1
ORYX GAS A Safety 2 Always leave at least 1.5 metres between the cylinder and any source of heat, flame or sparks. 1·5 m 1·5 m 1·5 m 2 Check the valve functions properly and then close it before removing the safety seal. 4 Keep cylinders out of the reach of children. 6 With Oryx Gas you are safe. 6 When changing cylinder, always insist on the true Oryx Gas brand. 1 Keep away from sources of heat and make sure the area is well ventilated. 3 Always use and store cylinders in an upright position in ventilated areas, never in the basement. 3 Check the presence and quality of the gasket. B Connecting your cylinder 1 Never carry the cylinder by the valve. 5 A half-turn of the valve is enough to open the cylinder and remember to close it after use. 5 Never use a flame to detect a leak, but use soapy water. 4 The hose should not exceed 1.5 metres. Make sure it is in good condition and that the expiry date is marked on it. Check the regulator is in good condition.

Congas - Gauteng Gas Supplier - Oryx Gas safety handout EN · 2015. 8. 6. · Title: Oryx Gas safety handout_EN.indd Created Date: 6/17/2013 6:21:42 PM

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

  • ORYX GAS

    A Safety

    2 Always leave at least 1.5 metres between the cylinder and any source of heat, fl ame or sparks.

    1·5 m 1·5 m

    1·5 m

    2 Check the valve functions properly and then close it before removing the safety seal.

    4 Keep cylinders out of the reach of children.

    6 With Oryx Gas you are safe. 6 When changing cylinder, always insist on the true Oryx Gas brand.

    1 Keep away from sources of heat and make sure the area is well ventilated.

    3 Always use and store cylinders in an upright position in ventilated areas, never in the basement.

    3 Check the presence and quality of the gasket.

    B Connecting your cylinder

    1 Never carry the cylinder by the valve.

    5 A half-turn of the valve is enough to open the cylinder and remember to close it after use.

    5 Never use a fl ame to detect a leak, but use soapy water.

    4 The hose should not exceed 1.5 metres. Make sure it is in good condition and that the expiry date is marked on it. Check the regulator is in good condition.