Embed Size (px)
Citation preview
1
2017PRODUCTCATALOG
1-800-368-2278 www.conquestind.com
2017
TABLE OF CONTENTSLINE BORING MACHINES..................................................................32-46 DUAL 23–SPINDLE LINE BORING MACHINE.............................4HINGE BORING MACHINE WITH PNEUMATIC HINGE PRESS...........5MINI 13-SPINDLE LINE BORING MACHINE..........................................613-SPINDLE “STANDARD” LINE BORING MACHINE.........................7PNEUMATIC 23-SPINDLE LINE BORING MACHINE...........................823-SPINDLE “DEDICATED” CONSTRUCTION DRILL...........................9QUICK RELEASE CHUCKS & DRILL BITS..............................................10
3
LINE BORINGMACHINES
HINGE BORING MACHINE Sturdy Machined Steel Casted Base Pneumatic Hold Downs Variable Speed Head Lowering Mechanism Precision Aluminum Fence/Ruler Mepla & Blum Compatible Hinge Installer Arm Interchangeable Spindle Head Available single phase 110 volt, 220 volt. Optional - 3 phase 220 volt, 440 volt.
ALL MACHINES BUILT IN THE USA WITH: TEFC 3,450 RPM Baldor Motors Heat Treated Steel Helical Gears
23 SPINDLE PNEUMATICALLY OPERATED LINE BORER 64-Inch Fence with 2 Flip Stops 12.5-Inch Throat Opening Adjustable Depth and Boring Speed Available in 13 Spindle Manual & Pneumatic Optional Lift for Hinge Boring Attachment
2–46 LINE BORER (DUAL 23-SPINDLE HEADS) Independently Operated Heads 132-Inch Fence Length with 4 Flip Stops Optional Through Brake & Pneumatic Flip Stops Optional “Quick Release” Chucks
23 SPINDLE “DEDICATED” HORIZONTAL CONSTRUCTION DRILL Quick Adjust. Side Fences For Out Of Square Panels Optional “Quick Release” Chucks Optional Independent Vertical Head Available
MINI 13 SPINDLE LINE BORING MACHINE 8-Inch Throat Opening 30-Inch Fence with 2 Flip Stops Optional Fence Extensions, Flip Stops & Stand True Industrial Duty Machine For The Serious Cabinet Builder
4
2 pneumatic index pins.
2 pneumatic hold downs.
Working table height of 37.5”
Pneumatic foot pedal operation.
Operating pressure of 80-100 psi.
Motor turns off when pedal released.
32 millimeter centers, distance between fi rst and last drill = 27.7”.
30” maximum throat adjustment (from fence to point of drill bits on #2 head.)
STANDARD FEATURES & SPECIFICATIONSONE YEAR WARRANTY ON WORKMANSHIP & MANUFACTURING
2 independently operated 23-spindle boring heads with heat treated steel helical gears.
Accepts 10 millimeter fl at shank bits, 24 Lefts & 22 Rights with maximum drilling depth of 60mm (30mm with quick release option).
2 Baldor motors, 3,450 rpm, 2hp. 220 volt (5.8 amps) 60 Hz Three Phase. (440 volt 2.9 amps optional)
Machine weight (approx.) 1,225 lbs, crated 1,275 lbs.
Frame Size: Approximately 44” Wide by 48” Deep
STANDARD FEATURES & SPECIFICATIONS
2-46 DUAL 23–SPINDLELINE BORING MACHINE
FEATURES Telemechanique Control System.
132” Fence Length with 4 Flip Stops.
Dual 23-Spindle Heads for Rapid Production.
Individual Head Movement with Precision Digital Positioning.
Powered by Two BALDOR Totally Enclosed Fan Cooled Motors.
Optional Through Brake to Eliminate Breakout When Through Boring.
Optional Quick Release Chucks
Optional Pneumatic Flip Stops.
Optional 3rd Hold Down For Hard Surface Materials (HPL etc.)
Optional Dust Collection Shrouds.
5
HINGE BORING MACHINEWITH PNEUMATIC HINGE PRESS
FEATURESSturdy Machined Steel Casted Base
Pneumatic Hold Downs
Variable Speed Head Lowering Mechanism
Precision Aluminum Fence/Ruler
Mepla & Blum Compatible Hinge Installer Arm
Interchangeable Spindle Head
Available single phase 110 volt, 220 volt.Optional - 3 phase 220 volt, 440 volt.
15” x 28” Working Table
Working Pressure 80-100 psi
Voltage/Frequency 110/220 – 60Hz
Spindle Speed 3450 rpm
BALDOR Motor
Weight: 260Lb
Dimensions: 30” x 30” x 30”
STANDARD FEATURES & SPECIFICATIONSONE YEAR WARRANTY ON WORKMANSHIP & MANUFACTURING
6
FEATURES2 Heavy Duty Cast Flip Stops.
Heat-Treated Steel Helical Gears(not plastic like some machines).
8” Throat Opening (capacity to drill from edge of board).
TEFC BALDOR Motor, Dust Protected &3,450 rpm for Quick, Easy & “Cleaner” Drilling than 1,700 rpm machines.
Optional Stand.
Optional Spring Loaded Hold Downs.
Optional Additional Fence Extension,Flip stops and Manual Foot Pedal.
2 fl ip stops.
30” fence capacity. (optional 30” left and right extensions)
2 Spring loaded index pins.
13-spindle boring head with heat treated steel helical gears.
32 millimeter centers, distance between fi rst and last drill = 15”.
Baldor motor, 3,450 rpm, 3/4 hp (US HP Rating)–115 volt (9.6 amps) 60 Hz Single Phase.
Accepts 10 millimeter shank bits with one fl at side, 6 Lefts & 7 Rights.
Machine weight (approx.) 132 lbs, crated 170 lbs.
Shown with Optional Stand, extra Flip Stop.
(available for both sides)
MINI 13-SPINDLE LINE BORING MACHINE
STANDARD FEATURES & SPECIFICATIONSONE YEAR WARRANTY ON WORKMANSHIP & MANUFACTURING
“A TRUE INDUSTRIAL DUTY MACHINE BUILT FOR THE SERIOUS CABINET BUILDER”
7
13-SPINDLE “STANDARD”LINE BORING MACHINE
FEATURESSteel Helical Gears Enclosed in a Sealed Greaseable Head for Smooth Operation & Long Life.
64” Fence with 2 Flip Stops
12.5” Throat Opening (capacity to drill from edge of board).
Down Stroke Operation for Easy Viewing.
3,450 rpm TEFC BALDOR Motor (cleaner holes & easier drilling than 1,700 rpm machines.)
Optional Additional Fence Extension & Flip stops.
Optional Pneumatic Operation.
2 fl ip stops.
64” fence capacity.
2 Spring loaded index pins.
2 Spring loaded hold downs.
32 millimeter centers, distance between fi rst and last drill = 15”.
Baldor motor, 3,450 rpm, 1hp – 115/230 volt (11.8/5.9 amps)
60 Hz Single Phase.
13-spindle boring head with heat treated steel helical gears.
Accepts 10 millimeter fl at shank bits, 6 Lefts & 7 Rights.
Optional Pneumatic Operation, (turns off when pedal released, adjustable drilling speed).
Machine weight (approx.) 420 lbs, crated 450 lbs. Pneumatic 470 lbs.
STANDARD FEATURES & SPECIFICATIONSONE YEAR WARRANTY ON WORKMANSHIP & MANUFACTURING
8
PNEUMATIC 23-SPINDLELINE BORING MACHINE
FEATURESSteel Helical Gears Enclosed in a SealedGreaseable Head for Smooth Operation & Long Life.
Pneumatic Operation for Fast Cycle Times.
64” Fence with 2 Flip Stops.
Down Stroke Operation for Easy Viewing.
12.5” Throat Opening (capacity to drill from edge of board).
3,450 rpm TEFC BALDOR Motor.
Optional Additional Fence Extension& Flip Stops.
2 fl ip stops.
64” fence capacity.
2 Spring loaded index pins.
2 Spring loaded hold downs.
Pneumatic foot pedal operation.
Motor turns off when pedal released.
Working Pressure 80-100 psi
32 millimeter centers, distance between fi rst and last drill = 27.7”.
23-spindle boring head with heat treated steel helical gears.
Baldor motor, 3,450 rpm, 2hp – 220 volt (11.5 amps) 60 Hz Single Phase.
Accepts 10 millimeter fl at shank bits, 12 Lefts & 11 Rights.
Machine weight (approx.) 440 lbs, crated 470 lbs.
STANDARD FEATURES & SPECIFICATIONSONE YEAR WARRANTY ON WORKMANSHIP & MANUFACTURING
9
FEATURES64” Back Fence – Supplied With Optional “Bottom Up” Vertical Drilling Head. (3.5” Throat Opening - Max Distance Allowed from Edge of Panel when Vertical Drilling in “Face” of Board.) Fence Removed for Horizontal Drilling
Comes Standard With Dedicated Horizontal Head.
2” Thick Steel Work Table.
Telemechanique Control System.
Powered by TEFC Baldor Motor(s).
“Quick Adjust” Horizontal Side Fences For Out of Square Panels.
Optional Dedicated Vertical Drilling Axis. (elimi-nates need for a single “fl ip up/fl ip down” head and possible loss of tolerances).
Optional 64” Fence with Vertical Option (2 minute change over).
Optional “Quick Release” Chucks.
Optional Additional Hold Downs.
23-SPINDLE “DEDICATED”CONSTRUCTION DRILL
Working table height of 37.5”
3 pneumatic hold downs.
Index pin (for vertical drilling)
Pneumatic foot pedal operation.
Operating pressure of 80–100 psi.
Motor turns off when pedal released.
23-spindle head(s) heat treated steel helical gears.
32 mm centers, dist. between fi rst & last drill = 27.7”
Baldor motor, 3,450 rpm, 2hp – 220 volt (6.2-5.8/2.9 amps) 60 Hz Three Phase. (optional 440 volt and 2.9 amps)
Accepts 10 millimeter fl at shank bits, 12 Lefts & 11 Rights (per head) - (Maximum Drilling Distance From Edge Of Board with Optional Vertical Head is 3.5”)
Machine weight (approx.) 1175 lbs, crated 1225 lbs, Footprint: 32” wide x 40” deep.
Optional 2nd motor with vertical head.
One Year Warranty On Workmanship & Manufacturing.
STANDARD FEATURES & SPECIFICATIONSONE YEAR WARRANTY ON WORKMANSHIP & MANUFACTURING
10
QUICK RELEASECHUCKS & DRILL BITS
ACCEPTS BITS WITH 10MM SHANK WITH ONE FLAT SIDE. FITS SPINDLE REQUIRING 10MM SHANK WITH ONE FLAT SIDE.
OPTION FOR CONQUEST LINE BORING MACHINES:
Or any machine with spindles accepting a 10mm shank with one fl at side. (adequate clearance required.)
Brad Point, 5mm x 57mm Brad Point, 8mm x 57mm “V” Point, 5mm x 57mm “V” Point, 5mm x 70mm
BO-BIT350 BO-BIT35110mm 10mm 10mm 10mm 10mm 10mm 10mm
5mm5mm5mm5mm
57m
m
57m
m
70m
m
70m
m
45m
m
45m
m
34m
m
34m
m
32m
m
32m
m
32m
m
32m
m
57m
m
57m
m
57m
m
57m
m
5mm5mm 8mm8mm
10mm
BO-BIT357 BO-BIT356 BO-BIT354 BO-BIT355 BO-BIT352 BO-BIT353
Part No.: BO-QUICKRLS
DRILL BITS
2-46–Dual 23 Spindle Line Borer 23 Spindle Construction Drill
25.40mm25.40mm
25.40mm
25.40mm
25.40mm
.1.00”.1.00”
.1.00”
.1.00”
.1.00”
11
CONTACT USfor further info about all our modelsand for a dealer near you:
12740 Lakeland RoadSanta Fe Springs, CA 90670Toll Free: 1-800-368-2278Local: 562-906-1111Fax: [email protected]
