4
Press Form U Connection System HEATING AND WATERING VALVES PRODUCTION H TH Pex - Al - Pex Approved by For profile For pipes DVGW W534 TH - H - U Pex Pex Al Pex Cusmart

Connection System Press Form

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Connection System Press Form

Press Form

U

Connection System

HEATING AND WATERING VALVES PRODUCTION

H

TH

Pex - Al - Pex

Approved by

For profile

For pipes

DVGW W534

TH - H - U

PexPex Al PexCusmart

Page 2: Connection System Press Form

Keep on developing and increasing product range, Brass Form presents the new innovate product line Press Form which are been design and produce under certified procedures according to ISO 9001 : 2000.

Press Form fittings are unique such are designed to cooperate with e kind of pipes Pex / Pex - Al - Pex / Cusmart with 3 different press profiles ΤΗ - Η - U. Yet the fittings are ape DVGW W534 approved.

INSTALLING INSTRUCTIONS

• Max temperature: 95 oC.• Max operation pressure 10 Bar.

Appropriate for drinking water.Brass according to DIN 50930-6.

• Heating and Plumping installation.

• Air condition and air pressure.

• External and internal installation.

OPERATION LIMITS USE

STEP 1. STEP 2.

STEP 3. STEP 4.

With the use of the appropriate cutting tool

cut the pipe vertical attending not to be

warped.

Check the pipe and secure that there are no elements that can destroy the O-rings.

Scrape and calibrate the external and internal

surface of the pipe.

Put the fitting to the pipe and check from the open point of the fitting if the pipe steps to the fitting.

Put the appropriate pressing jaw on the

machine and press the fitting till the point of the

jaw connect.

The press procedure has been completed.

Pex - Al - Pex Pex Cusmart

TH

H

U

TH

H

U

TH

H

U

STEP 5. STEP 6.

PRESS FORM

Page 3: Connection System Press Form

• Steel AISI304• 100% corrosion protected• Secure connection with brass body

Stainless Steel Ring

• Brass CW617N• Dynamic design• Heavy duty• Threads: Fem. ( ISO 228 ) / Male ( ΙSO 7-1 )

Brass Forged Body

• EPDM 70 Peroxide according to DVGW - W270 / DVGW - W534 / EN681 - 1 approved for drinking water and food• Thermal resist (-40 οC - 150 oC)

O - rings

• Polypropylene ( PP )• Securing from electrolysis • Big gap for easy optical control• Different surface for each dimension ( Φ )

Plastic Ring

O 16 O 18 O 20

1

2

3

4

CHEMICAL SYNTHESIS OF BRASS RAW MATERIAL

DIMENTION TABLE

OtherData

SIZE

YES

FORM

YES YES

YES YES YES

YES YES YES

1

2

3

4

Page 4: Connection System Press Form

ww

w.n

ikol

aoua

rts.g

r

Pex - Al - Pex