Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
CONTENTSPage
WARNINGS 1
PRECAUTIONS 2
INTRODUCTION 3-5ABOUT DVD 3ABOUT PLAYER 4-5
SYSTEMCONNECTION 6
GETTING STARTED 7-8
FUNCTIONBUTTONS 9-11
MP3/PICTURE DISC PLAYBACK 12
SETUP MENU 13-18SYSTEMSETUP 13-14LANGUAGE SETUP 15AUDIO SETUP 16VIDEO SETUP 17DIGITAL SETUP 18
TROUBLESHOOTING 19-20
SPECIFICATION 21
1
WARNINGSUse a separate power socket, one not sharingwith others electrical appliances.
Do not dismantle, repair or re-assemble themachine yourself.
Remove the power plug when the machine is notin use to save electricity.
Do not use the machine either below 100V orabove 240V.
When the voltage is below 100V, the machinemay not work and its longevity will be affectedadversely. When the voltage is above 240V, themachine may explode or cause a fire.
Maintain and look after the power cord. In orderto ensure your safety, do not pinch, twist, pull,lengthen or subject the cord to pressure orabuse.
Do not wet the machine or use it in a bathroom orother humid environments to avoid an accident ordamage to the machine.
2
PRECAUTIONS
Positioning
Although the machine does not produce much heat, ensure that you leave at least a 5cm spacearound the machine for ventilation.
Do not locate the machine in an unstable place, in a hot or sunny place, or in a humid or dusty place.
Caution
Do not operate the machine outdoors in rainy orhumid conditions to avoid electrical leakage, ashort circuit or unforeseen accidents fromhappening.
Thunder
If the machine does not work in bad or thunderyweather, remove the plug from the power socket,wait a minute and then re-insert the power plug.
Cleaning & Maintenance
Use a soft cloth or a cotton bud dipped in adiluted, neutral cleanser to gently wipe the coverof the machine. Do not use any abrasive cloths,harsh cleansers or volatile chemical solutions
Small Objects/Liquids
If any small objects or liquids drop into themachine or if the machine emits smoke orotherwise behaves abnormally, disconnect themachine immediately and send it to anauthorised service center for repair.
Relocation
Remove the disc prior to relocating the machineto ensure the safety of the disc and the machine.
Re-packaging
Please use the original packaging materials torepackage the machine in order to minimizevibration during transit.
3
INTRODUCTIONABOUTDVD
DVD (Digital Versatile Disc) is a digital video medium inthe MPEG II format, featuring a variety of revolutionaryentertainment capabilities. The MPEG II videocompression technology provides capacity for anexcellent picture of a minimum 500 lines on-screenresolution, up to 8 language soundtracks, up to 9 viewsfrom different camera angles and up to 32 languagesubtitles (provided by the DVD discs which supports thesefeatures).Disc Information
Disc Types DVD CDDecodingMethod Digital/MPEG II Digital
Capacity
Single layer / Single side(4.7 GB = 2 hrs)
Single layer / Double sides(8.5 GB = 4 hrs)
Double layers / Single side(9.4 GB = 4.5 hrs)
Double layers / Double sides(17 GB = 8 hrs)
650 MB = 74 mins
Disc Size 12 cm / 8 cmHorizontalResolution
500 lines up -
Subtitles 32 -Soundtracks 8 1
Symbol
DVDfeatures andsymbolsEach DVD disc contains various features depending onthe production of the disc. Below are some of the symbolsrepresenting the features:
Number of Audio Tracks Screen Format
Number of Subtitles Zoom
Angle Indicator
If a video recorder is connected to theplayer, the video output image will bedistorted during recording.
REMARKSome features contained in this DVD player are related to the DVDdisc’s software. Some features cannotbeperformed if thediscdoes not support the feature, or requires special settings.Check the features printed on the disc’s packaging or follow the onscreen menu instructions of the disc.
SelectingADVD
Disc DVDRegionCodeDVD discs and DVD players are manufacturedin accordance with the worldwide agreed DVDregional code system that states the player willoperate only with corresponding discs of thesame regional code.RegionCode
Region
1 Canada, USA2 Europe (incl. Poland, Romania, The Czech
Republic, Japan, Middle East (incl. SaudiArabia, Egypt, Iran, South Africa)
3 East Asia (incl. Hong Kong, Taiwan, SouthKorea), South East Asia
4 Australia, Caribbean, Central & SouthAmerica, Mexico, New Zealand
5 Africa, Russia, India, North Korea,Pakistan, Turkmenistan
6 China
CaringFor Your DiscVideo discs contain high-density compressed datathat need proper handling· Hold the disc with your fingers. Hold the
disc’s outer edge and/or the center spindlehole. Do not touch the disc surface.
· Do not bend or press the disc. Do NOTexpose the disc to direct sunlight or heatingsources.
· Store discs vertically in a dry cabinet.· Clean the disc surface with a soft, dry cloth.
Wipe the disc surface gently, radiating fromthe center toward the outer edge.
· Do not apply thinners, alcohol chemicalsolvent or sprays when cleaning. Suchcleaning fluids will permanently damage thedisc surface.
4
INTRODUCTIONABOUT PLAYER
01. DVD DOOR02. OPEN / CLOSE03. DISPLAY WINDOW04. PLAY / PAUSE05. POWER06. USB07. MIC
BackPanel
01. SUBWOOFER02. S-R SURROUND RIGHT03. F-R FRONT RIGHT04. AUX RIGHT05. CENTER06. S-L SURROUND LEFT07. F-L FRONT LEFT08. AUX LEFT09. VIDEO
5
INTRODUCTIONRemoteControl
1. POWER2. NUMBER KEY3. SETUP4. SEARCH REVERSE/FAST
BACKWARD5. MENU6. REV/SEARCH-7. SOURCE8. PREV/RADIO-9. V-MODE10. STOP11. CH-LEVEL12. PROG13. OSD14. USB/DISC15. TITLE16. RIP/COPY/MO/ST17. OPEN/CLOSE18. A/B19. ANGLE20. PBC21. SLOW22. GOTO23. ZOOM24. OK25. MUTE26. FWD/SEARCH+27. NEXT/RADIO+28. VOL +/-29. PLAY/PAUSE30. S.EFFECT31. TONE32. STEP33. REPEAT34. SUBTITLE/AUTO35. AUDIO/MEMORY
Notes1. The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at
the infrared sensor during operation. When the sensor is covered or there is a large object betweenthe remote control and the sensor, the sensor cannot receive signals. The sensor may not be able toreceive signals properly when it is exposed to direct sunlight or a strong artificial light (such as afluorescent or strobe light). In this case, change the direction of the light or reposition the unit to avoiddirect lighting.
6
SYSTEM CONNECTION
DONOT connect the AC power socketto the wall outlet before the systemconnection is completed.
AUX inputPlease connect from other audio output device
7
GETTING STARTED
Unpack the unit. Read through this user manual before installingand using.
Load batteries into the remote control unit. Connect the system and make sure theconnections are secure.
Connect the power plug to the AC power outlet
Loading batteries into the remote control Remove the battery compartment cover. Load two AAA (UM-4 or R03) batteries into the
battery compartment. Make sure that the batteries have been
inserted with the correct polarities matching tothe symbols +/- marked in the batterycompartment. Close the battery compartmentcover.
When replacing batteries, replace bothbatteries. Do not mix new and used batteriesoperating together; otherwise, the operationlifetime will be much shorter than normal.
Remove batteries if the unit will not be used fora prolonged period of time.
The remote control transmits a directional infraredbeam. Be sure to aim the remote control directly atthe infrared sensor of the unit during operation.
If the sensor has been covered or there is a largeobject between the remote control and the sensor,the sensor will not respond.
The sensor may not be able to receive the remotesignal when it is exposed to direct sunlight or astrong artificial light (fluorescent or strobe light). Inthis case, change the direction of the light orreposition the unit to avoid direct lighting.
Switch on the PlayerPress the main power switch on the DVD player.Power on the TV set and the amplifier,if connected.Setup the SystemSelect the corresponding setting on the TV set (AV1,AV2, S-Video, DVD, etc).If your connection is through a RF modulator, switchthe channel where the DVD screen appears.If an amplifier has been connected, switch to thecorrect output mode.Load a Disc
Press OPEN/CLOSE button on the remote control(or front panel) to eject the disc tray.Load a disc, label side up, onto the disc tray andpress OPEN/CLOSE button.Automatic PlaybackThe unit will take a few seconds to load the disc’sinitial data. It will then display the disc type logo onthe left upper corner on the screen and then startplaying back automatically.
NOTENormally, when a MP3 disc is loaded, the playerwill take a longer time to load.
If a DVD disc menu appears on the screenPress the PLAY button on the remote (oron the unit) to start playing.
Press the DIRECTION buttons to selectthe desired feature in the menu and thenpress the ENTER button to confirm aselection in the menu.
FM operation
Press SOURCE to select to FM function.
Press this button once briefly to selectprevious channels,press it 3 to 5 seconds to search
100KHz step up counter manually.Press this button briefly to select previous
channels,press it 3 to 5 seconds to search100KHz step up counter manually.
Press VOL+ or VOL- to set the desiredvolume.AUX operation:Press SOURCE to select to AUX function.
8
GETTING STARTED
Problemdisc messagesThe following message will display on the screen when there is a problem with the format of the diskloaded:
“WRONGREGIONALDISC”
Region code of the disc does not match the player’s region code (region 1 – 6)
“WRONGPASSWORD”
The rating level of the disc is higher than the rating level setting of the player.The player will not play the disc.
“WRONGDISC”
The player is equipped with automatic disc quality detection software. When the player detects a problemdisc or a damaged disc, the player may keep playing the disc at a lower quality or stop playing dependingon the damage level of the disc.
Production quality of DVD discs vary, some discs may deviate from the industrial standard. Someincorrectly formatted discs may play back on the player, however, the playback and operationalquality of those discs may be substandard.
PowerManagementFor safety reasons, unplug the DVD player if you intend not to use it for an extended period of time.
9
FUNCTION BUTTONSPowerOn/Standby
Open/CloseDisc TrayPress this button to open or close the disctray. You can also do this on the frontpanel.
ProgramTo play a disc in a desired sequence:
Press PROG to enter the program menu.
In DVD modeWhen the program menu appears, input the title andpress OK. Then input the chapter number and pressOK.
(PLAY) Move the cursor to START andthen press the PLAY or OK button to startprogram play.
Press PROG button to quit the programmenu.
In VCD modeIn PBC mode, press the PROG button and theprogram menu appears. Input the track number andpress OK when the programming is completed.
NOTESome DVD discs do not allow program setting. Single track discscannot be programmed.
Under DVD mode,press this button to switchCVBS
Press SETUP and go to AUDIO SETUPfor adjusting KEY,ECHO,And MICVOLUME
NOTEDVD disc start menu may contain the setup of Screen Format,Multi-angle Viewing and Zoom functionality. The picture qualitywill decrease as the picture size increases
While playing a DVD, press the TITLEbutton to return to the beginning of theDVD disc.
While playing a DVD,press the MENUbutton to return to the DVD disc startmenu
NOTESome DVD discs refuse the MENU/TITLE function
SearchingTo search for a desired Title, Chapter or Track.
In DVD modePress the GOTO button once and thefollowing will appear:
Press the GOTO button twice and thefollowing will appear:
Press the GOTO button three times andthe following will appear:
Press the OK button to execute thesearch
Numeric Key Pad(RandomProgramAccess)1. To directly access a DVD chapter or
a CD track, input the desired chapter or track numberusing the numeric key pad.2. Input data for the DVD disc start menu or theplayer’s setup menu
NOTESome DVD discs do not allow direct access function.
The unit will copy or rip the content orsong from CD to USBIn FM mode, press to select mono or stereosound
10
FUNCTION BUTTONSPress AUDIO (MEMORY) to switch between LMONO/R MONO and Stereo when reading a VCDdiscs.Press AUDIO (MEMORY) to choose the audiolanguage (e.g. Chinese, Portuguese, Spanish,English, etc.) when reading DVD discs.In radio mode pressing this button can store thechannel.
Press SUBTITLE to switch to different subtitles (e.g.Chinese, Portuguese, Spanish, English, etc.) whenreading DVD discs.In radio mode,,Press AUTO button to automaticallysearch for a radio station.
While playing back a DVD disc, press the ANGLEbutton repeatedly to select the desired camera angle.A DVD disc may contain up to 9 selectable cameraangles.
Selectan itemin themenuIn the DVD disc mode menu or in the player’s setupmenu, press the DIRECTION button to highlightfunction icons.
Press the OK button to confirm selection.
Press SOURCE to select between DVD, FM andAUX mode.
PlayPress this button to play the disc.PausePress this button to pause the disc. Press again toresume normal playback.
This button has 2 modes.1. Press the STOP button once and the player
memorizes the interrupted position and theOSD shows PRESTOP. When the PLAYbutton is pressed, the player will resumewhere it was interrupted.
2. Press the STOP button again to completelystop the disc. The OSD shows STOP. Whenthe PLAY button is pressed, the disc will startfrom the beginning.
Previous andNext
During play, press the PREV key to go back tothe start of the chapter. Each time that you press this
key it will skip a chapter until it is at the beginning of the disc. Each
press of NEXT key during play will skip the current chapter andplay the next one.In RADIO modeThe PREV and NEXT keys will switch the RADIO channels.
While playing back a disc, press the VOLUME button – or + toadjust the volume output. Volume level will display on screen, e.g.
FastForward/Backward
Press button to skip backwardthrough the disc. Each time the button ispressed, the fast reverse motion speedchanges.
Press button to fast forwardthrough the disc. Each time the button ispressed, the fast forward motion speedchanges.
In RADIO modeThe two keys can fine tune the CFfrequency.
NOTE
The player is muted in fast forward or fast backward mode.Player will not fast forward/backward during WARNING section ofa DVD disc.
Press CH-LEVEL can switchFL,FR,SL,SR,CT,SWAnd also can adjust the volume throughVOLUME button.
Press button to select mute onor mute off.
PlayDVD/VCD/CD/JPEG
Press S.EFFECT for EQ function inVCD, CD, DVD, MP3 and MP4. The EQin STANDARD, CLASSIC, ROCK, JAZZand POP can be switched using theDIRECTION buttons. Press the OKbutton to confirm the setting.
Press this key to switch DVD mode andUSB mode
Invalid KeyTONE
11
FUNCTION BUTTONSRepeatRepeatedly plays back the desired Title, Chapter or Track.
Press REPEAT button to toggle between differentrepeat modes.
In DVD modeREPEAT A CHAPTER REP: [CHAPTER]REPEAT A TITLE REP: [TITLE]REPEAT OFF REP: [OFF]
In CD/MP3 modeREPEAT A TRACK REPEAT 1REPEAT A DISC REPEAT ALLREPEAT OFF REPEAT OFF
NOTESome DVD discs do not allow the REPEAT function. When playinga VCD disc, REPEAT will only work in PBC off mode only.
Repeat sectionA-BTo repeat playback of a specific section of a disc:
Press the A-B button at the starting point of thedesired section. will display on thescreen.
Press the A-B button again at the end of thedesired section, will display on screen.The selected section from A to B will be playedback repeatedly until the function is cancelled.
To cancel the function, press the A-B button againto return to normal play.
NOTESome DVD discs do not allow A-B function. Repeat A-B does notapply to MP3 discs.
Press this key when playing a DVD disc and thescreen will show the title, chapter and length inplay. Press this key again to toggle between thedisplay of the elapsed time, the playing time andthe remaining time of this section and title.
Continue pressing STEP to realize slowplaying under VCD and DVD disc.
Press the ZOOM button repeatedly and the TV willdisplay:
NOTEThe picture quality decreases as the picture size increases.
Press to return to the START menu when
playing a VCD disc.
Press to play in slow motion. Press once to playat1/2 of the normal playing speed; press twice toplay at 1/3 of the normal playing speed; pressthree times to play at 1/4 of the normal playing speed;press four times to play at 1/5 of the normalplaying speed; press five times to play at 1/6 of thenormal playing speed; press six time to play at 1/7of the normal playing speed; press seven times ofpress the[Play/Pause] button to return to normalplaying speed
12
MP3/ PICTURE DISC PLAYBACKWhen a MP3/KODAK disc is loaded, the following will display on the screen:
Press to select the file when the cursor appears in file window.Press select to play the current file select by the cursor.Press to switch between the directory window and the file window.Note:The player will not function correctly under the following condition:1.The disc is badly scratched,damaged or dirty.2.The disc is not finalized.3.The recording format is not supported by the player.
Picture Disc play back instructions
Insert the disc,there will be a catalogue menu on the TV screen.Press button to move the cursor to the leftcatalogue. Next Press buttons to move the cursor to the title you want and press"OK". Movethe cursor to the right catalogue and press"OK",you can display the picture you selected or press "PLAY" button todisplay the images in order.
When playing, press "ZOOM" button, the picture can be enlarged or dwindled to the rate of2,3,4,1/2,1/3,1/4.Press "ZOOM" button again, it will return to normal view. When Zoomed in or out, use thedirection buttons to change or navigate the enlarged image.
When playing, press the ”RETURN” button to go back to the catalogue menu. Using the direction buttons tomove the cursor to choose the catalogue. Then pressing ”PBC” button can start the six-picture playing function.By using the number or direction buttons and pressing “PLAY” button ,it can continue to play orderly
When in six-picture condition, press the ”PREVIOUS” button or “NEXT” on the remote control, you can see thepicture of the next page up and down.
When in six-picture playing condition ,pressing ”RETURN” button can return to the six-picture condition, press itagain will return to the catalogue menu.
When in photo playing condition, press the “PREVIOUS””NEXT” can choose the previous or the next photo When playing ,press the button “PROGRAM” to switch to the 17 pictures display mode.
Ripping instructions Under the condition of OPEN or POWER OFF connect the USB and then put the CD DISC in and then play When playing the CD, press RIPPING key and enter into the main operation interface, using the direction key
and ENTER key to change the record. In the OPTIONS menu, The user can choose the exact song to record In the START menu, after confirming the information without any mistake, press“Enter” key to enter into the
recording process After finishing the record, exit by pressing”QUIT” and press USB/DISC key to read or play the recorded
contents
Currentdirectory name
File Switch Region:Displaysthe file type of the playingand the switching
The playing file is a JPEGpicture file.
Current MP3/JEPG filename. If a JPEG file isplaying the nameshould have a JPEGextension.
13
SETUP MENUUsing the setup menu, you can select the play modesetting and the various outputs, etc.
In each menu page, the menu items are shown onthe left. Use the button on the remote to go to theoption list or setting on the right. Use the button togo back to the left menu item.
1. Press the SETUP button on the remote and thecurrent setup menu appears on the screen.
2. Select the main menu item desired using ,
then press OK, the selected main menu item is
highlighted and its option list is shown on the
screen.
3. Press to go to the option list.
4. Select the option desired using , then
press the OK button.
5. Use to go back to the left menu item.
6. Press the button SETUP to leave the setup
menu main page.
SYSTEM SETUP
TV SYSTEM
According to the system of the TV to be connected,set the system of the unit to have it match the TV.Press SETUP button, the screen shows:
Press ENTER on the remote, the setup menuscreen shows. Press ENTER to select TVSYSTEM ,SCREEN SAVER,VIDEO,TVTYPE ,PASSWORD,RATING,DEFAULT
1.If the system of the TV is NTSC, select NTSC;2.If it is PAL, select PAL;3.If it is AUTO, select AUTO.
SCREEN SAVER
O·
·
N: Turn the SCREEN SAVER on. The Discwill play automatically.OFF: Turn the SCREEN SAVER off.
14
SETUP MENU
VIDEO
INTERLACE: Video output throughCVBS(Video),S-Video and interlace videofrom Component(Y/Pb/Pr)output
P-SCAN: Video output throughComponent(Y/Pb/Pr)output
TV TYPE
NORMAL/PS–4x3PanScanChoose this setting and the movie will fill theentire TV screen with some parts to the left andthe right cut off.Normal/LB–4x3Letter BoxChoose this setting if you want to see movies intheir original aspect ratio. You will see the entireframe of the movie, but it will occupy a smallerportion of the screen.WIDE–16x9WideScreenChoose this setting if your DVD player isconnected to a wide screen TV.
PASSWORD
ON: When password is unlocked, RATING canbe selected.When password is locked, RATING cannot beselected If you want to change the password,
follow this steps:1.Enter the password 8888 when the unit isturned on, press OK2.Enter the new password, Press OK,3.New password change completed and locked
RATING
Press button to select the rating.
DEFAULTS
If you select RESTORE, each function settingreturns to the initial status set by the factory.
15
SETUP MENU
LANGUAGE SETTINGS
Press button to select LANGUAGESETUP
OSD LANGUAGE
ENGLISHThe on screen display language isEnglish
RUSSIANThe on screen display language isRussian
SELECT LANGUAGE
If a language mentioned is recorded on thedisc, you can select sounds, subtitles or discmenu languages. If not, the language recordedon the disc is shown.
AUDIO SETUP
16
SETUP MENU
MIC SETUP
A·
·
·
UTO: Auto select the voice input.OFF: Disable the MIC.
PROLOGIC
The open state will play stereo audiosource, which evolved into virtual 5.1output.
When in closed state, broadcast sourcefor stereo is active,broadcast source for5.1 the power output is 5.1
ECHO
Use to adjust the echo effect.
MIC VOL
Use UP/DOWN button to adjust the microphonevolume.
DOWNMIX
Use the UP/DOWN button to adjust LT/RT,STEREO, VSS, 5.1CH of the downmix.
SUBWOOFER
ON:Turn on theSUBWOOFER,SUBWOOFER a voiceoutput.
OFF:Turn off theSUBWOOFER,SUBWOOFER on voiceoutput.
17
SETUP MENU
VIDEO SETUP
Press UP/DOWN buttons on the remote to selectVIDEO SETUP.
BRIGHTNESS
Use UP/DOWN button on the remote to setbrightness.
CONTRAST
Use UP/DOWN button on the remote to set contrast.
HUE
Use UP/DOWN button on the remote to set hue.
SATURATION
Use UP/DOWN button on the remote to setsaturation.
SHARPNESS
Use UP/DOWN button on the remote to setsharpness.
FONT COLOR
Use UP/DOWN button on the remote to set thecolour of the font.
FONT BACK COLOR
Use UP/DOWN button on the remote to set thecolour of the font back.
18
SETUP MENU
DIGITAL SETUP
The DVD player must be in the stop mode toaccess the DIGITAL SETUP menu. You have topress the STOP button twice to go into stopmode
Press the UP/DOWN buttons on the remote toselect DIGITAL SETUP from the SETUP menu.Press the ENTER button to enter the submenu.
OP MODE
L·
·
INE OUT: Line out mode, with digitaldialog normalisation, compresses inputsignal linearly.RF REMOD: RF remodulation mode, withheavy decompression and digital dialognormalisation.
DYNAMIC RANGE
When the compression mode is set to LINEOUT, this setting can be used to adjust thelinear compression rate, to obtain the differentcompression results of the signals.
DUAL MONO
This is the output mode of the L and R signalsof the set audio output. If it is set to MIX-MONO,the function only works when the DVD beingplayed is a 5.1- channel DVD.
19
TROUBLESHOOTINGShould your HOME THEATRE develop a problem, please check below for possible quick solutions:
Symptom Check and Action
No power. Check if the power cord has been properly connected to the power outlet. Check if the main power on the DVD player has been switched on.
Remote control doesnot work.
Make sure that the main power button on the DVD player has been switchedon.
Does not play No disc, load a disc. Disc has been loaded upside down. Place the disc with the label side up. Disc’s region code does not match to the player. Disc’s rating level is higher than the player’s rating level setting. Disc is not correct type for the player. Disc is damaged or dirty, clean the disc or try another disc. Moisture may be condensed inside the player. Remove the disc and leave
the unit power on for one or two hours.
No picture Check if the TV set is powered on. Use the TV remote to select A/C signal forDVD rather than broadcast.
Check if the system is correctly and securely connected. Check if the connection cables are damaged. Clean the disc. Please press OPEN, then press PROGRAM and ZOOM button to return to
factory default settings.
Picturenoise/distorted
The disc is dirty or damaged. Clean the disc or try another disc. Check the colour setting on the TV set. Try connecting the player directly to direct to the TV set, without using other
devices, for example a VCR.
Picture not in fullscreen
Select the screen format from the SETUP MENU. Refer to “SETUP MENU” inthis manual.
Select the screen format from the DVD disc menu.
Problem messagedisplay on screen
The following message will display when there is a problem with the loaded disc: “WRONG REGIONAL DISC”: Disc’s region code close does not match to
the player. “WRONG PASSWORD”: The player refuses to play a disc with rating level
higher than the player’s rating level setting. “WRONG DISC”: The player is equipped with automatic disc quality
detection software. When the player detects a problem disc or a damageddisc, the player may keep playing the disc at a lower quality or stop playing,depending on the damage level of the disc.
20
TROUBLESHOOTINGShould your HOME THEATRE develop a problem, please check below for possible quick solutions:Symptom Check and Action
Malfunction Press and hold the standby button (if any) for about 5 seconds to power off. Should the player develop a malfunction, unplug the player for 30 minutes.
After 30 minutes, power on the player and the restore function should resetthe player.
Cannot SKIP orSEARCH
Some discs are programmed so that they do not allow users to SKIP orSEARCH during some sections, especially at the beginning WARNINGsection.
Single chapter discs cannot use the SKIP function.
No sound or soundoutput not complete
Check if the TV and amplifier have been switched on and correctly set. Check if the TV and amplifier system connection are secured. Press AUDIO to select other audio track outputs of disc. Press 5.1 CH/STEREO to select correct audio output mode for the DVD to
match the audio equipment used to play the corresponding disc type. Check if the MUTE function of the TV or amplifier has been activated. There will be no sound output during REVERSE PLAY/PAUSE/STEP/SLOW
and SEARCH.
MP3 disc no soundor noisy
When PC program files or other files are mixed with MP3 files in the samedisc, the player may play the non-MP3 files with noise or no sound.
Check the disc, if all the files on the disc are MP3 files, then skip the file andtry other files.
Remote control doesnot function
Remove all obstacles between the remote control and the player Point the remote control towards the remote sensor on the player Check if the batteries of the remote control have been loaded with correct
polarities. Replace the batteries of the remote control.
USB no sound Check files in USB is correct format . Change to a USB with correct format file.
FM no sound orweak Extend antenna wire in rear of unit. Press play/Pause button to search
channels again.
Microphone nosound
Press “setup” and select to “MIC SETUP” menu, then set “MIC SETUP TOAUTO.
Replace microphone.
21
SPECIFICATIONDisc Formats DVD,VCD,SVCD,CD,CD-R,CD-RW
File Formats MPEG 4, MP3, DivX,WMA,JPEG, AVI
Signal Output Colour System: PA
CD: 20 Hz – 20 kHz (EIAT)
DVD: 20 Hz – 22 kHz (48K) 20 Hz – 44 kHz (96K)
L / NTSC Video Output: 1Vpp (at 75 ohm) Audio Output(Stereo): 2 VRMS
FrequencyResponse
S/N Ratio ≥90dB
THD ≤0.05%
Output Terminals 1 x Video (composite) output 1 x Down mix stereo output (left and right) 5.1 CH
Power Input AC 220-240V, 50/60Hz