Upload
lynhu
View
230
Download
7
Embed Size (px)
Citation preview
CONTENTS
IH-1-1 through IH-1-145ENGINES...............................................................................................SECTION 1
IH-2-146 through IH-2-169ENGINE SYSTEMS..............................................................................SECTION 2
IH-3-170 through IH-3-187ELECTRICAL..........................................................................................SECTION 3
IH-4-188 through IH-4-201POWER TRAIN.....................................................................................SECTION 4
IH-5-202 through IH-5-207WHEELS AND AXLES..........................................................................SECTION 5
IH-6-208 through IH-6-211HITCH AND HYDRAULICS..................................................................SECTION 6
IH-7-212 through IH-7-219FORAGE AND HARVESTING..............................................................SECTION 7
IH-8-219 through IH-8-224IMPLEMENTS AND BEARINGS........................................................SECTION 8
IH-9-225 through IH-9-239MISCELLANEOUS................................................................................SECTION 9
Important Ordering Information
OEM numbers are used only for identification. All parts shown in this catalog are represented and
sold as replacement parts only, priced each unless noted otherwise.
• Part Numbers
For time savings, ease of ordering and better customer service, we have three types of Engine Kits
Available.
• Engine Kits
EOK - Engine Overhaul Kit • BEK - Basic Engine Kit • BIF - Basic In-Frame Kit
These kits are available for most of the tractor models that we service with engine parts. Each engine
page lists the contents of our EOK, BEK and BIF for that specific engine plus a separate listing of parts
which can be ordered individually.
For ease of ordering, our PK kits contain pistons, piston pins, pin retainers, piston rings, cylinder
sleeves & sleeve seals(where noted) for one complete engine. Our PRS kits contain piston rings for
• Piston & Ring Sets
one complete engine. Unless otherwise noted, we make no representation that our piston rings fit
pistons available from other suppliers.
We are aware of some interchangeability of tractor engine parts for other International Harvester applications (Combines, Forage
Harvesters, Cotton Harvesters, & Power Plants); Some of these applications are listed on the tractor engine pages, otherwise
no attempt is made to suggest other applications.
Alphabetical Index Follows
IH-Iwww.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Replacement parts to fit
I.H.C.
ALPHABETICAL INDEX
A
Air Cleaner Bowl, 154
Air Conditioning Compressors, 225
Alternator, 183 to 184
Brush, 184
Diode Trio, 184
Pulley, 184
Repair Kit, 184
Wiring Harness, 181
Ammeter, 182
Axle
Axle & Parts, 219
Bearings, Front, 202, 220
Seals, 195 to 196, 202, 219 to 220
Tie Rod Ends, Front, 204
B
Backrest, 238
Baler Parts, 217
Seal, Oil, 189, 195 to 196, 202, 219 to 220
Teeth, 214
Teeth, Pickup, 214
Ball, Disc Brake, 188
Battery Box Covers, 180
Battery Boxes, 179
Bearings
Ball, 157, 184, 194, 196, 213, 219 to 220, 222
Ball, Extended Spherical with Lock Collar, Re-lube, 222
Ball, Extended Spherical with Lock Collar, Sealed, 222
Ball, Spherical with Lock Collar, Re-lube, 222
Ball, Spherical with Lock Collar, Sealed, 222
Clutch, Pilot, 193
Clutch, Release, 193
Collar, Lock, 223
Disc, 157, 184, 194, 196, 213, 219 to 220, 222
Flanges, 220, 223
Roller, 157, 184, 194, 196, 213, 219 to 220, 222
Tapered Cups & Cones, 202, 220
Transmission, 202
Wheel, Front, 202, 220
Blade, Fan
International Harvester, 228
Blower Motor
International Harvester, 228
Blower Switch
International Harvester, 226
Blower Wheel
International Harvester, 228
Bowl, Air Cleaner, 154
Bowl, Fuel, 151
Bowl, Fuel Sediment, 151
Box, Battery, 179
Bracket, Light, 187
Brakes
Ball, Disc, 188
Brakes (continued)
Band, 189
Discs, 188 to 189
Drum, 188 to 189
Parts, 188 to 189
Shoes, 188 to 189
Spring, 188 to 189
Brush, Alternator, 184
Bulb, Light, 186 to 187
C
Cab Liner Kits, 233
Cab, Weather, 233
Cable, Choke, 187, 194
Cable, Shut-off, 187, 194
Canopies, 233
Caps, Fuel Tank, 152
Caps, Radiator, 160
Carburetor, 148
Float, 149
Kits, 146 to 147
Needle, 148
Shaft, 148
Chain, Corn Head Gathering, 213
Clamp, Cultivator Wheel, 219
Clamp, Exhaust, 166 to 168
Clamp, Light, 185
Closing Wheel, 219
Clutch
Bearing, Pilot, 190, 193
Bearing, Release, 190, 193
Discs, 190, 192 to 193
Kits, Complete, 190 to 191, 193
Pressure Plate, 193
PTO, 195
PTO Discs, 195
Coils, Ignition, 171 to 173, 175
Collar, Bearing Lock, 223
Combine Parts, 212 to 213, 218
Blades, Sickle, 216
Guards, Sickle, 216
Knives, Sickle, 216
Section, Sickle, 215 to 216
Teeth, Pickup, 214
Compressor, Air Conditioning, 225
Cooling Systems
Caps, Radiator, 160
Clamps, Hose, 161
Fan, Blade, 157
Hoses, 161
Kits, Water Pumps, 157
Radiators, 158
Water Pumps, 156
Corn Head Gathering Chain, 213
Couplers, Female Hydraulic, 208
IH-IIwww.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Replacement parts to fit
I.H.C.
Couplers, Male Hydraulic, 208
Cover, Battery Box, 180
Crankshaft Pulley, 145
Cushion, 238
Cylinder, Steering, 207
D
Decals, 233
Disc Bearings, 157, 184, 194, 196, 213, 219 to 220, 222
Disc, Brake, 188
Disc, Clutch, 192
E
Elbow, Exhaust, 165
Electrical
Alternators, 183 to 184
Ammeter, 182
Bracket, Light, 187
Brush, Alternators, 184
Bulb, Light, 186 to 187
Caps, 171, 173
Clamp, Light, 185
Coils, Ignition, 171 to 173, 175
Condensor, 170 to 173
Diode, Alternator, 184
Distributors, 172 to 173
Drives, Starters, 177 to 178
Electronic Ignition Kit, 170 to 171, 174
Gasket, Light Lens, 187
Gauge, Voltmeter, 183
Kit, Tune-up, 170 to 171, 173
Lens, Light, 187
Light, Warning, 186
Lights, 185
Points, 170 to 173
Pulley, Alternator, 184
Rectifier, Alternators, 184
Regulator, Voltage, 178 to 179
Rim, Light, 187
Rotors, 171, 173
Solenoid, Starter, 171 to 173, 175
Spark Plug Wire Sets, 170 to 171, 173
Spark Plugs, 170 to 173
Spring, Starter, 177
Starter Drive, 177 to 178
Starters, 176
Switch, 175, 178
Switch, Ignition, 175, 178
Switch, Light, 175, 178
Switch, Starter, 175, 178
Voltmeter, 183
Wires, Spark Plug, 170 to 171, 173
Wiring Harness, Alternator, 181
Emblem, Hood, 230
Engines
Caps, Fuel Tank, 152
Caps, Radiator, 160
Clamps, Mufflers, 166 to 168
Engines (continued)
Elbow, Exhuast, 165
Fan, Cooling, 157
Filters, Air, 154
Filters, Fuel, 151
Filters, Oil, 155
Gasket Kits, 165
Gaskets, 165
Gaskets, Manifold, 165
Gauge, Oil Pressure, 164
Gauge, Water Temperature, 157
Kit, See page VI to XIII for complete application listing, 1 to 144
Manifolds, 164 to 165
Mufflers, 167 to 168
Oil Level Indicator, 155
Pumps, Water, 156
Pumps, Water, Repair Kit, 157
Exhaust System
Caps, Rain, 166 to 169
Clamps, 166 to 168
Elbow, 165
Gaskets, Manifold, 165
Manifolds, 164 to 165
Mufflers, 167 to 168
Rain Caps, 166 to 169
Expansion Valve
International Harvester, 227
F
Fan Blade
International Harvester, 228
Fan, Cooling, 157
Filters, 151
Air, 154
Fuel, 151
Oil, Engine, 155
Oil, Hydraulic, 209
Flangettes, Bearing, 223
Float, Carburetor, 149
Flywheel Ring Gear, 178
Flywheels, 145
Fuel Systems, 149 to 150, 152, 160
Bowl, Filter, 151
Caps, Fuel Tank, 152
Carburetors, 148, 151
Filter, Air, 154
Filter, Fuel, 151
Floats, Carburetor, 149, 151
Gasket, Sediment Bowl, 151
Gaskets, Carburetors, 146, 151
Kits, Carburetors, 146 to 147, 151
Lever, Throttle, 149
Line, 150
Needle & Seat, 148
Needle, Carburetor, 148
Pumps, Lift, 152
Screen, Sediment, 151
Shaft, Carburetor, 148, 151
IH-IIIwww.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Replacement parts to fit
I.H.C.
Throttle Lever, 149
Valve, Float, 148, 151
G
Gas Line, 150
Gasket, Fuel Bowl, 151
Gasket, Light Lens, 187
Gaskets, Exhaust, 165
Gauge Wheel, 219
Gauges
Ammeter, 182
Oil Level Indicator, Engine, 155
Pressure, Engine Oil, 164
Temperature, Water, 157
Voltmeter, 183
Gear, Camshaft, 145
Gear, Starter Ring, 178
H
Hardener, Paint, 237
Hardware
Bolts, 182, 203, 207, 219, 232
Nuts, 182, 203, 207, 219, 232
Washers, 182, 203, 207, 219, 232
Head, Engine Cylinder, 145
Headrest, 238
Hood Decals, 233
Hood Emblem, 230
Hose Clamps, 161
Hose
Fuel, 150
Hydraulic Assemblies, 209
Radiator, 161
Hubs, 213, 217 to 219
Hydraulic, 210
Couplers, Female, 208
Filter, 209
Hose Assemblies, 209
Kit, Pumps, 210
Pumps, 210
Pumps, Shaft, 210
Tips, Male, 208
I
Ignition Coil, 172
Ignition Kit, Electronic, 170 to 171, 174
International Harvester
Blower Motor, 228
Blower Switch, 226
Blower Wheel, 228
Expansion Valve, 227
Fan Blade, 228
Pressure Switch, 226
Receiver Drier, 227
Relay Switch, 227
Thermostatic Switch, 226
K
Kits
Clutch, 190 to 191
Electronic Ignition, 170 to 171, 174
Engine, See page VI to XIII for complete application listing, 1 to 144
Knobs, 187, 194
L
Lens, Light, 187
Lever, Throttle, 149
Light, 185
Bracket, 187
Bulb, 186 to 187
Lens, 187
Ring, 187
Warning, 186
Liner, Cab Interior, 233
Lock Collar, Bearing, 223
M
Manifold, 164 to 165
Mower Parts, 213 to 217
Blade Bolt, Rotary Cutter, 214
Blades, Disc Mower, 214
Blades, Rotary Cutter, 214
Blades, Sickle, 216
Disc, Slip Clutch, 214
Guards, Disc Mower, 216
Guards, Sickle Mower, 216
Knives, Sickle, 216
Section, Sickle, 215 to 216
Stone Guard, Disc Mower, 214
Teeth, 214
Mufflers, 167 to 168
N
Needle & Seat, Carburetor, 148
O
Oil Filter, Engine, 155
Oil Level Indicator, 155
Oil Pressure Gauge, 164
P
Paint
Aluminum, 236
Black, 236
Hardener, 237
OEM, 236
Primer, 237
White, 236
Planter Parts
Seal, Oil, 189, 195 to 196, 202, 219 to 220
Wheel, 219
Pressure Switch
International Harvester, 226
Primer, 237
PTO Parts, 195 to 196, 232
Pulley, Alternator, 184
IH-IVwww.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Replacement parts to fit
I.H.C.
Pulleys, 213, 217 to 219
Pumps
Fuel Lift, 152
Water, Engine, 156
Water, Repair Kit, 157
R
Radiator Cap, 160
Radiator, Hose, 161
Radiators, 158
Rain Cap, Exhaust, 166 to 169
Receiver Drier
International Harvester, 227
Rectifier, Alternator, 184
Relay Switch
International Harvester, 227
Rim, Light, 187
Rim, Rear Wheel, 207
Ring Gear, Starter, 178
Roller Chain
Chain Assemblies, 213
S
Screen, Fuel, 151
Seals, 189, 195 to 196, 202, 219 to 220
Wheel, Front, 202
Seats
Armrests, 238 to 239
Backrests, 238
Belt, safety, 238 to 239
Cushions, 238
Headrest, 238
Industrial, 237
Lawn & Garden, 237
Pan, 237
Shock, Suspension, 238
Spring, suspension, 238 to 239
Suspension, Air Adjust, 237
Suspension, Mechanical, 237
Sheet Metal
Battery Box Covers, 180
Battery Boxes, 179, 229, 232
Bumpers, 229, 232
Fenders, 229, 232
Grills, 229, 232
Hood, 229, 232
Panels, Hood, 229, 232
Shock, Suspension, 238
Spark Plug, Wire Sets, 170 to 171, 173
Spark Plugs, 170 to 173
Spindle, Front, 205
Spring, Starter Drive, 177
Spring, Suspension, 238
Sprockets, 213, 217 to 219
Starter, 176
Drive Spring, 177
Ring Gear, 178
Steering
Cylinder, 207
Cylinder, Power, 203, 206
Drag Links, 203, 206
Gear Box Assembly, 203, 206
Joint, Universal, 203, 206
Spindle, 205
Tie Rod Ends, 203 to 204, 206
U-Joint, 203
Wheel, 203, 206
Switches
Blower, International Harvester, 226
Pressure, International Harvester, 226
Relay, International Harvester, 227
Thermostatic, International Harvester, 226
T
Thermostatic Switch
International Harvester, 226
Three Point Hitch, 209
Drawbar, 209
Hitch Pins, 209 to 210
Lift Arm, 209
Pin, Lift Arm, 209
Pin, Top Link, 209
Repair End, Lift Arm, 209
Repair End, Top Link, 209
Top Link, Category 0, 209
Top Link, category 1, 209
Top Link, Category II, 209
Top Link, Category III, 209
Throttle Lever, 149
Tie Rod Ends, 204
Transmission
Bearing, 202
Disc, Clutch, 192
Kits, Clutch, 190 to 191
Transmission Gears, 190, 197 to 201
Transmission Shaft, 190, 197 to 201
U
U-Joint, Steering, 203
Upholstery, Cab, 233
V
Valve, Expansion
International Harvester, 227
Voltage Regulator, 178 to 179
Voltmeter, 183
W
Warning Light, 186
Water Pump Repair Kit, 157
Water Pumps, 156
Water Temperature Gauge, 157
Weather Cap, Exhaust, 166 to 169
Wheel Clamp, Cultivator, 219
Wheel, Blower
International Harvester, 228
IH-Vwww.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Replacement parts to fit
I.H.C.
Wheel, Closing, 219
Wheel, Gauge, 219
Wheel, Planter, 219
Wheel
Bearings, Front, 202, 220
Bolt, Front Wheel, 207, 219
Bolt, Rear Wheel, 207, 219
Front, 207, 219
Nut, Rear Wheel, 207, 219
Rear, 207, 219
Rim, Rear, 207
Seal, Front, 202
Wiring Harness, 181
IH-VIwww.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Replacement parts to fit
I.H.C.
Engine Index
Model FuelMachine
Type Engine model (CID) Page No.
A Gas Tractor C113 Stepped Head Piston IH-1-7 to IH-1-8
A Gas Tractor C113 Flat Head Piston IH-1-3 to IH-1-4
AV Gas Tractor C113 Stepped Head Piston IH-1-7 to IH-1-8
AV Gas Tractor C113 Flat Head Piston IH-1-3 to IH-1-4
B Gas Tractor C113 Stepped Head Piston IH-1-7 to IH-1-8
B Gas Tractor C113 Flat Head Piston IH-1-3 to IH-1-4
B250 Diesel Tractor BD144 IH-1-87 to IH-1-88
B275 Diesel Tractor BD144 IH-1-87 to IH-1-88
B276 Diesel Tractor BD144 IH-1-87 to IH-1-88
B414 Diesel Tractor BD154 IH-1-89 to IH-1-90
BN Gas Tractor C113 Stepped Head Piston IH-1-7 to IH-1-8
BN Gas Tractor C113 Flat Head Piston IH-1-3 to IH-1-4
C Gas Tractor C113 Stepped Head Piston IH-1-9 to IH-1-10
C Gas Tractor C113 Flat Head Piston IH-1-5 to IH-1-6
Cub Gas Tractor C60 (To engine s/n 261717) IH-1-1 to IH-1-2
Cub Lo-boy Gas Tractor C60 (To engine s/n 261717) IH-1-1 to IH-1-2
H Gas Tractor C152 Stepped Head Piston (To s/n 106907) IH-1-29 to IH-1-30
H Gas Tractor C152 Stepped Head Piston (s/n 391358 & up) IH-1-33 to IH-1-34
H Gas Tractor C152 Stepped Head Piston (s/n 106908 to 391357) IH-1-31 to IH-1-32
H Distillate Tractor C152 Flat Head Piston (To s/n 391357) IH-1-17 to IH-1-18
H Gas Tractor C152 Flat Head Piston (To s/n 106907) IH-1-21 to IH-1-22
H Distillate Tractor C152 Flat Head Piston (s/n 391358 & up) IH-1-19 to IH-1-20
H Gas Tractor C152 Flat Head Piston (s/n 391358 & up) IH-1-25 to IH-1-26
H Gas Tractor C152 Flat Head Piston (s/n 106908 to 391357) IH-1-23 to IH-1-24
HV Gas Tractor C152 Stepped Head Piston (To s/n 106907) IH-1-29 to IH-1-30
HV Gas Tractor C152 Stepped Head Piston (s/n 391358 & up) IH-1-33 to IH-1-34
HV Gas Tractor C152 Stepped Head Piston (s/n 106908 to 391357) IH-1-31 to IH-1-32
HV Distillate Tractor C152 Flat Head Piston (To s/n 391357) IH-1-17 to IH-1-18
HV Gas Tractor C152 Flat Head Piston (To s/n 106907) IH-1-21 to IH-1-22
HV Distillate Tractor C152 Flat Head Piston (s/n 391358 & up) IH-1-19 to IH-1-20
HV Gas Tractor C152 Flat Head Piston (s/n 391358 & up) IH-1-25 to IH-1-26
HV Gas Tractor C152 Flat Head Piston (s/n 106908 to 391357) IH-1-23 to IH-1-24
Hydro 70 Gas Tractor C291 IH-1-83 to IH-1-84
Hydro 86 Diesel Tractor D310 IH-1-123 to IH-1-124
Hydro 86 Gas Tractor C291 IH-1-83 to IH-1-84
M Gas Tractor C248 Stepped Head Piston (To s/n 278049) IH-1-65 to IH-1-66
M Gas Tractor C248 Stepped Head Piston (s/n 278050 & up) IH-1-67 to IH-1-68
continues
IH-VIIwww.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Replacement parts to fit
I.H.C.
Engine Index
Model FuelMachine
Type Engine model (CID) Page No.
M Gas Tractor C248 Flat Head Piston (To s/n 278049) IH-1-61 to IH-1-62
M Gas Tractor C248 Flat Head Piston (s/n 278050 & up) IH-1-63 to IH-1-64
M Distillate Tractor C248 (To s/n 278049) IH-1-57 to IH-1-58
M Distillate Tractor C248 (s/n 278050 & up) IH-1-59 to IH-1-60
MV Gas Tractor C248 Stepped Head Piston (To s/n 278049) IH-1-65 to IH-1-66
MV Gas Tractor C248 Stepped Head Piston (s/n 278050 & up) IH-1-67 to IH-1-68
MV Gas Tractor C248 Flat Head Piston (To s/n 278049) IH-1-61 to IH-1-62
MV Gas Tractor C248 Flat Head Piston (s/n 278050 & up) IH-1-63 to IH-1-64
MV Distillate Tractor C248 (To s/n 278049) IH-1-57 to IH-1-58
MV Distillate Tractor C248 (s/n 278050 & up) IH-1-59 to IH-1-60
O4 Gas Tractor C152 Stepped Head Piston (To s/n 33339) IH-1-29 to IH-1-30
O4 Gas Tractor C152 Stepped Head Piston (s/n 33340 & up) IH-1-35 to IH-1-36
O4 Distillate Tractor C152 Flat Head Piston (To s/n 33339) IH-1-17 to IH-1-18
O4 Gas Tractor C152 Flat Head Piston (To s/n 33339) IH-1-21 to IH-1-22
O4 Distillate Tractor C152 Flat Head Piston (s/n 33340 & up) IH-1-19 to IH-1-20
O4 Gas Tractor C152 Flat Head Piston (s/n 33340 & up) IH-1-27 to IH-1-28
O6 Gas Tractor C248 Stepped Head Piston (To s/n 35463) IH-1-65 to IH-1-66
O6 Gas Tractor C248 Stepped Head Piston (s/n 35464 & up) IH-1-67 to IH-1-68
O6 Gas Tractor C248 Flat Head Piston (To s/n 35463) IH-1-61 to IH-1-62
O6 Gas Tractor C248 Flat Head Piston (s/n 35464 & up) IH-1-63 to IH-1-64
O6 Distillate Tractor C248 (To s/n 35463) IH-1-57 to IH-1-58
O6 Distillate Tractor C248 (s/n 35464 & up) IH-1-59 to IH-1-60
OS4 Gas Tractor C152 Stepped Head Piston (To s/n 33339) IH-1-29 to IH-1-30
OS4 Gas Tractor C152 Stepped Head Piston (s/n 33340 & up) IH-1-35 to IH-1-36
OS4 Distillate Tractor C152 Flat Head Piston (To s/n 33339) IH-1-17 to IH-1-18
OS4 Gas Tractor C152 Flat Head Piston (To s/n 33339) IH-1-21 to IH-1-22
OS4 Distillate Tractor C152 Flat Head Piston (s/n 33340 & up) IH-1-19 to IH-1-20
OS4 Gas Tractor C152 Flat Head Piston (s/n 33340 & up) IH-1-27 to IH-1-28
OS6 Gas Tractor C248 Stepped Head Piston (To s/n 35463) IH-1-65 to IH-1-66
OS6 Gas Tractor C248 Stepped Head Piston (s/n 35464 & up) IH-1-67 to IH-1-68
OS6 Gas Tractor C248 Flat Head Piston (To s/n 35463) IH-1-61 to IH-1-62
OS6 Gas Tractor C248 Flat Head Piston (s/n 35464 & up) IH-1-63 to IH-1-64
OS6 Distillate Tractor C248 (To s/n 35463) IH-1-57 to IH-1-58
OS6 Distillate Tractor C248 (s/n 35464 & up) IH-1-59 to IH-1-60
Super A Gas TractorC113 Stepped Head Piston (Tractor s/n 255418-
310299)IH-1-9 to IH-1-10
Super A Gas Tractor C113 Stepped Head Piston (To tractor s/n 255417) IH-1-7 to IH-1-8
continues
IH-VIIIwww.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Replacement parts to fit
I.H.C.
Engine Index
Model FuelMachine
Type Engine model (CID) Page No.
Super A Gas Tractor C113 Flat Head Piston (Tractor s/n 255418-310299) IH-1-5 to IH-1-6
Super A Gas Tractor C113 Flat Head Piston (To tractor s/n 255417) IH-1-3 to IH-1-4
Super A-1 Gas Tractor C123 Stepped Head Piston (s/n 310300 & up) IH-1-11 to IH-1-12
Super AV Gas TractorC113 Stepped Head Piston (Tractor s/n 255418-
310299)IH-1-9 to IH-1-10
Super AV Gas Tractor C113 Stepped Head Piston (To tractor s/n 255417) IH-1-7 to IH-1-8
Super AV Gas Tractor C113 Flat Head Piston (Tractor s/n 255418-310299) IH-1-5 to IH-1-6
Super AV Gas Tractor C113 Flat Head Piston (To tractor s/n 255417) IH-1-3 to IH-1-4
Super AV-1 Gas Tractor C123 Stepped Head Piston (s/n 310300 & up) IH-1-11 to IH-1-12
Super C Gas Tractor C123 Stepped Head Piston IH-1-11 to IH-1-12
Super H Gas Tractor C164 (Valve Length 5-5/16”) IH-1-39 to IH-1-40
Super H Gas Tractor C164 (Valve Length 5-15/32”) IH-1-41 to IH-1-42
Super H Distillate Tractor C164 (Valve Length 5-1/16”) IH-1-37 to IH-1-38
Super HV Gas Tractor C164 (Valve Length 5-5/16”) IH-1-39 to IH-1-40
Super HV Gas Tractor C164 (Valve Length 5-15/32”) IH-1-41 to IH-1-42
Super HV Distillate Tractor C164 (Valve Length 5-1/16”) IH-1-37 to IH-1-38
Super M Gas Tractor C264 IH-1-75 to IH-1-76
Super MTA Gas Tractor C264 IH-1-75 to IH-1-76
Super W4 Gas Tractor C164 (Valve Length 5-5/16”) IH-1-39 to IH-1-40
Super W4 Gas Tractor C164 (Valve Length 5-15/32”) IH-1-41 to IH-1-42
Super W4 Distillate Tractor C164 (Valve Length 5-1/16”) IH-1-37 to IH-1-38
Super W6 Gas Tractor C264 IH-1-75 to IH-1-76
Super W6-TA Gas Tractor C264 IH-1-75 to IH-1-76
W4 Gas Tractor C152 Stepped Head Piston (To s/n 33339) IH-1-29 to IH-1-30
W4 Gas Tractor C152 Stepped Head Piston (s/n 33340 & up) IH-1-35 to IH-1-36
W4 Distillate Tractor C152 Flat Head Piston (To s/n 33339) IH-1-17 to IH-1-18
W4 Gas Tractor C152 Flat Head Piston (To s/n 33339) IH-1-21 to IH-1-22
W4 Distillate Tractor C152 Flat Head Piston (s/n 33340 & up) IH-1-19 to IH-1-20
W4 Gas Tractor C152 Flat Head Piston (s/n 33340 & up) IH-1-27 to IH-1-28
W400 Gas Tractor C264 (To engine s/n 163807) 1-5/16 Piston Pin IH-1-77 to IH-1-78
W400 Gas Tractor C264 (Engine s/n 163808 & up) 1 Piston Pin IH-1-79 to IH-1-80
W450 Gas Tractor C281 IH-1-81 to IH-1-82
W6 Gas Tractor C248 Stepped Head Piston (To s/n 35463) IH-1-65 to IH-1-66
W6 Gas Tractor C248 Stepped Head Piston (s/n 35464 & up) IH-1-67 to IH-1-68
W6 Gas Tractor C248 Flat Head Piston (To s/n 35463) IH-1-61 to IH-1-62
W6 Gas Tractor C248 Flat Head Piston (s/n 35464 & up) IH-1-63 to IH-1-64
W6 Distillate Tractor C248 (To s/n 35463) IH-1-57 to IH-1-58
continues
IH-IXwww.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Replacement parts to fit
I.H.C.
Engine Index
Model FuelMachine
Type Engine model (CID) Page No.
W6 Distillate Tractor C248 (s/n 35464 & up) IH-1-59 to IH-1-60
100 Gas Tractor C123 Stepped Head Piston IH-1-11 to IH-1-12
130 Gas Tractor C123 Flat Head Piston IH-1-13 to IH-1-14
140 Gas Tractor C123 Flat Head Piston IH-1-13 to IH-1-14
200 Gas Tractor C123 Stepped Head Piston IH-1-11 to IH-1-12
230 Gas Tractor C123 Flat Head Piston IH-1-13 to IH-1-14
238 Diesel Tractor BD154 IH-1-89 to IH-1-90
240 Gas Tractor C123 Flat Head Piston IH-1-13 to IH-1-14
300 Gas Tractor C169 (To s/n 48048) IH-1-43 to IH-1-44
300 Gas Tractor C169 (s/n 48049 & up) IH-1-45 to IH-1-46
330 Gas Tractor C135 (To engine s/n 100500) IH-1-15 to IH-4-16
340 Gas Tractor C135 (To engine s/n 100500) IH-1-15 to IH-4-16
350 Gas Tractor C175 IH-1-47 to IH-1-48
354 Diesel Tractor BD144 IH-1-87 to IH-1-88
364 Diesel Tractor BD154 IH-1-89 to IH-1-90
384 Diesel Tractor BD154 IH-1-89 to IH-1-90
400 Gas Tractor C264 (To engine s/n 163807) 1-5/16 Piston Pin IH-1-77 to IH-1-78
400 Gas Tractor C264 (Engine s/n 163808 & up) 1 Piston Pin IH-1-79 to IH-1-80
424 Diesel Tractor BD154 IH-1-89 to IH-1-90
434 Diesel Tractor BD154 IH-1-89 to IH-1-90
434 Diesel Tractor BD144 IH-1-87 to IH-1-88
444 Diesel Tractor BD154 IH-1-89 to IH-1-90
450 Gas Tractor C281 IH-1-81 to IH-1-82
454 Diesel Tractor D179 IH-1-91 to IH-1-92
460 Diesel Tractor D236 Engine s/n 5611 to s/n 10983 IH-1-99 to IH-1-100
460 Diesel Tractor D236 Engine s/n 13754 & up IH-1-103 to IH-1-104
460 Diesel Tractor D236 Engine s/n 10984 to s/n 13753 IH-1-101 to IH-1-102
460 Gas Tractor C221 (To s/n 35093) IH-1-49 to IH-1-50
460 Gas Tractor C221 (s/n 35094 & up) IH-1-51 to IH-1-52
464 Diesel Tractor D179 IH-1-91 to IH-1-92
474 Diesel Tractor D206 IH-1-97 to IH-1-98
484 Diesel Tractor D179 IH-1-91 to IH-1-92
504 Diesel TractorD188 Farmall Tractors to Engine s/n 12092; Inter-
national Tractors to Engine S/N 11524IH-1-93 to IH-1-94
504 Diesel TractorD188 Farmall Tractors Engine s/n 12093 & up; International Tractors Engine s/n 11525 & up
IH-1-95 to IH-1-96
544 Diesel Tractor D239 IH-1-111 to IH-1-112
continues
IH-Xwww.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Replacement parts to fit
I.H.C.
Engine Index
Model FuelMachine
Type Engine model (CID) Page No.
560 Diesel Tractor D282 Engine s/n 6766 to 29264 IH-1-113 to IH-1-114
560 Diesel Tractor D282 Engine s/n 44822 & up IH-1-119 to IH-1-120
560 Diesel Tractor D282 Engine s/n 40699 to 44821 IH-1-117 to IH-1-118
560 Diesel Tractor D282 Engine s/n 29265 to 40698 IH-1-115 to IH-1-116
560 Gas Tractor C263 (To engine s/n 36693) IH-1-69 to IH-1-70
560 Gas Tractor C263 (Engine s/n 36694 & up) IH-1-71 to IH-1-72
574 Diesel Tractor D239 IH-1-111 to IH-1-112
584 Diesel Tractor D206 IH-1-97 to IH-1-98
585 Diesel Tractor D206 IH-1-97 to IH-1-98
606 Diesel Tractor D236 to Engine s/n 13753 IH-1-105 to IH-1-106
606 Diesel Tractor D236 Engine s/n 16621 & Up IH-1-109 to IH-1-110
606 Diesel Tractor D236 Engine s/n 13754 to 16620 IH-1-107 to IH-1-108
606 Gas Tractor C221 (To s/n 35093) IH-1-53 to IH-1-54
606 Gas Tractor C221 (s/n 35094 & up) IH-1-55 to IH-1-56
656 Diesel Tractor D282 To Engine s/n 44821 IH-1-117 to IH-1-118
656 Diesel Tractor D282 Engine s/n 71778 and up IH-1-121 to IH-1-122
656 Diesel Tractor D282 Engine s/n 44822 to 71777 IH-1-119 to IH-1-120
656 Gas Tractor C263 IH-1-73 to IH-1-74
660 Diesel Tractor D282 Engine s/n 44822 & up IH-1-119 to IH-1-120
660 Diesel Tractor D282 Engine s/n 4370 to 29264 IH-1-113 to IH-1-114
660 Diesel Tractor D282 Engine s/n 40699 to 44821 IH-1-117 to IH-1-118
660 Diesel Tractor D282 Engine s/n 29265 to 40698 IH-1-115 to IH-1-116
660 Gas Tractor C263 (To engine s/n 38981) IH-1-69 to IH-1-70
660 Gas Tractor C263 (Engine s/n 38982 & up) IH-1-71 to IH-1-72
664 Diesel Tractor D239 IH-1-111 to IH-1-112
666 Gas Tractor C291 IH-1-83 to IH-1-84
674 Diesel Tractor D239 IH-1-111 to IH-1-112
684 Diesel Tractor D239 IH-1-111 to IH-1-112
686 Diesel Tractor D310 IH-1-123 to IH-1-124
686 Gas Tractor C291 IH-1-83 to IH-1-84
706 Diesel Tractor D310 IH-1-123 to IH-1-124
706 Diesel Tractor D282 To Engine s/n 44821 IH-1-117 to IH-1-118
706 Diesel Tractor D282 Engine s/n 71778 and up IH-1-121 to IH-1-122
706 Diesel Tractor D282 Engine s/n 44822 to 71777 IH-1-119 to IH-1-120
706 Gas Tractor C291 IH-1-83 to IH-1-84
706 Gas Tractor C263 IH-1-73 to IH-1-74
756 Diesel Tractor D310 IH-1-123 to IH-1-124
continues
IH-XIwww.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Replacement parts to fit
I.H.C.
Engine Index
Model FuelMachine
Type Engine model (CID) Page No.
756 Gas Tractor C291 IH-1-83 to IH-1-84
766 Gas Tractor C291 IH-1-83 to IH-1-84
786 Diesel Tractor D358 IH-1-125 to IH-1-126
806 Diesel Tractor D361 IH-1-127 to IH-1-128
806 Gas Tractor C301 IH-1-85 to IH-1-86
815 DieselCom-bine
D414 IH-1-135 to IH-1-136
815 DieselCom-bine
D407 Piston Pin Diameter 1-1/2” IH-1-131 to IH-1-132
826 Diesel Tractor D358 IH-1-125 to IH-1-126
826 Gas Tractor C301 IH-1-85 to IH-1-86
856 Diesel Tractor D407 Piston Pin Diameter 1-1/2” IH-1-131 to IH-1-132
856 Gas Tractor C301 IH-1-85 to IH-1-86
886 Diesel Tractor D358 Chassis s/n 14472 and up IH-1-125 to IH-1-126
915 DieselCom-bine
DT414 & DT414B Turbo IH-1-137 to IH-1-138
915 DieselCom-bine
DT407 Piston Pin Diameter 1-5/8” IH-1-133 to IH-1-134
966 Diesel Tractor D414 IH-1-135 to IH-1-136
1026 Diesel Tractor DT407 Piston Pin Diameter 1-1/2” IH-1-131 to IH-1-132
1066 Diesel Tractor DT414 & DT414B Turbo IH-1-137 to IH-1-138
1086 Diesel Tractor DT414 & DT414B Turbo IH-1-137 to IH-1-138
1206 Diesel Tractor DT361 IH-1-129 to IH-1-130
1256 Diesel Tractor DT407 Piston Pin Diameter 1-1/2” IH-1-131 to IH-1-132
1456 Diesel Tractor DT407 Piston Pin Diameter 1-5/8” IH-1-133 to IH-1-134
1460 DieselCom-bine
DT436 & DT436B Turbo IH-1-139 to IH-1-140
1466 Diesel Tractor DT436 & DT436B Turbo IH-1-139 to IH-1-140
1470 DieselCom-bine
DT466B, DTI466B, DT466C, & DTI466C IH-1-143 to IH-1-144
1480 DieselCom-bine
DT466B, DTI466B, DT466C, & DTI466C IH-1-143 to IH-1-144
1480 DieselCom-bine
DT436 & DT436B Turbo IH-1-139 to IH-1-140
1486 Diesel Tractor DT436 & DT436B Turbo IH-1-139 to IH-1-140
1566 Diesel Tractor DT436 & DT436B Turbo IH-1-139 to IH-1-140
1586 Diesel Tractor DT436 & DT436B Turbo IH-1-139 to IH-1-140
2424 Diesel Tractor BD154 IH-1-89 to IH-1-90
2444 Diesel Tractor BD154 IH-1-89 to IH-1-90
continues
IH-XIIwww.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Replacement parts to fit
I.H.C.
Engine Index
Model FuelMachine
Type Engine model (CID) Page No.
2504 Diesel TractorD188 Farmall Tractors to Engine s/n 12092; Inter-
national Tractors to Engine S/N 11524IH-1-93 to IH-1-94
2504 Diesel TractorD188 Farmall Tractors Engine s/n 12093 & up; International Tractors Engine s/n 11525 & up
IH-1-95 to IH-1-96
2544 Diesel Tractor D239 IH-1-111 to IH-1-112
2606 Diesel Tractor D236 to Engine s/n 13753 IH-1-105 to IH-1-106
2606 Diesel Tractor D236 Engine s/n 16621 & Up IH-1-109 to IH-1-110
2606 Diesel Tractor D236 Engine s/n 13754 to 16620 IH-1-107 to IH-1-108
2606 Gas Tractor C221 (To s/n 35093) IH-1-53 to IH-1-54
2606 Gas Tractor C221 (s/n 35094 & up) IH-1-55 to IH-1-56
2656 Diesel Tractor D282 To Engine s/n 44821 IH-1-117 to IH-1-118
2656 Diesel Tractor D282 Engine s/n 71778 and up IH-1-121 to IH-1-122
2656 Diesel Tractor D282 Engine s/n 44822 to 71777 IH-1-119 to IH-1-120
2656 Gas Tractor C263 IH-1-73 to IH-1-74
2706 Diesel Tractor D310 IH-1-123 to IH-1-124
2706 Diesel Tractor D282 To Engine s/n 44821 IH-1-117 to IH-1-118
2706 Diesel Tractor D282 Engine s/n 71778 and up IH-1-121 to IH-1-122
2706 Diesel Tractor D282 Engine s/n 44822 to 71777 IH-1-119 to IH-1-120
2706 Gas Tractor C291 IH-1-83 to IH-1-84
2706 Gas Tractor C263 IH-1-73 to IH-1-74
2756 Diesel Tractor D310 IH-1-123 to IH-1-124
2756 Gas Tractor C291 IH-1-83 to IH-1-84
2806 Diesel Tractor D361 IH-1-127 to IH-1-128
2806 Gas Tractor C301 IH-1-85 to IH-1-86
2826 Diesel Tractor D358 IH-1-125 to IH-1-126
2826 Gas Tractor C301 IH-1-85 to IH-1-86
2856 Diesel Tractor D407 Piston Pin Diameter 1-1/2” IH-1-131 to IH-1-132
2856 Gas Tractor C301 IH-1-85 to IH-1-86
3088 Diesel Tractor D358 To Engine s/n 121247 IH-1-125 to IH-1-126
3288 Diesel Tractor D358 To Engine s/n 111090 IH-1-125 to IH-1-126
3388 Diesel Tractor DT436 & DT436B Turbo IH-1-139 to IH-1-140
3514 Diesel TractorD188 Farmall Tractors to Engine s/n 12092; Inter-
national Tractors to Engine S/N 11524IH-1-93 to IH-1-94
3514 Diesel TractorD188 Farmall Tractors Engine s/n 12093 & up; International Tractors Engine s/n 11525 & up
IH-1-95 to IH-1-96
3588 Diesel Tractor DT466B, DTI466B, DT466C, & DTI466C IH-1-143 to IH-1-144
3788 Diesel Tractor DT466B, DTI466B, DT466C, & DTI466C IH-1-143 to IH-1-144
4166 Diesel Tractor DT436 & DT436B Turbo IH-1-139 to IH-1-140
continues
IH-XIIIwww.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Replacement parts to fit
I.H.C.
Engine Index
Model FuelMachine
Type Engine model (CID) Page No.
4186 Diesel Tractor DT436 & DT436B Turbo IH-1-139 to IH-1-140
4366 Diesel Tractor DT466 & DTI466 Turbo IH-1-141 to IH-1-142
4386 Diesel TractorDT466B, DTI466B, DT466C, & DTI466C Engine s/n
77300 & upIH-1-143 to IH-1-144
4386 Diesel Tractor DT466 & DTI466 Turbo To Engine s/n 74999 IH-1-141 to IH-1-142
5088 Diesel Tractor DT436 & DT436B Turbo IH-1-139 to IH-1-140
5288 Diesel Tractor DT466B, DTI466B, DT466C, & DTI466C IH-1-143 to IH-1-144
5488 Diesel Tractor DT466B, DTI466B, DT466C, & DTI466C IH-1-143 to IH-1-144
6388 Diesel Tractor DT436 & DT436B Turbo IH-1-139 to IH-1-140
6588 Diesel Tractor DT466B, DTI466B, DT466C, & DTI466C IH-1-143 to IH-1-144
6788 Diesel Tractor DT466B, DTI466B, DT466C, & DTI466C IH-1-143 to IH-1-144
7288 Diesel Tractor DT466B, DTI466B, DT466C, & DTI466C IH-1-143 to IH-1-144
7488 Diesel Tractor DT466B, DTI466B, DT466C, & DTI466C IH-1-143 to IH-1-144
21026 Diesel Tractor DT407 Piston Pin Diameter 1-1/2” IH-1-131 to IH-1-132
21206 Diesel Tractor DT361 IH-1-129 to IH-1-130
21256 Diesel Tractor DT407 Piston Pin Diameter 1-1/2” IH-1-131 to IH-1-132
21456 Diesel Tractor DT407 Piston Pin Diameter 1-5/8” IH-1-133 to IH-1-134
IH-XIVwww.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Replacement parts to fit
I.H.C.
Ring Set Interchangeability Notes
These notes refer to IH turbo diesel engines DT414, DT414B, DT436, DT436B, DT466, DT466B, DTI466B, DT466C and DTI466C.Each of those engine pages has a note under sleeve and piston kit referring to this page.
NotesThe OEM refers to “old style” and “new style” rings. Our supplier indicates that the major difference between these two sets is the #2 orintermediate ring. Both ring sets have keystone 1st and 2nd rings. Both 1st and 2nd rings have a barrel shaped, chrome plated face. The oilcontrol ring in both sets are double rail constructed and have a coil spring expander. Simply stated, our replacement ring set matchers theOEM sets in these details.
Ring set #687429C91 has a #2 ring with .065” – .078” gap. This is the set the OEM refers to as “New Style”.Ring set #684256C91 has a #2 ring with .020” – .030” gap, the OEM calls this “Old Style”. (OE continues to supply “Old Style.”)
CURRENTLY CURRENTLYSTOCKED STOCKED
CRANKCASE MTD. VALVE COVER MTD. 6842556C91* 687429C91** OLD NEWVENTILATION (OLD) VENTILATION (NEW) RINGS RINGS PISTONS PISTONS
X X XX X X
X X XX X XX X XX X X
* Has 2nd ring gap .020” – .030”**Has 2nd ring gap .065” – .078”
From this chart, you can see that the OEM indicates we can use the new piston and the 684256C91 (narrow gap)ring set with either the old or new crankcase vent system.
When we originally cataloged these parts we discussed the ring set with our vendor. They indicated the set we buy will replace either684256C91 or 687429C91 even though there is a difference in the #2 ring gap.For that reason we chose to use 687429C91 as our part number for a replacement ring set as this is the most recent OEM part number.However, we have changed the part number of our ring set 687429C91 to 684256C91, as our ring set has a #2 ring gap of .020” – .030”and is most closely identical to the OEM set.
Serial Number UsageWhen several models are affected by a serial number, models are separated from the serial number by a comma.EXAMPLE: 606, 2606, to engine S/N — Serial number applies to both 606 and 2606
When only one model is affected by a serial number, no comma is used to separate that model from the serial number.EXAMPLE: 4366, 4386 to engine S/N — Serial number applies only to 4386.
Note: Specific references are made to engine or chassis serial numberswhen the OE has listed this information.
Other serial numbers, not specifically listed as either engine or chassis bythe OE, are for reference and normally refer to engine serial numbers.
IH-XVwww.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Replacement parts to fit
I.H.C.
Piston & Ring KitFlat Head Piston
REPLACES
to s/n 264567. 1 used per engine
Piston & ring kit, standard. Contains piston,
rings, pins & retainers.
PRK60
Piston & ring kit, .020". Rebore Kit. Contains
pistons, rings, pins & retainers.
PRK60-020
Piston & ring kit, .040". Rebore Kit. Contains
pistons, rings, pins & retainers.
PRK60-040
Piston Ring SetREPLACES
Piston ring set, 2-5/8" standard bore. 2 @ 3/32",
1 @ 3/16" (1 used per engine)
PRS60
Piston ring set, .020"PRS60-020
Piston ring set, .040"PRS60-040
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)251247R2
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals & sleeves, where required)
GK7560S
Gasket set, headVGK7560
Gasket, oil pan251369R1
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides.
VOKH60
Valve, engine intake (4 used per engine)251260R1
Valve, engine exhaust (4 used per engine)251261R2
Spring, engine valve (8 used per engine)251262R2
Guide, engine valve (8 used per engine)352973R3
Valve key (16 used per engine)46209D
IH-1-1www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: Cub, Cub Lo-Boy60 CID 4 Cylinder Gas
Standard Bore 2-5/8"
Engine Serial Number: to 261717
• Flat Head Piston
• Using Connecting Rod 251246R13
• Rod Bearing Length .761"
1ENGINES
Replacement parts to fit
I.H.C.
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
To engine s/n 261717 using connecting rod# 251246R13. Rod bearing length .761"
Rod bearing kit, standardCRK60
Rod bearing kit, .002"CRK60-002
Rod bearing kit, .010"CRK60-010
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standardMBK60
Main bearing kit, .010"MBK60-010
IH-1-2www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: Cub, Cub Lo-Boy60 CID 4 Cylinder Gas
Standard Bore 2-5/8"
Engine Serial Number: to 261717
• Flat Head Piston
• Using Connecting Rod 251246R13
• Rod Bearing Length .761"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1150-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1150-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1150
Sleeve and Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Flat Head Piston
Sleeve & piston kit. Contains sleeves, sleeve
seals, pistons, rings, pins & retainers.
PK150
Piston ring set, for 3-1/8" overbore. 2 @ 3/32",
1 @ 3/16" (1 used per engine)
PRS154
Piston ring set*, for 3-1/8" overbore. 3 @ 1/8",
1 @ 1/4" (1 used per engine)
*PRS150 used in prior version of PK150; PRS150
still available
PRS150
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)64508D
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
& sleeves, where required)
GK7732S
Gasket set, head. Replaces VGK7732S354474R95
Gasket, oil pan43458DB
Crankshaft SealsREPLACES
472439 Seal, crankshaft front. Replaces
49177D & 43442D.
IH-1-3www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: A, AV, B, BN, Super A, Super AV (to s/n255417)
113 CID 4 Cylinder Gas
3-1/8" Overbore Supplied, Standard Bore 3"
• Flat Head Standard Compression Piston
• Cylinder Sleeve 3-5/16" O.D. at Seal
• Valve Length 4-25/32"
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve length 4-25/32" (4.781")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, retainers.
VOKH113
Valve, engine intake (4 used per engine)42024D
Valve, engine exhaust (4 used per engine)42025DA
Spring, engine valve (8 used per engine, without
rotocaps)
24544DA
Guide, engine valve (8 used per engine)356583R21
Valve key (16 used per engine)42026D
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-356304R11)CRK113
Rod bearing kit, .002" (replaces 4-356306R11)CRK113-002
Rod bearing kit, .010" (replaces 4-376636R11)CRK113-010
Rod bearing kit, .020" (replaces 4-376638R11)CRK113-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-360216R11 & 1-360221R11)
MBK113
Main bearing kit, .002" (replaces 2-360218R11
& 1-360223R11)
MBK113-002
Main bearing kit, .010" (replaces 2-376640R11
& 1-376641R11)
MBK113-010
Main bearing kit, .020" (replaces 2-376643R11
& 1-376644R11)
MBK113-020
IH-1-4www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: A, AV, B, BN, Super A, Super AV (to s/n255417)
113 CID 4 Cylinder Gas
3-1/8" Overbore Supplied, Standard Bore 3"
• Flat Head Standard Compression Piston
• Cylinder Sleeve 3-5/16" O.D. at Seal
• Valve Length 4-25/32"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1150-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1150A-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1150
Sleeve and Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Flat Head Piston
Sleeve & piston kit. Contains sleeves, sleeve
seals, pistons, rings, pins & retainers.
PK150
Piston ring set, for 3-1/8" overbore. 2 @ 3/32",
1 @ 3/16" (1 used per engine)
PRS154
Piston ring set*, for 3-1/8" overbore. 3 @ 1/8",
1 @ 1/4" (1 used per engine)
*PRS150 used in prior version of PK150; PRS150
still available
PRS150
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)64508D
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
& sleeves, where required)
GK7732S
Gasket set, head. Replaces VGK7732S354474R95
Gasket, oil pan43458DB
Crankshaft SealsREPLACES
472439 Seal, crankshaft front. Replaces
49177D & 43442D.
IH-1-5www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: Super A, Super AV (s/n 255418 to s/n310299), C
113 CID 4 Cylinder Gas
3-1/8" Overbore Supplied, Standard Bore 3"
• Flat Head Standard Compression Piston
• Cylinder Sleeve 3-5/16" O.D. at Seal
• Valve Length 4-57/64"
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve length 4-57/64" (4.890")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH123
Valve, engine intake (4 used per engine)57797D
Valve, engine exhaust (4 used per engine)57798D
Spring, engine valve (8 used per engine, without
rotocaps)
24544DA
Guide, engine valve (8 used per engine)356583R21
Valve key (16 used per engine)42026D
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-356304R11)CRK113
Rod bearing kit, .002" (replaces 4-356306R11)CRK113-002
Rod bearing kit, .010" (replaces 4-376636R11)CRK113-010
Rod bearing kit, .020" (replaces 4-376638R11)CRK113-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-360216R11 & 1-360221R11)
MBK113
Main bearing kit, .002" (replaces 2-360218R11
& 1-360223R11)
MBK113-002
Main bearing kit, .010" (replaces 2-376640R11
& 1-376641R11)
MBK113-010
Main bearing kit, .020" (replaces 2-376643R11
& 1-376644R11)
MBK113-020
IH-1-6www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: Super A, Super AV (s/n 255418 to s/n310299), C
113 CID 4 Cylinder Gas
3-1/8" Overbore Supplied, Standard Bore 3"
• Flat Head Standard Compression Piston
• Cylinder Sleeve 3-5/16" O.D. at Seal
• Valve Length 4-57/64"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1154-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1154-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1154
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit, overbore 3-1/8". Contains
sleeves, sleeve seals, pistons, rings, pins &
retainers.
PK154
Piston ring set, for 3-1/8" overbore. 2 @ 3/32",
1 @ 3/16" (1 used per engine)
PRS154
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)64508D
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
& sleeves, where required)
GK7732S
Gasket set, head. Replaces VGK7732S354474R95
Gasket, oil pan43458DB
Crankshaft SealsREPLACES
472439 Seal, crankshaft front. Replaces
49177D & 43442D.
IH-1-7www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: A, AV, B, BN, Super A, Super AV (to s/n255417)
113 CID 4 Cylinder Gas
3-1/8" Overbore Supplied, Standard Bore 3"
• Stepped Head High Compression Piston
• Cylinder Sleeve 3-5/16" O.D. at Seal
• Valve Length 4-25/32"
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve length 4-25/32" (4.781")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, retainers.
VOKH113
Valve, engine intake (4 used per engine)42024D
Valve, engine exhaust (4 used per engine)42025DA
Spring, engine valve (8 used per engine, without
rotocaps)
24544DA
Guide, engine valve (8 used per engine)356583R21
Valve key (16 used per engine)42026D
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-356304R11)CRK113
Rod bearing kit, .002" (replaces 4-356306R11)CRK113-002
Rod bearing kit, .010" (replaces 4-376636R11)CRK113-010
Rod bearing kit, .020" (replaces 4-376638R11)CRK113-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-360216R11 & 1-360221R11)
MBK113
Main bearing kit, .002" (replaces 2-360218R11
& 1-360223R11)
MBK113-002
Main bearing kit, .010" (replaces 2-376640R11
& 1-376641R11)
MBK113-010
Main bearing kit, .020" (replaces 2-376643R11
& 1-376644R11)
MBK113-020
IH-1-8www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: A, AV, B, BN, Super A, Super AV (to s/n255417)
113 CID 4 Cylinder Gas
3-1/8" Overbore Supplied, Standard Bore 3"
• Stepped Head High Compression Piston
• Cylinder Sleeve 3-5/16" O.D. at Seal
• Valve Length 4-25/32"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1154-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1154B-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1154
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit, overbore 3-1/8". Contains
sleeves, sleeve seals, pistons, rings, pins &
retainers.
PK154
Piston ring set, for 3-1/8" overbore. 2 @ 3/32",
1 @ 3/16" (1 used per engine)
PRS154
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)64508D
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
& sleeves, where required)
GK7732S
Gasket set, head. Replaces VGK7732S354474R95
Gasket, oil pan43458DB
Crankshaft SealsREPLACES
472439 Seal, crankshaft front. Replaces
49177D & 43442D.
IH-1-9www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: C, Super A, Super AV (s/n 255418 to s/n310299)
113 CID 4 Cylinder Gas
3-1/8" Overbore Supplied, Standard Bore 3"
• Stepped Head High Compression Piston
• Cylinder Sleeve 3-5/16" O.D. at Seal
• Valve Length 4-57/64"
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve length 4-57/64" (4.890")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH123
Valve, engine intake (4 used per engine)57797D
Valve, engine exhaust (4 used per engine)57798D
Spring, engine valve (8 used per engine, without
rotocaps)
24544DA
Guide, engine valve (8 used per engine)356583R21
Valve key (16 used per engine)42026D
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-356304R11)CRK113
Rod bearing kit, .002" (replaces 4-356306R11)CRK113-002
Rod bearing kit, .010" (replaces 4-376636R11)CRK113-010
Rod bearing kit, .020" (replaces 4-376638R11)CRK113-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-360216R11 & 1-360221R11)
MBK113
Main bearing kit, .002" (replaces 2-360218R11
& 1-360223R11)
MBK113-002
Main bearing kit, .010" (replaces 2-376640R11
& 1-376641R11)
MBK113-010
Main bearing kit, .020" (replaces 2-376643R11
& 1-376644R11)
MBK113-020
IH-1-10www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: C, Super A, Super AV (s/n 255418 to s/n310299)
113 CID 4 Cylinder Gas
3-1/8" Overbore Supplied, Standard Bore 3"
• Stepped Head High Compression Piston
• Cylinder Sleeve 3-5/16" O.D. at Seal
• Valve Length 4-57/64"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1159-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1159-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1159
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit, Overbore 3-1/4". Contains
sleeves, sleeve seals, pistons, rings, pins &
retainers.
PK159
Piston ring set, for 3-1/4" overbore. 3 @ 3/32" &
1 @ 3/16" (1 used per engine)
PRS159
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)64508D
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
& sleeves, where required)
GK7640S
Gasket set, head. Replaces VGK7640S357476R95
Gasket, oil pan43458DB
Front seal package, contains seal & wear sleeve378193R91
Valves & Valve PartsREPLACES
Valve length 4-57/64" (4.890")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH123
Valve, engine intake (4 used per engine)57797D
Valve, engine exhaust (4 used per engine)57798D
Spring, engine valve (8 used per engine, without
rotocaps)
24544DA
Guide, engine valve (8 used per engine)356583R21
Valve key (16 used per engine)42026D
IH-1-11www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 100, 200, Super A-1, Super AV1 (s/n310300 & up), Super C
123 CID 4 Cylinder Gas
3-1/4" Overbore Supplied, Standard Bore 3-1/8"
• Stepped Head Piston
• Cylinder Sleeve 3-7/16" O.D. at Seal, Sleeve Length 7-1/16"
• Valve Length 4-57/64"
1ENGINES
Replacement parts to fit
I.H.C.
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-356304R11)CRK113
Rod bearing kit, .002" (replaces 4-356306R11)CRK113-002
Rod bearing kit, .010" (replaces 4-376636R11)CRK113-010
Rod bearing kit, .020" (replaces 4-376638R11)CRK113-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-360216R11 & 1-360221R11)
MBK113
Main bearing kit, .002" (replaces 2-360218R11
& 1-360223R11)
MBK113-002
Main bearing kit, .010" (replaces 2-376640R11
& 1-376641R11)
MBK113-010
Main bearing kit, .020" (replaces 2-376643R11
& 1-376644R11)
MBK113-020
IH-1-12www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 100, 200, Super A-1, Super AV1 (s/n310300 & up), Super C
123 CID 4 Cylinder Gas
3-1/4" Overbore Supplied, Standard Bore 3-1/8"
• Stepped Head Piston
• Cylinder Sleeve 3-7/16" O.D. at Seal, Sleeve Length 7-1/16"
• Valve Length 4-57/64"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1150C-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1150C-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, head gasket set, and oil pan gasket
kit.
BIFH1150C
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Flat Head Piston
Sleeve & piston kit. Contains sleeves, sleeve
seals, pistons, rings, pins & retainers.
PK150
Piston ring set*, for 3-1/8" overbore. 3 @ 1/8",
1 @ 1/4" (1 used per engine)
*PRS150 used in prior version of PK150; PRS150
still available
PRS150
Piston Pin BushingsREPLACES
64508D Bushing, piston pin (4 used per
engine)
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
& sleeves, where required)
GK7640S
Gasket set, head. Replaces VGK7640S357476R95
Gasket, oil pan43458DB
Front seal package, contains seal & wear sleeve378193R91
Valves & Valve PartsREPLACES
Valve length 5-15/64" (5.234")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH135
Valve, engine intake (4 used per engine)366302R2
Valve, engine exhaust (4 used per engine)366303R4
Spring, engine valve (without rotorcaps, 8 used
per engine)
406723R1
Guide, engine valve (8 used per engine)356583R21
Valve key (16 used per engine)42026D
IH-1-13www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 130, 140, 230, 240123 CID 4 Cylinder Gas
Standard Bore 3-1/8"
• Flat Head Piston
• Cylinder Sleeve 3-5/16" O.D. at Seal, Sleeve Length 6-7/8"
• Valve Length 5-15/64"
1ENGINES
Replacement parts to fit
I.H.C.
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-356304R11)CRK113
Rod bearing kit, .002" (replaces 4-356306R11)CRK113-002
Rod bearing kit, .010" (replaces 4-376636R11)CRK113-010
Rod bearing kit, .020" (replaces 4-376638R11)CRK113-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-360216R11 & 1-360221R11)
MBK113
Main bearing kit, .002" (replaces 2-360218R11
& 1-360223R11)
MBK113-002
Main bearing kit, .010" (replaces 2-376640R11
& 1-376641R11)
MBK113-010
Main bearing kit, .020" (replaces 2-376643R11
& 1-376644R11)
MBK113-020
IH-1-14www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 130, 140, 230, 240123 CID 4 Cylinder Gas
Standard Bore 3-1/8"
• Flat Head Piston
• Cylinder Sleeve 3-5/16" O.D. at Seal, Sleeve Length 6-7/8"
• Valve Length 5-15/64"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1165-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1165-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1165
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, sleeve
seals, pistons, rings, pins & retainers.
PK165
Piston ring set, for 3-1/4" standard bore. 2 @
3/32", 1 @ 3/16" (1 used per engine)
PRS165
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)367775R1
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
& sleeves, where required)
GK7640S
Gasket set, head. Replaces VGK7640S357476R95
Gasket, oil pan43458DB
Front seal package, contains seal & wear sleeve378193R91
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH135
Valve, engine intake (4 used per engine)366302R2
Valve, engine exhaust (4 used per engine)366303R4
Spring, engine valve (without rotorcaps, 8 used
per engine)
406723R1
Guide, engine valve (8 used per engine)356583R21
Valve key (16 used per engine)42026D
IH-1-15www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 330, 340135 CID 4 Cylinder Gas
Standard Bore 3-1/4"
Engine Serial Number: to 100500
• Stepped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-367777R11)CRK135
Rod bearing kit, .010" (replaces 4-376646R11)CRK135-010
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-367749R11 & 1-367750R11)
MBK135
Main bearing kit, .010" (replaces 2-376650R11
& 1-376651R11)
MBK135-010
IH-1-16www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 330, 340135 CID 4 Cylinder Gas
Standard Bore 3-1/4"
Engine Serial Number: to 100500
• Stepped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons rings,
pins, pin bushings, and overhaul gasket set with
crankshaft seals.
BEKH1152A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, complete gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1152-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1152A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Flat Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. Overbore to 3-7/16".
PK152
Piston ring set, 3-7/16" overbore. 3 @ 3/32", 1 @
3/16" (1 used per engine)
PRS152
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)25998H
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals & sleeves, where required)
GK7509S
Gasket set, headVGK7509S
Gasket, oil pan45267DA
Valves & Valve PartsREPLACES
Valve length 5-1/16" (5.0625")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH152A
Valve, engine intake (4 used per engine)57696D
Valve, engine exhaust (4 used per engine)57697D
Spring, engine valve (8 used per engine, without
rotocaps)
24544DA
Guide, engine valve (8 used per engine)6169DR
Valve key (16 used per engine)42026D
IH-1-17www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: H, HV (to s/n 391357), O4, OS4, W4 (tos/n 33339)
152 CID 4 Cylinder Distillate
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Flat Head Piston
• Valve Length 5-1/16"
• Early Crank
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (3 bearings)CBK-H152
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-43788DBX)CRK152
Rod bearing kit, .002" (replaces 4-355268R11)CRK152-002
Rod bearing kit, .010" (replaces 4-377962R11)CRK152-010
Rod bearing kit, .020" (replaces 4-377964R11)CRK152-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces 2-43707DAX
& 1-43708DAX)
MBK152
Main bearing kit, .010" (replaces 2-377967R11
& 1-377968R11)
MBK152-010
Main bearing kit, .020" (replaces 2-377970R11
& 1-377971R11)
MBK152-020
IH-1-18www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: H, HV (to s/n 391357), O4, OS4, W4 (tos/n 33339)
152 CID 4 Cylinder Distillate
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Flat Head Piston
• Valve Length 5-1/16"
• Early Crank
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1152E-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1152B-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1152A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Flat Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. Overbore to 3-7/16".
PK152
Piston ring set, 3-7/16" overbore. 3 @ 3/32", 1 @
3/16" (1 used per engine)
PRS152
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)25998H
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals & sleeves, where required)
GK7509S
Gasket set, headVGK7509S
Gasket, oil pan45267DA
Valves & Valve PartsREPLACES
Valve length 5-1/16" (5.0625")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH152A
Valve, engine intake (4 used per engine)57696D
Valve, engine exhaust (4 used per engine)57697D
Spring, engine valve (8 used per engine, without
rotocaps)
24544DA
Guide, engine valve (8 used per engine)6169DR
Valve key (16 used per engine)42026D
IH-1-19www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: H, HV (s/n 391358 & up), O4, OS4, W4(s/n 33340 & up)
152 CID 4 Cylinder Distillate
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Flat Head Piston
• Valve Length 5-1/16"
• Late Crank
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (3 bearings)CBK-H152
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-357990R11)CRK164
Rod bearing kit, .010" (replaces 4-376696R11)CRK164-010
Rod bearing kit, .020" (replaces 4-376698R11)CRK164-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-357994R11 & 1-357998R11)
MBK164
Main bearing kit, .010" (replaces 2-376700R11
& 1-376701R11)
MBK164-010
Main bearing kit, .020" (replaces 2-376703R11
& 1-376704R11)
MBK164-020
IH-1-20www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: H, HV (s/n 391358 & up), O4, OS4, W4(s/n 33340 & up)
152 CID 4 Cylinder Distillate
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Flat Head Piston
• Valve Length 5-1/16"
• Late Crank
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons rings,
pins, pin bushings, and overhaul gasket set with
crankshaft seals.
BEKH1152A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1152A-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1152A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Flat Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. Overbore to 3-7/16".
PK152
Piston ring set, 3-7/16" overbore. 3 @ 3/32", 1 @
3/16" (1 used per engine)
PRS152
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)25998H
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals & sleeves, where required)
GK7509S
Gasket set, headVGK7509S
Gasket, oil pan45267DA
Valves & Valve PartsREPLACES
Valve length 5-5/16" (5.312")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH152B
Valve, engine intake (4 used per engine)50706DA
Valve, engine exhaust (4 used per engine)50707DA
Spring, engine valve (8 used per engine, without
rotocaps)
24544DA
Guide, engine valve (8 used per engine)8049DR
Valve key (16 used per engine)42026D
IH-1-21www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: H, HV (to s/n 106907), O4, OS4, W4 (tos/n 33339)
152 CID 4 Cylinder Gas
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Flat Head Standard Compression Piston
• Valve Length 5-5/16"
• Early Crank
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (3 bearings)CBK-H152
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-43788DBX)CRK152
Rod bearing kit, .002" (replaces 4-355268R11)CRK152-002
Rod bearing kit, .010" (replaces 4-377962R11)CRK152-010
Rod bearing kit, .020" (replaces 4-377964R11)CRK152-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces 2-43707DAX
& 1-43708DAX)
MBK152
Main bearing kit, .010" (replaces 2-377967R11
& 1-377968R11)
MBK152-010
Main bearing kit, .020" (replaces 2-377970R11
& 1-377971R11)
MBK152-020
IH-1-22www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: H, HV (to s/n 106907), O4, OS4, W4 (tos/n 33339)
152 CID 4 Cylinder Gas
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Flat Head Standard Compression Piston
• Valve Length 5-5/16"
• Early Crank
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons rings,
pins, pin bushings, and overhaul gasket set with
crankshaft seals.
BEKH1152A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1152C-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1152A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Flat Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. Overbore to 3-7/16".
PK152
Piston ring set, 3-7/16" overbore. 3 @ 3/32", 1 @
3/16" (1 used per engine)
PRS152
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)25998H
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals & sleeves, where required)
GK7509S
Gasket set, headVGK7509S
Gasket, oil pan45267DA
Valves & Valve PartsREPLACES
Valve length 5-15/32" (5.469")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH152C
Valve, engine intake (4 used per engine)362534R1
Valve, engine exhaust (4 used per engine)362535R1
Spring, engine valve (without rotocaps, 8 used
per engine)
358197R1
Guide, engine valve (8 used per engine)8049DR
Valve key (16 used per engine)42026D
IH-1-23www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: H, HV (s/n 106908 to s/n 391357)152 CID 4 Cylinder Gas
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Flat Head Standard Compression Piston
• Valve Length 5-15/32"
• Early Crank
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (3 bearings)CBK-H152
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-43788DBX)CRK152
Rod bearing kit, .002" (replaces 4-355268R11)CRK152-002
Rod bearing kit, .010" (replaces 4-377962R11)CRK152-010
Rod bearing kit, .020" (replaces 4-377964R11)CRK152-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces 2-43707DAX
& 1-43708DAX)
MBK152
Main bearing kit, .010" (replaces 2-377967R11
& 1-377968R11)
MBK152-010
Main bearing kit, .020" (replaces 2-377970R11
& 1-377971R11)
MBK152-020
IH-1-24www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: H, HV (s/n 106908 to s/n 391357)152 CID 4 Cylinder Gas
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Flat Head Standard Compression Piston
• Valve Length 5-15/32"
• Early Crank
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1152E-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1152E-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1152A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Flat Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. Overbore to 3-7/16".
PK152
Piston ring set, 3-7/16" overbore. 3 @ 3/32", 1 @
3/16" (1 used per engine)
PRS152
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)25998H
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals & sleeves, where required)
GK7509S
Gasket set, headVGK7509S
Gasket, oil pan45267DA
Valves & Valve PartsREPLACES
Valve length 5-15/32" (5.469")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH152C
Valve, engine intake (4 used per engine)362534R1
Valve, engine exhaust (4 used per engine)362535R1
Spring, engine valve (without rotocaps, 8 used
per engine)
358197R1
Guide, engine valve (8 used per engine)8049DR
Valve key (16 used per engine)42026D
IH-1-25www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: H, HV (s/n 391358 & up)152 CID 4 Cylinder Gas
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Flat Head Standard Compression Piston
• Valve Length 5-15/32"
• Late Crank
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (3 bearings)CBK-H152
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-357990R11)CRK164
Rod bearing kit, .010" (replaces 4-376696R11)CRK164-010
Rod bearing kit, .020" (replaces 4-376698R11)CRK164-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-357994R11 & 1-357998R11)
MBK164
Main bearing kit, .010" (replaces 2-376700R11
& 1-376701R11)
MBK164-010
Main bearing kit, .020" (replaces 2-376703R11
& 1-376704R11)
MBK164-020
IH-1-26www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: H, HV (s/n 391358 & up)152 CID 4 Cylinder Gas
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Flat Head Standard Compression Piston
• Valve Length 5-15/32"
• Late Crank
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1152E-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1152F-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1152A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Flat Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. Overbore to 3-7/16".
PK152
Piston ring set, 3-7/16" overbore. 3 @ 3/32", 1 @
3/16" (1 used per engine)
PRS152
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)25998H
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals & sleeves, where required)
GK7509S
Gasket set, headVGK7509S
Gasket, oil pan45267DA
Valves & Valve PartsREPLACES
Valve length 5-5/16" (5.312")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH152B
Valve, engine intake (4 used per engine)50706DA
Valve, engine exhaust (4 used per engine)50707DA
Spring, engine valve (8 used per engine, without
rotocaps)
24544DA
Guide, engine valve (8 used per engine)8049DR
Valve key (16 used per engine)42026D
IH-1-27www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: O4, OS4, W4 (s/n 33340 & up)152 CID 4 Cylinder Gas
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Flat Head Standard Compression Piston
• Valve Length 5-5/16"
• Late Crank
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (3 bearings)CBK-H152
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-357990R11)CRK164
Rod bearing kit, .010" (replaces 4-376696R11)CRK164-010
Rod bearing kit, .020" (replaces 4-376698R11)CRK164-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-357994R11 & 1-357998R11)
MBK164
Main bearing kit, .010" (replaces 2-376700R11
& 1-376701R11)
MBK164-010
Main bearing kit, .020" (replaces 2-376703R11
& 1-376704R11)
MBK164-020
IH-1-28www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: O4, OS4, W4 (s/n 33340 & up)152 CID 4 Cylinder Gas
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Flat Head Standard Compression Piston
• Valve Length 5-5/16"
• Late Crank
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1156A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1156A-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1156A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. Overbore
to 3-7/16".
PK156
Piston ring set, 3-7/16" overbore. 3 @ 3/32", 1 @
3/16" (1 used per engine)
PRS156
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)25998H
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals & sleeves, where required)
GK7509S
Gasket set, headVGK7509S
Gasket, oil pan45267DA
Valves & Valve PartsREPLACES
Valve length 5-5/16" (5.312")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH152B
Valve, engine intake (4 used per engine)50706DA
Valve, engine exhaust (4 used per engine)50707DA
Spring, engine valve (8 used per engine, without
rotocaps)
24544DA
Guide, engine valve (8 used per engine)8049DR
Valve key (16 used per engine)42026D
IH-1-29www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: H, HV (to s/n 106907), O4, OS4, W4 (tos/n 33339)
152 CID 4 Cylinder Gas
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Stepped Head High Compression Piston
• Valve Length 5-5/16"
• Early Crank
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (3 bearings)CBK-H152
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-43788DBX)CRK152
Rod bearing kit, .002" (replaces 4-355268R11)CRK152-002
Rod bearing kit, .010" (replaces 4-377962R11)CRK152-010
Rod bearing kit, .020" (replaces 4-377964R11)CRK152-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces 2-43707DAX
& 1-43708DAX)
MBK152
Main bearing kit, .010" (replaces 2-377967R11
& 1-377968R11)
MBK152-010
Main bearing kit, .020" (replaces 2-377970R11
& 1-377971R11)
MBK152-020
IH-1-30www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: H, HV (to s/n 106907), O4, OS4, W4 (tos/n 33339)
152 CID 4 Cylinder Gas
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Stepped Head High Compression Piston
• Valve Length 5-5/16"
• Early Crank
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1156A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1156C-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1156A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. Overbore
to 3-7/16".
PK156
Piston ring set, 3-7/16" overbore. 3 @ 3/32", 1 @
3/16" (1 used per engine)
PRS156
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)25998H
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals & sleeves, where required)
GK7509S
Gasket set, headVGK7509S
Gasket, oil pan45267DA
Valves & Valve PartsREPLACES
Valve length 5-15/32" (5.469")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH152C
Valve, engine intake (4 used per engine)362534R1
Valve, engine exhaust (4 used per engine)362535R1
Spring, engine valve (without rotocaps, 8 used
per engine)
358197R1
Guide, engine valve (8 used per engine)8049DR
Valve key (16 used per engine)42026D
IH-1-31www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: H, HV (s/n 106908 to s/n 391357)152 CID 4 Cylinder Gas
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Stepped Head High Compression Piston
• Valve Length 5-15/32"
• Early Crank
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (3 bearings)CBK-H152
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-43788DBX)CRK152
Rod bearing kit, .002" (replaces 4-355268R11)CRK152-002
Rod bearing kit, .010" (replaces 4-377962R11)CRK152-010
Rod bearing kit, .020" (replaces 4-377964R11)CRK152-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces 2-43707DAX
& 1-43708DAX)
MBK152
Main bearing kit, .010" (replaces 2-377967R11
& 1-377968R11)
MBK152-010
Main bearing kit, .020" (replaces 2-377970R11
& 1-377971R11)
MBK152-020
IH-1-32www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: H, HV (s/n 106908 to s/n 391357)152 CID 4 Cylinder Gas
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Stepped Head High Compression Piston
• Valve Length 5-15/32"
• Early Crank
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1156E-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1156E-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1156A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. Overbore
to 3-7/16".
PK156
Piston ring set, 3-7/16" overbore. 3 @ 3/32", 1 @
3/16" (1 used per engine)
PRS156
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)25998H
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals & sleeves, where required)
GK7509S
Gasket set, headVGK7509S
Gasket, oil pan45267DA
Valves & Valve PartsREPLACES
Valve length 5-15/32" (5.469")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH152C
Valve, engine intake (4 used per engine)362534R1
Valve, engine exhaust (4 used per engine)362535R1
Spring, engine valve (without rotocaps, 8 used
per engine)
358197R1
Guide, engine valve (8 used per engine)8049DR
Valve key (16 used per engine)42026D
IH-1-33www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: H, HV (s/n 391358 & up)152 CID 4 Cylinder Gas
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Stepped Head High Compression Piston
• Valve Length 5-15/32"
• Late Crank
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (3 bearings)CBK-H152
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-357990R11)CRK164
Rod bearing kit, .010" (replaces 4-376696R11)CRK164-010
Rod bearing kit, .020" (replaces 4-376698R11)CRK164-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-357994R11 & 1-357998R11)
MBK164
Main bearing kit, .010" (replaces 2-376700R11
& 1-376701R11)
MBK164-010
Main bearing kit, .020" (replaces 2-376703R11
& 1-376704R11)
MBK164-020
IH-1-34www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: H, HV (s/n 391358 & up)152 CID 4 Cylinder Gas
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Stepped Head High Compression Piston
• Valve Length 5-15/32"
• Late Crank
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1156E-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1156F-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1156A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. Overbore
to 3-7/16".
PK156
Piston ring set, 3-7/16" overbore. 3 @ 3/32", 1 @
3/16" (1 used per engine)
PRS156
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)25998H
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals & sleeves, where required)
GK7509S
Gasket set, headVGK7509S
Gasket, oil pan45267DA
Valves & Valve PartsREPLACES
Valve length 5-5/16" (5.312")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH152B
Valve, engine intake (4 used per engine)50706DA
Valve, engine exhaust (4 used per engine)50707DA
Spring, engine valve (8 used per engine, without
rotocaps)
24544DA
Guide, engine valve (8 used per engine)8049DR
Valve key (16 used per engine)42026D
IH-1-35www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: O4, OS4, W4 (s/n 33340 & up)152 CID 4 Cylinder Gas
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Stepped Head High Compression Piston
• Valve Length 5-5/16"
• Late Crank
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (3 bearings)CBK-H152
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-357990R11)CRK164
Rod bearing kit, .010" (replaces 4-376696R11)CRK164-010
Rod bearing kit, .020" (replaces 4-376698R11)CRK164-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-357994R11 & 1-357998R11)
MBK164
Main bearing kit, .010" (replaces 2-376700R11
& 1-376701R11)
MBK164-010
Main bearing kit, .020" (replaces 2-376703R11
& 1-376704R11)
MBK164-020
IH-1-36www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: O4, OS4, W4 (s/n 33340 & up)152 CID 4 Cylinder Gas
3-7/16" Overbore Supplied, Standard Bore 3-3/8"
• Stepped Head High Compression Piston
• Valve Length 5-5/16"
• Late Crank
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1161A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1161-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1161A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. Overbore
to 3-9/16".
PK161
Piston ring set, 3-9/16" overbore. 3 @ 3/32", 1 @
1/4" (1 used per engine)
PRS161
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)25998H
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals & sleeves, where required)
GK7509S
Gasket set, headVGK7509S
Gasket, oil pan45267DA
Valves & Valve PartsREPLACES
Valve length 5-1/16" (5.0625")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH164A
Valve, engine intake (4 used per engine)57696D
Valve, engine exhaust (4 used per engine)57697D
Spring, engine valve (without rotocaps, 8 used
per engine)
358197R1
Guide, engine valve (8 used per engine)6169DR
Valve key (16 used per engine)42026D
IH-1-37www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: Super H, Super HV, Super W4164 CID 4 Cylinder Distillate
3-9/16" Overbore Supplied, Standard Bore 3-1/2"
• Stepped Head Piston
• Valve Length 5-1/16"
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (3 bearings)CBK-H152
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-357990R11)CRK164
Rod bearing kit, .010" (replaces 4-376696R11)CRK164-010
Rod bearing kit, .020" (replaces 4-376698R11)CRK164-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-357994R11 & 1-357998R11)
MBK164
Main bearing kit, .010" (replaces 2-376700R11
& 1-376701R11)
MBK164-010
Main bearing kit, .020" (replaces 2-376703R11
& 1-376704R11)
MBK164-020
IH-1-38www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: Super H, Super HV, Super W4164 CID 4 Cylinder Distillate
3-9/16" Overbore Supplied, Standard Bore 3-1/2"
• Stepped Head Piston
• Valve Length 5-1/16"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1161A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1161A-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1161A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. Overbore
to 3-9/16".
PK161
Piston ring set, 3-9/16" overbore. 3 @ 3/32", 1 @
1/4" (1 used per engine)
PRS161
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)25998H
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals & sleeves, where required)
GK7509S
Gasket set, headVGK7509S
Gasket, oil pan45267DA
Valves & Valve PartsREPLACES
Valve length 5-5/16" (5.312")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH164B
Valve, engine intake (4 used per engine)50706DA
Valve, engine exhaust (4 used per engine)50707DA
Spring, engine valve (without rotocaps, 8 used
per engine)
358197R1
Guide, engine valve (8 used per engine)8049DR
Valve key (16 used per engine)42026D
IH-1-39www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: Super H, Super HV, Super W4164 CID 4 Cylinder Gas
3-9/16" Overbore Supplied, Standard Bore 3-1/2"
• Stepped Head Piston
• Valve Length 5-5/16"
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (3 bearings)CBK-H152
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-357990R11)CRK164
Rod bearing kit, .010" (replaces 4-376696R11)CRK164-010
Rod bearing kit, .020" (replaces 4-376698R11)CRK164-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-357994R11 & 1-357998R11)
MBK164
Main bearing kit, .010" (replaces 2-376700R11
& 1-376701R11)
MBK164-010
Main bearing kit, .020" (replaces 2-376703R11
& 1-376704R11)
MBK164-020
IH-1-40www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: Super H, Super HV, Super W4164 CID 4 Cylinder Gas
3-9/16" Overbore Supplied, Standard Bore 3-1/2"
• Stepped Head Piston
• Valve Length 5-5/16"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1161A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1161B-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1161A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. Overbore
to 3-9/16".
PK161
Piston ring set, 3-9/16" overbore. 3 @ 3/32", 1 @
1/4" (1 used per engine)
PRS161
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)25998H
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals & sleeves, where required)
GK7509S
Gasket set, headVGK7509S
Gasket, oil pan45267DA
Valves & Valve PartsREPLACES
Valve length 5-15/32" (5.469")
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH152C
Valve, engine intake (4 used per engine)362534R1
Valve, engine exhaust (4 used per engine)362535R1
Spring, engine valve (without rotocaps, 8 used
per engine)
358197R1
Guide, engine valve (8 used per engine)8049DR
Valve key (16 used per engine)42026D
IH-1-41www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: Super H, Super HV, Super W4164 CID 4 Cylinder Gas
3-9/16" Overbore Supplied, Standard Bore 3-1/2"
• Stepped Head Piston
• Valve Length 5-15/32"
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (3 bearings)CBK-H152
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-357990R11)CRK164
Rod bearing kit, .010" (replaces 4-376696R11)CRK164-010
Rod bearing kit, .020" (replaces 4-376698R11)CRK164-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-357994R11 & 1-357998R11)
MBK164
Main bearing kit, .010" (replaces 2-376700R11
& 1-376701R11)
MBK164-010
Main bearing kit, .020" (replaces 2-376703R11
& 1-376704R11)
MBK164-020
IH-1-42www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: Super H, Super HV, Super W4164 CID 4 Cylinder Gas
3-9/16" Overbore Supplied, Standard Bore 3-1/2"
• Stepped Head Piston
• Valve Length 5-15/32"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, and overhaul gasket set with
crankshaft seals.
BEKH1167-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1167-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1167
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
For engine with 1.109" piston pin diameter.
When ordering only the piston kit, order bushing
adapter kit.
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. Overbore
to 3-5/8".
PK167
Piston ring set, 3-5/8" overbore. 3 @ 3/32", 1 @
1/4" (1 used per engine)
PRS167
Piston Pin BushingsREPLACES
Bushing adapter kit (1 used per engine). .875"
I.D., 1.168" O.D.
366883R92
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals, where required)
GK7766S
Gasket set, headVGK7766
Gasket, oil pan45267DA
Speedi Sleeve, for front crankshaft seal.
391976R91. Drop ship
99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
IH-1-43www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 300 (to s/n 48048)169 CID 4 Cylinder Gas
3-5/8" Overbore Supplied, Standard Bore 3-9/16"
• Stepped Head Piston with 1.109" Pin Diameter
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH152C
Valve, engine intake (4 used per engine)362534R1
Valve, engine exhaust (4 used per engine)362535R1
Spring, engine valve (without rotocaps, 8 used
per engine)
358197R1
Guide, engine valve (8 used per engine)8049DR
Valve key (16 used per engine)42026D
Cam BearingsREPLACES
Camshaft bearing kit (3 bearings)CBK-H152
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-357990R11)CRK164
Rod bearing kit, .010" (replaces 4-376696R11)CRK164-010
Rod bearing kit, .020" (replaces 4-376698R11)CRK164-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-357994R11 & 1-357998R11)
MBK164
Main bearing kit, .010" (replaces 2-376700R11
& 1-376701R11)
MBK164-010
Main bearing kit, .020" (replaces 2-376703R11
& 1-376704R11)
MBK164-020
IH-1-44www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 300 (to s/n 48048)169 CID 4 Cylinder Gas
3-5/8" Overbore Supplied, Standard Bore 3-9/16"
• Stepped Head Piston with 1.109" Pin Diameter
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1167A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1167A-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1167
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
For engines with .875" piston pin diameter.
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. Overbore
to 3-5/8".
PK167
Piston ring set, 3-5/8" overbore. 3 @ 3/32", 1 @
1/4" (1 used per engine)
PRS167
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine). .875"
I.D., .935" O.D.
364913R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals, where required)
GK7766S
Gasket set, headVGK7766
Gasket, oil pan45267DA
Speedi Sleeve, for front crankshaft seal.
391976R91. Drop ship
99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
IH-1-45www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 300 (s/n 48049 & up)169 CID 4 Cylinder Gas
3-5/8" Overbore Supplied, Standard Bore 3-9/16"
• Stepped Head Piston with .875" Pin Diameter
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH152C
Valve, engine intake (4 used per engine)362534R1
Valve, engine exhaust (4 used per engine)362535R1
Spring, engine valve (without rotocaps, 8 used
per engine)
358197R1
Guide, engine valve (8 used per engine)8049DR
Valve key (16 used per engine)42026D
Cam BearingsREPLACES
Camshaft bearing kit (3 bearings)CBK-H152
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-357990R11)CRK164
Rod bearing kit, .010" (replaces 4-376696R11)CRK164-010
Rod bearing kit, .020" (replaces 4-376698R11)CRK164-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-357994R11 & 1-357998R11)
MBK164
Main bearing kit, .010" (replaces 2-376700R11
& 1-376701R11)
MBK164-010
Main bearing kit, .020" (replaces 2-376703R11
& 1-376704R11)
MBK164-020
IH-1-46www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 300 (s/n 48049 & up)169 CID 4 Cylinder Gas
3-5/8" Overbore Supplied, Standard Bore 3-9/16"
• Stepped Head Piston with .875" Pin Diameter
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1167A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1167A-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1167
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
For engines with .875" piston pin diameter.
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. Overbore
to 3-5/8".
PK167
Piston ring set, 3-5/8" overbore. 3 @ 3/32", 1 @
1/4" (1 used per engine)
PRS167
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine). .875"
I.D., .935" O.D.
364913R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals, where required)
GK7766S
Gasket set, headVGK7766
Gasket, oil pan45267DA
Speedi Sleeve, for front crankshaft seal.
391976R91. Drop ship
99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
IH-1-47www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 350175 CID 4 Cylinder Gas
3-5/8" Overbore Supplied, Standard Bore 3-9/16"
• Stepped Head Piston
• Piston pin .875" dia.
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH152C
Valve, engine intake (4 used per engine)362534R1
Valve, engine exhaust (4 used per engine)362535R1
Spring, engine valve (without rotocaps, 8 used
per engine)
358197R1
Guide, engine valve (8 used per engine)8049DR
Valve key (16 used per engine)42026D
Cam BearingsREPLACES
Camshaft bearing kit (3 bearings)CBK-H152
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-357990R11)CRK164
Rod bearing kit, .010" (replaces 4-376696R11)CRK164-010
Rod bearing kit, .020" (replaces 4-376698R11)CRK164-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-357994R11 & 1-357998R11)
MBK164
Main bearing kit, .010" (replaces 2-376700R11
& 1-376701R11)
MBK164-010
Main bearing kit, .020" (replaces 2-376703R11
& 1-376704R11)
MBK164-020
IH-1-48www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 350175 CID 4 Cylinder Gas
3-5/8" Overbore Supplied, Standard Bore 3-9/16"
• Stepped Head Piston
• Piston pin .875" dia.
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1169-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1169-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1169S-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1169
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. Standard
bore to 3-9/16".
PK169
Piston ring set, 3-9/16" standard bore. 2 @ 3/32",
1 @ 1/4" (1 used per engine)
PRS169
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine). .875"
I.D., .935" O.D.
364913R1
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
and sleeves, where required)
GK7799S
Gasket set, headVGK7799S
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
391976R91. Drop ship
99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
IH-1-49www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 460 (to s/n 35093)221 CID 6 Cylinder Gas
Standard Bore 3-9/16"
• Stepped Head Piston
• Intake Valve Head Dia. 1-21/32"
• Thrust Bearing Flange 3-3/4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
1-21/32" diameter intake valve head
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH221
Valve overhaul kit. Contains intake & stellite
exhaust valves, springs, guides, valve keys.
VOKH221S
Valve, engine intake (6 used per engine)234275R1
Valve, engine exhaust (6 used per engine)367191R2
Valve, exhaust, Stellite (6 used per engine)372699R3
Spring, intake & exhaust valve (12 used per
engine)
367192R1
Guide, intake & exhaust (12 used per engine)237248R1
Key, intake & exhaust valve (24 used per engine)41339D
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
With flanged thrust bearings. 1 kit used per engine
REPLACES
3-3/4" diameter thrust bearing flange
Main bearing kit, standard (replaces
1-367276R91, 1-367282R91, 1-367279R91 &
1-367285R91)
MBK221
Main bearing kit, .010" (replaces 1-376670R91,
1-376673R91, 1-376676R91, & 1-376679R91)
MBK221-010
Main bearing kit, .020" (replaces 1-376683R91,
1-376686R91, 1-376689R91 & 1-376692R91)
MBK221-020
IH-1-50www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 460 (to s/n 35093)221 CID 6 Cylinder Gas
Standard Bore 3-9/16"
• Stepped Head Piston
• Intake Valve Head Dia. 1-21/32"
• Thrust Bearing Flange 3-3/4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1169A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1169A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1169AS-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1169
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. Standard
bore to 3-9/16".
PK169
Piston ring set, 3-9/16" standard bore. 2 @ 3/32",
1 @ 1/4" (1 used per engine)
PRS169
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine). .875"
I.D., .935" O.D.
364913R1
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
and sleeves, where required)
GK7799S
Gasket set, headVGK7799S
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
391976R91. Drop ship
99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
IH-1-51www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 460 (s/n 35094 & up)221 CID 6 Cylinder Gas
Standard Bore 3-9/16"
• Stepped Head Piston
• Intake Valve Head Dia. 1-21/32"
• Thrust Bearing Flange 4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
1-21/32" diameter intake valve head
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH221
Valve overhaul kit. Contains intake & stellite
exhaust valves, springs, guides, valve keys.
VOKH221S
Valve, engine intake (6 used per engine)234275R1
Valve, engine exhaust (6 used per engine)367191R2
Valve, exhaust, Stellite (6 used per engine)372699R3
Spring, intake & exhaust valve (12 used per
engine)
367192R1
Guide, intake & exhaust (12 used per engine)237248R1
Key, intake & exhaust valve (24 used per engine)41339D
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
With flanged thrust bearings. 1 kit used per engine
REPLACES
4" diameter thrust bearing flange
Main bearing kit, standard (replaces
1-367276R91, 1-367278R91, 1-376279R91, &
1-376285R91)
MBK221A
Main bearing kit, .010" (replaces 1-376670R91,
1-332276R91, 1-376673R91, & 1-376679R91)
MBK221A-010
Main bearing kit, .020" (replaces 1-376683R91,
1-332279R91, 1-376686R91 & 1-376692R91)
MBK221A-020
IH-1-52www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 460 (s/n 35094 & up)221 CID 6 Cylinder Gas
Standard Bore 3-9/16"
• Stepped Head Piston
• Intake Valve Head Dia. 1-21/32"
• Thrust Bearing Flange 4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine). .875"
I.D., .935" O.D.
364913R1
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
and sleeves, where required)
GK7799S
Gasket set, headVGK7799S
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
391976R91. Drop ship
99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
Valves & Valve PartsREPLACES
1-21/32" diameter intake valve head
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH221
Valve overhaul kit. Contains intake & stellite
exhaust valves, springs, guides, valve keys.
VOKH221S
Valve, engine intake (6 used per engine)234275R1
Valve, engine exhaust (6 used per engine)367191R2
Valve, exhaust, Stellite (6 used per engine)372699R3
Spring, intake & exhaust valve (12 used per
engine)
367192R1
Guide, intake & exhaust (12 used per engine)237248R1
Key, intake & exhaust valve (24 used per engine)41339D
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
IH-1-53www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2606Tractor: 606 (to s/n 35093)221 CID 6 Cylinder Gas
Standard Bore 3-9/16"
• Contour Step Head Piston
• Intake Valve Head Dia. 1-21/32"
• Thrust Bearing Flange 3-3/4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
With flanged thrust bearings. 1 kit used per engine
REPLACES
3-3/4" diameter thrust bearing flange
Main bearing kit, standard (replaces
1-367276R91, 1-367282R91, 1-367279R91 &
1-367285R91)
MBK221
Main bearing kit, .010" (replaces 1-376670R91,
1-376673R91, 1-376676R91, & 1-376679R91)
MBK221-010
Main bearing kit, .020" (replaces 1-376683R91,
1-376686R91, 1-376689R91 & 1-376692R91)
MBK221-020
Oil Pump AssemblyREPLACES
Engine oil pump & screen assembly. Tractors:
560 (engine s/n 42218 & up), 660 (engine s/n
42218 & up), 706 (to engine s/n 51721), 2706
(to engine s/n 51721).
379138R91
IH-1-54www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2606Tractor: 606 (to s/n 35093)221 CID 6 Cylinder Gas
Standard Bore 3-9/16"
• Contour Step Head Piston
• Intake Valve Head Dia. 1-21/32"
• Thrust Bearing Flange 3-3/4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine). .875"
I.D., .935" O.D.
364913R1
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
and sleeves, where required)
GK7799S
Gasket set, headVGK7799S
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
391976R91. Drop ship
99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
Valves & Valve PartsREPLACES
1-21/32" diameter intake valve head
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH221
Valve overhaul kit. Contains intake & stellite
exhaust valves, springs, guides, valve keys.
VOKH221S
Valve, engine intake (6 used per engine)234275R1
Valve, engine exhaust (6 used per engine)367191R2
Valve, exhaust, Stellite (6 used per engine)372699R3
Spring, intake & exhaust valve (12 used per
engine)
367192R1
Guide, intake & exhaust (12 used per engine)237248R1
Key, intake & exhaust valve (24 used per engine)41339D
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
IH-1-55www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2606Tractor: 606 (s/n 35094 & up)221 CID 6 Cylinder Gas
Standard Bore 3-9/16"
• Contour Step Head Piston
• Intake Valve Head Dia. 1-21/32"
• Thrust Bearing Flange 4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
With flanged thrust bearings. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
1-367276R91, 1-367278R91, 1-376279R91, &
1-376285R91)
MBK221A
Main bearing kit, .010" (replaces 1-376670R91,
1-332276R91, 1-376673R91, & 1-376679R91)
MBK221A-010
Main bearing kit, .020" (replaces 1-376683R91,
1-332279R91, 1-376686R91 & 1-376692R91)
MBK221A-020
Oil Pump AssemblyREPLACES
Engine oil pump & screen assembly. Tractors:
560 (engine s/n 42218 & up), 660 (engine s/n
42218 & up), 706 (to engine s/n 51721), 2706
(to engine s/n 51721).
379138R91
IH-1-56www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2606Tractor: 606 (s/n 35094 & up)221 CID 6 Cylinder Gas
Standard Bore 3-9/16"
• Contour Step Head Piston
• Intake Valve Head Dia. 1-21/32"
• Thrust Bearing Flange 4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1151A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1151-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1151A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Flat Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. Overbore to 4".
PK151
Piston ring set, 4" overbore. 3 @ 3/32", 1 @ 1/4"
(1 used per engine)
PRS151
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)45748DAR
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK7510S
Gasket set, headVGK7510S
Gasket, oil pan46109DA
Valves & Valve PartsREPLACES
5.56" valve length
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH248
Valve, engine intake (4 used per engine)57698D
Valve, engine exhaust (4 used per engine)57699D
Spring, intake & exhaust valve (8 used per
engine)
356951R1
Guide, intake & exhaust valve (8 used per
engine)
6338DR
Key, intake & exhaust valves (16 used per
engine)
41339D
IH-1-57www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: M, MV (to s/n 278049), O6, OS6, W6 (tos/n 35463)
248 CID 4 Cylinder Distillate
4" Overbore Supplied, Standard Bore 3-7/8"
• Flat Head Piston
• Valve Length 5.56"
• Early Crank
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Bearing kit, camshaft (3 bearings)CBK-H248
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-45745DBX)CRK248
Rod bearing kit, .010" (replaces 4-377974R11)CRK248-010
Rod bearing kit, .020" (replaces 4-377976R11)CRK248-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces 2-45628DAX
& 1-45630DAX)
MBK248
Main bearing kit, .010" (replaces 2-377979R11
& 1-377980R11)
MBK248-010
Main bearing kit, .020" (replaces 2-377982R11
& 1-377983R11)
MBK248-020
IH-1-58www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: M, MV (to s/n 278049), O6, OS6, W6 (tos/n 35463)
248 CID 4 Cylinder Distillate
4" Overbore Supplied, Standard Bore 3-7/8"
• Flat Head Piston
• Valve Length 5.56"
• Early Crank
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1151C-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1151B-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1151A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Flat Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. Overbore to 4".
PK151
Piston ring set, 4" overbore. 3 @ 3/32", 1 @ 1/4"
(1 used per engine)
PRS151
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)45748DAR
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK7510S
Gasket set, headVGK7510S
Gasket, oil pan46109DA
Valves & Valve PartsREPLACES
5.56" valve length
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH248
Valve, engine intake (4 used per engine)57698D
Valve, engine exhaust (4 used per engine)57699D
Spring, intake & exhaust valve (8 used per
engine)
356951R1
Guide, intake & exhaust valve (8 used per
engine)
6338DR
Key, intake & exhaust valves (16 used per
engine)
41339D
IH-1-59www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: M, MV (s/n 278050 & up), O6, OS6, W6(s/n 35464 & up)
248 CID 4 Cylinder Distillate
4" Overbore Supplied, Standard Bore 3-7/8"
• Flat Head Piston
• Valve Length 5.56"
• Late Crank
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Bearing kit, camshaft (3 bearings)CBK-H248
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-356957R11)CRK264
Rod bearing kit, .010" (replaces 4-376716R11)CRK264-010
Rod bearing kit, .020" (replaces 4-376718R11)CRK264-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-356985R11 & 1-356986R11)
MBK264
Main bearing kit, .010" (replaces 2-376720R11
& 1-376721R11)
MBK264-010
Main bearing kit, .020" (replaces 2-376723R11
& 1-376724R11)
MBK264-020
IH-1-60www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: M, MV (s/n 278050 & up), O6, OS6, W6(s/n 35464 & up)
248 CID 4 Cylinder Distillate
4" Overbore Supplied, Standard Bore 3-7/8"
• Flat Head Piston
• Valve Length 5.56"
• Late Crank
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1151A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1151A-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1151A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Flat Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. Overbore to 4".
PK151
Piston ring set, 4" overbore. 3 @ 3/32", 1 @ 1/4"
(1 used per engine)
PRS151
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)45748DAR
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK7510S
Gasket set, headVGK7510S
Gasket, oil pan46109DA
Valves & Valve PartsREPLACES
5.875" valve length
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH264
Valve, engine intake (4 used per engine)50731DA
Valve, engine exhaust (4 used per engine)50732DA
Spring, intake & exhaust valve (8 used per
engine)
356951R1
Guide, intake & exhaust valve (8 used per
engine)
8044DR
Key, intake & exhaust valves (16 used per
engine)
41339D
IH-1-61www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: M, MV (to s/n 278049), O6, W6 (to s/n35463)
248 CID 4 Cylinder Gas
4" Overbore Supplied, Standard Bore 3-7/8"
• Flat Head Standard Compression Piston
• Valve Length 5.875"
• Early Crank
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Bearing kit, camshaft (3 bearings)CBK-H248
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-45745DBX)CRK248
Rod bearing kit, .010" (replaces 4-377974R11)CRK248-010
Rod bearing kit, .020" (replaces 4-377976R11)CRK248-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces 2-45628DAX
& 1-45630DAX)
MBK248
Main bearing kit, .010" (replaces 2-377979R11
& 1-377980R11)
MBK248-010
Main bearing kit, .020" (replaces 2-377982R11
& 1-377983R11)
MBK248-020
IH-1-62www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: M, MV (to s/n 278049), O6, W6 (to s/n35463)
248 CID 4 Cylinder Gas
4" Overbore Supplied, Standard Bore 3-7/8"
• Flat Head Standard Compression Piston
• Valve Length 5.875"
• Early Crank
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1151C-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1151C-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1151A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Flat Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. Overbore to 4".
PK151
Piston ring set, 4" overbore. 3 @ 3/32", 1 @ 1/4"
(1 used per engine)
PRS151
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)45748DAR
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK7510S
Gasket set, headVGK7510S
Gasket, oil pan46109DA
Valves & Valve PartsREPLACES
5.875" valve length
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH264
Valve, engine intake (4 used per engine)50731DA
Valve, engine exhaust (4 used per engine)50732DA
Spring, intake & exhaust valve (8 used per
engine)
356951R1
Guide, intake & exhaust valve (8 used per
engine)
8044DR
Key, intake & exhaust valves (16 used per
engine)
41339D
IH-1-63www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: M, MV (s/n 278050 & up), O6, W6 (s/n35464 & up)
248 CID 4 Cylinder Gas
4" Overbore Supplied, Standard Bore 3-7/8"
• Flat Head Standard Compression Piston
• Valve Length 5.875"
• Late Crank
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Bearing kit, camshaft (3 bearings)CBK-H248
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-356957R11)CRK264
Rod bearing kit, .010" (replaces 4-376716R11)CRK264-010
Rod bearing kit, .020" (replaces 4-376718R11)CRK264-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-356985R11 & 1-356986R11)
MBK264
Main bearing kit, .010" (replaces 2-376720R11
& 1-376721R11)
MBK264-010
Main bearing kit, .020" (replaces 2-376723R11
& 1-376724R11)
MBK264-020
IH-1-64www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: M, MV (s/n 278050 & up), O6, W6 (s/n35464 & up)
248 CID 4 Cylinder Gas
4" Overbore Supplied, Standard Bore 3-7/8"
• Flat Head Standard Compression Piston
• Valve Length 5.875"
• Late Crank
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1155A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1155A-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1155A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. Overbore
to 4".
PK155
Piston ring set, 4" overbore. 3 @ 3/32", 1 @ 1/4"
(1 used per engine)
PRS155
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)45748DAR
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK7510S
Gasket set, headVGK7510S
Gasket, oil pan46109DA
Valves & Valve PartsREPLACES
5.875" valve length
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH264
Valve, engine intake (4 used per engine)50731DA
Valve, engine exhaust (4 used per engine)50732DA
Spring, intake & exhaust valve (8 used per
engine)
356951R1
Guide, intake & exhaust valve (8 used per
engine)
8044DR
Key, intake & exhaust valves (16 used per
engine)
41339D
IH-1-65www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: M, MV (to s/n 278049), O6, OS6, W6 (tos/n 35463)
248 CID 4 Cylinder Gas
4" Overbore Supplied, Standard Bore 3-7/8"
• Stepped Head High Compression Piston
• Valve Length 5.875"
• Early Crank
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Bearing kit, camshaft (3 bearings)CBK-H248
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-45745DBX)CRK248
Rod bearing kit, .010" (replaces 4-377974R11)CRK248-010
Rod bearing kit, .020" (replaces 4-377976R11)CRK248-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces 2-45628DAX
& 1-45630DAX)
MBK248
Main bearing kit, .010" (replaces 2-377979R11
& 1-377980R11)
MBK248-010
Main bearing kit, .020" (replaces 2-377982R11
& 1-377983R11)
MBK248-020
IH-1-66www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: M, MV (to s/n 278049), O6, OS6, W6 (tos/n 35463)
248 CID 4 Cylinder Gas
4" Overbore Supplied, Standard Bore 3-7/8"
• Stepped Head High Compression Piston
• Valve Length 5.875"
• Early Crank
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1155B-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1155B-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1155A
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. Overbore
to 4".
PK155
Piston ring set, 4" overbore. 3 @ 3/32", 1 @ 1/4"
(1 used per engine)
PRS155
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)45748DAR
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK7510S
Gasket set, headVGK7510S
Gasket, oil pan46109DA
Valves & Valve PartsREPLACES
5.875" valve length
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH264
Valve, engine intake (4 used per engine)50731DA
Valve, engine exhaust (4 used per engine)50732DA
Spring, intake & exhaust valve (8 used per
engine)
356951R1
Guide, intake & exhaust valve (8 used per
engine)
8044DR
Key, intake & exhaust valves (16 used per
engine)
41339D
IH-1-67www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: M, MV (s/n 278050 & up), O6, OS6, W6(s/n 35464 & up)
248 CID 4 Cylinder Gas
4" Overbore Supplied, Standard Bore 3-7/8"
• Stepped Head High Compression Piston
• Valve Length 5.875"
• Late Crank
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Bearing kit, camshaft (3 bearings)CBK-H248
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-356957R11)CRK264
Rod bearing kit, .010" (replaces 4-376716R11)CRK264-010
Rod bearing kit, .020" (replaces 4-376718R11)CRK264-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-356985R11 & 1-356986R11)
MBK264
Main bearing kit, .010" (replaces 2-376720R11
& 1-376721R11)
MBK264-010
Main bearing kit, .020" (replaces 2-376723R11
& 1-376724R11)
MBK264-020
IH-1-68www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: M, MV (s/n 278050 & up), O6, OS6, W6(s/n 35464 & up)
248 CID 4 Cylinder Gas
4" Overbore Supplied, Standard Bore 3-7/8"
• Stepped Head High Compression Piston
• Valve Length 5.875"
• Late Crank
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1170-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1170-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1170S-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1170
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. For 3-9/16"
standard bore.
PK170
Piston ring set, 3-9/16" standard bore. 3 @ 3/32",
1 @ 3/16" (1 used per engine)
PRS170
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine). .875"
I.D., .935" O.D.
364913R1
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
and sleeves, where required)
GK7799S
Gasket set, headVGK7799S
Gasket set, lowerCS7799S
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
391976R91. Drop ship
99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
IH-1-69www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 560 (to engine s/n 36693), 660 (to engines/n 38981)
263 CID 6 Cylinder Gas
Standard Bore 3-9/16"
• Stepped Head Piston
• Thrust Bearing Flange 3-3/4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
1-21/32" diameter intake valve head
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH221
Valve overhaul kit. Contains intake & stellite
exhaust valves, springs, guides, valve keys.
VOKH221S
Valve, engine intake (6 used per engine)234275R1
Valve, engine exhaust (6 used per engine)367191R2
Valve, exhaust, Stellite (6 used per engine)372699R3
Spring, intake & exhaust valve (12 used per
engine)
367192R1
Guide, intake & exhaust (12 used per engine)237248R1
Key, intake & exhaust valve (24 used per engine)41339D
REPLACES Connecting Rod Bearing Kits1 kit used per engine
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
With flanged thrust bearings. 1 kit used per engine
REPLACES
3-3/4" diameter thrust bearing flange
Main bearing kit, standard (replaces
1-367276R91, 1-367282R91, 1-367279R91 &
1-367285R91)
MBK221
Main bearing kit, .010" (replaces 1-376670R91,
1-376673R91, 1-376676R91, & 1-376679R91)
MBK221-010
Main bearing kit, .020" (replaces 1-376683R91,
1-376686R91, 1-376689R91 & 1-376692R91)
MBK221-020
Oil Pump AssemblyREPLACES
Engine oil pump & screen assembly. Tractors:
560 (engine s/n 42218 & up), 660 (engine s/n
42218 & up), 706 (to engine s/n 51721), 2706
(to engine s/n 51721).
379138R91
IH-1-70www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 560 (to engine s/n 36693), 660 (to engines/n 38981)
263 CID 6 Cylinder Gas
Standard Bore 3-9/16"
• Stepped Head Piston
• Thrust Bearing Flange 3-3/4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1170A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1170A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, complete gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1170AS-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1170
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. For 3-9/16"
standard bore.
PK170
Piston ring set, 3-9/16" standard bore. 3 @ 3/32",
1 @ 3/16" (1 used per engine)
PRS170
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine). .875"
I.D., .935" O.D.
364913R1
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
and sleeves, where required)
GK7799S
Gasket set, headVGK7799S
Gasket set, lowerCS7799S
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
391976R91. Drop ship
99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
IH-1-71www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 560 (engine s/n 36694 & up), 660 (engines/n 38992 & up)
263 CID 6 Cylinder Gas
Standard Bore 3-9/16"
• Stepped Head Piston
• Thrust Bearing Flange 4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
1-21/32" diameter intake valve head
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH221
Valve overhaul kit. Contains intake & stellite
exhaust valves, springs, guides, valve keys.
VOKH221S
Valve, engine intake (6 used per engine)234275R1
Valve, engine exhaust (6 used per engine)367191R2
Valve, exhaust, Stellite (6 used per engine)372699R3
Spring, intake & exhaust valve (12 used per
engine)
367192R1
Guide, intake & exhaust (12 used per engine)237248R1
Key, intake & exhaust valve (24 used per engine)41339D
REPLACES Connecting Rod Bearing Kits1 kit used per engine
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
With flanged thrust bearings. 1 kit used per engine
REPLACES
4" diameter thrust bearing flange
Main bearing kit, standard (replaces
1-367276R91, 1-367278R91, 1-376279R91, &
1-376285R91)
MBK221A
Main bearing kit, .010" (replaces 1-376670R91,
1-332276R91, 1-376673R91, & 1-376679R91)
MBK221A-010
Main bearing kit, .020" (replaces 1-376683R91,
1-332279R91, 1-376686R91 & 1-376692R91)
MBK221A-020
Oil Pump AssemblyREPLACES
Engine oil pump & screen assembly. Tractors:
560 (engine s/n 42218 & up), 660 (engine s/n
42218 & up), 706 (to engine s/n 51721), 2706
(to engine s/n 51721).
379138R91
IH-1-72www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 560 (engine s/n 36694 & up), 660 (engines/n 38992 & up)
263 CID 6 Cylinder Gas
Standard Bore 3-9/16"
• Stepped Head Piston
• Thrust Bearing Flange 4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1177-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1177-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind gasket set, and oil pan
gasket kit.
BIFH1177
Sleeve & Piston KitREPLACES
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. For 3-9/16"
standard bore.
PK177
Piston ring set, 3-9/16" standard bore. 2 @ 3/32",
1 @ 1/4" (1 used per engine)
PRS177
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine). .875"
I.D., .935" O.D.
364913R1
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
and sleeves, where required)
GK7799S
Gasket set, headVGK7799S
Gasket set, lowerCS7799S
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
391976R91. Drop ship
99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
IH-1-73www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2656, 2706Tractor: 656, 706263 CID 6 Cylinder Gas
Standard Bore 3-9/16"
• Stepped Head Piston
• Thrust Bearing Flange 4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & stellite
exhaust valves, springs, intake & exhaust guides,
valve keys.
VOKH263S
Valve, engine intake (6 used per engine)234276R1
Valve, exhaust, Stellite (6 used per engine)372699R3
Spring, intake & exhaust valve (12 used per
engine)
367192R1
Guide, intake valve (6 used per engine)535229R1
Guide, exhaust valve (6 used per engine)237248R1
Key, intake & exhaust valve (24 used per engine)41339D
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
With flanged thrust bearings. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
1-367276R91, 1-367278R91, 1-376279R91, &
1-376285R91)
MBK221A
Main bearing kit, .010" (replaces 1-376670R91,
1-332276R91, 1-376673R91, & 1-376679R91)
MBK221A-010
Main bearing kit, .020" (replaces 1-376683R91,
1-332279R91, 1-376686R91 & 1-376692R91)
MBK221A-020
Oil Pump AssemblyREPLACES
Engine oil pump & screen assembly. Tractors:
560 (engine s/n 42218 & up), 660 (engine s/n
42218 & up), 706 (to engine s/n 51721), 2706
(to engine s/n 51721).
379138R91
IH-1-74www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2656, 2706Tractor: 656, 706263 CID 6 Cylinder Gas
Standard Bore 3-9/16"
• Stepped Head Piston
• Thrust Bearing Flange 4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1164-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1164-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1164
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
For engine with 1-5/16" diameter piston pin
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. Overbore
to 4-1/8".
PK164
Piston ring set, overbore to 4-1/8". 3 @ 3/32", 1
@ 1/4" (1 used per engine)
PRS164
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)45748DAR
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK7510S
Gasket set, headVGK7510S
Gasket, oil pan46109DA
IH-1-75www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: Super M, Super MTA, Super W6, SuperW6TA
264 CID 4 Cylinder Gas
4-1/8" Overbore Supplied, Standard Bore 4"
• Stepped Head High Compression Piston
• Piston pin 1-5/16" dia.
• Valve Length 5-7/8"
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
5-7/8" valve length
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH264
Valve, engine intake (4 used per engine)50731DA
Valve, engine exhaust (4 used per engine)50732DA
Spring, intake & exhaust valve (8 used per
engine)
356951R1
Guide, intake & exhaust valve (8 used per
engine)
8044DR
Key, intake & exhaust valves (16 used per
engine)
41339D
Cam BearingsREPLACES
Bearing kit, camshaft (3 bearings)CBK-H248
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-356957R11)CRK264
Rod bearing kit, .010" (replaces 4-376716R11)CRK264-010
Rod bearing kit, .020" (replaces 4-376718R11)CRK264-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-356985R11 & 1-356986R11)
MBK264
Main bearing kit, .010" (replaces 2-376720R11
& 1-376721R11)
MBK264-010
Main bearing kit, .020" (replaces 2-376723R11
& 1-376724R11)
MBK264-020
IH-1-76www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: Super M, Super MTA, Super W6, SuperW6TA
264 CID 4 Cylinder Gas
4-1/8" Overbore Supplied, Standard Bore 4"
• Stepped Head High Compression Piston
• Piston pin 1-5/16" dia.
• Valve Length 5-7/8"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1164-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1164A-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, oil pan gasket kit.
BIFH1164
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
For engines with 1" diameter piston pin
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. Overbore
to 4-1/8".
PK164
Piston ring set, overbore to 4-1/8". 3 @ 3/32", 1
@ 1/4" (1 used per engine)
PRS164
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)45748DAR
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK7510S
Gasket set, headVGK7510S
Gasket, oil pan46109DA
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH281
Valve, engine intake (4 used per engine)362435R1
Valve, engine exhaust (4 used per engine)362436R1
Spring, intake & exhaust valve (8 used per
engine)
356951R1
Guide, intake & exhaust valve (8 used per
engine)
8044DR
Key, intake & exhaust valves (16 used per
engine)
41339D
IH-1-77www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 400, W400 (to engine s/n 163807)264 CID 4 Cylinder Gas
4-1/8" Overbore Supplied, Standard Bore 4"
• Stepped Head High Compression Piston
• Piston pin 1-5/16" dia.
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Bearing kit, camshaft (3 bearings)CBK-H248
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-356957R11)CRK264
Rod bearing kit, .010" (replaces 4-376716R11)CRK264-010
Rod bearing kit, .020" (replaces 4-376718R11)CRK264-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-356985R11 & 1-356986R11)
MBK264
Main bearing kit, .010" (replaces 2-376720R11
& 1-376721R11)
MBK264-010
Main bearing kit, .020" (replaces 2-376723R11
& 1-376724R11)
MBK264-020
IH-1-78www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 400, W400 (to engine s/n 163807)264 CID 4 Cylinder Gas
4-1/8" Overbore Supplied, Standard Bore 4"
• Stepped Head High Compression Piston
• Piston pin 1-5/16" dia.
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1168-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
crankshaft seals, valves, springs, guides, and
keys.
EOK1168-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1168
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
For engines with 1" diameter piston pin
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, 1" pins & retainers. 4-1/8"
standard bore.
PK168
Piston ring set, standard bore 4-1/8". 3 @ 3/32",
1 @ 1/4" (1 used per engine)
PRS168
Piston Pin BushingsREPLACES
Bushing, piston pin, for 1" piston pin (4 used per
engine)
364921R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK7510S
Gasket set, headVGK7510S
Gasket, oil pan46109DA
Cam BearingsREPLACES
Bearing kit, camshaft (3 bearings)CBK-H248
IH-1-79www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 400, W400 (engine s/n 163808 & up)264 CID 4 Cylinder Gas
4-1/8" Overbore Supplied, Standard Bore 4"
• Stepped Head Piston with 1" Pin Dia.
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH281
Valve, engine intake (4 used per engine)362435R1
Valve, engine exhaust (4 used per engine)362436R1
Spring, intake & exhaust valve (8 used per
engine)
356951R1
Guide, intake & exhaust valve (8 used per
engine)
8044DR
Key, intake & exhaust valves (16 used per
engine)
41339D
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-356957R11)CRK264
Rod bearing kit, .010" (replaces 4-376716R11)CRK264-010
Rod bearing kit, .020" (replaces 4-376718R11)CRK264-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-356985R11 & 1-356986R11)
MBK264
Main bearing kit, .010" (replaces 2-376720R11
& 1-376721R11)
MBK264-010
Main bearing kit, .020" (replaces 2-376723R11
& 1-376724R11)
MBK264-020
IH-1-80www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 400, W400 (engine s/n 163808 & up)264 CID 4 Cylinder Gas
4-1/8" Overbore Supplied, Standard Bore 4"
• Stepped Head Piston with 1" Pin Dia.
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1168-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
crankshaft seals, valves, springs, guides, and
keys.
EOK1168-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1168
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
For engines with 1" diameter piston pin
Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, 1" pins & retainers. 4-1/8"
standard bore.
PK168
Piston ring set, standard bore 4-1/8". 3 @ 3/32",
1 @ 1/4" (1 used per engine)
PRS168
Piston Pin BushingsREPLACES
Bushing, piston pin, for 1" piston pin (4 used per
engine)
364921R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK7510S
Gasket set, headVGK7510S
Gasket, oil pan46109DA
Cam BearingsREPLACES
Bearing kit, camshaft (3 bearings)CBK-H248
IH-1-81www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 450, W450281 CID 4 Cylinder Gas
4-1/8" Overbore Supplied, Standard Bore 4"
• Stepped Head Piston with 1" Pin Dia.
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH281
Valve, engine intake (4 used per engine)362435R1
Valve, engine exhaust (4 used per engine)362436R1
Spring, intake & exhaust valve (8 used per
engine)
356951R1
Guide, intake & exhaust valve (8 used per
engine)
8044DR
Key, intake & exhaust valves (16 used per
engine)
41339D
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-356957R11)CRK264
Rod bearing kit, .010" (replaces 4-376716R11)CRK264-010
Rod bearing kit, .020" (replaces 4-376718R11)CRK264-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
2-356985R11 & 1-356986R11)
MBK264
Main bearing kit, .010" (replaces 2-376720R11
& 1-376721R11)
MBK264-010
Main bearing kit, .020" (replaces 2-376723R11
& 1-376724R11)
MBK264-020
IH-1-82www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 450, W450281 CID 4 Cylinder Gas
4-1/8" Overbore Supplied, Standard Bore 4"
• Stepped Head Piston with 1" Pin Dia.
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
kit with crankshaft seals.
BEKH1189-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1189-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, oil pan gasket kit.
BIFH1189
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
For engines with bore classification markings 1
or 2
Contour Stepped Head Piston
Sleeve & piston kit. Contains sleeves, stepped
head pistons, rings, pins & retainers. For 3-3/4"
standard bore.
PK189
Piston ring set, 3-3/4" standard bore. 1 @ 1/8", 1
@ 3/32", 1 @ 1/4" (1 used per engine)
PRS189
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine). .875"
I.D., .935" O.D.
364913R1
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
and sleeves, where required)
GK7799S
Gasket set, headVGK7799S
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
391976R91. Drop ship
99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
IH-1-83www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2706, 2756Tractor: 666, 686, 706, 756, 766, Hydro 70, Hydro
86291 CID 6 Cylinder Gas
Standard Bore 3-3/4"
• Contour Step Head Piston
• For engines with bore classification markings 1 or 2. Crankcase bore
classifications are stamped on top of filter base mounting pad
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & stellite
exhaust valves, springs, intake & exhaust guides,
valve keys.
VOKH263S
Valve, engine intake (6 used per engine)234276R1
Valve, exhaust, Stellite (6 used per engine)372699R3
Spring, intake & exhaust valve (12 used per
engine)
367192R1
Guide, intake valve (6 used per engine)535229R1
Guide, exhaust valve (6 used per engine)237248R1
Key, intake & exhaust valve (24 used per engine)41339D
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
With flanged thrust bearings. 1 kit used per engine
REPLACES
4" diameter thrust bearing flange
Main bearing kit, standard (replaces
1-367276R91, 1-367278R91, 1-376279R91, &
1-376285R91)
MBK221A
Main bearing kit, .010" (replaces 1-376670R91,
1-332276R91, 1-376673R91, & 1-376679R91)
MBK221A-010
Main bearing kit, .020" (replaces 1-376683R91,
1-332279R91, 1-376686R91 & 1-376692R91)
MBK221A-020
Oil Pump AssemblyREPLACES
Engine oil pump & screen assembly. Tractors:
560 (engine s/n 42218 & up), 660 (engine s/n
42218 & up), 706 (to engine s/n 51721), 2706
(to engine s/n 51721).
379138R91
IH-1-84www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2706, 2756Tractor: 666, 686, 706, 756, 766, Hydro 70, Hydro
86291 CID 6 Cylinder Gas
Standard Bore 3-3/4"
• Contour Step Head Piston
• For engines with bore classification markings 1 or 2. Crankcase bore
classifications are stamped on top of filter base mounting pad
1ENGINES
Replacement parts to fit
I.H.C.
Piston Ring SetREPLACES
Piston ring set, 3-13/16" bore. 1 @ 1/8", 1 @
3/32", 1 @ 1/4" (1 used per engine)
PRS1436
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine). .875"
I.D., .935" O.D.
364913R1
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
and sleeves, where required)
GK7799S
Gasket set, headVGK7799S
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
391976R91. Drop ship
99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & stellite
exhaust valves, springs, intake & exhaust guides,
valve keys.
VOKH263S
Valve, engine intake (6 used per engine)234276R1
Valve, exhaust, Stellite (6 used per engine)372699R3
Spring, intake & exhaust valve (12 used per
engine)
367192R1
Guide, intake valve (6 used per engine)535229R1
Guide, exhaust valve (6 used per engine)237248R1
Key, intake & exhaust valve (24 used per engine)41339D
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
IH-1-85www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2806, 2826, 2856Tractor: 806, 826, 856301 CID 6 Cylinder Gas
Standard Bore 3-13/16"
• Contour Step Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
With flanged thrust bearings. 1 kit used per engine
REPLACES
4" diameter thrust bearing flange
Main bearing kit, standard (replaces
1-367276R91, 1-367278R91, 1-376279R91, &
1-376285R91)
MBK221A
Main bearing kit, .010" (replaces 1-376670R91,
1-332276R91, 1-376673R91, & 1-376679R91)
MBK221A-010
Main bearing kit, .020" (replaces 1-376683R91,
1-332279R91, 1-376686R91 & 1-376692R91)
MBK221A-020
Oil Pump AssemblyREPLACES
Engine oil pump & screen assembly. Tractors:
560 (engine s/n 42218 & up), 660 (engine s/n
42218 & up), 706 (to engine s/n 51721), 2706
(to engine s/n 51721).
379138R91
IH-1-86www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2806, 2826, 2856Tractor: 806, 826, 856301 CID 6 Cylinder Gas
Standard Bore 3-13/16"
• Contour Step Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH4144D-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK4144D-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH4144D
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Flat Head Piston
Sleeve & piston kit. 3-3/8" standard bore.
Contains sleeves, sleeve seals, pistons, rings,
pins & retainers.
PK4144D
Piston ring set, for 3-3/8" standard bore. 3 @
3/32", 2 @ 3/16" (1 used per engine)
PRS4144D
Piston Pin BushingsREPLACES
Piston pin bushings (4 used per engine)3043611R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK4154D
Gasket set, headHS4154D
Gasket set, lowerCS4154D
Gasket, oil pan703840R1
Seal, crankshaft, front3108650R91
Seal, crankshaft, rear3072092R91
Cam BearingsREPLACES
Bearing kit, camshaft (3 bearings)CBK-H144
IH-1-87www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 354, 434, B250, B275, B276144 CID 4 Cylinder Diesel
Standard Bore 3-3/8"
• Flat Head Piston
• BD144 & BD144A
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, inner & outer springs, inner & exhaust
guides, valve keys.
VOKH144
Valve, engine intake (4 used per engine)3040361R1
Valve, engine exhaust (4 used per engine)3043825R1
Spring, intake & exhaust valve, inner (8 used per
engine)
3044239R1
Spring, intake & exhaust valve, outer (8 used per
engine)
3044240R1
Guide, intake valve (4 used per engine)3044492R1
Guide, exhaust valve (4 used per engine)3044493R2
Key, intake & exhaust valve (16 used per engine)704443R1
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces
1-3070536R11)
CRK4154D
Rod bearing kit, .010"CRK4154D-010
Rod bearing kit, .020"CRK4154D-020
Main Bearing Kit
1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
4-3064523R11 & 1-708910R91)
MBK4154D
Main bearing kit, .010"MBK4154D-010
Main bearing kit, .020"MBK4154D-020
IH-1-88www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 354, 434, B250, B275, B276144 CID 4 Cylinder Diesel
Standard Bore 3-3/8"
• Flat Head Piston
• BD144 & BD144A
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH4154D-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK4154D-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH4154D
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Flat Head Piston
Sleeve & piston kit. 3-1/2" standard bore.
Contains sleeves, sleeve seals, pistons, rings,
pins & retainers.
PK4154D
Piston ring set, for 3-1/2" standard bore. 3 @
3/32", 2 @ 3/16" (1 used per engine)
PRS4154D
Piston Pin BushingsREPLACES
Piston pin bushings (4 used per engine)3043611R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK4154D
Gasket set, headHS4154D
Gasket set, lowerCS4154D
Gasket, oil pan703840R1
Seal, crankshaft, front3108650R91
Seal, crankshaft, rear3072092R91
Cam BearingsREPLACES
Bearing kit, camshaft (3 bearings)CBK-H144
IH-1-89www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2424, 2444Tractor: 238, 364, 384, 424, 434, 444, B414154 CID 4 Cylinder Diesel
Standard Bore 3-1/2"
• Flat Head Piston
• BD154
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, inner & outer springs, inner & exhaust
guides, valve keys.
VOKH144
Valve, engine intake (4 used per engine)3040361R1
Valve, engine exhaust (4 used per engine)3043825R1
Spring, intake & exhaust valve, inner (8 used per
engine)
3044239R1
Spring, intake & exhaust valve, outer (8 used per
engine)
3044240R1
Guide, intake valve (4 used per engine)3044492R1
Guide, exhaust valve (4 used per engine)3044493R2
Key, intake & exhaust valve (16 used per engine)704443R1
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces
1-3070536R11)
CRK4154D
Rod bearing kit, .010"CRK4154D-010
Rod bearing kit, .020"CRK4154D-020
Main Bearing Kit
1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
4-3064523R11 & 1-708910R91)
MBK4154D
Main bearing kit, .010"MBK4154D-010
Main bearing kit, .020"MBK4154D-020
IH-1-90www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2424, 2444Tractor: 238, 364, 384, 424, 434, 444, B414154 CID 4 Cylinder Diesel
Standard Bore 3-1/2"
• Flat Head Piston
• BD154
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH179D-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK179D-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH179D
Sleeve & Piston Kit
Complete for 3 cylinders (1 used per engine)
REPLACES
Sleeve & piston kit, 3-7/8" bore. Contains
sleeves, sleeve seals, pistons, rings, pins &
retainers.
PK179D
Piston ring set, for 3-7/8" standard bore. 1 @ 1/8"
K, 1 @ 3/32", 1 @ 3/16" (1 used per engine)
PRS179D
Piston Pin BushingsREPLACES
Bushing, piston pin (3 used per engine)3132018R2
Gaskets and Gasket SetREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK179D
Gasket set, headHS179D
Gasket set, lowerCS179D
Gasket, oil pan3055160R3
Seal, crankshaft, front (package, with wear ring)3228133R93
Seal, crankshaft, rear3138701R91
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH179
Valve, engine intake (3 used per engine)3055055R2
Valve, engine exhaust (3 used per engine)3055056R2
Spring, intake & exhaust valve (6 used per
engine)
3055060R1
Guide, intake & exhaust valve (6 used per
engine)
3055022R2
Key, intake & exhaust valve (12 used per engine)3055057R91
IH-1-91www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 454, 464, 484179 CID 3 Cylinder Diesel
Standard Bore 3-7/8"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces
3-3055351R91)
CRK179D
Rod bearing kit, .010" (replaces 3-3056834R11)CRK179D-010
Rod bearing kit, .020" (replaces 3-3056879R11)CRK179D-020
Main Bearing Kits
With flanged thrust bearings. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
3-3055130R21 & 1-3055129R21)
MBK179D
Main bearing kit, .010" (replaces 3-3056832R21
& 1-3056820R11)
MBK179D-010
Main bearing kit, .020" (replaces 3-3056877R21
& 1-3056875R11)
MBK179D-020
IH-1-92www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 454, 464, 484179 CID 3 Cylinder Diesel
Standard Bore 3-7/8"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1181-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1181-LCB
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
4.165" O.D. sleeve flange
Cupped Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. For 3-11/16" standard
bore.
PK181
Piston ring set, 3-11/16" standard bore. 1 @ 1/8"
top, 1/2" keystone ring, 1 @ 1/8", 1 @ 1/4" (1 used
per engine)
PRS181
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)306708R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK8337SB
Gasket set, headVGK8337SB
Speedi Sleeve, for front crankshaft seal.
391976R91. Drop ship
99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH188
Valve, engine intake (4 used per engine)278301R1
Valve, engine exhaust (4 used per engine)278302R1
Spring, intake & exhaust valve (8 used per
engine)
315744R1
Guide, intake & exhaust valve (8 used per
engine)
278300R1
Key, intake & exhaust valves (16 used per
engine)
41339D
IH-1-93www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 3514Tractor: 504, 2504188 CID 4 Cylinder Diesel
Standard Bore 3-11/16"
• Cupped Head Piston
• Sleeve Flange Dia. 4.165"
• Farmall Tractors (to engine s/n 12092), International Tractors (to engine
s/n 11524)
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (contains 3 bearings)CBK-H188
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-367408R11)CRK-H166D
Rod bearing kit, .002" (replaces 4-367632R11)CRK-H166D-002
Rod bearing kit, .010" (replaces 4-376666R11)CRK-H166D-010
Rod bearing kit, .020" (replaces 4-376668R11)CRK-H166D-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
1-367276R91, 1-367282R91, & 1-367279R91)
MBK-H166D
Main bearing kit, .010" (replaces 1-376676R91,
1-376670R91, & 1-376673R91)
MBK-H166D-010
Main bearing kit, .020" (replaces 1-376683R91,
1-376686R91, & 1-376689R91)
MBK-H166D-020
IH-1-94www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 3514Tractor: 504, 2504188 CID 4 Cylinder Diesel
Standard Bore 3-11/16"
• Cupped Head Piston
• Sleeve Flange Dia. 4.165"
• Farmall Tractors (to engine s/n 12092), International Tractors (to engine
s/n 11524)
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1182-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1182-LCB
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Sleeve & piston kit. Contains sleeves, cupped
head pistons, rings, pins & retainers. For 3-11/16"
standard bore.
PK182
Piston ring set, 3-11/16" standard bore. 1 @ 1/8"
top, 1/2" keystone ring, 1 @ 1/8", 1 @ 1/4" (1 used
per engine)
PRS181
Piston Pin BushingsREPLACES
Bushing, piston pin (4 used per engine)306708R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK8337SB
Gasket set, headVGK8337SB
Speedi Sleeve, for front crankshaft seal.
317549R91. *Drop Ship99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH188
Valve, engine intake (4 used per engine)278301R1
Valve, engine exhaust (4 used per engine)278302R1
Spring, intake & exhaust valve (8 used per
engine)
315744R1
Guide, intake & exhaust valve (8 used per
engine)
278300R1
Key, intake & exhaust valves (16 used per
engine)
41339D
IH-1-95www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 3514Tractor: 504, 2504188 CID 4 Cylinder Diesel
Standard Bore 3-11/16"
• Cupped Head Piston
• Sleeve Flange Dia. 3.873"
• Farmall Tractors (engine s/n 12033 & up), International Tractors (engine
s/n 11525 & up)
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (contains 3 bearings)CBK-H188
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 4-367408R11)CRK-H166D
Rod bearing kit, .002" (replaces 4-367632R11)CRK-H166D-002
Rod bearing kit, .010" (replaces 4-376666R11)CRK-H166D-010
Rod bearing kit, .020" (replaces 4-376668R11)CRK-H166D-020
Main Bearing Kits
With flanged thrust bearing. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
1-367276R91, 1-367282R91, & 1-367279R91)
MBK-H166D
Main bearing kit, .010" (replaces 1-376676R91,
1-376670R91, & 1-376673R91)
MBK-H166D-010
Main bearing kit, .020" (replaces 1-376683R91,
1-376686R91, & 1-376689R91)
MBK-H166D-020
IH-1-96www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 3514Tractor: 504, 2504188 CID 4 Cylinder Diesel
Standard Bore 3-11/16"
• Cupped Head Piston
• Sleeve Flange Dia. 3.873"
• Farmall Tractors (engine s/n 12033 & up), International Tractors (engine
s/n 11525 & up)
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH206D-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOKH206D-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH206D
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Cupped Head Piston
Sleeve & piston kit. Contains sleeves, sleeve
seals, pistons, rings, pins & retainers. 3-7/8"
standard bore.
PKH206D
Piston ring set, 3-7/8" bore. 1 @ 1/8" K, 1 @ 3/32",
1 @ 3/16" (1 used per engine)
PRS239D
Piston Pin BushingsREPLACES
Piston pin bushings (4 used per engine)3132018R2
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK4239D
Gasket set, headHS4239D
Gasket set, lowerCS4239D
Gasket, oil pan3055161R3
Seal, crankshaft, front (package, with wear ring)3228133R93
Seal, crankshaft, rear3138701R91
IH-1-97www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 474, 584, 585206 CID 4 Cylinder Diesel
Standard Bore 3-7/8"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH239
Valve, engine intake (4 used per engine)3055055R2
Valve, engine exhaust (4 used per engine)3055056R2
Spring, intake & exhaust valves (8 used per
engine)
3055060R1
Guide, intake & exhaust valve (8 used per
engine)
3055022R2
Key, intake & exhaust valve (16 used per engine)3055057R91
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces
4-3055351R91)
CRK239D
Rod bearing kit, .010" (replaces 4-3056834R91)CRK239D-010
Rod bearing kit, .020" (replaces 4-3056879R91)CRK239D-020
Main Bearing Kit
1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
4-3055130R21 & 1-3055129R21)
MBK239D
Main bearing kit, .010" (replaces 4-3056832R21
& 1-3056820R21)
MBK239D-010
Main bearing kit, .020" (replaces 4-3056877R21
& 1-3056875R21)
MBK239D-020
IH-1-98www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 474, 584, 585206 CID 4 Cylinder Diesel
Standard Bore 3-7/8"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1173-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1173-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1173
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
4.165" O.D. sleeve flange
Cupped Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. For 3-11/16" standard
bore.
PK173
Piston ring set for 6 pistons, 3-11/16" standard
bore. 1 @ 1/8" top, 1/2" keystone ring, 1 @ 1/8",
1 @ 1/4".
PRS173
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)306708R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK8334SB
Gasket set, headVGK8334SB
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
317549R91. *Drop Ship99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
IH-1-99www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 460236 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
Engine Serial Number: 5611 to 10983
• Cupped Head Piston
• Piston pin 1-1/8" dia.
• Sleeve Flange Dia. 4.165"
• Thrust Bearing Flange 3-3/4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH282A
Valve, engine intake (6 used per engine)278301R1
Valve, engine exhaust (6 used per engine)278302R1
Spring, intake & exhaust valve (12 used per
engine)
367192R1
Guide, intake & exhaust valve (12 used per
engine)
278300R1
Key, intake & exhaust valve (24 used per engine)41339D
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
Thrust bearing flange 3-3/4" dia. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
1-367276R91, 1-367282R91, 1-367279R91 &
1-367285R91)
MBK221
Main bearing kit, .010" (replaces 1-376670R91,
1-376673R91, 1-376676R91, & 1-376679R91)
MBK221-010
Main bearing kit, .020" (replaces 1-376683R91,
1-376686R91, 1-376689R91 & 1-376692R91)
MBK221-020
IH-1-100www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 460236 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
Engine Serial Number: 5611 to 10983
• Cupped Head Piston
• Piston pin 1-1/8" dia.
• Sleeve Flange Dia. 4.165"
• Thrust Bearing Flange 3-3/4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1173-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1173B-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1173
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
4.165" O.D. sleeve flange
Cupped Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. For 3-11/16" standard
bore.
PK173
Piston ring set for 6 pistons, 3-11/16" standard
bore. 1 @ 1/8" top, 1/2" keystone ring, 1 @ 1/8",
1 @ 1/4".
PRS173
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)306708R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK8334SB
Gasket set, headVGK8334SB
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
317549R91. *Drop Ship99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH282B
Valve, engine intake (6 used per engine)278301R1
Valve, engine exhaust (6 used per engine)278302R1
IH-1-101www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 460236 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
Engine Serial Number: 10984 to 13753
• Cupped Head Piston
• Piston pin 1-1/8" dia.
• Sleeve Flange Dia. 4.165"
• Thrust Bearing Flange 3-3/4" Diameter
1ENGINES
Replacement parts to fit
I.H.C.
Spring, intake & exhaust valve (12 used per
engine)
315744R1
Guide, intake & exhaust valve (12 used per
engine)
278300R1
Key, intake & exhaust valve (24 used per engine)41339D
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
Thrust bearing flange 3-3/4" dia. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
1-367276R91, 1-367282R91, 1-367279R91 &
1-367285R91)
MBK221
Main bearing kit, .010" (replaces 1-376670R91,
1-376673R91, 1-376676R91, & 1-376679R91)
MBK221-010
Main bearing kit, .020" (replaces 1-376683R91,
1-376686R91, 1-376689R91 & 1-376692R91)
MBK221-020
IH-1-102www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 460236 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
Engine Serial Number: 10984 to 13753
• Cupped Head Piston
• Piston pin 1-1/8" dia.
• Sleeve Flange Dia. 4.165"
• Thrust Bearing Flange 3-3/4" Diameter
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1173A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1173A-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1173
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
4.165" O.D. sleeve flange
Cupped Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. For 3-11/16" standard
bore.
PK173
Piston ring set for 6 pistons, 3-11/16" standard
bore. 1 @ 1/8" top, 1/2" keystone ring, 1 @ 1/8",
1 @ 1/4".
PRS173
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)306708R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK8334SB
Gasket set, headVGK8334SB
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
317549R91. *Drop Ship99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
IH-1-103www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 460236 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
Engine Serial Number: 13754 and up
• Cupped Head Piston
• Piston pin 1-1/8" dia.
• Sleeve Flange Dia. 4.165"
• Thrust Bearing Flange 4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH282B
Valve, engine intake (6 used per engine)278301R1
Valve, engine exhaust (6 used per engine)278302R1
Spring, intake & exhaust valve (12 used per
engine)
315744R1
Guide, intake & exhaust valve (12 used per
engine)
278300R1
Key, intake & exhaust valve (24 used per engine)41339D
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
Thrust bearing flange 4" dia. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
1-367276R91, 1-367278R91, 1-376279R91, &
1-376285R91)
MBK221A
Main bearing kit, .010" (replaces 1-376670R91,
1-332276R91, 1-376673R91, & 1-376679R91)
MBK221A-010
Main bearing kit, .020" (replaces 1-376683R91,
1-332279R91, 1-376686R91 & 1-376692R91)
MBK221A-020
IH-1-104www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 460236 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
Engine Serial Number: 13754 and up
• Cupped Head Piston
• Piston pin 1-1/8" dia.
• Sleeve Flange Dia. 4.165"
• Thrust Bearing Flange 4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1173-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1173C-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1173
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
4.165" O.D. sleeve flange
Cupped Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. For 3-11/16" standard
bore.
PK173
Piston ring set for 6 pistons, 3-11/16" standard
bore. 1 @ 1/8" top, 1/2" keystone ring, 1 @ 1/8",
1 @ 1/4".
PRS173
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)306708R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK8334SB
Gasket set, headVGK8334SB
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
317549R91. *Drop Ship99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
IH-1-105www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2606Tractor: 606236 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
Engine Serial Number: to 13753
• Cupped Head Piston
• Piston pin 1-1/8" dia.
• Sleeve Flange Dia. 4.165"
• Thrust Bearing Flange 3-3/4" Diameter
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH282C
Valve, engine intake (6 used per engine)323774R1
Valve, engine exhaust (6 used per engine)612312C1
Spring, intake & exhaust valve (12 used per
engine)
315744R1
Guide, intake & exhaust valve (12 used per
engine)
278300R1
Key, intake & exhaust valve (24 used per engine)41339D
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
Thrust bearing flange 3-3/4" dia. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
1-367276R91, 1-367282R91, 1-367279R91 &
1-367285R91)
MBK221
Main bearing kit, .010" (replaces 1-376670R91,
1-376673R91, 1-376676R91, & 1-376679R91)
MBK221-010
Main bearing kit, .020" (replaces 1-376683R91,
1-376686R91, 1-376689R91 & 1-376692R91)
MBK221-020
IH-1-106www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2606Tractor: 606236 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
Engine Serial Number: to 13753
• Cupped Head Piston
• Piston pin 1-1/8" dia.
• Sleeve Flange Dia. 4.165"
• Thrust Bearing Flange 3-3/4" Diameter
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1173A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1173D-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1173
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
4.165" O.D. sleeve flange
Cupped Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. For 3-11/16" standard
bore.
PK173
Piston ring set for 6 pistons, 3-11/16" standard
bore. 1 @ 1/8" top, 1/2" keystone ring, 1 @ 1/8",
1 @ 1/4".
PRS173
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)306708R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK8334SB
Gasket set, headVGK8334SB
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
317549R91. *Drop Ship99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
IH-1-107www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2606Tractor: 606236 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
Engine Serial Number: 13754 to 16620
• Cupped Head Piston
• Piston pin 1-1/8" dia.
• Sleeve Flange Dia. 4.165"
• Thrust Bearing Flange 4" Diameter
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH282C
Valve, engine intake (6 used per engine)323774R1
Valve, engine exhaust (6 used per engine)612312C1
Spring, intake & exhaust valve (12 used per
engine)
315744R1
Guide, intake & exhaust valve (12 used per
engine)
278300R1
Key, intake & exhaust valve (24 used per engine)41339D
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
Thrust bearing flange 4" dia. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
1-367276R91, 1-367278R91, 1-376279R91, &
1-376285R91)
MBK221A
Main bearing kit, .010" (replaces 1-376670R91,
1-332276R91, 1-376673R91, & 1-376679R91)
MBK221A-010
Main bearing kit, .020" (replaces 1-376683R91,
1-332279R91, 1-376686R91 & 1-376692R91)
MBK221A-020
IH-1-108www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2606Tractor: 606236 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
Engine Serial Number: 13754 to 16620
• Cupped Head Piston
• Piston pin 1-1/8" dia.
• Sleeve Flange Dia. 4.165"
• Thrust Bearing Flange 4" Diameter
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1173E-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1173E-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1173E
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
3.873" O.D. sleeve flange
Cupped Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. For 3-11/16" standard
bore.
PK183
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)306708R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK8334SB
Gasket set, headVGK8334SB
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
317549R91. *Drop Ship99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH282C
Valve, engine intake (6 used per engine)323774R1
Valve, engine exhaust (6 used per engine)612312C1
Spring, intake & exhaust valve (12 used per
engine)
315744R1
Guide, intake & exhaust valve (12 used per
engine)
278300R1
Key, intake & exhaust valve (24 used per engine)41339D
IH-1-109www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2606Tractor: 606236 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
Engine Serial Number: 16621 and up
• Cupped Head Piston
• Sleeve Flange Dia. 3.873"
• Thrust Bearing Flange 4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
Thrust bearing flange 4" dia. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
1-367276R91, 1-367278R91, 1-376279R91, &
1-376285R91)
MBK221A
Main bearing kit, .010" (replaces 1-376670R91,
1-332276R91, 1-376673R91, & 1-376679R91)
MBK221A-010
Main bearing kit, .020" (replaces 1-376683R91,
1-332279R91, 1-376686R91 & 1-376692R91)
MBK221A-020
IH-1-110www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2606Tractor: 606236 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
Engine Serial Number: 16621 and up
• Cupped Head Piston
• Sleeve Flange Dia. 3.873"
• Thrust Bearing Flange 4" Dia.
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH239D-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK239D-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH239D
Sleeve & Piston Kit
Complete for 4 cylinders (1 used per engine)
REPLACES
Cupped Head Piston
Sleeve & piston kit, 3-7/8" bore. Contains
sleeves, sleeve seals, pistons, rings, pins &
retainer.
PK239D
Piston ring set, 3-7/8" bore. 1 @ 1/8" K, 1 @ 3/32",
1 @ 3/16" (1 used per engine)
PRS239D
Piston Pin BushingsREPLACES
Piston pin bushings (4 used per engine)3132018R2
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK4239D
Gasket set, headHS4239D
Gasket set, lowerCS4239D
Gasket, oil pan3055161R3
Seal, crankshaft, front (package, with wear ring)3228133R93
Seal, crankshaft, rear3138701R91
IH-1-111www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2544Tractor: 544, 574, 664, 674, 684239 CID 4 Cylinder Diesel
Standard Bore 3-7/8"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH239
Valve, engine intake (4 used per engine)3055055R2
Valve, engine exhaust (4 used per engine)3055056R2
Spring, intake & exhaust valves (8 used per
engine)
3055060R1
Guide, intake & exhaust valve (8 used per
engine)
3055022R2
Key, intake & exhaust valve (16 used per engine)3055057R91
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces
4-3055351R91)
CRK239D
Rod bearing kit, .010" (replaces 4-3056834R91)CRK239D-010
Rod bearing kit, .020" (replaces 4-3056879R91)CRK239D-020
Main Bearing Kit
1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
4-3055130R21 & 1-3055129R21)
MBK239D
Main bearing kit, .010" (replaces 4-3056832R21
& 1-3056820R21)
MBK239D-010
Main bearing kit, .020" (replaces 4-3056877R21
& 1-3056875R21)
MBK239D-020
IH-1-112www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2544Tractor: 544, 574, 664, 674, 684239 CID 4 Cylinder Diesel
Standard Bore 3-7/8"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1174-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1174-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1174
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
4.165" O.D. sleeve flange
Cupped Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. For 3-11/16" standard
bore
PK174
Sleeve & piston kit. Contains sleeves, (.005"
oversized O.D.) pistons, rings, pins & retainers.
For 3-11/16" standard bore
PK174-005
Piston ring set, 3-11/16" standard bore, 2 @ 1/8"
(top ring is half keystone), 1 @ 1/4" (1 used per
engine)
PRS174
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)306708R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK8334SB
Gasket set, headVGK8334SB
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
317549R91. *Drop Ship99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
IH-1-113www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 560 (engine s/n 6766 to s/n 29264), 660(engine s/n 4370 to s/n 29264)
282 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
• Cupped Head Piston
• Sleeve Flange Dia. 4.165"
• Exhaust Valve Head Dia. 1.300"
• Thrust Bearing Flange 3-3/4"
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH282A
Valve, engine intake (6 used per engine)278301R1
Valve, engine exhaust (6 used per engine)278302R1
Spring, intake & exhaust valve (12 used per
engine)
367192R1
Guide, intake & exhaust valve (12 used per
engine)
278300R1
Key, intake & exhaust valve (24 used per engine)41339D
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
Thrust bearing flange 3-3/4" dia. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
1-367276R91, 1-367282R91, 1-367279R91 &
1-367285R91)
MBK221
Main bearing kit, .010" (replaces 1-376670R91,
1-376673R91, 1-376676R91, & 1-376679R91)
MBK221-010
Main bearing kit, .020" (replaces 1-376683R91,
1-376686R91, 1-376689R91 & 1-376692R91)
MBK221-020
IH-1-114www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 560 (engine s/n 6766 to s/n 29264), 660(engine s/n 4370 to s/n 29264)
282 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
• Cupped Head Piston
• Sleeve Flange Dia. 4.165"
• Exhaust Valve Head Dia. 1.300"
• Thrust Bearing Flange 3-3/4"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1174-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1174C-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1174
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
4.165" O.D. sleeve flange
Cupped Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. For 3-11/16" standard
bore
PK174
Sleeve & piston kit. Contains sleeves, (.005"
oversized O.D.) pistons, rings, pins & retainers.
For 3-11/16" standard bore
PK174-005
Piston ring set, 3-11/16" standard bore, 2 @ 1/8"
(top ring is half keystone), 1 @ 1/4" (1 used per
engine)
PRS174
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)306708R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK8334SB
Gasket set, headVGK8334SB
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
317549R91. *Drop Ship99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
IH-1-115www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 560, 660282 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
Engine Serial Number: 29265 to 40698
• Cupped Head Piston
• Piston pin 1-1/8" dia.
• Sleeve Flange Dia. 4.165"
• Thrust Bearing Flange 3-3/4" Diameter
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH282B
Valve, engine intake (6 used per engine)278301R1
Valve, engine exhaust (6 used per engine)278302R1
Spring, intake & exhaust valve (12 used per
engine)
315744R1
Guide, intake & exhaust valve (12 used per
engine)
278300R1
Key, intake & exhaust valve (24 used per engine)41339D
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
Thrust bearing flange 3-3/4" dia. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
1-367276R91, 1-367282R91, 1-367279R91 &
1-367285R91)
MBK221
Main bearing kit, .010" (replaces 1-376670R91,
1-376673R91, 1-376676R91, & 1-376679R91)
MBK221-010
Main bearing kit, .020" (replaces 1-376683R91,
1-376686R91, 1-376689R91 & 1-376692R91)
MBK221-020
IH-1-116www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 560, 660282 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
Engine Serial Number: 29265 to 40698
• Cupped Head Piston
• Piston pin 1-1/8" dia.
• Sleeve Flange Dia. 4.165"
• Thrust Bearing Flange 3-3/4" Diameter
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1174-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1174A-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1174
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. For 3-11/16" standard
bore
PK174
Sleeve & piston kit. Contains sleeves, (.005"
oversized O.D.) pistons, rings, pins & retainers.
For 3-11/16" standard bore
PK174-005
Piston ring set, 3-11/16" standard bore, 2 @ 1/8"
(top ring is half keystone), 1 @ 1/4" (1 used per
engine)
PRS174
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)306708R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK8334SB
Gasket set, headVGK8334SB
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
391976R91. Drop ship
99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
IH-1-117www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2656, 2706 (to s/n 44821)Tractor: 560, 660 (engine s/n 40699 to s/n 44821),
656, 706282 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
• Cupped Head Piston
• Sleeve Flange Dia. 4.165"
• Exhaust Valve Head Dia. 1-3/8"
• Thrust Bearing Flange 3-3/4"
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH282C
Valve, engine intake (6 used per engine)323774R1
Valve, engine exhaust (6 used per engine)612312C1
Spring, intake & exhaust valve (12 used per
engine)
315744R1
Guide, intake & exhaust valve (12 used per
engine)
278300R1
Key, intake & exhaust valve (24 used per engine)41339D
REPLACES Connecting Rod Bearing Kits1 kit used per engine
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
Thrust bearing flange 3-3/4" dia. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
1-367276R91, 1-367282R91, 1-367279R91 &
1-367285R91)
MBK221
Main bearing kit, .010" (replaces 1-376670R91,
1-376673R91, 1-376676R91, & 1-376679R91)
MBK221-010
Main bearing kit, .020" (replaces 1-376683R91,
1-376686R91, 1-376689R91 & 1-376692R91)
MBK221-020
Oil Pump AssemblyREPLACES
Engine oil pump & screen assembly. Tractors:
560 (engine s/n 42218 & up), 660 (engine s/n
42218 & up), 706 (to engine s/n 51721), 2706
(to engine s/n 51721).
379138R91
IH-1-118www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2656, 2706 (to s/n 44821)Tractor: 560, 660 (engine s/n 40699 to s/n 44821),
656, 706282 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
• Cupped Head Piston
• Sleeve Flange Dia. 4.165"
• Exhaust Valve Head Dia. 1-3/8"
• Thrust Bearing Flange 3-3/4"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1174B-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1174B-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1174
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. For 3-11/16" standard
bore
PK174
Sleeve & piston kit. Contains sleeves, (.005"
oversized O.D.) pistons, rings, pins & retainers.
For 3-11/16" standard bore
PK174-005
Piston ring set, 3-11/16" standard bore, 2 @ 1/8"
(top ring is half keystone), 1 @ 1/4" (1 used per
engine)
PRS174
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)306708R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK8334SB
Gasket set, headVGK8334SB
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
391976R91. Drop ship
99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
IH-1-119www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2656, 2706 (engine s/n 44822& up to s/n 71777)
Tractor: 560, 660 (engine s/n 44822 & up), 656,706
282 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
• Cupped Head Piston
• Sleeve Flange Dia. 4.165"
• Exhaust Valve Head Dia. 1-3/8"
• Thrust Bearing Flange 4"
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH282C
Valve, engine intake (6 used per engine)323774R1
Valve, engine exhaust (6 used per engine)612312C1
Spring, intake & exhaust valve (12 used per
engine)
315744R1
Guide, intake & exhaust valve (12 used per
engine)
278300R1
Key, intake & exhaust valve (24 used per engine)41339D
REPLACES Connecting Rod Bearing Kits1 kit used per engine
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
Thrust bearing flange 4" dia. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
1-367276R91, 1-367278R91, 1-376279R91, &
1-376285R91)
MBK221A
Main bearing kit, .010" (replaces 1-376670R91,
1-332276R91, 1-376673R91, & 1-376679R91)
MBK221A-010
Main bearing kit, .020" (replaces 1-376683R91,
1-332279R91, 1-376686R91 & 1-376692R91)
MBK221A-020
Oil Pump AssemblyREPLACES
Engine oil pump & screen assembly. Tractors:
560 (engine s/n 42218 & up), 660 (engine s/n
42218 & up), 706 (to engine s/n 51721), 2706
(to engine s/n 51721).
379138R91
IH-1-120www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2656, 2706 (engine s/n 44822& up to s/n 71777)
Tractor: 560, 660 (engine s/n 44822 & up), 656,706
282 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
• Cupped Head Piston
• Sleeve Flange Dia. 4.165"
• Exhaust Valve Head Dia. 1-3/8"
• Thrust Bearing Flange 4"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH1184A-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1184A-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH1184A
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. For 3-11/16" standard
bore
PK184
Piston ring set, 3-11/16" standard bore, 2 @ 1/8"
(top ring is half keystone), 1 @ 1/4" (1 used per
engine)
PRS174
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)306708R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK8334SB
Gasket set, headVGK8334SB
Gasket, oil pan369984R1
Speedi Sleeve, for front crankshaft seal.
391976R91. Drop ship
99237
Speedi Sleeve, for rear crankshaft seal.
538983R1. Drop ship
99395
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H221
IH-1-121www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2656, 2706Tractor: 656, 706282 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
Engine Serial Number: 71778 and up
• Cupped Head Piston
• Sleeve Flange Dia. 3.873"
• Exhaust Valve Head Dia. 1-3/8"
• Thrust Bearing Flange 4"
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH282C
Valve, engine intake (6 used per engine)323774R1
Valve, engine exhaust (6 used per engine)612312C1
Spring, intake & exhaust valve (12 used per
engine)
315744R1
Guide, intake & exhaust valve (12 used per
engine)
278300R1
Key, intake & exhaust valve (24 used per engine)41339D
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-367408R11)CRK221
Rod bearing kit, .002" (replaces 6-367632R11)CRK221-002
Rod bearing kit, .010" (replaces 6-376666R11)CRK221-010
Rod bearing kit, .020" (replaces 6-376668R11)CRK221-020
Main Bearing Kits
Thrust bearing flange 4" dia. 1 kit used per engine
REPLACES
Main bearing kit, standard (replaces
1-367276R91, 1-367278R91, 1-376279R91, &
1-376285R91)
MBK221A
Main bearing kit, .010" (replaces 1-376670R91,
1-332276R91, 1-376673R91, & 1-376679R91)
MBK221A-010
Main bearing kit, .020" (replaces 1-376683R91,
1-332279R91, 1-376686R91 & 1-376692R91)
MBK221A-020
IH-1-122www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2656, 2706Tractor: 656, 706282 CID 6 Cylinder Diesel
Standard Bore 3-11/16"
Engine Serial Number: 71778 and up
• Cupped Head Piston
• Sleeve Flange Dia. 3.873"
• Exhaust Valve Head Dia. 1-3/8"
• Thrust Bearing Flange 4"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH6310D-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK6310D-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH6310D
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
Sleeve & piston kit. Contains sleeves, sleeve
seals, pistons, rings, pins & retainers. 3-7/8"
standard bore.
PK6310D
Piston ring set, 3-7/8" standard bore. 1 @ 1/8" K,
1 @ 3/32", 1 @ 3/16" (1 used per engine)
PRS6310D
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)3132018R2
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
and sleeves, where required)
GK6310D
Gasket set, headHS6310D
Gasket set, lowerCS6310D
Gasket, oil pan3055987R3
Seal, crankshaft, front (package, with wear ring)3228133R93
Seal, crankshaft, rear3138701R91
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH358
Valve, engine intake (6 used per engine)3055055R2
Valve, engine exhaust (6 used per engine)3055056R2
Spring, intake & exhaust valve (12 used per
engine)
3055060R1
Guide, intake & exhaust valve (12 used per
engine)
3055022R2
Key, intake & exhaust valve (24 used per engine)3055057R91
IH-1-123www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2706, 2756Tractor: 686, 706, 756, Hydro 86310 CID 6 Cylinder Diesel
Standard Bore 3-7/8"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces
6-3055351R91)
CRK310D
Rod bearing kit, .010" (replaces 6-3056834R11)CRK310D-010
Rod bearing kit, .020" (replaces 6-3056879R11)CRK310D-020
Main Bearing Kits
With flanged thrust bearings. Round holes. 1 kit used per
engine
REPLACES
Main bearing kit, standard (replaces
6-3055130R21 & 1-3055129R21)
MBK310D
Main bearing kit, .010" (replaces 6-5056832R21
& 1-3056820R11)
MBK310D-010
Main bearing kit, .020" (replaces 6-3056877R21
& 1-3056875R11)
MBK310D-020
IH-1-124www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2706, 2756Tractor: 686, 706, 756, Hydro 86310 CID 6 Cylinder Diesel
Standard Bore 3-7/8"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKH358D-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK358D-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFH358D
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
Sleeve & piston kit. Contains sleeves, sleeve
seals, pistons, rings, pins & retainers. 3-7/8"
standard bore.
PK358D
Piston ring set, 3-7/8" standard bore. 1 @ 1/8" K,
1 @ 3/32", 1 @ 3/16" (1 used per engine)
PRS6310D
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)3132018R2
Gaskets & Gasket SetsREPLACES
Gasket, complete/overhaul (with crankshaft seals
and sleeves, where required)
GK6310D
Gasket set, headHS6310D
Gasket set, lowerCS6310D
Gasket, oil pan3055987R3
Seal, crankshaft, front (package, with wear ring)3228133R93
Seal, crankshaft, rear3138701R91
IH-1-125www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2826Tractor: 786, 826, 886 (chassis s/n 14472 & up),
3088 (to engine s/n 121247), 3288 (to engine s/n111090)
358 CID 6 Cylinder Diesel
Standard Bore 3-7/8"
• Cupped Head Piston
• Connecting rod bearing kits have undrilled bearings
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH358
Valve, engine intake (6 used per engine)3055055R2
Valve, engine exhaust (6 used per engine)3055056R2
Spring, intake & exhaust valve (12 used per
engine)
3055060R1
Guide, intake & exhaust valve (12 used per
engine)
3055022R2
Key, intake & exhaust valve (24 used per engine)3055057R91
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces
6-3055351R91)
CRK310D
Rod bearing kit, .010" (replaces 6-3056834R11)CRK310D-010
Rod bearing kit, .020" (replaces 6-3056879R11)CRK310D-020
Main Bearing Kits
With flanged thrust bearings. Round holes. 1 kit used per
engine
REPLACES
Main bearing kit, standard (replaces
6-3055130R21 & 1-3055129R21)
MBK310D
Main bearing kit, .010" (replaces 6-5056832R21
& 1-3056820R11)
MBK310D-010
Main bearing kit, .020" (replaces 6-3056877R21
& 1-3056875R11)
MBK310D-020
IH-1-126www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2826Tractor: 786, 826, 886 (chassis s/n 14472 & up),
3088 (to engine s/n 121247), 3288 (to engine s/n111090)
358 CID 6 Cylinder Diesel
Standard Bore 3-7/8"
• Cupped Head Piston
• Connecting rod bearing kits have undrilled bearings
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, valve grind gasket set,
oil pan gasket, front & rear crankshaft seals.
BEKH1186-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, valve grind gasket set,
oil pan gasket, front & rear crankshaft seals,
valves, springs, guides, and keys.
EOK1186-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind gasket set, and oil pan
gasket kit.
BIFH1186
Sleeve and Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
Cupped Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. For 4-1/8" standard bore.
PK186
Piston ring set, 4-1/8" standard bore, 1 @ 1/8" K,
1 @ 3/32", 1 @ 1/4" (1 used per engine)
PRS186
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)326562R1
Gaskets & Gasket SetsREPLACES
Gasket set. Contains valve grind gasket set, oil
pan gasket only, front & rear crankshaft seals.
GK7699
Gasket set, headVGK3835W
Gasket, oil panOPG345287R94
Seal, crankshaft, front (with wear sleeve)606780C93
Seal, crankshaft, rear (with wear sleeve)691631C91
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH361
Valve, engine intake (6 used per engine)343433R2
Valve, engine exhaust (6 used per engine)612313C1
62264VA
62265VA
Guide, intake & exhaust valve (12 used per
engine)
326505R3
Key, intake & exhaust valve (24 used per engine)32485D
IH-1-127www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2806Tractor: 806361 CID 6 Cylinder Diesel
Standard Bore 4-1/8"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H361
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-681314C2)CRK-H361D
Rod bearing kit, .010" (replaces 6-681315C2)CRK-H361D-010
Rod bearing kit, .020" (replaces 6-687382C2)CRK-H361D-020
Main Bearing Kits
With flanged thrust bearings. Round holes. 1 kit used per
engine
REPLACES
Main bearing kit, standard (replaces
1-328771R91, 1-328777R91, & 5-328774R91)
MBK-H361D
Main bearing kit, .010" (replaces 1-341545R91,
1-341551R91, & 5-341548R91)
MBK-H361D-010
Main bearing kit, .020" (replaces 1-341554R91,
1-341560R91, & 5-341557R91)
MBK-H361D-020
IH-1-128www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 2806Tractor: 806361 CID 6 Cylinder Diesel
Standard Bore 4-1/8"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, valve grind gasket set,
oil pan gasket, front & rear crankshaft seals.
BEKH1286-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, valve grind gasket set,
oil pan gasket, front & rear crankshaft seals,
valves, springs, guides, and keys.
EOK1286-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind gasket set, and oil pan
gasket kit.
BIFH1286
Sleeve and Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
Cupped Head Piston
Sleeve & piston kit. Contains sleeves, pistons,
rings, pins & retainers. For 4-1/8" standard bore.
PK286
Piston ring set, 4-1/8" standard bore, 1 @ 1/8" K,
1 @ 3/32", 1 @ 1/4" (1 used per engine)
PRS186
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)326562R1
Gaskets & Gasket SetsREPLACES
Gasket set. Contains valve grind gasket set, oil
pan gasket only, front & rear crankshaft seals.
GK7699
Gasket set, headVGK3835W
Gasket, oil panOPG345287R94
Seal, crankshaft, front (with wear sleeve)606780C93
Seal, crankshaft, rear (with wear sleeve)691631C91
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH361
Valve, engine intake (6 used per engine)343433R2
Valve, engine exhaust (6 used per engine)612313C1
62264VA
62265VA
Guide, intake & exhaust valve (12 used per
engine)
326505R3
Key, intake & exhaust valve (24 used per engine)32485D
IH-1-129www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 21206Tractor: 1206361 CID 6 Cylinder Turbocharged Diesel
Standard Bore 4-1/8"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H361
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-681314C2)CRK-H361D
Rod bearing kit, .010" (replaces 6-681315C2)CRK-H361D-010
Rod bearing kit, .020" (replaces 6-687382C2)CRK-H361D-020
Main Bearing Kits
With flanged thrust bearings. Round holes. 1 kit used per
engine
REPLACES
Main bearing kit, standard (replaces
1-328771R91, 1-328777R91, & 5-328774R91)
MBK-H361D
Main bearing kit, .010" (replaces 1-341545R91,
1-341551R91, & 5-341548R91)
MBK-H361D-010
Main bearing kit, .020" (replaces 1-341554R91,
1-341560R91, & 5-341557R91)
MBK-H361D-020
IH-1-130www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Industrial Tractor: 21206Tractor: 1206361 CID 6 Cylinder Turbocharged Diesel
Standard Bore 4-1/8"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
kit with crankshaft seals.
BEKH1187-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1187-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, oil pan gasket kit.
BIFH1187
Sleeve and Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
1-1/2" piston pin diameter
Cupped Head Piston
Sleeve & piston kit. Sleeves, pistons & rings,
pins & retainers. For 4.321" standard bore.
PK187
Piston ring set, 4.321" standard bore. 1 @ 1/8"
K, 1 @ 3/32", 1 @ 1/4" (1 used per engine)
PRS187
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)326562R1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK3857
Gasket set, headVGK3857
Gasket, oil panOPG345287R94
Seal, crankshaft, front (with wear sleeve)606780C93
Seal, crankshaft, rear (with wear sleeve)691631C91
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH361
Valve, engine intake (6 used per engine)343433R2
Valve, engine exhaust (6 used per engine)612313C1
62264VA
62265VA
Guide, intake & exhaust valve (12 used per
engine)
326505R3
Key, intake & exhaust valve (24 used per engine)32485D
IH-1-131www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Combine: 815 (with D407 engine)Industrial Tractor: 2856 (with D407 engine), 21206,
21256 (with DT407)Tractor: 856, 1026, 1256407 CID 6 Cylinder Diesel
Standard Bore 4.321"
• Cupped Head Piston, Piston Pin Dia. 1-1/2"
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H361
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-681314C2)CRK-H361D
Rod bearing kit, .010" (replaces 6-681315C2)CRK-H361D-010
Main bearing kit, .020" (replaces 1-341554R91,
1-341560R91, & 5-341557R91)
CRK-H361D-020
Main Bearing Kits
With flanged thrust bearings. Round holes. 1 kit used per
engine
REPLACES
Main bearing kit, standard (replaces
1-328771R91, 1-328777R91, & 5-328774R91)
MBK-H361D
Main bearing kit, .010" (replaces 1-341545R91,
1-341551R91, & 5-341548R91)
MBK-H361D-010
Main bearing kit, .020" (replaces 1-341554R91,
1-341560R91, & 5-341557R91)
MBK-H361D-020
IH-1-132www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Combine: 815 (with D407 engine)Industrial Tractor: 2856 (with D407 engine), 21206,
21256 (with DT407)Tractor: 856, 1026, 1256407 CID 6 Cylinder Diesel
Standard Bore 4.321"
• Cupped Head Piston, Piston Pin Dia. 1-1/2"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
kit with crankshaft seals.
BEKH1287-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOK1287-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, oil pan gasket kit.
BIFH1287
Sleeve and Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
1-5/8" piston pin diameter
Cupped Head Piston
Sleeve & piston kit. Sleeves, pistons & rings,
pins & retainers. For 4.321" standard bore.
PK287
Piston ring set, 4.321" standard bore. 1 @ 1/8"
K, 1 @ 3/32", 1 @ 1/4" (1 used per engine)
PRS187
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)670681C1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK3857
Gasket set, headVGK3857
Gasket, oil panOPG345287R94
Seal, crankshaft, front (with wear sleeve)606780C93
Seal, crankshaft, rear (with wear sleeve)691631C91
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH361
Valve, engine intake (6 used per engine)343433R2
Valve, engine exhaust (6 used per engine)612313C1
62264VA
62265VA
Guide, intake & exhaust valve (12 used per
engine)
326505R3
Key, intake & exhaust valve (24 used per engine)32485D
IH-1-133www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Combine: 915Industrial Tractor: 21456Tractor: 1456407 CID 6 Cylinder Turbocharged Diesel
Standard Bore 4.321"
• Cupped Head Piston, Piston Pin Dia. 1-5/8"
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Camshaft bearing kit (4 bearings)CBK-H361
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-681314C2)CRK-H361D
Rod bearing kit, .010" (replaces 6-681315C2)CRK-H361D-010
Rod bearing kit, .020" (replaces 6-687382C2)CRK-H361D-020
Main Bearing Kits
With flanged thrust bearings. Round holes. 1 kit used per
engine
REPLACES
Main bearing kit, standard (replaces
1-328771R91, 1-328777R91, & 5-328774R91)
MBK-H361D
Main bearing kit, .010" (replaces 1-341545R91,
1-341551R91, & 5-341548R91)
MBK-H361D-010
Main bearing kit, .020" (replaces 1-341554R91,
1-341560R91, & 5-341557R91)
MBK-H361D-020
IH-1-134www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Combine: 915Industrial Tractor: 21456Tractor: 1456407 CID 6 Cylinder Turbocharged Diesel
Standard Bore 4.321"
• Cupped Head Piston, Piston Pin Dia. 1-5/8"
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKHD414-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOKD414-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFHD414
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
Cupped Head Piston
Sleeve & piston kit. Contains sleeves, sleeve
seals, pistons, rings, pins & retainers. For 4.3"
standard bore.
PK-D414
Sleeve (6 used per engine)682720C1
Piston ring set, 4.3" standard bore. 1 @ 1/8" K,
1 @ 3/32", 1 @ 1/4" (1 used per engine)
PRSD414
Sleeve O-ring kit. Contains three o-rings.680086C1
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)675006C1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK414
Gasket set, headHS414
Gasket set, lowerCS414
Gasket, oil pan671827C1
Seal, crankshaft, front (with wear sleeve)690437C91
Seal, crankshaft, rear (with wear sleeve)691631C91
Cam BearingsREPLACES
Bearing kit, camshaft (4 bearings)CBK-H414
IH-1-135www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Combine: 815Tractor: 966414 CID 6 Cylinder Diesel
Standard Bore 4.3"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH414
Valve, engine intake (6 used per engine)675046C2
Valve, engine exhaust (6 used per engine)676865C2
Spring, intake & exhaust valve (12 used per
engine)
682064C1
Guide, intake & exhaust valve (12 used per
engine)
675439C1
Key, intake & exhaust valve (24 used per engine)41339D
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-681314C2)CRK-H361D
Rod bearing kit, .010" (replaces 6-681315C2)CRK-H361D-010
Rod bearing kit, .020" (replaces 6-687382C2)CRK-H361D-020
Main Bearing Kits
With flanged thrust bearings. Round holes. 1 kit used per
engine
REPLACES
Main bearing kit, standard (replaces
6-684570C92, & 1-684579C92)
MBK414
Main bearing kit, .010" (replaces 6-684573C92,
& 1-684582C92)
MBK414-010
Main bearing kit, .020" (replaces 6-687391C92,
& 1-687394C92)
MBK414-020
IH-1-136www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Combine: 815Tractor: 966414 CID 6 Cylinder Diesel
Standard Bore 4.3"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKHDT414-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOKDT414-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFHDT414
Sleeve and Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
Sleeve & piston kit. Contains sleeves, sleeve
seals, pistons, rings, pins & retainers. For 4.3"
standard bore.
PK-DT414
Sleeve (6 used per engine)682720C1
Piston ring set, 4.3" standard bore. 2 @ 1/8" K,
1 @ 1/4". Can be used as a replacement for
687429C91 ring set (6 used per engine)
684256C91
Sleeve O-ring kit. Contains three o-rings.680086C1
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)675006C1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK414
Gasket set, headHS414
Gasket set, lowerCS414
Gasket, oil pan671827C1
Seal, crankshaft, front (with wear sleeve)690437C91
Seal, crankshaft, rear (with wear sleeve)691631C91
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH414
Valve, engine intake (6 used per engine)675046C2
Valve, engine exhaust (6 used per engine)676865C2
Spring, intake & exhaust valve (12 used per
engine)
682064C1
Guide, intake & exhaust valve (12 used per
engine)
675439C1
Key, intake & exhaust valve (24 used per engine)41339D
IH-1-137www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Combine: 915Tractor: 1066, 1086414 CID 6 Cylinder Turbocharged Diesel
Standard Bore 4.3"
• Cupped Head Piston
• Piston pin 1-5/8" dia.
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Bearing kit, camshaft (4 bearings)CBK-H414
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-681314C2)CRK-H361D
Rod bearing kit, .010" (replaces 6-681315C2)CRK-H361D-010
Rod bearing kit, .020" (replaces 6-687382C2)CRK-H361D-020
Main Bearing Kits
With flanged thrust bearings. Round holes. 1 kit used per
engine
REPLACES
Main bearing kit, standard (replaces
6-684570C92, & 1-684579C92)
MBK414
Main bearing kit, .010" (replaces 6-684573C92,
& 1-684582C92)
MBK414-010
Main bearing kit, .020" (replaces 6-687391C92,
& 1-687394C92)
MBK414-020
IH-1-138www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Combine: 915Tractor: 1066, 1086414 CID 6 Cylinder Turbocharged Diesel
Standard Bore 4.3"
• Cupped Head Piston
• Piston pin 1-5/8" dia.
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKHDT436-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOKDT436-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFHDT436
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
1-5/8" piston pin diameter
Cupped Head Piston
Sleeve & piston kit. Contains sleeves, sleeve
seals, pistons, rings, pins & retainers. For 4.3"
standard bore.
PK-DT436
Sleeve (6 used per engine)682720C1
Piston ring set, 4.3" standard bore. 2 @ 1/8" K,
1 @ 1/4". Can be used as a replacement for
687429C91 ring set (6 used per engine)
684256C91
Sleeve O-ring kit. Contains three o-rings.680086C1
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)675006C1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK414
Gasket set, headHS414
Gasket set, lowerCS414
Gasket, oil pan671827C1
Seal, crankshaft, front (with wear sleeve)690437C91
Seal, crankshaft, rear (with wear sleeve)691631C91
IH-1-139www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Combine: 1460, 1480Tractor: 1466, 1486, 1566, 1586, 3388, 4166, 4186,
5088, 6388436 CID 6 Cylinder Turbocharged Diesel
Standard Bore 4.3"
• Cupped Head Piston
• Piston pin 1-5/8" dia.
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH414
Valve, engine intake (6 used per engine)675046C2
Valve, engine exhaust (6 used per engine)676865C2
Spring, intake & exhaust valve (12 used per
engine)
682064C1
Guide, intake & exhaust valve (12 used per
engine)
675439C1
Key, intake & exhaust valve (24 used per engine)41339D
Cam BearingsREPLACES
Bearing kit, camshaft (4 bearings)CBK-H414
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-681314C2)CRK-H361D
Rod bearing kit, .010" (replaces 6-681315C2)CRK-H361D-010
Rod bearing kit, .020" (replaces 6-687382C2)CRK-H361D-020
Main Bearing Kits
With flanged thrust bearings. Round holes. 1 kit used per
engine
REPLACES
Main bearing kit, standard (replaces
6-684570C92, & 1-684579C92)
MBK414
Main bearing kit, .010" (replaces 6-684573C92,
& 1-684582C92)
MBK414-010
Main bearing kit, .020" (replaces 6-687391C92,
& 1-687394C92)
MBK414-020
IH-1-140www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Combine: 1460, 1480Tractor: 1466, 1486, 1566, 1586, 3388, 4166, 4186,
5088, 6388436 CID 6 Cylinder Turbocharged Diesel
Standard Bore 4.3"
• Cupped Head Piston
• Piston pin 1-5/8" dia.
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKHDT466-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOKDT466-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFHDT466
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
Cupped Head Piston
Sleeve & piston kit. Contains sleeves, sleeve
seals, pistons, rings, pins & retainers. For 4.3"
standard bore.
PK-DT466
Sleeve (6 used per engine)682720C1
Piston ring set, 4.3" standard bore. 2 @ 1/8" K,
1 @ 1/4". Can be used as a replacement for
687429C91 ring set (6 used per engine)
684256C91
Sleeve O-ring kit. Contains three o-rings.680086C1
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)675006C1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK414
Gasket set, headHS414
Gasket set, lowerCS414
Gasket, oil pan671827C1
Seal, crankshaft, front (with wear sleeve)690437C91
Seal, crankshaft, rear (with wear sleeve)691631C91
IH-1-141www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 4366, 4386 (to engine s/n 74999)466 CID 6 Cylinder Turbocharged Diesel
Standard Bore 4.3"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH414
Valve, engine intake (6 used per engine)675046C2
Valve, engine exhaust (6 used per engine)676865C2
Spring, intake & exhaust valve (12 used per
engine)
682064C1
Guide, intake & exhaust valve (12 used per
engine)
675439C1
Key, intake & exhaust valve (24 used per engine)41339D
Cam BearingsREPLACES
Bearing kit, camshaft (4 bearings)CBK-H414
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-681314C2)CRK-H361D
Rod bearing kit, .010" (replaces 6-681315C2)CRK-H361D-010
Rod bearing kit, .020" (replaces 6-687382C2)CRK-H361D-020
Main Bearing Kits
With flanged thrust bearings. Round holes. 1 kit used per
engine
REPLACES
Main bearing kit, standard (replaces
6-684570C92, & 1-684579C92)
MBK414
Main bearing kit, .010" (replaces 6-684573C92,
& 1-684582C92)
MBK414-010
Main bearing kit, .020" (replaces 6-687391C92,
& 1-687394C92)
MBK414-020
IH-1-142www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Tractor: 4366, 4386 (to engine s/n 74999)466 CID 6 Cylinder Turbocharged Diesel
Standard Bore 4.3"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
TRU-POWER Engine KitsREPLACES
Basic engine kit. Contains sleeves, pistons,
rings, pins, pin bushings, and overhaul gasket
set with crankshaft seals.
BEKHDT466B-LCB
Engine overhaul kit. Contains sleeves, pistons,
rings, pins, pin bushings, overhaul gasket set
with crankshaft seals, valves, springs, guides,
and keys.
EOKDT466B-LCB
Basic in-frame kit. Contains sleeves, pistons,
rings, pins, valve grind set, and oil pan gasket
kit.
BIFHDT466B
Sleeve & Piston Kit
Complete for 6 cylinders (1 used per engine)
REPLACES
Sleeve & piston kit. Contains sleeves, sleeve
seals, pistons, rings, pins & retainers. For 4.3"
standard bore.
PK-DT466B
Sleeve (6 used per engine)682720C1
Piston ring set, 4.3" standard bore. 2 @ 1/8" K,
1 @ 1/4". Can be used as a replacement for
687429C91 ring set (6 used per engine)
684256C91
Sleeve O-ring kit. Contains three o-rings.680086C1
Piston Pin BushingsREPLACES
Bushing, piston pin (6 used per engine)675006C1
Gaskets & Gasket SetsREPLACES
Gasket set, complete/overhaul (with crankshaft
seals)
GK414
Gasket set, headHS414
Gasket set, lowerCS414
Gasket, oil pan671827C1
Seal, crankshaft, front (with wear sleeve)690437C91
Seal, crankshaft, rear (with wear sleeve)691631C91
Valves & Valve PartsREPLACES
Valve overhaul kit. Contains intake & exhaust
valves, springs, guides, valve keys.
VOKH414
Valve, engine intake (6 used per engine)675046C2
Valve, engine exhaust (6 used per engine)676865C2
Spring, intake & exhaust valve (12 used per
engine)
682064C1
Guide, intake & exhaust valve (12 used per
engine)
675439C1
Key, intake & exhaust valve (24 used per engine)41339D
IH-1-143www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Combine: 1470, 1480Tractor: 3588, 3788, 4386 (engine s/n 77300 & up),
5288, 5488, 6588, 6788, 7288, 7488466 CID 6 Cylinder Turbocharged Diesel
Standard Bore 4.3"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
Cam BearingsREPLACES
Bearing kit, camshaft (4 bearings)CBK-H414
Connecting Rod Bearing Kits
1 kit used per engine
REPLACES
Rod bearing kit, standard (replaces 6-681314C2)CRK-H361D
Rod bearing kit, .010" (replaces 6-681315C2)CRK-H361D-010
Rod bearing kit, .020" (replaces 6-687382C2)CRK-H361D-020
Main Bearing Kits
With flanged thrust bearings. Round holes. 1 kit used per
engine
REPLACES
Main bearing kit, standard (replaces
6-684570C92, & 1-684579C92)
MBK414
Main bearing kit, .010" (replaces 6-684573C92,
& 1-684582C92)
MBK414-010
Main bearing kit, .020" (replaces 6-687391C92,
& 1-687394C92)
MBK414-020
IH-1-144www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
Combine: 1470, 1480Tractor: 3588, 3788, 4386 (engine s/n 77300 & up),
5288, 5488, 6588, 6788, 7288, 7488466 CID 6 Cylinder Turbocharged Diesel
Standard Bore 4.3"
• Cupped Head Piston
1ENGINES
Replacement parts to fit
I.H.C.
Crankshaft PulleyREPLACES
Pulley, for crankshaft. Tractors: A, B, C.6502DC
Crankshaft GearREPLACES
Crankshaft gear. Tractors: Gas / LP: A, AV, B,
BN, C, Super A, Super AV, Super A1, Super AV1,
100, 130, 140, 200, 230, 240, 330, 340, 404,
424, 444, 504, 2404, 2424, 2444, 2504, 3444,
3514, T5, T340, 500 Crawlers. (33 TEETH).
46870DA
Cylinder HeadREPLACES
Cylinder head for Cub & Cub Lo-Boy with C60
gas engine.
355691R2
Camshaft GearREPLACES
Camshaft gear, for gas powered tractors: M,
Super M, 6, Super W6, 400, W400, 450, W450.
6760DB
Flywheel Assembly with Ring
Gear
REPLACES
NEW flywheel assembly with ring gear. 12"
diameter. Tractors: 574, 584, 585, 595, 684,
685, 695, 784, Hydro 84, 3230, 4210.
1808412C92
NEW, flywheel assembly with ring gear. 12"
diameter. Tractors: 806, 856, 1026. Diesel only
341603R31
NEW flywheel assembly with ring gear. 14"
diameter. For tractors: 1066, 1086, 1466, 1486,
1586, 4166, 3688, 6388.
672215C91
IH-1-145www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
1ENGINES
Replacement parts to fit
I.H.C.
Carburetor Repair KitsComplete repair kits contain all parts necessary for major carburetor overhaul. Basic repair kits contain throttle shaft, float valve, float lever pin
and gaskets for minor carburetor overhaul. “VITON” float valves are standard in kits with -V- suffix, optional in other kits. When ordering Viton,
simply add -V- to kit stock no. Kits marked (*) are not available with “Viton”.
REPLACES
Gasket SetBasic Repair
Kit
Tractor Manufacture
Carb Numbers
Carb Manufacture
Numbers
Carb
Manufacture
Complete
Repair Kit
Complete
Repair Kit
Application
BK7V24707DA, 29953DAZENC507VF12, F146496, 6699, 6817ZENC506AF20, F30, W30
CGK22BK8V8808ZENC508VA, BCGK22BK9V52499D9752ZENC509VA, B, Super A, AVCGK22BK9AV352376R9210514AZENC509AVA, B, Super A, AVCGK22BBK9BV355485R9111115ZENC509BVSuper A, Super CCGK10BK10V45108DB45108DBIHCC510VH, HV, 4 (distillate)CGK10BK10V50981DA50981DAIHCC510HVH, HV, 4CGK11BK12V358065R91358065R91IHCC510SVSuper HCGK11BK11VTHR Body 6513DX47387DBIHCC511VM, MV, 6 (distillate)CGK11BK12VTHR Body 8867DX47387DBIHCC512VM, MV, 6 (distillate)CGK11BK11VTHR Body 6513DX50983DBIHCC513VM, MV, 6CGK11BK12VTHR Body 8867DX50983DBIHCC514VM, MV, 6CGK11BK12V356948R92356948R92IHCC514SVSuper M, MTACGK11BK12V52814D, 15D, 60329DA52814D, 15D, 60329DAIHCC515VW9, WR9
BK123V366462R91,385608R91
12122/68X7, 12911/68X7ZEN130, 140
CGK11BK12V361525R92361525R92IHC300, 350, 400, 450CGK16BK16V381984R91381984R91IHC560
BK17V379813R93,534933R91
379813R93, 534933R91IHC660
BK1863349C9163349C91IHCCub (prior to s/n 312389)BK19V71523C9113794/68YY7ZENCub engine s/n 312390 & upBK200V76769R1UT27015CARTSuper A (s/n 255418 & up)BK27V69401DTSX157Marvel
ScheblerC527VA, B, Super A
BK311TSX744 & TSX748M-S200, 230, 240, 330, 340BK318TSX939, TSX984SL, &
TSX985SLM-S454, 464, 574, 674, 2400A,
2400B, 2500A, 2500B.Combines: 101, 103
BK320TSX857M-S504 *Viton not availibleBK17V379813R93,
534933R91379813R93, 534933R91IHCCombines: 403, 404, 453,
503, 715
IH-2-146www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
REPLACES Carburetor Tune-up KitCarburetor tune-up kit
contains: valve & seat,
idle adjusting needle, and
necessary gaskets, seals,
bushings, plugs, washers,
float pin, and instructions
for carburetor repair.
Used In A Wide Range Of
Other OEM Equipment
Tune-up kit, for Zenith carburetors used in
various IHC equipment using Zenith production
numbers: 13406, 13465, 13588.
Will also service the following carburetormodels used in a wide range of other OEMequipment
K2136
Zenith Production Number
11535 13038 13348 13624
11994 13048 13383 13636
12032 13108 13406 13677
12241 13109 13419 13689
12420 13115 13433 13762
12548 13116 13434 13795
12804 13118 13435 13831
12805 13119 13465 13844
12851 13157 13467 13875
12885 13178 13538 13881
12886 13226 13546 13993
12912 13236 13572 13956
12913 13316 13588 12675
13025 13337 13597 13762
13026 13338 13612
Tune-up kit, for Zenith carburetors used in
various IHC equipment using Zenith production
numbers: 12115, 12122, 12123, 12225, 12285,
12911, 13028, 13056, 13542, 13781, 13794.
Will also sercie the following carburetormodels used in a wide range of other OEMequipment
K2112
Zenith Production Numbers
12098 12522 13324 13720
12108 12544 13371 13727
12115 12566 13379 13733
12122 12567 13386 13735
12123 12512 13397 13769
12225 12654 13405 13781
12253 12658 13422 13794
12262 12690 13423 13800
12285 12699 13468 13803
12319 12775 13469 13819
12325 12911 13471 13822
12331 13007 13484 13843
12340 13028 13541 13873
12341 13047 13542 13876
12342 13053 13549 13877
12384 13056 13556 13878
12385 13105 13565 13879
12386 13206 13653 13880
12389 13210 13694 13895
12449 13276 13705 14002
12492 13292 13713 14017
12493 13309 13719 14544
IH-2-147www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Tune-up kit, for Zenith carburetors used in
various IHC equipment using Zenith production
numbers: 12685, 12758, 12822, 13384, 13488,
13604, 13716.
Will also service the following carburetormodels used in a wide range of other OEMequipment
K2127
Zenith Production Number
OS820 12490 12922 13124 13390
10329 12498 12950 13125 13406
10940 12499 12960 13128 13419
11011 12501 12962 13129 13433
11012 12509 12974 13147 13434
11222 12523 12975 13150 13435
11258 12534 12991 13151 13462
11535 12551 12992 13152 13465
11580 12576 12998 13153 13467
11588 12592 13016 13154 13488
11705 12617 13025 13157 13489
11741 12625 13026 13160 13534
11892 12629 13037 13161 13538
11900 12648 13039 13163 13545
11929 12651 13041 13164 13546
11994 12656 13044 13165 13560
11996 12669 13048 13170 13572
11999 12680 13059 13178 13588
12032 12685 13061 13186 13597
12060 12701 13066 13198 13604
12212 12722 13067 13202 13608
12214 12727 13069 13212 13609
12232 12731 13071 13213 13610
12237 12758 13106 13226 13612
12241 12770 13108 13236 13624
12301 12771 13109 13294 13636
12217 12794 13111 13304 13677
12287 12795 13112 13316 13689
12318 12804 13113 13328 13716
12351 12805 13114 13337 13750
12396 12820 13115 13338 13770
12418 12822 13116 13348 13771
12420 12880 13117 13357 13783
12425 12885 13119 13358
12430 12886 13120 13359
12457 12912 13121 13373
12468 12913 13122 13383
12473 12920 13123 13384
Carburetor Lever And Shaft
Assembly
REPLACES
351845R11 Lever and shaft assembly.
Tractors: Cub & Cub Lo-Boy with
C-60 engine (prior to s/n 312389).
Used on carburetors 63349C91,
251234R94, 364579R91.
Carburetor AssemblyREPLACES
TSX-157 Carburetor assembly, new, for
C113 gas engine. Replacement
for Marvel-Schebler TSX157.
Tractors: A, Super A, B. Can
replace carburetors; 52499DB,
69401D, 352376R92,
354184R93, 355485R91,
373957R91. Service with BK27V
basic repair kit or C527V
complete repair kit.
Carburetor assembly, new,
Zenith, for C60 (engine s/n
312390 & up). Tractors: Cub,
Cub Lo-Boy. Replaces 70949C91,
405004R91.
71523C92
Carburetor assembly, Zenith, for
C123 gas engine. Tractors: 130,
140 (s/n 103557 & up), 230.
Balers: 56T, 56W, 57T, 57W.
Can also be used to replace
375560R91 on Tractors: Super
A-1, Super AV-1, C, Super C.
385608R91
Main Jet Adjusting Needle
Assembly
REPLACES
71-28 Main jet adjusting needle
assembly for Zenith carburetor
series 61 & 62, model numbers:
0-9747, 0-10441, 0-10522.
Tractors: A, AV, Supers A and
AV, B, BN, C, Super C.
Carburetor Float Valve
Assemblies
REPLACES
Viton-tipped float valve assembly, all wheel
tractors using IHC carburetors. Converts
47396DAX40 to Viton.
47396V
Float valve assembly, all wheel models using
IHC carburetors except CUB.
47396DAX40
Float Valve Assembly, for Cub tractor with carb.
63349C1.
251300R21
Float Valve Assembly. For Zenith carb. 9752,
8808, 10514A, 11115. Tractors: A, B, C, Supers
A & C. Repl. 380977R91-V.
380978R91-V
IH-2-148www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Carburetor FloatsREPLACES
251293R1 Float and Lever. Tractors: Cub,
Cub Lo-Boy. For International
carbs. 251234R94, 364579R91.
Float, for Zenith carburetors.
Tractors: Cub, Cub Lo-Boy, A,
AV, B, BN, Super A, Super AV,
Super C, 200, 230, 240, 330, 340,
404.
53783D
Float, for Marvel-Schebler small
bowl carburetors. Tractors: A,
Super A, B, 330, 404.
69919D
Float, for 1" updraft International
carburetor. Tractors: H, HV, O4,
OS4, W4.
45114DX
Float, for 1-1/4" or 1-3/8" updraft
International carburetors.
Tractors: Super H & HV, M, MV,
Super M & MTA, O6, OS6, W6,
Super W6 & W6TA, W9, WR9,
WR9S, 300, 350, 400, W400,
450, W450, 460, 560, 600, 606,
650, 660, 706, 2606, 2706.
47398DX
Float, for Marvel-Schebler larger
bowl carburetors. Tractors:
Hydro 70, Hydro 86, 454, 464,
504, 544, 574, 656, 666, 686,
2500A, 2500B. Combines: 105,
203. Windrowers: 210, 230, 275,
375. Carburetors TSX857,
TSX925, TSX927, TSX934SL,
TSX943, TSX961SL, TSX974SL,
TSX975SL.
381962R1
Throttle AssembliesREPLACES
351005R1 Throttle assembly. Governor
control assembly with lever.
Tractors: Cub, Cub Lo-Boy.
Vintage Iron™
Throttle assembly. Governor
control assembly with lever.
Tractors: Super A, 100, 130.
Vintage Iron™
350610R11
Throttle assembly. Governor
control assembly with lever.
Tractors: C, Super C, 200, 230.
Vintage Iron™
354742R11
Lever assembly is easily attached
with two bolts. Provides accurate
speed control setting.
Tractors: H, M.
FTL153
Throttle Control. Governor control
sector with pivot pin. Tractors:H & HV, Super H & HV, M & MV,
Super M & MV. Vintage Iron™
51351DBXA
Throttle and governor control
spring. 1.322" overall length, .085"
wire diameter, .925" OD.
Tractors: H, Super H, HV, Super
HV, M, Super M, MV, Super MV,
MTA. Vintage Iron™
51349D
Spring for FTL153.HGL5
Friction disc for FTL153. 3/8"
hole, 3" O.D., .062" thick.
TD153
IH-2-149www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Rubber throttle knob. Also fits
various hydro’s, forward and
reverses. 7/16" diameter hole, 2"
Long, 13/16" to 1-5/16" OD.
Tractors: 384, 454, 464, 544,
574, 656, 664, 666, 674, 686,
756, 766, 826, 856, 966, 1026,
1066, 1256, 1456, 1466, 1468,
1566, 1568, 2400, 2500, 2544,
2656, 2756, 2826, 2856, 4366,
4386 (4WD), 4568 (4WD), 4786
(4WD), Hydro 70, Hydro 86,
Hydro 100. Vintage Iron™
397931R2
Choke CablesREPLACES
Choke cable, 64" length. Tractors: 300, 350,
656, 666, 686, 706, 756, 826. Industrials: 2656,
2706, 2756, 2826.
363709R95
Choke cable, 71" length. Tractors: 460, 560,
660, 706, 756, 806, 826, 856, 2706, 2756, 2806,
2826, 2856.
374281R92
Choke cable, 31" length. Tractors: Cub 154
Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy.
529926R1
Choke cable, 69" length. Tractors: 330, 340,
460, 656, 766, 856, 966, 1066, 1466, 1468,
2656, 2856, Hydro 100.
374219R93
Flexible Fuel LinesREPLACES
Flexible Fuel Line. Fuel line is 19" long with 3/8"
inverted brass flare nut at each end. Tractors:Hydros 70 & 86; 100, Hydro 186, 766, 966, 1066,
1466, 1568.
FLM66
Flexible fuel line, Buna-N flex. Tractors: A, B,
C, Supers A & C, 100, 130, 200, 230. 20-1/2"
long.
FLA15
Flexible fuel line, Buna-N flex. Tractors: H, M,
Supers H & M, 300, 350, 400. 30" long.
FLM16
Flexible fuel line, Buna-N flex. Tractors: 460,
560, 706, 806; most 6 cyl. gas models. 43" long.
FLM41
Fuel LinesREPLACES
Fuel line, strainer to carburetor with two nuts.
Tractors: A (s/n 501 to 41329), B (s/n 501 to
40192). Vintage Iron™
51498DX
Fuel line, strainer to carburetor with two nuts.
Tractors: Super A & AV (s/n 356001 & up),
Super C, 100, 200. Vintage Iron™
356355R11
Fuel line, strainer to carburetor with two nuts.
Tractors: Super A & AV (s/n 250001 to 355669),
C. Vintage Iron™
350623R11
Fuel line, strainer to carburetor with two nuts.
Tractors: H & HV (s/n 50866 & up). VintageIron™
58366DX
Fuel line, gas tank to strainer with two nuts.
Tractors: H & HV (s/n 50866 & up). VintageIron™
58367DAX
Fuel line, strainer to carburetor with two nuts.
Tractors: M, MV (s/n FBK24215 & up), Super
M & MV. Vintage Iron™
60684DX
Fuel line, strainer to carburetor with two nuts.
Tractors: 300, 350. Vintage Iron™361494R11
Fuel line, strainer to carburetor with two nuts.
For tractors with 18 gallon fuel capacity.
Tractors: 400, W400, 450, W450. VintageIron™
362558R11
Fuel line, strainer to carburetor with two nuts
for tractors with 21-1/2 gallon fuel capacity.
Tractors: 400, W400, 450, W450. VintageIron™
365339R1
Nut, fuel pipe coupling 1/2"-20 hi-duty tube
fitting, 5/16" O.D. Tubing used on IHC and
Farmalls. Manufactured to restoration standards.
Vintage Iron™
29899D
IH-2-150www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Diesel Fuel FiltersREPLACES
259479R92 Filter diesel fuel, cartridge type,
final. Tractors: MD, Super MD,
ODS6, WD6, WD9, Super WD9,
400, W400, 450, W450, 600, 650.
Fuel filter, cartridge type, final.
Tractors: 330, 340, 460, 504,
560, 606, 656, 660, 706, 806,
2504, 2606, 2656, 2706, 2806.
304101R91
Element, diesel fuel, cartridge
type, primary. Tractors: 330,
340, 460, 560, 606, 656, 660,
706, 806, 2606, 2656, 2706,
2806.
306353R91
Element, diesel fuel, CAV.
Tractors: Hydro 84 (prior to s/n
120520), 384, B141, 424, 444,
484, (prior to s/n 376419), 584
(prior to s/n 318609), 684 (prior
to s/n 667678), 784, 884, 2424,
2444, 3414, 3514. Element no.
CAV 7111/296.
3044506R93
Original C.A.V. fuel filter element,
external body type. Sold by single
filter, Packaged 10 per box. Can
replace 3044506R93.
CAV7111/296
Glass Fuel BowlsREPLACES
3144478R1 Fuel bowl, glass, 3-5/8" dia., .350"
dia. screw hole, for diesel
engines. Tractors with D179engine: 484 to eng. s/n 376419,
final filter in 454, 464, 2400A.
Tractors with D206 engine: 584
to eng. s/n 318209. Tractorswith D239 engine: 574 to eng.
s/n 103204, 664, 674 to eng. s/n
473984, 684 to eng. s/n 667678.
Tractors with D246 engine:Hydro 84 to eng. s/n 120520, 784
to eng. s/n 120520.
CAV type fuel bowl. 3-5/8" O.D.,
11/16" I.D. screw hole. Used with
diesel engines D179, D&DT239,
D310 & D358. Tractors: Hydro
84, 464, 484 (s/n 376420 & up),
574, 584, (s/n 318210 & up), 674,
684, 784, 884. Combine: 105.
Windrowers: 275, 375.
3132197R1
Fuel Sediment Bowls & PartsREPLACES
61782C91 Fuel strainer assembly, for
gasoline engines. Tractors: Cub
& Cub Lo-Boy, A, B, Supers A,
AV, A1, AV1; C, Super C, 100,
130, 140, 340, 404, 454, 460 Int.,
464, 504, 574, 606, 656 Int., 674,
2400A, 2500A, 2404, 2504, 2606,
2656 Int.; Windrowers: 201, 210,
230, 275 (s/n 1579 & up), 375 (s/n
201 & up), 4000, 5000, 5500.
Replaces 38465D, 355142R91,
369988R91.
Replacement 2" O.D. screen, 1/4" diameter
center hole for 61782C91.
49923D
Replacement gasket for bowl, 2" O.D.. Fits
61782C91.
360679R1
Bowl, 2" O.D., 1.280" long. Fits 61782C91.357958R1
Bail and nut assembly. Fits 61782C91.49947DX
Fuel strainer assembly, used on
gasoline engines. Tractors: H,
HV, M, Super M & M-TA, O4,
OS4, W4, 460, 560, 600, 650,
656, 660, 706, 756, 766, 806,
826, 856. Replaces 358245R91.
370832R91
Deep glass bowl, 2-1/8" O.D.,
2.370" long. Fits 370832R91.
357957R1
Bowl gasket, 2-1/8" O.D. Fits 370832R91.355888R2
Screen, 2-1/8" O.D., 7/16" diameter center hole.
Fits 370832R91.
13194D
Large bail and nut assembly for deep bowl. Fits
370832R91.
17564D
Sediment bowl assembly.
Includes horizontal inlet and
outlet with 1/8" x 1/8" female pip
threads. Tractors: 424, 444,
2424, 2444. Fits following diesel
models with auxiliary fuel tank
656, 706, 756, 806, 826, 856,
1026, 1066, 1206, 1256, 1456,
1466, 1566, Hydro 100.
Combines: 915 (up to s/n 8000).
Vintage Iron™
614421R91
IH-2-151www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Fuel PumpsREPLACES
708294R93 Pump, fuel, for diesel engines
BD144D, BD154D. Tractors:
B275, B276, 354, 364, 384, B414,
434, 2300, 3414, 3444.
Fuel Tank Cap & PartsREPLACES
23995DC Cap, fuel tank, vented style, for
gas or diesel. Tractors: Cub &
Cub Lo-Boy, A, Super A, B, C,
Super C, H, Super H, M, Super
M, 04, W4, Super W4, 06, W6,
Super W6, W9, 100, 130, 140,
4156, 4166, 4168. Baler: 55, 56,
60, 70, 71. Combines: 101, 151,
181, 315, 403, 503, 615, 715,
815, 915. Windrowers: 161, 163.
Mounting pad, fuel tank.
Tractors: Super H, M, MD, Super
M & MTA, Super W6, W9, WD9,
Super WD9, Hydro 70, Hydro 86,
200, 230, 240, 300, 330, 340,
350, 400, 404, 424, 444, 450,
460, 504, 544, 560, 600, 606,
650, 656, 660, 664, 666, 686,
706, 756, 766, 826, 856, 966.
60671D
Cap, auxiliary gasoline tank filler
with gasket (1-3/4" diameter). For
all distillate or kerosene burning
engines. Tractors: H, HV, Super
H & HV, M, MD, MDV, Super M
& M-TA, Super MD & MDV, O4,
OS4, O6, OS6, ODS6, W4, W6,
WD6, Super W6 & WD6, W9,
WD9, WDR9, WR9, WR9S, Super
WD9, & WDR9, 240, 300, 350,
400, 450, 600, 650.
40756D
Auxiliary fuel cap, includes
gasket. 1-¾" ID, .350" height.
Tractors: F12, F14. Also fits the
following with distillate or starting
tanks for diesel: H, Super H, HV,
Super HV, I4, I6, ID6, M, Super
M, MD, Super MD, MV, MDV,
MTA, O4, OS4, O6, OS6, W4,
W6, Super W6TA, WD6, Super
WD6TA, Super WD9, WDR9,
200, 230, 240, 300, 350, 400,
W400, 450, W450, 600, 650.
Vintage Iron™
27556D
Cap. Can be used for auxiliary gas
tank cap, power steering
reservoir cap, oil filler cap and
engine oil cap. Tractors: M,
Super M, MTA, MV, Super MV,
MDV, Super MDV. VintageIron™
70800228
Fuel cap with gasket. Vented,
2-11/16" ID, 5/8" height. Top of
cap reads "Buy Clean Fuel, Keep
it Clean". Tractors: 100, 130,
200, 230, 300, 350, 400, 450,
600, 650, 10-20, 15-30, A, Super
A, B, C, Super C, H, Super H, HV,
M, Super M, MD, MV, MTA,
Super MTA, F12, F14, F20, F30,
W-30, Cub, All I series, all W
series, all O series. VintageIron™
23995DA
Fuel Tank WebbingREPLACES
FTW494 Fuel tank webbing. (Sold 3 foot
lengths). Black woven nylon type
material, .042" thick. Tractors:
Fits Allis Chalmers, Avery, Case,
Cockshutt, IH/Farmall, John
Deere, Massey Harris,
Minneapolis Moline and Oliver
models. Vintage Iron™
Fuel Tank Sending UnitREPLACES
84203050 Fuel tank sending unit. Tractors:
560 & 660 (BOTH WITH
STEWART WARNER FUEL
GAUGE ONLY) --- 544 Gas, 656,
666, 686, 706, 756, 766, 806,
826, 856, 966, 1026, 1066, 1206,
1256, 1456, 1466, 1468, 1566,
1568, --- Gas Models: 2544, 2656,
2706, 2756, 2806, 2826, 2856,
21026, 21206, 21256, 21456, ---
HYDROS: 70, 86, 100 Notes: 32
Ohm full to 244 Ohm empty.
Replaces 378427R91. VintageIron™
IH-2-152www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Air Cleaner CapsREPLACES
350750R91 Air cleaner cap. Fits outside pipe.
1-3/8" ID x 4-1/8" body diameter.
Tractors: Cub, Cub LoBoy, A,
AV, B, BN, Super A (to s/n
355669). Vintage Iron™
Air cleaner cap. Fits inside pipe.
1.25" OD, 3.06" body diameter.
Tractors: Cub, Cub Lo-Boy, A,
AV, B, BN, Super A (to s/n
355669). Vintage Iron™
350750R92
Air cleaner cap. For either
Donaldson or United Specialties
air cleaner with vertical air intake
thru hood. Fits outside pipe. 1.75"
ID, 4.25" body diameter.
Tractors: Super A (s/n 356001 &
up), Super A1, C, Super C, 100,
130, 140, 200, 230, 240, 340.
Vintage Iron™
361723R91
Air cleaner cap. Fits inside pipe. 1-5/8" OD, 4-1/4"
body diameter. Tractors: Super A (s/n 356001
& up) Super A1, C, Super C, 100, 130, 140, 200,
230, 240, 340. Vintage Iron™
351189R91IP
Air cleaner cap. Fits outside of pipe. 2" ID, 5.25"
body diameter. Tractors: H, Super H, W4, Super
W4, O4, OS4, I4, 300, 350. Vintage Iron™
355935R91
Air cleaner cap with flat wire. Fits inside pipe.
4-1/8" body diameter, 1-7/8" OD. Tractors: H,
Super H, W4, Super W4, O4, OS4, I4, 300, 350.
Vintage Iron™
353019R92
Air cleaner cap. Fits outside of
the pipe. 2-1/4" ID, 5-1/4" body
diameter. Tractors: M, MD, MV,
MDV, MTA, Super M, Super MD,
Super MTA, Super MV, Super
MDV, I6, W6, Super W6, T6,
WD6, 400, W400, 450, W450.
Vintage Iron™
353018R92
Air cleaner cap. Fits inside pipe.
2-1/8" OD, 5-¼" body diameter.
Tractors: M, MD, MV, MDV,
MTA, Super M, Super MD, Super
MTA, Super MV, Super MDV, I6,
W6, Super W6, T6, WD6, 400,
W400, 450, W450. VintageIron™
353018R91
Air Cleaner Change IndicatorREPLACES
536230R1 Air cleaner change indicator
gauge. Tractors: 766, 966, 1066,
1466, 1468, 1566, 1568, Hydro
100, 4366, 4386, 4568, 4586.
Vintage Iron™
Air Cleaner PartsREPLACES
Air cleaner oil cup. 4-¾" OD at lip, 3" height
4.450" ID. Tractors: Super A (s/n 356001 & up),
C, Super C, H, 50, 100, 130, 140, 200, 230, 520,
530. Vintage Iron™
352597R91
Air cleaner clamp. Fits Donaldson
air cleaner. Tractors: Super A (s/n
355601 & up), C, Super C, 100,
130, 140, 200, 230. VintageIron™
66357DA
Air Cleaner FilterREPLACES
Oil bath air cleaner filter element. Fits most oil
bath air cleaners to replace mesh in the existing
air cleaner. Tractors: Avery, Case, Cockshutt,
Ford, IH/Farmall, John Deere, Massey Ferguson,
Massey Harris, Oliver, Minneapolis Moline.
Vintage Iron™
OBAC422
Pre-Cleaner ScreenREPLACES
378724R91 Pre-Cleaner screen with clip and
two springs. 5-¼" x 19-3/8".
Tractors: 504, 544, 560, 606,
660. Vintage Iron™
IH-2-153www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Pre-Cleaner AssembliesREPLACES
Pre-cleaner assembly complete, glass dust bowl
assembly. 2" ID base, just like the original.
Tractors: H, Super H, HV, I4, O4, OS4, W4,
Super W4, 300, 350. Vintage Iron™
59095D
Pre-cleaner assembly complete, Glass dust bowl
assembly. 2-1/4" ID base, just like the original.
Tractors: M, MD, Super M, MTA, W6, WD6,
I6, O6, ID6, OS6, ODS6, Super WD6, 400,
W400, 450, W450. Vintage Iron™
59096D
Pre-cleaner assembly complete, glass dust bowl
assembly. 1-3/4" ID base, just like the original.
Tractors: Super A (s/n 356001 & up), Super A-1,
C, Super C, 100, 130, 140, 200, 230, 240, 340.
Vintage Iron™
335261R91
Pre-cleaner assembly complete, Glass dust bowl
assembly. 1-3/8" ID base, just like the original.
Tractors: A, Cub, B, Super A (to s/n 355669).
Vintage Iron™
356254R91
Fuel GaugesREPLACES
263791R92 Fuel pressure gauge. 0-80,
screw- N type chrome bezel. IHC
logo and part number on face.
Tractors: MD, MDV, Super MD,
MTA Series, WD6, ID6, ID9,
WD9, Super WD9; 400 DSL, 450
DSL, 600 DSL, 650 DSL. VintageIron™
Fuel gauge. Tractors: 766, 966,
1066, 1466, 1468, 1566, 1568,
4366, 4386, 4568, 4586, Hydro
100. Vintage Iron™
533992R1
Pre-Cleaner BowlsREPLACES
Pre-Cleaner Bowl, clear plastic. Tractors: M,
MD, WR9S, Super WD9; 400, 450, W400,
W450, 460, 504, 544 diesel, 560, 600, 606, 650,
660, 2504, 2544 diesel, 2606. Combines: 403
& 453 Hillside, 503, 615, 715. Can replace
Donaldson #PO2-0227.
365413R1
Bowl O.D. at top 7-1/4"A)
Cone I.D. at top 3-1/2"B)
Bowl side height 3"C)
Overall height 4-1/8"D)
Pre-Cleaner Bowl, clear plastic. Tractors: 1026,
1206, 1256, 1456, 21026, 21256 and 21456. Can
replace Donaldson bowl #PO1-6330.
Bowl O.D. at top 10-1/2"A)
Cone I.D. at top 5-9/16"B)
Bowl side height 3"C)
Overall height 4"D)
277377R1
Glass bowl for pre-cleaner assembly 59095D,
59096D. (Just like the original). Tractors: H,
Super H, HV, I4, O4, OS4, W4, Super W4, 300,
350, M, MD, Super M, MTA, W6, WD6, I6, O6,
ID6, OS6, ODS6, Super WD6, 400, W400, 450,
W450.
54082D
Glass bowl for pre-cleaner assembly 335261R91,
356254R91. (Just like the original).
Tractors: Super A (s/n 356001 & up), Super A-1,
C, Super C, 100. 130, 140, 200, 230, 240, 340,
A, Cub, B, Super A (up to s/n 355669).
64178D
Clear plastic pre-cleaner bowl. 5.5" top OD, 5"
bottom OD. Tractors: Super A, C, Super C, 100,
130, 140, 200, 230, 240, 300 Rowcrop, 330, 340,
350 Rowcrop, 404, 424, 444, 544, 2404, 2424,
2444, B-275.
363000R1
Pre cleaner cover. Includes brass nut. 7"
diameter. Tractors: Various models with 3" ID
pipe and 7" bowl.
3119337
Metal pre-cleaner base. Fits all Donaldson
pre-cleaners with 3" OD pipe. Tractors: All
models with 3” I.D. pipe and 7” bowl.
TP-AF3584R
Metal pre-screener without screen. Tractors:
504, 544, 560, 606, 660, 2504, 2544, 2606.
Combines: 175, 403, 503, 615.
TP-AR1789R
IH-2-154www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Glass dust jar. 2-5/8" OD thread, 3-1/8" tall.
Tractors: A, Super A, Super A-1, B, C, Super C,
20, 100, 130, 140, 230, 240, 340, Cub. VintageIron™
64187D
Oil Gauge CockREPLACES
1998TA Oil gauge cock for oil pan. For
tractors with 3/8" NPT thread.
Oil gauge valve for tractors with
3/8" NPT thread. For oil pan.
Original equipment style. VintageIron™
1998TAOE
Oil CapREPLACES
364901R91 Oil fill breather cap with clip and
copper filter element. "Oil"
stamped into top. 3-¼" tall. Fits
over 1-½" pipe. Tractors: A, AV,
Super AV, B, C, B275, B414, 200,
230, 354, 2300, 3414. VintageIron™
Engine Oil FiltersREPLACES
376373R91 Oil filter element, cartridge type
with gasket. For C60 gas engine.
Tractors: Cub, Cub Lo-Boy.
Oil Filter Element. 3-15/32" O.D.,
5-17/32" long. For gas engines:
C113, C123, C135, C146, C152,
C153, C164, C169, C175.
Tractors: A & AV (s/n 97398 &
up), Super A & AV, B & BN (s/n
97398 & up), C, Super C, H, HV
(s/n 121022 & up), Super H & HV,
4 & W4 (s/n 495 & up), Super
W4, 100, 130, 140, 200, 230,
240, 300, 330, 340, 350, 404,
424, 444, 504, 2404, 2424, 2444,
2504. Replaces 63855D,
355009R91, 360430R91.
376374R91
Oil Filter Element, cartridge type
with gasket. 3-1/2" O.D., 7-15/32"
long. For gas engines: C113,
C152, C248, C264. C281.
Tractors: A & AV (prior to s/n
97397), B & BN (prior to s/n
97397), H & HV (prior to s/n
121021), M & MV (s/n 59394 &
up), Super M & MTA, 4 & W4
(prior to s/n 4957), 6 & W6 (s/n
4253 & up), Super W6, 400,
W400, 450, W450. Replaces
63858D, 355010R91,
360431R91.
376375R91
Oil Filter Element, cartridge type
with gasket. 3-15/16" O.D., 7-1/4"
long. For gas engines C248,
C350. Tractors: M & MV (prior
to s/n 59393), 6 & W6 (prior to
s/n 4252), W9, 600, 650. For
diesel engines D248, D264,
D281, D335, D350. Tractors:
MD, Super MD, ODS6, WD6,
Super WD6, WD9, Super WD9,
400, 450, 600, 650. Replaces
63884D, 63885D, 257867R92,
360430R91.
376376R91
Oil Filter Element, cartridge type
with gasket. For gas engines
C221, C263, C291, C301.
Tractors: 460, 560, 606, 656,
660, 706, 756, 806, 826, 856,
2606, 2656, 2706, 2756, 2806,
2826, 2856. For diesel engines
D166, D188, D236, D282, D &
DT361, D & DT407. Tractors:
330, 340, 460, 504, 560, 606,
656, 660, 706, 806, 856, 1026,
1206, 1256, 1456, 2504, 2606,
2656, 2706, 2806, 2856, 21026,
21206, 21256, 21456.
Combines: 815, 915. Replaces
279994R91.
323827R91
Oil Filter Element, spin-on type.
Approx. dim., 3.75" ht., 3.85" O.D.
For gas engines C113, C123,
C135, C146, C153. Tractors: A
& AV (s/n 97398 & up), Super A
& AV, B, BN (s/n 97398 & up),
Super C, 100, 130, 140, 200, 230,
330, 340, 404, 424, 444, 504,
2404, 2424, 2444, 2504.
538836R1
IH-2-155www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Oil Filter Element, spin-on type.
Approx. dim., 5.37" ht, 3.68" O.D.
For gas engines C157, C175,
C200, C291. Tractors: Hydro 70,
Hydro 86, 454, 544, 574, 674,
666, 686, 766. For diesel engines
D179, D206, D236, D239, D246,
D310, D358. Tractors: Hydro 84,
Hydro 86, 454, 464, 474, 484,
544, 574, 584, 585, 664, 674,
684, 686, 706, 756, 784, 786,
826, 886, 2544, 2706, 2756,
3088, 3288. Replaces 398080R2,
528250R1.
3136046R93
Oil Filter Element, spin-on type.
Appox. dim. 7.17" ht., 3.69" O.D.
For diesel engines D282, D312,
D & DT414, D & Dt436, D &
DT466. Tractors: Hydro 70,
Hydro 86, Hydro 100, Hydro 186,
656, 666, 686, 966, 986, 1066,
1086, 1466, 1486, 1566, 1586,
2656, 3388, 3488, 3588, 3688,
3788, 4166, 4186, 4366, 4386,
5088, 5288, 5488, 6388, 6588,
6788, 7288, 7488. Combines:
815, 915, 1460, 1470, 1480. Not
for machines equipped with
model 85 cotton harvester.
Replaces 675616C91,
675617C91, 1871722M1.
A184775
Water PumpsREPLACES
3132676R93 Water pump with hub installed.
For diesel engines D310, D358.
Tractors: Hydro 86, 706, 756,
786, 826, 886 (s/n 14472 & up),
2076, 2826, 3088, 3288.
Combines: 715 (s/n 23001 & up),
1420. Cotton Harvesters: 1400.
Cotton Pickers: 782.
Water pump with hub installed.
For diesel engines: D179, D206,
D236, D246. Tractors: 454, 464,
484, 584, 574, 674, 684, 2500A,
Hydro 84, 784.
3136053R92
Water pump with pulley installed.
For gas engines C113, C123.
Tractors: Super A, C, Super A1,
Super C, 100, 130, 200, 230, 240
(prior to s/n 65000). Uses repair
kit 366146R91.
355760R93
Water pump with hub installed.
For gas engines C221, C263,
C291, C301. Tractors: Hydro 70,
Hydro 86, 460, 560, 606, 656,
660, 666, 686, 706, 756, 766,
806, 826, 856, 2606, 2656, 2706,
2756, 2806, 2826, 2856.
Combines: 205, 303, 315, 403,
453 Hillside, 615 (to engine s/n
99978), 715 (to engine s/n
14132). For diesel engines D166,
D188, D236, D282. Tractors:
340, 460, 504, 560, 606 (engine
s/n 12799 to 13949), 656, 660,
706, 2504, 2565, 2706.
Combines: 101, 151, 151
Hillside, 181, 315, 403, 615.
601816C92
Water pump with hub installed.
Heavy duty replacement with 8
vane impellar. Excellent where
low cooling capacity is a problem.
For diesel engines D312, D360,
D & DT414, D & DT436, D &
DT466. Tractors: Hydro 70,
Hydro 86, Hydro 100, Hydro 186,
666, 686, 766, 886 (to s/n 14471),
966, 986, 1066, 1086, 1466,
1486, 1566, 1586, 3388, 3488,
3588, 3688, 3788, 4166, 4186,
4366, 4386, 5088, 5288, 5488,
6388, 6588, 6788, 7288, 7488.
Combines: 453 (s/n 8001 & up),
815 (s/n 8001 & up), 915 (s/n
8001 & up), 1440, 1460, 1470,
1480. Replaces pumps
672644C95, 673623C91,
675806C2, 677415C93,
749908C91, 749909C91.
673162C93
Water pump with hub installed
on 1" O.D. shaft. The perfect
replacement for O.E.M. pump
with smaller 7/8" O.D. shaft. For
diesel engines D & DT361, D &
DT407. Tractors: 806, 1206,
2806, 21206, 856, 1026, 1256,
1456, 2856, 21026, 21256,
21456. Replaces pump
749551C91 with 7/8" shaft. Uses
repair kit 609459C93. Also for
pumps supplied by TISCO prior
to 2-83.
701335C92
"NEW" Water pump assembly
with gaskets (adjustable pulley).
Tractors: 276, 354, 364, 414,
434, 444, 2300, 3414, 3444.
Engines: BC144, BD144, BD154.
703820R95
IH-2-156www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
"NEW" Water pump assembly
with gaskets. Heavy-duty 8-vane
impeller. Tractors: 884, 885, 895,
995, 4230, 4240. Replaces
735099C91.
3132739R92
Water pump "NEW" assembly
with gaskets (adjustable pulley).
Tractors: H, HV, Super H& HV,
O4, OS4, W4.
54148DA
Water pump "NEW" assembly
with gaskets (adjustable pulley).
Tractors: M, MD, MDV, MV.
Super M & MTA, O6, OS6,
ODS6, W6, WD6, 400, 450.
353729R92
Water Pump Repair KitsREPLACES
366146R91 Repair kit, services water pump
355760R93, contains impeller,
shaft with bearing, seals and
gaskets. Same as WPK234.
Water Pump BearingsREPLACES
ST225B Ball bearing for water pumps.
Tractors: H, Super H, 4, Super
W4, 300, 350. 2 used per pump,
replaces ST225.
Fan AssembliesREPLACES
251427R91 Fan with hub and pulley
assembly. Tractors: Cub (s/n 501
to 165152). 4 blade fan. 12-7/8"
long, 3-1/2" diameter double
pulley.
Fan with hub and pulley
assembly, ball bearing type.
Tractors: A, B, C, Super A (prior
to s/n 317191), Super AV (prior to
s/n 317191). Can replace fan
70136D. 4 blade fan. 15-5/8" long,
3-3/4" & 3-1/4" diameter double
pulley.
701360R
Water Temperature GaugeREPLACES
UTG25 Temperature Gauge, heat
indicator for 2" mounting hole.
Complete assembly with bracket
& adaptor. Dial calibrated to 250°,
extra long 72" capillary line.
Water temperature gauge.
Designed like the original, circular
C/IHC logo and part number on
face. 14" lead. Tractors: A, AV,
Super A, Super AV, B, BN, H,
Super H, I4, I6, ID6, I9, ID9, M,
Super M, Super MD, Super MTA,
O4, OS4, O6, OS6, ODS6, TD6,
W4, W6, WD6, Super WD6, W9,
WD9, Super W9, Super WD9 (to
1946). Vintage Iron™
63783D
Water temperature gauge. IHC
logo and part number on face. 16"
Lead, IH logo. Temperature is
measured in 3 zones. Black face
with white lettering and colored
zones to gauge temperature.
Tractors: A, AV, Super A, Super
AV, B, BN, H, Super H, I4, I6, ID6,
I9, ID9, M, Super M, Super MD,
Super MTA, O4, OS4, O6, OS6,
ODS6, TD6, W4, W6, WD6,
Super WD6, W9, WD9, Super
W9, Super WD9, 100, 130, 140.
Vintage Iron™
67135D
Water temperature gauge. 72"
lead. IHC logo and part number
on face. Tractors: C, Super C,
200, 230, 240, 300, 330, 340 gas,
350, 400, 450, 460, 560, 660.
Vintage Iron™
393476R91
Gauge Cluster AssembliesREPLACES
1546480C1 Gauge cluster assembly, fuel &
temperature. Includes IH logo on
face. Tractors: Diesel - 544, 656,
706, 756, 806, 826, 856, 1026,
1206, 1256, 1456, 4166, 4186.
Replaces 382733R93,
396380R91, 397939R92. VintageIron™
Gauge cluster assembly, oil &
temperature. Tractors: Diesel -
766, 966, 1066, Hydro 100, 1466,
1468, 1566, 1568, 4366, 4386,
4568, 4586. Replaces 534057R2.
Vintage Iron™
1546481C1
IH-2-157www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
TachometersREPLACES
364393R91 Tachometer assembly. Includes
IH logo on face. Tractors: 400,
450, W400, W450 (gas & LP);
serviceable for 300, 350 Rowcrop
Gas, LP and Diesel (The RPM will
read right, The PTO & ground
speed is in a different location).
Vintage Iron™
Tachometer assembly. Includes
IH logo on face. Tractors: 460,
560 (Gas / Diesel). VintageIron™
383093R91
Tachometer assembly with
BLACK face. Includes IH logo on
face. Tractors: 706, 806, 1206,
2706, 2806, 21206. Black
background with white lettering.
Vintage Iron™
388588R91
Tachometer assembly with
WHITE face. Includes IH logo on
face. Tractors: 756, 766 Gas (up
to s/n 10934), 826, 856, 1256,
1456, 2756, 2856, 21256, 21456.
White background with black
lettering. Vintage Iron™
398095R91
Tachometer assembly with knob.
Tractors: 766 Diesel, Early 786,
Early 886, 966 (with gear drive),
986, 1066 (with gear drive), 1086,
1466 (with gear drive), Early
1486. Replaces 103151A1.
Vintage Iron™
67679C2
Tachometer assembly complete.
Tractors: Following with HYDRO
TRANSMISSION: 544, 656, 666,
826, 966, 1026, 1066, Hydro 70,
Hydro 86, Hydro 100 (Gas /
Diesel). Replaces 398957R1,
402033R1, 65324C1. VintageIron™
534055R1
Tachometer. IHC logo on face.
Tractors: I 300, I 350 Gas (Utility
models only). Vintage Iron™
363829R91
Tachometer, complete assembly.
IHC logo on face. Tractors: 340
Gas. Vintage Iron™
371243R92
Tachometer, complete assembly.
Clockwise rotation. Tractors:
424, 444, 2424, 2444 (gas only).
Vintage Iron™
388893R91
Tachometer, complete assembly.
Clockwise rotation 3.75" OD at
bezel, 3.3170" OD housing.
Tractors: 454, 464, 574 Hydro,
674, 484, 584, 684, 784, 884,
885, H84, 2400, 2500A Hydro
(Gas / Dsl, s/n 100001 & up).
Vintage Iron™
66455C1
Tachometer, complete assembly.
IHC logo on face. Single light hole
in rear. 4-1/4" diameter. Tractors:
544 Rowcrop, 656 Rowcrop (Gas
/ Diesel) - Gear drive tractors with
torque amplifier. Vintage Iron™
401841R91
Tachometer cable with metal
covering, 80". Tractors: Fits the
following with diesel engine: 666
(D310 engine), 766, 806, 856,
1026, 1206, 1256, 1456, 3088,
3288, 4166, 4186, 4366. VintageIron™
393328R93
RadiatorsREPLACES
351878R92 Radiator. Tractors: Cub, Cub
Lo-Boy. Includes mounting
gasket.
Radiator assembly. Tractors: A
(s/n 41330 & up), B (s/n 40193 &
up), Super A, AV, AV-1 (s/n 25001
to 355669).
Core Height: 15-7/8"
Core Width: 16"
Depth: 2", 3 row, 10 FPI
58124DBX
Radiator assembly. Tractors:
Super A, A1, AV, AV1 (s/n 356001
& up), Super C, 100, 130, 200,
230.
Core Height: 16"
Core Width: 16"
356356R94
Radiator assembly. Tractors:
140.
Core Height: 16"
Core Width: 16-3/4"
Filler neck: 3/4"
Outlet: 2"
369400R94
IH-2-158www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Radiator assembly. Tractors: C
Core Height: 16"
Core Width: 16"
Depth: 2-3/4", 4 row, 9 FPI
354875R93
Radiator assembly. Tractors: H,
HV, Super H & HV, O4, OS4, W4,
Super W4.
Core Height: 17-3/4"
Core Width: 16"
352628R92
Radiator assembly, pressure type,
less cap. Tractors: M, MD,
Supers M & MD.
*Note: a new heat indicator must
be installed when replacing an
early production non-pressure
type radiator with a pressure
type.
352629R92
Radiator assembly. 3 rows, 8 FPI. Inlet: 2",
Outlet: 2". Tractors: M, MD, Super M, Super
MD, Super MDV. Replaces 351798R92.
Core Height: 21-3/4"
Core Width: 18-3/4"
352629R92NR
Radiator assembly. Tractors:
Farmall 300, 350
Core Height: 18"
Core Width: 16"
Depth: 3", 3 row, 8 FPI
361704R93
Radiator assembly. Tractors:
Farmall 400, 450.
Core Height: 21-3/4"
Core Width: 18"
Depth: 2-3/4", 4 row, 8 FPI
361417R93
Radiator assembly, less cap.
Tractors: 460 Farmall, 560
Farmall (Gas or Diesel).
Core Height: 21-3/4"
Core Width: 18-5/8"
370414R94
Radiator assembly. Tractors: 544
gas, 666 Hydro (s/n 10522 & up),
706 gas (s/n 37237 & up), 756
gas, 766 gas
Core Height: 20-3/8"
Core Width: 19-1/8"
Depth: 3-1/4", 4 row, 8 FPI
65426C1
Radiator assembly HD. Tractors:
656, 706 (prior to s/n 37236), 756
gas, 766 gas
Core Height: 20-1/2"
Core Width: 19-3/4"
Depth: 3-1/4", 5 row, 9 FPI
378713R92
Radiator assembly. Tractors: 656
w/Hydro.
Core Height: 20-1/4"
Core Width: 19"
Depth: 3-1/4", 5 row, 8 FPI
396496R2
Radiator assembly. Tractors: 706
diesel (s/n 37237 & up), 756
diesel
Core Height: 20-3/8"
Core Width: 19"
Depth: 3-1/4", 5 row, 8 FPI
396325R91
Radiator assembly. Tractors: 766
diesel, 886, 966, 986, 1066,
1086, 1466, 1486, 1566, 1586,
Hydro 100, Hydro 186
Core Height: 24"
Core Width: 22-1/2"
Depth: 3-7/8", 6 row, 8 FPI
71611C1
Radiator assembly. Tractors:
806, 826 gas, 856, 1206, 1256.
Core Height: 23"
Core Width: 18-3/4"
Depth: 3-1/4", 5 row, 8 FPI
Replaces 391931R91
386860R91
Radiator assembly. Tractors:
3088, 3288, 3688 w/cab, 3488
w/Hydro & 1-1/2" PTO hole
Core Height: 26-1/4"
Core Width: 26-1/8"
Depth: 3-3/8", 5 row, 10 FPI
Replaces 146503C1, 146412C2
146405C1
Radiator assembly. Tractors:
3388, 3588, 3788, 6388, 6588,
6788.
Core Height: 25-3/4"
Core Width: 25"
Depth: 3-3/4", 6 row, 9 FPI
130814C3
Radiator assembly. Tractors:
5088, 5288, 5488 w/1-1/2" PTO
hole
Core Height: 30-1/2"
Core Width: 26"
Depth: 3-3/8", 5 row, 9 FPI.
146508C1
Radiator assembly. Combines:
715 diesel, 815, 915, 1440.
Core Height: 28-1/8"
Core Width: 24-3/4"
Depth: 4-1/8", 6 row, 6 FPI
55650C2
IH-2-159www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Radiator assembly. Combines:
Early 1680 (prior to s/n
JJC0045689).
Core Height: 37-1/2"
Core Width: 24-3/4"
Depth: 4-1/8", 7 row, 6 FPI
A189212
Radiator assembly. Combines:
1640, 1644 Axial Flow, 1680 (s/n
JJC0045689 & up), 1688 Axial
Flow, 2144 (s/n JJC0173150 &
up), 2166 (prior to s/n
JJC0180000).
Core Height: 32-1/2"
Core Width: 30-3/8"
Depth: 5-7/16", 7 row, 4 FPI
1547946C3
Radiator PadsREPLACES
378710R91 Radiator mounting pad. Tractors:
544, 656, 664, 666, 706, 756,
766, 786, 806, 826, 856, 886,
966, 986, 1026, 1066, 1086,
1206, 1256, 1456, 1466, 1468,
1486, 1566, 1568, 1586, 4100,
4166, 4186 (INDUSTRIALS
START WITH 2"). 4 Used per
tractor. Sold individually.
Radiator Side PanelREPLACES
3116780R1 Radiator side panel, right. Gray
primer, 13-¼" H x 13-¼"- tapering
to 9-½" W. Tractors: 574, 674,
2500A Series (No Louvers).
Vintage Iron™
Radiator Caps & PartsREPLACES
67448DDWL Pressure cap with lever.
Tractors: Super A, C, Super C,
H, Super H*; M & MD, Super M
& MD*, W4, Super W4*, O6,
W6, ODS6, Super W6 & WD6,
W9 & WD9*, Super W9 & WD9.
Vintage Iron™* Not for short filler neck
Pressure cap. Tractors: Super A,
C, Super C, H, Super H, M &
MD, Super M & MD, Super W4,
06, W6, ODS6, Super W6 &
WD6, W9 & WD9, Super W9 &
WD9.
67448DD
Pressure cap. Tractors: 100, 140,
200, 230, 300, 330, 350, 400,
450, B450, 460, 560, 600, 650,
660. Replaces 370871R91. Not
for short filler neck.
361705R91
Pressure cap. Tractors: Super H,
Super M & MD, Super W4,
Super W6 & WD6, Super W9&
WD9, 100, 0130, 140, 200, 230,
240, 300, 340, 350, 400, 404,
424, 444, 450, 460, 504, 560,
606, 660, 2424, 2444, 2504,
2606, 4100, 4156, 4166. For
short filler neck.
393229R91
Non-pressure radiator cap.
Tractors: Cub, Cub Lo-Boy.
400586R1
Radiator cap for unpressurized
radiators, includes gasket. 4-5/16"
ID, ½" height. Tractors: W30,
T-20 (must drill hole in cap).
Vintage Iron™
22785DA
Radiator cap for non pressurized
systems. Fits on inside of neck.
2.108" tab to tab, 2.806" ID cap.
Tractors: A, Super A, B, C, Early
H, I4, I9, M, O4, O6, W4, W6,
W9. Vintage Iron™
43983D
Rubber radiator pad. 1-1/2" O.D.,
1/2" I.D., 1/4" thick. Tractors:
Hydro 84, A, Super A & AV, B, C,
Super C, 100, 130, 140, 200, 230,
240, 404, 424, 444, 454, 464,
484, 574, 584, 674, 684, 784,
884.
47240D
IH-2-160www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Radiator Hose Kits
4 piece kits, inlet & outlet hoses
REPLACES
Radiator hose kit. Tractors: H, 4, Super W4I,
300 & 350 (not farmall). Hoses:(1) 1-1/4" I.D. x
2-1/4" L, (1) 1-3/4" I.D. x 3-1/2" L, (2) 1-1/2" I.D. x
2-3/8" L.
RHKH300
Radiator hose kit. Tractors: M (s/n 109445 &
up), Super M, 400 & 450 diesel. Hoses: (2) 1-3/4"
I.D. x 3-1/2" L, (1) 1-1/2" I.D. x 2-3/8" L.
RHKM400
Radiator HosesREPLACES
Upper Radiator Hose. Tractors: 140, 240, 404,
424 gas, 444 gas. (2" X 2-5/8")
369397R1
Lower Radiator Hose. Tractors: 140, 140 (with
Blackstone radiator), 240, 404, 424 gas, 444 gas
(with Blackstone radiator), upper and lower for
A, AV, B, BN.
20075DB
Upper Radiator Hose. For diesel engines.
Tractors: Hydro 84, 574, 584, 674, 684, 784,
884.
402207R1
Lower Radiator Hose. Tractors: 584 Diesel, 584,
674, 684, 784, 884.
402205R1
Lower Radiator Hose. For gas engines. Tractors:
460 Farmall, 560, 656, 660, 706 (prior to s/n
5274), 706 Farmall (prior to s/n 37237).
369922R1
Upper Radiator Hose. Tractors: 460 Farmall,
560.
369921R1
Upper Radiator Hose. Tractors: Hydro 100, 186,
966, 1066, 1086, 1466, 1486, 1566, 1586.
532680R1
Lower Radiator Hose. Tractors: Hydro 100, 186,
966, 1066, 1086, 1466, 1486, 1566, 1586.
532681R1
Lower Radiator Hose. For diesel engines.
Tractors: 806, 856, 1026, 1206, 1256, 1456.
380448R2
Radiator Hose Tower Clamps
Original-style hose clamps
REPLACES
Tower hose clamp, 1". Vintage Iron™357870R91-1
Tower hose clamp, 1-3/4". Vintage Iron™357870R91-134
Tower hose clamp, 2". Vintage Iron™357870R91-2
Tower hose clamp, 2-1/4". Vintage Iron™357870R91-214
Tower hose clamp, 2-1/2". Vintage Iron™357870R91-212
Tower hose clamp, 2-5/8". Vintage Iron™357870R91-258
Tower hose clamp, 2-3/4". Vintage Iron™357870R91-234
Tower hose clamp, 3". Vintage Iron™357870R91-3
Worm Drive Hose Clamps
-Stainless steel Standard Package - 10 per box
REPLACES
HOSE I.D.MAXIMUM
INCHES
MINIMUM
INCHES
Replaces
3/8", 5/16", 1/4"25/32"7/16"C6P
1/2", 3/8", 5/16"1"1/2"C8P
5/8", 1/2", 3/8"1-1/16"9/16"C10P
3/4", 5/8"1-1/4"11/16"C12P
1", 7/8", 3/4"1-1/2"13/16"C16P
1-1/4", 1"1-3/4"1-3/16"C20P
1-1/2", 1-1/4"2"1-1/16"C24P
1-3/4", 1-1/2", 1-1/4"2-1/4"1-5/16"C28P
2", 1-3/4", 1-1/2"2-1/2"1-9/16"C32P
2-1/4", 2", 1-3/4"2-3/4"1-13/16"C36P
2-1/2", 2-1/4", 2"3"2-1/16"C40P
2-3/4", 2-1/2", 2-1/4"3-1/4"2-5/16"C44P
3", 2-3/4", 2-1/2"3-1/2"2-9/16"C48P
3-1/4", 3"3-3/4"2-13/16"C52P
3-1/2", 3-1/4"4"3-1/16"C56P
4", 3-3/4", 3-1/2"4-1/2"3-5/16"C60P
IH-2-161www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Replacement Engine Heater
Cords
REPLACES
GE62S 3-wire replacement cord for
oblong receptacles. 60" long.
3-wire, 2-prong replacement cord,
60" long for rectangular
receptacles.
GE63P
REPLACES Lower Radiator Hose Engine
HeatersSimple installation. Cut
radiator hose per
directions & insert heater.
110-120 volt. Cords are
42" long.
Lower radiator hose engine heaters, for 1-1/4"
I.D. hose. 42" long. 375 watt. Replacement cord:
GEHCORD.
GEH125
Lower radiator hose engine heater for 1-1/2" I.D.
hose. 42" long cord. Replacement cord:
GEHCORD.
GEH150
Lower radiator hose engine heater for 1-3/4" I.D.
hose. 42" long cord. Replacement cord:
GEHCORD.
GEH175
Lower radiator hose engine heater, for 2" I.D
hose. 42" long cord. Replacement cord:
GEHCORD.
GEH200
Replacement cord for heaters GEH100, GEH125,
GEH150, GEH175 and GEH200. Cord length 42".
For heaters "Model D".
GEHCORD
Engine HeatersREPLACES
106725A1 Frost plug heater with cord. 600
watt, 120 volt. Locks securely
into engine block. 1-5/8" diameter
with o-ring seal. Replaces
407046R92. Fits gas engines:
C153, C221, C263, C301 and
diesel: D188, D166, D236, D282,
D361, D236, D282, D301.
Tractors: 340, 460, 504, 560,
606, 656, 660, 706, 806, 2504,
2806. Combines: 315, 403, 403
& 503 Hillside, 503, 615, 715.
Frost plug heater with cord. 1250
watt, 120 volt, 1.240" diameter.
Fits tractors and combines with
diesel engines. Cord is 72" long.
Fits diesel engines: D312, D360,
D & DT414, D & DT436, D &
DT466. Tractors: Hydro 70,
Hydro 86, Hydro 100, Hydro 186,
666, 686, 766, 886, 966, 986,
1066, 1086, 1466, 1486, 1566,
1586, 3388, 3488, 3588, 3688,
3788, 4166, 4186, 4366, 4386,
5088, 5288, 5488, 6388, 6588,
6788. Combines: 815, 915,
1440, 1460, 1470, 1480.
71151C91
REPLACES Tank Type HeatersWith built in thermostats
Plugs into any 110-120
volt receptacle. Cords are
50" long.
Tank type heater, 750 watt. With built in
thermostats. For use on 16-22 quart capacity
liquid cooled engines.
GE850
Tank type heater, 1000 watt. With built in
thermostats. For use on 23-30 quart capacity
liquid cooled engines.
GE1000
Tank type heater, 1500 watt. With built in
thermostats. For use on over 30 quart capacity
liquid cooled engines.
GE1500
2000 watt tank-type heater. Thermostatically
protected: opens at 190°F (88°C), closes at
151°F (66°C). Vertical installation only.
Heavy-duty 3-wire 5' attached cord. 5/8" inlet
and outlet. 2-3/4" x 8-1/2" (7cm x 21.6cm).
Replaceable element and thermostat.
GE2000
IH-2-162www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Tractor Belt Type
300 366781R1 Fan
350 366781R1 Fan
544 401128R2 Fan & alternator
664 401128R2 Fan & alternator
766 680613C91 Water pump & alternator
966 680613C91 Fan, alternator, & water pump
986 680613C91 Fan & alternator (w/ 21/32” belt TW & 65” belt OC)
1066 680613C91 Fan, alternator, & water pump
1086 680613C91 Fan & alternator
1466 680613C91 Fan, alternator, & water pump
1486 680613C91 Fan & alternator
1566 680613C91 Fan & alternator
1586 680613C91 Fan & alternator
3388 680613C91 Fan & alternator
3488 680613C91 Water pump & alternator
3588 680613C91 Fan & alternator
4100 120396X1 Water pump & alternator
4156 120396X1 Water pump & alternator
4166 680613C91 Water pump & alternator
4366 (to s/n 1499) 680613C91 Fan
4386 (to s/n 1499) 680613C91 Fan
4568 680613C91 Fan, water pump & alternator
4586 680613C91 Fan, water pump & alternator
4786 680613C91 Fan, water pump & alternator
5088 (w/o AC) 680613C91 Fan & alternator
5288 (w/o AC) 680613C91 Fan & alternator
Tractor Belt Type
5488 (w/o AC) 680613C91 Fan & alternator
6388 680613C91 Fan & alternator
6588 680613C91 Fan & alternator
6788 680613C91 Fan & alternator
7288 680613C91 Fan & alternator
A 366781R1 Water pump
AV 366781R1 Water pump
B 366781R1 Water pump
C 366781R1 Water pump
H 366781R1 Fan
HV 366781R1 Fan
Hydro 100 680613C91 Fan, alternator, & water pump
Hydro 186 680613C91 Fan & alternator
O-4 366781R1 Fan
OS-4 366781R1 Fan
Super A 366781R1 Water pump
Super A1 366781R1 Water pump
Super C 366781R1 Water pump
Super H 366781R1 Fan
Super HV 366781R1 Fan
W-4 366781R1 Fan
W-14 366781R1 Fan
Industrial
2544 401128R2 Fan & alternator
Belts
IH-2-163www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Oil Pressure GaugesREPLACES
536962R1 Gauge, oil pressure (no logo), 80
pound, fits 2" dia. hole. Tractors:
A, Super A, B, C, Super C, H, M,
4, 6, 9, Super 9, 100, 130, 140,
200, 230, 240, 300, 330, 340,
350, 400 (except diesels). Use for
3644664R92, 364665R92,
393488R91.
Gauge, oil pressure. Screw in
type with circle "C" IH logo.
Tractors: A, B, C (1939-1946).
Vintage Iron™
43987DB-A
Gauge, oil pressure. Screw in
type with "IH" logo. Tractors: A,
B, C, 100, 200, 230 (1947-1954).
Vintage Iron™
43987DB-B
Gauge, oil pressure (with IH logo).
With circle C IH logo. With
mounting studs and bracket.
Tractors: C, Super C, 200, 230
(1947-1954). Vintage Iron™
43987DB
Gauge, oil pressure (0 to 75 psi).
Tractors: Cub, Cub Lo-Boy,
Super A, AV, C, Super C, 100,
130, 140, 200, 230, 240, 300,
330, 340, 350, 400. VintageIron™
364665R91
Gauge, oil pressure (with IH logo).
Fits IHC and Farmall models.
Tractors: H, Super H, M, Super
M, Super MD, Super MTA, W,
Super W (1947-1954). VintageIron™
41934DB
Oil pressure gauge. Screw-in
type. Metal base, glass lens &
black face IHC with white letters.
Includes IH logo & part number.
1/8" NPT male thread. Tractors:
Early Cub (to 1954). VintageIron™
31041DB
Oil pressure gauge. 0 to 45 PSI.
Screw in type, chrome bezel. 1/8"
NPT male thread.
Tractors: Cub (1955 & up).
Vintage Iron™
393487R91
Oil pressure gauge. IHC logo and
part number on face. 0 – 75 PSI.
Chrome bezel with studs. 1/8"
NPT male thread. Tractors: 240,
340, 300 (Gas / Dsl), 330, 350
(Gas / Dsl), 400 (Gas / Dsl), 450
(Gas / Dsl), 460, 560, 600, 650,
660. Industrials: 3514, 3616, T5,
TD-5, T340, TD340, 500 Crawler,
3800, 3850. Vintage Iron™
362177R94
Intake & Exhaust ManifoldsREPLACES
251175R21 Intake/exhaust manifold, for C113
& C123 gas engines. Tractors:
A, Super A, B, C, Super C, 100,
200 , 230, 240.
Heavy duty intake/exhaust
manifold, includes gaskets and
outlet pipe. For gas engines.
Tractors: H, 4.
8033DCX
Heavy duty intake/exhaust
manifold, same as 8033dcx. Can
replace original manifold on gas
engines. Tractors: Super H,
Super W4, 300, 350.
362536R21
Intake/exhaust manifold, includes
outlet pipe, carburetor and
manifold gaskets. Heavy duty
replacement for gas engines.
Tractors: M, Super M, 6, 400,
W400, 450, W450.
362437R21
Exhaust manifold, for gas
powered engines. Tractors:
Hydro 70 & 86; 666, 686, 706,
756, 766, 806, 826, 856, 2706,
2756, 2826, 2856.
384290R21
Intake/exhaust manifold, for C200
gas engine with vertical exhaust.
Tractors: 544, 574, 674, 2500A,
500B, 2505B, 2510B, 2514B,
3500A. Replaces 398071R1.
Exhaust goes out, off center, not
on the end.
406046R1
IH-2-164www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Exhaust ElbowsREPLACES
675316C2 Exhaust elbow. Tractors: 1066,
1466, 1566, 4166, 4186, 4366,
4386.
Exhaust elbow. Tractors: 1026
Hydro, 1256, 1456.
670034C1
Exhaust elbow sleeve. Tractors:
1066, 1466, 1566, Some 88
Series. Use with exhaust elbow
675316C2.
675317C2
Exhaust elbow sleeve donut.
Tractors: 1066, 1466, 1566,
Some 88 Series. 2 Required per
sleeve --- Sold individually. Use
with exhaust elbow 675316C2.
702299C2
Exhaust ManifoldsREPLACES
• New manifolds
• Gaskets NOT included
Exhaust manifold (center section). Tractors:
1026 Hydro, 1256, 1456.
670813C91
Manifold GasketsREPLACES
Manifold gasket set. Contains two 1342802C1
(45197DD) gaskets. For engines C113, C123,
C135, C146, C153. Used with manifold
251175R21.
MS8797B
Manifold gasket set, contains two 1342802C1
gaskets. For engines C152, C164, C169, C175.
Used with manifolds 8033DCX and 362536R21.
MS8774B
Manifold gasket set. For engines C248, C264,
C281. Contains two 46173DC gaskets.
MS2620
IH-2-165www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Vertical Mufflers for Gas TractorsREPLACES
Exhaust
Weather
Cap
Outlet
Clamp
Inlet
Clamp
Body StyleDiameterOverall
Length
Outlet
O.D.
Inlet I.D.MufflerApplication
WC2MC150Round3-1/4"22"1-1/2"1-3/8"351436R92Cub, Cub Lo-BoyWC4MC200MC200Round4-1/4"29"2"1-15/16"360720R91A, AV, Super A, Super AV, B,
BN, C, Super A-1, Super AV-1,Super C, 100, 130, 140, 200,230, 240, 330, 340, 404, 2404Industrial
WC4MC200MC200Round4-1/4"18"2"1-15/16"360720TOBShort clearance muffler fortobacco or grove. Applicationsame as 360720R91
WC6MC250MC250Round5-1/2"29"2-1/2"2-3/8"350600R95H, HV, O4, OS4, W4, Super H,Super HV, Super W4
WC6MC250MC250Round6"29"2-1/2"2-3/8"350601R95300, 350, O6, OS6, W6WC6MC250MC250Round6"29"2-1/2"2-3/8"357288R92M, MV, Super M, Super MV,
Super W6, W6TA, 400, W400,450, W450
WC8MC300Round6"22"3"3-1/8"264116R92WD9, WDR9, Super WD9,Super WDR9, 600, 650
WC4MC200MC200Round5-1/2"27"2"1-15/16"403825R1424, 2424, 444, 504, 2444,2500, 2504, 3514, 3444
WC6MC250MC250Round6"29"2-1/2"2-3/8"370644R92450, 606, 2606, 656, 2656WC6MC250MC250Round6"29"2-1/2"2-3/8"370773R92560WC8MC300MC300Round5-1/2"34"3"2-15/16"384345R92706, 5706, 806, 2806WC8MC300MC300Round6"34"3"2-15/16"398511R1756, 2756, 856, 2856
IH-2-166www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
REPLACES Vertical Mufflers for Diesel Tractors
Exhaust
Weather
Cap
Outlet
Clamp
Inlet
Clamp
Body StyleDiameterOverall
Length
Outlet
O.D.
Inlet I.D.MufflerApplication
WC6MC250MC250Round6"29"2-1/2"2-3/8"357288R92M, MV, Super M, Super MV,Super W6, W6TA, 400,W400, 450, W450
WC6MC250MC250Round6"29"2-1/2"2-3/8"350601R95300, 350, O6, OS6, W6WC6MC250MC250Round6"29"2-1/2"2-3/8"350601R95-TP300, 350, O6, OS6, W6
economy versionWC8MC300Round6"22"3"3-1/8"264116R92WD9, WDR9, Super WD9,
Super WDR9, 600, 650WC6MC250MC250Round6"29"2-1/2"2-3/8"370644R92340, 504, 2504, 3514, 460WC4MC200MC200Round5-1/2"27"2"1-15/16"403825R1424, 444, 2424, 2444WC6MC250MC250Round6"29"2-1/2"2-3/8"370773R92560WC6MC250MC250Round5-1/2"34"2-1/2"2-3/8"384346R92706, 2706WC8MC300Round6"40"3"2-15/16"398512R2706, 756, 2706, 2756WC8MC300MC300Oval--42"3"2-15/16"530588R4Hydro 86, 686, 706, 756,
2706, 2756, 826, 2856WC8MC300Oval--50"3"3-3/16"534545R4766, 966, Hydro 100WC8MC300MC300Round5-1/2"34"3"2-15/16"384345R92806, 2606WC8MC300MC300Round6"34"3"2-15/16"398511R1856, 2856WC10MC350Oval--38"3-1/2"3-3/4"530577R31026, 1256, 1456, 21026,
21256, 21456WC10MC350Oval--44"3-1/2"3-3/4"534546R51066, 1466, 1566, 4366,
4386 (to s/n 2500)
IH-2-167www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Horizontal (Underslung) Mufflers
For Gas & Diesel Tractors
REPLACES
Exhaust
Weather
Cap
Outlet
Clamp
Inlet
Clamp
Body StyleDiameterOverall
Length
Outlet
O.D.
Inlet I.D.MufflerApplication
Round,Horizontal
1-1/2"12-1/2"1-3/8"2-3/4"361116R91Tractors: Cub, Cub Lo Boy.
WC4MC178MC178Round, Vertical4-1/2"22-1/2"2"1-7/8"371039R91544, 2544, 460, 606, 2606, 560, 656,660, 2656, 340, 504, 2504, 460, 606,2606, 544, 664, 2544, 560, 656, 660,2656
Oval,Horizontal
--15-1/2"3-1/4"3-5/8"103978C21086, 1486, 1586
Round,Horizontal
--22-1/2"1-3/4"1-5/8"365966R91300 (s/n 62493 & up), 350 (s/n 501 &up) w/C175 gas engine, 504 (s/n 3104& up) w/ C135 gas engine
Oval--34"3"2-15/16"530578R91Hydro 70, Hydro 86, 666, 686, 706, 766w/ C263 & C291 gas engines, 706w/D310 diesel engine, 806 w/ C301 gas& D361 diesel engines, 826, 856 w/C301 gas & D407 diesel engine
Round15"1-15/16"1-1/2"393840R91Tractors: Cub Cadets 102, 104, 105,106, 107, 122, 123, 125, 126, 127(using Kohler 10 & 12 hp 1 cyl. engines)
Muffler Clamps
Full 360° saddle clamps with nuts. O.D. designation refers
to pipe size.
REPLACES
PIPE O.D.Replaces
1-1/2"MC150
1-3/4"MC134
1-5/8"MC158
1-7/8"MC178
2"MC200
2-1/4"MC225
2-1/2"MC250
2-3/4"MC275
3"MC300
3-1/2"MC350
Muffler ClampsREPLACES
351437R1 Muffler clamp with hardware.
Tractors: Cub, Cub Lo-Boy, 100,
130, 140. Vintage Iron™
Clamp, muffler. Tractors: A, Super A & AV, B,
C, Super C, 100, 130, 140, 200, 230, 240, 340,
404, 424, 460, 504, 560, 606, 656, 660, 664.
Vintage Iron™
48889DA
Muffler clamp with hardware. Tractors: H & HV,
Super H & HV, M & MD, Super M & MD & MTA,
W4, W6, WD6, Super W6, 300, 330, 340, 350,
400, 450, 460, 504, 560, 606, 660, 706. VintageIron™
350602R1
IH-2-168www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Exhaust WeathercapsREPLACES
MAX. EXHAUST O.D.MIN. EXHAUST
O.D.
Replaces
1-3/16"1"WC0
1-7/16"1-1/4"WC1
1-11/16"1-1/2"WC2
1-15/16"1-3/4"WC3
2-3/16"2"WC4
2-7/16"2-1/4"WC5
2-11/16"2-1/2"WC6
2-15/16"2-3/4"WC7
3-3/16"3"WC8
3-7/16"3-1/4"WC9
3-11/16"3-1/2"WC10
3-15/16"3-3/4"WC11
4-3/16"4"WC12
4-7/16"4-1/4"WC13
4-11/16"4-1/2"WC14
5-3/16"5"WC15
Heat Baffle ShieldsREPLACES
531499R1 Heat baffle shield, rear, left side.
Bare metal, 19-¾" long x 6-¼" tall.
Made in the USA. Tractors: 766,
966, 1468, 1568. Vintage Iron™
Heat baffle shield, rear, right side.
Bare metal, 19-15/16" long x 6-¼"
wide. Made in the USA.
Tractors: 766, 966, 1468, 1568.
Vintage Iron™
531500R1
Heat baffle shield, rear, left side.
Bare metal, 19" L x 6-¼" W. Made
in the USA. Tractors: 1066,
1466, 1566, Hydro 100. VintageIron™
531507R1
Heat baffle shield, rear, right side.
Bare metal, 19" L x 6-¼" W.
Made in the USA.
Tractors: 1066, 1466, 1566,
Hydro 100. Vintage Iron™
402458R2
Heat baffle shield, rear, right side.
Bare metal, 19" L x 6-¼" W. Made
in the USA. Tractors: 1066,
1466, 1566, Hydro 100. VintageIron™
351508R1
IH-2-169www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
2ENGINE SYSTEMS
Replacement parts to fit
I.H.C.
Ignition Kits & PartsREPLACES
• Tune-up kit contains point set, condenser, rotor, gauge, and spark plugs
• Ignition kit with rotor contains point set, condenser, rotor, and gauge
• Ignition kit witout rotor contains point set, condenser, and gauge
Coil for
Electronic
Ignition
Electronic
Ignition Kit
Spark PlugsIgnition Kit
less Rotor
Ignition Kit
with Rotor
Tune Up
Kit
Application
EHDCEH4P6AL386ATK5BIATK5BIRIHTK1Battery ignition 4 cylinder with IH distributor thru1962: Cub, Cub Lo-Boy, A, AV, Super A, Super AV, EH4AL388IHTK1-HSuper A-1, Super AV-1, B, BN, C, Super C, H, HV,Super H, Super HV, M, MV, MD, MDV, Super M, SuperMTA, Super MD, Super MTAD, O4, OS4, W4, SuperW4, O6, OS6, W6, ODS6, WD6, Super W6, SuperW6TA, Super WD6, Super W6TAD, W9, 100, 130, 140,200, 230, 240, 300, 330, 340, 350, 400, 450.
EHDCEH6AL386ATK5BIATK5BIR6 cylinder with IH distributor 1951-1962: 460, 560,606, 660, 2606. AL388
EHDCEH4P6AL386ATK9BIATK9BIRIHTK24 cylinder with IH distributor 1963 & up: Cub, CubLo-Boy, 140, 340. EH4AL388
EHDCEH6AL386ATK9BIATK9BIRIHTK36 cylinder with IH distributor 1963 & up: Hydro 70,Hydro 86, 460, 560, 606, 660, 666, 686, 706, 756, 766,806, 826, 856, 2606, 2706, 2756, 2806, 2826, 2856.
AL388
EHDCED4CAL386ATK1DCATK1DCRMF-ITK-104 cylinder with Delco distributor with clip-held cap:A, AV, Super A, Super AV, B, BN, C, Super C, H, HV,Super H, Super HV, M, MD, Super M, Super MTA,Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super9, 354, B414.
EHDCED4SAL386ATK10DSATK10DSRMF-ITK-404 cylinder Delco distributor with screw-held cap:454, 464, 544, 574, 674.
IH-3-170www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
Ignition Parts
*use coil 396547R93 for 12V system if a resistor is not being used
REPLACES
Electronic
Ignition
Spark PlugCoilCapRotorCondenserPointsApplication
EH4P6AL386396546R93351693R92353896R91353903R92353172R91Battery ignition 4 cylinder with IH distributorthru 1962: Cub, Cub Lo-Boy, A, AV, Super A, EH4AL388Super AV, Super A-1, Super AV-1, B, BN, C,Super C, H, HV, Super H, Super HV, M, MV, MD,MDV, Super M, Super MTA, Super MD, SuperMTAD, O4, OS4, W4, Super W4, O6, OS6, W6,ODS6, WD6, Super W6, Super W6TA, SuperWD6, Super W6TAD, W9, 100, 130, 140, 200,230, 240, 300, 330, 340, 350, 400, 450.
EH6AL386396546R93368062R91353896R91353903R92353172R916 cylinder with IH distributor 1951-1962: 460,560, 606, 660, 2606. AL388
EH4P6AL386396546R93351693R92353896R91353903R92372951R914 cylinder with IH distributor 1963 & up: Cub,Cub Lo-Boy, 140, 340. EH4AL388
EH6AL386396546R93368062R91353896R91353903R92372951R916 cylinder with IH distributor 1963 & up: Hydro70, Hydro 86, 460, 560, 606, 660, 666, 686, 706, AL388756, 766, 806, 826, 856, 2606, 2706, 2756, 2806,2826, 2856.
ED4CAL386396546R93811735190559018697041882965VA4 cylinder with Delco distributor with clip-heldcap: A, AV, Super A, Super AV, B, BN, C, Super ED4CP6AL3881900119C, H, HV, Super H, Super HV, M, MD, Super M, ED4CP12Super MTA, Super MD, Super MDV, 4, Super 4,6, Super 6, 9, Super 9, 354, B414.
ED4SAL386396546R9319608331954566186970419545574 cylinder Delco distributor with screw-heldcap: 454, 464, 544, 574, 674. ED4SP12AL388
IH-3-171www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
Autolite Spark PlugsREPLACES
Champion Cross ReferencePlug typeTip typeHex sizeReachThread
diameter
Heat RangeReplaces
N12Y, N12YC, N13YNon-resistorPower13/16"3/4"(14mm)Medium HotAL65
ASL8, H8, H8J, RH8, H10,H10C, H10J, RH10, H11, H12,RH12
Non-resistorStandard13/16"7/16"(14mm)MediumAL216
J8, J8C, UJ8Non-resistorStandard13/16"3/8"(14mm)Medium HotAL295
D10, K13, D14, M14, RD14,K15J, D16, D16J, RD16,
ResistorStandard7/8"1/2"(18mm)Medium HotAL386
UD16, D21, D89D Replaces#376, BT8, 18-8, D16D23ResistorStandard7/8"1/2"(18mm)HotAL388
W10, W14, C16C, W18, W20Non-resistorStandard15/16"5/8"(18mm)ColdAL3076
RD15Y, D18, RD18YNon-resistorPower7/8"1/2"(18mm)Medium HotAL3116
Ignition CoilsREPLACES
385402R92 Coil, Ignition. 12 volt for Cub
Cadet lawn tractors using Kohler
or Briggs horizontal crank
engines.
High performance heavy-duty coil
for electronic ignition.
EHDC
Coil, Ignition. For 6 volt systems
with or without external
resistance. For 12 volt systems
with external resistance.
Replaces IH coils: 353874R91,
368839R91, 395330R91 & R92;
Delco coils: 1115084, 1115098,
1115407.
396546R93
Coil, Ignition. Internal Resistance.
For straight 12 volt systems
without series resistance.
Replaces IH coils 353875R91,
395331R91 & R92; Delco coils
1115022, 1115043.
396547R93
Distributor Drive ShaftREPLACES
Shaft, Distributor Drive. For battery ignition with
IH distributor. Tractors: Cub, Cub Lo-Boy, A,
Supers A, A-1, AV, AV-1, B, C, Super C, H, HV,
Supers H, HV, M, MD, Supers M, MD, 06, OS6,
W6, Supers W6, WD6, W9WD9, WR9, WDR9,
WR9S, Supers WD9, WDR9, 300, 330, 340, 350,
400, W400, 404, 450, W450, 504.
353934R11
F4 MagnetoREPLACES
71455C91 Condenser, for F4 magneto, H4
magneto and J4 magneto (s/n
81410). Repl. 373892R91.
Winding Coil, for F4 magneto and
H4 magneto; molded, hi-output.
2" wide, 3/4" hole, 2-3/16" OD.
Can replace 47439DA.
RW104
IH-3-172www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
H4 MagnetoREPLACES
Ignition kit. For models using H4 magneto. Can
use on same equipment as TISCO kit ATK28H4
or IH2. Kit contains rotor, condenser, points and
proper point gap gauge.
ATK28H4R
Point Set for H4 magneto. Can work with F4
magneto with modification.
353171R91
Condenser, for F4 magneto, H4 magneto and
J4 magneto (s/n 81410). Repl. 373892R91.
71455C91
Rotor for H4 magneto.47425DY
Cap for H4 magneto. 2-3/4" high.47413DYC
Coil cover with lead-out for H4 magneto.47449DAY
Gear, Distributor driven for H4 magneto.49420DX
Gasket Set, for H4 magneto.MGK103
Winding Coil, for F4 magneto and H4 magneto;
molded, hi-output. 2" wide, 3/4" hole, 2-3/16"
OD. Can replace 47439DA.
RW104
J4 MagnetoREPLACES
Point Set, 1951-1962. For distributors with a gap
of .020". Also fits J4 magneto.
353172R91
Condenser, for F4 magneto, H4 magneto and
J4 magneto (s/n 81410). Repl. 373892R91.
71455C91
Condenser, 1951-1962 distributor. Also fits J4
magneto (s/n 81411 & up).
353903R92
Distributor Cap, 4 cyl. models. 2-3/16" high. For
J4 magneto.
351693R92
Winding Coil, for J4 magneto. OEM no longer
supplies this number.
352355R91
Repair Parts For Battery
Ignition
REPLACES
Point Set, 1951-1962. For distributors with a gap
of .020". Also fits J4 magneto.
353172R91
Point Set, 1962 and later. For distributor with a
gap of .020".
372951R91
Condenser, 1951-1962 distributor. Also fits J4
magneto (s/n 81411 & up).
353903R92
Rotor, for IHC distributor.353896R91
Distributor Cap, 4 cyl. models. 2-3/16" high. For
J4 magneto.
351693R92
Distributor Cap, 6 cylinder IHC distributors.368062R91
Spark Plug Wire SetsREPLACES
Wire set, spark plug. Universal kit for all 4 cyl.
models. Replaces SWS259.
407487R1
Wire Set, Spark Plug. Universal kit for all 6
cyliner models with coil wire without ends.
SWS260
IH-3-173www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
Electronic Ignition KitsREPLACES
GroundVoltageDistributor
Housing
No.
Distributor
Make
Distributor
Part No.
CylindersTractor ModelReplaces
Negative12353898R11IH353893R914Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub185 Lo-Boy, A, AV, Super A & AV, B, BN, C,
EH4
Super C, H, HV, Super H & HV, M, MV, Super M& M-TA, Super MD & MDV, 4 Series, Super 4Series, 6 Series, Super 6 Series, 9 Series, Super9 Series, 100, 130, 140, 200, 230, 240, 300, 330,340, 350, 400, 404, 424, 444, 454, 504, 600, 650
Positive6353898R11IH353893R914Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub185 Lo-Boy, A, AV, Super A & AV, B, BN, C,
EH4P6
Super C, H, HV, Super H & HV, M, MV, Super M& M-TA, Super MD & MDV, 4 Series, Super 4Series, 6 Series, Super 6 Series, 9 Series, Super9 Series, 100, 130, 140, 200, 230, 240, 300, 330,340, 350, 400, 404, 424, 444, 454, 504, 600, 650
Negative12353898R11Delco18853684A, AV, Super A & AV, B, BN, C, Super C, H, HV,Super H & HV, M, MV, Super M & M-TA, Super
ED4C
MD & MDV, 4 Series, Super 4 Series, 6 Series,Super 6 Series, 9 Series, Super 9 Series, 354,B414
Positive6Delco18853684A, AV, Super A & AV, B, BN, C, Super C, H, HV,Super H & HV, M, MV, Super M & M-TA, Super
ED4CP6
MD & MDV, 4 Series, Super 4 Series, 6 Series,9 Series, Super 9 Series, 354, B414
Negative12353898R11Delco112489,1112697
6560, 656, 660, 666, 686, 706, 756, 766, 806, 826,856
ED6S
Negative12353898R11Prestolite107573C914Cub, Cub Lo-Boy, Cup 154 Lo-Boy, Cub 185Lo-Boy, Super A & AV, Super C, 100, 130, 140,200, 230, 240, 454, 454, 464, 544, 574, 674
EP4B
Negative12368051R11IH398157R91,393396R91,
6656, 660, 666, 686, 706, 756, 766, 806, 826, 856EH6
399596R91,399597R91
Negative12Prestolite68830C916Hydro 70, Hydro 86, 686, 706, 756, 766EP6B
IH-3-174www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
Key Ignition SwitchesREPLACES
Switch, Ignition. 6 prongs, includes 2 keys.
Tractors: Hydro 84, 354, 454, 464, 484, 574
(prior to s/n 114908), 584, 674, 684, 784, 884,
2300, 2400, 2500 (prior to s/n 114908).
529800R91
Key, Ignition. Replacement key for ignition
switch 529800R91. Replaces 3110259R1.
K962338
Ignition switch. Five spade terminals with
screws, .995" diameter threaded end. Includes
jam nut and two keys. Tractors: 300, 400,
W400. Vintage Iron™
361998R93
Push Button SwitchesREPLACES
Switch, Push Button Ignition. 12 volt. Used in a
number of applications such as a starter, horn
or glow plug switch. 1-1/8" O.D. stem. VintageIron™
393209R91
Switch, Monetary Push Button Ignition. Rubber
boot covers push button, 2 screw type terminals,
used extensively on I.H. equipment. Serves as
starting, horn or reverse lock out switch. Used
on various combines, windrowers, balers, cotton
pickers, hay conditioners and grain platforms.
Also used on tractors: 656, 2656, 4100, 4156,
4166, 4186. Vintage Iron™
366317R93
Starter Switches & SolenoidsREPLACES
593292C1 Switch, Manual Starter. Saddle
mount, 2 mounting holes .190"
I.D., 1-3/8" centers. Tractors:
Cub & Cub Lo-Boy, Supers A &
AV, C Super C, H, HV, Supers H
& HV, Supers M & MV, Supers
W6 & WD6, 100, 130, 140, 200,
230. Replaces Delco 1918405,
1932131.
Switch, Manual Starter. Base
mount for 7/8" hole. Tractors: M,
MD, 04, 0S4, W4, 06, 0S6, 0DS6,
W6, WD6. Replaces Delco 405C,
IH 64931H, 356913R91.
1996487
Solenoid, Starter Switch. 6 volt
for IHC & Farmalls. Replaces
Delco 1465. 3 terminals.
142364HA
Solenoid, Starter Switch. 12 volt
for IHC & Farmalls. Saddle
mount, 3 terminals.
DR1467
Starter Solenoids. Solenoid
Assembly. Services Delco
starters: 1113413, 1113440,
1113489, 1113684, 1113439.
Tractors: Hydro 100, 186, 966,
1026, 1066, 1206, 3088, 3288,
3388, Hydro 3488, 3588, 3688,
3788, 4366, 4386, 6388, 6588,
6788, 21026, 21206. Replaces
Delco solenoid 1115518.
1115541
IH-3-175www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
Solenoid Assembly. Services
Delco starters: 1107228,
1107229, 1107252, 1107275,
1107364, 1107543, 1107585,
1107720, 1107744, 1107854,
1107867, 1108323, 1108334,
1108343, 1108344, 1108394,
1108642, 1108691, 1109252,
1109360. Tractors: Hydro 70, 84,
86, 100, 404, 424, 444, 454, 460,
464, 504, 544, 560, 574, 606,
656, 660, 666, 674, 684, 686,
706, 756, 766, 826, 856, 966,
1066, 1466, 1468, 2400A, 2404,
2424, 2444, 2500A, 2504, 2544,
2606, 2656, 2706, 2756, 2826,
2856. Replaces Delco Solenoids:
1114281, 1114356, 1114358,
1114458, 1119923, 1119946. Can
replace 594185C1.
65478C1
Solenoid Assembly. Services
Delco starters: 1113034,
1113198, 1113685, 1113053,
1113201, 1113690, 1113176,
1113203, 1113197, 1113647.
Tractors: Hydro 70, 84, 86, 400,
450, 454, 544, 560, 574, 656,
660, 664, 666, 684, 706, 756,
766, 826, 856, 966, 1066, 1206,
1256, 1456D, 1466, 1468, 1566,
1568, 2400A, 2500A, 2544, 2656,
2706, 2756, 2826, 2856, 4166,
21206, 21256, 21456D. Replaces
Delco Solenoids: 1115510,
1115540, 1119778, 1119935.
Replaces IHC 585618C91.
65479C2
Solenoid Assembly. Services
Delco starters: 1113398,
1114439. Tractors: Hydro 186;
766, 786, 886, 966, 986, 1066,
1086, 1466, 1486, 1586, 3088,
3288, 3688, 4166, 4186.
Replaces Delco Solenoid
1115530.
121904C1
StartersREPLACES
Starter assembly, for 6 volt systems, 2 bolt
mount. Tractors: Super A & C, 100, 140, 200,
240. Can replace original Delco 1107067,
1107093 and TISCO starter 7820-EX. Button for
switch near rear of starter.
S14033
Starter assembly, for 6 volt systems. 2 bolt
mount. Tractors: H, M, Super H, Super M, 4
series. Can replace original Delco 1107448 and
TISCO starter 5218-EX. Threaded stud.
S14132
Starter assembly. Tractors: 385, 395, 484, 485,
495, 584, 585, 595, 684, 685, 695, 784, 884,
885, 895, 995. Long nose cone style. Replaces
Lucas 27508B.
537140R96
Starter. Combines: 1430D, 1440, 1460, 1470,
1480, 1482, 1620, 1640, 1660.
104211A1
Starter. Tractors: 230, F140, F240, Farmall,
H-M, Farmall H, Farmall M, Super H, Super M.
S14132
Starter, with button for starter mounted starter
switch. Tractors: A, B, C, H, HV, M, Super M,
MV, MD, Super MD, MDV, Super MDV, Super
M-TA.
104221A2
Starter. Tractors: H, M, Super H, Super M, 140,
230, 240. Threaded stud. Replaces Delco
1107448.
104219A2
IH-3-176www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
Starter Drives & PartsREPLACES
Starter Drive, Remanufactured. 10 teeth,
Positive Drive. Services Delco starters: 1107067,
1107444, 1108016, 1108173, 1107093,
1107448, 1108038, 1107169, 1108012,
1108096. Tractors: Super A, C, Super C, H, M,
Super M, 4, Super W4, Super W6, 100, 130,
140, 300, 330, 340, 350.
77695H
Starter Drive, Remanufactured. 10 teeth. Service
Delco starter 1107585. Tractors: 424, 444,
2424, 2444. Replaces Delco drive 1959500.
1846554
Starter Drive, New. 10 teeth. Service Delco
starters: 1107854, 1108343, 1108691, 1109360,
1108334, 1108344, 1109252, 1113201.
Tractors: Hydro 70, 86; 100, 504, 594, 656, 666,
686, 706, 756, 766, 826, 856, 966, 1066, 1466,
1468, 2504, 2544, 2656, 2706, 2756, 2826,
2856. Replaces Delco drives: 1851427, 1968705,
1970544.
1877347
Starter Drive, Remanufactured. 10 teeth. Service
Delco starters: 1108640, 1113176, 1113439,
1113647, 1108646, 1113197, 1113440,
1113684, 1113034, 1113398, 1113489,
1113685, 1113053. Tractors: Hydro 100, 186,
400, 450, 650, 660, 706, 756, 766, 786, 826,
856, 886, 966, 986, 1066, 1086, 1206, 1256,
1456D, 1466, 1468, 1486, 1566, 1568, 1586,
21206, 21256, 21456D, 2706, 2756, 2826, 2856,
3088, 3288, 3388, 3588, 3688, 3788, 4166,
4186, 6388, 6588, 6788. Replaces delco drive:
800965, 1933838, 1948877.
1877350
Starter Drive, Remanufactured. Heavy duty
replacement for 1877350. Ideal for diesel
powered tractors or tractors located in cold
weather climates. Use application listed for
1877350.
1651487C91
Starter Drive, Remanufactured. 10 teeth.
Services Delco starters: 1107867, 1113203,
1113690. Tractors: Hydro 84, 454, 464, 574,
674, 684, 2400A, 2500A. Replaces Delco drives
1941157, 1971707.
1877355
Starter Drive, Remanufactured. 9 teeth. Services
Delco starters: 1108323, 1107364. Tractors:
424, 444, 656, 2424, 2444, 2656. Replaces
Delco drives: 1952410, 1946220.
1892899
Starter Drive, Remanufactured. 11 teeth.
Services Delco starter 1108394. Tractors: 454,
464, 574, 674, 2400A, 2500A.
1932897
Starter Drive, Remanufactured. 9 teeth. Services
Delco starters: 1107228, 1107275, 1107720,
1108642, 1107229, 1107543, 1107744.
Tractors: 404, 460, 504, 560, 606, 656, 660,
706, 2404, 2504, 2606, 2656, 2706.
1939109
Starter Drive, Remanufactured. 10 teeth.
Services Delco starter 1107328. Tractors: 140.
1963643
Starter Drive, Remanufactured. 12 teeth.
Services Delco starter 1113198. Tractors: 544,
656, 664, 666, 2544, 2656.
1965788
Starter Drive, Remanufactured. 12 teeth. Not
positive drive. Services Delco starter 1108913.
Tractors: M, Super M. Replaces Delco drive
1883648.
356037R91
"Super Power" Starter Drive
“Super Power” starter drive assembly. Special gear
reduction on unit gives more power for hard to start tractors.
REPLACES
Starter Drive, New. 10 tooth. Can replace drive
on starters using 77695H. Use 2 bolts and tab
washers to attach spring 1860639 (not included)
and drive lug from your old starter drive.
SPD12
Starter Drive SpringREPLACES
Spring, Starter Drive. 7 coil. Main drive spring
for starter 77695H.
1860639
IH-3-177www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
Starter PartsREPLACES
1918322 Lever, pull rod starting switch.
Tractors: Cub, Cub Lo-Boy,
Super A & AV, C, Super C, H &
HV, Super H & HV, Super M &
MTA, Super W4, Super W6 &
WD6, 100, 130, 140, 200, 230.
Manufactured to restoration
standards.
Drive end bushing, .562" I.D.,
.752" O.D., .750" Length.
Services starter 1113176,
1113197, 1113198, 1113201,
1113203, 1113398, 1113439,
1113440, 1113489, 1113647,
1113684, 1113685, 1113690.
Replaces Delco bushing
1943628. 4 required.
1955994
Brush, .740" W, .740" L, .375"
thick, .200" hole. Services Delco
Starters: 1113034, 1113053,
1113176, 1113197, 1113198,
1113201, 1113203, 1113398,
1113439, 1113647, 1113685,
1113690. Replaces Delco
brushes 1906958, 1906987. 4
required.
1946484
Brush, .740" W, .620" L, .250"
thick, .200" hole. Services Delco
starters: 1108626, 1108640,
1108642, 1108646. Replaced
Delco brush 1886643. 4 required.
828448
Brush, .755" W, .625" L, .255"
thick, .160" hole. Services Delco
starters: 1107067, 1107093,
1107169, 1107228, 1107229,
1107275, 1107328, 1107364,
1107448, 1107720, 1107444,
1107744, 1108012, 1108016,
1108038, 1108096, 1108173,
1108323, 1108334, 1108343,
1108344, 1108394, 1109360.
Replaces Delco brushes 811553,
1906966. 4 required.
1906945
Starter Flywheel Ring GearsREPLACES
Gear, Flywheel Starter Ring. 104 teeth, 13-3/16"
O.D. 11-15/16" I.D. For gas engines. Tractors:
H, Super H, 4, Super W4, 300, 330, 340, 350.
45638DB
Gear, Flywheel Starter Ring. 90 teeth, 10-1/2"
I.D., 11-7/16" O.D. For gas engines. Tractors:
A, Super A, B, C, Super C, 100, 130, 140, 200,
240.
55755DB
Gear, Flywheel Starter Ring. 125 teeth. 14-7/16"
I.D., 15-13/16" O.D. For gas or diesel engines.
Tractors: M & MD, Super M & MD, O6, ODS6,
W6 & WD6, Super W6 & WD6, 400, W400, 450,
W450. For diesel engine in tractors: 560 & 660.
Replaces 46142DB.
266142R1
Voltage Regulator Conversion
Kit
REPLACES
Conversion kit, used with VR1813 and VR1814
regulators when replacing Delco cutouts
1116766, 1116807, 1116809, 1116816,
therefore modernizing generator system. For
application see regulator listing. "F" terminal on
regulator to "F" terminal on generator.
VRK1815
IH-3-178www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
External Voltage RegulatorsREPLACES
Regulator 12 volt, replaces Delco regulators
1118981 & 1118999. Tractors: Cub Cadet 70
& 100, Cub & Cub Lo-Boy, 460, 560. Flat mount,
4 terminal. Same as VR1817.
121577C1
Regulator, 6 volt, saddle mount, 4 terminal.
Replaces Delco cut outs 1116766 & 1116809
when used with conversion kit VRK1815.
Tractors: Cub, Cub Lo-Boy, A, Super A, B, C,
H, M.
VR1813
Regulator, 6 volt, replaces Delco cut out
1116807 & 1116816 when used with conversion
kit VRK1815. Tractors: MD, WD6, WD9. Flat
mount, 4 terminals.
VR1814
Regulator, 6 volt. Flat mount, 4 terminals.
Replaces Delco regulator 1119575. For tractors,
combines, pickers, and balers. Same as VR1814.
121578C1
Regulator, 12 volt. Flat mount, 4 terminals. For
tractors & combines prior to 1958. Same as
VR1817.
1118779
Regulator, 12 volt. Flat mount, 3 terminals.
Tractors: 404, 424, 2404, 2424.
1118897
Regulator, 12 volt. Flat mount, 3 terminals.
Replaces Delco regulator 1119000. For tractors
with generators. Tractors: 404, 424, 504, 606,
656, 706, 806, 2404, 2424, 2504, 2606, 2656,
2706, 2806.
121579C1
Regulator, 12 volt external, for alternators. Flat
mount, 4 terminals on end, 1 terminal on side.
Tractors: 766, 966, 1066, 1466. Combines:
403, Hill, 503. Replaces Delco 1119507.
65303C1
Regulator, 12 volt. Flat mount, 5 terminals. For
tractors with alternators. Tractors: 664, 706,
806, 1206, 2706, 2806, 21206.
1119515
REPLACES Voltage Regulators
Regulator, internal, heavy duty, replaces Delco
numbers 1116392 & 1116387. Tractors: Cub,
Cub Lo-Boy, Hydro 70, Hydro 86, Hydro 100,
140, 454, 464, 574, 666, 674, 686, 766, 966,
1066, 1466, 1468, 1566, 1568, 2400A, 2500A,
3088, 3288, 3388, 3588, 3688, 3788, 4166,
4186, 4366, 4386, 5088, 5288, 5488. Services
Delco alternators 1100578, 1102375, 1100583,
1100585, 1100587, 1100593, 1102920,
1102921, 1103160, 1103171, 1103183,
1103184, 1103971, 1105164, 1105538,
1107178, 1116387, 1116392, 1100593.
585624C1
Battery Box AssembliesREPLACES
51690D Battery hold down rubber plug,
short. Use with covers
51686DBX, 351336R91,
50937DX, 62519DX, 51713DXB.
Tractors: Cub, Cub Lo-Boy, A,
AV, B, BN, H, HV, Super H, HV,
M, MD, Super M, MTA; Super
MD, MDV, O4, OS4, W4, Super
W4, O6, OS6, ODS6, W6, WD6,
WDR6, Super W6, W9, WD9,
WR9, WR9S, Super WD9, 600,
650. Vintage Iron™
Battery box. Box comes primed.
Tractors: Cub, Cub Lo-Boy.
Vintage Iron
538609R2
Cover, battery box front. Cover
comes primed. Tractors: Cub,
Cub Lo-Boy. Vintage Iron™
351334R1
Cover assembly, battery box.
Cover comes painted. Tractors:
Cub (prior to s/n 22440), Cub
Lo-Boy (prior to s/n 18700).
Vintage Iron™
351336R91
Cover, battery box hold down.
Cover comes primed. Tractors:
A, AV, B. Vintage Iron™
50937DX
IH-3-179www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
Restoration-Quality Battery
Box Assemblies
REPLACES
50943DKT Battery box assembly, complete.
IH red powder coat finish. Inside
dimensions: 7-1/8" wide x 9" tall
x 9" long. Lid includes the metal
retainers, rubber bushings and
bolts on front and rear. RH clips
point straight down. LH clips
point forward and LH rear clips
point backward. Bolts down with
2 bolts. Tractors: A, B, BN.
Replaces 50937DX (lid), 50943D
(box only). Vintage Iron™
Battery box, complete. IH red
powder coat finish. Attaches to
tractor with 4 bolts. Inside
dimensions: 7-1/8" wide x 9" long
x 8.75" height. Tractors: C, Super
A (to s/n 348643), Super C (to s/n
176522). Replaces 350634R91.
Vintage Iron™
350634R91KT
Battery box assembly, complete.
4-piece, includes top, LH, RH &
front covers. Tractors: Super A
(s/n 348644 & up), Super AV, C,
Super C (s/n 176523 & up), 100,
130, 140, 200, 230. Replaces
350637R92, 358540R11,
358541R11, 358542R11. VintageIron™
358540RKT
Battery Box assembly, complete,
with lid. IH red powder coat
finish. Mounts under gas tank.
Inside dimensions: 7.25" W x 9"
L x 8.75" H. Tractors: H, HV,
Super H (1953), W4, SW-4, OS-4.
Replaces 51680DB, 51686DBX.
Vintage Iron™
51680DBKT
Battery box. IH red powder coat
finish. Mounts under seat. Box
does NOT include IH imprint.
Inside dimensions: 7-5/8" W x
14-7/8" L x 9-1/2" H. Tractors:
Super H (s/n 19234 & up), Super
HV (s/n 19234 & up, late
1953-1954). Vintage Iron™
359500R91KT
Battery box assembly, complete.
IH red powder coat finish.
Mounts under gas tank. Lid
includes metal retainers and
rubber bushings, ready to install.
Tractors: M, MV, MD, Super M
(to s/n 28174), W6 Gas, WD.
Replaces 51707D, 51713DXB
(Lid). Vintage Iron™
51707DKT
Battery box assembly. IH red
powder coat finish. Mounts under
seat. Does NOT include IH
imprint. Inside dimensions: 7-5/8"
W x 14- 7/8" W x 9- 1/2" H.
Tractors: Super M Gas / Dsl (s/n
28175 & up), Super MTA.
Vintage Iron™
358693R91KT
Battery box assembly. IH red
powder coat finish. Mounts under
seat. IH-approved logo imprint.
Rear light bolts to left side of box.
Inside dimensions: 15" L x 8" W
x 9-1/2" H. Tractors: 350, 450.
Vintage Iron™
*Serviceable for 300, 400; light
mounts on opposite side.
362059R92KT
Battery CoverREPLACES
Battery Box Cover. Cover comes painted.
Tractors: 706, 756, 806, 856, 966, 1066, 1206,
1256, 1456, 1466, 1566. Vintage Iron™
71717C91
IH-3-180www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
Wiring HarnessesREPLACES
354252R92 Wiring harness, 6-volt with 7
cables for systems without
ground cables and tractors with
a voltage regulator. Tractors: Cub
(prior to s/n 210000), Cub Lo-Boy
(prior to s/n 10000). VintageIron™
Wiring harness, 6-volt with 4
cables for systems with a
generator relay. Tractors: Cub
(prior to s/n 210000), Cub Lo-Boy
(prior to s/n 10000). VintageIron™
351325R91
Wiring harness assembly, 6-volt
light switch to rear lights for
systems with ground cables.
Tractors: Cub (prior to s/n
210000), Cub Lo-Boy (prior to s/n
10000). Vintage Iron™
363508R91
Wiring harness main assembly,
6-volt with 8 cables for systems
with ground cables and voltage
regulator. Tractors: Cub (prior to
s/n 210000), Cub Lo-Boy (prior to
s/n 10000). Vintage Iron™
363507R91
Wiring harness assembly, rear
light. Tractors: Cub, Cub Lo-Boy.
Vintage Iron™
387312R91
Wiring harness main assembly
for lights. Tractors: A, B. VintageIron™
51998D
Wiring harness assembly, switch
to rear lights. Tractors: A, B.
Vintage Iron™
30711DX
Wiring harness for ignition and
lighting. Tractors: Super A, A-1,
AV, AV1, C, Super C, 100, 130,
140, 200, 230. Vintage Iron™
358109R92
Wiring harness, light switch to
rear lights. Tractors: Super A,
AV, 300, 350 Diesel. On 300 and
350 Diesel used as harness for
heater control switch to magnetic
switch. Vintage Iron™
358117R91
Wiring harness assembly, switch
to rear lights. Tractors: C, Super
C. Vintage Iron™
358118R91
Wiring harness for headlights.
Tractors: H, HV, M, MD, MDV,
MV, Super M, MTA (s/n F501 to
F28174). Vintage Iron™
52973DA
Wiring harness switch to rear
light. Tractors: H, HV. VintageIron™
358311R91
Wiring harness for headlights.
Tractors: Super H, HV (s/n 501
to 19233), Super M, MTA (s/n
F28175 to F52627), 200, 230.
Vintage Iron™
358916R91
Wiring harness main cable with
battery ignition for gas engines.
Tractors: M, MV (s/n FBK22991
& up), Super M, MTA (s/n F501
to F28174). Vintage Iron™
354296R91
Wiring harness, switch to rear
light. Tractors: M, MD, MV,
Super MD & MDVT. Replaces
358563R91. Vintage Iron™
358121R91
Wiring harness main cable with
battery ignition. Tractors: Super
W6 (prior to s/n 9084). VintageIron™
357912R91
Wiring harness assembly, 6-volt
light switch to rear lights.
Tractors: 100, 130. VintageIron™
363476R91
Wiring harness assembly, 6-volt
for rear lights. Tractors: 230.
Vintage Iron™
366461R91
Wiring harness main assembly,
12-volt Diesel with 6 cables.
Tractors: 300, 350. VintageIron™
366839R91
IH-3-181www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
Ammeter GaugesREPLACES
360053R91 Gauge, ammeter with bracket fits
2" diameter hole. For wheel
tractors, cotton pickers and
harvestors. Replaces 378424R91.
Vintage Iron™
Gauge has 30-0-30 range, fits 2"
diameter hole. For wheel
tractors, cotton pickers &
harvesters. Replaces 360053R91,
378424R91, 393334R91.
536229R1
Gauge, ammeter has 20-0-20
range, original style with IH logo.
Fits 2" diameter hole, stainless
steel bezel, black backround,
white letters and white pointer.
Tractors: Cub, A, B, Super A, A1,
AV, AV1, C, Super C, H, HV,
Super H, HV, M, MV, MDV, MD,
Super M, M-TA, O-4, OS-4, 0-6,
OS-6, ODS-6, W4, W-6, WD-6,
W-9, WD-9, WR-9, WDR-9.
Vintage Iron™
354473R91
Ammeter gauge has 60-0-60
range unlighted, fits 2" dia. hole,
stainless bezel, black background,
white letters, and white pointer.
AMG60
Grommet, used on electrical
instrument mounting panel cover.
Tractors: A & AV, B & BV, H &
HV, M & MV, MD, Super H & HV,
Super M & MTA, W4, Super W4,
O4, OS4, W6, WD6, O6, OS6,
Super W6 & W6TA, W9, WD9,
WDR9, WR9. Crawlers: T6, TD6,
T9, TD9. Vintage Iron™
52062D
Amp gauge. Metal base, glass
lens and black face with white
letters. Includes the IHC logo and
part number. Tractors:
(1939-1946) A, B, H, M, W, I, O
series. Vintage Iron™
42383DC
Fuse Holder KitREPLACES
Replacement fuse holder kit. Mounts in 5/8" dia.
hole in instrument panel. Includes 20 amp fuse,
2 spade connectors and mounting hardware.
Tractors: Cub, Cub Lo-Boy, Hydro 70 & 86,
Hydro 100, 140, 404, 424, 444, 454, 464, 504,
574, 606, 656, 664, 666, 674, 686, 706, 756,
766, 826, 856, 966, 1026, 1066, 1206, 1256,
1456, 1466, 1468, 1566, 1568, 2400A, 2404,
2424, 2444, 2500A, 2504, 2544, 2606, 2656,
2706, 2756, 2826, 2856, 4100, 4156, 4166,
4186, 4366, 4386 (prior to s/n 1500), 4568, 4586
(prior to s/n 1500), 21026, 21206, 21256, 21456.
376852R91
Fuse HolderREPLACES
230246 Fuse holder, less fuse. 20 amp,
fits ½" hole. Tractors: 100, 130,
140, 200, 230, 240, 300, 330,
340, 350, 400, W400, 404, 424,
444, 450, W450, 454, 460, 464,
504, 544, 560, 574, 606, 650,
660, 656, 664, 666, 674, 686,
706, 756, 806, 826, 856, 966,
1026, 1066, 1206, 1256, 1456,
1466, 1468, 1566, 1568, 2606,
2400A, 2424, 2444, 2500A, 4100,
4156, 4166, 4186, 4366, 4386,
4568, 4586, Hydro 70, Hydro 86,
Hydro 100, A, Super A, AV, Super
AV, B, BN, C, Super C, H, Super
H, HV, Super HV, M, Super M,
MD, Super MD, MDV, MV, Super
MTA, O4, O6, OS4, OS6, ODS6,
W4, W6, Super WD9, Super
WDR9, Cub, Cub Lo-boy, Cub
154 Lo-Boy, Cub 185 Lo-Boy.
Vintage Iron™
IH-3-182www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
VoltmeterREPLACES
Voltmeter. Gauge has 10 to 16 volt range,
stainless bezel, black background, white letters,
red pointer.
VOLT12
Alternator Conversion KitsREPLACES
Alternator conversion kit, updates older 6 volt
tractors to 12 volt charging system. Kit includes
rebuilt unicharge alternator with pulley, internal
self-exciting regulator, 12 volt resistor, wiring
harness, brackets, hardware, and instructions.
Mounts under hood without sheet metal
modification. Tractors: M, Super M. Uses
ALT263SE and 8NE10306 resistor.
IHCALTM
AlternatorsREPLACES
A187623 Alternator assembly. 12 volt, 90
amp, less pulley. Tractors: 1896,
2096, Maxxum Series 5120,
5130, 5140, 5220, 5230, 5240,
5250, MX100, MX110, MX120,
MX135, MX80C, MX90C.
Crawlers: 650G (w/o cab).
Replaces Bosch 0-120-484-011.
Alternator. Tractors: 100, 130, 140, 786, 886,
986, 1086, 1486.
103798A1
Alternator. 61 amp, external
regulator, 2 terminal 12 o'clock
position. Replaces IH alternators
389276R91, 397091R91,
532176R91, 702337C91.
Replaces Delco alternators
1100630, 1100687, 1100791,
1100805. Tractors: Hydro 100;
444, 504, 544, 606, 615, 656,
706, 756, 766, 786, 806, 856,
886, 966, 986, 1066, 1086, 1206,
1256, 1275, 1456, 1466, 1468,
1486, 1586, 2444, 2544, 2606,
2656, 2706, 2756, 2806, 2856,
3444, 3514, 3516, 3616, 3800,
3850, 4100, 4300, 21206, 21256,
21456. Combines: 105, 205,
315, 403, 503, 815, 915, 4000,
5000. Cotton Pickers: 601, 602,
616, 622. Windrowers: 210, 225,
275, 375.
1100883
Alternator.63 AMP. Tractors: 454, 504, 574,
656, 664, 754, 766, 826, 856, 966, 1026, 1066,
1456D, 1466, 2656, 2756, 2826, 2856.
103805A1
Alternator.105 AMP. Tractors: 3088, 3288,
3688, 5088, 5288, 5488, 6588, 6788.
103808A1
Alternator.65 AMP. Tractors:
885, 990, 995, 1190, 1210, 1212,
1290, 1390, 1490.
104020A1
Alternator. Tractors: 615, 766, 786, 886, 966,
986, 1066, 1086, 1466, 1486, 1586. Combines:
4000, 5000.
103804A1
IH-3-183www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
Alternator PulleysREPLACES
Pulley, 3-1/8" dia., 5/8" shaft bore, 2 grooves for
1/2" wide v-belt. Use with alternator ALT-15105.
AP3158
REPLACES AlternatorsSold outright - no cores to bother with. No deposit... No
return.
1102920 Alternator, 63 amp., internal
regulator. 3 terminal, 3 o'clock
position.
Alternator, 63 amp., internal
regulator. 2 terminal, 3 o'clock
position.
1102921
Alternator, 63 amp unicharge one wire
connection.
ALT263SE
Alternator, 80 amp., internal
regulator. 2 terminal, 3 o'clock
position.
1103155
Alternator, 80 amp., internal
regulator. 3 terminal, 3 o'clock
position.
1103160
Alternator 80 amp unicharge one
wire connection.
ALT280SE
Alternator Repair Kits
Most individual parts in each kit may be ordered separately.
1891055 & 1891055HD are not interchangeable.
REPLACES
Repair kit, services TISCO 105 amp. alternator
ALT15105SE. Can also service Delco alternators:
1101194, 1101440, 1105536, 1105538,
1105540, 1105560, 1105609.
*Closeout item. Available while supplies last
ARKSE9
Front bearing
Rear bearing
Swing arm brush assembly
Rectifier
Heavy duty regulator
Diode trio
Misc. hardware
Bearing, alternator front.907998
Bearing, alternator rear.1974862
Diode trio, Delco alternator.1971528
Rectifier assembly, Delco alternator. Cannot bereplaced by 1891055HD
1891055
Rectifier assembly, Delco alternator. Will notreplace 1891055
1891055HD
Brush holder kit, alternator.BHK1
Brush holder kit, alternator (HD brush holder &
brushes)
BHK2
GeneratorsREPLACES
Generator. Tractors: Cub Cadet 100 series, 70
series, Cub Cadet 86.
103809A2
IH-3-184www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
Sealed Beam LampsREPLACES
358890R92-6V Light, 6 volt sealed beam unit.
Tractors: Cub, Cub Lo-Boy,
Super A & AV, C, Super C, H &
HV, M & MD, Super M & MD,
Super W4, Super W4, Super W6
& WD6, WDR9, Super WD9, 100,
130, 140, 200, 230, 240, 300,
340, 350, 400, 450. VintageIron™
Light, 12 volt sealed beam unit.
Tractors: Cub, Cub Lo-Boy,
Super A & AV, C, Super C, H &
HV, M & MD, Super M & MD,
Super W4, Super W4, Super W6
& WD6, WDR9, Super WD9, 100,
130, 140, 200, 230, 240, 300,
340, 350, 400, 450. VintageIron™
358890R92-12V
Lamp assembly, front or rear,
12-volt sealed beam type, flat
backed, zinc plated. Includes nut,
washer, and spacer. Tractors:
Cub, Cub Lo-Boy, A, Super A &
AV, B, C, Super C, H, HV, Super
H & HV, M, MD, Super M &
MTA, O4, OS4, W4, Super W4,
O6, OS6, W6, WD6, Super W6,
W9, WD9, Super WD9, 100, 130,
140, 200, 230, 240, 300, 330,
340, 350, 400, 450. Use sealed
beam unit 358890R92-12V.
Replaces 370734R91,
373572R91, 381181R91. VintageIron™
357884R91V12
Lamp assembly, front or rear,
6-volt sealed beam type, flat
back, zinc plated. Includes nut,
washer, and spacer. Tractors:
Cub, Cub Lo-Boy, A, Super A &
AV, B, C, Super C, H, HV, Super
H & HV, M, MD, Super M &
MTA, O4, OS4, W4, Super W4,
O6, OS6, W6, WD6, Super W6,
W9, WD9, Super WD9, 100, 130,
140, 200, 230, 240, 300, 330,
340, 350, 400, 450. Use sealed
beam unit 358890R92-6V.
Replaces 370734R91,
373572R91, 381181R91. VintageIron™
357884R91
Clamp, lamp assembly. Tractors:
Cub, Cub Lo-Boy, A, Super A, B,
C, Super C, H, Super H, M, Super
M, MD, O4, OS4, W4, O6, OS6,
W6, WD6, Super W6, W9, WD9,
100, 130, 140, 200, 230, 240,
300, 330, 340, 350, 400, 450,
600, 650. Use with 45640DB
lamp. Vintage Iron™
350920R1
Lamp assembly, bulb type with
deep cone, front or rear, 6-volt,
zinc plated, includes nut, washer
and spacer. Tractors: Cub, Cub
Lo-Boy, A, B, H, M, MD, O4,
OS4, W4, O6, OS6, W6, WD6,
W9, WD9. Does not include
mounting bracket. Replaces
357884R91, 381181R92,
381182R92. Vintage Iron™
45640DB
Lamp assembly, bulb type with
deep cone, front or rear, 6 volt,
IMPORT. Includes nut, washer
and spacer. Tractors: Cub, Cub
Lo-Boy, A, Super A, B, C, Super
C, H, Super H, M, Super M, MD,
O4, OS4, W4, Super W4, O6,
OS6, W6, WD6, Super W6, W9,
WD9, 100, 130, 140, 200, 230,
240, 300, 330, 340, 350, 400,
450, 600, 650. Replaces
357884R91, 381181R92,
381182R92. Vintage Iron™
45640DB-IMP
Rear combo light assembly,
12-volt or 6-volt. Red jewel light
with rotary switch. Includes
6-volt bulb installed and 12-volt
bulb for conversion. Tractors:
Cub, Super A & AV, C, Super C,
H, HV, Super H & HV, M, MD,
MDV, MV, Super M & MTA, O4,
OS4, W4, Super W4, O6, ODS6,
W6, WD6, W6TA, Super W6,
W9, WD9, WDR9, WR9, Super
W9, 100, 130, 140, 200, 230,
240, 300, 330, 340, 350, 400,
450. Replaces 355911R91.
Vintage Iron™
355914R91-6V
IH-3-185www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
Sealed-beam combination rear
light bulb, 12-volt. 4-1/2" diameter
sealed beam combo light bulb
(used with small separate bulb).
Tractors: Following with 12-volt
system - Cub, 140 (s/n 26801 &
up), 154, 184, 185, 340, 354, 364,
384, 404, 424, 444, 454, 504,
544, 560, 606, 656, 660, 574,
666, 674, 686, 706, 756, 766,
786, 806, 826, 856, 886, 966,
986, 1066, 1086, 1206, 1256,
1456, 1466, 1468, 1486, 1566,
1568, 1586, 2300A, 2400A, 2404,
2424, 2444, 2504, 2544V, 2606,
2656, 4366, 4386, 4568, 4586,
4786, Hydro 86, Hydro 100,
Hydro 186. Vintage Iron™
371461R2
Sealed Beam Lamps
12 volt
REPLACES
SIZETERMINAL
TYPE
TERMINAL
NUMBER
INDUSTRY
NUMBER
Replaces
4-1/2" Dia.Slip-on24411-1126470C1
4-1/2" DiaScrew2H 7606131203C1
4-1/2" Dia.Screw2H7610131508C1
5-3/4" Dia.Screw24419371443R91
4-1/2" Dia.Screw24411373662R91
4-1/2" Dia.Screw24406390756R91
6 voltREPLACES
SIZETERMINAL
TYPE
TERMINAL
NUMBER
INDUSTRY
NUMBER
Replaces
5-3/4" Dia.Screw24019371457R91
4-1/2" Dia.Screw24511373661R91
Warning LightREPLACES
67538C92 Warning light, 12 volt, mounts on
fender or cab, two 5" amber
lenses.
Rectangular fender and cab
mount warning light One red and
one amber lens with amber side
marker, black ABS mount ---
Single contact bulbs #57 (small)
& #1156 (large) 12 Volt --- 4.5"
wide, 1/2" diameter stud.
Serviceable for models with
rectangular warning lights.
Tractors: 766, 966, 1066, 1466,
1468, 1566, 1568. VintageIron™
537328R1
Taillight AssembliesREPLACES
370716R91 Taillight Assembly. Includes
12-volt bulb & mounting bolts.
Painted black, solid bucket. 1-3/4"
c-c mounting studs. Tractors:
Cub Lo-Boy (s/n 10001 & up),
140, 154, 240, 340, 404, F856.
Lawn & Garden Tractors: Cub
Cadet (to s/n 400000), 70, 71, 72,
102, 122, 123. Vintage Iron™
Round red tail light assembly with
license lamp window. 4-1/2"
diameter -- 1 7/8" c-c mounting
stud. Tractors: C, 100, 130, 140,
154, 184, 185, 240, 340, 404,
424, 454, 460, 504, 544, 574,
606, 656, 706, 756, 806, 856,
1206, 1256. Cub Cadets: 70, 71,
72, 100, 102, 122, 123.
Industrial: 2404, 2424, 2504,
2544, 2656, 2706, 2756, 2806,
2856, 21206, 21256, 2400A,
2500A. Vintage Iron™
45645HA
Red glass tail light lens.
Interchangeable with the original.
Tractors: A, AV, Super A, Super
A1, Super AV, Super AV1, C,
Super C, H, HV, Super H, Super
HV, M, Super M, MD, Super MD,
MV, MDV, Super MV, Super
MDV, I4, I6, I9, ID9, O4, OS-4,
O6, OS-6, ODS-6, W4, W6, WD6,
W9, WD-9, WR-9, WDR-9,
WR-9S, Cub, Cub Lo-boy.
Vintage Iron™
354308R1
IH-3-186www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
Interior LightsREPLACES
356592R91 Jewel lens assembly, red dot
pattern. Also used for low oil
pressure warning light. Tractors:
100, 130, 140, 200, 230, 240,
300, 330, 340, 400, 450, 600,
650, Cub, A, Super A, AV, B, BN,
C, Super C, H, HV, Super H, I4,
I6, I9, M, MV, MD, MDV, Super
M, MTA, W4, Super W4, Super
W6, W6TA, W9, Super W9,
WD9, WDR9, W400, W450.
Vintage Iron™
Light Bulbs & Light PartsREPLACES
6V25W Light Bulb, 6 volt, 25 watt. For
TP-AA3075R. Vintage Iron™
Light bulb, 12 volt, 25 watt bulb.
1156. Vintage Iron™12V25W
Knob for combination rear light &
tail light switch (used only with
switch body with 15/32" shaft).
Tractors: Cub, Cub Lo Boy,
Super A & AV, C, Super C, H, HV,
Super H & HV, M, MD, Super M
& MTA, WR9S, Super W6, Super
WD9, 100, 130, 200, 230, 300,
330, 340, 350, 400, 450, 600,
650. Vintage Iron™
359773R91
Bracket, rear light. Tractors: Cub,
Cub Lo-Boy. Vintage Iron™352121R11
Light terminal plate with screws.
Tractors: A, B, C, H, HV, M, MD,
Super A, Super AV, Super C,
Super H, Super HV, Super M,
Super MTA, W4, Super W4, O4,
OS4, W6, WD6, O6, OS6, ODS-6,
Super W6, W6TA, W9, WD9,
WDR9, WR9, WR9S, Super WD9,
Super WDR9, 200, 230, 300, 330,
350, 400, 450, 600, 650. VintageIron™
79407H
Lens, 5 inch light, combination
rear light and tail light. Tractors:
Cub, Cub Lo-Boy, A, B, Super A
& AV, C, Super C, H & HV, M &
MD, Super M & MTA, Super W4,
Super W6 & WD6, 100, 130, 200,
230, 300, 340, 350. VintageIron™
350478R1
Gasket, light lens for wheel
tractors, cotton pickers &
harvesters. Vintage Iron™
53527D
Gasket, for lens in sealed beam
units 358890R92. Tractors: Cub,
Cub Lo-Boy, Super A & AV, C,
Super C, H & HV, Super H & HV,
M & MD, Super M & MD, Super
W4, Super W6 & WD6, WDR9,
Super WD9, 100, 130, 140, 200,
230, 240, 300, 330, 340, 350,
400, 450. Vintage Iron™
358892R91
Moulding trim ring for headlights
or rear lights. Tractors: Cub, Cub
Lo-Boy, A, B, Super A, B, Super
A, AV; C, Super C, H, HV, Super
H, HV, M, MV, MD, MDV, Super
M, M-TA, MD, 0-4, 0S-4, O-6,
0S-6, ODS-6, W-4, W-6, WD-6,
W-9, WD-9, WDR-9, WR-9,
WRS-9, Super WD-9, WDR-9,
100, 130, 140, 200, 230, 240,
300, 340, 350, 400, 450, 600,
650. Vintage Iron™
53525DA
Sealed-beam combination rear
light bulb, 12-volt. 4-1/2" diameter
sealed beam combo light bulb
(used with small separate bulb).
Tractors: Following with 12-volt
system - Cub, 140 (s/n 26801 &
up), 154, 184, 185, 340, 354, 364,
384, 404, 424, 444, 454, 504,
544, 560, 606, 656, 660, 574,
666, 674, 686, 706, 756, 766,
786, 806, 826, 856, 886, 966,
986, 1066, 1086, 1206, 1256,
1456, 1466, 1468, 1486, 1566,
1568, 1586, 2300A, 2400A, 2404,
2424, 2444, 2504, 2544V, 2606,
2656, 4366, 4386, 4568, 4586,
4786, Hydro 86, Hydro 100,
Hydro 186. Vintage Iron™
371461R2
IH-3-187www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
3ELECTRICAL
Replacement parts to fit
I.H.C.
Brake DiscsREPLACES
Bonded lined brake discs. 7-1/8" x 4", 12 spline.
Tractors: 560, 660. Combines: 151 Hillside
diesel, 403 Hillside, 453 Hillside, 915, 1460 (prior
to s/n 32000), 1480 (prior to s/n 34000).
Replaces 369079R91, 121963C91.
1975446C3AF
Bonded lined brake disc. 6-1/2" x 3-1/2", 12
spline. Tractors: M & MV (s/n 294226 & up),
MD & MDV (s/n 285505 & up), Super M & MD,
W6 (s/n 45847 & up), WD6 (s/n 45301 & up),
Super W6 & WD6, 400, W400, W450.
Combines: 141 & 141 Hillside, 151 Hillside gas
& L.P., 181, 403, 503, 615, 715 (prior to s/n
23000), 815. Cotton Pickers: 414, 416, 420,
482, 616, 622. Replaces 357117R91,
368179R91, 321162R91.
1963810C2AF
Bonded lined brake discs. 5" x 2-3/4", 10 spline.
Tractors: Super C, 200, 230, 240, 330, 340 gas,
404, 2404. Replaces 356071R91, 368181R92.
1975456C3AF
Bonded lined brake discs. 5-5/8" x 3-3/8", 10
spline. Tractors: H (s/n 391358 & up), Super H,
Super W4, 300, 350. Replaces 358195R91,
368183R91, 368183R91.
1975457C3AF
Bonded lined brake disc. 6" x 3-1/8", 10 spline.
Tractors: 340 diesel, 460, 504, 606, 2504, 2606.
Replaces 368292R92.
1975460C3AF
Bonded lined brake disc. 6-1/2" x 3-1/2", 10
spline. Tractors: Hydro 70 & 86, 656, 664, 666,
686, 2656. Replaces 391445R91.
1975463C3AF
Bonded lined brake disc. 6-1/2" x 3-1/2", 10
spline. Tractors: 354, 364, 384, 424, 444, 2300,
2424, 2444, 3414 (s/n 3516 & up), 3444.
Replaces 395161R1.
1975464C2AF
Bonded lined brake disc. 8" x 5", 12 spline.
Tractors: Hydro 100, 706, 756, 766, 806, 826,
856, 966, 1026, 1066, 2706, 2756, 2806, 2826,
2856. Replaces 384166R92.
1975468C2AF
Bonded lined brake discs. 11-3/8" x 8-1/4", 12
spline. Tractors: 1456, 1466, 1468. Replaces
528702R.
1975472C1AF
Disc Brake Actuating BallREPLACES
17028R1 Steel ball, 7/8" diameter used on
tractors and combines.
Seal Package For Disc BrakesREPLACES
Seal package, for power disc brake piston
housing. Tractors: Hydro 100, 706, 756, 766,
826, 856, 766, 1066, 1206, 1256, 1466, 1468,
also industrial versions above tractors. Replaces
406726R91. Contents include (1) 530806R91
lip seal, (1) 530807R2 outer piston ring seal, (1)
530808R2 inner piston ring seal, (1) 530789R1
brake hosing seal ring.
66487C91
Park Lock LinkageREPLACES
Park lock linkage, turnbuckle. Tractors: 706,
756, 766, 806, 726, 756, 966, 1026, 1066, 1256,
1456, 1456, 1466, 1566, 1568. Also industrial
versions of above. (A)
390856R1
Spring loaded turnbuckle, optional with
390856R1. Once turnbuckle is properly adjusted
the spring tension will activate the parking
mechanism. Use with operating rods 390857R1
& 390858R1, not included. (A)
390856R1-SL
Park lock linkage, left hand thread park lock
operating rod. Tractors: 706, 756, 766, 806,
826, 856, 966, 1066, 1256 1456, 1456, 1566,
1568. Also industrial versions of above. (B)
390857R1
Park lock linkage, right hand thread park lock
operating rod. Tractors: 706, 756, 766, 806,
826, 856, 966, 1066, 1256, 1456, 1566, 1568.
Also industrial versions above. (C)
390858R1
IH-4-188www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
4POWER TRAIN
Replacement parts to fit
I.H.C.
Return SpringREPLACES
Spring, brake pedal return. Tractors: H, HV, M,
MD, MV, MDV, 544. Manufactured to restoration
standards.
48599DA
Brake PlatesREPLACES
392777R2 Brake plate, intermediate. (2 used
per machine). Use with brake disk
assembly number 1975468C2AF.
Tractors: Hydro 100, 706, 756,
766, 806, 826, 856, 966, 1026,
1066, 1206, 1256, 2706, 2756,
2806.
Brake plate, primary. (2 used per
machine). Use with brake disk
assembly number 1975468C2AF.
Tractors: Hydro 100, 756, 766,
826, 966, 1026, 1066, 1256.
527444R1
Master CylinderREPLACES
Master brake cylinder assembly. Tractors:
Hydro 84, 385, 454, 464, 484, 574, 674, 784,
884, 2400A, 2500A.
527542R92
Brake Pedal ShaftREPLACES
Shaft, brake pedal for disc brakes. Tractors: M
(s/n 294226 & up), MD (s/n 285605 & up), Super
M & MTA, W6, WD6, Super W6, 400, 450.
Manufactured to restoration standards.
357046R1
Lined Brake BandsREPLACES
Lined brake bands with rod. Tractors: A, Super
A (prior to s/n 339641), B.
51582DDXAF
Lined brake bands without rod. Tractors: H, 4.58344DCXAF
Lined brake bands without rod. Tractors: M, 6.58345DCXAF
Lined brake bands with rod. Tractors: Cub (prior
to s/n 173600).
350967R21AF
Lined brake bands without rod. Tractors: C.351624R92AF
Lined brake bands without rod. Tractors: Super
A (s/n 339642 & up), 100, 130, 140.
358660R21AF
Lined brake bands without rod. Tractors: Cub
(s/n 173600 & up), Cub Lo-Boy.
358753R21AF
Brake DrumREPLACES
350805R2 Brake drum. Tractors: Cub.
Seal for Disc Brake Pull RodREPLACES
1860959M1 Brake Rod Seal
IH-4-189www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
4POWER TRAIN
Replacement parts to fit
I.H.C.
Torque AmplifiersREPLACES
• Torque Amplifier assemblies are made and inspected to
specifications
• Every part is examined, measured and tested to assure
compliance with specifications
• Core return tags supplied
• Core credit issued after inspection of core
1251698C92 Torque amplifier,
Remanufactured. 3 direct drive
disc and 2 anti-free wheel discs.
Tractors: 706, 756, 766, 786,
806, 826, 856, 886, 966, 986,
1066, 1086, 1206, 1256, 1456,
1466, 1468, 1486.
Torque amplifier "Mechanical"
with nut & belt pulley gear.
Remanufactured. Tractors: 300,
350, 460. Available as Drop Ship
only.
363854R93
Torque amplifier "Mechanical"
with nut & belt pulley gear.
Remanufactured. Tractors: 400,
450, 560, 660. Available as Drop
Ship only.
363499R94
Torque amplifier "Mechanical"
with nut. Remanufactured.
Tractors: 656, 666, 686, 2756.
Available as Drop Ship only.
394814R91
Spring for Torque Amplifier
Clutch Release
REPLACES
Spring, torque amplifer clutch release. Tractors:
Super MTA, Super W6TA, 100***, 130***,
140***, 400, 450, 560 and 660. Manufactured
to restoration standards.
*** Spring also used on tractors equipped with
foot accelerator.
61084D
Torque Amplifier Gasket &
Overhaul Kits
REPLACES
Gasket kit, PTO. Complete gasket, o-ring & seal
package. For units with spring activated brakes.
Tractors: Hydro 100, Hydro 186, 706, 756, 766,
806, 826, 856, 886, 966, 986, 1026, 1066, 1086,
1206, 1256, 1456, 1466, 1468, 1486, 3388.
77721
PTO overhaul kit. Fits 1259531 valve housing.
Contains complete disc package, gaskets &
o-rings. Tractors: 5088, 5288, 5488; Case/IH7110, 7120, 7130, 7140.
977724
Gasket kit, torque amplifier. Tractors: 706, 756,
766, 786, 806, 826, 856, 886, 966, 986, 1066,
1086, 1206, 1256, 1456, 1466, 1468, 1486.
79020
Gasket kit, torque amplifier. Tractors: 1566,
1568, 1586.
79018
IH-4-190www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
4POWER TRAIN
Replacement parts to fit
I.H.C.
Tru-Power Clutch KitsREPLACES
351760N-KIT Clutch kit "NEW" pressure plate
assembly, "NEW" 6 ½" woven
disc, 10 spline, 15/16" hub, new
release bearing & pilot bushing.
Tractors: Cub, Cub Lo-Boy.
Clutch kit without release
bearing, contains 5-1/2"
re-manufactured pressure plate
assembly, remanufactured disc,
10 spline, 15/16" hub, woven
disc. Tractors: Cub 154 Lo-Boy,
184, Cub 185 Lo-boy. Core return
tags supplied for each pressure
plate and disc. UPS call tag
included for prepaid shipment of
cores. Core credit issued after
inspection of cores.
404639KLB
Clutch kit, contains
remanufactured pressure plate
assembly, 9", 6 springs;
remanufactured disc, 9", 6 spline,
1-1/4" hub, woven lining. New
release bearing and pilot bushing.
(Rockford style clutch). Tractors:
A, Super A, B, C, Super C, 100,
130, 140, 200, 230, 240, 404,
2404.
375493NC
Clutch kit contains
remanufactured pressure plate
assembly, 10", 6 springs;
remanufactured disc; 10", 10
spline, 1-1/4" hub, new release
and pilot bearings. Rockford style
clutch. Tractors: H, HV (prior to
s/n 391357).
52900K
Clutch kit contains
remanufactured pressure plate
assembly 11", 9 springs, new disc
11", 10 spline, 1-1/2" hub, organic
lining, new release and pilot
bearings. Rockford style clutch.
Tractors: M & MD (prior to s/n
294707).
52840K
Clutch kit, contains 12"
remanufactured pressure plate
assembly, 17 spline, 1-3/4" hub,
12 springs, 12" remanufactured
disc, 11 spline 1-3/16" hub,
woven lining, new release and
pilot bearings. Tractors: Super
MTA, 400, 450, 460.
359121K
Clutch kit for torque amplifier.
Contains 7" remanufactured
pressure plate assembly, 6
springs, 7" new metallic disc, 14
spline, 1-1/2" hub. New release
bearing. Tractors: Super MTA,
300, 330, 340, 350, 400, 450,
460, 504, 544, 560, 606, 656,
660, 664, 666, 686, 2504, 2544,
2606, 2656.
360215NC
Clutch kit, contains 10-1/2"
remanufactured pressure plate
assembly, 16 spline, 1-11/16"
hub, 9 springs, 10-1/2"
remanufactured disc, 10 spline,
1-1/8" hub, 4 pads. New release
bearing and (2) pilot bearings.
Tractors: 300, 320, 330, 340,
350, 460, 504, 544, 606,
Industrials: 2500, 2504, 2544,
2606, 3616 gas (prior to s/n 1945)
and diesels (prior to s/n 2117).
360746NC
Clutch kit, contains 11"
remanufactured pressure plate
assembly, 10 spline, 1-5/8" hub,
3 springs, 11" new disc, 10
spline, 1-1/8" hub, 6 pads, new
release and pilot bearings.
Tractors: 384, 454, 464, 484,
485, 574, 584, 585, 674, 684,
784, 884, 2400A, 2400B, 2500A,
2500B, 3500A. NO CORE
REQUIRED.
70716NC
Clutch kit, contains 12"
remaufactured pressure plate
assembly, 10 spline, 1-5/8" hub,
12 springs, 12" remanufactured
disc, 10 spline, 1-1/8" hub, 6
pads, new release and pilot
bearings. Tractors: 584, 684,
784, 884.
85025K
Clutch kit, contains 11"
remanufactured pressure plate
assembly, 16 spline, 1-11/16"
hub, 9 springs, 11"
remanufactured disc, 10 spline,
1-3/32" hub, 4 pads, new release
bearing. Tractors: 656, 664, 666,
686, 2656.
388616K
IH-4-191www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
4POWER TRAIN
Replacement parts to fit
I.H.C.
Clutch kit, contains 12"
remanufactured pressure plate
assembly, 17 spline, 1-3/4" hub,
12 spring, 12" remanufactured
heavy duty disc, 11 spline, 1-3/16"
hub, 6 large pads, new release
and pilot bearings. Tractors: 660,
706, 756, 766, 786, 806, 826,
856, 886, 966, 986, 2706, 2756,
2806, 2856, 3088, 3288, 3688.
405300K
Clutch kit, contains 12" remanufactured heavy
duty pressure plate assembly, 17 spline, 1-3/4"
hub, 12 springs, 12" remanufactured disc, 11
spline, 1-3/16" hub, 6 pads, new release
bearings. Tractors: 706, 756, 766, 786, 806,
826, 856, 986.
104496K
Clutch kit, contains 14"
remanufactured heavy duty
pressure plate assembly, 17
spline, 1-3/4" hub, 15 springs, 14"
remanufactured heavy duty disc,
11 spline, 1-3/16" hub, 6 pads,
new release bearing and pilot
bearings. Tractors: 1066, 1086,
1206, 1256, 1456, 1466, 1468,
1486, 4100, 4156, 4166, 4186,
21206, 21256, 21456.
67597NC
Clutch kit, contains 14"
remanufactured pressure plate
assembly, 18 spline, 1-7/8" hub,
15 springs, 14" remanufactured
heavy duty disc, 13 spline, 1-3/8"
hub, 6 large pads, new release
and pilot bearings. Tractors:
1566, 1568, 1586.
67735K
Clutch kit, single stage, contains
remanufactured pressure plate
assembly, remanufactured 14"
disc (6 large pads), 1-3/16" hub,
11 spline, New release bearing
and New pilot bearing. Tractors:
3388, 3588, 6388, 6588.
142078C91
Clutch DiscsREPLACES
52848DA Clutch disc (Rockford style) 11"
diameter, 1-1/2" hub, 10 spline,
organic lining. Tractors: M (prior
to s/n 294707), 6.
Clutch disc (Rockford style) 11"
diameter, 1-1/8" hub, 10 spline, 6
metallic pads. Tractors: 584,
684, 784, 884.
70093C91
Clutch disc (Rockford style),
6-1/2" diameter, 15/16" hub, 10
spline, organic lining. Tractors:
Cub, Cub Lo-Boy.
351773R91
Clutch disc (woven) NEW 12"
diameter, 1-3/16" hub, 11 spline.
Tractors: Super MTA, Super W6,
400, 450, 560, 660.
375564R91
Clutch disc (4 large pads)
remanufactured 12" diameter,
1-3/16" hub, 11 spline. Tractors:
Super MTA, Super W6, 400, 450,
560, 660, 706, 756, 766, 786,
806, 826, 856, 886, 966, 2706,
2756, 2806, 2826, 2856, 3088,
3288. Used in kit 405300K.
384395R94
Clutch disc (6 large pads)
remanufactured 12" diameter,
1-3/16" hub, 11 spline. Tractors:
Super MTA, Super W6, 400, 450,
560, 660, 706, 756, 766, 786,
806, 826, 856, 886, 966, 986,
2706, 2756, 2806, 2826, 2856,
3088, 3288, 3688. Used in kit
104496K.
384395R92
Clutch disc (woven) NEW 5-1/2"
diameter, 15/16" hub, 10 spline.
Tractors: Cub 154 Lo-Boy, Cub
185 Lo-Boy, 184. Used in kit
404639KLB.
404640R93
Clutch disc (woven) 10" diameter,
1-1/4" hub, 10 spline. Tractors:
H, HV. Used in kit 52900K.
64772DA
Clutch disc (4 regular pads),
10-1/2" diameter, 1-1/8" hub, 10
spline. Tractors: 300, 330, 340,
350, 460, 504, 655, 606, 2500,
2504, 2544, 2606, 3616, 8000.
Used in kit 360746NC.
384633R91
IH-4-192www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
4POWER TRAIN
Replacement parts to fit
I.H.C.
Clutch disc (4 regular pads) 11"
diameter, 1-3/32" hub, 10 spline.
Tractors: 656, 664, 666, 686,
2656, 3616. Used in kit 388616K.
388625R91
Clutch disc (6 large pads) 14"
diameter, 1-3/16" hub, 11 spline.
Tractors: 1066, 1086, 1206,
1256, 1456, 1466, 1468, 1486,
3388, 3588, 4100, 4156, 4166,
4186, 6388, 6588. Used in kit
67597NC.
393117R93
Clutch disc (woven) NEW 9"
diameter, 1-1/4" hub, 6 spline.
Tractors:: A, B, C, Super A,
Super C, 100, 130, 140, 200, 230,
240, 2404. Used in kit 375493NC.
56631R1
Clutch Pressure Plate
Assemblies
REPLACES
70716C1 New pressure plate assembly.
11" diameter with 10 spline,
1-5/8" hub. Tractors: 454, 464,
484, 574, 584, 674, 784, 884.
Clutch ShaftREPLACES
Fits Cub. 42-3/8" long, 10 splines clutch end, 10
& 6 splines transmission end.
351534R11
Shaft, brake pedal for disc brakes. Tractors: M
(s/n 294226 & up), MD (s/n 285605 & up), Super
M & MTA, W6, WD6, Super W6, 400, 450.
Manufactured to restoration standards.
357046R1
Clutch shaft kit, contains New clutch shaft, Newrelease bearing carrier and clutch release fork.
Tractors: 786, 886, 986, 1086, 1486, 1586,
3088, 3288, 3388, 3588, 3688, 3788, 6388,
6588, 6788.
104037R91
Clutch Release Sleeve CarrierREPLACES
6758D Clutch release sleeve carrier.
Tractors: M.
Clutch Release BearingsREPLACES
Clutch release bearing, 3.697" O.D., 2.249" I.D.,
.7970" wide bore. Tractors: M, MD, Super M,
Super MD, W6, WD6.
48974D
Clutch release bearing, 3.500" O.D., 2.375" I.D.,
.730" wide bore. Tractors: 300, 330, 340, 350,
424, 444, 460 (with standard clutch), 504, 606,
2424, 2444, 2504.
59879D
Clutch release bearing. 3.5625" O.D., 2.0625"
I.D., .7969" wide bore. Tractors: Super A, B, C,
Super C, H, Super H, 100, 130, 140, 200, 230,
240, 404, 2404.
361292R91
Clutch release bearing. Tractors: Cub, Cub
Lo-boy. (Graphite)
350921R11
Clutch release bearing. 4.125" O.D., 2.500" I.D.,
870" wide bore. Tractors: 400, W400, 450,
W450, 560, 660, *706 (w/std. clutch), 756, 766,
786, *806 (w/std. clutch), *826 (w/std. clutch),
*856 (w/std. clutch) 886, 966, 986, 1066, 1086,
1206, 1256, 1456D, 1466, 1468, 1486, 1566,
1586, 21206, 21256, 21456, *2706 (w/std.
clutch), 2756, *2806 (w/std. clutch), *2826
(w/std. clutch), *2856 (w/std. clutch), 3088,
3288, 3388, 3588, 3688, 3788, 6388, 6588,
6788. Replaces 365867R91.
*Standard clutch, not over-center clutch.
69789C91
Bearing, clutch release for tractors with Torque
Amplifier. Tractors: 300, 330, 340, 350, 400,
450, 460, 504, 544, 560, 606, 656, 660, 664,
666, 686, 2656.
362028R92
IH-4-193www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
4POWER TRAIN
Replacement parts to fit
I.H.C.
Clutch Pilot BearingsREPLACES
Bearing, clutch pilot. 1.378" O.D., .6299" I.D.,
.5669" wide bore. For tractors with C-123 engine.
ST533
Bearing, clutch pilot. 2.0472" O.D., .9843" I.D.,
.5906" wide bore, 2 seals. Tractors: H (s/n
391358 & up), Super H, Super MD, W6, WD6,
400, W400, 450, W450, 560, 660. Replaces
205KDD.
ST544
Bearing, clutch pilot. 1.850" O.D., 0.788" I.D.,
.6550" wide. Tractors: 385, 395, 454, 464, 484,
485, 495, 574, 584, 585, 595, 674, 684, 685,
695, 784, 884, 885, 895, 2400A, 2500A.
537290R91
Bearing, clutch pilot. 2.0472" O.D., .7874" I.D.,
.5906" wide bore, 2 seals. Tractors: 544, 606,
656, 664, 666, 686, 706, 756, 766, 786, 826,
856, 886, 966, 986, 1066, 1086, 1206, 1256,
1456D, 1466, 1468, 1486, 1566, 1568, 1586,
21206, 21256, 21456D, 2544, 2606, 2566, 2706,
2756, 2826, 2856, 3088, 3288, 3388, 3588,
3688, 3788, 4100, 4156, 4166, 5186, 6388,
6588, 6788. Replaces 304KDD.
524598R91
Pilot bushing. I.D. .883", O.D. 1.125", Thickness
.995". Tractors: A, B, C, Super A, Super C, 100,
130, 140, 200, 230, 240, 404, 2404.
364527R91
Clutch pilot bearing. Fits in rear of the crankshaft.
Tractors: Farmall Cub, Cub-Lo-Boy (not for
Farmall 154 & Farmall 184).
251266R1
Clutch CarriersREPLACES
527948R91 Leveling rod and yoke, LH,
19-1/4" long, .875" course thread.
Tractors: 454, 464, 484, 485,
495, 574, 584, 585, 595, 674,
684, 685, 695, 784, 884, 885,
895, Hydro 84.
Clutch release bearing carrier.
Tractors: 495, 595, 695, 895.
1970934C1
Clutch release bearing carrier.
Tractors: 300, 330, 340, 350,
454, 460, 464, 484, 504, 544,
574, 584, 606, 656, 664, 666,
674, 684, 686, 784, 884.
Industrials: 2504, 2544, 2606,
2656.
360501R2
Fork, clutch carrier. Tractors: 706, 756, 766,
786, 806, 826, 856, 886, 966, 986, 1066, 1086,
1206, 1256, 1456, 1466, 1468, 1486, 1566,
1568, 1586, 2806, 3088, 3288, 3388, 3588,
3688, 3788, 4100, 4156, 4166, 4186, 6388,
6588, 6788, Hydro 100.
380110R1
Leveling screw. 1" diameter, 25.5" long, 6"
thread. Tractors: 544, 656, 666, 686, Hydro 70,
Hydro 86.
389542R1
Gearshift Lever KnobREPLACES
53717DA Gearshift lever knob, 3/8" I.D.
Tractors: Cub, Cub Lo-Boy, A,
Super A & AV, B, C, Super C, H,
HV, Super H & HV, M, MD, Super
M & MTA, W4, W6, WD6, Super
W6, W9, WD9, Super WD9, 100,
130, 140, 200, 230, 240, 300,
330, 340, 350, 354, 400, 404,
450, 424, 454, 460.
IH-4-194www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
4POWER TRAIN
Replacement parts to fit
I.H.C.
PTO Clutch Disc KitsREPLACES
68802C91 Clutch disc kit , for independent
PTO using 12 discs and 5 plates.
For single speed IPTO. Tractors:
544, 656, 664, 666, 686, 756,
826, 856, 1026, 1206, 1256,
1456, 1466, 1468, 1486 (to s/n
25999), 4100, 4156, 4166, 4186,
Hydro 70, Hydro 86. Industrials:
2544, 2656, 2756, 2826, 2856,
21026, 21206, 21256, 21456. For
dual speed IPTO. Tractors: 706,
756, 766, 826, 856, 886 (to s/n
16999), 966, 986 (to s/n 23999),
1026, 1066, 1086 (to s/n 47999),
3388 (to s/n 10384), Hydro 100,
Hydro 186 (to s/n 11999).
Industrials: 2706, 2756, 2826,
2856, 21026.
Clutch disc kit for independent
PTO using 9 discs and 7 plates.
Single speed IPTO. Tractors:
1486 (s/n 26000 & up), 1566,
1568, 1586, 3588, 3788, 6588,
6788. Dual speed IPTO: Hydro
186 (s/n 12000 & up), 786, 886
(s/n 17000 & up), 986 (s/n
24000& up), 1086 (s/n 48000 &
up), 3088, 3288, 3388 (s/n 10385
& up), Hydro 3488, 3688, 6388.
68803C91
Clutch disc kit, for single or dual
speed independent PTO using 5
discs and 8 plates. Tractors:
Hydro 84, 385, 395, 464, 484,
485, 495, 574 (s/n 100001 & up),
84, 585, 595, 674, 684, 685, 695,
784, 885, 2400A (s/n 100001 &
up), 2500A (s/n 100001 & up).
66193C91
Fiber PTO Clutch PlateREPLACES
381490R4 Fiber PTO clutch plate, 5-1/4"
O.D., 4" I.D., 51 spline.
Replacement fiber only. Order as
individual item when it is
determined metal disc does not
need replacing. For use in same
application as clutch disc kits
68802C91 & 68803C91.
PTO Oil SealsREPLACES
Seal for PTO shaft, outer, 1-3/8" I.D., 2" O.D.,
.313" width. For single or dual speed
independent PTO output shaft cover. Use with
servicing IPTO output shaft cover. Use when
servicing IPTO clutch disc. Tractors: Hydro 70,
Hydro 86, Hydro 100, Hydro 186, 544, 656, 664,
666, 686, 706, 756, 766, 786, 826, 856, 886,
966, 986, 1026, 1066, 1086, 1206, 1256, 1456,
1466, 1468, 1486 (prior to s/n 25999), 3088,
3288, 3388, Hydro 3488, 3688, 6388.
Industrials: 2544, 2656, 2706, 2756, 2826,
2856, 21026, 21206, 21256, 21456.
381480R1
PTO ShaftREPLACES
PTO shaft (shaft only), 11-5/8" long. Has groove
for bearing snap ring. Tractors: Cub. Can replace
368433R91.
351269R11
PTO drive shaft for independent PTO equipped
tractors. Shaft with 28 teeth. Tractors: Hydro
100, 756, 766, 786, 826, 856, 886, 966, 986,
1066, 1086, 1466, 1468, 3088, 3288, 3688.
528676R1
IH-4-195www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
4POWER TRAIN
Replacement parts to fit
I.H.C.
Safety ShieldREPLACES
51484DX P.T.O. safety guard. Tractors: A,
B, Super A & AV, C, Super C, H,
HV, Super H & HV, M & MD,
Super M & MTA, 100, 130, 140,
200, 230, 240, 300**, 330**,
350**, 400**, 450**, 504, 544,
606. Guard comes painted.
Manufactured to restoration
standards. ** Transmission
drive
P.T.O safety shield for models
with belt pulley. Tractors: A, B,
Super A, AV, C, Super C. Shield
comes painted. Manufactured to
restorations standards.
55398DA
P.T.O. safety shield for models
without belt pulley. Tractors: A,
B (s/n 19975 & up), Super A, AV,
C, Super C. Shield comes primed.
Manufactured to restoration
standards.
55403DA
P.T.O. safety shield. Tractors: H
& HV, Super H & HV. Shield
comes painted. Manufactured to
restoration standards.
66387DAXA
P.T.O. safety shield. Tractors: M
& MD, Super M & MTA. Shield
comes primed. Manufactured to
restoration standards.
66424DBX
P.T.O. safety shield for
independent power take off.
Tractors: 300, 330, 340, 350,
400, 450. Shield comes painted.
Manufactured to restoration
standards.
360181R91
Transmission Parts For
Farmall H & M Series Tractors
REPLACES
ST293 Rear main shaft ball bearing.
Tractors: H.
Rear shaft ball bearing. Tractors:
H, Super H.
ST206
Rear countershaft ball bearing.
Tractors: H, Super H.
ST202
Oil seal, driving shaft. Tractors:
H, Super H. Replaces 79634H.
383159R91
Oil seal, countershaft. Tractors:
H, Super H. Replaces 43308D.
71701C1
Oil seal, countershaft. Tractors:
M, MD, Super M, Super MD.
Replaces 50839D.
381907R91
IH-4-196www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
4POWER TRAIN
Replacement parts to fit
I.H.C.
HI/LO (range) Transmission Repair Parts & KitsREPLACES
06 Series Models 706, 806, 1206 (1963 - 1967)Application:
The reverse shift pivot arm, although equipped with a detent roller, is subject to wear and
cuts into the mounting dowel. Also, vibration causes the center pivot to wear rapidly,
resulting in being unable to properly adjust shift linkage.
Problem:
Replace worn pivot arm and detent roller. Order part number 380312KIT.Solution:
As above, vibration and excessive shifter linkage travel allow the detent roller to wear into
the control arm dowel.
Problem:
Replace control arm and detent roller. Order part number 382565KIT.Solution:
Also availible: The "Speed" transmission is not illustrated for the "06 Series" tractors. For this top cover, also availible is the 382565KIT control
arm and detent roller kit. This kit also works in the "Speed" transmission on all "06 Series" tractors. This is an excellent solution whenever any
looseness or sloppy shifting in the "Speed" transmission lever is noticed.
380312KIT Pivot arm kit. Contains 380312R13 (Ref. 1) reverse pivot arm (1), 380115R2 (Ref. 2) detent roller (1).
Control arm kit. Contains 382565R21 (Ref. 4) control arm (1), 380115R2 (Ref. 2) detent roller (1),
383997R1 (Ref. 7) tension spring (1).
382565KIT
IH-4-197www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
4POWER TRAIN
Replacement parts to fit
I.H.C.
HI/LO (range) Transmission Repair Parts & KitsREPLACES
56 Series Tractor Models: 756, 856, 1026, 1256, 1456, (1968 thru 1971).Application:
The splined upper shaft (398281R3), & arm assembly (398285R2) wear out at both inside
and outside splines. This is due to the inherent vibration of the machine, especially when
cab mounts are worn.
Problem:
Replace worn shifter components. Order part number 398285KIT HI/LO shifter kit.Solution:
The control arm (398300R1) & detent roller (380115R2) wear rapidly due to vibration and
linkage misadjustment.
Problem:
Replace worn arm and roller. Order part number 398300KIT control arm kit. Kit also includes
spring (398304R1).
Solution:
Also availible: 398297R1 lower reverse shifter shaft.
398285KIT Hi/Lo shifter repair kit. Contains 398281R3 (Ref. 1) shaft (1), 398285R2 (Ref. 2) arm (1), 591184R1 pin
(1), 25532R1 washer (1).
Control arm repair kit. Contains 380115R2 roller, 398300R1 arm, 398304R1 spring.398300KIT
Hi/Lo shifter- control arm complete kit. Contains 398285KIT, 398300KIT, 398281R3 shaft (1), 398285R2
arm (1), 591184R1 pin (1), 25532R1 washer (1), 380115R2 roller (2), 398300R1 arm (2), 398304R1 spring
(1).
IH5686KIT
IH-4-198www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
4POWER TRAIN
Replacement parts to fit
I.H.C.
Speed Transmission Repair Parts and KitREPLACES
56 Series Tractor models: 756, 856, 1026, 1456 (1968-1971) Early 66 Series Tractor models:
766 prior to S/N 17047, 966 prior to S/N 3222, 1066 prior to S/N 57646, 1466 prior to S/N 30001,
all 1468 (1971-1976)
Application:
A cam pivot mechanism is used to move the gear shifter forks. To positively control this cam, a
control arm, roller detent, and spring are used. The control arm assembly is subject to wear out due
to vibration and misadjustment of the linkage. The detent roller wears out and is often cocked at
an angle causing uneven wear on the dowel on which the roller is mounted.
Problem:
Replace the roller, the control arm, and the tension spring. All three pieces are availible in a kit.
Order part number 382565KIT (see below for full contents listing). Detent roller 380115R2 is used
in both
Solution:
382565KIT Control arm repair kit. Contains 382565R21 control arm, 380115R2 roller, 383997R1 spring, tension.
Detent Roller (Available only as standard package of 5 pieces)380115R2
IH-4-199www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
4POWER TRAIN
Replacement parts to fit
I.H.C.
Hi/Lo Transmission (Range transmission) Repair Parts & KitsREPLACES
66 Series Tractor models: 766 after S/N 17047, 966 sfter S/N 32222, 1066 after S/N 57646, 1466
after S/N 30001, All 1566 (1971-1976)
Application:
86 Series models: 786, 886, 986, 1086, 1486, & 1586 (1976-1981)
88 Series models: 3088-3788, 6388-6788 (1981-1985)
Vibration and linkage misadjustment can cause the shifter lever (71531C1 or 120261C2) attaching bolt
to loosen. This allows the mounting hole and the mating surface of the shifter shaft (71526C1) to
become rounded and worn. Replacing with new OEM parts may cure the problem short-term. However,
the components will again quickly wear out in the same areas.
Problem:
A totally redesigned assembly is now availible. The shaft is 1/4" longer, the lever is 1/4" thicker and
has a split clamp and bolt design. In addition, a groove pin is driven through both the lever and the
shaft. This gives the double assurance of positive fit, alignment, and vibration resistance. Order
71526KIT Hi/Lo Shifter Kit.
Solution:
Also Availible: 398300KIT (see below for contents) is availible to replace worn control arms, detent
rollers, and tension springs.
71526KIT Hi/Lo shifter repair kit. Contains 71526C1SP shaft, 71531C1SP bar.
Transmission Kit
Control arm repair kit. Contains 380115R2 roller, 398300R1 arm, 398304R1 spring.398300KIT
Hi/Lo shifter and control arm kit. Contains 71526KIT, 398300KIT, 71526C1SP shaft, 71531C1SP bar,
398300R1 arm, 380115R2 roller, 398304R1 spring.
IH6688KIT
IH-4-200www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
4POWER TRAIN
Replacement parts to fit
I.H.C.
Speed Transmission Repair Parts and KitREPLACES
66 Series Tractor models: 766 after S/N 17047, 966 sfter S/N 32222, 1066 after S/N 57646, 1466
after S/N 30001, All 1566 (1971-1976)
Application:
86 Series models: 786, 886, 986, 1086, 1486, & 1586 (1976-1981)
88 Series models: 3088-3788, 6388-6788 (1981-1985)
A cam pivot mechanism is used to move the gear shifter forks. To positively control this cam, a
control arm, roller detent, and spring are used. The control arm assembly is subject to wear out
due to vibration and misadjustment of the linkage. The detent roller wears out and is often cocked
at an angle causing uneven wear on the dowel on which the roller is mounted.
Problem:
Replace the roller, the control arm, and the tension spring. All three pieces are availible in a kit.
Order part number 382565KIT.
Solution:
Spring loaded turnbuckle-equipped park lock linkage kit. Order part number 390856KIT. The spring
loaded center section allows easier, more positive engagement of the park lock mechanism. Also
eliminates frequent adjustment and wear.
Also availible:
382565KIT Control arm repair kit. Contains 382565R21 control arm, 380115R2 roller, 383997R1 spring, tension.
Park lock repair kit. Contains 390856R1SL turnbuckle, 390857R1 LH threaded rod, 390858R1 RH
threaded rod.
390856KIT
IH-4-201www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
4POWER TRAIN
Replacement parts to fit
I.H.C.
Front Wheel Bearing Kits
Kits contain inner & outer cone & cup, oil seal & felt washer
where required, complete for one wheel
REPLACES
Bearing kit for front wheel tractor, contains
(15580) inner cone, (15520) inner cup, (17580)
outer cone, (17520) outer cup, (350768R1) felt
washer. Tractors: Cub & Cub Lo-Boy.
FW116FS
Felt washer350768R1
Bearing kit for front wheel tractor, contains inner
cone (15118), inner cup (15250), outer cone
(09074), outer cup (09196), oil seal (43463D),
felt washer(49118DA & 55453D). Tractors: A,
Super A, B, C, Super C, 100, 130, 200, 230.
FW101FS
Contents of FW101FS:
Inner cone (15118)54631H
Outer cone (09074)13823V
Oil seal43463D
Felt washer 2-1/2" x 1-5/8" x 7/16"49118DA
Felt washer 2-3/8" x 1-7/8" x 3/16"55453D
Bearing kit, for front wheel. Tractors: H, Super
H, M & MD, 4, Super W4, 300, 350.
FW113FS
Contents of FW113FS:
Inner cone, 1.375" I.D. (14138A)ST2049
Inner cup, 2.717" O.D. (14274)ST974
48702D
Oil seal, 1-3/4" I.D. x 2-13/16" x 5/16"48539DA
Outer cone, .937" I.D.1779-TIM
Outer cup, 2.240" O.D.1729-TIM
Bearing kit, for front wheel. Tractors: 140, 240,
330, 340, F504, dual wheel.
FW105S
Contents of FW105S:
Inner cone (LM67048)651818R91
Inner cup (LM67010)651817R1
Outer cone (LM11949)651815R91
Outer cup (LM11910)651814R1
Oil seal (replaces 368629R91)372440R91
Bearing kit for front wheel. Tractors: HV, Super
HV, MV & MDV, O6, ODS6, W6, WD6, Super
W6 & WD6, 400, 450.
FW112FS
Contents of FW112FS:
Inner cone, 1.625" I.D. (342S)ST781A
Inner cup, 3.149" O.D. (332)ST882
Outer cone, 1.375" I.D. (2878)ST771A
Outer cup, 2.875" O.D.2820-TIM
Oil seal, 2.063" O.D. x 3.250" I.D. x .294" W48704DA
Felt dust seal15288A
Bearing kit, for front wheel. Tractors: 460
(except hi-clear), 504, 606 & 2606 (std. front
axle).
FW119FS
Contents of FW119FS:
Inner cone (LM48548)618023R91
Inner cup (LM48510)618024R1
Outer cone (M12649)371882R91
Outer cup (M12610)371883R1
Oil seal, 1-3/4" I.D. x 2-13/16" x 5/16"48539DA
Bearing kit, for front wheel. Tractors: 460
hi-clear, 560, 606, 2504, 2606 (H.D. front axle),
706, 806, 2706, 2806.
FW120FS
Contents of FW120FS:
Inner cone (LM603049)619386R91
Inner cup (LM603011)619387R1
Outer cone (LM48548)618023R91
Outer cup (LM48510)618024R1
Oil seal370254R91
IH-5-202www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
I.H.C.
Bearing kit, for front wheel. Tractors: Hydro 70
& 86 (w/adjustable axle), Hydro 100 & 186,
Farmall 460 Hi-clear, 460 & 504 (w/HD axle),
Farmall 544 (w/HD axle), International 544 (w/std
axle, s/n 14195 & up; w/HD axle, prior to s/n
14194), 560 & 606 (w/HD axle), 656 w/adjustable
axle w/HD knuckles and all hi-clear), 656 (std
duty knuckle, prior to s/n 13199), 660, 664, 666
(w/adjustable axle), 686 (w/adjustable axle), 706,
756, 766, 786, 806, 826, 856, 886, 966, 986,
1026, 1066, 1086, 1206, 1256, 1456, 1466,
1468, 1486, 1566, 1568, 1586, 3088, 3288,
3488, 3688, 5088, 5288, 5488. Industrials:
2544, 2608, 2656, 2706, 2756, 2806, 2826,
2856, 21026, 21206, 21256, 21456.
371418R91
Contents of 371418R91:
Inner cone (LM603049)619386R91
Inner cup (LM603011)619387R1
Outer cone (LM48548)618023R91
Outer cup (LM48510)618024R1
Oil seal370254R91
Retainer48703D
Gasket369860R1
Front wheel bearing kit (contains Timken
bearings). Tractors: Hydro 70 & 86 (with
adjustment axle), Hydro 100 & 186, Farmall 460
Hi-Clear, International 460 & 504 (with HD axle),
Farmall 544 (with HD axle), International 544
(with standard axle, to s/n 14194), 560, 606 (with
HD axle), Farmall 656 (adjustable axle with HD
knuckles and all Hi-clear), International 656
(standard duty knuckle, to s/n 13199), 660, 664,
666 (with adjustable axle), 686 (with adjustable
axle), 706, 756, 766, 786, 806, 826, 856, 886,
966, 986, 1026, 1066, 1086, 1206, 1256, 1456,
1466, 1468, 1486, 1566, 1568, 1586, 3088,
3288, 3488, 3688, 5088, 5288, 5488.
Industrials: 2544, 2608, 2656, 2706, 2756,
2806, 2826, 2856, 21026, 21206, 21256, 21456.
TKR7
Contents of kit TKR7:
(1) 48703D retainer
(1) 370254R91 oil seal
(1) 369860R1 gasket
(1) LM48510-TIM bearing cup
(1) LM48548-TIM bearing cone
(1) LM603011-TIM bearing cup
(1) LM603049-TIM bearing cone
Wheel Clamp Lock Nut
For axle shaft and front wheel. No re-threading necessary
on worn shafts.
Directions: Put on inside sleeve nut (A) and adjust to suit
bearing; hold with wrench to position while screwing on
outside ring nut (B) very tight. Picture (C) shows the lock
nut complete.
REPLACES
5/8"-18 thread. Fits front wheel. Tractors: A, B,
C, 100, 130, 200, 230, 240, 330, 340.
LN10-1
7/8"-14 thread. Fits front wheel. Tractors: H,
Super H, M, Super M, B275, 300, 350, 400, 450,
460, 560.
LN10-5
Steering Universal JointREPLACES
Complete joint w/yokes, pins & grease fittings.
Fits 7/8" diameter shaft. Tractors: H, M, Super
M, 300, 350, 400, 450.
USJ78
Steering ArmsReplacement front end parts for various IHC (Farmall) wide
front end tractors.
REPLACES
Steering Arm. Left Hand Splined. Tractors:
Hydro 100, 756 (s/n 13415 & up), 766, 786, 856
(s/n 18257 & up), 886, 966, 986, 1066, 1086,
1466, 1468, 1486, 3088, 3288, 3688.
531248R2
Steering Arm. Right Hand Splined. Tractors:
Hydro 100, 756 (s/n 13415 & up), 766, 786, 856
(s/n 18257 & up), 886, 966, 986, 1066, 1086,
1466, 1468, 1486, 3088, 3288, 3688.
531249R2
IH-5-203www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
I.H.C.
Front Axle Tie Rod PartsREPLACES
Tie rod end, outer, notched (6) on bottom,
13-3/4" to center of post, .750" rod dia. Used on
tie rod assemblies with notched outer end and
threaded inner end. For swept back adjustable
axles 44" to 72". Tractors: 454, 464.
65074C91
Tie rod end, outer, notched (7) on bottom,
15-7/8" to center of post, .750 rod dia. Used on
tie rod assemblies with notched outer end and
threaded inner end. For swept back adjustableaxles 48" to 80". Tractors: 454, 464, 484
(w/1-7/16" outside diameter spindle post).
65077C91
Tie rod end, inner, threaded (Right hand), 3-1/8"
to center of post, .687"- 18 thread. Used on tie
rod assemblies with notched outer end and
threaded inner end. For swept back adjustableaxles 44" to 72". Tractors: 454, 464. (48" to 80").
Tractors: 454, 464, 484 (with 1-7/16" O.D.
spindle post, 45" to 61"). Tractors: 424, 444. 49"
to 69". Tractors: 424, 444. Also used as an
outer tie rod end on models with swept backaxles. Tractors: 330, 340, 404. Models with
straight axles. Tractors: Supers A & A1 (s/n
318310 & up), Super AV & AV-1 (s/n 318914 &
up), C, Super C, Cub Lo-Boy (w/105 mower),
100, 130, 140, 404, 504.
356540R91
Tie rod end, outer, notched (7) at bottom, 15-7/8"
to center of post, .750 rod dia. Used on tie rod
assemblies with notched outer end and threaded
inner end. For swept back adjustable axles48" to 80". Tractors: 385, 395, 484 (w/ 1-11/16"
outside diameter spindle post), 485, 574, 584,
594. 56" to 76" on Tractors: 2400A, 2500A.
65082C91
Tie rod end, outer, notched {6}, 15" to center of
post. Used on tie rod assemblies with notched
outer end and threaded inner end. For straight
adjustable axles 48" to 80". Tractors: 574, 594,
(52" to 80"). Tractors: Hydro 84, 385, 395, 484,
485, 584 (except utility w/HD axle), 684, 784,
884 (54" to 78"). Tractors: 674. Three position
axle. Tractors: 2400A, 2500A.
65079C91
Tie rod end, inner .687"- 18 RH thread, 3-1/8" to
center of post. Used on tie rod assemblies with
notched outer end threaded inner end. Forswept back adjustable axles. 48" to 80" on
Tractors: 385, 395, 484 (w/ 1-11/16" outside
diameter spindle post), 485, 574, 584, 594. 56"
to 76" on Tractors: 2400A, 2500A. For straightadjustable axles. 48" to 80" on Tractors 574.
52" to 80" on Tractors: Hydro 84, 385, 484, 485,
584, 684, 784, 884. 54" to 78" on Tractors: 674.
Three position axle on Tractors: 2400A, 2500A.
527658R91
Tie rod end, outer, recess for set screw (6) on
bottom, 14-1/8" to center of post, .842" rod dia.
Used on tie rod assemblies w/set screw recess
outer end and threaded inner end. For straightadjustable axles. 52" to 77" Tractors: Hydro
84, 595, 684, 685, 695, 784, 884, 885, 895, 995.
52" to 80" on Tractors: 584 utility (w/HD axle),
594. 52" to 82" on Tractors: 595, 685, 695, 885,
895, 995 (w/low spindles).
3125171R2
Tie rod end, outer, recess for set screw (7) at
bottom, 15" to center of post, .812" rod dia. Used
on tie rod assemblies w/set screw recess outer
end and threaded inner end. For straightadjustable axles. 52" to 80" on Tractors: Hydro
84, 385, 395, 396, 484, 485, 495, 584 (except
utility w/HD axle), 684, 784, 884. 52" to 82" on
Tractors: 595, 685, 695, 885, 895, 995 (w/high
spindles).
3116406R3
IH-5-204www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
I.H.C.
Tie rod end, inner, .875"- 16 RH thread, 3-7/8" to
center of post. Used on tie rod assemblies w/set
screw recess outer end & threaded inner end.
For swept back adjustable axles. 48" to 80"
on Tractors: 395, 396, 495, 595, 685, 695, 885,
895, 995. For straight adjustable axles. 52" to
77" Tractors: Hydro 84, 595, 684, 685, 695, 784,
884, 885, 895, 995. 52" to 80" on Tractors:
Hydro 84, 385, 395, 484, 485, 495, 584, 584
utility (w/HD axle), 594, 684, 784, 884. 52" to 82"
on Tractors: 595, 685, 695, 885, 895, 995.
3116407R3
Tie rod end, 1.0"- 16 RH thread, 3-7/8" to center
of post. For front wheel drive axles. Tractors:
Hydro 100, Hydro 186 (prior to s/n 11079), 544,
560, 656, 660, 666, 686, 706, 756, 786, 806,
826, 856, 886, 966, 986, 1026, 1066, 1086,
1206, 1256, 1456, 1466, 1468, 1486, 1566,
1568, 1586 (prior to s/n 21216), 3088, 3288,
3688, 5088, 5288, 5488. Also used as a drag link
end, RH thread, for all wheel drive rear axle
steering drag link. Tractors: 4156, 4166, 4186.
Tie rod end, RH, threaded. Same application as
359984R93 and 383917R1. Not for drilled style
TRW tie rod parts. (Ref. D)
384006R92
Tie rod end, LH or RH. Notched (6) on top,
15-3/4" to center of post, .920" rod dia. Foradjustable front axles. 56" to 80" on Tractors:
300, 350, 400, 450, 460, 544, 560, 656, 660,
666, 686, 706, 756, 806, 826, 856, Hydro 70 &
86. 58" to 82" on Tractors: Hydro 100, 766, 786,
886, 966, 986, 1026, 1066, 1086, 1206, 1256,
1456, 1466, 1468, 1486, 1566, 1568, 1586,
3088, 3288, 3688, 5088, 5288, 5488. Not for
drilled style TRW tie rod parts.
359984R93
Tie rod tube. 18" long, .950" I.D., .941" I.D.
thread. 2 slots one end, threads other end.
Tractors: 544, 656, 666, 686, 706, 756, 806,
826, 856, 1026, Hydro 100, Hydro 186, 966, 986,
1026, 1066, 1086, 1206, 1256, 1456, 1466,
1468, 1486, 1566, 1568, 1586, 4156, 4166,
4186, 766, 786, 886, 1468, 3088, 3288, 3688,
5088, 5288, 5488. Not for drilled style TRW tie
rod parts.
383917R1
Universal tie rod boot. 1.300" base x .965" height
x .500" hole I.D. Vintage Iron™UTRB
Spindle AssembliesREPLACES
Spindles assembly, front RH, (Vertical shaft
9.750"). Tractors: B275, B276, 354, 364, B414,
B434. Industrials: 2300.
3043865R1
Spindles assembly, front LH, (Vertical shaft
9.750"). Tractors: B275, B276, 354, 364, B414,
B434. Industrials: 2300.
3043864R1
IH-5-205www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
I.H.C.
Steering WheelsREPLACES
404601R1 Steering wheel, 16". Covered
spokes. Tractors: Serviceable for
Cub Lo-Boy 154, Cub Lo-Boy 184,
Cub Lo-Boy 185, Cub Cadet 982
(s/n 665001 & up), Cub Cadet
1872, Cub Cadet 2072. VintageIron™
Steering wheel OEM style,
14-3/4" diameter, 3/4" hub for
keyed shaft, Metal Spokes.
Tractors: Cub & Cub Lo-Boy, A,
Super A (prior to s/n 355669), B,
C (prior to s/n 75097). VintageIron™
60069D-OE
Steering wheel OEM style,
17-5/8" diameter, 3/4" hub for
keyed shaft, Metal Spokes.
Tractors: Super A (s/n 356000 &
up), C (s/n 75098 & up), Super C,
H, Super H, M, MD, 4, 6, Super
W6 & WD6, W9, WD9, Super
WD9, 100, 130, 200, 230, 240,
300, 400. Vintage Iron™
60070D-OE
Steering wheel. 17-3/8" diameter,
7/8"- 36 splined hub. Tractors:
140, 350, 404, 424 (w/o P.S), 44
(w/o P.S), 450, W450, 460, 504,
560, 2404, 2424 (w/o P.S), 2444
(w/o P.S), 4100, 4156, 4166,
4186. Combines: 105, 203, 205
(prior to s/n 1289). VintageIron™
366557R2
Steering wheel, 16" diameter for
tractors with power steering.
Tractors: Hydro 70, Hydro 84,
Hydro 86, Hydro 100, Hydro 186,
Hydro 3488, 404, 424, 444, 454,
464, 484, 504, 544, 574, 584,
606, 656, 664, 666, 674, 684,
686, 706, 756, 766, 784, 786,
806, 826, 856, 884, 886, 966,
986, 1026, 1066, 1086, 1206,
1256, 1456, 1466, 1468, 1486,
1566, 1568, 1586, 2400, 2500,
3088, 3220, 3230, 3288, 3388,
3588, 3688, 3788, 4386, 4586,
4786, 5088, 5288, 5488, 6388,
6588, 6788. Vintage Iron™
385156R1
Cap, for steering wheel
385156R1. Tractors: Hydro 70,
Hydro 84, Hydro 86, Hydro 100,
Hydro 186, Hydro 3488, 404, 424,
444, 454, 464, 484, 504, 544,
574, 584, 606, 656, 664, 666,
674, 684, 686, 706, 756, 766,
784, 786, 806, 826, 856, 884,
886, 966, 986, 1026, 1066, 1086,
1206, 1256, 1456, 1466, 1468,
1486, 1566, 1568, 1586, 2400,
2500, 3088, 3220, 3230, 3288,
3388, 3588, 3688, 3788, 4386,
4586, 4786, 5088, 5288, 5488,
6388, 6588, 6788. VintageIron™
68837C3
Steering wheel, 3 spoke
(covered). 13" diameter, 11/16"
40 spline hub. Tractors: Cub
Cadet 100, 102, 122, 123.
Vintage Iron™
385734R1
Steering wheel, 4 spoke. 20"
diameter, 3/4" shaft. Keyed &
tapered hub. Tractors: M, MV,
MD, MDV, Super MDV, Super M,
Super MV, Super MD, W9, WD9,
I9, ID9, WR9, 400, 450, 600, 650.
Vintage Iron™
557282R91
Steering wheel, 3 spoke
(covered). 16" diameter, 3/4"
keyed shaft. Tractors: late O12
& O14, late I12 & I14, late W12
& W14; late F12, F14 (1938 to
1939); early A, AV, B, BN (to
mid-1940). Also fits late F20 &
F30 (1937); M, MD, MDV, MV,
H, HV (1939 to mid-1940) if 16"
dia wheel is desired. VintageIron™
29118DC
Cap for tilt steering wheel.
Tractors: 706, 756, 766, 806,
826, 856, 966, 1026, 1066, 1206,
1256, 1456, 1466, 1468, 1566,
1568, 2706, 2806. For use with
400217R1 steering wheel.
Vintage Iron™
400220R1
Steering wheel cap. For use on
splined steering shafts and power
steering. Tractors: Late 140,
240, 300, 330, 340, 350, 400,
404, 424, 444, Farmall 450,
W450, 460, 504, 560, 660, 3414,
4100, 4156, 4166, 4186. VintageIron™
366566R1
IH-5-206www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
I.H.C.
Steering wheel, tilt. 16" diameter,
7/8"- 36 splined hub. Tractors:
706, 756, 766, 806, 826, 856,
966, 1026, 1066, 1256, 1456,
1466, 1468, 1566, 1568, Hydro
100. Use cap 400220R1. VintageIron™
400217R1
Steering wheel plate. Tractors:
H, HV, M, Super M, MD, Super
MD, MV, Super MV, MDV, Super
MDV, MTA, 300, 350, 400, 450,
600, 650, W400, W450. VintageIron™
TP-F1744R
Bolts & NutsREPLACES
453769R2 Stud, 1/2" X 1-3/4" NF, for 6 hole
front wheel hub, except tractors
with cast swept back axle or front
wheel drive. Tractors: Hydro 84,
385, 395, 484, 485, 495, 574,
584, 585, 595, 674, 684, 685,
695, 784, 884, 885, 895, 995.
Replaces 528803R1. Use with
nut 453770R1.
Nut, 1/2" NF, use with front
wheel stud 453769R2. Tractors:
Hydro 84, 385, 395, 484, 485,
495, 574, 584, 585, 595, 674,
684, 685, 695, 784, 884, 885,
895, 995. Replaces 483879R1.
453770R1
Bolt, 1/2" X 1-5/8" NF, for six hole
front wheel hub. Tractors: 354,
364, 384, B414, 2300A.
3047573R1
Stud, 5/8" X 1-15/16" NF, rear
wheel to axle, except 4 wheel
drive tractors. For eight hole
flange type axle. Tractors: Hydro
84, 384 (s/n 2097 & up), 385,
395, 464, 484, 485, 495, 574,
584, 585, 595, 674, 685, 695,
784, 884, 885, 895, 995. Use
with nut 3047575R2.
404341R3
Nut, 5/8" NF, use with rear wheel
stud 404341R3. For eight hole
flange type axle. Tractors: Hydro
84, 384 (s/n 2097 & up), 385,
395, 464, 484, 485, 495, 574,
584, 585, 595, 674, 685, 695,
784, 884, 885, 895, 995.
3047575R2
Hex Jam NutREPLACES
114499 Slotted hex jam nut 3/4" N.F. for
steering shaft rear. Tractors: A,
B, H & HV, Super H & HV; M &
MD, Super M & MTA, O4, OS4,
W4, Super W4, W6, WD6, Super
W6 & W6TA, W9, WD9, WR9,
WDR9.
Rear Wheel RimsREPLACES
114717C1 Rim assembly, 7" wide, 24"
diameter with four mounting
clamps. For single rear wheels
with 7-24", 8.3/8-24" or 9.5/9-24"
tires. Tractors: Cub, Cub Lo-Boy.
Rim assembly, 9" wide, 24"
diameter with four mounting
clamps. For 11.2/10-24" or
12.4/11-24" tires. Tractors: A,
Super A, B, C, 100, 130, 140.
Replaces 56205DB.
114713C1
Rim assembly, 10" wide, 28"
diameter with six mounting
clamps. For 12.4-28" or 13.6-28"
tire. Tractors: 454, 464, 674,
240A.
361700R92
Power Steering CylinderREPLACES
188842A1 Power steering cylinder
complete, with 1" diameter shaft.
International Tractors: 385, 454,
464, 474, 484, 485, 574, 584,
585, 674, 684, 685, 784, 884,
885, 2400, 2500, Case/IHTractors: 385, 395, 485, 495,
585, 595, 685, 695, 885, 895,
995, 3220, 3230, 4210, 4230,
4240. Replaces 549667R91.
Dust Boot. Universal, 1.200" base
x .475" height x .500" hole I.D.
185452M1
Power steering cylinder
assembly. Hydraulic power
steering. Tractors: 766, 966,
1066, 1466, 1468, 1566, 1568,
Hydro 100.
533279R94
IH-5-207www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
I.H.C.
REPLACES Hydraulic Coupler Tips &
AdaptorsTISCO supplies many of the hydraulic tips & adaptors
manufactured by both Pioneer & Safeway. The dual listing
below shows the interchange.
Note: Tips will fit all 1/2" female bodies. Uses Pioneer
#5209-4 dust plug or equivalent
Safeway
Number
Pioneer
Number
Description
S25-4-24070-4
Adapts standard male
tip to late series IHC
female coupler
S25-4-44067-4
Adapts John Deere
male tip to late series
IHC female coupler
S25-4-54076-4
Adapts late series IHC
male tip to John Deere
female coupler
S25-4-74075-4
Adapts IHC late series
tip to standard female
coupler
4075-4L
Specially designed
long adaptor. Adapts
IHC male tips to 50
series John Deere
tractors. Converts IH
tips to new I.S.O. with
out tools. Also adapts
IH to Ford female
bodies.
1272770C1Male tip with ball
valve. 1/2" NPTF, 2500
PSI, 1-1/16" hex size. 8010-4
8010-15
Male tip with ball
valve. 3/4"-16 O-ring
boss, 2500 PSI, 1-1/16"
hex size.
8010-16
Male tip with ball
valve. 7/8"-14 O-ring
boss, 2500 PSI, 1-1/16"
hex size.
395151R1
IHC male tip (old
style), 1/2" NPT
5077-4thread, used with
395152R91.
5077-16
IHC male tip (old
style), 7/8"-14 ORB
thread, used with
395150R91.
Safeway
Number
Pioneer
Number
Description
S12-45070-4
IHC male tip (new
style), 1/2" NPT
thread.
5070-16
IHC male tip (new
style), 7/8"-14 ORB
thread, Replaces
544787R91.
S25-4-21P4057-4
IHC female coupler
half, 1/2" NPT thread.
Accepts new series
IHC male tips.Will not
work with 395151R91.
S25-16-21
IHC female coupler
half, 7/8"-14 ORB
thread. Accepts new
series IHC male tips.
Replaces 544788R1.
Break-Away ClampREPLACES
Double break-away clamp. For use with IHC
female coupler half S25-4-21P or S25-16-21.
S42-4-21
ISO Conversion Kit
Upgrade your International tractor to accept ISO male tips.
Installation is simple and fast with this Pioneer 8700 Series
Conversion Kit.
REPLACES
Pioneer 8700 Series Conversion Kits for
International Harvester tractor models 1971 to
1983. Contains: 2-cartridge body assemblies,
2-cap screws, 2-diameter washers, 2-snap rings,
2-automatic dust caps, 4-seals and assembly
instructions.
8700
IH-6-208www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
6HITCH AND
HYDRAULICS
Replacement parts to fit
I.H.C.
Hydraulic Hose Interchange
List
NOTE: TISCO hose has solid male fittings on both ends.
1/2" I.D. single-wire braid (SAE-1R) 1/2" NPTsolid male fitting both ends
REPLACES
OEM #Overall LengthReplaces
407079R9124"H41-2M-24
407080R9136"H41-2M-36
407081R9148"H41-2M-48
407082R9160"H41-2M-60
407083R9172"H41-2M-72
407084R9184"H41-2M-84
407085R91108"H41-2M-108
407086R91120"H41-2M-120
407448R1144"H41-2M-144
1/2" I.D. double wire braid (SAE-2R) 1/2" NPTsolid male fittings both ends
REPLACES
OEM #Overall LengthReplaces
407435R124"H42-2M-24
407436R136"H42-2M-36
407437R148"H42-2M-48
407438R160"H42-2M-60
407439R172"H42-2M-72
407440R184"H42-2M-84
407441R196"H42-2M-96
407442R1108"H42-2M-108
407443R1120"H42-2M-120
407444R1132"H42-2M-132
407445R1144"H42-2M-144
Hydraulic Oil FilterREPLACES
Hydraulic oil filter, for gear drive tractors with
pumps up to 12 gpm. Not for hi-capacity power
supply. Tractors: 340, 460, 504, 544, 560, 606,
656, 660, 664, 666, 686.
388084R93
REPLACES Individual Tongs For Fast
HitchFor Converting IHC fast
hitch from 2-Point to
3-Point
Straight tong with combination ball socket:
Left hand tong with combination ball socket.
Replaces FH14411. Cat. I & II. Overall length
27-7/8", 26" pin spacing.
FH1447
Right hand tong assembly with combination ball
socket. Replaces FH14412. Cat. I & II. Overall
length 27-7/8", 26" pin spacing.
FH1448
Formed tong with combination ball socket:
Left hand formed tong assembly with
combination ball socket. For speedy conversion
to Cat. I or II ball, 32" pin spacing.
FH14416
Right hand formed tong assembly with
combination ball socket. For speedy conversion
to Cat. I or II ball, 32" pin spacing.
FH14417
DrawbarsREPLACES
Drawbar, swinging style 1" thick, 52-1/4" center
to center. Tractors: M, MD, Super M, and Super
MD. Manufactured to restoration standards.
357529R1
Drawbar, swinging style 3/4" thick, 50-1/2" center
to center. Tractors: H & Super H. Manufactured
to restoration standards.
357530R1
Pin, swinging drawbar (formed). Tractors: H,
Super H, M, Super M, 300, 330, 340, 350, 400,
450, 460, 560, 660.
FOH450
IH-6-209www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
6HITCH AND
HYDRAULICS
Replacement parts to fit
I.H.C.
Hydraulic PumpREPLACES
70933C91 Hydraulic pump, in rear frame for
power supply. 12 GPM pump.
Tractors: Hydro 100, Hydro 186,
766, 786, 886, 966, 986 (prior to
s/n 23999 & s/n 28000 & up),
1066, 1086 (prior to s/n 47999 &
s/n 55000 & up), 1466, 1468,
1486 (prior to s/n 25999 & s/n
29150 & up), 1566, 1568, 1586
(prior to s/n 20999). Replaces
70931C91, 70194C91,
373964R94, 374483R96.
Pump assembly, hydraulic power
supply gear 12 GPM pump.
Tractors: 395, 454, 464, 484,
485, 495, 574, 584, 585, 595,
674, 684, 685, 695, 784, 884,
885, 895, 995, 3220, 3230, 4210,
4230, 4240. Replaces 66513C92,
110509C91, 128180C91,
406763R92.
93835C92
Hydraulic pump, in rear frame for
power supply, 15 GPM pump. For
tractors with high capacity power
supply attachment. Tractors:786, 886, 986 hi clear to s/n
23999 and 28000 & up, 1066 hi
clear to s/n 47999 and 55000 &
up, 1486 to s/n 25999 and 29150
& up, 1566, 1568, 1586 to s/n
20999, 3088, 3288, 3688 with
draft control and or auxiliary
valves.
70932C91
Hydraulic pump, for power
supply. 17 GPM, 2050 psi.
Tractors: Hydro 70, Hydro 86,
Hydro 186 (s/n 12000 & up), 666,
686, Hydro 3488.
70935C91
Hydraulic pump, on clutch
housing for power supply.
Tractors: 786, 886, 986, 1086,
1486, 1586, 3088, 3288, 3688.
Replaces 133441C92.
120114C92
Hydraulic pump, on clutch
housing for power supply and
multiple control value. Tractors:
4166, 4186. Replaces
133440C92.
527397R93
ShieldsREPLACES
Shield, hydraulic hose control valve. Tractors:
H, HV, Super H, Super HV. Shield comes
painted. Manufactured to restoration standards.
353113R1
Linch PinsREPLACES
Heavy duty linch pin. 7/16" diameter X 1-7/8"
long, 1-5/8" inside diameter ring.
392181R91
Three Point Hitch PartsREPLACES
Leveling box screw with bevel gear RH. (.875"
dia. 14.375" long). Tractors: 385, 395, 454, 464,
484, 485, 495. Industrials: 2400A.
69991C91
Leveling box screw with bevel gear. (875" dia.
15.875" long). Tractors: 574, 674. Industrials:
2500A. Replaces 527945R91.
69992C91
IH-6-210www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
6HITCH AND
HYDRAULICS
Replacement parts to fit
I.H.C.
Leveling box screw with bevel gear. (.875" dia.
16.625" long). Tractors: Hydro 84, 574 row crop,
584 row crop, 585 bar type rear axle, 595 bar
type rear axle, 674 row crop, 684, 685 bar type
rear axle, 695 bar type rear axle, 784 row crop,
884 row crop, 885 bar type rear axle, 895 bar
type rear axle, 995 bar type rear axle. Replaces
69988C1, 527939R1.
69993C91
Leveling box screw with bevel gear RH. (.875"
dia, 18.125" long). Tractors: 395, 495, 584 utility,
585 flange type rear axle, 595 flange type rear
axle, 685 flange type rear axle, 695 flange type
rear axle, 784 utility, 884 utility, 885 flange type
rear axle, 895 flange type rear axle, 995 flange
type rear axle, 4210, 4230, 4240.
3116725R91
Leveling box screw assembly RH. (1.125" dia.
22.500" long). Tractors: Hydro 100, 756, 766,
806, 826, 856, 966, 1026.
397096R2
Leveling box screw assembly LH. (1.125" dia.
22.500" long). Tractors: Hydro 100, 756, 766,
806, 826, 856, 966, 1026.
397095R2
Housing, leveling screw. (16.375" long).
Tractors: Hydro 100, 1026, 1066, 1206, 1256,
1456, 1466, 1468, 1566.
398384R1
Housing, leveling screw. Cat I. (14.500" long).
Tractors: Hydro 84, 385, 395, 454, 464, 484,
485, 495, 574, 584, 585, 595 with fixed lower
link, 674, 684, 685 with fixed lower link, 695,
784 with fixed lower link, 895, 995 ; 3220, 3230
w/out telescopic lower link; 4210, 4230, 4240
w/out telescopic lower link.
3121964R91
Housing, leveling screw. (16.500" long). Used
with 397096R2 screw. Tractors: Hydro 100,
706, 756, 766, 806, 826, 856, 966, 1026, 1206.
396752R1
Crank handle for 3-point hitch. (Used on RH lift
arm adjuster series). Tractors: Hydro 70, Hydro
86, Hydro 100, 100, 130, 140, 404, 504, 544,
554, 606, 644, 656, 664, 666, 686, 706, 743,
744, 745S, 756, 766, 806, 826, 844, 844S, 845S,
856, 966, 1026, 1066, 1206, 1256, 1456, 1466,
1468, 1566, 1568.
523861R2
IH-6-211www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
6HITCH AND
HYDRAULICS
Replacement parts to fit
I.H.C.
Combine Grain Platform
Auger Parts
For 1/2" fingers Replaces original style finger guide
consisting of inner & outer metal retainers and pivot ball.
REPLACES
Kit, single guide. Improved poly type
replacement for all models using 150728C1. 1/2"
diameter finger. Contains poly guide and bolts.
Replaces CFHKIH12, 150720C1, 150723C1,
150726C1 and 150727C1.
FH8DMH
Package of 25 FH8DMH, bulk pack.FH8-25DMH
Corn Head Stalk Roll KnivesREPLACES
Stalk row knife for 900 and 1000 series corn
heads. 9 manufacturing holes. The knife is made
of special steel, 18" long, 2.22" wide, .215" thick,
approx. .025" heavier than original equipment
part. Cutting edge is precision milled to a 350°
angle. Backside of the cutting edge is tungsten
carbide coated for long wear.
1327126C1
Ear Corn DeflectorREPLACES
Deflector. Corn Heads: 800 series, 900 series.199097C2
Corn Head PartsREPLACES
800 Series824, 833, 834, 843, 844, 853, 854, 863, 864,
873, 874, 883, 884
Chain sprocket (non-relube)176283C91
Chain sprocket (greaseable)176283C91R
Chain, corn head gathering176279C91
Deck plate, corn head RH176292C91
Deck plate, corn head LH176291C91
Bearing156816C91
Corn deflector strip199097C2
Stalk roll knife176304C2
900 & 1000 Series943, 944, 954, 963, 964, 983, 984
Chain sprocket (non-relube)176283C91
Chain sprocket (greaseable)176283C91R
Chain, corn head gathering176279C91
Deck plate, corn head RH199381C91
Deck plate, corn head RH199382C1
Bearing156816C91
Corn deflector strip199097C2
Stalk row knife1327126C1
IH-7-212www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
7FORAGE ANDHARVESTING
Replacement parts to fit
I.H.C.
Idler Sprockets & PulleysREPLACES
155915C91 Sprocket, 8 teeth, 3/4" bore,
CA2060H chain. Corn Heads:
227, 228, 229, 327WN, 328WN,
329WN, 429WN, 430WN, 620N,
630N, 724, 733, 734, 743, 744,
762, 763, 764, 782. Used with
gathering chain 654164R91.
Sprocket, 8 teeth, 5/8" bore,
CA555 chain. Corn Heads: 824,
833, 834, 843, 844, 853, 854,
863, 864, 873, 874, 883, 884,
943, 944, 954, 963, 964, 983,
984. Used with gathering chain
176279C91.
176283C91
Sprocket, 15 teeth, 1/2" bore,
RC60 chain. Combines: 101,
151, 181, 403, 503, 615, 715,
915, 1482. Windrowers: 402.
571441R91
Idler sprocket. 15 teeth, 5/8"
bore. For rock trap beater drive
idler. Combines: 1420, 1440,
1460, 1480, 1620 (prior to s/n
JJC0032629), 1640, 1660, 1680
(prior to s/n JJC004-5688). For
feeder reverser idler without rock
trap. Combines: 1420, 1440,
1460, 1480, 1620 (prior to s/n
JJC0032629), 1640, 1644, 1660,
1666, 1680 (prior to s/n
JJC0045688), 1688. Replaces
629972R91.
TP-AN15521
Idler sprocket, 17 teeth, 5/8"
bore. For auger drive idler. CornHeads: 900. For straw rack, grain
tank distributor auger and tailings
elevator drive idler. Combines:
914, 915. For grain elevator and
tailings elevator drive idler.
Combines: 1440, 1460, 1480,
1640, 1644, 1660, 1666, 1680,
1688. Replaces 631905R91.
833491M1
Idler pulley, 7-5/16" outside
diameter, 5/8" bore, 7/8" inner rim
width at top. For elevator drive
idler. Combines: 1420, 1440,
1460, 1480, 1620, 1640, 1644,
1660, 1666, 1680, 1688.
Replaces 673214R1.
TP-AE27688
Gathering Chain AssembliesREPLACES
Corn head gathering chain assembly. CornHeads: 800 & 900 series heads: 824, 833, 834,
843, 844, 853, 854, 863, 864, 873, 874, 883,
884, 943, 944, 954, 963, 964, 983, 984. CA555
chain, 48 links, 8 lugs.
176279C91
Eccentric Bearings for Grain
Headers
REPLACES
537290R91 Bearing. Grain Headers: 1010,
1020. Eccentric bearing on 6 bat
reel with front mounted plastic
tines. Uses 204PP-imp.
Pitman StrapsREPLACES
Front pitman strap. For Cub 22 direct cut: L-22,
C-21, C-21M, C-24; 2C-F21 and 24, No. 24;
HM-24, No. 23 side-mounted; 34F21, 34F24,
U-F28, 24, 28, 5', 6' and 7' cut width; A1-23
HIWAY, A21, A22, A24; No.31, No.32; 1A-22,
No.22-4-1/2' and 5' cut width; 200, 230.
MA1577
Rear pitman strap. For Cub 22 direct cut: L-22,
C-21, C-21M, C-24; 2C-F21 and 24, No. 24;
HM-24, No. 23 side-mounted; 34F21, 34F24,
U-F28, 24, 28, 5', 6' and 7' cut width; A1-23
HIWAY, A21, A22, A24; No.31, No.32; 1A-22,
No.22-4-1/2' and 5' cut width; 200, 230.
M1578
IH-7-213www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
7FORAGE ANDHARVESTING
Replacement parts to fit
I.H.C.
Mower Pitman Woods
High Quality Hickory
REPLACES
Pitman wood. 6-1/4" slot one end, 5/8" hole,
1-1/2" deep other end. Mowers: 10, 16, 21, 24,
28, 32. Length 35-11/16".
M22184
Pitman wood. Slot + 4 holes 1 end, 4 holes other
end. Mowers: 12, 25, 27, 31. Length 31-3/4".
M32119
Rubber Mounted Rake ToothREPLACES
Single tine, rubber mounted rake tooth. 10" long
from hole center to tip. Rake: 9, 14, 16, 35.
473378R91
Tooth, heavy-duty rubber mounted. Fits most
parallel bar rakes with round bar: Allis Chalmers,
John Deere, IHC, New Holland, New Idea, and
others.
IRT101-K
Spring Teeth & Fingers for
Rakes & Balers
REPLACES
Double rake tooth for models: 5, 1952 & later.
7-3/4" tip to front of coil, 3-5/8" between tines,
1-13/16" O.D. coil.
455165R1
Single rake tooth. For models: 11, 15, 1956 and
later. Replaces 457374R1.
462978R1
Rake tooth, import. Rakes: 3, 4, 5, 8, 9, 11, 14,
15, 16, 30, 35, 86, 96, 97.
IH1A-IMP
Mower TeethREPLACES
540565R1 Mower conditioner tooth, double.
Mower Conditioners: 990, 1190,
1490, 1590.
Knifehead Repair KitREPLACES
Knifehead pin replacement kit. Contains pin,
bushing, nylon washer and plug. For balanced
models. Mowers: 100, 105, 110, 115, 120, 1000,
1010, 1100, 1200, 1300, 3110, 3410.
725-001K
Sickle Head PinREPLACES
Knifehead pin. Mowers: 100, 105, 110, 115, 120,
1000, 1010, 1100, 1110, 1200, 1300, 3110,
3410.
458973R4
Mower Blades for Rotary Disc
Drum Mowers
REPLACES
Blade, for disc mowers. 96mm long, 40mm
wide, 3.5mm thick, 19mm hole diameter. DiscMowers: 3104 (8 used), 3106 (12 used).
3164894R4
Blade, LH, counterclockwise. 120mm long,
48mm wide, 4mm thick, 18.5mm hole diameter.
Disc Mowers: 3204, 3205, 3206, 3309.
58699
Blade, RH, clockwise. 120mm long, 48mm wide,
4mm thick, hole diameter 18.5 mm. DiscMowers: 3204, 3205, 3206, 3309.
58700
IH-7-214www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
7FORAGE ANDHARVESTING
Replacement parts to fit
I.H.C.
Knife HeadREPLACES
Knifehead. Mower Conditioners: 1190.
Windrowers: 210 (s/n 3700 & up), 230, 4000,
5000, 5500 (prior to s/n 601).
824594C91
Twin Point SectionsREPLACES
Straight holes, 2-1/16" center 3" x 3-1/4" topserratedREPLACES
COMBINE CUTTER HEAD
APPLICATION
GAUGEFINISHReplaces
IHC Series 820, NewHolland, Hesston
X-HVYChrome622-021K
IHC Series 820, NewHolland, Hesston
X-HVYPlain622-091K
Countersunk holes, 2-1/16" centers 3" x 3-1/4" topserratedREPLACES
COMBINE CUTTER HEAD
APPLICATION
GAUGEFINISHReplaces
John Deere Series 200, IHCSeries 820, New Holland 972
X-HVYChrome622-031K
3 elongated holes, 1-1/32" centers 3" x 3-1/4" topserratedREPLACES
COMBINE CUTTER
HEAD APPLICATION
GAUGEFINISHReplaces
IHC 1010 & 1020X-HVYChrome622-251K
Sickle Sections
For mowers, mower conditioners, & windrowers
REPLACES
TYPEGAUGEFINISHReplaces
3" x 3-1/4" SmoothX-Hvy.Plain826724C1
3" X 3-1/4" SmoothReg.Plain826725C1
3" x 3-1/4"Underserrated
Reg.Chrome457606R2
3" x 3-1/4"Underserrated
X-Hvy.Chrome457607R2
3" x 3-1/4"Underserrated
X-Hvy.Plain826722C1
3" x 3-1/4"Underserrated
Reg.Plain826723C1
3" x 3-1/4"Topserrated
X-Hvy.Chrome596321R2
3" x 3-1/2"Topserrated
10 serrationsper inch
"Big Tooth"596321R3-BT
Combine Sickle SectionsREPLACES
Big Tooth replacement for 826720C2. Ideal for
coarser, dryer stem crops. 10 serrations per
inch. 3" x 3-1/4" top serrated.
826720C2-BT
Sickle section, 3" x 3-1/4" top serrated. X-Hvy
gauge, Plain finish. Uses rivet RIV101. Replaces
section M333 1/2S. Also used on 820 grain
header.
826720C1
"Sabretooth" section. 7 serrations per inch. XH
TS BL, 3" x 3-1/4", 2-1/16" hole centers.
826720C3ST
Sickle section for combines, 3" x 2-1/2" top
serrated. X-Hvy gauge, chrome finish. Uses
rivet CR8-5. Used on 810 grain header with Hart
Carter floating cutter bar.
179736C2
"Sabretooth" section, 7 serrations per inch. XH
TS BL, 3" x 3-1/4", 2-1/16" hole centers.
596321R3ST
IH-7-215www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
7FORAGE ANDHARVESTING
Replacement parts to fit
I.H.C.
Sickle AssembliesREPLACES
NUMBER
OF
SECTIONS
INCLUDES HEAD
NUMBER
LENGTH
(FT)
TYPE OF
SECTION
RIVETED/BOLTED
SECTION
SICKLE
ASSEMBLIES
Application
28MA9997'XH, USRivetedMA22837Mower: 200, 3002856692C917'XH, USRiveted462380R92Mower: Balanced-head series 100,
110, 115, 120, 1000, 1100, 1110, 1200,1300, 3110, 3410
3656692C919'XH, USRiveted463159R92Mower: Balanced-head series 100,110, 115, 120, 1000, 1100, 1110, 1200,1300, 3110, 3410
3556692C919'XH, TSRiveted1281291C1Mower: Balanced-head series 100,110, 115, 120, 1000, 1100, 1110, 1200,1300, 3110, 3410
36824594C919'XH, USBolted101988C95BMower Conditioner: 119035540607R119'XH, USRiveted540605R91Mower Conditioner: 99035540607R119'XH, USBolted540605R91BMower Conditioner: 990
GuardsREPLACES
MC2041Z Malleable Guard. Single Prong.
Center guard w/serrated ledger
plate. Mowers: CUB22, 1A22, 22,
L22, Intl 23, 100, 105, 110, 115,
120, 200, 222, 230, 1000, 1100,
1200, 1300, 1110, 3110, 3410.
Forged steel guards; two-prong.
Reference BU210. Windrowers:
75, 210 (with platform s/n 3700
& up), 230. Mowers: 100, 110,
120 (1960), 155 (1966 & up), 200,
230, 100, 1100, 1110, 1200,
1300, 3110. Mower Conditioner:816, 990. Combine: LH on 820
grain header. Forage Harvester:650, 655. Also left-hand. Single
auger and draper headers, #2 and
3 on dual auger header used on
275, 375, 4000, 5000, 5500.
483500R3
Forged steel guards; two-prong.
Reference BU270. Mowers: 100
(1958-65), 110 (1960-65), 115
(1965), 120 (1961-65). MowerConditioners: 1290.
Windrowers: 75, 175, 201, 210,
225, 230. Also single and dual
auger headers and draper
headers. Used on 275, 375, 4000,
5000, 5500.
613838R2
Forged steel guards. Two-prong
strut guard for stoney ground
conditions. Reference BT260.
Mower Conditioners: 1290.
Windrowers: 210, 225, 230, 275,
375.
823025C1
Clip for low arch, for guard
823025C1.
BT261
Clip for two prong strut guard.
High arch, reference BT262, for
guard 823025C1.
BT262
Two-prong guard, reference
BU299. Combine: 1020 Series.
1307299C1
Stub guard. Mowers : 100, 1000,
110, 1100, 1110, 115, 120, 1200,
1300, 200, 230. MowerConditioners: 1190, 1490, 1590,
816, 990; also fits windrowers
w/stub guards.
472717R1
IH-7-216www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
7FORAGE ANDHARVESTING
Replacement parts to fit
I.H.C.
Knife ClipsREPLACES
MB812 Malleable knife clip, high arch. For
riveted sickles. Mowers: 22, 31,
32, HM24, 100, 105, 110, 115,
120, 200, 230, 1000, 1100, 1110,
1200, 1300, 3110. Can replace
611759R1.
Knife clip, low, universal, for
riveted or bolted sickles. Can
replace IHC part numbers
613842R2, 1307280C1.
515-116K
High knife clip, for most sickles
except Hart-Carter, Love,
Versatile.
Can replace the following OEM
numbers:
IHC 595648R1, 611759R1;
Hesston 142984.
515-126K
Bale CounterREPLACES
Bale counter, left hand pull. For all popular
models of balers.
495754R92
Bearing Kits for CombinesREPLACES
IH52 Auger bearing kit. For wooden
block upgrade on combine grain
pan auger, instructions included.
Special heavy duty greasless
bearing and seals with moisture
protection for long life. Precision
machined steel shaft fits into
auger end making auger run true
and easy. Maintaining auger
position creates less wear on
related parts and less downtime
with easy installation instructions
included.
IH-7-217www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
7FORAGE ANDHARVESTING
Replacement parts to fit
I.H.C.
Split Sprockets for CombineREPLACES
Split sprocket, 9 teeth, 1-1/2" hex bore. For
feeder house chain, conveyer shaft. Can replace
original one piece sprocket 1970248C1.
Combines: 1440, 1460, 1480, 1640, 1660, 1666,
1680, 1688, 2144, 2166, 2188.
H5509NHIH
Split sprocket, 7 teeth, round
bore 1", chain type is CA550,
OEM IHC. Location used: clean
grain & tailings elevator. Upper &
lower sprockets. Check shaft
diameter before ordering. Can
replace original one piece
sprocket 168683C1. Combines:
815 thru 2188.
H5507A5
Split sprocket, 7 teeth, round
bore 1-1/8", chain type is CA550,
OEM IHC. Location used: clean
grain & tailings elevator, upper &
lower sprockets. Check shaft
diameter before ordering. Can
replace original one piece
sprocket 1302200C1. Combines:
1440, 1460, 1480, 1482, 1680,
1682, 1688.
H5507Q6
Split sprocket, 7 teeth, 1-1/4"
round bore. For clean grain
elevator chain, lower sprocket.
Check shaft diameter and tooth
count before ordering. Can
replace original one piece
sprocket 1319176C1. Combines:
1440, 1460, 1480, 1482.
H5507B6
Roller Kits for Feeder House
Chain
REPLACES
Roller kit with 37" mounting shaft. Includes 2,
4-1/2" rollers with double bearing, nuts and
washers. Replaces IH35K37.
IH45K37
Roller kit with 47" mounting shaft. Includes 2,
4-1/2" rollers with double bearings, nuts and
washers. Replaces IH35K37.
IH45K47
Roller kit with 47" mounting shaft. Includes 3
4-1/2" rollers with double bearings, nuts &
washers. Combines: 80 series axial-flow with
3-strand feeder chain. Replaces IH35K473.
IH45K473
Roller Kits- For Feeder House Chain. For 60
Series, 80 Series and Axial-Flow Combines.
Individual roller assembly with mounting bolt,
nut & washers. For optional mounting of rollers
using bolt-on method in place of shaft mounting,
2 required. Roller is also used to service/repair
the IH35K37 & IH35K47 kits.
IH35
Flex TinesREPLACES
920-366K Flex Tines. Mounting Hardware
Included. Flex tines for combine
reels with tear drop style bats.
For Headers 1010 or 1020 where
tine is mounted on backside of
reel. Packed 50 pieces per box.
Overall length 11.78".
Flex tine, for combine reels with
wood bats. Packed 100 pieces
per box. Mounting hardware
included. Overall length 10.78".
920-246K
IH-7-218www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
7FORAGE ANDHARVESTING
Replacement parts to fit
I.H.C.
Hub For Row Marker DiscsREPLACES
Hub For Row Marker Discs. Hub assembly, 5/8"
diameter mounting stud. Hub has two bolt hole
circles for mounting to disc on a wide range of
planters. 6 hole, 2-1/2" circle and 6 hole 3" circle.
Bolt holes are drilled for 1/4" bolts. Hub includes
6 = 1/4" x 1" mounting bolts and self-locking
nuts.
HC12A
Cultivator Gauge Wheel &
Related Items
REPLACES
TWAHB9CI Gauge wheel, completely
assembled with tire & bearing.
Fits cultivators with sealed ball
bearing type gauge wheel.
Gauge wheel tire, 4" x 12"
smooth crown, zero pressure.
Same as GWT 14X12CS.
516492R1
Gauge wheel half only, for
cultivators with special ball
bearing-type gauge wheel. 2
required.
526768R1
Bearing, gauge wheel. Bearing
only, replaces ST667.
526769R91
Gauge Wheel Half. Wheel half
only, for cultivators with sleeve
bushing type gauge wheel. 2
required.
TP-C1094N
Cultivator Clamps, Wedge Bolt
& Nut
REPLACES
Cultivator Clamp, closed. For 1-3/8" square tool
bar and 1-1/4" diameter standard. Common on
units used with Cub tractors.
511985R2
Wedge bolt. Replaces 511990R1.512384R1
Nut, used with wedge bolt 512384R1.580004
Wheel HubsREPLACES
Wheel hub. Plows: 735, 730, 700, 710, 510.
Harrows: 480, 490, 760, 770, 475, 485, 501,
596, 496.
465493R2
SpindleREPLACES
Spindle. Harrows: 470, 500, 480, 610, 490, 760,
770 (w/14" wheels}, 475, 485, 501, 596, 496.
1-3/4" dia, 10-13/16" long, 2-3/8" holes.
478375R1
Seal For Wheel BearingsREPLACES
667599R91 Lip type seal for wheel bearings,
outside diameter 1.684", bore
2.650", width .290". Mold-BoardPlow: 700 hi-clearance. PackerMulcher: 315. Harrows: 470,
475, 480, 485, 490, 496, 500,
501, 596, 610, 760, 770.
IH-8-219www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
8IMPLEMENTS AND
BEARINGS
Replacement parts to fit
I.H.C.
Implement Wheel Bearing KitsREPLACES
63881C91 Wheel Bearing Kit For Harrows.
Disc Harrows: 470, 475, 480,
485, 490 (center frame), 500,
501, 760, 770 {10 & 12 ft; w/14"
wheels}. Mulchers: 315, 415.
Replaces TISCO kit HWK119.
Components of 63881C91:
Dust cap663908R1
Wear sleeve667564R2
Oil seal667599R91
Inner bearing (M12649)371882R91
Inner cup (M12610)371883R1
Outer bearing (LM48548)618023R91
Outer cup (LM48510)618024R1
Bearing kit, transport wheel. For
bed conditioner. Harrow: 468.
DA-WBK-1
Components of DA-WBK-1:
Bearing cone (LM67048)
Bearing cup (LM67010)
Bearing cup (LM29710)
Bearing cone (LM29749)
Oil seal (HUB-0705)
REPLACES Wheel Hub Ball Bearings
Ball bearing, for wheel hub. Planters: 56, 58,
66, 400 & 500 Cyclo, 600. Mfr. # 204KRNP2.
465003R91
Ball Bearing, for wheel hub. For Fertilizer
Spreaders, Grain Drills and Planters. Planters:
54, 56, 58, 66, 249, 250, 400, 449, 450, 466,
600, 649, 650, 658. Grain Drills: 510, 620, 5100,
6200, 7100, 7200. Also used on many fertilizer
spreaders. Mfr. #203NPP.
465004R91
Implement and Disc BearingsREPLACES
ST745 Bearing, Cadet rotary mower.
Shaft type double roller bearing
with 3/4" threads on each end of
shaft. Regreasable, has zerk
fitting on one end of shaft. Used
as blade bearing on cadet rotary
mowers.
Bearing w/seal & cup assembly.
Tapered roller bearing & seal
LM67048-LM67000LA, tapered
cup LM67010. Used in many
pulleys on combines and for
wheel bearings on planters and
mowers.
602957R91
Ball bearing, used in cylinder drive
chain tightener sprocket.
Combines: 105, 203, 205. Used
in jackshaft drive chain tightener
sprocket. Combines: 815 (prior
to s/n 3987), 914 (prior to s/n
897), 915 (prior to s/n 2670). This
bearing is also used on cotton
pickers and planters. Replaces
203KRR2.
666624R1
Ball bearing with wider inner ring.
Has many applications including
Pitman bearing for knife drives.
Combines: 105, 150, 205, 315.
Also used in idler pulleys &
sprockets on windrowers.
Replaces 207KRRB3,
584148R91.
TP-JD9301
Ball bearing, lower drum on
cotton pickers. Replaces
669807R91.
205KR3
Tapered roller bearing. CottonPickers: 414, 416, 420, 422.
Inside diameter of 1.3125" or
1-5/16", width of .875" or 7/8".
Replaces 671032R91.
M88048
Ball Bearing, spherical, hex bore,
sealed ball bearing. Does not
require locking collar or set
screws. Forage Harvesters: 550,
555 & 650. Draper GrainHeaders: 810. Straw spreaderon combines: 1420, 1440, 1460,
1480. Replaces 548928R91,
195293C91.
205KRRB2
IH-8-220www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
8IMPLEMENTS AND
BEARINGS
Replacement parts to fit
I.H.C.
Spherical ball bearing, triple lip
seals, non-relubricatable. 2.1880"
inside diameter round bore,
outside diameter 3.9370", width
2.1870". Disc Harrows: 500
(1961 to 1971). {DS211TT4}
ST627A
Implement and Disc Bearings.
Spherical ball bearing, triple lip
seals, 2.1880" Inside diameter
round bore, relubricatable. Heavy
duty self-aligning bearing built to
resist shock. Comes mounted in
riveted flangers with four bolt
holes, includes grease fitting.
Disc Harrows: 500 (1971 & up).
(FD211RB)
ST740B
Heavy duty premium quality
spherical ball bearing, triple lip
seals. 1.7700" I.D., round bore,
re-lubricatable, 5" x 5" O.D., 5
diagonal hole center, .531" I.D.
hole. Self-aligning bearing built to
resist shock, comes mounted in
riveted flanges with four bolt
holes, includes grease fitting.
Disc Harrows: 37 (1962 & up),
46, 48, 60, 120 (1961 & up), 122,
130, 132, 150, 330, 350, 370,
470, 475, 480, 490, 610, 760.
Replaces ST427, ST490, ST627.
(FD209RA).
ST491A-TIM
Optional high quality import
bearing, triple lip seals. Import.
1.7700" I.D., round bore,
re-lubricatable, 5" x 5" O.D., 5
diagonal hole center, .531" I.D.
hole. Self-aligning bearing built to
resist shock, comes mounted in
riveted flanges with four bolt
holes, includes grease fitting.
Disc Harrows: 37 (1962 & up),
46, 48, 60, 120 (1967 & up), 122,
130, 132, 150, 330, 350, 370,
470, 475, 480, 490, 610, 760.
Replaces ST427, ST490, ST627.
(FD209RA).
ST491A-IMP
Ball bearing, 1.378" I.D., 2.834"
O.D., .669" wide. Has many
applications including water pump
bearing. Tractors: M, MD, Super
M&MD, W6, WD6, 06, ODS6,
Super W6, WD6, W9, WD9,
Super WD9, 400, W400, 450,
W450. Front axle drive output
shaft. Tractors: 5088, 5288,
5488. Used on 800 series corn
head stock row drive gear.
Replaces 6207 or 207K.
ST205A
Ball bearing, 1.181" I.D., 2.440"
O.D., .629" wide. PTO Shaft and
other uses. Replaces 6206 or
206K.
ST213
Bearing, tapered cone, many
applications including
independent PTO driven shaft.
Tractors: 3588, 3788, 6588,
6788. Mfr. #LM501349.
663557R91
Bearing, tapered cup, many
applications including
independent PTO driven shaft.
Tractors: 3588, 3788, 6588,
6788. Mfr. #LM501310.
663558R1
Ball bearing, inside diameter of
.635" or approx. 5/8", outside
diameter of 1.780". Double disk
opener on 800 planters.
Replaces 145161C91.
1268017C91
Sealed bearing for guage wheel
on 800 planter. Shaft length
1-1/4", shaft diameter .6260" or
approx. 5/8", brg. diameter
1-3/16", overall length 2-15/16".
128558C91
Opening disc bearing, .632" I.D.,
1.7805" O.D., .73" wide. Used on
planter models: 400 & 500 Cyclo
fold & flex frame and 800 series:
also used on dry fertilizer
spreaders for 400 & 500 Cyclo
and liquid fertilizer spreaders for
400 cyclo.
492757R91
IH-8-221www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
8IMPLEMENTS AND
BEARINGS
Replacement parts to fit
I.H.C.
REPLACES Self-Aligning Spherical Ball Bearings With Collars
Wide Inner ring bearings designed for extremely dirty & wet conditions -
available in non-relubricating & re-lube types. Both extended inner ring (RA &
GRA series) and wide inner ring (1100 & G1100 series). Suffixes PPB & RRB
indicate double seals & spherical outside diameters for us in housings with
same spherical inside surfaces to allow unrestricted self-alignment. Bearings
listed will be individually packaged complete with eccentric locking collars and
labeled according to numbers ordered. Part numbers are used only for purposes
of identification.
REF. #O.D.BOREPicture IDReplaces
GRA103RRB22.4409" (62mm)1-3/16"(A)156011C92
G1115KRRB3.5433" (90mm)1-15/16"(A)G1115KRRB-TIM
G1115KRRB3.5433" (90mm)1-15/16"(A)G1115KRRB-IMP
G1104KRRB2.8346" (72mm)1-1/4"(B)173735C91
RA100KRRB2.0472" (52mm)1"(A)214366C91
RA107RRB2.8346" (72mm)1-7/16"(A)256557R92
G1108KRRB3.1496" (80mm)1-1/2"(B)G1108KRRB-TIM
G1108KRRB3.1496" (80mm)1-1/2"(B)G1108KRRB-IMP
RA102RRB2.4409" (62mm)1-1/8"(A)455960R92
RA010KRRB1.5748" (40mm)5/8"(A)RA010RRB-TIM
G1106KRRB2.8346" (72mm)1-3/8"(B)G1106KRRB-TIM
G1106KRRB2.8346" (72mm)1-3/8"(B)G1106KRRB-IMP
GRA104RRB2.8346" (72mm)1-1/4"(A)473097R92
GRA108NPPB3.1496" (80mm)1-1/2"(A)GRA108RRB
RA101NPPB2.4409" (62mm)1-1/16"(A)RA101RRB-TIM
GRA100RRB2.0472" (52mm)1"(A)482303R92
GRA014NPPB2.0472" (52mm)7/8"(A)GRA014RRB
RA014RRB2.0472" (52mm)7/8"(A)564991R92
RA104RRB2.8346" (72mm)1-1/4"(A)565672R92
RA103RRB2.4409" (62mm)1-3/16"(A)RA103RRB-TIM
1107KRRB2.8346" (72mm)1-7/16"(B)1107KRRB
1102KRRB2.4409" (62mm)1-1/8"(B)571334R91
RA106RRB2.8346" (72mm)1-3/8"(A)571588R92
G1107KRRB2.8346" (72mm)1-7/16"(B)G1107KRRB-TIM
G1107KRRB2.8346" (72mm)1-7/16"(B)G1107KRRB-IMP
RA100RR2.0472" (52mm)1"(A)586609R92
1106KRRB2.8346" (72mm)1-3/8"(B)611583R91
RA103RRB22.4409" (62mm)1-1/4"(A)617668R92
1108KRRB3.1496" (80mm)1-1/2"(B)1108KRRB
RA108RRB3.14" (80mm)1-1/2"(A)RA108RRB-TIM
G1102KRRB2.4409" (62mm)1-1/8"(B)G1102KRRB
G1102KRRB2.4409" (62mm)1-1/8"(B)G1102KRRB-IMP
G1014KRRB2.0472" (52mm)7/8"(B)G1014KRRB-TIM
G1014KRRB2.0472" (52mm)7/8"(B)G1014KRRB-IMP
GRA102NPPB2.4409" (62mm)1-1/8"(A)GRA102RRB
IH-8-222www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
8IMPLEMENTS AND
BEARINGS
Replacement parts to fit
I.H.C.
Locking Collars For self-aligning bearings
All TISCO supplied self-aligning bearings including locking collars. To order collars separately, see listing below.
REPLACES
LINK BELT PART NO.BCA PART NO.SHAFT SIZEReplaces
W210-5SC-0105/8" (.625") (15.88mm)S1010K
W212-5SC-0123/4" (.750") (19.05mm)S1012K
W214-5SC-0147/8" (.875") (22.23mm)S1014K
W216-5SC-1001" (1.00") (25.40mm)S1100K-TIM
W217-5SC-1011-1/16" (1.062") (26.99mm)S1101K
W218-5SC-1021-1/8" (1.125") (28.58mm)S1102K
W219-5SC-1031-3/16" (1.187") (30.16mm)S1103K
W2E20-5SC-103-21-1/4" (1.250") (31.75mm)S1103K3
W220-5SC-1041-1/4" (1.250") (31.75mm)S1104K
W222-5SC-1061-3/8" (1.375") (34.93mm)S1106K
W223-5SC-1071-7/16" (1.438") (36.51mm)S1107K
W224-5SC-1081-1/2" (1.500") (38.10mm)S1108KT-TIM
W228-5SC-1121-3/4" (1.750") (44.45mm)S1112K
W231-5SC-1151-15/16" (1.937") (49.21mm)S1115K
REPLACES Flangettes For Self-Aligning
BearingsSold in pairs only
Three bolt, round, non-relube flangette for
1.8504" (47mm) O.D. bearings.
F347
Three bolt flangette, round, non-relube. For
2.0472" (52mm) outside diameter bearings. Can
replace L1921C, P47232H.
F352
Three bolt flangette, round, relube. For 2.0472"
(52mm) O.D. bearings.
F3Z52
Three bolt flangette, triangle, non-relube. For
2.0472" (52mm) outside diameter bearings. Can
replace N72921.
FTR352
Three bolt flangette, round, non-relube with bolt
hole dia. 3.562" for 2.4409" (62 mm) O.D.
bearings.
F362
Three bolt, round, non-relube flangette for
2.8346" (72mm) O.D. bearings.
F372
Three bolt flangettes, round, relube. For 2.8346"
(72mm) outside diameter bearings. Can replace
N52234.
F3Z72
Round, non-relube, for 3.1496" (80mm) O.D.
bearings. Replaces FH050575.
F480
IH-8-223www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
8IMPLEMENTS AND
BEARINGS
Replacement parts to fit
I.H.C.
6200 Series Bearings (Flat Edge)REPLACES
Bearing SidesCBAReference NumberReplaces
Width (C)O.D. (B)Bore Dia. (A)
Open0.5906"2.0472"0.9843"6205ST225B
Open0.748"3.3465"1.7717"6209ST202
6300 Series Bearings (Flat Edge)REPLACES
Bearing SidesCBAReference NumberReplaces
Width (C)O.D. (B)Bore Dia. (A)
2 contact seals0.5906"2.0472"0.7874"6304-2RS524598R91
Open0.9843"3.937"1.7717"6309ST293
IH-8-224www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
8IMPLEMENTS AND
BEARINGS
Replacement parts to fit
I.H.C.
CompressorsREPLACES
118250C1 Air conditioning compressor,
Reman York - LH suction,
Rotolock. Clutch not included.
Tractors: 75, 656, 706, 766, 806,
856, 966, 1466, 1468, 1566,
1568, 1066, 2656, 2706, 2756,
2806, 2856, 4166, 4186, Hydro
100. Combine: 615, 715, 815,
915. Windrower: 4000, 5000,
5500.
Air conditioning compressor,
Reman York - RH suction,
Rotolock. Clutch not included.
Tractors: 886, 986, 1086, 1486,
1586, 3388, 3588, 3788, 4366,
4386, 4568, 4586, 4786, Hydro
186. Combine: 715, 1420, 1440,
1460, 1470, 1480. Windrower:1075.
1924006C1R
Air conditioning compressor,
Reman York - RH suction,
Tube-O. Clutch not included.
Tractors: 3088, 3288, 3488,
3688, 5088, 5288, 5488, 6388,
6588, 6788, 7288, 7488.
Combine: 1620, 1640, 1660,
1670, 1680.
1924008C1
Air conditioning compressor, NewYork LH suction, Rotolock. Clutch
not included. Tractors: 656, 706,
756, 766, 806, 856, 966, 1066,
1466, 1468, 1566, 1568, 2806,
2856, 2656, 2706, 2756, 4166,
4186, Hydro 100. Combine: 615,
715, 815, 915. Windrower: 4000,
5000, 5500.
417888C92LH
Air conditioning compressor, NewYork, RH suction, Rotolock.
Clutch not included. Tractors:
786, 886, 986, 1086, 1486, 1586,
3388, 3588, 3788, 4366, 4386,
4568, 4586, 4786, Hydro 186.
Combine: 715, 1420, 1440,
1460, 1470, 1480. Windrower:1075.
118250C91RH
Air conditioning compressor, NewYork RH suction, Tube-O. Clutch
not included. Tractors: 3088,
3288, 3388, 3488, 3588, 3688,
3788, 5088, 5288, 5488, 6388,
6588, 6788, 7288, 7488.
Combine: 1620, 1640, 1660,
1670, 1680.
1255750C91
Air conditioning compressor, NewSanden SD7H15 - original
replacement, ear mount - 6"
2-groove clutch, horizontal tube
o-ring. Combine: 1620, 1660,
1670, 1680. Windrower: 8820,
8825, 8825HP, 8830, 8840, 8850.
1997755C2
Air conditioning compressor, NewAftermarket Sanden SD7H15 -
6" 2-groove, horizontal tube
o-ring. Combine: 1620, 1640,
1660, 1670, 1680. Windrower:8820, 8825, 8825HP, 8830, 8840,
8850.
1997755C2R
Air conditioning compressor, NewAftermarket compressor. Kit -
York to Sanden conversion kit.
Tractors: 766, 786, 886, 966,
986, 1066, 1086, 1466, 1486,
1566, 1586, 4166, 4186, 4366,
4386, Hydro 100, Hydro 186.
Combine: 615, 715, 815, 915,
1440, 1460, 1470, 1480, 1640,
1660, 1670, 1680.
417888C92S
Air conditioning compressor, Newcompressor. York To Sanden
conversion kit. Replaces tube
o-ring fittings. Use original hoses
- may require bracket
modification. Replaces York/Tech
compressors equipped with
2-groove clutch and left hand
tube o-ring fittings. Tractors:
656, 706, 756, 806, 856, 1468,
1568, 2656, 2706, 2756, 2806,
2856, 4568, 4586, 4786.
Windrower: 4000.
1924006C1S
Air conditioning compressor, NewYork RH suction, Tube-O. Clutch
not included. Tractors: 3088,
3288, 3388, 3488, 3588, 3688,
3788, 5088, 5288, 5488, 6388,
6588, 6788, 7288, 7488.
Combine: 1620, 1640, 1660,
1670, 1680.
1255750C91
IH-9-225www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
9MISCELLANEOUS
Replacement parts to fit
I.H.C.
Air Conditioning Compressors.
(remanufactured) One full year
guarantee from date of
installation. Replacement for
Tecumseh compressor, less
clutch. Has rotalock hose fitting
ports. Left hand suction, no high
pressure relief valve. Replaces
the 10 CID unit.
417888C92
Air conditioning compressor,
Reman York - LH suction,
Rotolock. Clutch not included.
Tractors: 75, 656, 706, 766, 806,
856, 966, 1466, 1468, 1566,
1568, 1066, 2656, 2706, 2756,
2806, 2856, 4166, 4186, Hydro
100. Combine: 615, 715, 815,
915. Windrower: 4000, 5000,
5500.
118250C1
Blower SwitchREPLACES
539052R2 Blower switch - 3-speed blower
switch with knob. Tractors: 766,
966, 1066, 1466, 1468, 1566,
1568, 4166, 4186, 4366, 4386,
4568, 4586, 8825, 8825HP, 8840,
8850, Hydro 100.
Blower switch. 3-speed blower
switch with knob. Tractors: 786,
886, 986, 1086, 1486, 1586,
3088, 3288, 3388, 3488, 3588,
3688, 3788, 4366, 4386, 4568,
4586, 4786, 5088, 5288, 5488,
6388, 6588, 6788, 7288, 7488,
Hydro 186. Combine: 715, 815,
915, 1420, 1440, 1460, 1480,
1620, 1640, 1660, 1670, 1680.
Windrower: 4000, 5000, 5500.
168822C2
Blower switch. 3-speed blower
switch with resistors. Tractors:
656, 706, 756, 806, 856, 2656,
2706, 2756, 2806, 2856.
Combine: 615.
155494C91
Knob, temperature control. Works
on blower switch. Thermostatic
switch, heater control and wiper
switch. 86 and 88 Series Tractors.
D shaft - flat at 12 o'clock point
at 6 o'clock. Tractors: 186 Hydro,
786, 886, 986, 1086, 1486, 1586,
3088, 3288, 3388, 3488, 3588,
3688, 3788, 5088, 5288, 5488,
6388, 6588, 6788, 7288, 7488.
111282C1
Thermostatic SwitchREPLACES
109268C2 Thermostatic switch - rotary
adjustable, 48" capillary tube, with
knob. Tractors: 656, 706, 756,
786, 806, 856, 886, 986, 1086,
1486, 1586, 2656, 2706, 2756,
2806, 2856, 3088, 3288, 3388,
3488, 3588, 3688, 3788, 4386,
4586, 4786, 5088, 5288, 5488,
6388, 6588, 6788, 7288, 7488,
Hydro 186. Combine: 715, 1420,
1440, 1460, 1470, 1480, 1620,
1640, 1660, 1670, 1680.
Windrower: 4000, 5000.
Pressure SwitchesREPLACES
111266C1 High pressure switch - open -
normally open. Opens 305 psi.
Closes 395 psi. Tractors: 786,
886, 986, 1086, 1486, 1586,
3088, 3288, 3388, 3488, 3588,
3688, 3788, 4386, 4568, 4586,
4786, 5088, 5288, 5488, 6388,
6588, 6788, 7288, 7488, Hydro
186. Combine: 715, 1420, 1440,
1460, 1470, 1480, 1620, 1640,
1660, 1680 Windrower: 4000,
5000.
Low pressure switch - normally
closed. Closes 6 psi, opens 15
psi. Tractors: 786, 886, 986,
1086, 1486, 1586, 3088, 3288,
3388, 3488, 3588, 3688, 3788,
4386, 4568, 4586, 4786, 5088,
5288, 5488, 6388, 6588, 6788,
7288, 7488, Hydro 186.
Combine: 715, 1420, 1440,
1460, 1470, 1480, 1620, 1640,
1660, 1670, 1680. Windrower:4000, 5000.
111267C4
Low pressure switch - normally
open. Opens 23 psi, closes 50
psi. Tractors: 766, 966, 1066,
1466, 1468, 1566, 1568, 4166,
4186, Hydro 100.
539061R2
High pressure switch - normally
closed. Closes 225 psi, opens
375 psi. Tractors: 766, 966,
1066, 1466, 1468, 1566, 1568,
4166, 4186, Hydro 100.
539069R2
IH-9-226www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
9MISCELLANEOUS
Replacement parts to fit
I.H.C.
Low pressure switch - open -
drier mount, normally open.
Opens 30 psi, closes 30 psi.
Tractors: 4366, 4568, 4586.
134557C1
Retrofit binary switch kit.
Complete hi and lo side pressure
protection update kit. R134 binary
pressure switch kit. 1/4" R12 port.
Contains switch and adapter.
Tractors: 786, 886, 986, 186
Hydro, 1086, 1486, 1586, 3088,
3288, 3388, 3488, 3588, 3688,
3788, 5088, 5288, 5488, 6388,
6588, 6788, 7288, 7488.
IH5304010
Relay SwitchesREPLACES
437882C1 Relay switch - 86 Series IH A/C
Cut Out Relay, A/C Cab Cutout
Relay. Tractors: 786, 886, 986,
1086, 1486, 1586, 3088, 3288,
3388, 3488, 3588, 3688, 3788,
4366, 4386, 4586, 4786, 5088,
5288, 5488, 6388, 6588, 6788,
7288, 7488, Hydro 100.
Combine: 1420, 1440, 1460,
1470, 1480.
Relay switch cut out - 66 series
IH A/C cut out relay 3 spade.
Tractors: 766, 966, 1066, 1466,
1468, 1566, 1568.
1116972
Receiver DriersREPLACES
134552C1 2-3/4" diameter receiver drier -
2-3/4" x 9-1/2" male flare. Female
switch port, R12 and R134a
compatible. Tractors: 4366,
4386, 4568, 4586, 4786.
Combine: 615, 715, 815, 915.
Windrower: 4000, 5000, 5500.
4" diameter receiver drier - 4" x
6-3/4 male flare, OE/Parker, R12
and R134a compatible. Tractors:
766, 786, 886, 966, 986, 1066,
1086, 1466, 1468, 1486, 1566,
1568, 1586, 4166, 4186, Hydro
100, Hydro 186. Combine: 1440,
1460, 1470, 1480.
111218C1
4" diameter receiver drier - 4" x
6-3/4" male and female o-ring,
OE/Parker, R12 and R134a
compatible. Tractors: 786, 886,
986, 1086, 1486, 1586, 3388,
3588, 3788, Hydro 186.
Combine: 1420, 1440, 1460,
1470, 1480. Windrower: 4000,
5000, 5500.
118304C2
4" diameter receiver drier - 4" x
7-3/4" male and female o-ring,
OE/Parker, R12 and R134a
compatible. Tractors: 786, 886,
986, 1086, 1486, 1586, 3088,
3288, 3388, 3488, 3588, 3688,
3788, 5088, 5288, 5488, 6388,
6588, 6788, 7288, 7488, Hydro
186. Combine: 1620, 1640,
1660, 1670, 1680.
143469C2
Expansion ValvesREPLACES
70179C1 Expansion valve, bulb type - flare
- internally equalized with 12"
capillary tube, R12 and R134a
compatible. Tractors: 656, 706,
756, 806, 856, 2656, 2706, 2756,
2806, 2856, 4366, 4386, 4568,
4586, 4786. Combine: 615, 715,
815, 915. Windrower: 4000,
5000, 5500.
Expansion valve, bulb type - flare
- externally equalized with 12"
tube length, R12 and R134a
compatible. Tractors: 766, 966,
1066, 1466, 1468, 1566, 1568,
Hydro 100.
539064R1
Expansion valve, bulb type - flare
- externally equalized with 19"
capillary tube, R12 and R134a
compatible. Tractors: 786, 886,
986, 1086, 1486, 1586, 4166,
4186, Hydro 186. Combine: 715,
815, 915, 1440, 1460, 1470,
1480. Windrower: 6000, 6500,
8820, 8830, 8840.
66398C1
IH-9-227www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
9MISCELLANEOUS
Replacement parts to fit
I.H.C.
Expansion valve, bulb type -
o-ring - externally equalized with
14" capillary tube, R12 and R134a
compatible. Tractors: 786, 886,
986, 1086, 1486, 1586, 3388,
3588, 3788, Hydro 186.
Combine: 1420, 1440, 1460,
1470, 1480. Windrower: 4000,
5000, 5500, 8820, 8825, 8825HP,
8830, 8840, 8850.
1280333C2
Expansion valve, block valves.
R12 and R134a compatible, 1/4"
mounting holes. Tractors: 786,
886, 986, 1086, 1486, 1586,
3088, 3288, 3388, 3488, 3588,
3688, 3788, 5088, 5288, 5488,
6388, 6588, 6788, 7288, 7488,
Hydro 186. Combine: 1620,
1640, 1660, 1670, 1680.
118321C1
Expansion valve, block valves.
R12 and R134a compatible, 1/4"
mounting holes. Tractors: 5288.
Combine: 1620, 1640, 1660,
1670, 1680.
1990756C2
Blower MotorsREPLACES
66390C1 Blower motor - single shaft - 12
volt single speed 2 wire
reversible with 5/16" shaft.
Tractors: 656, 756, 766, 856,
966, 1066, 1466, 1468, 1566,
1568, 2656, 2756, 2856, 4166,
4186, Hydro 100.
Blower motor - double shaft - 12
volt 2 speed 2 wire motor with
5/16" shafts. Tractors: 856, 2856.
533783R1
Blower motor - double shaft - 12
volt single speed 2 wire motor
with 3/8" shafts. Tractors: 786,
886, 986, 1086, 1486, 1586,
3088, 3288, 3388, 3488, 3588,
3688, 3788, 5088, 5288, 5488,
6388, 6588, 6788, 7288, 7488,
Hydro 186. Combine: 1420,
1440, 1460, 1470, 1480, 1620,
1640, 1660, 1670, 1680.
Windrower: 4000, 5000, 5500,
8820, 8825, 8825HP, 8830, 8840,
8850.
190333A1
Blower motor - double shaft - 12
volt 3 speed 4 wire motor with
3/8" shafts, heavy duty ball
bearing motor. Tractors: 656,
706, 756, 766, 786, 806, 856,
886, 966, 986, 1066, 1086, 1466,
1468, 1486, 1566, 1568, 1586,
2656, 2706, 2756, 2806, 2856,
3388, 3588, 3788, 4166, 4186,
4366, 4386, 4568, 4586, 4786,
Hydro 100, Hydro 186. Combine:
715, 815, 915, 1420, 1440, 1460,
1470, 1480. Windrower: 4000,
5000, 5500, 8830.
175577C1
Blower motor assembly complete
NEW update kit. Heavy-duty
3-speed 12-volt dual-motor
assembly with housing,
CFM-696. Replaces original
assembly on tractors with 4 or 2
wire motor. Tractors: 186 Hydro,
786, 886, 986, 1086, 1486, 1586,
3088, 3288, 3388, 3488, 3588,
3688, 3788, 5088, 5288, 5488,
6388, 6588, 6788, 7288, 7488.
Combines: 1420, 1440, 1460,
1470, 1480, 1620, 1640, 1660,
1670, 1680.
1255878C92
Fan BladesREPLACES
539048R1 Fan blade - 8" condenser fan
blade. Tractors: 766, 966, 1066,
1466, 1468, 1566, 1568, 4186,
Hydro 100.
Blower WheelsREPLACES
539054R1 Blower wheels, Reversible -
3-3/4" diameter wheel, 3/8" shaft.
Tractors: 766, 966, 1066, 1466,
1468, 1566, 1568, Hydro 100.
Blower wheels, CCW - 4-1/4"
diameter wheel, 3/8" shaft.
Tractors: 786, 886, 986, 1086,
1486, 1586, 3088, 3288, 3388,
3488, 3588, 3688, 3788, 5088,
5288, 5488, 6388, 6588, 6788,
Hydro 186. Combine: 1420,
1440, 1460, 1470, 1480, 1620,
1640, 1660, 1670, 1680.
539018R2
IH-9-228www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
9MISCELLANEOUS
Replacement parts to fit
I.H.C.
Blower wheels, CW - 4-1/4"
diameter wheel, 3/8" shaft.
Tractors: 786, 886, 986, 1086,
1486, 1586, 3088, 3288, 3388,
3488, 3588, 3688, 3788, 5088,
5288, 5488, 6388, 6588, 6788,
Hydro 186. Combine: 1420,
1440, 1460, 1470, 1480, 1620,
1640, 1660, 1670, 1680.
539077R2
Hood & Grill PartsREPLACES
48963DXA Lower grill insert with screen.
Five wire squares per inch. USA
made. Tractors: H, HV, Super H,
Super HV. Vintage Iron™
Lower grill insert with screen.
Five wire squares per inch, USA
made. Tractors: M, MV, Super
M, Super MV, MTA, Super MTA,
MD, Super MD, Super MDV.
Vintage Iron™
50204DXA
Hood extensions, pair, for right-
and left-hand sides. Made in the
USA. Tractors: Red Cub (s/n
501-210000), Cub LoBoy (s/n
501-10000). Vintage Iron™
350985R11
Front Grill Fastening SpringREPLACES
391347R1 Front grill screen fastening spring.
Secures screen to grill. 4
required, sold individually.
Tractors: 404, 504, 606, 706,
756, 2404, 2504, 2606, 2706,
2756. Cub Cadets: 72, 73, 104,
105, 106, 107, 124, 125, 126,
127, 147 (to s/n 400000).
Fender Extension KitREPLACES
Fender extension kit. Tractors: H & HV, Super
H & HV, M & MD, Super M & MTA, Super MD
& MTAD, O4, Super W4, W6, WD6, Super W6
& W6TA, W9, WD9, Super WD9, 100, 130, 140,
200, 230, 240, 300, 330, 340, 350, 400 and 450.
Manufactured to restoration standards.
8000072
Fender Panels (Primed)REPLACES
351248R91 Fender assembly, Right or Left
side. Tractors: C, Super C, 200,
230. Fender comes primed.
Fender assembly, Right or Left
side. Tractors: H, Super H, HV,
Super HV, M, Super M, MD,
Super MD, MV, Super MDV,
Super MTA, 300, 330, 340, 350,
400, 450. Fender comes primed.
51500DB
Fender assembly, Deluxe Flat
top, Right side. Tractors: 544,
656, 706, 756, 806, 826, 856,
1026, 1206, 1256, 1456. Fender
comes primed.
399329R2
Fender assembly, Deluxe Flat
top, Left side. Tractors: 544,
656, 706, 756, 806, 826, 856,
1026, 1206, 1256, 1456. Fender
comes primed.
399328R2
Fender assembly, Hi-Crown, Left
side. Tractors: Hydro 84, 584,
585, 595, 684, 685, 695, 784,
884, 885, 895, 995, 3220, 3230,
4210, 4230, 4240. Fender comes
primed.
538641R4
Fender assembly, Hi-Crown,
Right side. Tractors: Hydro 84,
584, 585, 595, 684, 685, 695,
784, 884, 885, 895, 995, 3220,
3230, 4210, 4230, 4240. Fender
comes primed.
136165A1
Fender assembly, Hi-Flat top, Left
side. Tractors: Hydro 84, 584,
585, 684, 685, 784, 884, 885.
Fender comes primed.
3123648R2
IH-9-229www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
9MISCELLANEOUS
Replacement parts to fit
I.H.C.
Fender assembly, Hi-Flat top,
Right side. Tractors: Hydro 84,
584, 585, 684, 685, 784, 884,
885. Fender comes primed.
3123649R5
Fender assembly, Deluxe style,
Left side. Tractors: Hydro 70,
Hydro 86, Hydro 100, 666, 686,
766, 966, 1066, 1466, 1468,
1566, 1568. Fender comes
primed.
533187R1
Fender assembly, Deluxe style,
Right side. Tractors: Hydro 70,
Hydro 86, Hydro 100, 666, 686,
766, 966, 1066, 1466, 1468,
1566, 1568. Fender comes
primed.
533188R1
Grommet, fender hand grip.
Tractors: 544, 565, 666, 686,
706, 756, 766, 806, 826, 856,
966, 1066, 1026, 1206, 1256,
1456, 1466, 1468, 1566, 1568 &
many more applications. Fits
fenders 399329R2, 399328R2,
533187R1, 533188R1.
388940R1
ToolboxesREPLACES
351014R91 Toolbox. Tractors: Farmall Cub
with standard seat. VintageIron™
Toolbox. Fits under flip back seat.
Tractors: A, Super A, B, BN, 100,
130, 140. Vintage Iron™
43527DAX
Toolbox. Light bar mounted,
includes two brackets, lid decal,
and is powder coated. Tractors:
H, Super M, Super MD, MTA,
Super MTA. Vintage Iron™
999760R91
IHC EmblemsREPLACES
369180R1 Hood ornament, chrome finish.
Tractors: 200, 230, 240, 330,
340, 404, 444, 460, 504, 544,
560, 606, 656, 660, 664, 706,
756, 806, 826, 2404, 2444, 2504,
2544, 2606, 2656, 2706, 2756,
2826. Vintage Iron™
Hood emblem, Farmall, bright
metal. Tractors: A, B, BN, C,
Super C.
43658D
Hood emblem, McCormick, bright
metal. Tractors: W4, W6, WD6,
W9, WD9, and others through
1956.
43659D
Cub front emblem. IH block,
chrome-plated w/black
background. Die-cast, 2-9/16" W
x 3" H. Tractors: Cub (1954 -
1963). Vintage Iron™
362387R1
Farmall front emblem. Painted,
chrome w/black background. USA
made. 12-1/8" L x 2-1/8" H.
Tractors: H, HV, M, MV, MD,
MDV. Vintage Iron™
49404D
McCormick front emblem. Not
painted. 12-1/8" L x 2-1/8" H.
Tractors: W4, W6, W9 (1948 &
up), O4, OS4, O6, OS6, ODS6.
Vintage Iron™
355156R1
Hood emblem, IH logo. Red &
black on metal. 2" W x 2-3/16" H.
Tractors: Super A, Super AV, C,
Super C. Vintage Iron™
352580R
Hood emblem. IH logo, red &
black. 2-9/16" W x 2-7/8" H.
Tractors: Super H, Super HV,
Super M, Super MV, Super MTA,
Super WD9, WDR9. VintageIron™
357650R1
Front emblem. IH block, chrome
plated w/red background.
Die-cast, 3" W x 3-1/2" H.
Tractors: 100, 130, 200, 230.
Vintage Iron™
362513R1
Front emblem. IH block emblem,
stainless steel like original,
painted red background. 3" W x
3-1/2" H. Tractors: 300, 330, 350.
Vintage Iron™
365371R1
IH-9-230www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
9MISCELLANEOUS
Replacement parts to fit
I.H.C.
Front IHC block emblem.
Stainless steel, painted red
background. 3-3/4" W x 4-1/4" H.
Tractors: 400, 450, W400,
W450. Vintage Iron™
362320R2
Emblem, IHC/Farmall, used on
front cab. Chromed and painted
die cast metal. Includes mounting
screws. 2-13/16" W x 3-3/8" H.
Tractors: Front Emblem- Cub
(s/n 210001 & up), Cub Lo-Boy
(s/n 10001 & up), 140, 154, 184,
185, 240, 340, 434, 460, 560,
660, 666, 686, 766, Early 786,
886, 966, 986, 1066, 1086, 1466,
1468, 1486, 1566, 1568, 1586.
Lawn & Garden: Cub Cadet (to
s/n 400000). Tractors: Cab
Emblem- 656, 756, 856, 1256.
Vintage Iron™
368523R4
Front Emblem, plastic, IHC logo.
4 mounting holes on back (not
exposed through front). 2-3/16"
W x 3-3/8" H. Tractors: Front
emblem: Cub (s/n 210001 & up),
Cub LoBoy (s/n 10001 & up), 140,
154, 184, 185, 240, 340, 434,
460, 560, 660, 666, 686, 766,
Early 786, 886, 966, 986, 1066,
1086, 1466, 1468, 1486, 1566,
1568, 1586. Lawn & Garden:
Cub Cadet (to s/n 400000).
Tractors: Cab emblem: 656, 756,
856, 1256. Vintage Iron™
2751846R1
Front Emblem, IHC logo. White
plastic with painted red 'I' and
black 'H'. For use on front of
tractor or cab. 2 mounting holes
on back 4" H x 3-5/8" W.
Tractors: Front emblem: 544,
656, 664, 706. Cab emblem:
4100, 4156, 4166, 4186, 4366,
4386. Vintage Iron™
2751848R1
Front IHC emblem (die cast).
Stainless steel mounting screws.
Tractors: Grill mount: 806, 826,
1026, 756, 856, 1206, 1256. Cab
mount: 1456. Vintage Iron™
2751809R1
Front Emblem, IHC logo. White
plastic with red and black paint.
2 exposed mounting holes
through the front. 3-5/8" W x 4"
H. Tractors: 756, 826, 856, 1026,
1206, 1256, 1456. VintageIron™
2751847R1
Front Emblem, IHC logo, plastic
with silver sides 3-1/4" W x 3-1/2"
H. Tractors: 284, 384, 385, 433,
484, 485, 584, 585, 674, 684,
685, 784, 785, 786, 884, 885,
886, 986, 1086, 1486, 1586,
3388, 3588, 3788, Hydro 84,
Hydro 186, 2400A. VintageIron™
275184R1
Side emblem, Farmall Cub.
Stainless steel, 16" long. USA
made. Tractors: Cub (s/n 185001
- 210000). Vintage Iron™
362386R2
Side emblem, IHC Cub. Stainless
steel, 18" long. Tractors: Cub
Lo-Boy (s/n 501 - 10000). VintageIron™
364044R1
Side Emblem, vertical, Cub
Lo-Boy. Stainless steel, 1" W x
5-7/8" H. Tractors: Cub Lo-Boy
(s/n 501 - 10000), Farmall Cub
Lo-Boy (s/n 185001 - 210000).
Vintage Iron™
364045R1
Side emblem, McCormick.
Stainless steel, 1/2" H x 5-7/8" L.
Tractors: Cub (s/n 185001 -
210000), Cub Lo-Boy (to s/n
10000), 100, 130, 200, 230.
Vintage Iron™
362389R1
Side Emblem, Farmall. Stainless
steel, 1.25" H x 16" L. Tractors:
100, 130, 200, 230. (some
applications require re-drilling
holes in hood). Vintage Iron™
389507R9
Side Emblem, McCormick.
Stainless steel, 3/4" H x 9-1/2" L.
Tractors: 300, 350, 400, 450
(Rowcrops). Vintage Iron™
362317R1
Side Emblem, Farmall. Stainless
steel, 2-1/8" H x 26" L. Tractors:
300, 350, 400, 450 (Rowcrops).
Vintage Iron™
362315R2
Side emblem, "Torque Amplifier".
Tractors: Super MTA, 300, 330,
350, 400, W400, 450, W450.
Vintage Iron™
362349R1
IH-9-231www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
9MISCELLANEOUS
Replacement parts to fit
I.H.C.
Engine Serial Number TagsREPLACES
SNTF20 Serial number tag, blank.
Anodized aluminum (user must
stamp own number). 2-15/16" x
6-1/8". USA made. Tractors: F12,
F14, F20, F30, W30, W40.
Vintage Iron™
Serial number tag, blank, early
style (user must stamp serial
number). Includes rivets. 2-¼" x
4". Tractors: Cub, A, B, C, H, M.
Vintage Iron™
SNTES3949
Serial number tag, later style,
blank (user must stamp serial
number). Includes rivets. 2-¼" x
4". Tractors: 200, A, B, C, H, M,
W6, Cub (1950-1957). VintageIron™
SNTLS50
Serial number tag, blank, early
style (user must stamp serial
number). FC pre-printed. Includes
rivets. 2-¼" x 4". Tractors: C.
Vintage Iron™
SNTESSB
Serial number tag, blank, later
style (user must stamp serial
number). FC pre-printed. Includes
rivets. 2-¼" x 4". Tractors: C.
Vintage Iron™
SNTLSSB
PTO Safety ShieldsREPLACES
55398DA P.T.O safety shield for models
with belt pulley. Tractors: A, B,
Super A, AV, C, Super C. Shield
comes painted. Manufactured to
restorations standards.
P.T.O. safety shield for models
without belt pulley. Tractors: A,
B (s/n 19975 & up), Super A, AV,
C, Super C. Shield comes primed.
Manufactured to restoration
standards.
55403DA
P.T.O. safety guard. Tractors: A,
B, Super A & AV, C, Super C, H,
HV, Super H & HV, M & MD,
Super M & MTA, 100, 130, 140,
200, 230, 240, 300**, 330**,
350**, 400**, 450**, 504, 544,
606. Guard comes painted.
Manufactured to restoration
standards. ** Transmission
drive
51484DX
P.T.O. safety shield. Tractors: H
& HV, Super H & HV. Shield
comes painted. Manufactured to
restoration standards.
66387DAXA
P.T.O. safety shield. Tractors: M
& MD, Super M & MTA. Shield
comes primed. Manufactured to
restoration standards.
66424DBX
P.T.O. safety shield for
independent power take off.
Tractors: 300, 330, 340, 350,
400, 450. Shield comes painted.
Manufactured to restoration
standards.
360181R91
Shield assembly, P.T.O., Safety.
Tractors: 330, 340, 460, 504,
560, 606, 660. Shield comes
primed.
364712R21
Shield assembly P.T.O. (with
independent P.T.O.). Tractors:
Hydro 100, Hydro 186, Hydro
3488, 766, 786, 856, 886, 966,
986, 1026, 1066, 1086, 1466,
1468, 1486, 3088, 3288, 3388,
3688, 5088, 5288, 5488, 6388,
6588, 6788. Shield comes
primed.
1264503C1
Cover assembly P.T.O. (with
independent P.T.O.) Tractors:
Hydro 100, Hydro 186, Hydro
3488, 766, 786, 856, 886, 966,
986, 1026, 1066, 1086, 1466,
1468, 1486, 3088, 3288, 3388,
3688, 5088, 5288, 5488, 6388,
6588, 6788. Shield comes
primed.
1264520C1
ScrewREPLACES
Screw, machine, cross-recess, truss head with
washer, coarse thread 5/16"-18NC thread.
Tractors: 300, 330, 340, 350, 400, 450.
362664R91
IH-9-232www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
9MISCELLANEOUS
Replacement parts to fit
I.H.C.
CAB INTERIOR KITSREPLACES
• Restore your TRACTOR/COMBINE to "NEW"condition
• Gives cab a "NEW" appearance
• Safer, quieter, and cleaner cab environment
• Increases resale value
• Easy installation with instructions, custom fit technology
Cab kit without headliner. Black (9 pieces)
Tractors: Hydro 186, 886, 986, 1086, 1486,
1586.
CKIH86
Cab kit without headliner. Black (14 pieces)
Tractors: 5088, 5288, 5488.
CKIH88
Headliner, main. Black basket weave (4 pieces)
Tractors: Hydro 186, Hydro 3488, 886, 986,
1086, 1486, 1586, 3088, 3288, 3388, 3588,
3688, 3788, 5088, 5288, 5488, 6388, 6588,
6788, 7288, 7488.
CHIH86
Headliner, main. Black basket weave (5 pieces).
Tractors: Hydro 186, Hydro 3488, 886, 986,
1086, 1486, 1586, 3088, 3288, 3388, 3588,
3688, 3788, 5088, 5288, 5488, 6388, 6588,
6788, 7288, 7488.
MHIH86
Floor mat. Tractors: Hydro 100, 966, 1066,
1466, 1566, 1568.
FMIH966
Floor mat (with hydraulic seat suspension).
Tractors: Hydro 86, 886, 986, 1086, 1486, 1586.
FMIH86H
Floor mat (with mechanical seat suspension).
Tractors: Hydro 186, 886, 986, 1086, 1486,
1586.
FMIH86M
Cab kit with headliner. Black (5 pieces).
Combines: 1420, 1440, 1460, 1480.
CKIHCOMB
Cab mount insulator. Tractors: 786, 886, 986,
1086, 1486, 1586, 3088, 3288, 3388, 3488,
3588, 3688, 3788, 5088, 5288, 5488, 6388,
6588, 6788. Combines: 1420, 1440, 1460, 1480,
1620, 1640, 1644, 1660, 1670, 1680, 1688. 4
used per cab.
117722C4
Headliner AdhesiveREPLACES
HLA393 Adhesive, Headliner, trim and
laminating. High temperature,
Contact-type adhesive, 1-5 min.
work time, Unusually high initial
or Green strength.
Instrument Panel HousingREPLACES
531038R1 Instrument panel housing. Cast
aluminum. Tractors: 766, 966,
1066, 1466, 1468, 1566, 1568,
Hydro 100. Vintage Iron™
Replacement Decals for
International Harvester
REPLACES
Model A. Contains 12 pieces.D-IHCA
Model A Culti-Vision. Contains 12 pieces.D-IHCACV
Model B. Contains 12 pieces.D-IHCB
IH-9-233www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
9MISCELLANEOUS
Replacement parts to fit
I.H.C.
Model B Culti-Vision. Contains 12 pieces.D-IHCBCV
Model BN. Contains 12 pieces.D-IHCBN
Model BN Culti-Vision. Contains 12 pieces.D-IHCBNCV
Model C. Contains 12 pieces.D-IHCC
Model Cub. Contains 12 pieces.D-IHCCUB
Model H. Contains 12 pieces.D-IHCH
Model M. Contains 12 pieces.D-IHCM
Model MD. Contains 18 pieces.D-IHCMD
Model Super A. Contains 12 pieces.D-IHCSA
Model Super C. Contains 12 pieces.D-IHCSC
Model Super H. Contains 12 pieces.D-IHCSH
Model Super M. Contains 12 pieces.D-IHCSM
IH-9-234www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
9MISCELLANEOUS
Replacement parts to fit
I.H.C.
Model Super MD. Contains 12 pieces.D-IHCSMD
Model Super MTA. Contains 14 pieces.D-IHCSMTA
Model WD 6. Contains 19 pieces.D-MDWD6
Model WD 9. Contains 19 pieces.D-MDWD9
Model W-4. Contains 12 pieces.D-MDW4
Model W-6. Contains 13 pieces.D-MDW6
Model W-9. Contains 13 pieces.D-MDW9
Model 574. Contains 2 pieces.D-I574
Model 1086 (Black stripe). Contains 2 pieces.D-I1086B
Model 1486 (Black stripe). Contains 2 pieces.
(available direct from factory)D-I1486
IH-9-235www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
9MISCELLANEOUS
Replacement parts to fit
I.H.C.
Replacement Paint for
International Harvester
REPLACES
Red
GallonTP110GAL
QuartTP110QT
SprayTP110SP
Farmall Gray
GallonTP112GAL
QuartTP112QT
SprayTP112SP
Case/IH Non-Glare Black
GallonTP120GAL
QuartTP120QT
SprayTP120SP
Off-White
GallonTP900GAL
QuartTP900QT
SprayTP900SP
Red (pre-IHC 2150)
GallonTP905GAL
QuartTP905QT
SprayTP905SP
Also available factory-direct:IHC Red (fast dry):TP110GAL
IH Blue:
TP910GAL
TP910QT
TP910SP
Miscellaneous PaintREPLACES
Satin Black
GallonTP225GAL
QuartTP225QT
SprayTP225SP
Aluminum
GallonTP312GAL
QuartTP312QT
SprayTP312SP
White Gloss
GallonTP462GAL
QuartTP462QT
SprayTP462SP
Black Gloss
GallonTP550GAL
QuartTP550QT
SprayTP550SP
IH-9-236www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
9MISCELLANEOUS
Replacement parts to fit
I.H.C.
PrimerREPLACES
Gray
GallonTP2700GAL
QuartTP2700QT
SprayTP2700SP
White
GallonTP2710GAL
SprayTP2710SP
Yellow
GallonTP2720GAL
QuartTP2720QT
SprayTP2720SP
Red
GallonTP3987GAL
QuartTP3987QT
SprayTP3987SP
Acrylic HardnerREPLACES
Acrylic hardener, lead free. For alkyd gloss
tractor and implement enamel, 8 oz. can.
Improves initial dry time and hardness
development. Use with slow dry alkyd base
tractor and implement gloss enamel. Not
compatible with fast dry enamel or other paints
TP12HP
Acrylic hardener, 16 oz. can, lead free. For alkyd
gloss tractor and implement enamel. Improves
initial dry time and hardness development. Use
with slow dry alkyd base tractor and implement
gloss enamel. Not compatible with fast dry
enamel or other paints.
TP12P
International Harvester
3-Piece Seat Cushion Set
REPLACES
IH6012 Seat cushion kit, black & white.
Contains seat cushion, lower
backrest & upper backrest. Steel
backed. Tractors: Hydro 70,
Hydro 86, Hydro 100, 504
Deluxe, 544 Row Crop, 656 (prior
to s/n 14500), 666, 686, 706, 756,
786, 806 (prior to s/n 14500), 826,
856, 966, 1026, 1066, 1206,
1256, 1456D, 1466, 1468, 1566,
1568, 2504 Deluxe, 2706,
Deluxe, 2756 Deluxe, 4100,
4156, 4166, 4186 (s/n 19259 &
up).
IH-9-237www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
9MISCELLANEOUS
Replacement parts to fit
I.H.C.
International Harvester Seat
Parts
REPLACES
356892R2 Pin hinge, for tilt back seat
bracket. Tractors: C, Super C, H
& HV, Super H & HV, M & MD,
Super M & MTA, Super W6 &
W6TA, 200, 230, 300, 340, 350,
400, 450, 460, 560, 660.
Pin, seat special support, pivot (3"
long). Tractors: C, Super C, M,
MD, Super M & MTA, 200, 230,
240, 300, 330, 340, 350, 400,
450, 460, 560, 600, 660.
Manufactured to restorationstandards.
355753R1
Pin, seat hydraulic support pivot
(6" long). Tractors: H, HV, Super
H & HV, M, MD, Super M &
MTA.
Manufactured to restorationstandards.
352648R1
Bushing, shock absorber
mounting seat pin. Tractors: C,
Super C, H, HV, Super H & HV,
M, MD, Super M & MTA, 200,
230, 300, 350, 400, 450, 460,
560, 600, 650, 660.
Manufactured to restorationstandards.
72696R1
Conical spring, for tractor seat
(3/8" wire, 11-3/4" length, 8-1/2"
dia. at base). Tractors: C, Super
C, H, HV, M, MD, Supers M &
M-TA, 200, 230, 300, 350, 400,
460, 560, 600, 650, 660.
Replaces 352598R2 and
354671R2.
354670R2
Coil seat spring. Tractors: H &
HV (both up to s/n 15697), M,
MD & MV (all up to s/n 9286), I4,
W4, O4, OS4, Super W4, I6, W6,
WD6, O6, OS6, Super W6TA (up
to s/n 9084), W9, WD9, Super
WD9. Dimensions: 2-1/4" O.D.
4-3/4" TALL.
48930DB
Shock absorber, for seats with
Rear mount shock absorber.
(11-1/2" c to c compressed
length), (18" fully extended).
Tractors: H, HV (s/n 15698 to
281555), M, MV, MDV, Super
MD & MDV (s/n 9287 to 165270).
352587R92
Shock absorber, for MID
mounted shock. (8-3/4" c to end
of stud compressed), (11" fully
extended). Tractors: H, HV (s/n
281556 & up), Super H & HV (s/n
801 to 19233), M, MD, MDV,
Super M & M-TA, Super MD &
MDV (s/n 165271 & up).
353204R93
Shock absorber, for Mid mounted
shock. (7-1/4" c to c compressed),
(9-1/8" fully extended). Tractors:
C, Super C, Super H & HV (s/n
19234 & up), M, MD, MDV,
Super MD & MDV, 200, 230, 300,
350, 400, 450, 460, 560.
351750R93
International Harvester
Replacement Seat Cushions &
Backrests
REPLACES
64B Seat cushion, fits deluxe seat on
IH models. Tractors: 460, 560,
660. Black & white.
Seat cushion, 3-position wrap
around seat. Tractors: 504, 656,
706, 806, 1206, 4100. Can
replace 380680R94. Black &
white.
66B
Wrap around armrest, same
application as 66B.
Can replace 387174R92.
67BR
Seat cushion, Weatherproof vinyl
covering, for IH deluxe seat. Color
matched to original. Tractors:
Cub, 100, 130, 140. (19-1/2" x
14-1/2")
363220R91
Back cushion, weatherproof vinyl
covering, same application as
363220R91. (19-1/2" x 5")
363219R91
Seat cushion, weatherproof vinyl
covering, for hydraulic seat.
Tractors: Hydro 100 756, 766,
826, 856, 966, 1026, 1066, 1256,
1456D, 1466, 1468, 1566, 1568,
2756, 2826, 2856, 21026, 21256,
21456D.
400688R2
IH-9-238www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
9MISCELLANEOUS
Replacement parts to fit
I.H.C.
International Harvester Seat
Adapter Plate
REPLACES
TS424SB Adapter Plate for Suspension
Seats
Adapter plate, for mounting
TISCO TS series adjustable base
suspension seats on International
Harvester models. Tractors:
Hydro 84, 454, 464, 484, 574,
674, 584, 684, 784.
Adapter plate, for mounting
TISCO TS series adjustable base
suspension seats on International
Harvester models. Tractors:
Hydro 100, 186, 706, 756, 766,
806, 856, 886, 966, 986, 1026,
1056, 1066, 1086, 1206, 1256,
1456, 1466, 1486. Suggested
seat models: TS950, TS105
TS806SB
IH-9-239www.tiscoparts.com fax: (800)356-5487 tel: (800)338-0145
© 2011 Woods Equipment Company/TISCO All rights reserved.
9MISCELLANEOUS
Replacement parts to fit
I.H.C.