS

Hexa Chestnut Brown HD2

Hexa Beige Cream HD2

Fountain

Grass

Composite Wood Deck Platform

AC

Decorative Stone

A01

A02

02

04

01

HOUSE

03

Fence in charge by customer

Fence in charge by customer

05

Artifical Grass Putting Green

AA

A01

10'-8

"

2

3

4

01005

01001

PLAN

NOTATION PLAN

001

Account No.Project No.Scale: NTS

::

Issue Code Issue Description By Chk Date

PRE - Preliminary RFQ - Request for Quote C - Construction

DIMENSIONS :All dimensions are in inches unless otherwise noted. Donot scale from this drawing.

Verify all dimensions on site prior to construction.

CIVIL, STRUCTURAL, HYDRAULIC, ELECTRICALAND SPECIALIST WATER FEATURE WORKS :Refer to specialist and consultant's drawings for allinformation contained within these documents relating toand nominated as specialist and consultant work.Specialist and consultant drawing information containedin the landscape documents are indicative only and notfor construction or certification purposes.

Copyright TECHO-BLOC. Reproduction of thewhole or part of the document constitutes aninfringement of copyright. The information, ideas andconcepts contained in this document are confidential.The recipient(s) of this document is/are prohibitedfrom disclosing such information, ideas and conceptsto any person without the written consent of thecopyright holder.

c

000065MEDIA PROD-02-000003

Please note that any changes or alterations (such asmaterial changes, labor, design, etc.) to a displayshould be communicated directly to the Techo-BlocMarketing Team.

FREVISION

Dealer Approval:

Date:

Signature:

LPVSLPreliminary Design&BudgetPREA 2019-07-18

Dealer Name : SHOWCASE 2020INSTALLATION PROJECT

PAVER START POINT

STEPS AND BORDERS

PAVERS AND SLABS#

A#

WALLS / FEATURE

1

Borealis table

1

2

3

3

4

5

5

Blaze 20� CAST ALUMINUM KAMADO

2x Square Burner Warming trends CFBST240 NG

AquaScape Fountain

Blaze Grill gas 32'' 3-BURNER LTE GAS GRILLSKU: BLZ-4(LP/NG)

01006

00801

00701

00901

Hexa Chestnut Brown HD2

Hexa Beige Cream HD2

Wood patio can be removedto have access underneath

A01

A02

02

04

32'-9

"

18'-6

"4'

-0"

10'-3

"

2'-6

"5'

-6"

10'-6

"

2'-6"

13'-5

1/2

"

17'-4

"4'

-1 1

/2"

23'-10"16'-0"

3'-4"

3'-4

"

1'-11 5/8"

01

1'-9

"

03

3'-1 3/4"

3'-2

1/2

"

Golf section area

16'-7

"

AA

A01

38'-3 3/8"

23'-4"14'-11 1/2"

9'-4 1/8"8'-7 7/8"4'-11 1/2"

2'-1

0 1/

2"

10'-8

"

NOTATION PLAN

002

Account No.Project No.Scale: NTS

::

Issue Code Issue Description By Chk Date

PRE - Preliminary RFQ - Request for Quote C - Construction

DIMENSIONS :All dimensions are in inches unless otherwise noted. Donot scale from this drawing.

Verify all dimensions on site prior to construction.

CIVIL, STRUCTURAL, HYDRAULIC, ELECTRICALAND SPECIALIST WATER FEATURE WORKS :Refer to specialist and consultant's drawings for allinformation contained within these documents relating toand nominated as specialist and consultant work.Specialist and consultant drawing information containedin the landscape documents are indicative only and notfor construction or certification purposes.

Copyright TECHO-BLOC. Reproduction of thewhole or part of the document constitutes aninfringement of copyright. The information, ideas andconcepts contained in this document are confidential.The recipient(s) of this document is/are prohibitedfrom disclosing such information, ideas and conceptsto any person without the written consent of thecopyright holder.

c

000065MEDIA PROD-02-000003

Please note that any changes or alterations (such asmaterial changes, labor, design, etc.) to a displayshould be communicated directly to the Techo-BlocMarketing Team.

FREVISION

Dealer Approval:

Date:

Signature:

LPVSLPreliminary Design&BudgetPREA 2019-07-18

Dealer Name : SHOWCASE 2020INSTALLATION PROJECT

PAVER START POINT

STEPS AND BORDERS

PAVERS AND SLABS#

A#

WALLS / FEATURE

3Phone 1.877.832.4625 | [email protected] | techo-bloc.com/support-manual

4

PAVEMENT ON SYNTHETIC BASE - CROSS-SECTION

JOINT FILL AGGREGATE - FULLY CONSOLIDATED

TECHO-BLOC PAVING STONE OVERLAY - ASTM C936, SCA 231 - 45-100 mm THINCKNESS

EDGE RESTRAINT - PVC, ALUMINIUM, STEEL ANGLE - MASONRY ANCHOR 1.5-2'' X 14'' - 8'' O.C.

SUB-GRADE SOIL

GATORBASE

TECHO-BLOC EDGE

GEOTEXTILE - WOVEN, NON-WOVEN

Gator Base Unit

- Equivalent to 288 lbs (130 kg) of crushed stone- Replaces 6 in (15 cm) of compacted crushed stone- Evacuates water through the channels- Manufactured using lightweight high-density polypropylene- Environment-friendly and 100% recyclable- Extremely durable, will not degrade in the ground- Designed with LOCK-N-GO tongue and groove system- Gator Base Insulation has an R-Value of 3.6 (per inch thickness)- Will significantly reduce the number of freeze and thaw cycles

NOT TO SCALE

SETTING BED- COMPACTED SAND, 1/2'' THINCKNESS

CROSS-SECTIONPAVEMENT ON SYNTHETIC BASE


5

SOIL AMENDMENT

Raised Patio Cross-Section

3REDEFINING LANDSCAPE PRODUCTS


CLIENT:

DATE:

DESIGNER(S):

COMPASS CREATIVE STUDIO INC

201-1040 south service rd

stoney creek, on L8E 6G3

www.compasscreative.ca

Techo Bloc

August 2018

Nick Tenhage

CMYK

20/40/65/2

12/22/33/1

0/0/0/90

Door Sill

Masonry Veneer with Unobstructed Weepholes

Classified, amended, compacted soil subgrade

Pavement bedding layer ASTM #8

Paving Slabs or Pavers

Intermittent layer of Biaxial Geogrid (positioned midway

through base, 3” above, 3” below)

Geotextile

Optional Levelling Bed 1” thick of ASTM #8

4” min. Diameter Perforated Drain Pipe (near bottom, where appropriate, to manufacturer’s/engineer’s specifications)

ASTM #57 Backfill (every 8”)

Biaxial Geogrid

Concrete Foundation Wall with Basement

Air Gap

Ra�nato Step

ASTM #57 (½" & ¾” Clean Stone) Base (min. 6” thick, extend 6” beyond the heel and toe of block, and accommodate min. 6” of embedment)


CHEMICAL AMENDMENT

Clay particles with water

Water releasedBearing ability increases

GRADATION AMENDMENT

Clay particles Clay with clean stoneBearing ability increases



CLIENT:

DATE:

DESIGNER(S):





Techo Bloc

August 2018

Nick Tenhage

CMYK

20/40/65/2

12/22/33/1

0/0/0/90

Door Sill







Geotextile




Biaxial Geogrid


Air Gap

Ra�nato Step



CHEMICAL AMENDMENT



GRADATION AMENDMENT




CLIENT:

DATE:

DESIGNER(S):





Techo Bloc

August 2018

Nick Tenhage

CMYK

20/40/65/2

12/22/33/1

0/0/0/90

Door Sill







Geotextile




Biaxial Geogrid


Air Gap

Ra�nato Step



CHEMICAL AMENDMENT



GRADATION AMENDMENT



Clay particles

Water releaded Bearing ability increases

Clay with clean stone Bearing ability increases

Chemical Amendment

Gradation Amendment


6

POROUS CONCRETE OVERLAY CROSS-SECTION



CLIENT:

DATE:

DESIGNER(S):





Techo Bloc

August 2018

Nick Tenhage

CMYK

20/40/65/2

12/22/33/1

0/0/0/90

Porous Concrete Overlay Cross-Section


HEATED PAVEMENT ON SYNTHETIC BASE - CROSS-SECTION


TECHO-BLOC PAVING STONE OVERLAY - ASTM C936, SCA 231 - 30 mm THICKNESS

EDGE RESTRAINT - PVC, ALUMINUM, STEEL ANGLE - MASONRY ANCHOR 1.5-2'' X 14'' - 8'' O.C. - PRECAST CURB/EDGE

SUB-GRADE SOIL


HYDRONIC OR ELECTRICHEATED PAVEMENT SYSTEM

GATORBASE

- 1'' THICKNESS BELOW THE HEATING ELEMENT- 1" THICKNESS ABOVE THE HEATING ELEMENT

TECHO-BLOC EDGE

COMPACTED GRANULAR BASE #8 - 1'' THICKNESS

NOT TO SCALE

GRANULAR BASE AASHTO # 8

CROSS-SECTIONHEATED PAVEMENT

ON SYNTHETIC BASE


8

BOREALIS WALL AS PAVEMENT - CROSS-SECTION

JOINT FILL AGGREGATE - FULLY CONSOLIDATEDEDGE RESTRAINT

- PVC, ALUMINUM, STEEL ANGLE - MASONRY ANCHOR 1.5-2'' X 14'' - 8'' O.C.

SUB-GRADE SOIL

GATORBASE

TECHO-BLOC BOREALISWALL UNIT


NOT TO SCALE

SETTING BED- COMPACTED SAND, 1/2'' THICKNESS

Gator Base Unit


SETTING BED- AASHTO #8s or ASTM C33*Recommended* 1" THICKNESS

CROSS-SECTIONBOREALIS WALL AS PAVEMENT

ON SYNTHETIC BASE


RAISED PATIO ON SYNTHETIC BASE - CROSS-SECTION


TECHO-BLOC PAVING STONE OVERLAY - ASTM C936, SCA 231 - 45-100 mm THICKNESS

EDGE RESTRAINT - PVC, ALUMINUM, STEEL ANGLE - MASONRY ANCHOR 1.5-2'' X 14'' - 8'' O.C.

SUB-GRADE SOIL

GATORBASE

TECHO-BLOC EDGE


Gator Base Unit


NOT TO SCALE


#57 CLEAN STONE ORRECYCLED CONCRETE

CROSS-SECTIONRAISED PATIO ON SYNTHETIC BASE


TECHO-BLOC PAVING STONE OVERLAY - ASTM C936, SCA 231 - 45-100 mm THICKNESS

EDGE RESTRAINT - PVC, ALUMINUM, STEEL ANGLE - MASONRY ANCHOR 1.5-2'' X 14'' - 8'' O.C.

SUB-GRADE SOIL

GATORBASE

TECHO-BLOC EDGE


Gator Base Unit


NOT TO SCALE


#57 CLEAN STONE ORRECYCLED CONCRETE

CROSS-SECTIONRAISED PATIO ON SYNTHETIC BASE


10

PACIFIC POOL COPING 90º TEMPLATE

4"

1'

8"

4"8"

4"

4"4"

1'

PACIFIC POOL COPING90 DEGREE CORNER

QUANTITY OF MATERIALS REQUIRED

Pacific bullnose cap : 6 pcs


BOREALIS + GRAPHIX WALL COUNTER / BAR / GRILL ISLAND (LENGTH: 8’ 8”)

Build time*: 6 hr

Staff: 2

Total labor hours: 12-14 hr

Constructed on a traditional or porous concrete slab for stability and

uniform seasonal movement, this grill island is the perfect balance of

modern and traditional building material textures.

*excludes base construction and subcontractor time


12

** Porous concrete mix design: 4 parts aggregate to 1 part Portland cement, mix carefully with just enough water to hydrate the cement, but not create a thick paste. The mix should hold together after being squeezed in your hand and should have a slight shine to it.

Borealis + Graphix Wall Counter / Bar / Grill Island

Material and Labor Checklist

Material Name Unit Cost Quantity Total Cost

ASTM #57 or RC-57 (¾” clean stone or recycled concrete) $____ ___ $____

Portland Cement (for slab foundation construction)** $____ ___ $____

Concrete forms $____ ___ $____

Grade Pins $____ ___ $____

10 units - Borealis Wall $____ ___ $____

42.64 sq.ft. (104 units) - Graphix Wall $____ ___ $____

2 Pave Tool Quick-E Vents (2.95” height) - required for grill ventilation

$____ ___ $____

Access doors - optional $____ ___ $____

Grill or other appliance $____ ___ $____

Countertop with exterior dimensions 8’10” x 2’10” $____ ___ $____

Flexlock Ultra adhesive $____ ___ $____

Staff Type Labor Cost Labor Hours Total Cost

Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____

TOTAL MATERIALS COST: $______

TOTAL LABOR COST: $______

GRAND TOTAL COST: $______


ཎ Run conduits for gas, electricity and/or water services

ཎ With a certified and bonded gas technician, run natural gas or propane line

ཎ Installation must be approved by local inspector

ཎ Install minimum 4” layer of ASTM #57 or RC-57 aggregate

ཎ Install concrete forms, secure with grade pins

ཎ Mix and pour porous concrete slab (minimum 6” thickness)

ཎ Cover with plastic sheet and allow minimum 6 hr cure time

ཎ Remove grade pins and concrete forms

ཎ Install first course of Borealis Wall ensuring units are set square and level

ཎ Install courses of Graphix Wall, marking and cutting as per plan (smooth faces out to replicate

image above)

ཎ Measure and cut Graphix Wall units to accommodate optional access door

ཎ Adhere units using Flexlock Ultra adhesive (apply in direction of desired air flow)

ཎ Install second course of Borealis Wall, ensuring correct placement of any units that need to

bridge over access doors

ཎ Install final course of Graphix Wall, mark and cut units to receive Pave Tool Quick-E Vents

ཎ Optional: install under-cap Hyde style in-Lite lighting fixtures

ཎ Install countertop, shim and seamseal with exterior-grade caulk, as needed

ཎ Install Grill or other applicable appliances

Always consult appliance manufacturer’s recommendations regarding cross-ventilation and fuel requirements.

Process


14

ROW-BY-ROW DRAWINGS

ROW 1 ROW 2

ROW 3 ROW 4

ROW 5 ROW 6

ROW 7 ROW 8

ROW 1 ROW 2

ROW 3 ROW 4

ROW 5 ROW 6

ROW 7 ROW 8

ROW 9 ROW 10

ROW 11


CAD DRAWING

Elevation A

GRAPHIX/BOREALISGRILL ISLAND

Elevation B

C

D B


Graphix wall : 12 RowsBorealis wall : 3 rowsCounter top supplied by others

A

Elevation DElevation C

8'-8"

Plan view

3' 1

''

3-A 4 2-A 3 1 2-A 2-A 3-A

3-A 1-A 3 4-A 2 4-A 4-A 3-A

2-A 1 4 2 3-A 4-A 4-A 3-A

3-A 1-A 4-A 4 2-A 1-A 1-A 2-A

4-A 1 3 4 1-A 2-A 2-A 1-A

1-A 3 1 2 3-A 2-A 2-A 4-A

3-A 2-A 4 1 4-A 4-A 4-A 3-A

3-A 1-A 4 3 2 1-A

4-A 3 1 2 4 2-A 2-A 1-A

1-A 3 2 4 1 3-A 3-A 4-A1-A 3-A

2-A 4-A 3 1-A 1-A 4-A 4-A 3-A

3-A 2 3 1 2 2-A 2-A 2-A

1-A 1 3 2 4 3-A 3-A 4-A

4-A 1 2 4 1-A 2-A 2-A 1-A

3-A 4 2 3 1 2-A 2-A 3-A

3-A 1 3 4 2 4-A 4-A 3-A

3'-0

"


16

MINI GRILL ISLAND WITH RAFFINATO STEP COUNTER / BAR / GRILL ISLAND (LENGTH: 8’ 21/2”)

Build time*: 6 hr

Staff: 2


This mini grill island can serve as a functional alternative for

everyday cooking. It is designed to seamlessly complement any

landscape using Raffinato Steps.

*excludes base construction



ASTM #57 $____ ___ $____

ASTM #8 or ASTM C-33 $____ ___ $____

Geotextile $____ ___ $____


Ready-Mix or Porous Concrete $____ ___ $____

27 units Raffinato Step $____ ___ $____

Construction adhesive $____ ___ $____

4 vents (min. 18 in2 vent space required) $____ ___ $____

Grill $____ ___ $____


Mini Grill Island with Raffinato Step



Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____




18

ཎ Run conduits for electrical and gas (as required)

ཎ With certified, bonded gas technician, run propane or natural gas line

ཎ Appropriate inspector must approve installation prior to backfilling trench

ཎ Classify, amend and compact soil subgrade — final surface should not have variation greater

than +/- 3/8” over 10’

ཎ Install appropriate geotextile (extended up sides of excavation and shingled with flow of water)

ཎ Install sub-base (open-graded: ASTM #57) minimum 4”-6” thickness

ཎ Form and pour Ready-Mix or Porous Concrete (PC) pad, recommended min. 4”

(fiber-reinforcement, if required)

ཎ Install skim coat leveling bed (ASTM #8 or ASTM C-33) *if required

ཎ Mark and cut Raffinato Step units to accomodate cross-ventilation and assembly plan

ཎ Mechanically install Raffinato Step units, as per plan, secured using construction adhesive

ཎ Install electrical outlets *optional

ཎ Trial fit grill to assess required supports

ཎ With certified, bonded gas technician connect grill to gas line and pressure test

ཎ Insert vent grates and access panels/doors/drawers

ཎ Install custom counter-top

Always consult manufacturer’s recommendations regarding cross-ventilation requirements.

Process


ROW-BY-ROW DRAWINGS

Row 1

Row 3

Row 5 Row 6 (Counter-top)

Row 2

Row 4

3’6”

8’2 1/2”Lay full units firstMeasure and cut to fill spaces

Measure and cut to fill spaces


20

CAD DRAWING


Raffinato steps: 27 Pcs

RAFFINATO GRILL ISLAND

FRONT ELEVATION

3'-0

5 16"

SIDE ELEVATION

ROW 1

ROW 2

1'-1

"

1'-1

"8'-21

2" 3'-6"


21

CAD DRAWING

ROW 3

ROW 4

ROW 5

1'-1

"

1'-1

"

1'-1

"

RAFFINATO GRILL ISLAND


22

FULL-SIZE GRILL ISLAND WITH RAFFINATO STEP AND BRANDON WALL INSERT COUNTER / BAR / GRILL ISLAND (LENGTH: 11’ 81/2”)

Build time*: 6 hr

Staff: 2


This full-sized islands is an entertainer’s dream. And it’s easy

to add to most patios.




ASTM #57 $____ ___ $____

ASTM #8 or ASTM C-33 $____ ___ $____

Geotextile $____ ___ $____






Grill $____ ___ $____


Full-size Grill Island with Raffinato Step and Brandon wall insert



Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____




24

ཎ Run conduits for electrical and gas (as required)



ཎ Classify, amend and compact soil subgrade — final surface should not have variation greater

than +/- 3/8” over 10’






ཎ Mark and cut Raffinato Step units to accomodate ventilation and assembly plan

ཎ Mechanically install Raffinato Step units, as per plan, secured using construction adhesive.

At same time, install Brandon 90mm Wall block, secured with supplied anchoring pins and

construction adhesive.

ཎ Install electrical outlets *optional

ཎ Trial fit grill to assess required supports

ཎ With certified, bonded gas technician connect grill to gas line and pressure test

ཎ Insert cross-vent grates and access panels/doors/drawers

ཎ Install custom counter-top


Process


ROW-BY-ROW DRAWINGS

Front Right side

Back Left side

3’63/8”

11’8” 3’6”

3’6”

11’8”

Cut at 27”

Cut at 13”

Cut at 27 1/2”

Cut at 27 1/2”

Cut at 27 1/2”

Row 1 Row 2

Row 3 Row 4

Row 5 Row 6

Toe kick of 4” on both sidesBrandon wall cut to fit

3’6”

Front Right side

Back Left side

3’63/8”

11’8” 3’6”

3’6”


26

CAD DRAWING


Raffinato steps: 35 PcsBrandon walls: 12 RowsForno : 1 Unit

RAFFINATO & BRANDONGRILL ISLAND

FRONT11'-81

2"

3'-7

38"

BD90-C

BD90-C BD90-A BD90-B BD90-C BD90-A BD90-B BD90-B

BD90-ABD90-BBD90-A

BD90-C

BD90-CBD90-BBD90-ABD90-BBD90-ABD90-A


BD90-ABD90-BBD90-A

BD90-C

BD90-CBD90-BBD90-ABD90-BBD90-ABD90-A

BD90-ABD90-BBD90-ABD90-CBD90-BBD90-ABD90-BBD90-ABD90-A

BD90-ABD90-BBD90-ABD90-CBD90-BBD90-ABD90-BBD90-ABD90-A

BD90-CBD90-ABD90-CBD90-BBD90-BBD90-ABD90-CBD90-B


REAR

RIGHT SIDE3'-6"

LEFT SIDE3'-6"11'-81

2"


27

CAD DRAWING


ROW 1

3'-6"

11'-812"

4" TOW KICK ON BOTH SIDES

4"

4"2'-312"

ROW 211'-812"

1'-1"

3'-6"

ROW 3

2'-31 2"


28

CAD DRAWING


ROW 4

2'-31 2"

2'-31 2"

ROW 5

ROW 6

1'-1

"


29

RAFFINATO STEP + GRAPHIX WALL WOOD-FIRED OVEN (LENGTH: 3’ 6”)

Build time*: 1 hr

Staff: 2


The sleek, modern look of the Raffinato collection has now been ex-

tended to an outdoor wood-fired oven feature — allowing you to easily

substitute a tin eyesore with a piece of art.




ASTM #57 $____ ___ $____

ASTM #8 or ASTM C-33 $____ ___ $____

Geotextile $____ ___ $____



10 rows Graphix Wall $____ ___ $____



Forno pizza oven $____ ___ $____


Raffinato Step Linear feature/”Fire Pit”



Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____




31

ཎ Classify, amend and compact soil subgrade — final surface should not have greater

than +/- 3/8” over 10’



ཎ Form and pour Ready-Mix or Porous Concrete (PC) pad, recommended min. 4” thickness



ཎ Mechanically install 3 Raffinato Step units, as per plan

ཎ Install 10 rows Graphix Wall, as per plan, using supplied clips and bonded with construction

adhesive

ཎ Mechanically install 3 Raffinato Step units, as per plan

ཎ Install Forno pizza oven

Consult local building codes to set appropriate distance from homes and other structures.

Process


ROW-BY-ROW DRAWINGS

Length of cut units determined at installers discretion

Length of cut units determined at installers discretion


33

CAD DRAWING


Graphix wall: 10 RowsRaffinato step: 6 pcsForno : 1 unit

Elevation A

GRAPHIXPIZZA OVEN

PLAN VIEW Elevation B

Elevation C Elevation D

NOTE: Secure the blocks using a concrete adhesive. The installer must ensure that the installation and use of the pizza oven comply with local regulations and code requirements. The construction of the base should include the installation of a concrete slab and pillars under the slab. The depth of the pillars and reinforcement should be determined based on site conditions and comply with local code.

A

B

C

D

2-A 2-A3-A 3-A2-A 4-A

2-A4-A2-A 2-A3-A 4-A2-A 2-A4-A 2-A2-A 4-A

3-A3-A

2-A 2-A13-A

4-A 2-A12-A

4-A2-A4-A14-A

2-A2-A12-A

4-A 2-A4-A43-A

3-A 2-A4 3-A

3-A 2-A1 4-A

3-A 2-A2-A 4 3-A

3-A 2-A1 4-A

3-A 2-A1 3-A

2-A4

4-A3

2-A 4-A3

2-A4-A3

2-A 4-A3

2-A4-A

3'-7

1 2"3'-6" 3'-71

2"


34

CAD DRAWING

GRAPHIXPIZZA OVEN - ROW BY ROW

2-A

2-A

4

2-A

3-A

4-A2-A

143-A 3-A

ROW 1 ROW 2 ROW 3

101 2"

1134"

3'-71 2"

3'-6"

ROW 4

4-A

2-A

3

3-A

2-A

2-A

1

ROW 5

2-A4-A

4-A

1

10"1'-1"

ROW 62-

A4-

A

3

3-A

2-A

ROW 7

4-A

1

4-A2-A

43-A

1'-0"

1'-1"

ROW 8

2-A

2-A

3

3-A

2-A

ROW 9

2-A

12-A4-A

4-A

1

1'-1"

10"


35

CAD DRAWING

ROW 10

4-A

2-A

3

3-A

2-A

4-A2-A

1 4

3-A 3-A

ROW 11

101 2"

1134"

ROW 12

ROW 13 (FORNO)



36

BOREALIS WALL WOOD-FIRED OVEN (LENGTH: 3’ 6”)

Build time*: 1 hr

Staff: 2


The Borealis Wall wood-fired oven is the perfect addition for any

homeowner who is looking to impress. This design combines a

classic look with a versatile oven that’s ready to be fired up.



37


ASTM #57 $____ ___ $____

ASTM #8 or ASTM C-33 $____ ___ $____

Geotextile $____ ___ $____



1 pallet of Borealis Wall $____ ___ $____


Forno pizza oven $____ ___ $____


Borealis wall Wood-Fired Oven



Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____




38


than +/- 3/8” over 10’

ཎ Install appropriate geotextile (extended up sides of excavation and shingled with

flow of water)





ཎ Cut Borealis Wall units, as per plan

ཎ Install Borealis Wall units, as per plan, bond with construction adhesive



Process


39

ROW-BY-ROW DRAWINGS

Row 6

Row 4 Row 5

Row 6

Row 4 Row 5

Row 3Row 2

Row 1

Row 3Row 2

Row 1

Row 3Row 2

Row 1

Row 3Row 2

Row 1


40

CAD DRAWING


Graphix wall: 10 RowsRaffinato step: 6 pcsForno : 1 unit

Elevation A

GRAPHIXPIZZA OVEN




A

B

C

D

2-A 2-A3-A 3-A2-A 4-A

2-A4-A2-A 2-A3-A 4-A2-A 2-A4-A 2-A2-A 4-A

3-A3-A

2-A 2-A13-A

4-A 2-A12-A

4-A2-A4-A14-A

2-A2-A12-A

4-A 2-A4-A43-A

3-A 2-A4 3-A

3-A 2-A1 4-A

3-A 2-A2-A 4 3-A

3-A 2-A1 4-A

3-A 2-A1 3-A

2-A4

4-A3

2-A 4-A3

2-A4-A3

2-A 4-A3

2-A4-A

3'-7

1 2"

3'-6" 3'-712"


41

CAD DRAWING


2-A

2-A

4

2-A

3-A

4-A2-A

143-A 3-A

ROW 1 ROW 2 ROW 3

101 2"

1134"

3'-71 2"

3'-6"

ROW 4

4-A

2-A

3

3-A

2-A

2-A

1

ROW 5

2-A4-A

4-A

1

10"1'-1"

ROW 62-

A4-

A

3

3-A

2-A

ROW 7

4-A

1

4-A2-A

43-A

1'-0"

1'-1"

ROW 8

2-A

2-A

3

3-A

2-A

ROW 9

2-A

12-A4-A

4-A

1

1'-1"

10"


42

CAD DRAWING

ROW 10

4-A

2-A

3

3-A

2-A

4-A2-A

1 4

3-A 3-A

ROW 11

101 2"

1134"

ROW 12

ROW 13 (FORNO)



43

RÖCKA WOOD-FIRED OVEN

Build time*: 2 hrs

Staff: 2

Total labor hours: 4 hrs

Using Röcka wall to build an outdoor wood-fired oven offers your clients

a beautiful, simple to execute cooking feature with storage capacity. The

stack stone appearance provides a traditional look.



44


ASTM #57 or ASTM C-2940 $____ ___ $____

ASTM #8 or ASTM C-33 $____ ___ $____

Geotextile $____ ___ $____

Concrete Forms $____ ___ $____

Ready-mix or Porous Concrete $____ ___ $____

1 pallet Röcka Wall $____ ___ $____

12 units of Piedimonte Cap $____ ___ $____


Firepit feature basin & accessories $____ ___ $____


Röcka Wood-Fired Oven



Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____

Röcka Wood-Fired Oven





45


than +/- 3/8” over 10’






ཎ Cut Borealis Wall units and Piedimonte Cap units, as per plan

ཎ Install Borealis Wall and Piedimonte Cap units, as per plan, bond with construction adhesive



Process


46

ROW-BY-ROW DRAWINGS

OPTION 1


47

CAD DRAWING


Rocka wall: 1 pal Piedimonte cap: 6 pcs Forno : 1 unit

Elevation A

ROCKAPIZZA OVEN (MODEL 1)




A

B D

C

4'-0"

2'-1

114"

C

B BB A

BBA B

AC C

B CAA

B CB

C

CB

BC

A

A

B

B

A CC

BC

A ABC

B

3'-334" 2'-51

4"2'

-101

2"

OPTION 1


48

CAD DRAWING

OPTION 1ROCKA

PIZZA OVEN - ROW BY ROW


C

A A

C

ROW 1

2'-5

1 4"

3'-334"

ROW 2 (Piedimonte caps)

1'-10" 1'-10"11

34"

113

4"11

34"

2'-1

114"

C

BB

ROW 3

3'-334"

1'-6

1 2"

1'-6

1 2"

A

A

B

B

ROW 4

1'-1

1 4"1'

-11 4"

C

BB

ROW 5

1'-6

1 2"

1'-6

1 2"

A

B

B

ROW 6

A

2'-2

1 2"

1'-1134"

1'-1

1 4"1'

-11 4"

ROW 7

2'-0" 2'-0"

113

4"11

34"

113

4"

ROW 8 (Forno)


49

ROW-BY-ROW DRAWINGS

OPTION 2


50

CAD DRAWING


Rocka wall: 4 Rows Piedimonte cap: 12 pcs Forno : 1 unit

Elevation A


PLAN VIEWElevation B



A

B D

C

4'-0"

2'-1

114"

3'-334" 2'-51

4"2'

-101

2"C

B BBABB

AB

C

AC C

B CAA

B CC B

B

C

BC

A B

AB BCB BB

A CC

BCA A

BC

B

CB

OPTION 2


51

CAD DRAWING

OPTION 2ROCKA

PIZZA OVEN - ROW BY ROW


C

A A

C

ROW 1

2'-5

1 4"

3'-334"


1'-10" 1'-10"11

34"

113

4"11

34"

2'-1

114"

ROW 3

ROW 4 ROW 5 ROW 6

ROW 7

2'-0" 2'-0"

113

4"11

34"

113

4"

ROW 9 (Forno)

A

A

B

B

1'-1134"

2'-2

1 2"

1'-1

1 4"1'

-11 4"

C

BB

3'-334"

1'-6

1 2"

1'-6

1 2"

A

B

B

A

1'-1

1 4"1'

-11 4"

2'-2

1 2"1'-113

4"

C

BB

3'-334"

1'-6

1 2"

1'-6

1 2"

C

1'-6

1 2"

1'-6

1 2"BBB

1'-1134"

ROW 8


52

ROW-BY-ROW DRAWINGS

OPTION 3


53

CAD DRAWING

OPTION 3



Elevation A


PLAN VIEW


A

C

B D

5'-0"

2'-1

114"

C A

BB BBB BBB B

C BBC C

A

AC

BB ABCA

A A BB A AC

C A

C A C

ABB

ABB

B C

C A C

C BB

BBAA

A C

Elevation C

Elevation B Elevation D


54

CAD DRAWING

OPTION 3

ROCKAPIZZA OVEN - ROW BY ROW

ROW 1 ROW 2 (Piedimonte caps)

CA

AA

AC

4'-5"

2'-5

1 4"

B

AC

B B

1'-6

1 2"

ROW 3

BBB

A B

1'-1134"

1'-6

1 2"

ROW 4

B B

AAB

B

ROW 5

1'-6

1 2" CB

AC

ROW 6

A

A 1'-6

1 2"

1'-1134"





55

ROCKAPIZZA OVEN - ROW BY ROW

ROW 7

ROW 9 (Forno)

C

CA

C B

1'-6

1 2"





CAD DRAWING

OPTION 3


56

BOREALIS + GRAPHIX WALL FIRE FEATURE / “FIRE PIT” (LENGTH: 5’4”)

Build time*: 1 hr

Staff: 2


Fire features are the most popular upgrade to residential patio projects.

This unique blend of smooth and wood-grain textures adds warmth and

refinement to any outdoor space.



** Porous concrete mix design: 4 parts aggregate to 1 part Portland cement, mix carefully with just enough water to hydrate the cement, but not create a thick paste. The mix should hold together after being squeezed in your hand and should have a slight shine to it.


ASTM #57 or RC-57 (¾” clean stone or recycled concrete) or Synthetic Base

$____ ___ $____

ASTM #8 (¼” clean stone) or ASTM C 33 (Washed concrete sand) bedding layer (helpful when leveling large wetcast units)

$____ ___ $____



Warming Trends fabricated pan, selected burners and ignition system

$____ ___ $____

Optional windscreen $____ ___ $____

Decorative heat resistant media (glass or lava rock) $____ ___ $____

Pave Tool Quick-E Vents (2.95” height) $____ ___ $____



Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____




Borealis + Graphix Wall Fire Feature / “Fire Pit”



58

ཎ Run conduits for gas and electricity (if electric ignition option)

ཎ With a certified and bonded gas technician, run natural gas or propane line

ཎ Installation must be approved by local inspector

ཎ Install selected base material

ཎ Screed optional bedding layer



image above)

ཎ Mark and cut Graphix Wall units to accommodate vents and ignition panel

ཎ Install final course of Borealis Wall

ཎ Test fit burner and pan, adjust to fit and support unit using block supports or metal brackets

ཎ Allow gas technician to connect and test burner system and secure components

ཎ Adhere units using Flexlock Ultra adhesive (apply in direction of desired air flow)

ཎ Install decorative media and optional windscreen

Always consult appliance manufacturer’s recommendations regarding cross-ventilation and fuel requirements.

Process


ROW 1

ROW 2 ROW 3

ROW-BY-ROW DRAWINGS


60

CAD DRAWING

Section 1-1

Elevation A

GRAPHIX/BOREALISFIREPIT

Elevation B

Elevation C

Elevation D

B

CDE

A

B

C

D

4'-0

"

5'-4"

1 1

2-A 4-A1 4

4-A 2 1-A

1-A 3 4 3-A

3-A 2 2-A

A


Graphix wall : 2 RowsBorealis wall : 2 rows

F

Plan view

NOTE: Secure the blocks using a heat resistantconcrete adhesive.The installer must ensure that the installation and useof the fire pit comply with local regulations and coderequirements.

A. BOREALIS WALL UNITB. GRAPHIX WALL UNIT, SMOOTH FACE ONLYC. TECHO-BLOC PAVERS OR SLABSD. SETTING BED 1'' (25 mm)E. COMPACTED GRANULAR 0-3/4'' (0-20 mm)F. CUSTOM PAN BY WARMING TRENDS - For Natural gas or Propane burner configurations only.G. 2 VENTS REQUIRED FOR CROSS-VENTILATION. - Pave Tool Quick-E classic vents available in 2.9" height to match Graphix & 9.75" wide. - Recommended location for natural gas application is in the Graphix layer.


61

RAFFINATO STEP LINEARFIRE FEATURE / “FIRE PIT” (LENGTH: 9’ 4”)

Build time*: 2 hr

Staff: 2


The Raffinato Step linear fire feature is a creative addition that is sure to

add warmth to any landscape. The design is easy to build, and can be

completed within a single day.




ASTM #57 or ASTM C-2940 $____ ___ $____

ASTM #8 or ASTM C-33 $____ ___ $____

Geotextile $____ ___ $____

9 units Raffinato 60mm Cap or 60mm CPS for embedment $____ ___ $____




1x burner $____ ___ $____

1x windscreen $____ ___ $____

Decorative media $____ ___ $____





Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____




63

ཎ Run conduits for gas and electrical


ཎ Install heat-resistant drain *if required


ཎ Classify, amend and compact soil subgrade — final surface should not

have greater variation than +/- 3/8” over 10’


ཎ Install base (open-graded base: ASTM #57 or dense-graded base: ASTM C-2940) minimum

4”-6” thickness

ཎ Install 1” leveling bed (open-graded: ASTM #8 or dense-graded: ASTM C-33) *optional

ཎ Install Concrete Paving Slabs (CPS) for embedment *best practice

ཎ Mark and cut Raffinato Step units to accomodate ventilation and assembly plan

ཎ Mechanically install Raffinato Step units as per plan, including manufacturer-recommended

cross-ventilation

ཎ Apply appropriate construction adhesive between units *high temperature-resistant

when applicable

ཎ Trial fit of burner in fire feature opening, evaluate need for internal burner supports

(block supports or metal brackets)

ཎ With certified, bonded gas technician, connect burner to gas line

ཎ Install windscreen and decorative media (lava rock, glass, etc.)


Process


ROW-BY-ROW DRAWINGS

ROW 2

ROW 1

ROW 3

Row 1

Row 3Row 2

ROW 2

ROW 1

ROW 3

Row 1

Row 3Row 2

ROW 2

ROW 1

ROW 3

Row 1

Row 3Row 2

ROW 2

ROW 1

ROW 3

Row 1

Row 3Row 2


65

CAD DRAWING

1

Section 1-1


Raffinato step units: 12 pcsRaffinato 60mm caps: 9 pcs

RAFFINATOFIREPIT - LINEAR

A. RAFFINATO STEP UNITB. RAFFINATO 60MM CAP AS THE BASEC. TECHO-BLOC PAVERS OR SLABSD. SETTING BED 1'' (25 mm)E. COMPACTED GRANULAR 0-3/4'' (0-20 mm)

NOTE: Secure the blocks using a concrete adhesive. The installer must ensure that the installation and use of the fire pit comply with local regulations and code requirements.

A

CD

E

9'-5"

3'-6

"

A

A

B

1'-2

1 8"

1

B

Elevation B

B

Elevation A


66

CAD DRAWING

REDEFINING LANDSCAPE PRODUCTS

Phone 1.877.832.4625 [email protected] techo-bloc.com/support-manual 7REDEFINING LANDSCAPE PRODUCTS


CLIENT:

DATE:

DESIGNER(S):





Techo Bloc

August 2018

Nick Tenhage

CMYK

20/40/65/2

12/22/33/1

0/0/0/90

RAFFINATO STEP LINEAR FIRE FEATURE

ROW 2

ROW 1

ROW 3

Row 1

Row 3Row 2

ROW 2

ROW 1

ROW 3

Row 1

Row 3Row 2

ROW 2

ROW 1

ROW 3

Row 1

Row 3Row 2

ROW 2

ROW 1

ROW 3

Row 1

Row 3Row 2


RAFFINATOFIREPIT - LINEAR - ROW BY ROW

ROW 1 (BASE) RAFFINATO 60mm CAPS

3'-6"

4"4"

3'-6" 3'-6"

ROW 2 (4" Toe kick)

ROW 3

3'-6"

9'-5"

9'-4"

3'-6"


67

GRAPHIX WALL FIRE FEATURE / “FIRE PIT” (LENGTH: 4’ 63/4”)

Build time*: 1 hr

Staff: 1-2


Like the fire it contains, the Graphix Wall fire feature keeps the eye

moving with altering depths and textures. Its sleekness and visual

interest make it perfect for design lovers.




ASTM #57 or ASTM C-2940 $____ ___ $____

ASTM #8 or ASTM C-33 $____ ___ $____

Geotextile $____ ___ $____

1 pallet Graphix Wall $____ ___ $____

2 rows Graphix or Raffinato 60mm Cap $____ ___ $____



1x burner $____ ___ $____

1x windscreen $____ ___ $____

Decorative media $____ ___ $____


Graphix wall Fire Feature / “Fire Pit”



Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____




69


ཎ With certified, bonded gas technician, run propane or natural gas line *omit if wood-burning


ཎ Appropriate inspector must approve installation prior to backfilling trench *omit if wood-burning

ཎ Classify, Amend & Compact soil subgrade. Final surface should not have greater variation than

+/- 3/8” over 10’


ཎ Install base (open-graded base: ASTM #57 or dense-graded base:

ASTM C-2940) minimum 4”-6” thickness

ཎ Install 1” leveling bed (open-graded: ASTM #8 or dense-graded:

ASTM C-33) *optional


ཎ Assemble fire feature using Graphix Wall block, as per plan

ཎ Mark and cut blocks to accommodate manufacturer-recommended

cross-ventilation *omit if wood-burning


when applicable


(block supports or metal brackets) *omit if wood-burning

ཎ Insert heat-resistant steel liner or fire brick if wood-burning


*omit if wood-burning




Process


ROW-BY-ROW DRAWINGS

4’3”4’2 1/6”

1’3/4”1’8 1/2”


71

CAD DRAWING

1 1

Section 1-1


Graphix wall unit: 1 PAL

Elevation A

GRAPHIXFIREPIT - SQUARE

A. STEEL BOX INSERTB. GRAPHIX WALL UNITC. TECHO-BLOC PAVERS OR SLABSD. SETTING BED 1'' (25 mm)E. COMPACTED GRANULAR 0-3/4'' (0-20 mm)


A B

CD

E

A

B

C

D4-A 3

2-A14-A 3

2 1-A1-A 4

2 3-A

2-A 42 3-A

1-A 23 4-A

4-A 23 1-A

Elevation B

3-A 14 1-A

2-A 14 2-A

3-A 14 2-A

Elevation C

1-A 23 4-A

3-A 41 3-A

2-A 31 4-A

Elevation D

4'-634"

4'-6

34"

1'-8

"


72

CAD DRAWING

GRAPHIXFIREPIT - SQUARE - ROW BY ROW

2-A

4

3-A1

1-A

2

4-A 3

ROW 1 ROW 2

1 2-A

4-A

3

1-A 4

3-A

2

4-A 3

1-A2

2-A1

3-A

4

ROW 3

13-

A

4 4-A

2-A

3

1-A2

ROW 4

1-A

32-

A

1 3-A

2

4-A

4

ROW 5

4-A

1

2-A 4

1-A

3

3-A2

ROW 6

CAPS1'-03 4"

1'-034"

1'-03 4"

1'-034"


73

BOREALIS FIREPIT FIRE FEATURE / “FIRE PIT”

Build time*: 1 hr

Staff: 1-2


The counter-intuitive look of wood framing in a blazing fire is one that is

sure to set any landscape project apart. Give your customers the perfect

focal point to settle in for a cozy evening in the outdoors.




Geotextile $____ ___ $____

Open or Dense-graded base material $____ ___ $____

1 pallet of Borealis Wall $____ ___ $____

Flexlock Ultra Adhesive $____ ___ $____

*if wood-burning: Fire Brick or Heat-Resistant Steel Sleeve/Insert (to line interior walls)

$____ ___ $____

High Temperature Resistant Adhesive (if using fire brick) $____ ___ $____

**if Natural Gas or Liquid Propane: 2 Ventilation Grills (or as otherwise specified by burner supplier)

$____ ___ $____

1 burner & supporting pan $____ ___ $____

1 Windscreen (optional) $____ ___ $____


Borealis ”Fire Pit”



Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____




75






+/- 3/8” over 10’






ཎ Install Concrete Paving Slabs (CPS) for embedment *best practice, but optional

ཎ Assemble fire feature using Borealis Wall block, as per plan




when applicable









Process


ROW-BY-ROW DRAWINGS

ROW 1

ROW 3ROW 2

SQUARE


77

CAD DRAWING

1 1

Section 1-1


Borealis wall unit: 12 pcs

Elevation A

Elevation B

BOREALISFIREPIT - SQUARE

A. REFRACTORY BRICKB. BOREALIS 6'' WALL UNITC. TECHO-BLOC PAVERS OR SLABSD. SETTING BED 1'' (25 mm)E. COMPACTED GRANULAR 0-3/4'' (0-20 mm)

NOTE: Secure the blocks using concrete adhesive. The installer must ensure that the installation and use of the fire pit comply with local regulations and code requirements.

AB

CD

E

1'-6

"

4'-8"4'-8"

4'-8

"

B

A

A

B

SQUARE


ROW-BY-ROW DRAWINGS

RECTANGULAR

ROW 1

ROW 3ROW 2


79

CAD DRAWING

1 1

Section 1-1



Elevation A

BOREALISFIREPIT - RECTANGULAR


A

B

CD

E

1'-6

"

5'-8"5'-8"

3'-8

"

Elevation B

B

A

A

B

Cut at 12"

Cut at 36"

Cut at 36"

Cut at 36"

Cut at 12"

Cut at 12"

Cut at 12"

Cut at 12"

Cut

at 3

6"

Cut

at 3

6"


RECTANGULAR


ROW-BY-ROW DRAWINGS

USING SQUARE HEAT-RESISTANT

SLEEVE

ROW 1

ROW 3ROW 2


81

CAD DRAWING

USING SQUARE HEAT-RESISTANT

SLEEVE

1 1

Section 1-1


Borealis wall unit: 16 (1 pallet)

Elevation A

BOREALISFIREPIT - SQUARE WITH SLEEVE

A. STEEL BOX INSERTB. BOREALIS 6'' WALL UNITC. TECHO-BLOC PAVERS OR SLABSD. SETTING BED 1'' (25 mm)E. COMPACTED GRANULAR 0-3/4'' (0-20 mm)


AB

CD

E

Elevation B

3'-8"

3'-8

"

3'-8"

1'-6

"

B

A

A

B

Cut at 36"

Cut at 36"

Cut at 36"

Cut at 36"

Cut at 36"

Cut at 36"

Cut at 36"

Cut at 36"

Cut

at 3

6"

Cut

at 3

6"


82

RÖCKA FIREPIT FIRE FEATURE / “FIRE PIT”

Build time*: 1 hr

Staff: 1-2


The stack stone appearance of Röcka Wall is perfect to create a warm

and inviting fire feature for homeowners to enjoy year round.




Geotextile $____ ___ $____


1 pallet of Röcka Wall $____ ___ $____



$____ ___ $____



$____ ___ $____




Röcka ”Fire Pit”



Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____




84






+/- 3/8” over 10’







ཎ Assemble fire feature using Röcka Wall block, as per plan




when applicable









Process


ROW-BY-ROW DRAWINGS

SQUARE

ROW 1

ROW 3ROW 2


86

CAD DRAWING

SQUARE

Section 1-1


Rocka wall units: 1 PAL

Elevation A

ROCKAFIREPIT - SQUARE

A. REFRACTORY BRICKB. ROCKA WALL UNITSC. TECHO-BLOC PAVERS OR SLABSD. SETTING BED 1'' (25 mm)E. COMPACTED GRANULAR 0-3/4'' (0-20 mm)


A

B

CD

E

BA

C

CA

B B D

C

A

3'-1

134"

3'-1134"

BA CCA

B A C

1'-6

"

C CC A B

C B

C AB A B

B A A

Elevation B

Elevation C

BA AB B A

A B B

Elevation D

1 1

Plan view


ROW-BY-ROW DRAWINGS

RECTANGULAR

ROW 1

ROW 3ROW 2


88

CAD DRAWING

RECTANGULAR

Section 1-1


Rocka wall units: 1 PAL

Elevation A

ROCKAFIREPIT - RECTANGULAR

A. REFRACTORY BRICKB. ROCKA WALL UNITSC. TECHO-BLOC PAVERS OR SLABSD. SETTING BED 1'' (25 mm)E. COMPACTED GRANULAR 0-3/4'' (0-20 mm)


A

B

CD

E

1'-6

"

Elevation B

Elevation C

1 1

B

C A

B

AC

5'-1"

2'-1

012" B D

A

C

CB AA C B

ABAB

A BB A

A B

CABBBA A

CAB

Elevation D

C BB A

C B

Plan view


89

TRAVERTINA FIREPIT FIRE FEATURE / “FIRE PIT”

Build time*: 1 hr

Staff: 1-2


In North America, the use of travertine is limited to warmer climates

because of its inability to weather harsh winters. Techo-Bloc’s Travertina

Raw collection is engineered to provide all the timeless beauty of this

stone with no compromises for your customers.




Geotextile $____ ___ $____


1 pallet and 1 row of Travertina Wall Corner Units $____ ___ $____

2 rows of Travertina Raw 12”x30” Cap $____ ___ $____



$____ ___ $____



$____ ___ $____







Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____




91






+/- 3/8” over 10’







ཎ Assemble fire feature using Travertina Wall block, as per plan




when applicable









Process


ROW-BY-ROW DRAWINGS

SQUARE

ROW 1

ROW 3ROW 2


93

CAD DRAWING

SQUARETRAVERTINA RAW

FIREPIT - SQUARE WITH SLEEVE

A. STEEL BOX INSERTB. TRAVERTINA RAW CORNER UNITC. TECHO-BLOC PAVERS OR SLABSD. SETTING BED 1'' (25 mm)E. COMPACTED GRANULAR 0-3/4'' (0-20 mm)


A

C

B D

1 1

2'-234" 113

4"1134"

2'-1

1 8"2'

-11 8"

Elevation A

AB

CD

E

Section 1-1

Elevation D

Elevation C

Elevation B


Travertina Raw Corner units: 30 PcsTravertina Raw Cap unit: 6 Pcs

Plan view


ROW-BY-ROW DRAWINGS

RECTANGULAR

ROW 1

ROW 3ROW 2


95

CAD DRAWING

RECTANGULAR

AB

CD

E

TRAVERTINA RAWFIREPIT - RECTANGULAR

A. REFRACTORY BRICKB. TRAVERTINA RAW CORNER UNITC. TECHO-BLOC PAVERS OR SLABSD. SETTING BED 1'' (25 mm)E. COMPACTED GRANULAR 0-3/4'' (0-20 mm)


Section 1-1


Travertina Raw Corner units: 3 RowsTravertina Raw Cap unit: 2 Rows

B

A

C

D

1 1

2'-2" 1'-51316"

2'-1

34"

2'-1

34"

Elevation A

Elevation C

Elevation D

Elevation BPlan view


ROW-BY-ROW DRAWINGS

LINEAR

ROW 1

ROW 3ROW 2


97

CAD DRAWING

LINEARTRAVERTINA RAW

FIREPIT - LINEAR

A. REFRACTORY BRICKB. TRAVERTINA RAW CORNER UNITC. TECHO-BLOC PAVERS OR SLABSD. SETTING BED 1'' (25 mm)E. COMPACTED GRANULAR 0-3/4'' (0-20 mm)


A

B

C

D

2'-234" 2'-23

4" 1'-51516"113

4"

1'-1

113 16

"11

34"

1 1

AB

CD

E

Section 1-1

Elevation A & C

Elevation B

Elevation D

Plan view


Travertina Raw Corner units: 3 RowsTravertina Raw Cap unit: 2 Rows


BOREALIS + GRAPHIX WALL ELEVATED WATER FEATURE / “WATER FOUNTAIN” (LENGTH: 5’4”)

Build time*: 1 hr

Staff: 2


The sound of trickling water drowns out neighborhood noise and creates

a tranquil environment for your customers to enjoy. Quick and easy to

build, this feature is a fantastic addition to any project.



99



$____ ___ $____


$____ ___ $____



Aquascape Aquabasin 30” $____ ___ $____

Aquascape EPDM 45 Mil Liner (for splash skirt) $____ ___ $____

Aquascape decorative fountain feature (Rippled Urn pictured above) and related accessories

$____ ___ $____

Optional Aquascape Compact Fill Valve and related water source (irrigation system connector or garden hose)

$____ ___ $____

Decorative Stone/Pebbles $____ ___ $____



Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____




Borealis + Graphix Wall Elevated Water Feature / “Water Fountain”



ཎ Run conduits for electricity (to power pump) and water (if installing fill valve)





image above)

ཎ Partially backfill structure to set correct elevation for Aquabasin so that the top of the unit rests

slightly below the finished height of the second course of blocks

ཎ Insert Aquabasin (some Graphix units may need to be cut to accommodate the units width)

ཎ Optional: install compact fill valve as per manufacturer’s instructions

ཎ Lay out EPDM liner and trim to size of exterior structure, then trim opening in center to match

interior perimeter of Aquabasin


ཎ Apply Flexlock Ultra adhesive (perpendicular to wall face)

ཎ Install pump and fill Aquabasin

ཎ Backfill structure to stabilize Aquabasin

ཎ Install decorative fountain feature and decorative stone

The installation of a compact fill valve simplifies use and maintenance for the homeowner, increasing their enjoyment of the feature.

Process


101

ROW 1

ROW 2 ROW 3

ROW-BY-ROW DRAWINGS


CAD DRAWING

Section 1-1

Elevation A

GRAPHIX/BOREALISFOUNTAIN

A. BOREALIS WALL UNITB. GRAPHIX WALL UNIT,SMOOTH FACE ONLYC. TECHO-BLOC PAVERS OR SLABSD. SETTING BED 1'' (25 mm)E. COMPACTED GRANULAR 0-3/4'' (0-20 mm)F. AQUASCAPE AQUABASIN (Splash bib can be created with a pond liner. The bib is sandwiched between the last 2 rows of block and is slightly pitched to the center so that water flows back into the Aquabasin)

NOTE: Secure the blocks using a concrete adhesive.

Elevation B

Elevation C

Elevation D

BCDE

A

B

C

D

4'-0

"

5'-4"

1 1

2-A 4-A1 4

4-A 2 1-A

1-A 3 4 3-A

3-A 2 2-A

A


Graphix wall : 2 RowsBorealis wall : 2 rows

1'-3

"

Plan view

FAQUABASIN

NOT TO SCALE


BOREALIS WATER FEATURE / “WATER FOUNTAIN” (LENGTH: 5’4”)

Build time*: 1 hr

Staff: 1-2


The sound of trickling water drowns out neighborhood noise and creates

a tranquil environment for your customers to enjoy. Quick and easy to

build, this feature is a fantastic addition to any project.



104



$____ ___ $____


$____ ___ $____


Aquabasin 45 $____ ___ $____

Aquascape EPDM 45 Mil Liner (for splash skirt) $____ ___ $____

Aquascape decorative fountain feature (Rippled Urn pictured above) and related accessories

$____ ___ $____

Optional Aquascape Compact Fill Valve and related water source (irrigation system connector or garden hose)

$____ ___ $____

Decorative Stone/Pebbles $____ ___ $____



Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____




Borealis Water Feature / “Water Fountain”



ཎ Run conduits for electricity (to power pump) and water (if installing fill valve)




ཎ Partially backfill structure to set correct elevation for Aquabasin so that the top of the unit rests

slightly below the finished height of the second course of blocks

ཎ Insert Aquabasin

ཎ Optional: install compact fill valve as per manufacturer’s instructions

ཎ Lay out EPDM liner and trim to size of exterior structure, then trim opening in center to match

interior perimeter of Aquabasin


ཎ Apply Flexlock Ultra adhesive (perpendicular to wall face)

ཎ Install pump and fill Aquabasin

ཎ Backfill structure to stabilize Aquabasin

ཎ Install decorative fountain feature and decorative stone

Process


106

ROW-BY-ROW DRAWINGS

ROW 1

ROW 3ROW 2


CAD DRAWING

Section 1-1



Elevation A

Elevation B

BOREALISWATER FEATURE



A

B

CD

E

1'-6

"

5'-8"

1 1

5'-8"

5'-8

"

B

A

A

B

Cut at 12"

Cut at 12"

Cut

at 1

2"

Cut

at 1

2"

Cut at 12"

Cut at 12"

Cut at 12"

Cut at 12"

Cut at 12"

Cut at 12"


Row 1

Row 2 Row 3

RÖCKA WALL ELEVATED WATER FEATURE / “WATER FOUNTAIN” (LENGTH: 3’113/4”)

Build time*: 1 hr

Staff: 1


The Röcka Wall water feature adds a classy touch that is sure to

elevate any space. Add this serene water feature to any front or

backyard project for a more discerning client.



109


ASTM #57 or ASTM C-2940 $____ ___ $____

ASTM #8 or ASTM C-33 $____ ___ $____

Geotextile $____ ___ $____

1 pallet Röcka Wall $____ ___ $____


Water feature basin & accessories $____ ___ $____


Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____




Röcka wall Elevated Water Feature / “Water Fountain”



ཎ Run conduits for electrical and water (for optional auto-refill)


than +/- 3/8” over 10’


ཎ Install base (open-graded base: ASTM #57 or dense-graded base: ASTM C-2940)

minimum 4”-6” thickness

ཎ Install 1” leveling bed (open-graded: ASTM #8 or dense-graded: ASTM C-33)

*optional

ཎ Install Röcka Wall units as per plan

ཎ Apply appropriate construction adhesive between units

ཎ Trial fit of water feature basin, evaluate need for internal basin supports

(block supports or aggregates)

ཎ Post-construction wash and application of water repelling sealer

*optional, to avoid water staining

ཎ Install water feature basin & accessories

Process


111

ROW-BY-ROW DRAWINGS

Row 1

Row 2 Row 3


CAD DRAWING

Section 1-1


Rocka wall unit: 1 PAL

Elevation A

Elevation B

ROCKAWATER FEATURE

A. REFRACTORY BRICKB. ROCKA WALL UNITC. TECHO-BLOC PAVERS OR SLABSD. SETTING BED 1'' (25 mm)E. COMPACTED GRANULAR 0-3/4'' (0-20 mm)


A

B

CD

E

1'-6

"

3'-1134"

1

3'-1134"

3'-1

134"

B

A

C

D

1

"A" "B"

"C"

"C"

"A" "B"

"C"

"B" "A"

"B"

"A"

"A" "B"

"A"

"B"

"A" "B"

"C"

"B" "A"

Elevation C

Elevation D

Plan view


BOREALIS + GRAPHIX WALL BENCH - LONG (LENGTH: 10’4”)

Build time*: 2 hr

Staff: 2


Outdoor living features such as fire pits or elevated water fountains re-

quire seating around them to be properly enjoyed. Provide your clients

with a beautiful, durable and customizable seating solution.



114



$____ ___ $____


$____ ___ $____



6 units - Raffinato 60 Cap $____ ___ $____

in-Lite Hyve style lighting fixtures (optional) $____ ___ $____



Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____




Borealis + Graphix Wall Bench - Long



ཎ Run conduits for low-voltage cable for lighting (optional)

ཎ Install aggregate or synthetic base


ཎ Install first course of Borealis Wall, mark and cut units as per plan

ཎ Install course of Graphix Wall, mark and cut units as per plan (smooth faces out to replicate

image above)

ཎ Install final course of Borealis Wall, mark and cut units as per plan

ཎ Mark and cut in drip edge on the underside of Raffinato 60 Cap to prevent water streaks on

wall face

ཎ Install Raffinato 60 Cap maintaining 1” overhang

ཎ Drill and install light fixtures (optional)

ཎ Use Flexlock Ultra adhesive (apply perpendicular to wall face)

It is recommended for benches to be installed 1.5’ to 2.5’ away from fire features for maximum enjoyment.

Process


116

ROW 1 ROW 2

ROW 3 ROW 3

ROW-BY-ROW DRAWINGS


CAD DRAWING

Section 1-1

Elevation A

GRAPHIX/BOREALISLONG BENCH

A. RAFFINATO CAPB. BOREALIS WALL UNITC. GRAPHIX WALL UNIT, SMOOTH FACE ONLYD. TECHO-BLOC PAVERS OR SLABSE. SETTING BED 1'' (25 mm)F. COMPACTED GRANULAR 0-3/4'' (0-20 mm)

Elevation B

C

DEF

C

D B

B


Graphix wall : 2 RowsBorealis wall : 2 rowsRaffinato cap: 2 rows

A

4-A3-A

Elevation D

1-A2-A

Elevation C

3-A2-A23411-A

2-A3411-A24-A

2'-4

"

1

1

1'-5

3/8

"

10'-6"

Plan view

A


118

BOREALIS + GRAPHIX WALL BENCH - SHORT (LENGTH: 6’10”)

Build time*: 1.5 hr

Staff: 2


Outdoor living features such as fire pits or elevated water fountains re-

quire seating around them to be properly enjoyed. Provide your clients

with a beautiful, durable and customizable seating solution.





$____ ___ $____


$____ ___ $____



6 units - Raffinato 60 Cap $____ ___ $____

in-Lite Hyve style lighting fixtures (optional) $____ ___ $____




Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____



Borealis + Graphix Wall Bench - Short



120

ཎ Run conduits for low-voltage cable for lighting (optional)

ཎ Install aggregate or synthetic base


ཎ Install first course of Borealis Wall, mark and cut units as per plan

ཎ Install course of Graphix Wall, mark and cut units as per plan (smooth faces out to replicate

image above)

ཎ Install final course of Borealis Wall, mark and cut units as per plan

ཎ Mark and cut in drip edge on the underside of Raffinato 60 Cap to prevent water streaks on

wall face

ཎ Install Raffinato 60 Cap maintaining 1” overhang

ཎ Drill and install light fixtures (optional)

ཎ Use Flexlock Ultra adhesive (apply perpendicular to wall face)

It is recommended for benches to be installed 1.5’ to 2.5’ away from fire features for maximum enjoyment.

Process


ROW 1 ROW 2

ROW 3 ROW 4

ROW-BY-ROW DRAWINGS


122

CAD DRAWING

Elevation A

GRAPHIX/BOREALISSMALL BENCH

A. BOREALIS WALL UNITB. GRAPHIX WALL UNIT, SMOOTH FACE ONLYC. TECHO-BLOC PAVERS OR SLABSD. SETTING BED 1'' (25 mm)E. COMPACTED GRANULAR 0-3/4'' (0-20 mm)

Elevation B


A

B D


Graphix wall : 2 RowsBorealis wall : 2 rowsRaffinato cap: 2 rows

C

7'-0"

3-A2131-A

4-A2442-A

2-A3-A

1-A4-A

1

1Plan view

2'-4

"

1'-5

3/8

"

Section 1-1

C

DEF

B

A


123

RAFFINATO STEP BENCHTABLE & SEATING FEATURE(LENGTH: 4’ 63/4”)

Build time*: 1-2 hr

Staff: 2


The Raffinato Step bench is both comfortable and stylish. It can easily be

added to a landscape on its own or to complement the Raffinato Step

linear fire feature — as pictured above.

*excluding base construction & custom bench coping)



ASTM #57 or ASTM C-2940 $____ ___ $____

ASTM #8 or ASTM C-33 $____ ___ $____

Geotextile $____ ___ $____

9 units Raffinato 60mm Cap or 60mm concrete paving slabs for embedment

$____ ___ $____



Bench surface coping material (wood, stone or other) $____ ___ $____

Raffinato Step Bench





Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____



125


variation than +/- 3/8” over 10’

ཎ Install appropriate geotextile (extended up sides of excavation and shingled

with flow of water)

ཎ Install base (open-graded: ASTM #57 or dense-graded: ASTM C-2940)

minimum 4”-6” thickness

ཎ Install 1” leveling bed (open-graded base: ASTM #8 or dense-graded base:



ཎ Mechanically install Raffinato Step units as per plan

ཎ Apply appropriate construction adhesive between units

Process


ROW-BY-ROW DRAWINGS

Row 1 Row 2

Row 3 Row 4

Lay full units firstMeasure and cut to fill spaces


127

GRAPHIX TABLE (LENGTH: 10’)

Build time*: 1-2 hr

Staff: 2


Nothing brings family and friends together quite like sharing a great

meal. This 10’ long table is perfect for hosting larger groups outdoors.

*excluding base construction & custom

bench coping)



ASTM #57 $____ ___ $____

ASTM #8 or ASTM C-33 $____ ___ $____

Geotextile $____ ___ $____



1 pallet and 5 rows Graphix Wall

Construction adhesive

Natural stone or Composite material tabletop


Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____




Graphix Table



129


than +/- 3/8” over 10’



ཎ Form and pour Ready-Mix or Porous Concrete (PC) pad, recommended min. 4” thickness



ཎ Install Graphix Wall, as per plan, using supplied clips and bonded with construction adhesive,

ensuring a perfectly level final course of block

ཎ Install tabletop and adhere with Flexlock Ultra adhesive

Follow the sealer manufacturers instructions for proper application.

Process


ROW-BY-ROW DRAWINGS

FACE A FACE B

ROW 1 ROW 2

ROW 3 ROW 4


131

CAD DRAWING

QUANTITY OF MATERIALS REQUIREDGraphix wall: 13 Rows

Elevation A

GRAPHIXTABLE

3-A 3 3 3 3-A4 2 1 31-A 2-A

4-A 2 1 4-A 3-A1 3 4 1 1-A2-A

2-A 4 2 1-A 2-A3-A 1-A 2-A 4-A 1 4-A

4-A 3 1 2 3-A1 4 3 4-A3-A 1-A

1-A 2 4-A 1 3-A

3-A 3-A2-A 2-A

1-A3-A1-A 3-A2-A 2-A

3-A4-A1-A3-A

1-A 2-A3-A 3-A

3-A 3 3-A 3 3-A1-A2 44-A2-A 2-A

11-A 42 3-A3-A 4-A 2 1 4 4-A

2-A 4 2 1-A 2-A2 1 4 3-A3-A 1-A

1-A 34 1-A 2-A2-A 34-A 1-A 4 2-A

3-A 2 4 2 2-A

3-A 3-A1-A2-A

3-A 4-A2-A4-A

2-A 2-A1-A 3-A2-A 4-A

2-A 3-A1-A2-A

Elevation B

Elevation DElevation C

C

B

A

D

PLAN VIEW ( COUNTER TOP)


132

BOREALIS STEPPING STONE COFFEE TABLE TABLE & SEATING FEATURE (LENGTH: 2’)

Build time*: 1 hr

Staff: 1


An uncommon use for the Borealis Stepping Stone, this coffee table

is simple to construct and adds a truly unique finishing touch to your

project.




1 unit - Borealis Stepping Stone $____ ___ $____

3 pcs - hairpin-style legs of the desired height $____ ___ $____

Premium Pressure Treated Plywood ⅝” $____ ___ $____

Flexlock Wet Cast Sealer (Zero Gloss or Low Gloss) $____ ___ $____



Laborer type 1 $____ _____ $____

Laborer type 2 $____ _____ $____




Borealis Stepping Stone Coffee Table



134

ཎ Cut the pressure treated plywood to mirror the shape of the slab (mind your curves) with the

jigsaw or miter saw. The plywood should be cut smaller than the slab to allow for an overhang

of a few inches.

ཎ Glue the plywood to the underside of the slab, keeping in mind to keep the two shapes aligned.

ཎ Fasten the legs to the plywood.

ཎ Apply the Flexlock Wet Cast sealer to the slab. Two coats are recommended. Allow a 24 hr cure

period between coats.

Follow the sealer manufacturers instructions for proper application.

Process


BOREALIS STEPPING STONECOFFEE TABLE - STEP BY STEP

A. BOREALIS STEPPING STONEB. PRESSURE TREATED PLYWOOD PLANK, 5/8'' THICKNESSC. HAIRPIN LEGS

MATERIALS REQUIRED

1 - Borealis stepping stone2 -Three hairpin Legs legs of desired height3 - Premium Construction Adhesive4 - Pressure Treated Plank, 5/8'' thickness5 - Alliance Wet Cast Natural Look Finish, Zero Gloss Sealer

4 - Cover the entire concrete stonewith the Alliance Wet Cast NaturalLook Finish, Zero Gloss Sealer (orlow gloss sealer if you prefer). Atleast 2 coats are recommended. Letdry for 24 hours between coats.

1'-3

"

2'-0"

2'-0

"

1 - Cut the pressure treatedplank to match the shape ofthe stone with a jigsaw ormitre saw.

2 - Glue the pressure treatedplank to the bottom of thestone, keeping in mind toline-up the twists and curvesof both the plank and stone.

3 - Fasten the legs onto thePlywood plank.

TOOLS REQUIRED

1 - Screwdriver or drill2 - Jigsaw OR Mitre Saw

BA

C

ROW-BY-ROW DRAWINGS


136

Gas-Powered Tools ཎ 1 Jumping Jack

ཎ 1 Reversible Vibratory Plate (4-5,000 lb C.F.)

ཎ 1 Reversible Vibratory Plate (8-12,000 lb C.F.)

ཎ 2 Quick Cuts / Demo Saw

ཎ 1 Backpack Blower

ཎ 1 3-5 GPM Power Washer

ཎ 1 Hose with nozzle

Electric/Battery-Powered Tools ཎ 2 Angle Grinder 4 1/2”

ཎ 2 Angle Grinder 9”

ཎ 1 Hammer Drill (with core & bits)

ཎ 1 Vacuum Lifting Machine

ཎ 2 Commercial-Grade Extension Cords

Layout & Grading

ཎ 20 Grade Stakes / Nail or Concrete Pins 2’



ཎ 40 StringAlong Collars

ཎ 1 Laser with Tripod

ཎ 1 Laser Rod or Stick (0+0 benchmark)

ཎ 10 rolls Masonry String

ཎ 2 Giant Chalkline

ཎ 1 Chalk (refill)

ཎ 6 Measuring Tape 25’

ཎ 6 Measuring Tape 35’

ཎ 2 Measuring Tape Reel 300’

Other... ཎ 1 Tool Kit

ཎ 2 Tin Snips

ཎ 1 Large Folding Square

ཎ 2 Carpenter Square 16” x 24”

ཎ 4 Quick Square 7” x 7”

ཎ 4 Pointed Shovels

ཎ 4 Square Shovels

ཎ 2 Pickaxe

ཎ 2 Mattock

ཎ 3 Landscape Rakes

Grade Rails / Screed Guides ཎ 9 8’

ཎ 4 6’

ཎ 4 4’

ཎ 4 2’

ཎ 2 EA. Screed Boards 10’,8’,6’,4’ (mag. or alu.)

Levels ཎ 4 Torpedo Level

ཎ 2 2’

ཎ 4 4’

ཎ 1 6’

ཎ 1 8’

HARDSCAPER’S MASTER TOOL LIST


ཎ 2 Lute/Asphalt Rakes

ཎ 1 The Pounder

ཎ 1 12” x 12” Hand Tamper

ཎ 4 Small Dead Blow

ཎ 2 Large Dead Blow

ཎ 2 Mason Hammer

ཎ 2 2-3 lbs Pound Maul

ཎ 2 2” Chisel

ཎ 2 4” Chisel

ཎ 2 Caulk/Glue Guns 10 oz

ཎ 2 Caulk/Glue Guns 20 oz

ཎ 2 Wheel Barrows

ཎ 2 Rough Brooms

ཎ 2 Finishing Brooms

ཎ 4 Diesel Satefy Can (yellow)

ཎ 1 Gas Can (red)

ཎ 2 Mixed Fuel Can

ཎ 1 Slab Splitter

ཎ 1 Paver Splitter

ཎ 1 Block Splitter

ཎ 4 SlabGRABBER

ཎ 1 SlabHANDLER

ཎ 1 Ergo XL

ཎ 1 BL-980

ཎ 1 BL-450

ཎ 1 BL-109

ཎ 2 BL-100 Wall Slab Lifters

ཎ 1 Quick-E-Hammer

ཎ 1 pr Quick-E-Lifters

ཎ 1 Quick-E-Scribe

ཎ 1 QuickDRAW

ཎ 1 box Soap Stone

ཎ 1 box Red Lead Pencils

ཎ 1 box Black Markers (Sharpie)

ཎ 1 box Construction Crayons

ཎ 1 Quick E-Gauge

ཎ 2 Quick-E-Wall Screed System

ཎ 1 Paver Extractor

ཎ 1 Paver Adjuster Persuader

ཎ 8 Utility Knives

ཎ 64 Utility Knife Blades

ཎ 2 Small Finishing Trowels

ཎ 1 Float Trowel

Specialty Tools

Safety Equipment

ཎ 144 Masks N95

ཎ 4 Masks HEPA

ཎ 4 Masks Refill Cartridges

ཎ 144 Safety Glasses

ཎ 4 Attenuators (hearing protection)

ཎ 200 Attenuators (hearing protection — ear plugs)

ཎ 4 Hard Hats

ཎ 1 First Aid Kit

ཎ 1 box Antiseptic Wipes


Download this guide, along with dozens of other construction guides at:

techo-bloc.com/support-manual

Documents

CONTRACTOR SUPPORT MANUAL · 4 pavement on synthetic base - cross-section joint fill aggregate - fully consolidated techo-bloc paving stone overlay - astm c936, sca 231 - 45-100 mm