Conforms to HazCom 2012/United States SAFETY …JT EATON , STICK-EM®, PEST CATCHERS®, STICK-A-FLY®, ELEPHANT SIZE , EIGHT BALL, TRAP-EM , STICK-EM® PRO SERIES, DOUBLE JEOPARDY

JT EATON™, STICK-EM®, PEST CATCHERS®, STICK-A-FLY®, ELEPHANT SIZE™, EIGHT BALL, TRAP-EM™, STICK-EM® PRO SERIES, DOUBLE JEOPARDY™ & JAWZ™ GLUE TRAPS

Hot Melt Adhesive/Thermoplastic.

Solid.

GHS product identi

Other means of ident on

Product type

Emergency telephone number (with hours of operation)

Section 1. Identi:

:

:

:

Supplier's details :

Ident uses

JT EATON™ GLUE TRAPS

SAFETY DATA SHEETConforms to HazCom 2012/United States

J.T. EATON & CO., INC.1393 East HIGHLAND RoadTWINSBURG, OH 44087 U.S.A.Tel: 330-425-7801Toll Free: 800-321-3421Web site: www.jteaton.com

1-800-664-9042 or N.P.I.C. 1-800-858-73788:30 am to 5:00 pm EST

Rodent and Insect Trap.

Product code : 100, 111-00, 111-00PRE6, 111PRE, 111-24, 122, 122PRE , 157, 166, 182B, 185, 199, 100N,100S, 100N-6, 133N, 144, 155N, 133P, 155P, 144P, 100P, 157P, 198-12P, 233P, 198, 198-12, 233N, 288, 289, 844, 442, 443, 444, 130 & 150

Section 2. Hazards id

Not classn of the substance or mixture

:

Signal word : No signal word.

Hazard statements : No know ects or critical hazards.

Precautionary statements

Prevention : Not applicable.

Response : Not applicable.

Storage : Not applicable.

Disposal : Not applicable.

GHS label elements

OSHA/HCS status : While this material is not considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200), this SDS contains valuable information critical to the safe handling and proper use of the product. This SDS should be retained and available for employees and other users of this product.

Hazards not otherwise : None known.

1/9Tel : +1-888-GHS-7769 (447-7769) / +1-450-GHS-7767 (447-7767)www.kmkregservices.com www.askdrluc.com www.ghssmart.com

Section 3. Composition/information on ingredients

There are no ingredients present which, within the current knowledge of the supplier and in the concentrations us to health or the environment and hence require reporting in this section.

Other means of ident on

: Hot Melt Adhesive/Thermoplastic.

CAS number : Not available.

Substance/mixture

Product code : 100, 111-00, 111-00PRE6, 111PRE, 111-24, 122, 122PRE , 157, 166, 182B, 185, 199, 100N,100S, 100-N, 133N, 144, 155N, 133P, 155P, 144P, 100P, 157P, 198-12P, 233P, 198, 198-12, 233N, 288, 289, 844, 442, 443, 444, 130 & 150

CAS number/other iden

:

Occupational exposure limits, if available, are listed in Section 8.

Substance

Any concentration shown as a range is to protect c lity or is due to batch variation.

Wash out mouth with water. Get medical attention if symptoms occur.

Immediately yes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation occurs.

Flush contaminated skin with plenty of water. Get medical attention if symptoms occur.

Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if symptoms occur.

Section 4. First aid measures

Eye contact

Skin contact

Inhalation

Ingestion :

:

:

:

Protection of : No special protection is required.

Notes to physician : Treat symptomatically.

Description of necessary

ts : No speci ment.

Most important symptoms/e nd delayed

Inhalation : No know ects or critical hazards.

No know ects or critical hazards.:Ingestion

Skin contact : No know ects or critical hazards.

No know ects or critical hazards.:Eye contact

Over-exposure signs/symptoms

Skin contact

Ingestion

Inhalation No know ects or critical hazards.

No know ects or critical hazards.


:

:

:

Eye contact : No know ects or critical hazards.

Potential acute health

See toxicological information (Section 11)

Indication of immediate medical attention and special treatment needed, if necessary



Section 5. hting measures

No special measures are required.

Hazardous thermal decomposition products

from the chemical

No speci

No speci zard.

Fire- wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Special protective equipment for hters

Use an extinguishing agent suitable for the surroundiExtinguishing media

:

:

:

None known.

Suitable extinguishing media

:

Unsuitable extinguishing media

:

Special protective actions ters

:

Section 6. Accidental release measures

Environmental precautions

Personal precautions, protective equipment and emergency procedures

:

: Put on appropriate personal protective equipment.

Avoid dispersal of spilled material and runo and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).

Methods and materials for containment and cleaning up

For non-emergency personnel

For emergency responders : If specialized clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also the information in "For non-emergency personnel".

Move containers from spill area. Prevent entry into sewers, water courses, basements or con d areas. Vacuum or sweep up material and place in a designated, labeled waste container. Dispose of via a licensed waste disposal contractor. Note: see Section 1 for emergency contact information and Section 13 for waste disposal.

:Spill

Section 7. Handling and storage

Advice on general occupational hygiene

Conditions for safe storage,including any incompatibilities

Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating,drinking and smoking. See also Section 8 for additional information on hygiene measures.

Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.

:

:

Protective measures Put on appropriate personal protective equipment (see Section 8).:

Precautions for safe handling



Section 8. Exposure controls/personal protection

Hand protection

Use a properly a complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.

Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.

Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists,gases or dusts.

Eye/face protection

Respiratory protection :

:

:

Body protection Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

:

Environmental exposure controls

: Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation.

Appropriate engineering controls

: Good general ventilation should be su worker exposure to airborne contaminants.

Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Ensure that eyewash stations and safety showers are close to the workstation location.

Hygiene measures :

Control parameters

Individual protection measures

Occupational exposure limits

Skin protection

Other skin protection : Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

None.

Section 9. Physical and chemical properties

Physical state

Melting point

Vapor pressure

Vapor density

Solid. [Tacky.]

162.78°C (325°F)

Not available.

Negligible.

Characteristic. Petroleum.Odor

pH

Clear to pale yellow.Color

Evaporation rate Negligible.

Flash point Closed cup: >170°C (>338°F) [Pensky-Martens.]

Not available.

Not available.Odor threshold

:

::

:

:

:

:

:

:

:

Appearance

Boiling point : Not available.

Flammability (solid, gas) : Not available.Lower and upper explosive

mable) limits: Not available.



Section 9. Physical and chemical propertiesRelative density

Solubility

0.93

Insoluble in water.

Auto-ignition temperature Not available.

Not available.

Viscosity Not available.

Partition co t: n-octanol/water

:

::

:

:

Decomposition temperature : Not available.

Section 10. Stability and reactivity

Hazardous decomposition products

Conditions to avoid No speci

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

The product is stable.Chemical stability

Reactive or incompatible with the following materials: oxidizing materials.

:

:

:

Incompatible materials :

Possibility of hazardous reactions

: Under normal conditions of storage and use, hazardous reactions will not occur.

Reactivity : No speci vity available for this product or its ingredients.

Section 11. Toxicological information

Carcinogenicity

organ toxicity (single exposure)

Information on toxicolo

Acute toxicity

Irritation/Corrosion

Sensitization

There is no data available.





Information on the likely routes of exposure

No know ects or critical hazards.:Eye contact

organ toxicity (repeated exposure)

Aspiration hazard

: Dermal contact. Eye contact. Inhalation. Ingestion.

Potential acute health





Section 11. Toxicological informationInhalation : No know ects or critical hazards.

No know ects or critical hazards.:Ingestion

Skin contact : No know ects or critical hazards.

No know ects or critical hazards.General :

No know ects or critical hazards.Carcinogenicity :

No know ects or critical hazards.Mutagenicity :

No know ects or critical hazards.Teratogenicity :

Development : No know ects or critical hazards.

: No know ects or critical hazards.

Symptoms related to the physical, chemical and toxicological characteristics

Skin contact

Ingestion

Inhalation No know ects or critical hazards.



:

:

:

Eye contact : No know ects or critical hazards.

Potential chronic health e ects

Delayed and immediate e ects and also chronic e ects from short and long term exposure

Numerical measures of toxicityAcute toxicity estimates

Potential immediate : No know ects or critical hazards.Short term exposure

Potential delay ts : No know ects or critical hazards.

Potential immediate : No know ects or critical hazards.Long term exposure

Potential delay ts : No know ects or critical hazards.


Section 12. Ecological information

Bioaccumulative potential

Toxicity

Persistence and degradability

Mobility in soil






Section 12. Ecological information

Other adv : No know ects or critical hazards.

Soil/water partition nt (K OC )

: There is no data available.

Section 13. Disposal considerationsThe generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction. Waste packaging should be recycled. Incineratio l should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Empty containers or liners may retain some product residues. Avoid dispersal of spilled material and runo and contact with soil, waterways, drains and sewers.

:Disposal methods

Section 14. Transport information

-

-

-

-

-

-

-

Not regulated.

-

-

Not regulated. Not regulated.

- - -

DOT IMDG IATA

UN number

UN proper shipping name

Transport hazard class(es)

Packing group

Additional information

Environmental hazards

Special precautions for user

Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code

No. No. No.

Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

: Not available.

:

AERG : Not applicable.



Section 15. Regulatory informationU.S. Federal regulations

This material is not listed.

No products were found.

Massachusetts

:

:

California Prop. 65

Clean Air Act Section 112(b) Hazardous Air Pollutants (HAPs)

: Not listed

Clean Air Act Section 602 Class I Substances

: Not listed

Clean Air Act Section 602 Class II Substances

: Not listed

DEA List I Chemicals (Precursor Chemicals)

: Not listed

DEA List II Chemicals (Essential Chemicals)

: Not listed

New York : This material is not listed.

New Jersey : This material is not listed.

Pennsylvania : This material is not listed.

State regulations

TSCA 8(a) CDR Exempt/Partial exemption : Not determinedUnited States inventory (TSCA 8b) : Not determined.

SARA 302/304

SARA 304 RQ : Not applicable.


Composition/information on ingredients

SARA 311/312

: Not applicable.


Composition/information on ingredients

International regulations

Chemical Weapon Convention List Schedules I, II & III Chemicals

Montreal Protocol (Annexes A, B, C, E)Not listed.

Stockholm Convention on Persistent Organic Pollutants

Not listed.

Rotterdam Convention on Prior Inform Consent (PIC)

Not listed.

Not listed.

UNECE Aarhus Protocol on POPs and Heavy Metals

Not listed.



Section 16. Other informationHistory

Prepared by :

Key to abbreviations : ATE = Acute Toxicity EstimateBCF = Bioconcentration FactorGHS = Globally Harmonized System of Classi and Labelling of ChemicalsIATA = International Air Transport AssociationIBC = Intermediate Bulk ContainerIMDG = International Maritime Dangerous GoodsLogPow = logarithm of the octanol/water partition coeMARPOL 73/78 = International Convention for the Prevention of Pollution From Ships,1973 as m y the Protocol of 1978. ("Marpol" = marine pollution)UN = United Nations

Date of issue mm/dd/yyyyVersion :

:

1

01/31/2018

KMK Regulatory Services Inc.

Notice to readerTo the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein.Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.

Revised Section(s) : Not applicable.



Documents

Conforms to HazCom 2012/United States SAFETY …JT EATON , STICK-EM®, PEST CATCHERS®, STICK-A-FLY®, ELEPHANT SIZE , EIGHT BALL, TRAP-EM , STICK-EM® PRO SERIES, DOUBLE JEOPARDY