Construction Product Range

CONSTRUCTIONPRODUCT RANGE

FOR FURTHER DETAILS TEL: 08705 987 841 FAX: 08705 987 8422

Contact Würth

We operate a team of regional sales consultants covering from the north of Scotland down to the tip of Cornwall. All of ourconsultants are fully trained to give you the best advice and service in your field. We also have product specialists who can helpwith queries on any associated products.

Alternatively you can visit one of our nine trade stores we have located around the country. In store not only will you receive greatservice you will find a huge range of products selected to cater for a large variety of trades.

To find out more about the product range, please either contact your local sales consultant orWürth’s customer service centre on08705 987 841 and they will be happy to answer any questions directly.

PAISLEYWürth Trade StoreUnit 16Baltic Business ParkMurray StreetPaisleyRenfrewshirePA3 1QNTel: 0141 404 0779Fax: 0141 848 1346Email: [email protected]

GLASGOWWürth Trade StoreUnit 4London Road Trade ParkLondon RoadGlasgowG32 8YQTel: 0141 404 0778Fax: 0141 778 5027Email: [email protected]

WISHAWWürth Trade StoreUnit 1C, Excelsior ParkWishawLanarkshireML2 0EGTel: 01698 362 350Fax: 0845 880 3011Email: [email protected]

BRADFORDWürth Trade StoreUnit 1, GB Business ParkCutler Heights LaneCutler HeightsBradfordBD4 9HZTel: 0845 880 3012Fax: 0845 880 3013Email: [email protected]

MANCHESTERWürth Trade StoreUnit 9, Alexandria CourtAshton Commerce ParkAshton MossAshton-Under-LyneManchesterOL7 0QNTel: 0844 482 2445Fax: 0844 482 2446Email: [email protected]

BIRMINGHAMWürth Trade StoreUnit 4, Navigation PointGolds Hill WayTiptonWest MidlandsDY4 0PUTel: 0844 482 2443Fax: 0844 482 2444Email: [email protected]

ROMFORDWürth Trade StoreUnit 12, Falcon Business CentreSpilsby RoadHarold HillRomfordEssexRM3 8UBTel: 0844 482 2447Fax: 0844 482 2448Email: [email protected]

CROYDONWürth Trade StoreUnit 3, Croydon Trade ParkTherapia LaneCroydonSurreyCR0 3DYTel: 0844 482 2439Fax: 0844 482 2440Email: [email protected]

PORTSMOUTHWürth Trade StoreUnit 3, Ameiva PointQuartermaine RoadPortsmouthHampshirePO3 5QPTel: 0844 482 2441Fax: 0844 482 2442Email: [email protected]

GLASGOW

WISHAW

PAISLEY

MANCHESTER

BIRMINGHAM

BRADFORD

CROYDON

ROMFORD

PORTSMOUTH

3

Description Art. No . P/Qty500 ml 0892 160 1

PU Cleaner500 ml• For cleaning foamguns. Fits directlyonto gun, to spraythrough.

• Additional spraynozzle to removefresh foam spillsfrom clothing orother surfaces.

Fire Rated Gun Foam• Tested as a fire seal inhorizontal and verticaljoints to BS 476 Part 20 forup to 4 hours.

• Enhanced performance canbe achieved by overcapping with intumescentsealant.

• Single component, easy toapply.

• Also meets Class B1 of DIN4102 Part 1.

* Technical data availableon request.

Contents Art . N o. P/Qty750 ml 0892 152 51 1/12

Contents Art. No . P/Qty500 ml 0892 154 1

Rapid Foam• Use for fastening woodendoor frames, filling andsealing window sills etc.,for insulating and filling-inwall gaps and othercavities.

• An assembly and fillerfoam containing an envi-ronmentally safe propellantmixture in accordance withthe Montreal Protocol forthe protection of the ozonelayer.

• Comes complete with appli-cator nozzle.

• Basis is one-componentpolyurethane pre-polymercuring on contact withmoisture.

Art. No . P/Qty0891 152 2 1

Foam Application Gun• High quality, Teflon coated gun. Ideal for acontrolled, accurate application.

Contents Art. No . P/Qty750 ml 0892 152 1 1/12

FixingFoam• A single component,polyurethane based, gunapplied moisture curingmulti-purpose expandingfoam with many uses in thebuilding and structionindustry.

• Resistant to extremes oftemperature.

• Economical in use.• Once cured, will not rot.• Offers good insulatingproperties.

• Foam yield - approx. 40ltrs.• Offers excellent resistanceto: age, heat, cold, mostchemicals, rot and pests.

• Suitable for gap fillingaround window frames, filling voids around steelwork.

Multistick Panel Adhesive• Suitable for permanentlybonding panel materials,

insulation products, carpets

grippers etc. most buildingsurfaces. Do not use withexpanded polystyrene.

• A high quality, one part

thetic butyl rubber).• High body gives gap fillingproperties.

• Excellent bonding charac-teristics.

or fixing strips.• High slump resistance.Description Contents Art. No . P/QtyCartridge 380 ml 1892 100 100 1/24

Description Contents Art. No . P/QtyCartridge 350 ml 1892 10 350 12

GRIPFILL• Solvent borne rubber resinadhesive.

• High strength, gap filling.• Bonds a large variety ofmaterials.

PUR Rapid ConstructionAdhesive

• Suitable for temperature andwater resistant adhesive jointsbetween pieces of wood andbonds between combinations ofwood, rubber, concrete, polys-tyrene, polyurethane foam andcork, plus combinations of meta land a porous base material.• PUR based single component,paste-type, reactive adhesive.• Hardens in the presence of moisture, therefore, wood containinga moisture level of up to 25%

can be glued using the adhesive.• Does not run.• Able to fill the joint because the adhesiveexpands during the hardening process.

• Resistant to water, dilute acids, dilute alkalisand solvents.

Description Contents Art. No . P/QtyCartridge 380ml 1892 100 380 1/12

• Suitable for fixing skirtingboards, architrave anddado rails, bonding timber-frames to brick and stone,fixing wall panels to bat-tens, bonding floor grip-pers and metal edges (onporous surfaces), wood towood bonding, fixing looseroof tiles and slates, layingcarpet and carpet tiles,bedding and bonding win-dowsills, fixing plaster-board panels partitioning.

• Colour: beige.• Environmentally friendly.• Low odour.• High bond strength.• Quick drying.• Suitable for interior and exterior use.• Can be painted over.• Sandable.• Non-flammable.

Building Adhesive

Description Contents Art . N o. P/QtyCartridge 310 ml 0892 100 101 1/12

• D4 in accordance with DIN EN 204.• Temperature resistant from -30°C to+100°C.

Description Contents Art. No . P/QtyBottle 500 g 0892 100 12 1/20

Fast Setting Wood Glue• Universal glue, PVAc base.• Very fast setting.• Very short open time.• Meets the requirements ofBS EN204 category D3/3.

• Suitable for gluing veneers,large areas of laminate.,carcasses, etc.

Description Art . N o P/QtyFor 310 & 380ml cartridges 1892 999 1

Application Gun

Professional Cartridge Gun• Robust.• Half metal frame.• Good leverage ratio: reduces effort.• Anti-drip device.

Art . N o. P/Qty1891 312 1 1

• Ideal for trade counters.• Two viscosities to suit customers preference.• Activator to speed the curing process.• Activator designed to minimise the riskof yellowing on UPVC surfaces.

Description Contents Art. No . P/QtySuper Glue 20 g 1892 2 25(thick grade) 50 g 1892 212 25Super Glue 20 g 1892 20 25(thin grade) 50 g 1892 212 0 25Activator 200 ml 1892 900 12

Site Line Super Glue andActivator

Sealants and Adhesives

EMAIL: [email protected] OR VISIT WWW.WURTH.CO.UK

Acceleratorand Frost Proofer

• Providesprotection in lowtemperatures.

• Acceleratescement settingtimes.

• Not suitable foruse on steel rein-forced sheets.

• For usage referto the technicaldata sheet.

• Shelf life: 2years.

Contents Art . N o. P/Qty5 litres 1890 12 03 1

Mortar Admix• Improves

workability.• Replaces lime in

the mixture.• Helps prevent

shrinkage andcracking duringdrying.

• Conforms to therequirement ofBS 4887 (1987).

• For usage referto the technicaldata sheet.

• Shelf life: 2years.

• Colour: DarkBrown.


PVA Bond• Multi-purpose

adhesive, sealerand admixture.

• Used for prim-ing unsound sur-faces prior toplastering orpainting.

• Adheres to mostcommon building materials.

• Colour: White• For mixing ratios

see technicaldata sheet on container.


Water Seal• Helps prevent

water ingress onbrick, stone,concrete, ren-dered surfacesetc.

• Dries clear(milky white onapplication).

• Easy to apply bybrush or airlessspray.

• Good coverageapprox. 5 sqmetres per litre(depending onsubstrate).


Description Contents Art . N o. P/QtyAerosol 400 ml 0893 114 114 1/12

Zinc Light Protective Spray• The corrosion resistant zinc

coating in galvanisedcolour.

• For after treatment of dam-aged galvanised workpieces, protects metalagainst corrosion.

• Light, metallic colour. Veryhigh zinc content offersgood resistance to atmos-pheric corrosion.

• High resistance against saltand water.

• Quick-drying, touch dryafter 20 minutes, over paintable after 4hours.

• Can be over-painted with commerciallyavailable artificial resin lacquers.

Alu-Spray• Gives permanent cathodic

corrosion protection to allmetallic surfaces.

• Also applicable on wood,plastic, ceramic, glass etc.

• Remains reliably onsurfaces.

• Fast drying and economicalin use.

• Heat resistant up to 650oC.• Resistant against most acids

and alkalies.• No physiological dangers.

• Suitable for exhaust systems, wheel rims,lorry bodies, air conditioning systems etc.

• 99.5% pure aluminium.

Description Contents Art . N o. P/QtyAerosol 400 ml 0893 105 1/12

Colour Contents Art . N o. P/QtyWhite 600 ml 0893 199 20 1/12Yellow 600 ml 0893 199 21 1/12Red 600 ml 0893 199 22 1/12Blue 600 ml 0893 199 23 1/12

Road Marker• Colour markings for construction sites.• Broad adhesive range. Good adhesion on

absorbent and non-absorbent, as well asslightly moist substrates.

• Fast drying. Ready for traffic after a shorttime.

• Can is used upside down, thus enablingwell-aimed and clear marking.

• High-quality pigments. Colours are non-fading and of high luminosity and opacity.

PE Backfill Material• Non rotting closed cell polyethylene foam• Will not absorb moisture.• Prevents three-point adhesion.• For backfilling, sealing and expanding

joints around window and door frames.par t 4 section 9.4.5.1.

• Colour: grey.

Dimensions Art . N o. P/Qty6 mm x 100 m 0875 806 100 100 m10 mm x 100 m 0875 810 100 100 m15 mm x 100 m 0875 815 100 100 m20 mm x 50 m 0875 820 100 50 m

Complies with BS 8213•


Sealants and Adhesives

5

Cover Caps• Available for flat assembly countersunk

flush or as overlapping for assembly without countersinking.

• Colour: white, light brown or dark brown.

Nylon Frame Anchor

•

Flat OverlappingColour Art. No . A rt. N o. P/QtyWhite 1590 610 001 1590 610 021

Light brown - 1590 610 023Dark brown 1590 610 004 1590 310 024

100/1000

Hammer Fix

Cross-recessed Head Z ( PZD) No. 4Plug Screw

Ø x L mm Ø x L mm Art. No . P/Qty10 x 100 7 x 105 1912 110 100 5010 x 115 7 x 120 1912 110 115 5010 x 135 7 x 140 1912 110 135 5010 x 160 7 x 165 1912 110 160 50

Countersunk Head Si t Driv e 40Plug Screw

Ø x L mm Ø x L mm Art. No . P/Qty10 x 100 7 x 105 1912 510 100 5010 x 115 7 x 120 1912 510 115 5010 x 135 7 x 140 1912 510 135 50

Wall Fixings

Dimensions Screw Min. holeØ x L mm Ø mm depth mm Art. No .

5 x 25 2.6 - 4 29 0903 5 256 x 30 3.5 - 5 35 0903 6 308 x 40 4.5 - 6 40 0903 8 4010 x 50 6.0 - 8 58 0903 10 5012 x 60 8.0 - 10 70 0903 12 6014 x 75 10 - 12 87 0903 14 75

Nylon Dowels

Assortment:• Contents:

0903 4 x 100,0903 55 37 x 50,0903 56 37 x 50,complete withscrews, 1 x manualfitting pliers.

Plastic Expansion Plugs

Drill size ScrewColour mm L mm Art . N o. P/QtyYellow 5 3 - 3.5 1903 67 1 100Red 6 3.5 - 5 1903 67 2 100Brown 7 5 - 6 1903 67 3 100 Dimensions Screw

Colour Ø x L mm L mm Art . N o. P/QtyRed 6 x 36 4.5 0906 006 36 100White 6 x 37 4.5 0906 006 37 100Red 8 x 51 6 0906 008 51 200White 8 x 52 6 0906 008 52 200

Shark Dowels

Plasterboard Screw Fixing

DimensionsDescription Ø x L mm Art . N o. P/QtySynthetic 14.5 x 33 0903 251 200Die cast zinc 14.5 x 33 0903 252 200

Cavity Dowels

Dowel Screw Clamping HoleL mm L mm Range mm Ø mm Art . N o. P/Qty

33 38 5 - 13 6.5 0903 41 10046 52 8 - 20 6.5 090 3 4 4 6 1 10037 50 5 -1 3 10 0903 55 37 1 10052 60 8 - 20 10 0903 55 52 1 10034 50 5 - 13 11 0903 56 37 2 10052 60 8 - 20 11 0903 56 52 2 10065 70 20 - 40 11 0903 56 65 2 100

Art . N o.0964 903

Art . N o.0903 20

Manual Assembly Pliers

1 = combination drive slot and phillips No. 2.2 = combination drive slot and phillips No. 3.

Thread Ø x L HoleØ mm Ømm Art. No . P/QtyM8 10 x 30 10 0904 38 100M10 12 x 34 12 0904 310 100

Brass Dowels• Material: Brass.• Metric internal thread.• Tapered internally for maximum spreading

by screw.• Knurled exterior for extra grip.• Suitable for use in; Concrete, solid stone,

natural stone, solid brick, solid timber &laminated timber.

• Can be used for “Through insertions”.

Amo lll Screw• Stress free spacer assembly screw for wood,

metal and plastic window frames.• Self tapping screw.• No deformation of window frame.• Fastening without wall plug.• Thread with cutting groove provides for

easy insertion of screw.• Screw with milling head for simple self-

countersinking.• Specially suitable for wooden and plastic

window frames.• Thread Ø 7.5 mm• Drive: AW30

Cover caps:- White,- Mahogany Brown.

Screw length = frame width + spacing +inser tion depth.

Range M8-M10Art. No. 1901 8.......

Range M5,M6,M8Art. No. 1903......

0234.....

Art . P reÞx :

0152....

ASSY Masonry Screw

• Countersunk head, Ø 4.0 mm.• Length: 50 to 120 mm.• AW drive for secure insertion.• Suitable for fixing straight into brickwork,

concrete etc without the use of a plug• Substrate MUST be pre-drilled:

3.0 - 3.5 mm for 5 mm dia. screws,3.5 - 4.0 mm for 6 mm dia screws

• AW drive bits required:5mm screws = AW20 (orange)6mm screws = AW30 (yellow)

Finish

Yellow Chromate

• Yellow chromate.

Sizes 72mm-152mm

Anchors


Thru-Bolt Concrete Anchor

Art . P reÞx .1904.....

Anchor Max.Thread Ø x L fixture

Ø mm Art . No. P/QtyM6 12 x 45 10 50M6 12 x 45 25 50M8 14 x 50 10 50M8 14 x 50 25 50M8 14 x 50 40 50M10 16 x 60 10 50M10 16 x 60 25 50M10 16 x 60 50 50M10 16 x 60 75 25M12 20 x 75 10 25M12 20 x 75 25 25


Ø mm Art . No. P/QtyM6 8 x 70 30 50M8 10 x 55 10 50M8 10 x 80 35 50M8 10 x 100 60 50M10 12 x 65 10 50M10 12 x 80 25 50M10 12 x 100 45 25M12 16 x 110 55 10

Order length by maximum thickness of material to beclamped down.

Sleeve Anchor Hex Bolt

P/Qty100

P/Qty100100100100100100

P/Qty100

Ø x L mm Hole Ø mm Art . No.7.5 x 50 6 0901 175 051*

Ø x L mm Hole Ø mm Art . No.10 x 70 8 0901 011 00110 x 80 8 0901 011 00210 x 100 8 0901 011 00312 x 80 10 0901 011 20112 x 100 10 0901 011 20212 x 140 10 0901 011 204

* TX Drive Bit Art. No: 0614 313 0

Pan Head TX Drive:

Ø x L mm Hole Ø mm Art . No.7.5 x 70 6 0901 375 070

Stud Screw:

Hex Head Bolt:

Screw Anchor

Blow Out Pump• For removing dust from holes before

anchors are inserted, used with cleaningbrushes.

Art . No. P/Qty1903 11 1

Cleaning Brushes• For removing dust from holes prior to insert-

ing anchors. Used in conjunction with BlowOut Pump sizes 8 -20mm


Ø mm Art . No. P/QtyM6 12 x 42 25 50M8 14 x 50 15 50M8 14 x 50 40 50M10 16 x 60 50 50M10 16 x 60 70 25M10 16 x 60 70 25M12 20 x 75 70 10

Order length by maximum thickness of material to beclamped down.

Heavy DutyShield Anchor Hex Nut

Chemical Anchor SystemPolyester 380mlPolyester Styrene Free 400mlExpoy Acrylate Styrene Free 400mlPure Vinylester 400mlPure Epoxy 400ml


Ø mm Art . No. P/QtyM6 8 x 40 8 100M8 10 x 50 10 50M8 10 x 75 35 50M8 10 x 100 60 50M10 12 x 60 15 50M10 12 x 75 20 50M10 12 x 100 50 25M12 16 x 65 15 25M12 16 x 110 55 10

Sleeve Anchor Hex Nut

Wire Hanger For Concrete• Steel yellow zinc plated.• Suitable for suspended ceilings & light-

weight signs.

Min. hole Anchordepth mm Ø x L mm Art . No. P/Qty

40 6 x 55 1904 06 55 100 Anchor Max.Thread Ø x L f ixture

Ø mm Lmm Art . No. P/QtyM8 14 x 45 50 1905 208 50M10 16 x 60 65 1905 210 50

M12 12 x 75 85 1905 212 25

Shield Anchor

Anchor Internal.Thread Ø x L thread

Ø mm Art. No . P/QtyM6 8 x 25 9 1904 106 100M8 10 x 30 12 1904 108 100M10 12 x 40 16 1904 110 50M12 15 x 50 18 1904 112 50M16 20 x 65 22 1904 116 25

Thread Ø Art . No.M6 1904 06

Drop-In Anchors

Setting Tool:

M8 1904 08M10 1904 010M12 1904 012M16 1904 016

1905......

1905......

mmL mmL

1905.......

mmL

mm L

1907.......

mmL

• Resin for all applications.• Brick, Blocks, Concrete ...• High Bond Strength• Quick Setting times• Full load data available• Use with studding / Rebar etc..• Non Flammable low odur

mmL

M8,M10,M12

Wurth have Chemical Anchor systemsfor all applications with ETA approval,full technical data and productbackup / support.

Heavy DutyShield Anchor Hex Bolt


Anchors

7

Cal. 6,8 /11M

A Würth DIVA® 1 / PremiumB Würth BST 1, BST 2 / Berner BSG 2, 200, 201C Spit P 60, P 200D Hilti DX 351

E Hilti DX 450F Hilti DX A40G Hilti DX A41H Hilti DX 350, DX 36M, DX 460

Colour Selection Power Usage Art.-Nr .A B C D E F G H

x x x x xx 1864 31x 1864 41 100

1864 51

Art. No.SL mm ds mm dk mm A B C D E F G H

16 x x x x x 0864 101 01619 x x x x x 0864 101 01922 x x x x x 0864 101 02227 x x x x x 0864 101 02732 x x x x x 0864 101 03237 x x x x x 0864 101 03742 3,7 8 x x x x x 0864 101 042 10047 x x x x x x 0864 101 04752 x x x x x 0864 101 05257 x x x x x 0864 101 05762 x x x x x 0864 101 06272* x x x x x 0864 101 072

CartridgesNails Ballistic point

GreenYellowRed

LowMediumHigh

Soft Washer 36mm

Art. No.s mm S mm T mm St.

SL mm A B C D E F G H

32 x x x x x 0864 130 03242

3,7 8 36x x x 0864 130 042

10052 x x x x x 0864 130 05262 x x x x x 0864 130 062

Art. No.s mm S mm T mm St .

SL mm A B C D E F G H

32 x x x x x 0864 160 03242

3,7 8 66x x x 0864 160 042

10052 x x x x x 0864 160 05262 x x x x x 0864 160 062

Formstops

Art. No.S L

dA mm HA mm A B C D E F G H47 x x x x x x 0864 170 04752 48 35 x x x x x x 0864 170 052 10057 x x x x x x 0864 170 057

A Würth DIVA®1B Würth BST 1, BST 2 / Berner BSG 2, 200, 201C Spit P 60, P 200D Hilti DX 351

E Hilti DX 450F Hilti DX A40G Hilti DX A41H Hilti DX 350, DX 36M, DX 460

Soft Washer 66mm

Black Very High 1864 61

x x x x xx x x x xx x x x x

xx

xx x x

Direct Fastening


HSS Twist Drills• DIN 338.• Base material: high grade, high speed steel.• Ø 0.5 to 19.5mm.• Length: 22 to 205mm.• Suitable for wood, plastic/composites, steel,cast steel (alloy & non alloy), grey iron,malleable cast iron, nodular iron, sinteredmaterials and graphite.

Art . P reÞx :0624... Art. PreÞx:

0635...

Art. PreÞx:0626...

Art. PreÞx:0622...

Art. PreÞx:0625...

Art. PreÞx:0629...

Twist Drills HSS• DIN 338.• Base material: high speed steel.• Ø 1.0 to 20 mm.• Length: 34 to 205 mm.• Suitable for wood, plastic/composites, mildand cast steel (alloy & non-alloy), grey castiron, tempered castings, sintered materials,graphite and nodulariron.

Twist Drills HSS•• Long Reach.• DIN 340.• Base material: high speed steel.• Ø 2.5 to 13 mm.• Length: 95 to 205 mm.• Suitable for wood, plastic / composites,mild and cast steel (alloy & non-alloy), greycast iron, tempered castings, sintered mate -rials, graphite and nodular iron.

Twist Stubb Drills HSS•• ShortShort Reach.Reach.• Ø 3.0 to 10.0 mm.• Length: 46 to 89 mm.• Special grinding facility that helps the drillto penetrate.

• No centre punching required.• Right hand cutting.• Suitable for drilling thin metals, rivet holes,etc.

Titanium-Nitride Twist Drills• DIN 338.• Ø 2.0 to 12.0 mm.• Length: 49 to 151 mm.• Titanium-Nitride coating, increasing tool lifeby up to 10 times.

• Point angle: 118°.• Straight cylindrical shank.• Right hand cutting.• Suitable for steel & cast steel (alloy & non-alloy), grey iron, malleable cast iron, nodu-lar iron, sintered powder iron, argentan &graphite.

Cobalt Twist Drill• For Stainless Steel.• DIN 338.• Ø 2.5 to 13.0 mm.• Length: 57 to 151 mm.• Point angle: 130°.• Side chip angle: 35°.• Straight Cylindrical shank.• Reduced shank to 12.7mm (from 13mm dia.)• Right hand cutting.• Use suitable cooling agent: Cutting Oil Art.No: 893.050.004.

• Suitable for stainless steel, (corrosion, acid& heat resistant austenitic steel), titanium &titanium alloy.

• Limited suitability for special alloys, such asHastelloy, Inconel, Nimonic, etc.

Sheet Metal Drill Cone Cutter• HSS or HSSTitanium-nitrideCBN (cubical boronnitride) deepground.

• Length: 61 to 73mm.

• Stepless drilling andopening holes within the Ø range of 5- 30 mm.

• Suitable for thedrilling of thin sheetmetal.

Art . P reÞx :0694....

Stepped Drill• HSS or HSSTitanium-nitride.

• CBN (cubical boronnitride) deepground.

• Drill Ø 4 to 39 mm.• Length: 65 to 109mm.

• centring, spot-drill, opening & de-burring in one go.

• Suitable for thedrilling of thin sheetmetal up to 4 mm.

Art . P reÞx :0694....

Titanium-Nitride HSS• Countersink Ø from 8.3 to 20 mm.• Shank Ø from 6 to 10 mm.• Length: 50 to 63 mm.• Extended tool life by up to four fold.• Greater increase of cutting and feedspeeds.

GreenringHSS• Countersink Ø from 8.3 to 25.5 mm• Shank Ø from 6 to 10 mm.• Length: 50 to 67 mm.• Suitable for alloy and high alloy steel aswell as stainless and acid resistant steel.

Yellow ring HSS• Countersink Ø from 6.3 to 20 mm.• Shank Ø from 5 to 10 mm.• Length: 45 to 63 mm.• Suitable for aluminium, aluminium alloys,thermo-plasts and duroplasts.

Countersink Bits 90°• TypeC(roundshaft)• DIN 335.• Cubical boron nitride (CBM deep ground),HSS.

• Triple cutting edges.• Deburrs and countersinks in one operation.

Blue ring HSS• Countersink Ø from 8.3 to 31 mm.• Shank Ø from 6 to 12 mm.• Length: 50 to 71 mm.• Suitable for normal steel.

Art . P reÞx :0694 017...

Art. PreÞx:0694 018...

Art. PreÞx:0694 019...

Art . P reÞx :0694 020...

Art . P reÞx :0650 6...

Auger Twist Drills• Drilling Ø 6.0 to 26.0 mm.• Length: 235 to 460 mm.• Spiral pulls bit into wood allowing the singlespur to slice ahead of the cutting edge.

• Hexagonal shank.• Suitable for drilling precision holes in hardwood and softwood.

Art. PreÞx:0650 6...

Assortment Art. No.0964 650 64

Speedbor Bit• Sizes 8 to 38 mm.• Length: 157 and 171 mm.• 150 and 300 mm extensions available.• Superior performance to traditional flat bits.

WürthRouterCutter Range• Tungsten carbide tipped.• Steel body.• To be used in portable or stationarymachines, including CNC.• The router bits in the range are designedto cut hardwood and softwood, chipboard,MDF, plywood, composite worktops andother solid surface sheet materials.

0612...


Drilling

9

Dia. Total Working Art . No. Packlength length SDS-max Qty.

mm mm mm340* 200 – 0647 701 234

12 540* 400 – 0647 701 254690* 550 – 0647 701 269

14340* 200 – 0647 701 434540* 400 – 0647 701 454

15- - – –540* 400 – 0647 701 554- - – –340 200 – 0647 701 634

16 - - – –540 400 – 0647 701 654940 800 – 0647 701 694- - – –340 200 – 0647 701 834

18 - - – –540 400 – 0647 701 854940 800 – 0647 701 894- - – –320 200 – 0647 702 032

20 - - – –520 400 – 0647 702 052920 800 – 0647 702 092- - – –320 200 – 0647 702 232

22 - - – –520 400 – 0647 702 252- - – –- - – –

24320 200 – 0647 702 432- - – –520 400 – 0647 702 452

* 2-blade with centring tip, 4-spiralAttention: From working lengt h of 400 mm with shortdrill bit of same diameter , pre-drill at least 150 mm deep !

1

Dia. Total Working Art . No. Packlength length SDS-max Qty.

mm mm mm- - – –320 200 – 0647 702 532

25 - - – –520 400 – 0647 702 552920 800 – 0647 702 592

26 - - – –- - – –370 250 – 0647 702 837

28 - - – –570 450 – 0647 702 857670 550 – 0647 702 867- - – –

30370 250 – 0647 703 037- - – –- - – –- - – –

32 570 450 – 0647 703 257- - – –- - – –

35 570 450 – 0647 703 557670 550 – 0647 703 567

38- - – –570 450 – 0647 703 857- - – –

40 570 450 – 0647 704 057

1

Hammer Drill Bit Quadro-Swith 4 -spiral feed helix

Quadro - S Hammer D rillwith centring tipand 4-spiral feed helixFor use in c oncrete, masonry, natural and artiÞcial stone.

To p qualit y:This test symbol of the Prüfgemeinschaft Mauerbohrer e.V. (PGM - TestAssociation for Stone Masonry Drills) guarantees that our drill bits meetwith the requirements of the „Institut für Bautechnik“ (Institute for BuildingTechnology) for carbide hammer drills used for producing dowel holes.

Redesigned Quadro-S drilling head• Fully imbedded main cutting edgewith centring tip and solid, indepen-dent secondary cutting edges(from 16 mm dia.) of optimised,long-life carbide.

• New carbide plate with wear reserve.• Special soldering and hardeningprocess.

Your advantages:• 4-point guidance.Prevents catching on armouring.

• Extremely smooth-running,considerably less vibrationfor man and machine.

• Precise, on-the-dot tapping andexact drilling hole geometry.

• Reduced friction/feed resistanceExtremely fast drilling progress.

• Considerably increased service life,especially with when hitting armouring.

4-spiral, large-volume, core-reinforced feed helix:• Large core diameter up into the tip.• More helix area for greater transportperformance.

• Narrow spiral back for less friction.

Your advantages:• Considerably increased drilling dusttransport.

• No clogging.• Less wear, longer service life.• Considerably faster drilling progress.• Damped vibrations and directenergy transmission to the tip.

”

Wo rncarbide plate

WearreserveQuadro- S

Wearreservestandard

Wear mark

Wear mark visible = guarantee!

(wood/masonry)• Bore Ø from 4 to 10mm.• Length: 85 to 250mm.• Suitable for ceramics, marble, glass, eternit,floor tiles, bricks, aerated concrete,lightweight building materials and plastics.

Multipurpose HM Drill

0641...

•

Drilling


P/Qty11

P/Qty1

11

P/Qty1

Art . PreÞx :0653 …

Art. PreÞx :0655 …

Machine tap HSS-E

Zebra Blue Ring• For blind holes: 40° right-hand grooved,

short cut 2 - 3 speed, Form,tap relief:ground flanks.

• DIN 371 with reinforced shaft.• Thread depth: approx. 3 x Ø.• Centring: full point on cutting part, shaft

with chamfer centring.

Zebra Green Ring• For stainless steel.• For through holes: straight grooved, 4

speed cut, form B with curling cut, tap relief:outer and flanks ground.

• DIN 371 with reinforced shaft, threaddepth: M4 - M10 approx. 3 - 5 x Ø.

• centring: full point on cutting part, shaftwith chamfer centring.

SDS-Plus Chisels• All chisels in this range will fit all current

machines with longitudinal and circulargrooves and circular only.

• Chisels can be re-sharpened by simplyre -grinding.

• Chisels can be changed instantly, simply bypushing the tool in and releasing it.

Pointed Chisel

Flat Chisel

Bolster

Hollow Chisel

L mm Art . N o.250 0648 925 0

L mm Head W mm Art . N o.250 20 0648 920 250



Drill Ø mm Teeth Art . N o.50 6 0632 150105 6 0632 110 5

Art . N o. Application Ø mm0632 150 Heating pipes with 50

insulation0632 110 5 Air conditioner pipes with 100

insulation

Application Range :

Total LDescription mm Art. No .Hex, A/F 11mm for 78 0630 005drilling machineFor SDS drilling 105 0630 008machine 220 0630 009

Insertio n S haft:

Centre Drill for Masonry:• With sintered hard carbide cutting edge.

Drill bit Ø mm L mm Art. No .9 120 0630 08 120

Hammer Drill Crowns• For precision drills and 4kg hammer drills.• Length: 75 mm.• 6 sintered hard carbide cutting edges

enable fast penetration and guarantee along service life.

• M16 internal thread.• Max. 60 mm drill depth per working stage.• Required machine output:

ï Ø 50 mm min. 600WØ 50 mm min. 800W

• Suitable for concrete, brick work, limitedsuitability for natural stone depending ontheir strength.

• Caution:Caution: only suitable for machines withsafety clutch and additional handle.

ï

Saw Blade Handle• For standard saw

blade, adjustable.

Metal Hacksaw• Complete saw assembly with Zebra Bimetal

blade.• Ergonomic soft grip handle.• Light weight - high strength frame.

Materialthickness mm Teeth Art. No . P/QtyOver 2 mm 24 0603 300 13 10/50Up to 2 mm 32 0603 300 133 10/50

Art. PreÞx . P/Qty0603 301 13 10/50

HSS Bimetal Hacksaw Blades• Flexible blade made of high alloy/ high

speed steel.• The teeth are made of fully hardened steel

and are welded with electron beams in avacuum.

Standard tooth pattern

Progressive Tooth Pattern32/18 tp i

105 2.65 - 5.0 060 8 116 345 1/5Art. No . P/Qty0713 64 04 1

Description Art. No . P/QtyMini hacksaw 0609 1 1

Description Art. No . P/QtyMini hacksaw blade 0609 2 12

Mini Hacksaw Frame• Material: Steel, nickel plated.• Length: 250 mm.

Universal Mini Hacksaw Blade• Specially for metals.• 32 tpi.

Multi Blade Jigsaw Blades• Multi purpose blade suitable for most

common building materials..• Progressive tooth pattern: cuts thick

and thin materials.• Fast cut without splintering the material.• Top quality long life expectancy.

Suitable areas and cut depths intodi!erent materials:Art. No: 0608 116 123Multi Blade Metal:- Metal, sheet metal 2.0 - 10 mm- Non-ferrous metal 2.0 - 20 mm- Stainless steel 1.5 - 3.0 mm- Plastic 1.5 - 30 mm- Fibre glass GRP 1.0 - 2.0 mm

Art. No: 0608 116 234Multi Blade Wood:- For straight, fine, splinter free,precision cut in thin or thick 1.0 - 80 mm

Art. No: 0608 116 345Multi Blade Universal:- Metal, non-ferrous metal,aluminium 3.5 - 10 mm

- Wood with nails, chip-board, glued wood 3.5 - 10 mm

- Plastic 2.0 - 30 mm

Universal90 1.75 - 2.8 060 8 116 234 1/5

Wood

Tooth Lmm Tooth pattern Art. No. P/Qty75 1.0 - 3.0 060 8 116 123 1/5

Metal

Length mm Art. No . Pack/Qty390 0714 64 015 1

Sabre Saw BladeSpecle Demolition

Suitable for metal / woodHigh Quality long Lasting200mm Long

Dimensions mm No. of Teeth Art. No . P/Qty190 x 2.8 x 30 24 0610 190 243 1210 x 2.8 x 30 64 0610 210 600 1

Circular Saw Blades• Universal for mobile

use.• For lengthwise and

cross cuts.• Suitable for use

with circular saw.• Tooth shape:

Alternating tooth(AT).

• Materials: Soft andhard wood, board materials unfinished,plastic coated or veneered.

Machine tap HSS-E

Tooth Lmm Tooth pattern Art. No. P/Qty

Tooth Lmm Tooth pattern Art. No. P/Qty


Drilling and Sawing

11

0608 030 25 1=5

0615 922 814 1=5

0615 922 826 1=5

0615 930 526 1=5

0615 922 818 1=5

0615 915 026 1=5

0615 915 018 1=5

0615 915 014 1=5

0615 915 010 1=5

0615 910 010 1=5

0615 830 040 1=5

0608 030 22 1=5

0608 030 21 1=5

0615 910 014 1=5

Art

icle

.N

o .

Tooths pacingin

mmandinch

Overal lLength

inmma ndinch

Thickn essin

mm

Sabre Saw Blades Sabre Saw Blade ApplicationGuide

P/Qty

Material

Quality

0615 815 030 1=5 3.6-5.1 150 1.255-7 tpi 6”

4.0 305 1.256 tpi 12”

4.0 150 1.256 tpi 6”

5.0 240 1.505 tpi 10”

3.6-5.1 305 1.255-7 tpi 12”1.0 100 0.924 tpi 4”

1.0 150 0.924 tpi 6”

1.4 100 0.918 tpi 4”1.4 150 0.918 tpi 6”

1.8 150 0.914 tpi 6”1.8-2.6 150 0.910-14 tpi6”

1.4 228 0.918 tpi 9”1.8 228 0.914 tpi 9”

1.8-2.6 228 0.910-14 tpi9”

1.8-2.6 305 0.910-14 tpi12”

***

****

O

O

O

O

OO OO O O OO O O 1

1 1

1 1 1 1

111111 1

1 1

1

1 1 1

1 1

1 1 1

X X X X X X X X X X X X X XXX X

X

XX

XXXXXX

XXXX

X

XX X X

1

11

11

11

1 1 111

11 1 1

1 1 1

11 1

OO OO

Hardwood, softwood

Green wood

Wood fibre boards

Plywood

Glued wood

Wood with nails

Wood with metal

Window construction

Thin sheet metal

Thick sheet metal

Sheet metal profiles and pipes

Metal profiles and pipes

Aluminium

Non ferrous metal

Metal pipes

Steel pipes, cast iron pipes

Sandwich material

Pallets

Porous concrete

Drywall

Fibre cement

Bricks

PVC, general synthetics

Straight cut

Curved cut

Plunge cut

Perpendicular cut

Ripe vise

Fine cut

Rough cut

Fast cut

Asbestos cement, fibreglass,-reinforced synthetics

Flexible and break proof forflush cuts

Fibre boards with syntheticcoating

0615

815

030

0608

030

21G

0608

030

022

0608

030

025G

0615

830

040

0615

910

010

0615

910

014

0615

915

010A

061 5

910

014/

015B

0615

915

018

0615

915

026

0615

922

814C

0615

922

818D

0615

922

826E

0615

930

526F

***

Woo

dM

eta

l

** **

Sabr e S aw Blad e TableAbbreviations Guide :1 = Particularly well suitedO = SuitableX = Application

A = Longer version of 0615 910 010B = Longer version of 0615 910 014C = Longer version of 0615 915 014D = Longer version of 0615 915 018E = Longer version of 0615 915 026F = Longer version of 0615 922 826G = With sharpened teeth

WoodMeta l

0615 730 512 1=5

0615 745 512 1=5

12.7 305 1.52 tpi 12”

12.7 455 1.52 tpi

0615

730

512

0615

745

512

NEW!

O OO O

XX

X X

1111

LONGLIFELONGLIFE Cutting disc

• Suitable for cutting work on solid materials,thick walled pipes, profiles, metal sheets,etc.

• 2 designs:1 2

Zebra LONGLIFE Cutting Discs• Synthetic resin-bound, fibre reinforced,high-performance cutting discs.

• For freehand cutting work with electric orcompressed air angle grinders.

• Very low incidence of breakage.• Minimal measurement and imbalance toler-ances.

• Peripheral speed max. 80 m/s.• Discs meet the very high safety requirementsof the European standard En12413 andthe OS A(Organisation for the safety ofAbrasives).

• Very long service lives.• Optimum cutting of solid materials andprofiles.

• Very high lateral stability.

* max. working speed: 100 m/s(for use with petrol and electric cut-off machines)

Ø x Thickness Boremm Ø mm Art. No . P/Qty

115 x 2.5 22.2 0670 101 152 1 25125 x 2.5 22.2 0670 101 252 1 25180 x 2.5 22.2 0670 101 802 2 25230 x 2.5 22.2 0670 102 302 2 25300 x 3.5 * 20.0 0670 103 023 2 10300 x 3.5 22.2 0670 103 003 2 10

LONGLIFELONGLIFE Grinding DiscBlue for steel

• Suitable for grinding of edges, deburring,dressing of weld seams, etc

• Design:


115 x 4.0 22.2 0670 161 154 25115 x 7.0 22.2 0670 161 157 25125 x 4.0 22.2 0670 161 254 25125 x 7.0 22.2 0670 161 257 25180 x 8.0 22.2 0670 161 808 10230 x 8.0 22.2 0670 162 308 10

Zebra LONGLIFE Grinding Discs• Synthetic resin-bound, fibre-reinforced,high-performance grinding discs.

• For freehand grinding with electric or com-pressed air angle grinders.

• Very low incidence of breakage.• Minimal measurement and imbalancetolerances.

• Max. peripheral speed 80 m/s.• Discs meet the high safety requirements ofthe European standard EN12413 and theOS A (Organisation for the safety ofAbrasives).

• An all-round harder disc.• Particularly long service life combined withgood metal-removing properties.


76 x 1.0 10.0 0664 130 761 2 1115 x 0.8 22.2 0664 131 148 1 1/25115 x 1.0 22.2 0664 131 150 2 25115 x 1.6 22.2 0664 131 151 2 25125 x 2.0 22.2 0664 131 250 2 25180 x 2.0 22.2 0664 131 802 2 25230 x 1.9 22.2 0664 132 301 2 25

SPEEDSPEED Plus Cutting DiscGreen for stainless steel

• Suitable for cutting work on pipes, ventila-tion ducts, sheet metal, pipe systems, bars,steel reinforcements, profiles and rails (forbathrooms), cable trays, high-voltagecables, steel rope, composite materials,plastics, etc.

• Free from iron, chlorine and sulphur (0.1%).• MeetsKW U class II (e.g. for pipe systemand reactor engineering).

• 2 designs:1 2

Arbour for 0664 130 761 for u se inDie Grinde rL Shaft Ø For boremm mm Ø mm Art . N o. P/Qty60 6 10 0669 978 1

Blue for steel

Sawing and Abrasives


LONGLIFELONGLIFE Cutting DiscYellow for non-ferrous metal s /aluminium

• Suitable for cutting work on cast-irons, solidmaterials, pipes, profiles, metal sheets, etc.

• Design:

* max. working speed: 100 m/s(for use with petrol and electric cut-off machines)

Ø x Thickness Boremm Ø mm Art . N o. P/Qty

115 x 2.5 22.2 0670 151 152 1 25125 x 2.5 22.2 0670 151 252 1 25180 x 2.5 22.2 0670 151 803 2 25230 x 2.5 22.2 0670 152 303 2 10

300 x 3.5 * 20.0 0670 153 023 2 10


115 x 2.5 22.2 0670 121 152 25

LONGLIFELONGLIFE Cutting DiscGrey for stone• Suitable for cutting work on stone, board,

prefabricated components, bricks, tiles, claypipes, roof tiles, clinker etc.

• 2 Designs:1 2

LONGLIFELONGLIFELONGLIFELONGLIFE Grinding DiscGreen for stainless steel

• Suitable for grinding of edges, deburring,dressing of weld seams, etc.

• Iron - Chlorine - and sulphur - free (0.1%).• Meets KWU class II (e.g.for pipe system

and reactor engineering).• Design:


115 x 7.0 22.2 0670 171 157 25


115 x 7.0 22.2 0670 181 157 25125 x 7.0 22.2 0670 181 257 25


115 x 1.6 22.2 0664 101 151 25230 x 2.0 22.2 0664 102 302 25

LONGLIFELONGLIFE Grinding DiscYellow for non-ferrous metals /aluminium

• Suitable for the grinding of cast-ons, castingskin and edges and preparing weld seamsetc.

• Design:

SPEEDSPEED Cutting DiscBlue for steel• Suitable for cutting work on metal sheets,

pipes, profiles, steel rope, reinforcing steel,etc.

• Design:

SPEED Cutting Discs• Extremely high cutting capacity (very short

cut-off times); very long service life.• Extremely thin for precise, virtually burr-and

chatter free cutting (very clean and cool cut-ting surfaces).

• Work requires minimal effort and helps toprotect the user and the machine.

• Minimal build-up of cutting waste and cut-off dust.

• Low noise output and high break-resistance.• Specially designed for thin-walled pipes

and profiles, thin metal sheets, car bodysheets, etc.

Dimensions mm Grain Art. No . P/Qty115 x 22.2 80 0579 511 580 10125 x 22.2 60 0579 312 560 10125 x 22.2 80 0579 312 580 10

• With aluminiumoxide.

• Many times longerservice life com-pared to fibregrinding discs.

• Excellent grindingproperties untilcompletely used up.

• Self sharpening ofthe lamella - therefore no clogging.

• Even finish without scores and scratches.• Low level noise.• Application without additional backing disc.• Suitable for de-burring, smoothing, removal

of rust from steel, stainless steel. cast iron,alum, hard plastics, wood, stone. For work-ing of welds, grinding of paint, lacquer andfiller.

Description Colour Art . N o. P/QtyCoarse beige 0585 311 510 1/10Medium red 0585 311 518 1/10

Fine blue 0585 311 524 1/10

Polishing Flap Discs• Highly effective grinding Fleece in fan

shaped flap disc.• Suitable for descaling and derusting of

workpieces, preparing, repolishing andsmoothing of weld seams, preparation ofpainted surfaces, polishing of stainless steel,cleaning of surfaces of various materials.

• Ø 115 mm,bore 22.2 mm.

Lamella Fan TypeGrinding Discs• With zirconium corundum.• Excellent grinding properties until complete-

ly used up.• Self-sharpening of the lamella, therefore, no

clogging.• Even finish without scores and scratches.• Low noise level.• Application without additional backing disc.• Suitable for de-burring, smoothing, remova l

of rust from steel, stainless steel, cast iron,alum, hard plastics, wood , stone. For work-ing of welds, grinding of paint, lacquer andfiller.

• 2 Designs:1 2

Dimensions mm Grain Art. No . P/Qty100 x 16 36 0578 100 536 1 10100 x 16 60 0578 100 560 1 10100 x 16 80 0578 100 580 1 10115 x 22 40 0579 430 514 2 10115 x 22 60 0579 430 516 1 10115 x 22 80 0579 430 518 1 10125 x 22 36 0579 430 324 1 10125 x 22 60 0579 430 326 1 10

With Þbre backin g disc• Backing disc made of several layers of

fibreglass.

Dimensions mm Grain Art. No . P/Qty115 x 22.2 40 1578 511 540 25115 x 22.2 60 1578 511 560 25115 x 22.2 80 25

Eco Flap Disc• Zirconia corundum.• Long service life.• Max. speed 80 m/s.• Design:

Dimensions mm Grain Art. No . P/Qty115 x 22.2 40 0579 430 314 10115 x 22.2 60 0579 430 316 10

• With zirconium corundum.• Slim arched plastic cup.• Plastic cup made of fibreglass reinforced

polyamide to give no smearing.• Special zircon-corundum with cooling coat-

ing, grinding additives and multi-binding ofthe grinding fabric.

• Resistant to heat and cold (-40ºC to +180ºC)thus no deformation or cracks occur duringthe grinding process.

• Extremely high service life and grinding per-formance.

• Design:

1578 511 580

Lamella Fan TypeGrinding Discs

Lamella Fan TypeGrinding Discs


Abrasives

13

Dimensions mm Art . N o. P/Qty115 x 2.0 x 22.2 1668 115 227 1230 x 2.4 x 22.2 1668 230 227 1300 x 2.8 x 20.0 1668 300 227 1350 x 3.2 x 25.4 1668 350 257 1

General Purpose• C olour code: pink .• Ideal for the majority of common buildingmaterials.

• Thin segments give a clean cut.• Long lasting for maximum price/performance ratio.

• Dry cutting only.

Ø x Thickness Boremm Ø mm Art . N o. P/Qty230 x 22.2 1668 999 230 1300 x 20.0 1668 999 300 1

General Building Materials• Multi use blade for most building materials.

Dimensions mm Art . N o. P/Qty230 x 2.8 x 22.2 1668 230 226 1300 x 2..8 x 20.0 1668 300 206 1350 x 3.2 x 24.4 1668 350 256 1

Hard Concrete /Stone• C olour code: magenta .• Specially suitable for very hard materials,i.e. flint aggregate concrete.

• Ideal for engineering blocks.• Wet or dry cutting.


115 x 6.0 22.2 1668 461 115 1

Mortar Raking Blade• 6 mm wide for raking out old mortar jointsprior to repointing, inserting lead flashingetc.

• Suitable for use on cement based jointsonly.

• Usage on other materials will shorten bladelife.

Floor Saw Diamonds

ZEBRA BSL Technology115mm,125mm,230mm

300mm & 350mm

Dry Diamond Core Drills• Suitable for lightweight building products:facing bricks, soft stone, breeze blocks,insulation blocks and concrete blocks*.* Not suitable for reinforced or non-rein-forced concrete.

• Used by plumbers, electricians, heating andventilation engineers and general builders.

• Drills clean holes with no breakout.• Quicker, cleaner and more efficient thanhammer crowns.

• Suitable for SDS or standard chucks.• Use only on rotary action.• Dry use only.• Segment depth: 6 mm.• Requires a 13 mm pre-drilled hole.

Abrasive Paper for Wood• Suitable for hard and soft woods, MDF,chipboard, veneers, etc.

• Can be used by hand or with machines.• Open coated.• Aggressive initial and long term sanding.• Backing paper weight; hook and loop prod-ucts, D weight. All other products, 40G to150G-E weight, 180G to 320G-D-E weight.

• Bonding system; hook and loop products,synthetic resin, other products, flexible syn-thetic resin.

• Grit; aluminium oxide.

Abrasive Paperfor Hardwoods• An extra heavy duty paper backed abrasivedesigned to remove maximum material withminimal wear rates. The resin/resin bondedaluminium oxide abrasive produces a stiff,yet flexible product suitable for machine orhand use.

• Suitable for all hardwoods.• “F” (270G/M2) weight backing paper alsosuitable for machine use.

• Electro coated, resin/resin bonded alumini-um oxide grit.

• Close coated abrasive for maximum materi-al removal.

• Dimensions: Width: 115 mm, Length: 50 m.

Aluminium OxideVelcro Strips• Suitable for use on: paints, hardwoods,softwoods, particle boards etc.

• Flexible backing paper.• Electro coated and resin bonded with alu-minium oxide grit.

• Heavy duty dry finishing paper available incoarse grits for high removal rates.

• Stearite coating resist clogging, to improveabrasive life and surface finish.

• Dimensions: Width: 70, Length: 125 mm.

and Wet Coring range

Abrasives


Art. PreÞx:0158 2...

Art. PreÞx:0184 108...

ASSY ECOF AST II• Self Countersinking.• Yellow chromate. Plastic coated.

• Asymmetrical course thread.

• Length: 180 - 220 mm.

ASSY Kombi II

• Zinc Plated. Plastic coated.• Asymmetrical course thread.

• Length: 160 - 400 mm.

Finish Art. PreÞx:Zinc Plated,Yellow ChromateStainless Steel 0166...

ASSY PlusSelf Countersinking head with drill tip.Self Countersinking head with drill tip.• AW drive, Ø 4 to 5 mm.• Length: 30 to 70 mm.• Suitable for: all types of hard and softwoods, MDF, laminated & waterproof chip-boards, plywood & other wood basedmaterials.

• Ideal for corner joints.• Ideal for screwing “end grain”, even inMDF.

• Special asymmetrical thread design forfaster screw insertion.

• No pre-drilling required.

0165...

FinishYellow Chromate

FinishYellow Chromate

• AW40 drive.

• Shank cutter.• Ø M8 and M10.

• Hexagonal Head• AW 40 drive.

• Shank cutter.• Ø M8 and M10.

Dry Wall/ConstructionScrews

Finish Art . P reÞx :Surface hardened &Phosphated 0189 35...

Finish Art. PreÞx:Surface hardened &Phosphated 0189 39...

Finish Art. PreÞx:Surface hardened &Phosphated 0189 039...

• Trumpet HeadDeepThread• Phillips drive head No.2, Ø 3.9 mm.• Length: 25 to 90 mm.

• Trumpet HeadTwinThread• Phillips drive head No.2, Ø 3.9, 4 & 5 mm.• Length: 19 to 90 mm.

Finish Art . P reÞx :Yellow Chromate 0175...

Finish Art. PreÞx:Solid brass 0142...

Back Panel Screws• Flanged raised countersunk head.• Pozi drive No.2, Ø 3 to 4 mm.• Length: 20 to 45 mm.• Suitable for attaching wooden handles /knobs, wardrobe back panels, etc.

Brass Slotted Wood Screw• Slotted Countersinking Head• DIN 97.• Ø 3 to 6 mm.• Length: 16 to 70 mm.• Superior thread design.

Finish Art . P reÞx :Yellow Chromate,BurnishedZinc Plated 0199...

Piano Hinge Screw• Special “reduced” countersunk head,Ø 5 mm.

• Pozi drive No.1, Ø 3 mm.• Length: 12 to 25 mm.

• Especially suited for small, thin flush hinges

0187...

Wüpo PanHead Pozi• Hardened steel.• Pozi drive head, Ø 3 to 6 mm.• Length: 10 to 100 mm.• Available with shank.• Suitable for: all types of wood, MDF, lami-nated & waterproof chipboards, woodbased materials.

• 25° point for accurate placing on hard sur-faces.

• Plastic anti-friction coated.• Sharp angled thread turns, create easydrive in.

Finish Art. PreÞx :BZP 0196...Stainless Steel 0182 1...

Wüpo Countersunk Pozi• Hardened steel.• Pozi drive head, Ø 2.4 to 6 mm.• Length: 12 to 200 mm.• Available with shank.• Suitable for: all types of wood, MDF, lami -nated & waterproof chipboards, woodbased materials.

• 25° point for accurate placing on hard sur -faces.

• Plastic anti-friction coated.• Sharp angled thread turns, create easydrive in.

BZP 0198...Stainless Steel 0182...

Burnished 0183...

Yellow Chromate 0186...

per 1000

ASSY SK• Washer Head.• AW 40 drive.• Yellow chromated. Plastic coated.• Asymmetrical course thread.• Shank cutter.• Ø M8 and M10.• Length: 160 - 400 mm.

Finish Art. PreÞx:Yellow Chromate 0184 60...

Finish Art. PreÞx:Stainless Steel A2 0166 105...

ASSYPlus RSDecking Screw A2• Self Countersinking.• Reduced countersunk head Ø: 7.5 mm.• Thread Ø 5 mm.• Length: 50 - 80 mm.• AW 20 drive.• Material: Stainless steel A2.• Asymmetrical course thread.• Serrated shank grips decking / floor boardeliminating squeaking.

• Self drilling tip (no pre-drilling required).

Finish Art . P reÞx :Zinc Plated 0151...Yellow Chromate 0152...

ASSY• AW drive.Ø 3 to 6 mm.• Length: 20 to 120 mm.• Suitable for: All types of hard & softwoods,MDF, laminated & waterproof chipboards,plywood & other wood based materials.

• Special asymmetrical thread design forfaster screw insertion.

• Up to 40% higher fracture torque. 50% timesaving over conventional screw types.

• Plastic anti-friction coated.

Art. PreÞx:Surface hardened & 0189 14...

Self Countersinking Head.• Phillips drive head No.2, Ø 4.0 mm.• Length: 20 to 45 mm.

Finish

Phosphated

•

Art. PreÞx:Black Phosphate 0189 1...Finish

Art. PreÞx:Black Phosphate 0179...

Collated Dry Wall Screws

Finish


Wood Screws, DryWall Screws, Pins and Caps

15

HexagonalHead Self Tapper• DIN 7976, ISO 1479.• Thread Ø: 6.3 mm.• Length: 16 to 32 mm.

Phillips Pan Head Self Tapper• DIN 7981, ISO 7049.• Thread Ø: 2.9 to 6.3 mm.• Length: 9.5 to 80 mm.

Description Art . P reÞx :Steel Zinc Plated 0114 63...

Description Art. PreÞx :Steel Zinc Plated 0115 …A2 Stainless Steel

Contents Art . N o.16 sizes from 3.5 x 9.5to 4.8 x 25 mm = 1600 pieces.

Description Art. PreÞx :Steel Zinc Plated 0115 …

Description Art. PreÞx:Steel Zinc Plated 0115 …

Description Art. PreÞx :Steel Zinc Plated 0211…A2 Stainless Steel 0211 1…

Description Art. PreÞx :Steel Zinc Plated 0212...A2 Stainless Steel 0212 1...

Description Art. PreÞx:Steel Zinc Plated 0116 …

Description Art. PreÞx :Steel Zinc Plated 0116...A2 Stainless Steel 0123...

Art . N o.0964 116

Phillips Flat CountersunkHead Self Tapper• DIN 7982, ISO 7050.• Thread Ø: 2.9 to 6.3 mm.• Length: 9.5 to 80 mm.

Assortment:Assortments:

Zinc Plated, passivated pan


A2 Stainless Steel

Zinc Plated, DIN 7981/7983, pan head andRSD countersunk head

Pozi Pan Head Self Tapper• DIN 7981, ISO 7049.• Thread Ø: 4.2 or 5.5 mm.• Length: 19 to 45 mm.

• DIN 7982.• Zinc plated, passi-vated.

• Contents: 16 sizesfrom 3.5 x 13 to 4.8x 50 mm = 1500pieces.

• In compartmentassortment box.

• DIN 7982.• In compartmentassortment box.

0964 115

• DIN 7982, ISO 7050.• Thread Ø: 4.2 or 4.8 mm.• Length: 19 to 50 mm.

Zebra piasPhillips Pan HeadSelf Drilling and Tapping• DIN 7504-N.• Thread Ø: 3.5 to 4.2 mm.• Length: 9.5 to 38 mm.

Phillips Flat Countersunk

• Similar to DIN 7504-P.• Thread Ø: 3.5 to 4.8 mm.• Length: 13 to 60 mm.


Pozi Flange Head Self Tapper• Thread Ø: 2.9 to 4 mm.• Length: 9.5 to 40 mm.

Description Art . P reÞx :Steel Zinc Plated 1214 163

Description Art. PreÞx:Stainless Steel /Hardened SteelDescription Art. PreÞx:

Steel Zinc Plated 1214 705

Description Art. PreÞx:Steel Zinc Plated 0214...

Zebra piasHexagonal HeadSelf Drillingand Tapping• Similar to DIN 7504-K.• Thread Ø: 4.2 to 6.3 mm.• Length: 13 to 80 mm.

Cladding/Facade ScrewsGash Point• Complete with bonded rubber washer.• Hexagonal head Ø: 8 mm.• Suitable for fastening into timber.• Ø: 6.3 x 32 mm.

Self Drilling Tip• Complete with bonded rubber washer.• Hexagonal head Ø: 8 mm.• Suitable for fastening into steel / sheetmetal.

• Available in two sizes: Ø 5.5 x 20 or 36 mm.

Zebra Wing piasRaised Self Countersunk Head• Similar to DIN 7504-Q.• Thread Ø: 5.5 mm.• Length: 50 mm.

Zebra Wing piasta

• Similar to DIN 7504-N.• Stainless steel with hardened steel drill tip.• Finish: Ruspert coated for added resistanceto corrosion and as a lubricant for the thread.

• Thread Ø: 5.5 mm.• Length: 90 mm.

Description Art. PreÞx:Steel Yellow Chromate

Description Art. PreÞx:Steel Zinc Plated 0218 4/5…Black Zinc Plated 0218 24/25…

Zebra Wing piasFlat Self Countersunk Head• Similar to DIN 7504-N.• Thread Ø: 3.9 to 6.3 mm.• Length: 25 to 65 mm.

Description Art. PreÞx:Steel Yellow Chromate 0215...

0215 855 590

Description Art . P reÞx :Stainless Steel /Hardened Steel 0211 8

Zebra piastaPan Head• Similar to DIN 7504-N.• Stainless steel with hardened steel drill tip.• Finish: Ruspert coated for added resistanceto corrosion and as a lubricant for the thread.

Zebra piasFlange Head• Suitable for assembly of plastic or thin sheetmetals onto a metal substructure.

• Thread Ø: 4 to 4.8 mm.• Length: 13 to 80 mm.

Multi Grip Rivets• Huge range of Rivets for all applications

Pozi Flat CountersunkHead Self Tapper

Flat Self Countersunk Head

Zebra pias

Self Drilling and Tapping

0119 …

0964 119

0964 115 117

0215 055 50

Self Tappers, Wing Pias and Rivets


Contents Art. No . P/Qty150 ml 0890 304 1/6

BHF-Barrier Hand Foam• Protects against dirt, grease, soot, adhe-sives and paints, etc.

• Offers protection from allergies andinfections.

• Absorbs into skin creating a waterproofprotective barrier. Regular application pre-vents skin drying out.

• Full hand protection for up to 4 hours, evenwhen washed with soap and water.

• Non greasy.• Approx. 150 applications per can.• Not harmful to the environment, nor whenin contact with eyes, mouth or food.

Contents Art. No . P/Qty1000 ml 0890 600 100 1

Contents Art. No . P/Qty72 wipes 1890 900 72 1

Skin Protection CreamBarrier Cream

• Protects skin during the useof oil, grease, graphite,bituminous products, paint,varnish, adhesives, resin,polyester, silicon, dust andfibreglass.

• Produces a non-greasy pro-tective film.

Cleaning Wipes• Removes oils, grease, lubri-cants, paint, ink, sealants(acrylic and uncured sili-cone) from hands, surfaces,tools and uPVC.Note : Any residues left onglass or reflective surfacesshould be removed usingalcohol.

Hand Cleaner• Cleans and protects at thesame time.

• Alcohol free.• Free from silicone oil.• PH neutral.• Tested dermatologically.• Biologically degradable.

Description Contents Art. No . P./QtyContainer 4000 ml 0893 900 0 1/6Tube 350 ml 0893 900 01 1/6

Dispenser Systemwith Wall Bracket

For Han d C leanerArt . No: 0893 900 0• Handy dosing pumpfor 4000 mlcontainer.

• Exact dosage byone pump (3 c m3 ).

• Complete with wall mounting screws andwall plugs.

• Total height: 40 cm.Art. No . P/Qty0891 901 1

Super Clean• Hand cleansing gelwith polybeadsremoves deeplyingrained dirt andgrime.

• Mixture of naturaland synthetic deter-gents emulsify dirtand grease allow-

ing hands to be rinsed clean quickly.• Contains dermatin to restore the naturalacid balance of the skin.

• Mild alkali with pH value approx. 8.Awarded the Royal Institute ofPublic Health andHygiene Certificate(London,England).

Contents Art. No . P/Qty10 litres 0893 900 10 1/2

Würth Respirator Selection ChartHazard FFP 1 FFP 2 FFP 3 FFP2v We lding 1/2 Mask 28 Day Mask

Up to Up to Up to Up to 10 x safe4 x safe 4 x safe 4 x safe for particulate and 20 x 20 xlevels of levels of levels of nuisance levels of safe levels safe levelsparticulate particulate particulate ozone gas of particulate of particulate

Brick dust Yes Yes Yes Yes P3 YesConcrete Yes Yes Yes Yes P3 YesFerrous Metal Fumes No Yes Yes Yes A1P3 NoFibre Glass No Yes Yes Yes P3 YesLead Fume No No Yes No P3 YesMDF Board No Yes Yes Yes P3 YesMineral Fibres No No Yes No P3 YesPaint Fume (non isocynate) No No No Yes A1P3 NoPlaster Yes Yes Yes Yes P3 YesRockwool No Yes Yes Yes P3 YesSandstone Yes Yes Yes Yes P3 YesSilica No No Yes No P3 YesWelding No Yes Yes Yes P3 YesWelding (ozone gas) No No No Yes A1P3 NoWhite Spirit No No No Yes A1P3 NoWood (soft) Yes Yes Yes Yes P3 Yes

The above is a guide only and should not be used as the only means of selecting a respirator.

Wood (hard) No Yes Yes Yes P3 Yes

Latex Gloves

Size Art . N o. P/QtyM 0899 001 1L 0899 002 (=100)

Vinyl Gloves

Size Art . N o. P/QtyL 0899 003 1 (=100)

Latex Gloves Powdered

Size Art . N o. P/QtyL 0899 012 1 (=100)

Description Art. No . P/QtyWhite single ply,21.7cm x 320mPaper dispenser for899.800.65335.5 x 29 x 31cm

1899 800 653

1899 800 421 1

6

Single Ply Small Rolland Dispenser

Cleaning Paper Rolls• Very absorbent.• Fits all commonreel systems.• Different ply andpaper lengths/widths.

FullRan

ge


Personal Protective Equipment

17

Nitrile Touch Glove

Size Art. No. Pack Qty9 1899 401 9

1/1210 1899 401 1

Scaffolders Non-Slip Glove

Size Art. No. Pack Qty9/M 1899 400 2

1 Pair10/L 1899 401 311/XL 1899 401 4

TarpaulinsBlue:• Waterproof.Manufacturedfrom wovenpolyethylene,which is thenlaminated.

• Each tarpaulin has reinforced hems andeyelets at approx. 1 metre intervals.

Green(Heavyduty):• For more rugged use, with wovensquare reinforcing.

• UV Protected, rot proof and flexible

Size cm Art. No . P/Qty30 1899 299 30 100

Shock Cord Tie• Elasticated shock cords for use with scaf-tarpaulins.approx. 100 shock ties.

Colour Size m Art. No . P/Qty

Blue 3.5 x 5.4 1899 299 002 1/105.4 x 7.0 1899 299 003 1/3

Green 4.0 x 5.0 1899 299 004 1/34.0 x 10.0 1899 299 005 1/2

Art. No . P/Qty0899 107 51 1

Ligh t enhancing glasses with orange frame &lens

Art. No . P/Qty0899 107 52 1

Constant light level glasses with blue frame &gold mirror lens

Art. No . P/Qty0899 107 53 1

As above, with blue frame & clear lens

Safety GlassesHi-T ech Frame Design. EN 166F• Ultra-light design from highly flexible plas-tics - unbreakable, tough and sleek.

• Lens quality 1.• Polycarbonate.• Anti scratch coating.• Adjustable side length and pantoscopicangle tilt for comfortable fit.

Art. No . P/Qty1899 107 54 1

Blue frame with silver mirror lens

High Visibility Polo Shirtand T-shirtEN471 (Class 2)

High Visibility VestEN471 (Class 2)

Size Colour Art. No . P/QtyXL Yellow 1899 200 70XL Orange 1899 300 70

1/10

Ear Plugs• Ergonomic, cone-shaped disposable earplugs for use in extremely noisy environments.

• Very good insulation.• Excellent speech clarity.• Very comfortable to wear.X depression offers a host of advantages:• Reduces the contact pressure at the earcanal opening.

• Soft, optimum adaptation to the ear canal• Quick and easy proper insertion.• Easy removal of the plug.

Art. No . P/Qty0899 300 330 600899 300 331 200

Colour Art. No . P/QtyWhite 1899 200 41Yellow 1899 200 40 1/20Red 1899 200 42

Hard HatsEN 397• Shell made from impact-resistantpolyethylene.

• Heat resistant to 50°C.• Size 520 - 600 mm.

SNR valve L value M value H value25 db 17 db 22 db 30 db

Art. No . P/Qty0899 300 220 1

HeadsetEN 352

FullRan

ge

FullRan

ge

Standard Rigger Gloves

Red PVC Gloves

Top Quality Leather

Thermal ScaffoldersNon-Slip Glove

Quality Würth Rigger

FullRan

ge

FullRan

ge

FullRan

ge

FullRan

ge

FullRan

ge

Personal Protective Equipment


• Permanent magnet holds bit.

• With quick release locking sleeve, holds bitssecurely.

• Retaining ring holds bit in place.

• Retaining ring holds bit in place.

Bit HoldersFor 10 or 13 mm ChucksPermanent Magnet & Retaining Ring

Drive inch L mm Bit size Art. No . P/Qty1/4” 74 1/4” 0614 176 702 1




L mm Magnetic pull Art. No . P/Qty60 565 grms 0614 811 360 1

Drive inch Hexagonal nut Art. No . P/Qty5.5 mm 0614 176 7121/4” 0614 176 7137 mm 0614 176 7148 mm 0614 176 715 1

1/4” 3/8” 0614 176 71610 mm 0614 176 71713 mm 0614 176 718

Big Magnetic Bit Holder• Adjustable collar with powerful ring magnet grips, screws securely.

Bit HolderFor Hex Head Screw swith P ermanen t Magne t• Suitable for use on hex head screws.• ¼” drive fits all standard chucks.• 50 mm in length.

Bit HolderFor Hammer Drills• Fits directly onto the end of any SDS orImpact drill bits.

• Accepts¼” screwdriver bits.• Will fit any length drill bits.Caution: to be used only with impact /

hammer action switched off.

Bits25 mm

50 mm

Description L mm Art. No . P/Qty1/4” H1 (PH) 25 0614 176 2741/4” H2 (PH) 25 0614 176 4611/4” Z1 (PZ) 25 0614 176 6511/4” Z2 (PZ) 25 0614 176 652

10

Description L mm Art. No . P/Qty1/4” H1 (PH) 50 0614 176 7351/4” H2 (PH) 50 0614 176 7361/4” Z1 (PZ) 50 0614 176 6591/4” Z2 (PZ) 50 0614 176 660

5

1/10

Assy Bits• For the Würth Assy drive screws.25 mm

Description L mm Art. No . P/QtyAW 10 25 0614 511 0AW 20 25 0614 512 0AW 25 25 0614 512 5AW 30 25 0614 513 0AW 40 25 0614 514 0

Off Line Driver

• Universal joint gives approx. 20°of swivel.• Rotating Sleeve.• 1/4” fitting.

Length Art. No . P/Qty100 mm 0614 176 709 1

Ball Head Hexagon Screwdriver• Shaft: Hexagon, nicromatt steel.• Shape of blade similar to DIN 911, Blackpoint.

• With roll off protection.

Bit-Box• Sturdy metal box.• Colour coded for instant recognition.• Contains 36 Bits 1/4”- (25 mm long).

Bits Contents Art. No .PH H1 x 12, H2 x 18, H3 x 6 0614 250 1PZ Z1 x 12, Z2 x 18, Z3 x 6 0614 250 2PH H1 x 6, H2 x 6, H3 x 6PZ Z1 x 6, Z2 x 6, Z3 x 6

0614 250 5

Tip mm Art. No . P/Qty0.6 x 3.5 0613 421 0350.8 x 4.0 0613 421 0041.0 x 5.5 0613 421 0551.2 x 6.5 0613 421 065 11.6 x 8.0 0613 421 081.6 x 10.0 0613 421 102.0 x 12.0 0613 421 12

Screwdriver - Slotted• With end-to-end hexagon blade.• Shaft: Hexagon, nicromatt.• Shape of blade acc. to: DIN 5265-A,ISO 2380, Black point.

Screwdriver - Cross Recess (H)• With end-to-end hexagon blade/sleeve.• Shaft: Hexagon, nicromatt.• Shape of blade acc. to: DIN 5260-PH,ISO 8764-PH, Black point.

Tip Art. No . P/QtyH1 0613 422 1H2 0613 422 2H3 0613 422 3H4 0613 422 4

1

Pozidrive• With end-to-end hexagon blade/sleeve.• Shaft: Hexagon, nicromatt.• Shape of blade acc. to: ISO 8764-PZ,Black point.

Tip Art. No . P/QtyZ1 0613 423 1Z2 0613 423 2Z3 0613 423 3Z4 0613 423 4

1

Screwdriver - Short DesignPhillips (H)• Blade: round, Nicromatt steel.• Shape of blade acc to: DIN 5260-PH, ISO8764-PH, Black point.

• Conforms to: DIN 5262, SMS SS 2831.

Description L mm Art. No . P/QtyAW20 50 0614 522 0AW25 50 0614 522 5

1/5

Gun Magazine Screwdriver• Grip: 2-component straight handle or withadjustable “gun” grip.

• Ratchet mechanism: 45 teeth.• Shape of blade acc. to: DIN 3126-D 6.3

Contents Art. No . P/Qtywith ratchet and 7 bits 0613 630 2 1

NEW!

AW BITS

Tip mm Art. No . P/Qty4.0 0613 415 045.0 0613 415 05 16.0 0613 415 06

PH H1 x 6, H2 x 12, H3 x 30.5/3.0 x 2, 0.6/4.5 x 2,0.8/5.5 x 2, 1.0/6.0 x 2,1.2/6.5 x 2, 1.2/8.0 x 2

0614 250 6

Pozi, Phillips, TX and Flat Bits assortments also available.

Tip Art. No . P/QtyH1 0613 252 1H2 0613 252 2 1

Screwdriver - Cross Recess (Z)

Contents Art . N o P/Qty1 x blue,1 x red,1 x green 0614 100 1

Bit L Ø Drillsize mm mm Colour size mm Art. No . P/Qty

Green 6 0614 100 6Yellow 6.5 0614 100 65

78 16.5 Red 8 0614 100 878 18 Blue 10 0614 100 10

Individua l B it Holders:

Assortment:

174 14

¼”


Tools

19

Pelican Shears

Description L mm Art. No . P/QtyRight hand 300 0714 03 13 1

Combination Shears• For thin sheet metal.• For left and right handed use.

Telephoneand Cable Scissors• Fully nickel plated toothed blades.

L mm Art. No . P/Qty125 0714 03 16 1

L mm Art. No . P/Qty190 0714 03 14 1

Upholsterers Shears• Polished blades.

L mm Art. No . P/Qty250 0714 03 17 1

Knife Type L mm Art. No . P/QtyRetractable

bladeReplacement Blades:

Trapeziumshaped bladeHooked blade 50 0715 66 03

Carpet Knives

- 0715 66 01 1

60 0715 66 025

Gasket Shears• For cutting rubber gaskets used in uPVC

windows.• Hardened steel cutting blades.• PVC covered handles for non-slip grip.• Suitable for 90° and 45° cuts.• Max. gasket size that can be cut:

Height: 25 mm, Width: 40 mm.• Anvil cutting action ensures clean cuts.• Blades can be locked shut.

L mm Art. No . P/Qty255 0714 03 50 1

Spare Blades & Anvil 0714 03 501 1

Knife Type L mm Art. No . P/QtyRetractable


Break off blade 100 0715 66 07 10

150 0715 66 06 1

Knives

Art. No . P/Qty1715 452 9 1

Moon Knife• 10 cm long blade.• Top quality steel blade for extended serv-

ice life.• Use to remove weld material from uPVC

joints during manufacture.

Weight g Art . N o. P/Qty210 0715 58 01 1


One-handed Vacuum Lifter• For lighter objects with smooth surfaces.• Carrying force vertical: 30 kg.• Ø of suction head approx. 120 mm.

2-ArmVacuum Lifter• For medium to heavy objects with smooth

surfaces.• Carrying force vertical: 80 kg.• Ø of suction head approx. 120 mm.

Belt Belt Max. Nom.L W load* tensilem mm kg st. kg Art . N o P/Qty2 0713 92 204 0713 92 10 18 50 1000 2000 0713 92 11

* according to VDI 2701

Ratchet Lashing Belt• One part.• Made of Polyester acc.to VDI 2701.

25 350 700

Description Art . N o. P/Qty

0715 66 100 1 = 5

Art . N o. P/Qty1715 453 0 1

Knife Type L mm Art . N o. P/QtyExchangeable


Trapeziumshaped blade

170 0715 66 08 1

60 0715 66 02 5

Glass Scraper

Heavy Duty

Sprue Guide• Often used in conjunction with the moon

knife to obtain an even height on theupstand of knifed welds on uPVC joints.

Knife Blades• Heavy Duty 1992


3-ArmVacuum Lifter• For large, heavy

objects with smoothsurfaces.

• Carrying force verti-cal: 120 kg.

• Ø of suction headapprox. 120 mm.

Art . N o. P/Qty1715 99 1

Trimming Knives• Supplied with 5 blades.• Made by Stanley.

Scraper

• Impact resistant handle.• Blade - single sided razor type, ultra thin.• Comes with plastic blade cover.

Type Art . N o. Pack QtyScraper 0714 663 31 1Blades 0714 663 312 1 = 100

NEW!

Tools


20

Does yourworkshop looklike this?Are there threeormore of you inthe workshop.Do you spend£1000 ormoreonWürthProducts.Do you spend alot of your timelooking for items.Would you like toknow how youcould save timeandmoney.

21

Terms and Conditions1. The ORSY System is for the sole storageof Würth products only.

2. The ORSY System shall remain at alltimes the property of Würth UK Limited.

3. Should trading cease for a periodexceeding 6 months Würth UK Limitedreserves the right to remove any articlesplaced at the above customer, as part ofthis Agreement.

4. The customer is responsible for thesafety and security of the ORSY Systemand its components, whilst it remains onhis/her premises.

5. The customer shall allow a Würthrepresentative access to the ORSYSystem at any time to maintain andensure that the ORSY System is beingused in accordance with Conditions 1, 2,3 and 4. Failure to do so may result in theremoval of any articles supplied as partof this Agreement.

Would you likeyour workshopto look like this.Its easy, justspeak to yourWürthconsultant, whowill be able tohelp you choosethe correctORSY RACKINGto suit yourneeds.

Its thateasy.

22

The tailor made Stock Management System

ORSY 1Supplied free on loan.Delivery £50 + VAT Carriage Charge

InstallationCarried out free of charge.

MaintenanceCarried out free of charge.

ORSY 10Reel SystemsEasy access to products on the roll.

LockableDrawersOffer lots ofspace for smallparts and tools.

5 litreTiltingUnitFor easy refills.

WallMountingUnitsNo wasted wall space.

Dispenser Cartonsfor hardware and electrical componentsAngled shelf and integrated window providesvisability of contents.

Modular Shelvesmix and match adaptabilityAssembled to meet your stock.

23

Product andracking are bothpart numberedensuring easyproduct retrieval.Completemerchandisingserviceeliminatesthe need tomaintain, orderand rotate stock,saving both timeandmoney.

Stock Management Systemin the workplace

©Würth UK Ltd. All rights reserved in all media

No part of this catalogue may be reproduced in any form,copied or stored electronically, whole or in part without priorwritten permission. Every effort has been made to verify allinformation. Products may vary in appearance from thosepictured.

The information expressed is intended as a recommendationonly, based on our tests and experience. However, we cannotaccept any responsibility for results in individual casesbecause of the wide variety of applications as well asstorage and processing conditions beyond our control. Thisalso applies when making use of our technical andcommercial customer service which is supplied free ofcharge and without obligation. We always recommend thatyou carry out individual tests. We guarantee the consistentquality of our products. Subject to technical changes anddevelopments.

Würth UK Limited cannot accept responsibility for any errorsor omissions or for any losses that may arise as a result. WUK/pjc-09/10-199923

Documents

Construction Product Range