Upload
lynga
View
235
Download
0
Embed Size (px)
Citation preview
Stanton Group 8/20/2010
1
CONFIGURING YOUR SCS.1 CONTROLLERS WITH
TRAKOR PRO
There are 2 main areas in Traktor Pro that need to be configured in order to use
the SCS.1 controllers – audio and MIDI. MIDI is a “language” that allows a
controller to speak with a computer. Both the SCS.1m and SCS.1d are MIDI
controllers, so this step is important no matter which controller you own. If you
have an SCS.1m, however, you will also need to set up the audio in Traktor. This
is because the SCS.1m is not only a MIDI controller, but also an audio interface (or
sound card).
Stanton Group 8/20/2010
2
SETTING UP THE MIDI
(1) Download and Install the SCS1 related software. If not already installed, it can
be downloaded from the SCS.1 product page on our website.
(2) Open Traktor. Then go to File>Controller Manager.
(3) A preferences box will open. The navigation is on the left side. Make sure
you're in the Controller Manager.
Stanton Group 8/20/2010
3
Here, you’ll check the ports associated with SCS1 DaRouter in both the MIDI in
and MIDI out. Look at the DEVICE dropdown and you'll probably see the words
"Generic Keyboard". Click there and you'll see a "Generic MIDI" entry. Select
that, and then look to the right for the IN-Port and Out-Port. Make sure that you
ALWAYS have "From SCS.1 DaRouter" and "To SCS.1 DaRouter". It's especially
important to check this after you've imported a TSI. This being set incorrectly is
the most common problem we see with the SCS.1 controllers.
Stanton Group 8/20/2010
4
(4) When you’re done with that, look in the bottom right corner for the IMPORT
button.
Press it, and an explorer window will open. By default, DaRouter stores the
configuration files for the different included presets in the following directories.
In WINDOWS, the path to the file is…
Windows XP
Windows 7 / Vista
Stanton Group 8/20/2010
5
...Documents and Settings\All Users\Application Data\Stanton SCS.1
DaRouter (Windows XP)
...Program Data\Stanton SCS.1 DaRouter (Vista and Windows 7)
Inside this folder, you can find folders for supported applications, and inside each
application folder is the configuration file for your software. So in the case of
Traktor in Windows XP, the directory you'll find your tsi file in would be...
...Documents and Settings\All Users\Application Data\Stanton SCS.1
DaRouter\Traktor PRO Presets\SCS1 TPRO V2.03.tsi
Another way to get to your presets folder is by using the Windows START button.
If you go to Start>Programs>Stanton>SCS1 DaRouter, you'll see a folder named
"Presets". This will take you directly to the path I outlined above.
In OSX, the path to your file is…
...home\Stanton SCS1 DaRouter\
Your home directory shows up in Finder with a house icon next to it. It will not
necessarily be named "home" but rather the user that is currently logged into the
computer. In this directory, you'll find folders for all the installed presets. For
your Traktor tsi file, open...
...home\Stanton SCS1 DaRouter\Traktor PRO Presets
Stanton Group 8/20/2010
6
Once you've located your tsi file, select it and press OPEN to load SCS1 TPRO
v2.03.tsi into Traktor. This will open another smaller window.
Leave everything here checked and press OK. This will bring you back to the
Controller Manager window in Traktor preferences.
Under DEVICE, it might show “Generic Keyboard”. This is normal. The DEVICE setting isn’t an either/or setting, so seeing the Generic Keyboard loaded doesn’t mean that your other interfaces aren’t working. Let’s make sure that TSI you loaded is set up correctly. Click the DEVICE drop-down to select the Generic MIDI device. You should now see that it’s been re-named by the loaded TSI.
Stanton Group 8/20/2010
7
To the right of the DEVICE drop-down is the IN and OUT ports. Click on the IN port, and select FROM SCS.1 DAROUTER. Next, click on the OUT port and select TO SCS.1 DAROUTER. Now press CLOSE in the bottom right corner.
Stanton Group 8/20/2010
8
If you modify a MIDI interface in Traktor Pro and you find that the settings do not
"stick" (meaning that you have to go back and re-select the MIDI interface again),
please press the RESTART button in the SCS1 DaRouter and try it again.
Your MIDI should now be set up properly in Traktor Pro.
Stanton Group 8/20/2010
9
CONFIGURING THE AUDIO
If you have an SCS.1m, you will need to follow the steps in this section as well. If
you only have an SCS.1d, you can skip this section.
(1) Go to File>Audio Setup in Windows, or Setup>Audio Setup in OSX
(2) Once in Audio Setup, in the AUDIO DEVICE drop down, select "Stanton 1394
ASIO Driver" in Windows, or "SCS.1m (****)” in OSX.
Stanton Group 8/20/2010
10
(3) Now select "Output Routing" in the left hand navigation.
Use the settings below. Please note that settings for both OSX and Windows are
provided. The "(****)" in the OSX settings will reflect your particular SCS.1m
device ID.
MIXING MODE
Internal (This is the setting to choose whether you're using an external audio mixer or not. The SCS.1m isn't an
analog audio mixer, but instead an audio interface and MIDI controller. This is why we select the
"Internal" setting here).
Stanton Group 8/20/2010
11
OUTPUT MONITOR
5: Headphones Out L (WIN) / 5: SCS.1m (****) Out 4 (OSX)
6: Headphones Out R (WIN) / 6: SCS.1m (****) Out 5 (OSX) (At first glance, this looks like it would be your booth monitor, but in Traktor Pro it's actually the output
of the CUE).
OUTPUT MASTER
1: Main Out L (WIN) / 5: SCS.1m (****) Out 0 (OSX)
2: Main Out R (WIN) / 5: SCS.1m (****) Out 1 (OSX) (This is, of course, your mains output).
OUTPUT RECORD
3: Zone Out L (WIN) / 5: SCS.1m (****) Out 2 (OSX)
4: Zone Out R (WIN) / 5: SCS.1m (****) Out 3 (OSX) (This output is really kind of a wildcard. It can be your booth monitor output, a recording output, etc)
(4) Press CLOSE in the bottom right corner of the PREFERENCES window.
You should now be properly configured to run your SCS.1 controllers with Traktor Pro.
Stanton Group 8/20/2010
12
HELP
We hope that this help document gives you all the information you need to get up and running. If you have any additional questions, please feel free contact our Customer Support Monday through Friday at +1 954.316.1500 from 9AM to 6PM EST. We also have a lot of great information on our forums... http://forums.stantondj.com/ And be sure to check our Knowledge Base for answers to common issues and questions. http://www.stantondj.com/activekb/
LEGAL
Windows is a registered trademark of Microsoft Corporation in the United States and other countries OSX is a registered trademark of Apple Inc. Traktor and Traktor Pro are registered trademarks of Native Instruments