CONSTRUCTION PRODUCTS C-5-672G-1 672G · PDF fileJohn Deere Powershift Plus? Direct Drive, Countershaft Powershift Event Based Shifting (EBS) - Load Sensing Electronic Shift Modulation

672G Standard Equipment

VEHICLE COOLING:Swing-Out, Cool-On-Demand,Automatic Reversing HydraulicFan (32 In.)Enclosed Engine Fan and FanDrive Guarding (Conforms to ISO3457)Heavy Duty Aluminum Coolers forTransmission, Axle, Hydraulic,Fuel, Charge Air, Radiator andA/C Condenser.Engine Coolant Surge TankCool-Gard II Extended LifeEngine Coolant -34 Degrees F(-37 Degrees C)TRANSMISSION:John Deere Powershift Plus?Direct Drive, CountershaftPowershiftEvent Based Shifting (EBS) -Load Sensing Electronic ShiftModulationOver speed ProtectionQuick Disconnect Pressure Ports

Matched 8 Forward and 8 ReverseSpeedsIndustry Standard U-Shape ShiftPatternTransmission Neutral Lock withPark Start Safety SwitchRubber Isolation Mounting toReduce Noise and VibrationIndependent Oil Reservoir,Filtration and Cooling Systemwith:31 GPM Transmission Gear Pump

2000 Hour Vertical Spin-OnFilterDUAL-PATH HYDROSTATIC 6WD:Variable Displacement PumpsAxial Piston Drive MotorsOperator Selected AggressivenessControlOperator Controlled InchingCapabilityOperational In Gears 1-7 Forwardand ReversePrecision Mode in 1-3 ForwardAXLE, BRAKES AND TANDEMS:Teammate II? AxlePlanetary Single Reduction FinalDrivesInternal Self-AdjustingMaintenance Free Wet Multi-DiskBrakes Inboard of Tandem PivotContinuous Pressurized FilteredOil Cooled BrakesIndependent Oil Reservoir,Filtration and Cooling Systemwith:6.7 GPM Axle Gear Pump2000 Hour Vertical Spin-OnFilterPrimary and Secondary ServiceBrakes (Conforms to ISO 3450)Automatic Differential Lock withOverrideAutomatic Spring-AppliedHydraulic Released Parking Brake(Conforms to SAE J1026)14.0 R 24 Inch G2/L2 Single StarRadial TiresSlip Resistant Platforms on

TandemsOPERATOR?S STATION:Low ROPS/FOPS Air ConditionedCab (Conforms ROPS ISO 3471 /FOPS ISO 3449 Level II)Rubber Isolation Frame MountedKeyless Start with MultipleSecurity ModesAnti-Skid 3 Step Cab AccessFabric Air Suspension Seat withArmrests and Headrest 3 In., (76mm) Seat Belt w/Retractors(Conforms to SAE J386)Tilt Wheel and ControlConsole with 5 ¼ Lock to LockPowerSteering

Electronic Throttle Control withAuto / Manual Modes15 Amp (24 V to 12 V W/Continuous 10 amps) Converterand (2) Power Ports(1)Interior and (2)ExteriorMounted Rearview Mirrors(Conforms to SAE J985)Air Vents on all Front and sideTinted WindowsFixed Lower Front Tinted WindowRear Window Electric DefrosterLaminated Upper Front TintedWindow w/ Sun Shade BandUpper Front and Rear WindshieldWashers with IntermittentWipersMolded Floor MatCoat HookUniversal RH & LH MountingBracketCooler/Lunch Box Storage withCup HolderOperator?s Manual StorageELECTRICAL:24 Volt SystemAlternator (dependent on engineemission and optional equipment)Bypass Start Safety Cover onStarterAll Light and Wiper Switcheshave Solid State ElectricalPower Distribution SystemBatteries (2), 1400 CCA with 440Minute Reserve CapacityPositive Terminal BatteryCoversGround Level Electrical MasterDisconnect SwitchElectric Fuel Shut off SwitchTransporting Lights w/LED Signaland Marker Lights (4 HalogenTransport lights) TransportingLights (4 Halogen TransportLights). Includes LED turnsignals on front frame, LED rearturn signals mounted on reargrille, front and rear LEDmarker lights, LED brake lightsand LED hazard warning lights.Cab Pre-Wired (10 amp) forBeacon, Radio and AuxiliaryCircuitElectric Forward Warning Horn(Conforms to ISO 9533)Back up Warning Alarm (Conformsto ISO 9533)Sealed Switch Module withFunction IndicatorsMulti-Function / Multi-Language

LCD Color Monitor includes:DIGITAL INSTRUMENTSANALOG Display:

Hydraulic Oil Temperature

Engine Coolant Temperature

Transmission OilTemperature

Rear Steer ArticulationAngle

Fuel LevelDEF Level (FT4 Only)

DIGITAL Display:Engine RPMTransmission Gear IndicatorHour MeterSpeedometerOdometerOutside Ambient Temperature

Integrated Job Timer andStop Watch

INDICATOR LIGHTS for Standardand Selected Options

INDICATOR LIGHTS for AmberCaution and Red Stop

OPERATOR WARNING MESSAGESBUILT-IN DIAGNOSTICS:

Diagnostic Code DetailsSensor ValuesCalibrations

MENU DISPLAY:CodesMachine SettingsDiagnosticsMonitor Settings

HYDRAULIC SYSTEM:PCLS (Pressure Compensating LoadSensing) Hydraulic SystemIndependent Hyd. Reservoir withSight GlassIndependent Main Hydraulicfiltration cooling system with:

56 GPM Main Hydraulic AxialPiston PumpO-Ring Face Seal ConnectorsFloat control included withblade lifts2000 Hour Vertical Spin-OnFilterSTRUCTURE:Main Frame with:

Double Ball-N-Socket PivotConnection

Snow Wing Ready FrameMidmount Scarifier Ready

Grade Control Mount ReadyTapered Roller Bearing in

Bottom Articulation JointTapered Roller Bearing King

Pins on Front AxleLift EyesTiedowns(20) NeverGrease Pin Joints

for Saddle Linkage, Blade Tilt,Rear Steering and Lean

CylindersMOLDBOARD:Patented Pre-Stressed 12 Ft. x24 In. x 7/8 In. (3.66 M x 610mm x 22 mm)Moldboard with:

6 In. x 5/8 In. (152 x 16 mm)Cutting Edge with

(Subject To Change Without Notice) CONSTRUCTION PRODUCTS C-5-672G-1

672G MOTOR GRADER with 6WDEquipment for Base Machine

06 January 2014US

5/8 in. Reversible End BitsQuick Change Circle Wear

Inserts (All Nylon)Quick Change and Adjustable

Heavy Duty Moldboard Side ShiftWear Inserts

Single Input Circle DriveGearbox (non-slip)OVERALL VEHICLE:JDLink Ultimate MachineMonitoring System with 3 yearMessage Service for Cab unitsonly (Available only in United

States and Canada)Left Side Daily ServiceEngine and Service CompartmentLightsHinged Engine Side ShieldsTool Box with TrayArticulation Joint Grease Bank

Articulated frame with Safety

(ISO 10570) locking pinRadiator Surge Tank Access Panel

Bottom/Side Guards with AccessPanels(6) D.O.T. (392&393) PermanentTie Downs for transportSingle Key Locks for EntireVehicleGround Level Fuel TankFilling (FT4 Only)Fluid Sampling Ports for EngineOil, Engine Coolant, Hydraulic,Axle and Transmission OilsVandal Protection Locking for:Service CompartmentsCab DoorsRadiator Surge Tank Access

DoorDEF Tank Door and Cap (FT4 Only)Hydraulic Reservoir Cap*Battery Disconnect Switch

Fuel Tank Door and CapTool Box

Fuel tank,110 gallon (416 L)Environmental Drains with Hosesfor Engine, Transmission,Hydraulic, Axle Oils and EngineCoolant*Remote Filter Bank forHydraulic, Transmission and AxleOils

Vehicle Side Reflectors

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

Select One Code From Each Required Category

BASE MACHINEFOB Davenport, Ia.

"As not all option codes have field kits, please review your order option codes and available kits priorto placing a machine order"

8450T 672G MOTOR GRADER with 6WDKeep in mind that the following John Deere motor graders 770, 772, 870 & 872 offer optimizedperformance for high speed snow plowing applications.

288,588.00

MACHINE CONFIGURATION1010 672G with Standard Hydraulic Controls In Base Price

1020 672GP with Grade Pro ControlsGrade Pro Armrest Controls Include:* Fingertip controls with industry standard control pattern* Automated Cross Slope control* Integrated grade control (Contact TOPCON, Trimble, or Leica for full install requirements)* Return-to-Straight* Armrest steering control AND conventional steering wheel

Requires alternator code 1220 or 1240 and cab code 5060 or 5070.Includes seat code 6140 and grade pro controls code 6650.

27,456.00

ENGINE1140 John Deere PowerTech PSS 9.0L meets EPA FT4 Emissions (237 Net Peak hp)

For use only in areas where EPA Final Tier 4 is required.Requires engine exhaust code 1830 or 1840.

Automatic Exhaust Filter RegenerationSeries Turbo Chargers

46,382.00


672G MOTOR GRADER with 6WDContinued

06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ENGINE Continued...Cooled Exhaust Gas Recirculation4 Valves / CylinderWet Sleeve Cylinder LinersAuto-Idle and Programmable Auto-ShutdownAutomatic Starter Overload ProtectionElectronically Controlled HPCR Fuel Delivery System, B20 Biodiesel CompatibleElectric Fuel Priming System10-Micron Primary Fuel Filter/Water Separator, 500 hour2-Micron Final Fuel Filter, 500 hourInline Fuel StrainerSpin-on Oil Filter, 500 hourOil crankcase filter, LifetimeAuto-Tensioned Serpentine BeltUnder Hood Dual Element Air Cleaner with Restriction IndicatorEngine Intake Rotary Ejector Precleaner

1125 John Deere PowerTech Plus 9.0L meets Tier 3 / EU Stage IIIA emissions (220 Net Peak hp)For use in Canada OnlyRequires engine exhaust code 1820.Includes:Variable-Geometry TurbochargerCooled Exhaust Gas RecirculationElectrical Fuel Priming SystemRubber Isolation Mounting to Reduce Noise and VibrationWet Sleeve Cylinder LinersNo power Derating up to 10,000 ft AltitudeCharge Air Cooler (Air to Air)Automatic Derating for Exceeded System TemperaturesProgrammable Auto-ShutdownStarter ProtectionInline Fuel Strainer10-Micron Primary 500 hour Fuel Filter/Water Separator with Electronic Sensor2-Micron Vertical Spin-On 500 hour Final Fuel FilterSerpentine Belt with Auto Tensioner500 Hour Vertical Spin-on Oil FilterRotary Ejector PrecleanerDual Air Cleaner ElementsSelf Draining Muffler with Curved Stack

15,727.00

1120 John Deere PowerTech Plus 9.0L meets EPA Tier 3 / EU Stage IIIA emissions (220 Net Peakhp)For use in areas where EPA Tier 3/EU Stage IIIA is required.Requires severe duty filter code 1420.Requires engine exhaust code 1820.

Variable-Geometry TurbochargerCooled Exhaust Gas RecirculationCharge Air Cooler (Air to Air)4 Valves / CylinderWet Sleeve Cylinder LinersProgrammable Auto-ShutdownAutomatic Starter Overload ProtectionElectronically Controlled HPCR Fuel Delivery SystemElectric Fuel Priming System10-Micron Primary Fuel Filter/Water Separator, 500 hour2-Micron Final Fuel Filter, 500 hourInline Fuel StrainerSpin-on Oil Filter, 500 hourAuto-Tensioned Serpentine BeltUnder Hood Dual Element Air Cleaner with Restriction IndicatorEngine Intake Rotary Ejector PrecleanerSelf Draining Muffler with Curved Stack

In Base Price

1110 John Deere PowerTech 6.8L meets EU Stage II emissions (185 Net Peak hp)For use in areas where EPA Tier 3/EU Stage IIIA or greater is not required.?

-10,281.00



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ENGINE Continued...Requires severe duty filter code 1420.Requires engine exhaust code 1810.

Fixed-Geometry TurbochargerCharge Air Cooler (Air to Air)4 Valves / CylinderWet Sleeve Cylinder LinersGlow PlugsProgrammable Auto-ShutdownAutomatic Starter Overload ProtectionElectronically Controlled HPCR Fuel Delivery SystemElectric Fuel Priming System10-Micron Primary Fuel Filter/Water Separator, 500 hour2-Micron Final Fuel Filter, 500 hourInline Fuel StrainerSpin-on Oil FilterAuto-Tensioned Serpentine BeltUnder Hood Dual Element Air Cleaner with Restriction IndicatorEngine Intake Rotary Ejector PrecleanerSelf Draining Muffler with Curved Stack

ENGINE EXHAUST1810 Engine Exhaust with Flat Black Muffler for 6.8L

Requires engine code 1110In Configuration

1820 Engine Exhaust with Flat Black Muffler for 9.0LRequires engine code 1120 or 1125.

In Configuration

1830 Engine Exhaust with Flat Black Stack for 9.0L (EPA FT4 only)Requires engine code 1140.

In Base Price

1840 Engine Exhaust with Chrome Stack for 9.0L (EPA FT4 only)Requires engine code 1140.

627.00

GRADE CONTROL2500 Topcon Grade Control Base Kit Installed

Base kit is factory installed and includes additional brackets & wiring harnesses that further enhanceand simplify the addition of a Topcon grade control system. This also enables the Topcon 3D-MC2Grade Control Systems to be ordered.

7,998.00

2575 No Topcon Grade Control Base Kit Installed In Base Price

TOPCON GRADE CONTROL SYSTEMKit includes the following equivalent parts from Topcon 3DMC2 system:

Kit, GX-60 GPSKit, Common 3D Grader GPS JD IGC "GP"Assy, MC-R3 NO-OAFOEM, Antenna Config KitOAF Bundle, MC-R3 GGD 3DMC2Password, MC-R3 Full AutoAssy, IMU MC(2) SensorKit, JD GP MC2/Slope/Mainfall BoltAssy, GX60 To J.D. G-Series Console 20 InFull Assembly and Final Calibration On Site



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

TOPCON GRADE CONTROL SYSTEM Continued...Topcon Grade Control Base Kit Installed (code 2500) contains MC2 sensor bracket and cable.GX-60 bracket is also included.

2710 Topcon 3DMC2 Single Antenna with 915SS Radio In Referral Price

2711 Topcon 3DMC2 Single Antenna with 915SS HSPA Radio In Referral Price

2712 Topcon 3DMC2 Single Antenna with UHF Radio In Referral Price

2713 Topcon 3DMC2 Single Antenna with UHF HSPA Radio In Referral Price

2715 Topcon 3DMC2 Single Antenna with UHF Verizon CDMA Radio In Referral Price

2730 Topcon 3DMC2 Twin Antenna with 915SS Radio In Referral Price

2731 Topcon 3DMC2 Twin Antenna with 915SS HSPA Radio In Referral Price

2732 Topcon 3DMC2 Twin Antenna with UHF Radio In Referral Price

2733 Topcon 3DMC2 Twin Antenna with UHF HSPA Radio In Referral Price

2735 Topcon 3DMC2 Twin Antenna with Verizon CDMA Radio In Referral Price

2775 No Topcon Radio Installation In Base Price

MACHINE CONNECTIVITYMachine connectivity functions require cellular coverage. Usage of JDLink System requirescustomer's acceptance of the terms of the John Deere Telematics System Contract.

Option availability limited by specific geographical regions. Please refer to region specific pricepages for appropriate ordering codes.

1700 JDLink Ultimate Cellular for the Americas, excluding Costa RicaIncludes JDLink hardware: integrated cab wiring harness, antenna, modular telematics gateway(MTG), and JDLink Ultimate activation.

Includes 3 year subscription. Annual subscription renewal required after 3 years for continuedfunctionality. JDLink customer account must be created to access JDLink Ultimate data. Go towww.StellarSupport.com to renew or update JDLink subscriptions.Use of this service, and all rights and obligations of John Deere and the Customer (as identified inthe applicable agreement), are governed by the terms and conditions outlined in the applicableServices and Software agreements available at www.JohnDeere.com/Agreements. If these terms andconditions are not agreeable do not proceed and do not use the service.

In Base Price

1701 JDLink Ultimate Satellite for the Americas, excluding Costa RicaIncludes JDLink hardware: integrated cab wiring harness, antenna, modular telematics gateway(MTG), and JDLink Ultimate activation.

Includes 3 year dual mode subscription. Annual subscription renewal required after 3 years forcontinued functionality. JDLink customer account must be created to access JDLink Ultimate data.Go to www.StellarSupport.com to renew or update JDLink subscriptions.Use of this service, and all rights and obligations of John Deere and the Customer (as identified inthe applicable agreement), are governed by the terms and conditions outlined in the applicableServices and Software agreements available at www.JohnDeere.com/Agreements. If these terms andconditions are not agreeable do not proceed and do not use the service.

1,566.00

1702 JDLink Ultimate Cellular for Costa Rica and Countries outside the AmericasIncludes JDLink hardware: integrated cab wiring harness, antenna, modular telematics gateway(MTG), and JDLink Ultimate activation.

No Charge



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

MACHINE CONNECTIVITY Continued...

Includes 3 year subscription. Annual subscription renewal required after 3 years for continuedfunctionality. JDLink customer account must be created to access JDLink Ultimate data. Go towww.StellarSupport.com to renew or update JDLink subscriptions.Use of this service, and all rights and obligations of John Deere and the Customer (as identified inthe applicable agreement), are governed by the terms and conditions outlined in the applicableServices and Software agreements available at www.JohnDeere.com/Agreements. If these terms andconditions are not agreeable do not proceed and do not use the service.

1703 JDLink Ultimate Satellite for Costa Rica and Countries outside the AmericasIncludes JDLink hardware: integrated cab wiring harness, antenna, modular telematics gateway(MTG), and JDLink Ultimate activation.

Includes 3 year dual mode subscription. Annual subscription renewal required after 3 years forcontinued functionality. JDLink customer account must be created to access JDLink Ultimate data.Go to www.StellarSupport.com to renew or update JDLink subscriptions.Use of this service, and all rights and obligations of John Deere and the Customer (as identified inthe applicable agreement), are governed by the terms and conditions outlined in the applicableServices and Software agreements available at www.JohnDeere.com/Agreements. If these terms andconditions are not agreeable do not proceed and do not use the service.

1,566.00

1704 JDLink Ultimate for RussiaIncludes JDLink hardware: integrated cab wiring harness, antenna, modular telematics gateway(MTG), and JDLink Ultimate activation.

In Base Price

1741 No JDLink Ultimate No Charge

CIRCLE DRIVE GEARBOX2810 Single Input Gearbox without Slip Clutch In Base Price

2820 Single Input Gearbox with Slip ClutchSlip clutch protects circle, circle drive gearbox and draft frame from damage when end of moldboardcomes in contact with stationary objects. Slip clutch is integral to the circle drive gearbox assemblyand allows the circle frame to rotate, avoiding damage to the machine, when the end of themoldboard comes in contact with an immovable object.

2,451.00

2830 Heavy Duty Dual Input Gearbox without Slip ClutchHeavy duty dual input gearbox is an industry exclusive and provides significant improvements incircle drive component durability. The heavy duty dual input circle drive gearbox providescomparable circle torque and circle rotate speed as the single input circle drive gearbox. The heavyduty dual input circle drive gearbox will significantly enhance uptime for the customer and isrecommended for applications that frequently use the circle rotate function while under heavy load.

1,401.00

2840 Heavy Duty Dual Input Gearbox with Slip ClutchHeavy duty dual input gearbox is an industry exclusive and provides significant improvements incircle drive component durability. The heavy duty dual input circle drive gearbox providescomparable circle torque and circle rotate speed as the single input circle drive gearbox. The heavyduty dual input circle drive gearbox will significantly enhance uptime for the customer and isrecommended for applications that frequently use the circle rotate function while under heavy load.

Slip clutch protects circle, circle drive gearbox and draft frame from damage when end of moldboardcomes in contact with stationary objects. Slip clutch is integral to the circle drive gearbox assemblyand allows the circle frame to rotate, avoiding damage to the machine, when the end of themoldboard comes in contact with an immovable object.

3,852.00

LIGHTING PACKAGEFor raised front lights order code 9270 Tall Front Light Bar.All lighting packages include LED turn signals on front frame, LED rear turn signals mounted onrear grille, front and rear LED marker lights, LED brake lights and LED hazard warning lights.



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

LIGHTING PACKAGE Continued...

7110 Transporting Lights (4 Halogen Transport Lights)Includes 2-high and 2-low beam halogen headlights.

In Base Price

7130 Grading Lights (10 Halogen Lights)Includes light code 7110 Transporting Lights plus (6) additional work lights (2 - bottom cab, 2 -mid-frame, 2 - reversing lights on rear grill).

976.00

7160 Deluxe Grading Lights (18 Halogen Lights)Includes light code 7130 Grading Lights plus (8) additional work lights (4 - corner cab, 2 - front cab,and 2 - right-side cab roof).

1,543.00

7180 Premium Grading Lights (18 LED Lights)Same lighting locations as light code 7160 Deluxe Grading Lights, all Premium Grading Lights areLED.

9,950.00

OPERATOR STATIONROPS/FOPS Air Conditioned Cab

5020 Low Cab w/ Fixed Lower Front and Side Windows In Base Price

5025 Low Cab w/ Fixed Lower Front and Side Opening Windows 826.00

5030 Low Cab w/ Lower Front and Side Opening WindowsIncludes Roof Wiring Harness for Lighting, Beacon, Precleaner and Heated Mirrors

1,107.00

5060 Grade Pro Low Cab w/ Lower Front and Side Opening WindowsRequires configuration code1020 and seat code 6140.Requires (1) T244325 bracket to optionally move monitor to the RH door post.

In Configuration

REAR CAMERA8810 Rear Camera 2,267.00

8820 No Rear Camera In Base Price

AIR CONDITIONER SYSTEM8510 Air Conditioner Refrigerant Charged In Base Price

8520 Air Conditioner Refrigerant NOT ChargedFor Export only to allow cab removal for shipping in containers.

No Charge

EXTERIOR MIRRORS8210 Exterior Mounted Rearview Mirrors In Base Price

8220 Heated Exterior Mounted Rearview Mirrors 508.00

POWER CONVERTER8110 24-to-12 Volt Converter (15 amps peak / 10 amps continuous) In Base Price

8120 24-to-12 Volt Converter (30 amps peak / 25 amps continuous)Recommend code 8120 for additional 12 volt needs, such as business band or CB radios

419.00



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

POWER CONVERTER Continued...

RADIO8415 Premium AM/FM Radio with Bluetooth, Aux, Weather Band (WB), and XM Ready

Requires engine code 1125 or 1140.1,350.00

8410 AM/FM Radio with Aux and Weather Band (WB) 876.00

8420 No Radio In Base Price

LOWER FRONT WINDOW WIPER & WASHER8310 Lower Front Intermittent Wiper & Washer 596.00

8320 Less Lower Front Window Wiper & Wiper In Base Price

CAB AIR PRECLEANER6010 Powered Cab Air Precleaner

Powered Cab Precleaner pre-filters outside air to significantly extend cab filter life.824.00

6030 No Powered Cab Air Precleaner In Base Price

SEAT6120 Standard Fabric Air Suspension Seat with Armrests and Headrest

For use with cab codes 5020, 5025, 5030 & 5035In Base Price

6130 Premium Heated, Leather/Fabric, High-Wide Back, Air Suspension Seat with ArmrestsFor use with cab codes 5020, 5025, 5030 & 5035.This seat does not include a headrest. If a headrest is desired, please order AT361342 from serviceparts.

661.00

6140 Grade Pro Premium Heated, Leather/Fabric, High-Wide Back Air Suspension SeatFor use with cab codes 5060 & 5070.This seat does not include a headrest. If a headrest is desired, please order AT361342 from serviceparts.

In Configuration

ALTERNATOR1210 100 amp Alternator

Cannot be used with engine code 1140.In Base Price

1220 130 amp Alternator 367.00

1240 200 amp AlternatorRequires engine code 1140.

850.00

1235 130 amp AlternatorRequires engine code 1140.

367.00

MOLDBOARDS w/DURA-MAX CUTTING EDGES & END BITS2010 12 Ft. x 24 In. x 7/8 In. (3.66 M x 610 mm x 22 mm) with 6 In. x 5/8 In. (152 x 16 mm) Cutting Edge

and 5/8 in. (16mm) HardwareIn Base Price



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

MOLDBOARDS w/DURA-MAX CUTTING EDGES & END BITSContinued...

2020 12 Ft. x 24 In. x 7/8 In. (3.66 M x 610 mm x 22 mm) with 8 In. x 3/4 In. (203 x 19 mm) Cutting Edgeand 5/8 in. (16mm) Hardware

355.00

2030 12 Ft. x 27 In. x 1 In. (3.66 M x 686 mm x 25 mm) with 8 In. x 3/4 In. (203 x 19 mm) Cutting Edgeand 5/8 in. (16mm) Hardware

907.00

2040 13 Ft. x 27 In. x 1 In. (3.96 M x 686 mm x 25 mm) with 8 In. x 3/4 In. (203 x 19 mm) Cutting Edgeand 5/8 in. (16mm) Hardware

1,082.00


1,206.00


1,396.00

2070 14 Ft. x 27 In. x 1 In. (4.27 M x 686 mm x 25 mm) with 8 In. x 3/4 In. (203 x 19 mm) Cutting Edgeand 5/8 in. (16mm) HardwareRequires engine code 1120, 1125 or 1140.

1,779.00

2080 14 Ft. x 27 In. x 1 In. (4.27 M x 686 mm x 25 mm) with 8 In. x 3/4 In. (203 x 19 mm) Cutting Edgeand 3/4 in. (19mm) HardwareRequires engine code 1120, 1125 or 1140.

1,819.00

BLADE IMPACT ABSORPTION SYSTEM1910 Blade Impact Absorption System

Protects Moldboard and draft frame from impacts with Stationary objects3,222.00

1920 No Blade Impact Absorption System In Base Price

TRANSMISSION5510 Autoshift Transmission 1,669.00

5520 Manual Shift Transmission (no Autoshift) In Base Price

HYDRAULIC CONTROLS - RIGHT SIDESTANDARD HYDRAULIC CONTROLSIndustry standard manual hydraulic controls. Includes valves, control levers, and plumbing.

6510 Base Hydraulics - 4 Function ControlsRequires configuration code 1010.Base Functions: Rear Steer, Circle Side shift, Wheel Lean & RH Blade Lift w/ Float.

In Base Price

6520 Base Hydraulics w/ 1 Auxiliary Function ControlRequires configuration code 1010.Base functions plus 1 function w/float control - front plumbing and hoses for Scarifier or auxiliaryapplication.For use with front scarifier.

1,481.00

6525 Mid Mount Scarifier Base Hydraulics w/ 1 Auxiliary Function ControlRequires Mid Mount Scarifier code 6730 and configuration code 1010.Midmount scarifier base hydraulics with 1 auxiliary function control with float control for mid mountscarifier.For use with mid mount scarifier.

1,680.00



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

HYDRAULIC CONTROLS - RIGHT SIDE Continued...6530 Base Hydraulics w/ 2 Auxiliary Function Controls

Requires configuration code 1010.Base functions plus 2 functions w/float control - front plumbing and hoses for Scarifier and/orauxiliary application.For use with front scarifier.

2,795.00

6540 Base Hydraulics w/ 3 Auxiliary Function ControlsRequires code 1010.Base Functions plus 3 functions-(2) with and (1) w/o float control, front plumbing and hoses forScarifier and/or auxiliary application.For use with front scarifier.

4,108.00

GRADE PRO CONTROLSFinger-tip armrest mounted controls, consistent with the industry standard pattern. Includes armrestmounted lever steering plus the traditional steering wheel.All Auxiliary codes include front and rear plumbing for each Auxiliary function except code 6595.

6550 Grade Pro Controls with Base FunctionsRequires code 1020.Grade Pro Base Hydraulics Functions:

Rear SteerCircle Side shiftWheel LeanRight and Left hand Blade Lift w/ FloatCircle RotateBlade Side ShiftBlade TiltLever Steering (also includes steering wheel)

In Configuration

6555 Grade Pro Controls w/1 Rear Auxiliary Function and Left Hand Lever ControllerRequires code 1020.Base functions plus 1 auxiliary function w/float control - Rear plumbing and hoses for Ripper orauxiliary application.For Use with Rear Ripper.

1,482.00

6526 Grade Pro Controls for Mid Mount Scarifier w/1 Auxiliary Function ControlRequires codes 1020 and Mid Mount Scarifier code 6730.

1,680.00

6560 Grade Pro Controls w/1 Front Auxiliary Function Control and Right Hand Lever ControllerRequires code 1020.Base functions plus 1 FRONT auxiliary function w/float control - front plumbing and hoses forScarifier and/or auxiliary application.For Use with Front Scarifier.

1,482.00

6570 Grade Pro Controls w/1 Rear Auxiliary Function Control and Right Hand Lever ControllerRequires code 1020.Base functions plus 1 REAR auxiliary function w/float control - rear plumbing and hoses for auxiliaryapplication.

1,482.00

6585 Grade Pro Controls w/1 Front, 1 Rear Auxiliary Function Control with Right and Left handControllers and 2 Miniature Multi Axis JoysticksRequires code 1020.Base Functions plus 2 auxiliary functions - 1 front and 1 rear with float control and plumbingScarifier / Ripper applications.Auxiliary functions have reconfigurable controls.

2,996.00



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

HYDRAULIC CONTROLS - RIGHT SIDE Continued...6580 Grade Pro Controls w/1 Front Auxiliary Function and 2 Rear Auxiliary Functions with Right and

Left hand Controllers and 2 Miniature Multi Axis JoysticksRequires code 1020.Base Functions plus 3 auxiliary functions- 1 front and 2 rear auxiliary functions w/ float control andrear plumbing for Scarifier / Ripper and/or front, mid or rear auxiliary applications.Auxiliary functions have reconfigurable controls.

4,444.00

6590 Grade Pro Controls w/1 Front Auxiliary Function and 3 Rear Auxiliary Functions with Right andLeft hand Controllers and 2 Miniature Multi Axis JoysticksRequires code 1020.Base Functions plus 4 auxiliary functions - 1 front and 3 rear with float control and plumbing forScarifier/Ripper and/or front, mid and rear auxiliary applications.Auxiliary functions have reconfigurable controls.

5,926.00

6595 Grade Pro Controls w/3 Front and 3 Rear Auxiliary Function Controls with Right and Left handControllers and 2 Miniature Multi Axis JoysticksRequires code 1020.Base Functions plus 6 auxiliary functions-3 front and 3 rear with float control on 4 functions, andincludes front and rear plumbing for 2 Functions each.Auxiliary functions have reconfigurable controls.

8,888.00

HYDRAULIC CONTROLS - LEFT SIDESTANDARD HYDRAULIC CONTROLSIndustry standard manual hydraulic controls. Includes valves, control levers, and plumbing.

6610 Base Hydraulics- 4 Function ControlsRequires code 1010.Base Functions: LH Blade Lift w/ Float, Blade Side shift, Circle Rotate, Blade Tilt.

In Base Price

6620 Base Hydraulics w/ 1 Auxiliary Function ControlRequires code 1010.Base Functions plus 1 function w/float control and lines for Ripper or auxiliary application.For Use with Rear Ripper/Scarifier Combination.

1,303.00

6630 Base Hydraulics w/2 Auxiliary Function ControlRequires code 1010.Base functions plus 2 functions w/float control and lines for Ripper and/or auxiliary application.For Use with Rear Ripper/Scarifier Combination.

2,629.00

6640 Base Hydraulics w/ 3 Auxiliary Function ControlRequires code 1010.Base Functions plus 3 functions-(2) with and (1) w/o Float Control, and lines for Ripper and/orauxiliary application.For Use with Rear Ripper/Scarifier Combination.

3,942.00

GRADE PRO CONTROLS

6650 Grade Pro Controls - Left SideRequires code 1020.Accompanies GRADE PRO CONTROLS - RIGHT SIDE order code selection.

In Configuration

HYDRAULIC OIL5810 Oil, SAE 10W30 In Base Price

5830 Oil, Hydrau All Season XRJohn Deere Premium Synthetic Hydraulic FluidProvides working range of -40 C (-40 F) to 40 C (104 F).

650.00



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

HYDRAULIC OIL Continued...Required for unit 3R

QUICK SERVICE GROUP1310 Quick Service Group 463.00

1320 No Quick Service Group In Base Price

FUEL FILTRATION1410 Standard Fuel & Water Filtration In Base Price

1420 Severe Duty Fuel & Water Filtration SystemFor use where fuel quality is questionable and/or additional water separation is required. Filter basecontains fuel heater.

470.00

HYDRAULIC PUMP DISCONNECT1610 Hydraulic Pump Disconnect

Required with engine code 1140.Required for Canada and Russia.

167.00

1620 No Hydraulic Pump Disconnect In Base Price

TRANSMISSION SOLENOID GUARD5710 Transmission Solenoid Valve Guard

Required with engine code 1140.Required for Canada and Russia.Recommended for snow plowing applications

190.00

5720 NO Transmission Solenoid Valve Guard In Base Price

FRONT ATTACHMENTS6750 Less Front Attachment In Base Price

6710 Front Push Block 3,732.00

6720 Front ScarifierIncludes Front Hydraulics, plumbing and hosesScarifier with 2 pitch positions and 9 shank pocketsFive 1 x 3 inch Scarifier Shanks w/teethIf additional shanks are desired order (1) each of T6Y5230 Tooth, T114792 Shank and T104223Retainer for each set.Can not be used with 6550 Hydraulics.

8,047.00

6730 Mid-Mount Scarifier with Integrated Front Push PlateRequires hydraulic code 6525 or 6526Mid-Mount Scarifier with Push Block Can not be used with Front Scarifier.Not for use with Front Fenders Code 7810.Recommend Rear Counterweight for better machine balance.

14,346.01

6740 Balderson Style Front Lift GroupRequires hydraulic code 6520, 6530, 6540, 6560, 6580, 6585, 6590, or 6595.(2) AT367896 Mating Hooks from Parts are available to convert old front attachments to theBladerson-style lift group.

6,415.00



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

FRONT ATTACHMENTS Continued...6770 Front-Mounted Dozer Blade, 97 in. x 37.6 in. (2464 mm x 955 mm)

Requires control valve code 6520, 6530, 6540, 6560, 6580, 6585, 6590 or 6595.Requires 14.0 x 24 tire code 4000, 4312, 4313, 4317, 4318, 4411, 4412, 4416, 4417, 4421, 4422,4426, or 4427.

8,793.00

6780 Front-Mounted Dozer Blade, 105 in. x 37.6 in. (2667 mm x 955 mm)Requires control valve code 6520, 6530, 6540, 6560, 6580, 6585, 6590 or 6595.

Cannot be ordered with 4810 (550)

8,957.00

REAR ATTACHMENTS6850 No Rear Attachment In Base Price

6810 Rear Mounted Ripper/Scarifier Combination with Rear Hitch and PinIncludes Rear mounted Ripper/Scarifier with rear hitch and pin.NeverGrease Pin Joints.Three 2 x 5 in. Ripper Shanks w/teeth.Does not include Scarifier Shanks w/teeth (offered in code 9430: (9) Extra Scarifier Shanks w/TeethFor Rear Ripper/Scarifier)Can not be used with codes 6550, 6560 or 6610.Recommend Front Push Block (or other front equipment) for proper weight distribution andperformance.

15,833.00

6820 Rear Counterweight with Rear Hitch and Pin1600 lbs.(725.7 kg.) Rear Counterweight.Recommend for use with Front / Mid Scarifier.

2,361.00

6830 Rear Hitch and PinNot for use with Rear Ripper/Scarifier.

455.00

SIX TIRES AND RIMSAll Tires are Tubeless unless stated differently and include rims. Each selection includes a set of 6tire/rim assemblies. All tires are mounted on 1 pc rims unless stated otherwise.LOAD RATING SHALL BE MATCHED FOR EQUIPMENT WEIGHT.

4312 14.0 - 24 In. 12 PR SGG Firestone G2 Bias Tires w/ 1 pc. RimsBias Ply Tires:Maximum per tire load 6800 lbs.

13,864.00

4313 14.0 - 24 In. 12 PR Titan G2 Bias Tires w/ 1 pc. RimsBias Ply Tires:Maximum per tire load 6800 lbs.

7,188.00

4317 14.0 - 24 In. 12 PR SGG Firestone G2 Bias Tires w/ 3 pc. RimsBias Ply Tires:Maximum per tire load 6800 lbs.

15,638.00

4318 14.0 - 24 In. 12 PR Titan G2 Bias Tires w/ 3 pc. RimsBias Ply Tires:Maximum per tire load 6800 lbs.

8,625.00

4411 14.0 R 24 Inch G2/L2 Single Star XGLA2 Michelin Radial Tires w/ 1 pc. RimsRadial Tires:Recommended for puncture resistance, fueleconomy and increased traction.Maximum per tire load 7828 lbs.

19,777.00



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

SIX TIRES AND RIMS Continued...4412 14.0 R 24 Inch G2/L2 Single Star VUT Bridgestone Radial Tires w/ 1 pc. Rims

Radial Tires:Recommended for puncture resistance, fueleconomy and increased traction.Maximum per tire load 7828 lbs.

17,686.00

4416 14.0 R 24 Inch G2/L2 Single Star XGLA2 Michelin Radial Tires w/ 3 pc. RimsRadial Tires:Recommended for puncture resistance, fueleconomy and increased traction.Maximum per tire load 7828 lbs.

21,828.00

4417 14.0 R 24 Inch G2/L2 Single Star VUT Bridgestone Radial Tires w/ 3 pc. RimsRadial Tires:Recommended for puncture resistance, fueleconomy and increased traction.Maximum per tire load 7828 lbs.

19,736.00

4421 14.0 R 24 Inch G2/L2 Single Star Sno-plus Michelin Radial Tires w/ 1 pc. RimsRadial Tires:Recommended for puncture resistance, fuel.economy and increased traction.Maximum per tire load 7828 lbs.

24,036.00

4422 14.0 R 24 Inch G2/L2 Single Star VSW Bridgestone Radial Tires w/ 1 pc. RimsRadial Tires:Recommended for puncture resistance, fuel.economy and increased traction.Maximum per tire load 7828 lbs.

22,448.00

4426 14.0 R 24 Inch G2/L2 Single Star Snow-plus Michelin Radial Tires w/ 3 pc. RimsRadial Tires:Recommended for puncture resistance, fuel.economy and increased traction.Maximum per tire load 7828 lbs.

26,083.00


24,495.00

4512 17.5 - 25 In. 12 PR G2/L2 SGG Firestone Bias Tires w/ 1 pc. RimsBias Ply Tires:Maximum per tire load 6400 lbs.

15,973.00

4514 17.5-25 SGLDL2A 12 ply L2/G2 TL Goodyear Bias Tire 13,377.00

4517 17.5 - 25 In. 12 PR G2/L2 SGG Firestone Bias Tires w/ 3 pc. RimsBias Ply Tires:Maximum per tire load 6400 lbs.

18,520.00

4519 17.5-25 SGLDL2A 12 ply L2/G2 TL Goodyear Bias Tire 15,608.00

4611 17.5 R 25 Inch L2 Single Star XTLA Michelin Radial Tires w/ 1 pc. RimsRadial Tires:Recommended for puncture resistance, fueleconomy and increased traction.Maximum per tire load 8048 lbs.

22,956.00

4612 17.5 R 25 Inch L2 Single Star VUT Bridgestone Radial Tires w/ 1pc. Rims 21,489.00



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

SIX TIRES AND RIMS Continued...Radial Tires:Recommended for puncture resistance, fueleconomy and increased traction.Maximum per tire load 8048 lbs.

4613 17.5 R 25 Inch L2 Single Star TGD2 Titan Radial Tires w/ 1 pc. RimsRadial Tires:Recommended for puncture resistance, fueleconomy and increased traction.Maximum per tire load 8048 lbs.

13,361.00

4614 17.5R25 1 Star GP2B L3/G3 6S TL Goodyear Radial Tire W/ 1 pc. Rim 18,107.00

4616 17.5 R 25 Inch L2 Single Star XTLA Michelin Radial Tires w/ 3 pc. RimsRadial Tires:Recommended for puncture resistance, fueleconomy and increased traction.Maximum per tire load 8048 lbs.

25,503.00

4617 17.5 R 25 Inch L2 Single Star VUT Bridgestone Radial Tires w/ 3pc. RimsRadial Tires:Recommended for puncture resistance, fueleconomy and increased traction.Maximum per tire load 8048 lbs.

24,037.00

4618 17.5 R 25 Inch L2 Single Star TGD2 Titan Radial Tires w/ 3 pc. Rims 15,422.00

4619 17.5R25 1 Star GP2B L3/G3 6S TL Goodyear Radial Tire w/ 3 pc. Rims 20,249.00

4621 17.5 R 25 Inch G3/L3 Single Star XHA Michelin Radial Tires w/ 1 pc. RimsRadial Tires:Recommended for puncture resistance, fueleconomy and increased traction.Maximum per tire load 8048 lbs.

25,734.00

4626 17.5 R 25 Inch G3/L3 Single Star XHA Michelin Radial Tires w/ 3 pc. RimsRadial Tires:Recommended for puncture resistance, fueleconomy and increased traction.Maximum per tire load 8048 lbs.

28,677.00

4631 17.5 R 25 Inch G2/L2 Single Star Sno-plus Michelin Radial Tires w/ 1 pc. RimsRadial Tires:Recommended for puncture resistance, fuel.economy and increased traction.Maximum per tire load 8048 lbs.

27,129.00


24,413.00

4633 17.5R25 2 Star AS3A L3/G3 4S TL Goodyear Radial TireAll Season, Superior traction on all surfaces, Minimize use of chains, Maximum per tire load 10,500lbs.

26,006.00

4636 17.5 R 25 Inch G2/L2 Single Star Sno-plus Michelin Radial Tires w/ 3 pc. RimsRadial Tires:Recommended for puncture resistance, fuel.economy and increased traction.

30,074.00



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

SIX TIRES AND RIMS Continued...Maximum per tire load 8048 lbs.


27,357.00

4000 Less Tires & WheelsNOT AVAILABLE FOR UNIT 3R & 48

In Base Price

FRONT FENDERS7810 Front Fenders 1,670.00

7820 No Front Fenders In Base Price

SOUND ABSORPTION PACKAGE8710 Sound Absorption Package

Requires engine code 1110, 1115, 1120, or 1125.736.00

8720 No Sound Absorption PackageRequires engine code 1110, 1115, 1120, or 1125.

In Base Price

8730 No Sound Absorption PackageRequires engine code 1140.

In Base Price

LANGUAGE DECALS2605 English Labels and Decals No Charge

2610 Spanish Labels and Decals No Charge

2615 French Labels and Decals No Charge

2620 Russian Labels and DecalsNOTE: Requires 3R

No Charge

2625 Portuguese Customer Delivery Packet No Charge

SPECIAL EQUIPMENT - ORDER AS DESIREDPOWERTRAIN

COLD START

9395 Adjusting Rotary Ejector PrecleanerRequires code 9380Ability to raise engine pre-cleaner to improve air filter performance.

495.00

9380 Heavy Duty Air Cleaner - 9.0L 14 inEngine code 1140 only15% larger capacity

895.00



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - ORDER AS DESIRED Continued...9340 Engine Air Intake Manifold Pre-Heater

Requires code 1120 9.0 L Engine.Cannot be used with code 9370 ether start aid.

524.00

9360 Engine Coolant Heater - 120 Volt / 1500 WattRecommended for use on machines that will be operating above 8,000 Feet in altitude, and/or colderthan 0 degrees F (-18 degrees C).For below 0 degrees F (-18 degrees C) recommend code 1610 Hyd. Pump Unloader.

310.00

9370 Ether Starting AidRequires 9.0L engine, codes 1120, 1125, or 1140Cannot be used with code 9340, Engine Air Intake Manifold Pre-Heater

Ether can not included.

426.00

9620 Cold Weather Control Valve CoversPlastic covers that mount below the cab, shielding the control valve from snow and slowing downhydraulic heat loss in winter.Requires code 1010 standard hydraulics.

184.00

ELECTRICAL

9273 Right Side Engine Compartment Work Light 210.00

9200 Level 1 Electronic Corrosion Prevention PackageCorrosion Preventive Treatment for critical electronic connections.Requires code 5710 Transmission Solenoid Valve Guard.

1,836.00

9270 Tall ( 26in.(660mm) higher than Standard Frame Lights) Front Snow Plow Light BarNot for use with code 6730 Mid Mount Scarifier.

317.00

OPERATOR STATION EQUIPMENT

9298 Beacon with Flip Down Cab Beacon Bracket (RH)Includes beacon and bracket.Order codes 9298 and 9299 for dual beacons.

606.00

9299 Beacon with Flip Down Cab Beacon Bracket (LH)Includes beacon and bracket.Order codes 9298 and 9299 for dual beacons.

606.00

9290 Flip Down Cab Beacon Bracket (RH)Order codes 9290 and 9295 for dual beacon brackets.

141.00

9295 Flip Down Cab Beacon Bracket (LH)Order codes 9290 and 9295 for dual beacon brackets.

141.00

9120 Front Window Movable Sun Visor 135.00

9130 Rear Retractable Sun Shade 202.00

9210 Decelerator 212.00

9220 5.0 lbs. multi purpose (ABC) Dry Chemical Fire Extinguisher 117.00



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - ORDER AS DESIRED Continued...MOLDBOARD AND CIRCLE ADDITIONAL EQUIPMENT

9465 24 in. Right Hand Moldboard ExtensionRequires moldboard code 2060, 2070, 2080, or 2081.Available to all other units with no restrictions.

1,975.00

9460 24 in. Left Hand Moldboard ExtensionRequires moldboard code 2060, 2070, 2080 or 2081.Not available for units 3R & 48.

1,975.00

9450 Reversible Overlay End BitsNot available for unit 3R & 48.

454.00

SCARIFIER and RIPPER ATTACHMENTS

9430 (9) Extra Scarifier Shanks w/Teeth For Rear Ripper/ScarifierRequires Code 6810 Ripper/Scarifier.

1,292.00

9440 (2) Extra Ripper Shanks w/Teeth For Rear Ripper/ScarifierRequires Code 6810 Ripper/Scarifier.

1,090.00

OVERALL VEHICLE

9475 Fast Fill Fuel System150 gpm fill rate.

2,419.00

9280 Slow Moving Vehicle (SMV) Sign 77.00

9285 License Plate Bracket for Brazil 74.00

9310 French Decals and Labels No Charge

9330 Finish Paint Less DecalsFor use when custom paint is requiredDecals packaged with machine.Some decals installed.

No Charge

9630 Secondary Steering 3,853.00

9909 Non-Export Rust Preventive Coating 216.00

WHEEL FENDERS

9005 Rear Wheel Fenders18.75 in.(476mm) Rear Wheel FendersFenders are not for use with 550 tires.Fenders can only be used with chains that are designed for 3" of radial clearance and 1.75" ofsidewall clearance.Use of Tire chains permitted in accordance with SAE J683, and requires removal of front mud flap onrear fenders.

3,146.00

MOTOR GRADER SIMULATORMotor Grader Operator Training Simulator

- JD Bookstore order code: SIM5800- JD Bookstore price: $23,499

Includes software, replica GP joysticks, foot petals, steering wheel,Shift column and integrated seat.Item ordered through the JD Bookstore.



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

RUSSIAN PACKAGE CODESRUSSIAN OPTIONS

ATTACHMENTS FOR FIELD CONVERSIONF.O.B. Dubuque, Iowa for dealer-installed kits, except where noted. Some of the following kits mayrequire additional parts for a complete installation. Prior to ordering, check the installationinstructions by going to www.johndeeretechinfo.com and clicking on Library, or by clicking on thisHyperlink ( Installation Bulletin Search ), and insert the AT number to retrieve the attachmentinstallation instruction bulletin for additional parts.Exception to above note is FRONTIER Dealer Installed Kits.

AT410719 Fast Fuel Tank Kit for IT4This is a complete tank replacement with fast fuel ports.

2,752.00

AT410718 Fast Fuel Tank Kit for non-IT4This is a complete tank replacement with fast fuel ports.

2,710.00

Attachments and Accessories:

AT359016 IGC Mast Mounts(2) 573.00

Cold Start:

AT367470 Diesel Fuel-Fired Engine Coolant Heater Kit For 9.0L T3 EnginesIncludes igniter, timer and coolant circulation pump.Recommended for temperatures below -13°F (-25°C).Average installation, 6 hours.

3,461.00

AT413822 Diesel-Fired Coolant Heater Kit, 10kWFor Russia OnlyFor use on 6.8L and 9.0L engines.Includes plastic fuel tank.

5,056.00

AT413817 Diesel-Fired Coolant Heater Kit, 10kWFor Russia OnlyFor use on 6.8L engine.Includes installation by JRB.Includes plastic fuel tank.

7,326.00

AT413818 Diesel-Fired Coolant Heater Kit, 10kWFor Russia OnlyFor use on 9.0L engine.Includes installation by JRB.Includes plastic fuel tank.

7,141.00

Frame Attachment:

AT421646 Dual Input Circle Drive Gearbox (with Slip Clutch)Protects circle, circle drive gearbox and draft frame from damage when end of moldboard comes incontact with stationary objects. Slip clutch is integral to the circle drive assembly and utilizes a wetclutch system. Cannot be used with code 2220 inserts.

Note: For use with G-series (code 1010 Standard Hydraulic Controls)

5,914.00



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT421648 Dual Input Circle Drive Gearbox (with Slip Clutch)

Protects circle, circle drive gearbox and draft frame from damage when end of moldboard comes incontact with stationary objects. Slip clutch is integral to the circle drive assembly and utilizes a wetclutch system. Cannot be used with code 2220 inserts.

Note: For use with G-series (code 1020 "Grade Pro" Electro Hydraulic Controls)

5,914.00

AT421647 Dual Input Circle Drive Gearbox (without Slip Clutch)Note: For use with G-series (code 1010 Standard Hydraulic Controls)

3,619.00

AT421649 Dual Input Circle Drive Gearbox (without Slip Clutch)Note: For use with G-series (code 1020 "Grade Pro" Electro Hydraulic Controls)

3,619.00

AT345815 Front Wheel Fenders18.75 in.(476mm) Front Wheel FendersNot for use with 550 Tires.Use of Tire chains permitted in accordance with SAE J683.

1,586.00

AT341060 Grade Pro Moldboard Impact Absorption SystemFor only Grade Pro G-Series Graders.

3,222.00

AT343639 Moldboard Impact Absorption System 3,672.00

AT367788 Rear Counterweight with Rear Hitch and Pin1600 lbs.(725.7 kg.) Rear Counterweight.Recommend for use with Front / Mid Scarifier.

3,575.00

AT339398 Rear Hitch and Pin 550.00

AT363483 Rear Mounted Ripper/Scarifier CombinationIncludes Rear mounted ripper/Scarifier with rear hitch and pinThree 2 x 5 inch ripper shanksCylinders and hoses for rear ripper/Scarifier. When not equipped with front mounted equipment,requires Ripper Hydraulics.Cannot be used with rear hitch.Requires 5th section valve code 6620 or order AT317288Average installation, 8 hours.

14,071.00

AT415551 Rear Scarifier Shanks (9)Includes nine (9) each of shanks, retainers, and holders.

1,074.00

AT400762 Rear Wheel Fenders18.75 in.(476mm) Rear Wheel FendersFenders are not for use with 550 tires.

Use of Tire chains permitted in accordance with SAE J683, and requires removal of front mud flap onrear fenders.

4,720.00

AT339396 Slow Moving Vehicle Emblem and Mounting Bracket 90.00

AT370909 Slow Moving Vehicle Emblem and Mounting Bracket 90.00

Front Attachments:

AT367896 Balderson Lift HookFor customers ordering Balderson front lift group, it will require 2 mating hooks to adapt their oldfront attachments over to the Balderson style lift group.

See Parts

AT365788 Balderson Style Front Lift Group 6,417.00



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT400912 Dozer Blade, 105 in. (2667 mm) 8,957.00

AT400904 Dozer Blade, 97 in. (2464 mm) 8,793.00

AT363681 Front Push Block 4,070.00

AT365183 Front ScarifierIncludes:Scarifier with 2 pitch positions and 9 shank pocketsFive 1 x 3 in. Scarifier shanksCylinder and hosesRequires 5th Function Hydraulics.Average installation, 2 hours.

8,047.00

AT363364 Mid-Mount Scarifier with Front Push BlockRequires code 6525 Hydraulics.Mid-Mount Scarifier with Push Block Can not be used with Front Scarifier.Not for use with Front Fenders.Recommend Rear Counterweight for better machine balance.

14,998.00

Hydraulics:

AT317288 5 Function valve section and linkage Left Kit 848.00

AT317287 5 Function valve section and linkage Right Kit 1,044.00


AT317289 6 Function valve section and linkage Right Kit 1,049.00


AT317291 7 Function valve section and linkage Right Kit 733.00

AT363988 Grade Pro EH Controls Hydraulics Auxiliary SectionFor only Grade Pro G-Series Graders.Requires mini joystick and or dual control levers.

1,482.00

AT317339 One Hand Blade Lift KitTo convert two-hand blade lift controls to one-hand controls on the right side, when the machine isNOT already equipped with a RH 5th function valve.

676.00

Operator Environment:

AT300765 AM/FM/WB Radio with CD Player 985.00

AT408630 Beacon Strobe kit 211.00

AT404414 Heated Mirror Circuits Kit 190.00

AT349372 MP3/iPod/Sat Radio/Cell Phone holder w/ 2 Power Ports and Cargo Netkit includes a cargo net, bracket/holder, wire harness, 2 power ports, plastic holder,and instructions.

148.00



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...T244325 Monitor Bracket

This bracket is required to move the monitor to the RH door post when a customer adds (IGC)Integrated Grade Control.GradePro units would have a high take rate, but also governmental customers who get the rearcamera might want it for easier viewing of the camera.

See Parts

AT399788 Single LED work light with high beam lensReplacement for both 12V & 24V work and drive lamps.

388.00

AT399789 Single LED work light with symmetric lensReplacement for both 12V & 24V work and drive lamps.

388.00

AT431224 Slope Meter Mounting Bracket 45.00

Overall Vehicle:

AT318620 Beacon Bracket KitFor Right or Left cab side.

239.00

AT302544 Blade Lift Lever Kit 134.00

AT307730 Moldboard Extension, 24 X 24 X 7/8 In. Left Hand7/8 in. (22mm) thick.Includes 5/8 in. (17mm) Hardware.Cutting Edge is not included.

2,261.00

AT307731 Moldboard Extension, 24 x 24 x 7/8 In. Right Hand7/8 in. (22mm) thick.Requires 5/8 in. (17mm) Hardware.Cutting Edge is not included.

2,261.00

AT307732 Moldboard Extension, 27 X 24 X 1 In. Left Hand1 in. ( 25mm) ThickIncludes 5/8 in. (17mm) Hardware.Cutting Edge is not included.

2,261.00

AT307733 Moldboard Extension, 27 X 24 X 1 In. Right Hand1 in. ( 25mm) ThickIncludes 5/8 in. (17mm) Hardware.Cutting Edge is not included.

2,261.00

AT341307 Moldboard Extension, 27 X 24 X 1 In. Right Hand1 in. ( 25mm) ThickIncludes 3/4 in. (19mm) Hardware.Cutting Edge is not included.

2,261.00

AT341306 Moldboard Extension, 27X 24 X 1 In. Left Hand1 in. ( 25mm) ThickIncludes 3/4 in. (19mm) Hardware.Cutting Edge is not included.

2,261.00

AT367585 Secondary SteeringAverage installation, 12.0 hours.

2,045.00

Powertrain:

AT431337 Autoshift Transmission Field Kit See Parts



06 January 2014US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT380621 Diesel Fuel-Fired Engine Coolant Heater Kit INSTALLED

Parts kit only.2,936.00

AT400906 Diesel Fuel-Fired Engine Coolant Heater Kit INSTALLED 5,540.00

AT369451 Hydraulic Warm up Circuit for Cold Starts 1,116.00

AT371007 Severe Duty Fuel Filter 406.00

AT367966 Severe Duty Fuel Filter for 9.0L T3 Engines 406.00

AT381371 Tandem Axle Grease Bank kitKit provides fittings, mount and lines to both tandem drives.For Graders produced before February 2010.

101.00

REFERRAL ATTACHMENTSTopcon Grade Control SystemKit includes the following equivalent parts from Topcon 3DMC2 system:

Kit, GX-60 GPSKit, Common 3D Grader GPS JD IGC "GP"Assy, MC-R3 NO-OAFOEM, Antenna Config KitOAF Bundle, MC-R3 GGD 3DMC2Password, MC-R3 Full AutoAssy, IMU MC(2) SensorKit, JD GP MC2/Slope/Mainfall BoltAssy, GX60 To J.D. G-Series Console 20 InFull Assembly and Final Calibration On Site

Topcon Grade Control Base Kit Installed (code 2500) contains MC2 sensor bracket and cable.GX-60 bracket is also included.

AT419753 Topcon 3DMC2 Single Antenna with 915SS GSM Radio Field Kit 65,705.00

AT419752 Topcon 3DMC2 Single Antenna with 915SS Radio Field Kit 64,205.00

AT419755 Topcon 3DMC2 Single Antenna with UHF GSM Radio Field Kit 65,730.00

AT419754 Topcon 3DMC2 Single Antenna with UHF Radio Field Kit 64,230.00

AT419756 Topcon 3DMC2 Single Antenna with UHF Sprint Radio CDMA Field Kit 65,730.00

AT419757 Topcon 3DMC2 Single Antenna with UHF Verizon CDMA Radio Field Kit 65,730.00

AT419759 Topcon 3DMC2 Twin Antenna with 915SS GSM Radio Field Kit 75,680.00

AT419758 Topcon 3DMC2 Twin Antenna with 915SS Radio Field Kit 74,180.00

AT419762 Topcon 3DMC2 Twin Antenna with Sprint CDMA Radio Field Kit 75,705.00

AT419761 Topcon 3DMC2 Twin Antenna with UHF GSM Radio Field Kit 75,705.00

AT419760 Topcon 3DMC2 Twin Antenna with UHF Radio Field Kit 74,205.00

AT419763 Topcon 3DMC2 Twin Antenna with Verizon CDMA Radio Field Kit 75,705.00



06 January 2014US



06 January 2014US

Documents

CONSTRUCTION PRODUCTS C-5-672G-1 672G · PDF fileJohn Deere Powershift Plus? Direct Drive, Countershaft Powershift Event Based Shifting (EBS) - Load Sensing Electronic Shift Modulation