Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Conductive Polymer AluminumSolid Capacitors
Products Catalog
2020
g
2020.8
Conductive Polymer Aluminum Solid Capacitors
SMD type
18 to 680 E7 8.0 6.9●●●●-55 to 105 2.5 to 16 100 to 560
-55 to 105 2.5 to 50 10 to 25 39 to 1500
E12 8.0 11.9-55 to 125 2.5 to 50 12 to 20 68 to 2700 F12 10.0 12.6
E12 8.0 11.9
C65 6.3 6.4-55 to 105 2.5 to 50 20 to 35
C65 6.3 6.4-55 to 125 2.5 to 50 20 to 35 18 to 680 E7 8.0 6.9●●●-55 to 125 2.5 to 16 15 to 24 100 to 560
-55 to 125 2.5 to 50 10 to 25 39 to 1500
1000 F10 10.0 10.0
560 E10 8.0 10.0
-55 to 125-55 to 125
14 to 2512 to 20
6016 to 50
-55 to 105 16 8 270 C10 6.3
●
31-Aug-20
High voltageLarge capacitance
125℃ 1000 h
Larg
e ca
p.
Smal
l siz
e/Lo
w p
rofil
e
Low
ESR
Size
cod
eRatedcap.
range(μF)
ESR(mΩ)
Ratedvoltagerange(V)
Categorytem. range(℃)
27 to 40-55 to 105 16 to 50
16 to 25
25 to 3025 to 30
-55 to 125-55 to 125-55 to 125
-55 to 12510.0
-55 to 105
63 to 100
5.0
7.9
F12B6C6E7E12
10.08.0
F12
ΦD L
●●
6.8 to 1815 to 3915 to 56
●●
16 to 5016 to 50
1000
6.9
-55 to 125-55 to 125-55 to 125-55 to 125-55 to 125
63 to 100
5.95.96.9
16 to 50
-55 to 125
Hig
h vo
ltage
-55 to 12563 to 10063 to 100
16 to 5016 to 50
16 to 5016-55 to 125
16 to 50
15 to 24
Line up
10.0
10 to 18018 to 27039 to 560
68 to 100010 to 10022 to 22033 to 330
27 to 8227 to 4022 to 4022 to 3514 to 25
12 to 2027 to 80
High voltageLarge capacitance
125℃ 1000 h
16 to 50
50 to 60
B6C6E7
Size(mm)
Long
life
/Hig
h re
liabi
lity
11.9
12.65.95.96.9
16
11.912.6
E12F10
22 to 3522 to 35
8.0
10.05.06.38.08.0
10.0
68 to 680120 to 1200
-55 to 105-55 to 105
-55 to 105-55 to 105
-55 to 105
●
●
●●
-55 to 125-55 to 105-55 to 105
-55 to 105-55 to 105
-55 to 105
-55 to 105
-55 to 105-55 to 105-55 to 105-55 to 105 2.5
2.5 to 2020
16
30 to 40
40 to 4535
12
2.5 to 202.5 to 16
2.5 to 162.5 to 162.5 to 162.5 to 16
19 to 35
16 16
20 to 3520 to 3319 to 29
68 to 560120 to 680270 to 1500
15 to 12022
10 to 8222 to 18047 to 330180 to 820
18 to 270
1616 to 25
22 to 4022 to 35
6.5
16 to 25270
39 to 180
16 to 50
16 to 50
16 to 502.5 to 202.5 to 20
18
16
27 to 82
7.9
10.45.9
9.9
10.05.0
6.3
18 to 100
10 to 180
8.0
B6
F12
6.9
8.011.9
4.95.4
5.95.0 5.9
10.0 12.6
8.010.0 7.9
-55 to 105-55 to 105-55 to 105
-55 to 105
●
6.36.3
6.36.9
5.9
6.38.0
8.0
10.05.06.3
11.9
5.96.9
11.9
12.65.9
12.64.4
●
●●
●
●
●
●
●
Series Features
SVPC
SVPB
SVPA
SVPF
SVPG
SXV
SVPK
SVF
Low profile
Low ESRLarge capacitance
Low ESRHigh ripple current
Low ESRHigh ripple current
105℃ 5000 h
High voltageLarge capacitance
105℃ 5000 h
Super high voltage125℃ 1000 h
Low ESRLarge capacitnce105℃ 20000 h
Low ESRLarge capacitnce
125℃ 2000 h
SVPT
SVT
-55 to 105 2.5 to 50 12 to 20 68 to 2700 F12
25 to 40
B45
330
39 to 560
68 to 1000
2700
C6E7F8C5C55
15 to 47
E12F12
E7F8
10.0 12.6
C6E7E12
15 to 3019 to 279 to 16
5.0
8.0
6.3
6.38.0
10
E12
F12B6
B6
C8
C10L
C6E7
14 to 25
12 to 20
NEW
UPGRADE
Conductive Polymer Aluminum Solid Capacitors
SMD type
SVPDGuaranteed at 125℃
High voltage85℃ 85 % RH
●● 18 to 39E12F12
30 to 5028 to 30
10 to 568.2 to 82
45 to 6540 to 7045 to 60
22 to 4747 to 82
C6E7F8
10 to 2516 to 35
11.910.0 12.6
6.3 5.9
8.010.0 7.98.0 6.9
6.3 9.912.6
SVPS Long life ●
-55 to 105 4.0 to 10-55 to 105 16
ΦD
Super low ESRLarge capacitance ●●
25 to 3525 to 3525 to 35
-55 to 125-55 to 125-55 to 125-55 to 125-55 to 125
SVPE
10 to 15 150 to 390 B6 5.06.3 5.9
Line up
Series FeaturesCategory
tem. range(℃)
Ratedvoltagerange(V) L
ESR(mΩ)
Ratedcap.
range(μF) Si
ze c
ode
Size(mm)
Smal
l siz
e/Lo
w p
rofil
e
Larg
e ca
p.
Low
ESR
Hig
h vo
ltage
Long
life
/Hig
h re
liabi
lity
5.9
200 to 220 10 to 33 A5
-55 to 105 2.5 to 16 8 to 11 180 to 1200 C10-55 to 105 2.5 to 10 10 to 20 220 to 390 C6-55 to 105 2.5 to 6.3
4.0 5.410 470 F12 10.0
-55 to 105 4.0 to 16 30 to 90 22 to 68 B6 5.0 5.9-55 to 105 4.0 to 20 22 to 60 22 to 150 C6 6.3 5.9
6.9-55 to 105 4.0 to 16 20 to 35 100 to 680 F8 10.0 7.9-55 to 105 4.0 to 25 22 to 60 10 to 270 E7 8.0
● -55 to 105 4.0 to 20 40 to 60 22 to 150 C6SVQP Guaranteed at 125℃
6.3 5.9-55 to 105 6.3 to 20 35 to 45 47 to 220 E7 8.0 6.9
10 to 68 B6 5.0 5.9-55 to 105 4.0 to 16 200 to 260 3.3 to 33 A5
31-Aug-20
-55 to 105 2.5 to 20 12 to 20 150 to 1500 F12 10.0
-55 to 105 4.0 to 20 25 to 40 56 to 680 F8 10.0
C6 6.3 5.9-55 to 105 4.0 to 20 35 to 45 33 to 330 E7 8.0 6.9SVP Standard
7.9-55 to 105 2.5 to 20 13 to 24 100 to 680 E12 8.0 11.9
12.6
-55 to 105 2.5 to 20 23 to 60 22 to 220
4.0 5.4-55 to 105 4.0 to 20 60 to 120
Conductive Polymer Aluminum Solid Capacitors
Radial lead type
C10 6.3Low ESRHigh ripple current
105℃ 5000 h● ● -55 to 105 16 8
-55 to 105
Line up
Series FeaturesCategory
tem. range(℃)
Ratedvoltagerange(V) L
16 to 35
ESR(mΩ)
Ratedcap.
range(μF) Si
ze c
ode
Size(mm)
Smal
l siz
e/Lo
w p
rofil
e
Larg
e ca
p.
Low
ESR
Hig
h vo
ltage
Long
life
/Hig
h re
liabi
lity
ΦD
SEF
-55 to 125-55 to 125-55 to 125● 8.0 6.9
16 to 35 14 to 20 82 to 560 E12 8.0 11.9
22 to 35 22 to 180
12 to 18 120 to 1000 F13 8.0-55 to 125
8.0 6.9
C6 6.3 5.916 to 35 22 to 30 39 to 270 E7
12.925 to 50 25 to 35 22 to 82 C6 6.3 5.9
16 to 25 68 to 270 E12 8.0 11.9-55 to 125 25 to 50 24 to 35 33 to 120 E7-55 to 125
F13 8.0 12.9-55 to 105 16 10 270 C9 10.0 8.9-55 to 125 25 to 50 14 to 20 120 to 470
9.916 8 470
6.963 to 100 50 to 60 15 to 39 F8 8.0 7.9
E9 8.0 8.9
63 to 100 60 6.8 to 1816 8 560 E13 8.0 12.9
270
SXE
●SEPF ●
-55 to 125
Small sizeLow profile
High voltageLarge capacitance
105℃ 5000 h
●
63 to 100
-55 to 105
-55 to 105
-55 to 125-55 to 105-55 to 105
16 to 35
-55 to 125-55 to 125
SEP
SEQP
SEPC
-55 to 105-55 to 105
82 to 560
7 to 10 470 to 2700
●●● ●
18 220
2.5 to 162.5 to 16
16 180 to 270
2.5 7
●
31-Aug-20
2.5 to 16
12 to 20 150 to 1500
●
-55 to 105 2.5 to 20 13 to 24 100 to 680 E12 8.0
E7 8.0 6.9-55 to 105 4.0 to 20
-55 to 105
25 to 40 56 to 680 F8
10.0
11.9
5.9E7 8.0 6.9
6.3-55 to 125 4.0 to 20 40 to 60 22 to 150 C6
7.98.0
-55 to 125 4.0 to 32 25 to 80 15 to 680 F8 10.035 to 100 6.8 to 330
11.97.9
10.0 12.9-55 to 105 4.0 to 20 40 to 60 5.9-55 to 125 4.0 to 20 12 to 20 150 to 1200 F13
-55 to 105 4.0 to 2010.0
12.9F12
35 to 45 33 to 330
6.38 to 22 150 to 1000 E7 8.0
22 to 150 C6 6.3
8.0
5 to 10 180 to 1000 E9 8.0
470 to 820 E1311 to 16
10.0
13 to 50 18 to 560 E12
12.912.9
-55 to 105
8.9-55 to 105-55 to 105
11.9
10.0120 to 1000
F13
16 to 35 12 to 18 F13
7 to 8
B9
8.0
100 to 820
-55 to 105
E12
100 to 560
6.3 5.9C6
E12 8.0
8.0
5.422 to 18022 to 15018 to 100
39 to 270
6.3
14 to 20
12.9
5.4C55 6.38.9
8.0 6.9
●Standard
105℃ 5000 hGuaranteed at 125℃
Rated 32 V max.
● 25 to 4063 to 100
22 to 30-55 to 105
25 to 30
8.0
6.98.9
10 to 24 100 to 560
E7
C6 6.3 5.9
12.9
C55 6.3
E12
22 to 3530 to 35
15 to 56
7 to 10
E7
F13
11.9
5.0
C9
11.98.0
●
●
Super high voltage125℃ 1000 h
High voltageLarge capacitance
125℃ 1000 h
High voltageLarge capacitance
125℃ 1000 h●
16 to 32
●
●
25 to 50
-55 to 125 16 to 5
SEK
-55 to 105
-55 to 105 2.5 to 20
2.5 to 16
●-55 to 125 4.0 to 32
-55 to 125 4.0 to 32
16 to 35
●●
-55 to 105
-55 to 1052.5 to 16
16 to 35
Super low ESRLarge capacitance
Small sizeLow profile
105℃ 5000 h2.5 to 6.3
SEPG
New
Conductive Polymer Aluminum Solid Capacitors
● SMD type
31-Aug-20
Diagram
SVPStandard SVPA
Low ESR SVPCLarge capacitance SVPF
105℃ 5000hSVPESuper low ESR
SVPSLong life
SVQPGuaranteed at 125℃
SXV
SVPD
TPB
to 33 μF
4.0 Vto 16 V
3.3 μF
A5size
TPB
to 68 μF
4.0 Vto 20 V
10 μF
B6size
TPBto 220 μF
2.5 Vto 20 V
22 μF
C6 size
TPBto 330 μF
4.0 Vto 20 V
33 μF
E7 size
TPBto 680 μF
4.0 Vto 20 V
56 μF
F8 size
TPBto 680 μF
2.5 Vto 20 V
100 μF
E12 size
TPB~ 1500 μF
2.5 V~ 20 V
150 μF
F12 size
TPBto 82 μF
16 Vto 25 V
27 μF
B6 size
TPBto 180 μF
16 Vto 50 V
10 μF
C6 size
TPBto 270 μF
16 Vto 50 V
18 μF
E7 size
TPB16 V
560 μF
E10 size
TPBto 560 μF
16 Vto 50 V
39 μF
E12 size
SVPGLow ESR
TPBto 47 μF
16 Vto 25 V
15 μF
B45 size
TPB16 V
270 μF
C8 size
TPB16 V
270 μF
C10 size
TPBto 82 μF
2.5 Vto 20 V
10 μF
B6 size
TPBto 180 μF
2.5 Vto 20 V
22 μF
C6 size
TPBto 330 μF
2.5 Vto 20 V
47 μF
E7 size
TPBto 820 μF
2.5 Vto 16 V
180 μF
F8 size
TPBto 180 μF
2.5 Vto 16 V
39 μF
B6 size
TPBto 560 μF
2.5 Vto 16 V
68 μF
C6 size
TPBto 680 μF
2.5 Vto 16 V
120 μF
E7 size
TPBto 1500 μF
2.5 Vto 16 V
270 μF
E12 size
TPB2.5 V
2700 μF
F12 size
TPBto 390 μF
2.5, 6.3 V
150 μF
B6 size
TPB2.5 Vto 10 V
220, 390 μF
C6 size
TPB2.0, 16 V180, 1200 μF
C10 size
TPB16 V
470 μF
F12 size
TPBto 33 μF
4.0 Vto 10 V
10 μF
A5 size
TPBto 68 μF
4.0 Vto 16 V
22 μF
B6 size
TPBto 150 μF
4.0 Vto 20 V
22 μF
C6 size
TPBto 270 μF
4.0 Vto 25 V
10 μF
E7 size
TPBto 680 μF
4.0 Vto 16 V
100 μF
F8 size
TPBto 150 μF
4.0 Vto 20 V
22 μF
C6 size
TPBto 220 μF
6.3 Vto 20 V
47 μF
E7 size
TPBto 18 μF
63 Vto 100 V
6.8 μF
E7 size
TPBto 39 μF
63 Vto 100 V
15 μF
F8 size
TPBto 56 μF
63 Vto 100 V
15 μF
E12 size
TPBto 100 μF
63 Vto 100 V
18 μF
F12 size
TPB10, 25 V
10, 56 μF
C6 size
TPBto 82 μF
16 Vto 35 V
8.2 μF
E7 size
TPB25, 35 V
18, 39 μF
F8 size
TPB25, 35 V
22, 47 μF
E12 size
SVF125℃ 1000h
TPBto 82 μF
16 Vto 25 V
27 μF
B6 size
TPBto 180 μF
16 Vto 50 V
10 μF
C6 size
TPBto 270 μF
16 Vto 50 V
18 μF
E7 size
TPBto 560 μF
16 Vto 50 V
39 μF
E12 size
TPB16 V
1000 μF
F10 size
SVPK
TPBto 100 μF
16 Vto 50 V
10 μF
B6 size
TPBto 220 μF
16 Vto 50 V
22 μF
C6 size
TPBto 330 μF
16 Vto 50 V
33 μF
E7 size
TPBto 680 μF
16 Vto 50 V
68 μF
E12 size
TPBto 1200 μF
16 Vto 50 V
120 μF
F12 size
SVPBLow profile
TPB~ 120 μF
2.5 V~ 20 V
15 μF
C5 size
TPB20 V22 μF
C55 size
High ripple current
Low ESR
High voltageLarge capacitance
TPB16 V
1000 μF
F10 size
TPB25, 35 V
47, 82 μF
F12 size
125℃ 1000hSuper high voltage
High ripple currentHigh voltage
Large capacitance
Large capacitance
Guaranteed at 125℃
High voltage
125℃ 1000h
Large capacitanceHigh voltage
TPBto 1000 μF
16 Vto 50 V
68 μF
F12 size
TPBto 1000 μF
16 Vto 50 V
68 μF
F12 size
SVPTLow ESR
TPBto 560 μF
2.5 Vto 16 V
100 μF
C65 sizeLarge capacitance
105℃ 20000h
TPB16 V
330 μF
C10L size
TPBto 680 μF
2.5 Vto 50 V
18 μF
E7 size
TPBto 1500 μF
2.5 Vto 50 V
39 μF
E12 size
TPBto 2700 μF
2.5 Vto 50 V
68 μF
F12 size
SVT
TPBto 560 μF
2.5 Vto 16 V
100 μF
C65 size
TPBto 680 μF
2.5 Vto 50 V
18 μF
E7 size
TPBto 1500 μF
2.5 Vto 50 V
39 μF
E12 size
TPBto 2700 μF
2.5 Vto 50 V
68 μF
F12 size
NEW
Low ESRLarge capacitance
125℃ 2000h
UPGRADE
Conductive Polymer Aluminum Solid Capacitors
● Radial lead typeDiagram
31-Aug-20
SEPStandard SEPC
SEPFSEQP SXE
TPBto 150 μF
4.0 Vto 20 V
22 μF
C6 size
TPBto 680 μF
4.0 Vto 20 V
56 μF
F8 size
TPBto 1500 μF
2.5 Vto 20 V
150 μF
F13 size
TPBto 330 μF
4.0 Vto 20 V
33 μF
E7 size
TPBto 680 μF
2.5 Vto 20 V
100 μF
E12 size
TPB16, 32 V
22, 150 μF
C55 size
TPBto 180 μF
16 Vto 35 V
22 μF
C6 size
TPBto 270 μF
16 Vto 35 V
39 μF
E7 size
TPBto 560 μF
16 Vto 35 V
82 μF
E12 size
TPBto 1000 μF
16 Vto 35 V
120 μF
F13 size
SEF
TPBto 180 μF
16 Vto 35 V
22 μF
C6 size
TPBto 270 μF
16 Vto 35 V
39 μF
E7 size
TPBto 560 μF
16 Vto 35 V
82 μF
E12 size
TPBto 560 μF
2.5 V
100 μF
B9 size
TPB6.3 V
220 μF
C55 size
TPBto 560 μF
2.5, 16 V
100 μF
C6 size
TPBto 820 μF
2.5 Vto 16 V
100 μF
C9 size
TPBto 150 μF
4.0 Vto 20 V
22 μF
C6 size
TPBto 330 μF
4.0 Vto 32 V
6.8 μF
E7 size
TPBto 680 μF
4.0 Vto 32 V
15 μF
F8 size
TPBto 560 μF
4.0 Vto 32 V
18 μF
E12 size
TPBto 1200 μF
4.0 Vto 20 V
150 μF
F13 size
TPBto 18 μF
63 Vto 100 V
6.8 μF
E7 size
TPBto 39 μF
63 Vto 100 V
15 μF
F8 size
TPBto 56 μF
63 Vto 100 V
15 μF
E12 size
TPBto 100 μF
63 Vto 100 V
18 μF
F13 size
SEPG
TPB16 V
270 μF
C9 size
TPB16 V
270 μF
C10 size
TPB16 V
470 μF
E9 size
SEK
TPBto 82 μF
25 Vto 50 V
22 μF
C6 size
TPBto 120 μF
25 Vto 50 V
33 μF
E7 size
TPBto 270 μF
25 Vto 50 V
68 μF
E12 size
TPBto 470 μF
25 Vto 50 V
120 μF
F13 size
TPBto 1000 μF
6.3 Vto 16 V
150 μF
E7 size
TPBto 1000 μF
2.5 Vto 16 V
180 μF
E9 size
TPB16 V
180, 270 μF
E12 size
TPBto 820 μF
2.5 Vto 6.3 V
470 μF
E13 size
TPBto 2700 μF
2.5 Vto 16 V
470 μF
F13 size
TPBto 1000 μF
16 Vto 35 V
120 μF
F13 size
105℃ 5000hSuper low ESRLarge capacitance
105℃ 5000hHigh voltage
Large capacitance
105℃ 5000hGuaranteed at 125℃High voltage
125℃ 5000hSuper high voltage
125℃ 1000hHigh voltage
Large capacitance
Low ESRHigh ripple current
125℃ 1000hHigh voltage
Large capacitance
TPB16 V
560 μF
E13 size
Conductive Polymer Aluminum Solid Capacitors
◇ Part number system・Surface mount type
・Radial lead type
※1 Code 2 is used for 2.5 V products of B9, C6, C9, E7, E9 and F13 size in SEPC series.
Explanation of part numbers
SVP
(V)
20 2025 2535 35
6.3 610 1016 16
±20% M
Series
CodeCodeCodeR.voltage
3R34R7
2201002204701500
100 100
10
31-Aug-20
2.0 22.5 2R54.0 4
SVPS
R.capacitance(μF)3.34.71022 22
100
4701500
Rated voltage Rated capacitance
Rated voltage
Cap.toreranceSeries
SVTSVPTSVF
SVPKSXVSVPGSVPFSVPASVPBSVPCSVPDSVPE
R.voltageCode Series
R.capacitanceCode Cap.
torerance Code(V) (μF)2.5 2R5※1 SEF 6.8 6R8 ±20% M4.0 4 SEK 10 106.3 6 SEPG 22 2210 10 SXE 100 100
SEP 2700 2700
16 16 SEPC 220 22020 20 SEPF 470 470
SVQP
Capacitance tolerance
Capacitance tolerance Taping or forming of terminal code
Taping of leadterminal wire processcode.None suffix forregular iendth leadtype products.
Series Rated capacitance
100 100
25 25 SEQP 1000 100032 32
16 SVP 3R3 M
16 SEPC 470 M T+
t
H
W0 W
Δh
テープ台紙
W2W1
φD0P0
P 1
F
P2 P
L
t
W2
W1
W0 W
H
P0φD0
P2 P
L P 1 F
テープ台紙
Δh
t
W2
W1
W0 W
H
P0φD0
P2 P
L P 1 F
Δh
テープ台紙
Conductive Polymer AluminumSolid Capacitors
● Low ESR(10 mΩ max.)● Large capacitance(2700 µF max.)● 125 ℃ 2000 h● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.8.3 8.3
C65 6.3 6.4
E12 8.0 11.98.0 6.9 8.3 8.3
6.6 6.6E7
7.3 0.6~0.8 2.1
9.0 0.8~1.1 3.29.0 0.6~0.8 3.2
31-Aug-20Should a safety concern arise regarding this product, please be sure to contact us immediately.
4.611.0 0.8~1.110.312.6F12 10.0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
10.3
φD±0.5Sizecode P±0.2RC±0.2H±0.2W±0.2+0.1
-0.4L
Size code
Features
Specifications
Rated voltage rangeCategory temp. range –55 ℃ to +125 ℃
C65 E7 E12 F12
2.5 V to 16 V 2.5 V to 50 VNominal cap. range
Dissipation factor (tanδ)DC leakage current
±20 % (120 Hz / +20 ℃)
+125 ℃ 2000 h, rated voltage applied
≦ 200 % of the initial limit Within the initial limit
Capacitance change Within ±20 % of the initial value
Please see the attached characteristics listPlease see the attached characteristics list
100 μF to 560 μF 18 μF to 680 μF 39 μF to 1500 μF 68 μF to 2700 μF
Surface Mount Type
Dimensions (not to scale)Marking
≦ 150 % of the initial limit Within the initial limit (after voltage processing)
Capacitance changeDissipation factor (tanδ)
DC leakage current
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltage Within ±20 % of the initial valueDamp heat
(Steady state)
SVT series
Endurance
Dissipation factor (tan δ)DC leakage current
Capacitance tolerance
L R
0.2 max.
φD CPH
W⊖
⊕
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
NEW
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current(100 kHz / +105 ℃ < Tx ≦ +125 ℃)/ Allowable ripple current (100 kHz / Tx ≦ +105 ℃) Tx: Temperature measured at the top surface of aluminum case including self-heating by ripple current
*2: ESR(100 kHz to 300 kHz / +20 ℃)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
850 35 0.12 180 1000
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 31-Aug-20
Frequency correction factor for ripple currentFrequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz 100 kHz ≦ f < 500 kHzCoefficient 0.05 0.3 0.7 1
5018
6839
3539 8.0 6.9 E7 2800
4000
8.0 6.9 E7 2700
880 30 0.12 273 1000
12082 8.0 11.9 E12 1260 574 400
10.0 12.6 F12 44001390 18 0.12 840 400 35SVT120M20
25100
20180
180330
8.0 11.9 E1210.0
8.0 6.9 E7
8.0 6.9 E7
1560 14 0.12 1560 400 560390 8.0 11.9 E12 4950
10.0 12.6 F12 54001700 12 0.12 2240 400
32001010400
25 0.12 720 1000
16
100270560 400 16SVT560M
1000 10.0 12.6 F12 54001700 12 0.12 32008.0 11.9
6.3330
820
6.3 6.4 C65 33901070 15390
8.0 11.9 E12 47008.0 6.9 E7 32201010 22
4.0560 8.0 6.9 E7 32201010 22 0.12
8.0 11.9 E12 470014801500 12 0.12
1000 8.0 6.9 E7 33701060 20 0.12 500 1000
2.5
560
1500
6.3 6.4 C65 35001100 16680
2700 10.0 12.6 F12 50701600 128.0 11.9 E12 51501620 10
SVT series
Ratedvoltage
(V)
Ratedcapacitance(±20 %)
(μF)
Case size
Sizecode
(mm)
φD LRipple
current*1
(mA rms)
Allowableripple
current*1
(mA rms)
ESR*2
(mΩ max.)tan δ*3
Min.Packaging
Q'ty(pcs)
Characteristics listSpecifications Standard(Reel size : φ380)
LC*4
(μA)Part number
400
780 24 0.12 300
491 1000 1480 12 0.12 1033 400
0.12 1350 400 500 1000
1200 400 0.12 415 1000 0.12
E12 49501560 14 0.12 1792
1000 8.0 6.9 E7 33001040 22 0.12 864 1000
16SVT100M 16SVT270M
6.3 6.4 C65 2490
32001010 24 0.12 500 1000
12.6 F12 50001580 14 0.12 1650 400 46501470 16 0.12 900 400
400 10.0 12.6 F12 43001350 20 0.12 680 400 8.0 11.9 E12 38001200 25 0.12 390
0.12
2R5SVT560M 2R5SVT680M 2R5SVT1500M 2R5SVT2700M 4SVT560M 4SVT1500M 6SVT330M 6SVT390M 6SVT820M
0.12 750
0.12 300
50SVT18M 50SVT39M 50SVT68M
16SVT1000M 20SVT180M 20SVT390M 20SVT560M 25SVT100M 25SVT180M 25SVT330M 35SVT39M 35SVT82M
Conductive Polymer AluminumSolid Capacitors
● Low ESR(10 mΩ max.)● Large capacitance(2700 µF max.)● 105 ℃ 20000 h● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.
Surface Mount Type
Dimensions (not to scale)Marking
≦ 150 % of the initial limit Within the initial limit (after voltage processing)
Capacitance changeDissipation factor (tanδ)
DC leakage current
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltage Within ±20 % of the initial valueDamp heat
(Steady state)
SVPT series
Endurance
Dissipation factor (tan δ)DC leakage current
Capacitance toleranceNominal cap. range
Dissipation factor (tanδ)DC leakage current
±20 % (120 Hz / +20 ℃)
+105 ℃ 20000 h, rated voltage applied
≦ 150 % of the initial limit Within the initial limit
Capacitance change Within ±20 % of the initial value
Please see the attached characteristics listPlease see the attached characteristics list
100 μF to 560 μF 18 μF to 680 μF 39 μF to 1500 μF 68 μF to 2700 μF
Size code
Features
Specifications
Rated voltage rangeCategory temp. range –55 ℃ to +105 ℃
C65 E7 E12 F12
2.5 V to 16 V 2.5 V to 50 V
φD±0.5Sizecode P±0.2RC±0.2H±0.2W±0.2+0.1
-0.4L
31-Aug-20Should a safety concern arise regarding this product, please be sure to contact us immediately.
4.611.0 0.8~1.110.312.6F12 10.0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
10.3
7.3 0.6~0.8 2.1
9.0 0.8~1.1 3.29.0 0.6~0.8 3.2
8.3 8.3
C65 6.3 6.4
E12 8.0 11.98.0 6.9 8.3 8.3
6.6 6.6E7
L R
0.2 max.
φD CPH
W⊖
⊕
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
UPGRADE
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current(100 kHz / +105 ℃) The surface temperature of aluminum case top must not exceed 105 °C. A rise in temperature due to self-heating by ripple current should be factored in.
*2: ESR(100 kHz to 300 kHz / +20 ℃)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
SVPT series
Ratedvoltage
(V)
Ratedcapacitance
(±20 %)(μF)
Case size
Sizecode
Specifications Standard(Reel size : φ380)(mm)
φDMin.
PackagingQ'ty (pcs)
LRipple
current*1
(mA rms)
ESR*2
(mΩ max.)tan δ*3 LC*4
(μA)Part number
2.5
560 6.3 6.4 C65 3500 16 0.12 300
1500 8.0 11.9 E12 5150 10 0.12 750
2R5SVPT560M 1000680 8.0 6.9 E7 3370 20 0.12 500 2R5SVPT680M 1000
2R5SVPT1500M 4002700 10.0 12.6 F12 5070 12 0.12 1350 2R5SVPT2700M 400
4.0560 8.0 6.9 E7 3220 22 0.12 500 4SVPT560M 1000
1500 8.0 11.9 E12 4700 12 0.12 1200 4SVPT1500M 400
6.3330 6.3 6.4 C65 3390 15 0.12 415
820 8.0 11.9 E12 4700 12 0.12 1033
6SVPT330M 1000390 8.0 6.9 E7 3220 22 0.12 491 6SVPT390M 1000
6SVPT820M 400
16
100 6.3 6.4 C65 2490 24 0.12 300 16SVPT100M 1000270 8.0 6.9 E7 3300 22 0.12 864 16SVPT270M 1000560 8.0 11.9 E12 4950 14 0.12 1792 16SVPT560M 400
1000 10.0 12.6 F12 54003200 25 0.12 720 20SVPT180M 1000
12 0.12 3200 16SVPT1000M 400
0.12 1560 20SVPT390M 400560 10.0 12.6 F12 5400 12390 8.0 11.9 E12 4950 14
0.12 2240 20SVPT560M 400
25100 8.0 6.9 E7 3200
20180 8.0 6.9 E7
24 0.12 500 25SVPT100M 1000180 8.0 11.9 E12 4650 16 0.12 900 25SVPT180M 400330 10.0 12.6 F12 5000
30 0.12 273 35SVPT39M 100014 0.12 1650 25SVPT330M 400
0.12 574 35SVPT82M 400120 10.0 12.6 F12 4400 1882 8.0 11.9 E12 4000 20
0.12 840 35SVPT120M 400
5018 8.0 6.9 E7 2700
3539 8.0 6.9 E7 2800
50SVPT39M 40068 10.0 12.6 F12 4300
35 0.12 180 50SVPT18M 100039 8.0 11.9 E12 3800
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 31-Aug-20
Characteristics list
Frequency correction factor for ripple currentFrequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz 100 kHz ≦ f < 500 kHzCoefficient 0.05 0.3 0.7 1
20 0.12 680 50SVPT68M 40025 0.12 390
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
Conductive Polymer AluminumSolid Capacitors
● High voltage (50 V max.)● Large capacitance (1000 μF max.)● 125 ℃ 1000 h● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.*1:±0.5
3.2
1.4C6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1
5.3 6.0 0.6 to 0.8
9.0 0.6 to 0.8
11.0 0.8 to 1.1 4.6
9.0 0.8 to 1.1F10 10.0 10.0*1 10.3 10.3 11.0 0.8 to 1.1 4.6
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.28-Jun-19Should a safety concern arise regarding this product, please be sure to contact us immediately.
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltageCapacitance change Within ±20 % of the initial value
Dissipation factor (tanδ) ≦ 150 % of the initial limitDC leakage current Within the initial limit (after voltage processing)
Size φD±0.5 L +0.1 W±0.2 H±0.2 C±0.2 R P±0.2code -0.4
E12 8.0 3.2
B6 5.0 5.9 5.3
11.9 8.3 8.3E7 8.0 6.9 8.3 8.3
F12 10.0 12.6 10.3 10.3
Surface Mount Type
–55 ℃ to +125 ℃Size code
Features
Specifications
Rated voltage rangeCategory temp. range
B6 C6 E7 E12 F10 F12
16 V to 25 V 16 V to 50 V 16 V 16 V to 50 V
SVF series
Damp heat(Steady state)
DC leakage currentCapacitance tolerance
Nominal cap.range
Marking
Capacitance changeDissipation factor (tanδ)
DC leakage current
Dissipation factor (tan δ) Please see the attached characteristics listPlease see the attached characteristics list
±20 % (120 Hz / +20 ℃)
+125 ℃ 1000 h, rated voltage applied Within ±20 % of the initial value ≦ 200 % of the initial limit Within the initial limit
Dimensions (not to scale)
27 μF to 82 μF 10 μF to 180 μF 18 μF to 270 μF 39 μF to 560 μF 1000 μF 68 μF to 1000 μF
Endurance
L R
0.2 max
φD CPH
W⊖
⊕
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current (100 kHz / +105 °C < Tx ≦ +125 °C) /Allowable ripple current (100 kHz / Tx ≦ +105 °C)*2: ESR(100 kHz to 300 kHz / +20 ℃)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
SVF series
16
1000
20
25
C6
E7
35
50
100 kHz ≦ f < 500 kHz
50SVF68M 400 68 10.0 12.6 F12 1350 4300 20 0.12 680
1000 39 8.0 11.9
Coefficient 0.05 0.3 0.7 1Frequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz
E12 1200 3800 25 0.12 390 50SVF39M 400 8.0 6.9 E7 850 2700 35 0.12 180 50SVF18M
35SVF82M 400 120 10.0 12.6 F12 1390 0.12 840 35SVF120M 400
E12 1260 0.12 574
10 6.3 5.9 C6 790 2500 40 0.12 100 50SVF10M 1000 18
1000 39 8.0 6.9 E7 880 0.12 273 35SVF39M 1000 22 6.3 5.9 C6 820 0.12 154 35SVF22M
82 8.0 11.9
400 330 10.0 12.6 F12 1580 0.12 1650 25SVF330M 400
1614
180 8.0 11.9 E12 1470 0.12 900 25SVF180M46505000
1000 100 8.0 6.9 1010 0.12 500 25SVF100M 1000 24
8.0 0.12 410 28 25SVF82M30003200
6.9 940
1000 56 6.3 5.9 880 0.12 280 25SVF56M 1000 47 6.3 5.9 0.12 235 25SVF47M30
3028002800
880
400 560 10.0 12.6 F12 1700 0.12 2240 20SVF560M 400
1560 20SVF390M1214 0.12
5400495011.9 E12 1560 8.0
27 5.0 5.9 B6 770 0.12 135 25SVF27M 1500 402450
480 20SVF120M 1000 180 8.0 6.9 E7 1010 0.12 720 20SVF180M 1000
2525
0.1232003200
6.3 5.9 C6 1010
3200 16SVF1000M 400 56 5.0 5.9 B6 880 0.12 224 20SVF56M 1500
1230
0.1254002800
10.0 12.6 F12 1700 10.0 10.0 F10 1350 0.12 3200 16SVF1000MX 500 164300
560 8.0 11.9 E12 1560 0.12 1792 16SVF560M 400 144950270 8.0 6.9 E7 1040 0.12 864 16SVF270M 1000 223300
0.12 262 16SVF82M 1500 180 6.3 5.9 C6 1040 0.12 576 16SVF180M 1000
2722
5.0 5.9 B6 940 30003300
φD LRipple
current*1
(mA rms)tan δ*3 LC*4
(μA)Part number
Min.Packaging
Q'ty(pcs)
Allowableripple
current*1
(mA rms)
ESR*2
(mΩ max.)
Should a safety concern arise regarding this product, please be sure to contact us immediately. 28-Jun-19Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Characteristics list
18
260028004000
Frequency correction factor for ripple current
353020
120
390
82
4400
Ratedvoltage
(V)
Ratedcapacitance
(±20 %)(μF)
Case size
Sizecode
82
Specifications Standard(Reel size : φ380)(mm)
Conductive Polymer AluminumSolid Capacitors
● High voltage (50 V max.)● 125 ℃ 1000 h● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.
SVPK series
11.0 0.8 to 1.1 4.69.0 0.8 to 1.1
3.2
1.4C6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1
5.3 6.0 0.6 to 0.8
9.0 0.6 to 0.8
B6
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.01-Nov-18Should a safety concern arise regarding this product, please be sure to contact us immediately.
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltageCapacitance change Within ±20 % of the initial value
Dissipation factor (tanδ) ≦ 150 % of the initial limitDC leakage current Within the initial limit (after voltage processing)
Size φD±0.5 L +0.1 W±0.2 H±0.2 C±0.2 R P±0.2code -0.4
E12 8.0 3.2
5.0 5.9 5.3
11.9 8.3 8.3E7 8.0 6.9 8.3 8.3
F12 10.0 12.6 10.3 10.3
Surface Mount Type
E7 E12
Features
Specifications
DC leakage currentCapacitance tolerance
Marking
Capacitance changeDissipation factor (tanδ)
DC leakage current
Dissipation factor (tan δ) Please see the attached characteristics listPlease see the attached characteristics list
±20 % (120 Hz / +20 ℃)
+125 ℃ 1000 h, rated voltage applied Within ±20 % of the initial value ≦ 200 % of the initial limit Within the initial limit
Dimensions (not to scale)
Endurance
Damp heat(Steady state)
F12–55 ℃ to +125 ℃
120 μF to 1200 μF68 μF to 680 μF33 μF to 330 μF22 μF to 220 μF10 μF to 100 μF
C6Size code B6
Rated voltage rangeCategory temp. range
16 V to 50 VNominal cap.range
L R
0.2 max
φD CPH
W⊖
⊕
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current (100 kHz / +105 ℃ < Tx ≦ +125 ℃) /Allowable ripple current (100 kHz / Tx ≦ +105 ℃)*2: ESR(100 kHz to 300 kHz / +20 ℃)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
SVPK series
100 kHz ≦ f < 500 kHzCoefficient 0.05 0.3 0.7 1
Frequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz
50SVPK120M 400 120 10.0 12.6 F12 1350 4300 20 0.12 1200
1000 68 8.0 11.9 E12 1200 3800 25 0.12 680 50SVPK68M 400
8.0 6.9 E7 850 2700 35 0.12 330 50SVPK33M
35SVPK330M 400
50
10 5.0 5.9 B6 550 0.12 100 50SVPK10M 1500 22 6.3 5.9 C6 820 2600 35 0.12 220 50SVPK22M 1000 33
1000 180 8.0 11.9 E12 1260 0.12 1260 35SVPK180M 400
1500 47 6.3 5.9 C6 930 0.12 329 35SVPK47M 1000
3527
26002950
35
22 5.0 5.9 B6 820 0.12 154 35SVPK22M
82 8.0 6.9 E7 960 0.12 574 35SVPK82M
330 10.0 12.6 F12 1390 0.12 2310
400 470 10.0 12.6 F12 1590 0.12 2350 25SVPK470M 400 14
8.05000
120 8.0 6.9 E7 1010 0.12 600 25SVPK120M 1000
400
25
33 5.0 5.9 B6 820 0.12 165 25SVPK33M 1500 82 6.3 5.9 C6 960 0.12 410 25SVPK82M 1000
2720 20SVPK680M
0.12 1350
880 20SVPK220M 1000 470 8.0 11.9 E12 1560 0.12 1880 20SVPK470M 400
2514
0.1232004950
272 20SVPK68M 1500 150 6.3 5.9 C6 1010 0.12 600 20SVPK150M 1000
3025
0.1228003200
1200 10.0 12.6 F12 1700 0.12 3840 16SVPK1200M 400 125400680 8.0 11.9 E12 1560 0.12 2176 16SVPK680M 400 144950330 8.0 6.9 E7 1040 0.12 1056 16SVPK330M 1000 223300
0.12 320 16SVPK100M 1500 220 6.3 5.9 C6 1040 0.12 704 16SVPK220M 1000
2722
5.0 5.9 B6 940 30003300
Specifications Standard(Reel size : φ380)(mm)
φD LRipple
current*1
(mA rms)tan δ*3 LC*4
(μA)Part number
Min.Packaging
Q'ty(pcs)
Allowableripple
current*1
(mA rms)
ESR*2
(mΩ max.)
35252416 25SVPK270M
12 0.122600306032004650
540012.6 F12 1700
11.9 E12 1470
5.0 5.9 B6
8.0 6.9 E7
10.0
880
1010
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-18Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Characteristics list
80
306040004400
Frequency correction factor for ripple current
252018
20
68
220
680
270
1750
Ratedvoltage
(V)
16
Ratedcapacitance
(±20 %)(μF)
Case size
Sizecode
100
Conductive Polymer AluminumSolid Capacitors
● Super high voltage (100 V max.)● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.
8.3 9.0 0.6 to 0.8
9.0 0.8 to 1.14.611.0 0.8 to 1.13.2
3.211.0 0.6 to 0.8 4.6
C±0.2 R P±0.2code -0.4
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.24-Jan-20Should a safety concern arise regarding this product, please be sure to contact us immediately.
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltageCapacitance change Within ±20 % of the initial value
Dissipation factor (tanδ) ≦ 150 % of the initial limitDC leakage current Within the initial limit (after voltage processing)
Size φD±0.5 L +0.1 W±0.2 H±0.28.3
12.6 10.3 10.3E12 8.0 11.9 8.3 8.3F12 10.0
F8 10.0 7.9 10.3 10.3E7 8.0 6.9
Rated voltage rangeCategory temp. range
63 V to 100 V
E7 F8 E12 F12
Surface Mount Type
–55 ℃ to +125 ℃Size code
Features
Specifications
SXV series
+125 ℃ 1000 h, rated voltage applied Within ±20 % of the initial value ≦ 200 % of the initial limit
6.8 μF to 18 μF 15 μF to 39 μF 15 μF to 39 μF 18 μF to 100 μF
DC leakage currentCapacitance tolerance
Nominal cap.range
Marking
Capacitance changeDissipation factor (tanδ)
DC leakage current
Dissipation factor (tan δ) Please see the attached characteristics list
Within the initial limit
Dimensions (not to scale)
Endurance
Damp heat(Steady state)
Please see the attached characteristics list±20 % (120 Hz / +20 ℃)
L R
0.2 max
φD CPH
W⊖
⊕
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current (100 kHz / +105 ℃ < Tx ≦ +125 ℃) /Allowable ripple current (100 kHz / Tx ≦ +105 ℃)*2: ESR(100 kHz to 300 kHz / +20 ℃)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
100 kHz ≦ f < 500 kHzCoefficient 0.05 0.3 0.7 1
Frequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz
400 27 10.0 12.6 F12 940 0.12 135 100SXV27M 400 22 10.0 12.6 F12 940 0.12 110 100SXV22M
400 8.0 11.9 E12 730 0.12 90 100SXV18MX 400
3040
10.0 12.6 F12 940 0.12 90 100SXV18M
500 8.0 11.9 E12 730 0.12 75 100SXV15M 400 4010.0 0.12 75 60 100SXV15MX
56 10.0 12.6 F12 400 6.8 8.0 6.9 E7 340 0.12 34 100SXV6R8M 1000
0.12 224 80SXV56M 2860
47 10.0 12.6 F12 980 0.12 188 80SXV47M 400 28
500 33 8.0 11.9 E12 780 0.12 132 80SXV33M 400
108 80SXV27MX 3555 0.1220807.9
48 80SXV12M 1000 8.0 11.9 E12 780 0.12 108 80SXV27M 400
6035
0.1211002490
8.0
214 63SXV68M 400 100 10.0 12.6 F12 1030 0.12 315 63SXV100M 400
2525
0.1232803280
F1256 8.0 11.9 E12 930 0.12 176 63SXV56M 400 252950
10.0 7.9 F8 690 0.12 122 63SXV39MX 500 50219011.9 E12 930 0.12 122 63SXV39M 400 252950
33 8.0 11.9 E12 930 0.12 104 63SXV33M 400 252950
Specifications Standard(Reel size : φ380)(mm)
φD LRipple
current*1
(mA rms)
tan δ*3 LC*4
(μA)Part number
Min.Packaging
Q'ty(pcs)
Allowableripple
current*1
(mA rms)
ESR*2
(mΩ max.)
0.12 56 63SXV18M 1000 608.0 6.9 E7 340
8.0
Should a safety concern arise regarding this product, please be sure to contact us immediately. 24-Jan-20Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
6.9 E7
10.0
1030
340
2490310031001100200023503000235030003000
Frequency correction factor for ripple current
3030
68
12
SXV series
6339
80 27
100
15
18
1100
Characteristics list
Ratedvoltage
(V)
Ratedcapacitance
(±20 %)(μF)
Case size
Sizecode
18
F8 660
980
7.9 F8 630
10.0 12.6
Conductive Polymer AluminumSolid Capacitors
● Low profile(Height 4.5 mm max.)● Low ESR(6.5 mΩ max.)● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.
C10L
*1: Ripple current(100 kHz / +105 ℃) *2: ESR(100 kHz to 300 kHz / +20 ℃*3: tan δ (120 Hz / +20 ℃) *4: After 2 minutes◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.10-Mar-20Should a safety concern arise regarding this product, please be sure to contact us immediately.
H±0.2W±0.2+0.1-0.4LφD±0.5Size
code P±0.2RC±0.21.4
2.1
2.1
C10 C10L
16 V to 25 V 16 V
Surface Mount Type
Endurance
Dissipation factor (tan δ)DC leakage current
5.3
Damp heat(Steady state)
SVPG series
Capacitance toleranceNominal cap.range
Dissipation factor (tanδ)DC leakage current
±20 % (120 Hz / +20 ℃)
+105 ℃ 5000 h, rated voltage applied
≦ 150 % of the initial limit Within the initial limit
Capacitance change Within ±20 % of the initial value
Please see the attached characteristics listPlease see the attached characteristics list
15 μF to 47 μF 270 μF 330 μF
Size code
Features
Specifications
Rated voltage rangeCategory temp. range –55 ℃ to +105 ℃
B45 C8
Dimensions (not to scale)
Characteristics list
≦ 150 % of the initial limit Within the initial limit (after voltage processing)
Capacitance changeDissipation factor (tanδ)
DC leakage current
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltage Within ±20 % of the initial value
6.6
5.0
6.3
6.66.3 7.36.0
7.3
0.6 to 0.80.6 to 0.8
1.5 to 1.8
Marking
6.6 7.3 0.6 to 0.86.65.3
6.6
7.94.4
10.4
C8B45
C10LC10 6.3 9.9 6.6
(mm)
φD LRipple
current*1
(mA rms)
ESR*2
(mΩ max.)tan δ*3 LC*4
(μA)
Ratedvoltage
(V)
Ratedcapacitance
(±20 %)(μF)
Case size
Sizecode
0.12 864 25 0.12 150 47 5.0 4.4 B45 3200
270 6.3 9.9 C10 5800 6.3 7.9 C8 5080 10
27 0.12 132 2500 2500
8 0.12 864
B452520
Specifications Standard(Reel size : φ380)
Part number
Min.Packaging
Q'ty(pcs)
16SVPG47M 16SVPG270MX 16SVPG270M
20SVPG33M 25SVPG15M
2500 900 500
30 0.12 75 15 5.0 4.4 2800 5.0 4.4 3000
2.1
16330 6.3 10.4 7500 6.5 0.12 1056 16SVPG330M 700
Frequency correction factor for ripple current
Coefficient 0.05 0.3 0.7 1Frequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz 100 kHz ≦ f < 500 kHz
33
L R
0.2 max.
φD CPH
W⊖
⊕
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
UPGRADE
NEW
Conductive Polymer AluminumSolid Capacitors
● High voltage (50 V max.)● Large capacitance (1000 μF max.)● 105 ℃ 5000 h● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.*1:±0.5
9.0 0.8 to 1.1 3.2
3.2
1.4
3.2
SVPF series
6.6C6 6.3 5.9 6.65.3 6.0 0.6 to 0.8
9.0 0.6 to 0.8
0.8 to 1.1
Size φD±0.5 L +0.1 W±0.2 H±0.2 C±0.2 R P±0.2code -0.4
4.6E12 8.0 11.9 8.3 8.3
10.3
7.3 0.6 to 0.8 2.18.3
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltageCapacitance change Within ±20 % of the initial value
Dissipation factor (tanδ) ≦ 150 % of the initial limitDC leakage current Within the initial limit (after voltage processing)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.28-Jun-19Should a safety concern arise regarding this product, please be sure to contact us immediately.
E10 8.0 8.3
11.0 0.8 to 1.1 4.6
9.0 0.8 to 1.1
F10 10.0 10.0*1 10.3 10.3 11.0
B6 5.0 5.9 5.3
10.0*1 8.3
F12 10.0 12.6 10.3
E7 8.0 6.9 8.3
68 to 1000
Surface Mount Type
–55 ℃ to +105 ℃Size code
Features
Specifications
Rated voltage range (V)Category temp. range
B6 C6 E7 E10 E12 F10 F12
16 to 25 16 to 50 16 16 to 50 16 16 to 50
Endurance
Damp heat(Steady state)
DC leakage currentCapacitance toleranceNominal cap.range (μF)
Marking
Capacitance changeDissipation factor (tanδ)
DC leakage current
Dissipation factor (tan δ) Please see the attached characteristics listPlease see the attached characteristics list
±20 % (120 Hz / +20 ℃)
+105 ℃ 5000 h, rated voltage applied Within ±20 % of the initial value ≦ 150 % of the initial limit Within the initial limit
Dimensions (not to scale)
27 to 82 10 to 180 18 to 270 560 39 to 560 1000
L R
0.2 max
φD CPH
W⊖
⊕
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current (100 kHz / +105 °C)*2: ESR(100 kHz to 300 kHz / +20 ℃)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
40 0.12 100 10
Specifications
Min.Packaging
Q'ty(pcs)
Part number
Standard(Reel size : φ380)
35
35SVPF22M 1000 35SVPF39M 1000 35SVPF82M 400 35SVPF120M 400
25
B6 25SVPF27MX 1500
C6 25SVPF47M 1000 25SVPF56M 1000
E7 25SVPF82M 1000 25SVPF100M 1000 25SVPF180M 400
0.120.12
25SVPF330M 400 180 8.0 11.9 E12 4650 900
20
20SVPF56MX 1500 20SVPF120M 1000 20SVPF180M 1000 20SVPF390M 400 20SVPF560M 400
390 8.0 11.9 E12 4950
16
1000
32008.0
0.12 224 305.0 5.9 B6 2800
3300 864 0.1222
6.9 E7
3900 1792
16SVPF82M 1500 16SVPF180M 1000 16SVPF270M 1000
560 16SVPF560MX 500 16SVPF560M 400 8.0 11.9 E12 4950 1792 0.1214
0.1218270 8.0 6.9 E7
16SVPF1000MX 500 16SVPF1000M 400 10.0 12.6 F12 5400 3200
0.120.12
3200 1612
10.0 10.0 F10 4300
6.3 5.9 C6 2500
Coefficient 0.05 0.3 0.7 1Frequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz
400
50
50SVPF10M 1000 50SVPF18M 1000
39 8.0 11.9 E12 3800
100 kHz ≦ f < 500 kHz
18 8.0 6.9 E7 2700 35 0.12 180
4300 20 0.12 680 50SVPF68M25 0.12 390 50SVPF39M 400
68 10.0 12.6 F12
1650
12.6 F12 4400 18 0.12 840 82 8.0 11.9
120 10.0E12 4000 574
100 8.0 6.9 3200 500 2416
39 8.0 6.9 E7 2800 273 22 6.3 5.9 C6 2600 154
330 10.0 12.6 F12 5000
82 8.0 6.9 3000 410 0.126.3 280 0.1230
285.9 2800
47 6.3 5.9 2800 235 27 5.0 5.9 135 0.12
0.124030
2450560 10.0 12.6 F12 5400 2240 0.1212
120 6.3 5.9 C6 3200 480 0.1225
1560 0.120.12 720
1425
tan δ*3 LC*4
(μA)ESR*2
(mΩ max.)
Should a safety concern arise regarding this product, please be sure to contact us immediately. 28-Jun-19Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
262 180 6.3 5.9 C6 3300 576
0.120.12
5.0 5.9 B6 3000 2722
8.0 10.0 E10
SVPF seriesCharacteristics list
0.12
143530
Frequency correction factor for ripple current
0.120.120.12
56
180
56
20
Ratedvoltage
(V)
Ratedcapacitance
(±20 %)(μF)
Case size
Sizecode
82
(mm)
φD LRipple
current*1
(mA rms)
Conductive Polymer AluminumSolid Capacitors
● Low ESR (18 mΩ max.)● High ripple (4240 mA rms)● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.
1.4
4.6
5.3 6.0 0.6 to 0.8
9.0 0.6 to 0.88.36.6 7.3 0.6 to 0.8 2.1
3.2
H±0.2 C±0.2 R P±0.2code -0.4Size φD±0.5 L +0.1 W±0.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.01-Nov-15Should a safety concern arise regarding this product, please be sure to contact us immediately.
F8 10.0 10.3 11.0 0.6 to 0.8
Rated voltage range Category temp. range
B6
E7C6
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltageCapacitance change Within ±20 % of the initial value
Dissipation factor (tanδ) ≦ 150 % of the initial limitDC leakage current Within the initial limit (after voltage processing)
Surface Mount Type
–55 ℃ to +105 ℃Size code
Features
SpecificationsC6 E7 F8
SVPA series
Nominal cap.range
Marking
Capacitance changeDissipation factor (tanδ)
DC leakage current
Dissipation factor (tan δ) Please see the attached characteristics listPlease see the attached characteristics list
±20 % (120 Hz / +20 ℃)
+105 ℃ 2000 h, rated voltage applied Within ±20 % of the initial value ≦ 150 % of the initial limit Within the initial limit
Dimensions (not to scale)
Endurance
Damp heat(Steady state)
DC leakage currentCapacitance tolerance
B6 5.0 5.9 5.3
7.9 10.38.0 6.9 8.36.3 5.9 6.6
2.5 V to 20 V 2.5 V to 16 V10 μF to 82 μF 22 μF to 180 μF 47 μF to 330 μF 180 μF to 820 μF
L R
0.2 max
φD CPH
W⊖
⊕
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current (100 kHz / +105 °C)*2: ESR(100 kHz / +20 ℃)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
C6 10SVPA68MAA 1000 10SVPA150MAA 1000
Specifications
Min.Packaging
Q'ty(pcs)
Part number
Standard(Reel size : φ380)
1970 3000.12300.1219
2R5SVPA82MAA 1500 2R5SVPA180MAA 1000 2R5SVPA330MAA 1000 2R5SVPA820M 500 4SVPA68MAA
20SVPA10M 1500 20SVPA22M 1000 20SVPA47M 1000
10SVPA330M 500
C616SVPA39MAA 1000 16SVPA39MAAY 1000 16SVPA82MAA 1000
0.120.12
2.5
820
4.0
68 150
16SVPA180M 500 82 8.0 6.9 E7 2760 262
4SVPA680M 500 6SVPA47MAA 1500 6SVPA120MAA 1000 6SVPA220MAA 1000 6SVPA470M 500
220
330 8.0 6.9 E7
25706.3
0.12 5442010.0 7.9 F8 4130
3370 5000.1220
5.9 C6
4240 5005.0 5.9 B6 1500
4SVPA150MAA 1000 4SVPA270MAA 1000 8.0 6.9 E7 3220 500
0.120.12
3002222
6.3 5.9 C6 2570
47 8.0 6.9 E7 2630 188
100 kHz ≦ f < 500 kHzCoefficient 0.05 0.3 0.7 1
Frequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz
6.3 5.9 2460 3002430
22 6.3 5.9 C6 2040 8810 5.0 5.9 B6 1700 80
180 10.0 7.9 F8 3430 576
6.3 5.9 2040 3000.1210.0 6600.1224
357.9 3770
5000.120.12 300
2222
150 8.0 6.9 2760 50068 6.3 5.9 3000.12
0.123030
2200
8.0 6.9 E7 3220
LC*4
(μA)ESR*2
(mΩ max.)
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
300180 6.3 5.9 C6 2690 300
0.120.12
5.0 5.9 B6 1970 3020
10.0 7.9 F8
470
SVPA seriesCharacteristics list
0.12
294035
Frequency correction factor for ripple current
0.120.120.12
680
120
330
33
Ratedvoltage
(V)
Ratedcapacitance
(±20 %)(μF)
Case size
Sizecode
82
(mm)
φD LRipple
current*1
(mA rms)tan δ*3
270
6.3
10 E7F8
1639
20
10.0 7.9 F8 4130 5920.1220
47 5.0 5.9 B6 1970 3000.1230
Conductive Polymer AluminumSolid Capacitors
● Low profile(Height 5 mm max.)● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.
*1: Ripple current(100 kHz / +105 ℃) *2: ESR(100 kHz to 300 kHz / +20 ℃*3: tan δ (120 Hz / +20 ℃) *4: After 2 minutes◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
2.5
C54.0 100 6.3 82 1016 33 6.3 4.920 C55
6.3 4.9
22 6.3 5.4
Surface Mount Type
Endurance
Dissipation factor (tan δ)DC leakage current
6.6
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.01-Nov-15Should a safety concern arise regarding this product, please be sure to contact us immediately.
H±0.2W±0.2+0.1-0.4LφD±0.5Size
code P±0.2RC±0.22.12.1
Damp heat(Steady state)
Size code
Features
Specifications
Rated voltage rangeCategory temp. range –55 ℃ to +105 ℃
C5 C55
2.5 V to 20 V 20 V
SVPB series
Capacitance toleranceNominal cap.range
Dissipation factor (tanδ)DC leakage current
±20 % (120 Hz / +20 ℃)
+105 ℃ 5000 h, rated voltage applied
≦ 150 % of the initial limit Within the initial limit
Capacitance change Within ±20 % of the initial value
Please see the attached characteristics listPlease see the attached characteristics list
15 μF to 120 μF 22 μF
Dimensions (not to scale)
Characteristics list
≦ 150 % of the initial limit Within the initial limit (after voltage processing)
Marking
Capacitance changeDissipation factor (tanδ)
DC leakage current
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltage Within ±20 % of the initial value
6.66.36.3 7.3
7.30.6 to 0.80.6 to 0.8
6.66.6
5.44.9
C55C5
(mm)
φD LRipple
current*1
(mA rms)
ESR*2
(mΩ max.)tan δ*3 LC*4
(μA)
Ratedvoltage
(V)
Ratedcapacitance
(±20 %)(μF)
Case size
Sizecode
Specifications Standard(Reel size : φ380)
Part number
Min.Packaging
Q'ty(pcs)
2R5SVPB120M 4SVPB100M 6SVPB82M
20SVPB15M 88 2000
2000
1670 1670 40
45 0.12 120
0.12 160 40 0.12 207
1670 40 0.1256 6.3 4.9 1670 40 0.12 224 10SVPB56M 1300
Frequency correction factor for ripple current
Coefficient 0.05 0.3 0.7 1Frequency(f) 120 Hz ≦ f < 1 kHz
16SVPB33M 1300 6.3 4.9
211
1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz 100 kHz ≦ f < 500 kHz
15 35 0.12 20SVPB22M
1300 1300 1300
1000 1300
6.3 4.940 0.12 120 120 6.3 4.9 1670
L R
0.2 max.
φD CPH
W⊖
⊕
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
Conductive Polymer AluminumSolid Capacitors
● Low ESR (9 mΩ max.)● Large capacitance (2700 μF max.)● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.
Endurance
Damp heat(Steady state)
DC leakage currentCapacitance tolerance
12.6 10.38.0 11.9 8.3
Surface Mount Type
–55 ℃ to +105 ℃Size code
Features
Specifications
Nominal cap.range
Marking
Capacitance changeDissipation factor (tanδ)
DC leakage current
Dissipation factor (tan δ) Please see the attached characteristics listPlease see the attached characteristics list
±20 % (120 Hz / +20 ℃)
+105 ℃ 2000 h, rated voltage applied Within ±20 % of the initial value ≦ 150 % of the initial limit Within the initial limit
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltageCapacitance change Within ±20 % of the initial value
Dissipation factor (tanδ) ≦ 150 % of the initial limitDC leakage current Within the initial limit (after voltage processing)
B6 5.0 5.9 5.3
Dimensions (not to scale)
06-Feb-17Should a safety concern arise regarding this product, please be sure to contact us immediately.
F12 10.0 10.3 11.0 0.8 to 1.0
7.3 0.6 to 0.8 2.1
3.26.9
8.3
6.6
9.0 0.8 to 1.0
6.3 5.9 6.68.3 8.3 9.0
P±0.2code -0.4Size φD±0.5 L +0.1 W±0.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
0.6 to 0.8 3.2
1.4
4.6
E7 8.0
5.3 6.0 0.6 to 0.8
H±0.2 C±0.2 R
E12
C6
SVPC series
B6 C6 E7 E12 F12
2.5 V to 16 V 2.5 V39 μF to 180 μF 68 μF to 560 μF 120 μF to 680 μF 270 μF to 1500 μF 2700 μF
Rated voltage rangeCategory temp. range
L R
0.2 max
φD CPH
W⊖
⊕
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current (100 kHz / +105 °C) *2: tan δ (120 Hz / +20 ℃) *3: After 2 minutes◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Should a safety concern arise regarding this product, please be sure to contact us immediately. 06-Feb-17Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
SVPC seriesCharacteristics list
Frequency correction factor for ripple current
Ratedvoltage
(V)
1000 2R5SVPC680M 1000 2R5SVPC820M 400 2R5SVPC1500M
100 kHz ≦ f < 500 kHzCoefficient 0.05 0.3 0.7 1
Frequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz
300 2R5SVPC180MV 1500 2410 25 22 0.12 300
5.0 5.96.3 5.9
C66.3 5.9 3160 15 13 0.12 300 2R5SVPC390M 1000 2R5SVPC390MV 1000
300 2R5SVPC180M 1500 5.0 5.9 2200 24 20 0.12 300 2R5SVPC180MY 1500
2.5
180 5.0 5.9
B61970 30 26 0.12
2800 19 16 0.12
390
560 6.3 5.9 3500 16 14 0.12
820 8.0 11.90.15 750
300 2R5SVPC560M680 8.0 6.9 E7 3370 20 17 0.12 500
400 2700 10.0 12.6 F12 5070 12 10 0.15 1350 2R5SVPC2700M 400
E12 5380 9 8 0.15 500 1500 8.0 11.9 5150 10 9
4.0
150 5.0 5.9
B61970 30 26 0.12
5.0 5.9 2730 20 17 0.12
5.9 3160 15 13 0.12
1200 8.0 11.9 4700
300 4SVPC150M 1500 5.0 5.9 2240 23 20 0.12 300 4SVPC150MY 1500
300 4SVPC150MV 1500
330 6.3 5.9
C62320 27 23 0.12 300 4SVPC330M 1000
6.3 5.9 2630 21 18 0.12 300 4SVPC330MY 1000 6.3 300 4SVPC330MV 1000
560 8.0 6.9 E7 3220 22 19 0.12 500 4SVPC560M 1000 8.0 11.9
E125380 9 8 0.15 500 4SVPC560MX 400
12 10 0.15 960 4SVPC1200M 400 1500 8.0 11.9 4700 12 10 0.15 1200 4SVPC1500M 400
6.3
100 5.0 5.9B6
1970 30 26 0.12
120 5.0 5.9 2660 21 18 0.12
6.3 5.9 3390 17 15 0.12
820 8.0
300 6SVPC100M 1500 5.0 5.9 2150 25 21 0.12 300 6SVPC100MY 1500
300 6SVPC120MV 1500
220 6.3 5.9C6
2320 27 23 0.12 300 6SVPC220M 1000 6.3 5.9 3160 15 13 0.12 300 6SVPC220MV 1000
330 415 6SVPC330M 1000 390 8.0 6.9 E7 3220 22 19 0.12 491 6SVPC390M 1000
11.9 E12 4700 12 10 0.15 1033 6SVPC820M 400
10
68 5.0 5.9 B6 1970 30 26 0.12
120 6.3 5.9 C6 2320 27 23 0.12
270 8.0 6.9 E7 3220 22 19
300 10SVPC68M 1500 5.0 5.9 2540 23 20 0.12 300 10SVPC68MV 1500
300 10SVPC120M 1000 6.3 5.9 2600 22 19 0.12 300 10SVPC120MV 1000
0.12 500 10SVPC270M 1000 330 8.0 6.9 3460 19 17 0.12 660 10SVPC330M 1000
16
39 5.0 5.9 B6 1820 35 30 0.12
68 6.3 5.9C6
2200 30 26 0.12
100 6.3 5.9 2490 24 23 0.12
300 16SVPC39M 1500 5.0 5.9 2350 27 23 0.12 300 16SVPC39MV 1500
500 16SVPC150M 1000
300 16SVPC68M 1000 6.3 5.9 2440 25 22 0.12 300 16SVPC68MV 1000
14 0.15 864
300 16SVPC100M 1000 120 8.0 6.9 E7 2900 27 23 0.12 500 16SVPC120M 1000 150 8.0 6.9 3220 22 21 0.12
16SVPC270M 400
Min.Packaging
Q'ty(pcs)
Part number
Standard(Reel size : φ380)
LC*3
(μA)tan δ*2
Ratedcapacitance(±20 %)
(μF) φD L
(mm)Case size
Sizecode
Specifications
Ripplecurrent*1
(mA rms)
ESR (mΩ max.)
100 kHz/ 20 ℃
300 kHz/ 20 ℃
270 8.0 11.9 E12 4070 16
Conductive Polymer AluminumSolid Capacitors
● 125 ℃ 2000 h● Guaranteed at 85 ℃ 85 %● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.
SVPD series
0.6 to 0.8 4.6
2.1
4.6
C6 E7 F8 E12 F12
10 μF to 56 μF 8.2 μF to 82 μF 18 μF to 39 μF 22 μF to 47 μF 47 μF to 82 μF
F8 10.0
6.6 7.3 0.6 to 0.8
10 V to 25 V 16 V to 35 V 25 V to 35 V
H±0.2 C±0.2 R P±0.2code -0.4Size φD±0.5 L +0.1 W±0.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.01-Nov-15Should a safety concern arise regarding this product, please be sure to contact us immediately.
F12 10.0 10.3 11.0 0.8 to 1.1
9.0 0.6 to 0.8 3.2
3.27.9
8.3
8.3
9.0 0.8 to 1.1
8.0 6.9 8.310.3 10.3 11.0
Rated voltage rangeCategory temp. range
E12
E7
+85 ℃, 80 % to 90 %, 1000 h, No-applied voltageCapacitance change Within ±20 % of the initial value
Dissipation factor (tanδ) ≦ 200 % of the initial limitDC leakage current Within the initial limit (after voltage processing)
C6 6.3 5.9 6.6
12.6 10.38.0 11.9 8.3
Surface Mount Type
–55 ℃ to +125 ℃Size code
Features
Specifications
Nominal cap.range
Marking
Capacitance changeDissipation factor (tanδ)
DC leakage current
Dissipation factor (tan δ) Please see the attached characteristics listPlease see the attached characteristics list
±20 % (120 Hz / +20 ℃)
+125 ℃ 2000 h, rated voltage applied Within ±20 % of the initial value ≦ 200 % of the initial limit Within the initial limit
Dimensions (not to scale)
Endurance
Damp heat(Steady state)
DC leakage currentCapacitance tolerance
L R
0.2 max
φD CPH
W⊖
⊕
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current (100 kHz / +105 ℃ < Tx ≦ +125 ℃), Allowable ripple current (100 kHz / Tx ≦ +105 ℃)*2: ESR (100 kHz to 300 kHz / +20 °C)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
35
E7F8
47 F12
ESR(mΩ max.)
Allowableripple
current*1
(mA rms)
10 56 C616 82 E7
25
10 C622 E739 F8
E12
400 1300 70
Min.Packaging
Q'ty(pcs)
Part number
Standard(Reel size : φ380)
LC*3
(μA)tan δ*2
Ratedcapacitance(±20 %)
(μF) φD L
(mm)Case size
Sizecode
Specifications
Ripplecurrent*1
(mA rms)
329 35SVPD47M 400 10.0 12.6 1150 3650 30 0.12
500 22 8.0 11.9 E12 700 2300 50 0.12 154 35SVPD22M 400
0.10 57 18 10.0 7.9 550 1800 60 0.10 126
8.2 8.0 6.9
235 25SVPD47M82 10.0 12.6 F12 1202 3800 28 0.12 410 47 8.0 11.9 943 2980 30 0.12
112 10SVPD56M 1000 8.0 6.9 670 2120 40 0.12 262 16SVPD82M 1000 6.3 5.9 538 1700 45 0.12
50 25SVPD10M 1000 580 1835 48 0.10 110
6.3 5.98.0 6.9
474 1500 65 0.10
10.0 7.9 664 2100 45 0.10 195 25SVPD22M 1000 25SVPD39M 500
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
SVPD seriesCharacteristics list
Frequency correction factor for ripple current
Ratedvoltage
(V)
400 25SVPD82M 400 35SVPD8R2M 1000 35SVPD18M
100 kHz ≦ f < 500 kHzCoefficient 0.05 0.3 0.7 1
Frequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz
Conductive Polymer AluminumSolid Capacitors
● Super low ESR (8 mΩ max.)● Large capacitance (1200 μF max.)● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.
Surface Mount Type
–55 ℃ to +105 ℃Size code
Features
SpecificationsC6 C10 F12
SVPE series
Marking
Capacitance changeDissipation factor (tanδ)
DC leakage current
Dissipation factor (tan δ) Please see the attached characteristics list +105 ℃ 2000 h, rated voltage applied
Within ±20 % of the initial value ≦ 150 % of the initial limit Within the initial limit
Dimensions (not to scale)
Endurance
Damp heat(Steady state)
DC leakage current Within the initial limit (after voltage processing)
DC leakage currentCapacitance tolerance
Rated voltage rangeCategory temp. range
B6
2.5 V to 6.3 VNominal cap.range
Please see the attached characteristics list±20 % (120 Hz / +20 ℃)
150 μF to 390 μF
B6 5.0 5.9 5.3
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltageCapacitance change Within ±20 % of the initial value
Dissipation factor (tanδ) ≦ 150 % of the initial limit
0.6 to 0.8
01-Nov-15Should a safety concern arise regarding this product, please be sure to contact us immediately.
F12 10.0 10.3 11.0 0.8 to 1.1
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
12.6 10.3 4.6
6.3 5.9 6.66.3 9.9 6.6
1.45.3 6.0
6.66.6
7.3 0.6 to 0.87.3 0.6 to 0.8
+0.1 W±0.2 H±0.2 C±0.2 R
2.12.1
2.5 V to 10 V 2.0 V to 16 V 16 V220 μF to 390 μF 180 μF to 1200 μF 470 μF
C10C6
P±0.2code -0.4Size φD±0.5 L
L R
0.2 max
φD CPH
W⊖
⊕
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current (100 kHz / +105 °C)*2: tan δ (120 Hz / +20 ℃)*3: After 2 minutes◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
6.3B6
220 C6
10 220
16180 C10470 F12
6.3 5.9
180 5.0 5.9150 5.0 5.9
10.0 12.66.3 9.9
2.0 1200 C10
2.5
270
B6330
390 C6
5.0 5.96.3 5.9
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
SVPE seriesCharacteristics list
Frequency correction factor for ripple current
Ratedvoltage
(V)
1000 6SVPE150M 1500 6SVPE180M 1500 6SVPE220MW
100 kHz ≦ f < 500 kHzCoefficient 0.05 0.3 0.7 1
Frequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz
500 2R5SVPE330M 1500 3860 10 9 0.12 500
5.0 5.95.0 5.9
3150 15 13 0.12
3860 10 9 0.12 700 2R5SVPE330MY 1500 2R5SVPE390MX 1500
500 2SVPE1200M 500 5.0 5.9 3860 10 9 0.12 500 2R5SVPE270M 1500 6.3 9.9 5230 8 8 0.12
500
3150 15 13 0.12 500
2R5SVPE390M3520 12 10 0.12 500 3900 10 9 0.12
1500 6.3 5.9 3900 10 9 0.12 500 6SVPE220M 1000 5.0 5.9 3150 15 13 0.12 500
16SVPE180M 500 2700 20 18 0.12
1504 16SVPE470M 400
500 10SVPE220M 1000
6100 10 9 0.124460 11 10 0.12 576
Min.Packaging
Q'ty(pcs)
Part number
Standard(Reel size : φ380)
LC*3
(μA)tan δ*2
Ratedcapacitance(±20 %)
(μF) φD L
(mm)Case size
Sizecode
Specifications
Ripplecurrent*1
(mA rms)
ESR (mΩ max.)
100 kHz/ 20 ℃
300 kHz/ 20 ℃
Conductive Polymer AluminumSolid Capacitors
● 105 ℃ 5000 h● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.
SVPS seriesSurface Mount Type
–55 ℃ to +105 ℃Size code
Features
Specifications
Nominal cap.range
Marking
Capacitance changeDissipation factor (tanδ)
DC leakage current
Dissipation factor (tan δ) Please see the attached characteristics listPlease see the attached characteristics list
±20 % (120 Hz / +20 ℃)
+105 ℃ 5000 h, rated voltage applied (25 V → 20 V applied) Within ±20 % of the initial value ≦ 150 % of the initial limit Within the initial limit
Dimensions (not to scale)
100 μF to 680 μF
Endurance
Damp heat(Steady state)
DC leakage current
Rated voltage rangeCategory temp. range
E7
B6
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltageCapacitance change Within ±20 % of the initial value
Dissipation factor (tanδ) ≦ 150 % of the initial limitDC leakage current Within the initial limit (after voltage processing)
Capacitance tolerance
A5 4.0 5.4 4.3
7.9 10.38.0 6.9
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.01-Nov-15Should a safety concern arise regarding this product, please be sure to contact us immediately.
F8 10.0 10.3 11.0 0.6 to 0.8
6.0 0.6 to 0.8 1.4
3.2C6
8.3 8.3
5.35.0 5.9 5.32.16.3 5.9 6.6 7.3
R P±0.2code -0.4Size φD±0.5 L +0.1 W±0.2
1.0
4.6
A5 B6 C6 E7 F8
4.0 V to 10 V 4.0 V to 16 V 4.0 V to 20 V 4.0 V to 25 V 4.0 V to 16 V10 μF to 33 μF 22 μF to 68 μF 22 μF to 150 μF 10 μF to 270 μF
4.3 5.0 0.6 to 0.8
9.0 0.6 to 0.80.6 to 0.8
H±0.2 C±0.2
6.6
L R
0.2 max
φD CPH
W⊖
⊕
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current (100 kHz / +105 ℃): The surface temperature of aluminum case top must not exceed 105 ℃. A rise in temperature due to self-heating by ripple current should be factored in.
*2: ESR (100 kHz to 300 kHz / +20 ℃)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
47
C6E7
4.0 5.4 740 75 0.10200
220 8.0 6.9 E7 3220 500 0.1222
15
2760
50 0.100.12 592
SVPS seriesCharacteristics list
0.12
243035
Frequency correction factor for ripple current
0.120.120.12
120
470
29
Ratedvoltage
(V)
Ratedcapacitance
(±20 %)(μF)
Case size
Sizecode
33
(mm)
φD LRipple
current*1
(mA rms)tan δ*3
700
LC*4
(μA)ESR*2
(mΩ max.)
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
66 68 5.0 5.9 B6 1970 300
0.150.12
4.0 5.4 A5 740 20030
8.0 6.9 E7
6.9
22020
68 6.3 5.9 2200 300 33 5.0 5.9 165 0.12
0.127030
1100
4.0 5.410
B6
7.9 F8
39 6.3 5.9 C6 2460 300
10.0 7.9 3020 300 0.1230
22 5.0 5.9 B6 1060 176 10.0 7.9 3770 660 24
10.0 7.9 2670 320 82 8.0 6.9 E7 2760 262
100 kHz ≦ f < 500 kHzCoefficient 0.05 0.3 0.7 1
Frequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz
6SVPS22M 2000 6SVPS47M 1500 5.0 5.9 B6 1970 300
0.120.12
69.3 20030
4.0 5.4 A5 740
4SVPS33M 2000 4SVPS68M 1500 4SVPS150M 1000 4SVPS270M 1000 4SVPS680M 500
3220 500 10.0 7.9 F8 4130 544 0.1220
0.12224.0
6.3
10
A5
150
330
Specifications
270 680 22
150 6.3 5.9 C6
4130 10.0
0.12 300 226.3 5.9 C6
0.1222
Min.Packaging
Q'ty(pcs)
Part number
Standard(Reel size : φ380)
10SVPS150MX 1000
F810SVPS150M 500 10SVPS330M 500 0.12
6SVPS120M 1000 6SVPS220M 1000 6SVPS470M 500 10SVPS10M 2000 10SVPS15M 2000
2570
2570 300
16SVPS82M 1000 16SVPS100M 500 16SVPS180M 500
60 0.10 88 20SVPS22M576
10SVPS33M 1500 10SVPS68M 1000
16SVPS22M 1500 0.1016SVPS39M 1000
0.12 500 30
25 10 8.0 6.9 1500 60 0.10 125
8.0
180 10.0 7.9 3430
16
F8
2022 6.3 5.9 C6 1450
90
100
25SVPS10M
1000 47 8.0 6.9
E71890 45 0.12 188 20SVPS47M 1000
1000
Conductive Polymer AluminumSolid Capacitors
● 125 ℃ 1000 h● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.2.16.6 7.3 0.6 to 0.8
H±0.2 C±0.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.01-Nov-15Should a safety concern arise regarding this product, please be sure to contact us immediately.
9.0 0.6 to 0.8 3.28.38.0 6.9 8.3E7
P±0.2
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltageCapacitance change Within ±20 % of the initial value
Dissipation factor (tanδ) ≦ 200 % of the initial limit
code -0.4Size φD±0.5 L +0.1 W±0.2C6 6.3 5.9 6.6
R
DC leakage currentCapacitance tolerance
Rated voltage rangeCategory temp. range
Nominal cap.range
Please see the attached characteristics list±20 % (120 Hz / +20 ℃)
4.0 V to 20 V 6.3 V to 20 V22 μF to 150 μF 47 μF to 220 μF
SVQP series
Marking
Capacitance changeDissipation factor (tanδ)
DC leakage current
Dissipation factor (tan δ) Please see the attached characteristics list +125 ℃ 1000 h, rated voltage applied
Within ±20 % of the initial value ≦ 200 % of the initial limit Within the initial limit
Dimensions (not to scale)
Endurance
Damp heat(Steady state)
DC leakage current Within the initial limit (after voltage processing)
Surface Mount Type
–55 ℃ to +125 ℃Size code
Features
SpecificationsC6 E7
L R
0.2 max
φD CPH
W⊖
⊕
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current (100 kHz / +105 ℃ < Tx ≦ +125 ℃), Allowable ripple current (100 kHz / Tx ≦ +105 ℃)*2: ESR (100 kHz to 300 kHz / +20 °C)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
47 E7
ESR(mΩ max.)
Allowableripple
current*1
(mA rms)
4.0 150 82
100 220 E756 C6
512 1620 50
6.9 810 2560 35
6.3 5.98.0 6.9
572
Min.Packaging
Q'ty(pcs)
Part number
Standard(Reel size : φ380)
LC*3
(μA)tan δ*2
Ratedcapacitance(±20 %)
(μF) φD L
(mm)Case size
Sizecode
Specifications
Ripplecurrent*1
(mA rms)
470 20SVQP47M 10008.3 6.9 598 1890 45 0.12
100022 6.3 5.9 C6 459 1450 60 0.10 220 20SVQP22M 1000
E782 8.0 6.9 670 2120 40 0.12 65639 6.3 5.9 C6
6.3 5.9 572 1810 40 0.12
0.12
0.10 312
6.3 5.9 538 1700 45 0.12 258 6SVQP82M 10001810 40 0.12
C6
6SVQP220M 100010SVQP56M 1000
315 6SVQP100M 1000810 2560 35 0.12 693
300 4SVQP150M 1000
1Frequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz
6.3 5.9 538 1700 45 0.12 280600 10SVQP120M
150 8.0 6.9 810 2560 35 0.12 750120 8.0
6.3
10E7
16
20
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
SVQP seriesCharacteristics list
Frequency correction factor for ripple current
Ratedvoltage
(V)
100010SVQP150M 100016SVQP39M 100016SVQP82M
100 kHz ≦ f < 500 kHzCoefficient 0.05 0.3 0.7
Conductive Polymer AluminumSolid Capacitors
● Standard● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.
SVP series
3.3 to 33 10 to 68 22 to 220 33 to 330 56 to 680 100 to 680 150 to 1500
E7 8.0 6.9 8.3 8.3 9.0
R P±0.2code -0.4Size φD±0.5 L +0.1 W±0.2
1.04.3
A5 B6 C6 E7 F8 E12 F12
4.0 to 16 4.0 to 20 2.5 to 20 4.0 to 20 2.5 to 20
Surface Mount Type
–55 ℃ to +105 ℃Size code
Features
Specifications
Nominal cap.range (μF)
Marking
Capacitance changeDissipation factor (tanδ)
DC leakage current
Dissipation factor (tan δ) Please see the attached characteristics listPlease see the attached characteristics list
±20 % (120 Hz / +20 ℃)
+105 ℃ 2000 h, rated voltage applied Within ±20 % of the initial value ≦ 150 % of the initial limit Within the initial limit
Dimensions (not to scale)
Endurance
Damp heat(Steady state)
DC leakage current
Rated voltage range (V)Category temp. range
E12
B6
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltageCapacitance change Within ±20 % of the initial value
Dissipation factor (tanδ) ≦ 150 % of the initial limitDC leakage current Within the initial limit (after voltage processing)
Capacitance tolerance
A5 4.0 5.4 4.3
12.6 10.38.0 11.9
7.3
01-Nov-15Should a safety concern arise regarding this product, please be sure to contact us immediately.
F12 10.0 10.3 11.0
0.6 to 0.8
6.0 0.6 to 0.8 1.4
3.2
C6
8.3 8.3
5.35.0 5.9 5.32.16.3 5.9 6.6
0.8 to 1.1
5.0 0.6 to 0.8
9.0
0.6 to 0.80.6 to 0.8
H±0.2 C±0.2
6.6
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
F8 10.0 7.9 10.3 10.3 11.03.24.6
0.8 to 1.14.6
L R
0.2 max
φD CPH
W⊖
⊕
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current (100 kHz / +105 ℃) *2: ESR (100 kHz to 300 kHz/+20 ℃) *3: tan δ (120 Hz / +20 ℃) *4: After 2 minutes◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
400 150 10.0 12.6 F12 4320 20 0.15 600 20SVP150M 400 100 8.0 11.9 E12 3320 24 0.15 400 20SVP100M
20SVP47M 1000 56 10.0 7.9 F8 2400 40 0.12 224 20SVP56M 500 68 10.0 7.9 2400 40 0.12 272 20SVP68M 500
5.9 1450 60 0.10 108 20SVP27M 1000 33 8.0 6.9 E7 1890 45 0.12 132 20SVP33M 1000 47 8.0 6.9 1890 45 0.12 188
400
20
10 5.0 5.9 B6 1020 120 0.10 100 20SVP10M 1500 22 6.3 5.9 C6 1450 60 0.10 88 20SVP22M 1000 27 6.3
330 10.0 12.6 F12 4720 16 0.15 792 16SVP330M
500 8.0 11.9 E12 3640 20 0.15 576 16SVP180M 400
0.12 576 16SVP180MX
500 150 10.0 7.9 3020 30 0.12 480 16SVP150M 500 100 10.0 7.9
F82670 35 0.12 320 16SVP100M
180 10.0 7.9 3020 30
1000 82 8.0 6.9 2120 40 0.12 262 16SVP82M 1000 56 8.0 6.9 E7 1890 45 0.12 179 16SVP56M
5.9 1060 90 0.10 176 16SVP22M 1500 39 6.3 5.9 C6 1620 50 0.10 125 16SVP39M 1000
400
16
3.3 4.0 5.4 A5 660 260 0.07 26.4 16SVP3R3M 2000 15 5.0 5.9 B6 1020 120 0.10 120 16SVP15M 1500 22 5.0
560 10.0 12.6 F12 5230 13 0.15 840 10SVP560M
3700 25 0.12 540 10SVP270M 500 330 10.0 7.9 3700 25 0.12 660 10SVP330MX 500
8.0 11.9 E12 3950 17 0.15 660 10SVP330M 400
240 10SVP120M 1000 150 8.0 6.9 2560 35 0.12 300 10SVP150MX 1000
10.0 7.9F8
3020 30 0.12 300 10SVP150M 500 270 10.0 7.9
1500 10SVP47M 1000
56 6.3 5.9 1700 45 0.12 112 10SVP56M 1000
33 5.0 5.9 B6 1100 70 0.12 165 10SVP33M
10
A515 4.0 5.4 740 200 0.10 75
47 6.3 5.9 C6 1620 50 0.12 94
120 8.0 6.9 E7 2560 35 0.12
6.3
A5 6SVP22M 2000
C6100 6SVP100M 1000 120 6SVP120MV 1000 220 E7 0.12 6SVP220MX 1000
F8470 E12
F12
6.3 5.9 1700 103
2.55440 750
4.0
B6
2560 4SVP330M 1000 4SVP560M 400 4SVP680M 500
F12 4SVP1200M 400
150
10.0 12.61200
4SVP68M 1500 4SVP150MX 1000 6.3
4.0 5.4 740 69.3 0.12200
560 8.0 11.9 E12 4520 448 0.1513
22
1810
960 0.180.12 544
12 25
82
SVP seriesCharacteristics list
0.15
25 25 15
Frequency correction factor for ripple current
0.120.120.15
330
680
12
Ratedvoltage
(V)
Ratedcapacitance
(±20 %)(μF)
Case size
Sizecode
220
(mm)
φD LRipple
current*1
(mA rms)tan δ*3
5440
LC*4
(μA)ESR*2
(mΩ max.)
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
110 680 8.0 11.9 E12 4520 340
0.120.15
6.3 5.9 C6 2390 23 13
4.0 5.4 A5
5.9
47 5.0 5.9 148 0.120.12
70 45
1100 B6
330 10.0 7.9 3700 416
6.3 5.9 2780 151 0.1217
10.0 7.9 3700 277 8.0 6.9 2560 277 35
0.12
8.0 11.9 4210 592 10.0 7.9 3700 592
100 kHz ≦ f < 500 kHz
240 0.08 23.5 10SVP4R7M775
10SVP10M
2000 240 0.09 34 10SVP6R8M 2000
2000 10SVP15M 2000
Coefficient 0.05 0.3 0.7 1Frequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz
2000 4SVP39M 1500
5.9 C6 1810 120 0.120.12
136 60 40
1100 78 0.1270 0.15200
5.0 5.9 1400
Specifications
33 39 68
1500 10.0 12.6 F12
3700 10.0
0.12 264 35 8.0 6.9 E7
0.1812
7.9 F8
740 66 5.0 5.9
Min.Packaging
Q'ty(pcs)
Part number
Standard(Reel size : φ380)
6SVP470MX 500 6SVP470M 400 6SVP820M 400
6SVP47M 1500 6SVP82M 1000
6SVP220M 500 6SVP330M 500
2R5SVP220M 1000 2R5SVP680M 400 2R5SVP1500M 400 4SVP33M
0.12 126 40
10 4.0 5.4 700 220 0.10 50
6.3
820 10.0 12.6 5440 4.7 4.0 5.4 670
25
6.8 4.0 5.4 670
Conductive Polymer AluminumSolid Capacitors
● High voltage(35 V max.)● Large capacitance (1000 μF max.)● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size. *1: 32SEF68M 0.6±0.05
E12 8.0F13 10.0 13.0
2.5 0.5
12.0 3.5 0.6
6.0
24-Jan-20Should a safety concern arise regarding this product, please be sure to contact us immediately.
Rated voltage rangeCategory temp. range
16 V to 35 V–55 ℃ to +125 ℃
Capacitance toleranceNominal cap.range
Dissipation factor (tanδ)DC leakage current
±20 % (120 Hz / +20 ℃)
+125 ℃ 1000 h, rated voltage applied
≦ 200 % of the initial limit Within the initial limit
Capacitance changeEndurance
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Please see the attached characteristics listPlease see the attached characteristics list
Damp heat(Steady state)
Marking
≦ 150 % of the initial limit Within the initial limit (after voltage processing)
Capacitance changeDissipation factor (tanδ)
DC leakage current
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltage Within ±20 % of the initial value
Dissipation factor (tan δ)DC leakage current
5.0 0.6
Size code
Features
SpecificationsC6
SEF series
E7 E12
Within ±20 % of the initial value
F±0.5 φd±0.05
Dimensions (not to scale)
F13
Radial Lead Type
22 μF to 180 μF 39 μF to 270 μF 82 μF to 560 μF 120 μF to 1000 μF
3.5 0.5*1E7 8.0
Size code φD±0.5 L max.
7.0C6 6.3
⊕
⊖15 min. 4 min.
19 min.L max.
φD F
φd
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current(100 kHz / +105 ℃ < Tx ≦ +125 ℃) / Allowable ripple current(100 kHz / Tx ≦ +105 ℃)*2: ESR(100 kHz to 300 kHz / +20 ℃)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”.
32SEF68M32 68 8.0 7.0 E7 1010 3200 25 0.10
Sizecode
Case size(mm)
82 120
Characteristics list
E12F13
12.013.0
8.010.0
6.07.0
Ratedvoltage
(V)
1000 10.0 13.0 F13
20
120 6.3 6.0 C6
0.05
35
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 24-Jan-20
100 kHz ≦ f < 500 kHz1
10 kHz ≦ f < 100 kHz0.7
1 kHz ≦ f < 10 kHz0.3
120 Hz ≦ f < 1 kHz
6.38.0
35SEF22M273 35SEF39M880 0.12302800
16SEF180M864
16SEF560M1700 5400 12 0.12 3200 16SEF1000M
16SEF270M0.12
Specifications
Ripplecurrent*1
(mA rms)
Allowableripple
current*1
(mA rms)
ESR*2
(mΩ max.)tan δ*3 LC*4
(μA)
820 2600 35 0.12 154
576
1010 3200
435
SEF series
35SEF82M18 0.12 840 35SEF120M20 0.12 574
0.127.0 E7 1040 3300 22 0.12
560 8.0 12.0 E12 1560 4950 14 1792
Frequency(f)Coefficient
Ratedcapacitance
(±20 %)(μF)
22 39
Frequency correction factor for ripple current
1260 1390
C6
LφD
40004400
E7
16
180 6.3 6.0 C6 1040 3300 22270 8.0
480 20SEF120M180 8.0 7.0 E7 1010 3200 25 0.12 720 20SEF180M
25 0.12
1560 20SEF390M560 10.0 13.0 F13 1700 5400 12 0.12 2240 20SEF560M390 8.0 12.0 E12 1560 4950 14 0.12
25SEF82M25
56 6.3 6.0 C6 880 2800 30 0.12
180 8.0 12.0 E12 1470 4650 16 0.12
Part number
900 25SEF180M330 10.0 13.0 F13 1580 5000 14 0.12 1650 25SEF330M
280 25SEF56M82 8.0 7.0 E7 940 3000 28 0.12 410
Click here for part number list of lead terminal cutting and lead terminal taping
Conductive Polymer AluminumSolid Capacitors
● High voltage(50 V max.)● 125 ℃ 1000 h● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.
Radial Lead Type
22 μF to 82 μF 33 μF to 120 μF 68 μF to 270 μF 120 μF to 470 μF
3.5 0.5E7 8.0
Size code φD±0.5 L max.
7.0C6 6.3
E7 E12
Within ±20 % of the initial value
F±0.5 φd±0.05
Dimensions (not to scale)
F13Size code
Features
SpecificationsC6
SEK series
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Please see the attached characteristics listPlease see the attached characteristics list
Damp heat(Steady state)
Marking
≦ 150 % of the initial limit Within the initial limit (after voltage processing)
Capacitance changeDissipation factor (tanδ)
DC leakage current
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltage Within ±20 % of the initial value
Dissipation factor (tan δ)DC leakage current
5.0 0.6
30-Oct-17Should a safety concern arise regarding this product, please be sure to contact us immediately.
Rated voltage rangeCategory temp. range
25 V to 50 V–55 ℃ to +125 ℃
Capacitance toleranceNominal cap.range
Dissipation factor (tanδ)DC leakage current
±20 % (120 Hz / +20 ℃)
+125 ℃ 1000 h, rated voltage applied
≦ 200 % of the initial limit Within the initial limit
Capacitance changeEndurance
2.5 0.5
12.0 3.5 0.6
6.0
E12 8.0F13 10.0 13.0
⊕
⊖15 min. 4 min.
19 min.L max.
φD F
φd
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current(100 kHz / +105 ℃ < Tx ≦ +125 ℃) / Allowable ripple current(100 kHz / Tx ≦ +105 ℃)*2: ESR(100 kHz to 300 kHz / +20 ℃)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”.
SEK series
220 50SEK22M1390
850 1200 1350
35
574 35SEK82M0.12 1260 35SEK180M
18 0.12 2310 35SEK330M
4300
253060 0.12
4400
2700
960
25SEK270M14 0.12 2350 25SEK470M27 0.12 329 35SEK47M
16 0.12 1350
Frequency(f)Coefficient
Ratedcapacitance
(±20 %)(μF)
82 120
47 82
180 330
68 120
Frequency correction factor for ripple current
1470 1590 930
C6
LφD
465050002950
E76.38.0
25SEK82M600 25SEK120M
Specifications
Ripplecurrent*1
(mA rms)
Allowableripple
current*1
(mA rms)
ESR*2
(mΩ max.)tan δ*3 LC*4
(μA)
960 3060 25 0.121010
410 0.12243200
Part number
0.05
E12F13C6E7E12 0.12
820 2600 35 0.12
2040001260
6.0
380050
25
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Oct-17
100 kHz ≦ f < 500 kHz1
330 50SEK33M680 50SEK68M
1200 50SEK120M
0.1225
7.012.0
20 0.12
10 kHz ≦ f < 100 kHz0.7
1 kHz ≦ f < 10 kHz0.3
120 Hz ≦ f < 1 kHz
Sizecode
Case size(mm)
8.08.0
270 470
22 33
7.0
Characteristics list
35
13.0
E12F13
12.013.0
8.010.0
10.0
C6E7
6.38.08.010.0
F13
6.3
6.07.0
6.0
Ratedvoltage
(V)
12.013.0
Click here for part number list of lead terminal cutting and lead terminal taping
Conductive Polymer AluminumSolid Capacitors
● High ripple current (6100 mA rms max.)● RoHS compliance, Halogen free
・E13 size ・C9、C10、E9 size
C9、C10、E9 size flat rubber is used.Unit:mm
* Depends on the case size.
*1: Ripple curren(100 kHz / +105 ℃) *2: ESR(100 kHz / +20 ℃) *3: tan δ (120 Hz / +20 ℃) *4: After 2 minutes◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”.
16SEPG270M
Frequency correction factor for ripple currentFrequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz 100 kHz ≦ f < 500 kHzCoefficient 0.05 0.3 0.7 1
16SEPG470M8.0 13.0 E13 6100 8 0.12 1792
(mm)
φD LRipple
current *1
(mA rms)
ESR*2
(mΩ max.)tan δ*3 LC*4
(μA)
Part number
16SEPG560M1504
16SEPG270W6.3 10.0 C10 5800 816
270 6.3 9.0 C9 5040 10 0.12 864
470 8.0 9.0 E9 5400 8 0.12560
0.12 864
C9C10E9E13
Ratedvoltage
(V)
Ratedcapacitance
(±20 %)(μF)
Case size
Sizecode
Specifications
0.60.50.60.6
2.52.53.53.58.0
≦ 200 % of the initial limit Within the initial limit
Capacitance change
Please see the attached characteristics listPlease see the attached characteristics list
16 V
Within ±20 % of the initial value
470 μF 560 μF270 μF
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.29-May-20Should a safety concern arise regarding this product, please be sure to contact us immediately.
≦ 150 % of the initial limit Within the initial limit (after voltage processing)
Capacitance changeDissipation factor (tan δ)
DC leakage current
+60 °C, 90 % to 95 %, 1000 h, No-applied voltage Within ±20 % of the initial value
φd±0.05F±0.5L max.φD±0.59.010.09.0
6.36.38.0
Dimensions (not to scale)
Size code
Characteristics list
13.0
SEPG seriesRadial Lead Type
Rated voltage rangeCategory temp. range
Endurance
Dissipation factor (tan δ)Leakage current
Damp heat(Steady State)
Marking
Capacitance toleranceRated cap. range
Dissipation factor (tan δ)
Size code
Features
SpecificationsC9 C10 E9 E13
–55 ℃ to +105 ℃
DC leakage current
±20 % (120 Hz / +20 ℃)
+105 ℃ 5000 h, rated voltage applied
Series code*
Polarity marking(–)
R. capacitance(μF)
R.voltage(V)
Lot No. ⊕⊖
15 min. 4 min.19 min.L
φD F
φd
⊕⊖
15 min. 4 min.19 min.L
φD F
φd
Click here for part number list of lead terminal cuttingand lead terminal taping
Conductive Polymer AluminumSolid Capacitors
● Super high voltage (100 V max.)● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.
18 μF to 100 μF
Marking
SXE seriesRadial Lead Type
F8 E12 F13
Capacitance toleranceDC leakage current
15 μF to 39 μF
Capacitance changeDissipation factor (tanδ)
DC leakage current
Dissipation factor (tan δ) Please see the attached characteristics list
3.5 0.610.0 13.0 5.0
Damp heat(Steady state)
Size code φD±0.5 L max. F±0.5
F13
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
φd±0.05E7 8.0 7.0 3.5 0.45F8 10.0 8.0 5.0 0.5
0.6
Within ±20 % of the initial value ≦ 200 % of the initial limit
Endurance
Dimensions (not to scale)
24-Jan-20Should a safety concern arise regarding this product, please be sure to contact us immediately.
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltageCapacitance change Within ±20 % of the initial value
Dissipation factor (tanδ) ≦ 150 % of the initial limitDC leakage current Within the initial limit (after voltage processing)
E12 8.0 12.0
15 μF to 56 μF
Within the initial limit
–55 ℃ to +125 ℃Size code
Features
Specifications
Rated voltage rangeCategory temp. range
63 V to 100 V
E7
Nominal cap.range
Please see the attached characteristics list±20 % (120 Hz / +20 ℃)
6.8 μF to 18 μF
+125 ℃ 1000 h, rated voltage applied
⊕
⊖15 min. 4 min.
19 min.L max.
φD F
φd
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current (100 kHz / +105 °C < Tx ≦ +125 °C) / Allowable ripple current (100 kHz / Tx ≦ +105 °C)*2: ESR(100 kHz to 300 kHz / +20 ℃)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”.
SXE series
690 930
1030 1030 340 780
Ripplecurrent*1
(mA rms)
Allowableripple
current*1
(mA rms)
Specifications
LC*4
(μA)tan δ*3ESR*2
(mΩ max.)
602525502525256035
0.120.120.12
29503280328011002490
630 730
0.120.120.120.120.12
980 980 340
310031001100
20802490
660 780
90 90
188 224 34
104 122 122 176 214 315 48
108 108
100SXE27M
63SXE39M63SXE39MX63SXE56M63SXE68M63SXE100M80SXE12M80SXE27M80SXE27MX80SXE33M80SXE47M80SXE56M100SXE6R8M100SXE15MX100SXE15M100SXE18M100SXE18MX100SXE22M
27 10.0 13.0 F13110 135
0.120.12
3030
30003000
940 940
100 kHz ≦ f < 500 kHzCoefficient 0.05 0.3 0.7 1
Frequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz
0.120.12
3040
10.0 13.0 F13
22 10.0 13.0 F138.0 12.0 E12
30002350
940 730
8.0 12.0 E1210.0 75
75 0.120.12
6040
20002350
56 10.0 13.0 F136.8 8.0 7.0 E7
47 10.0 13.0 F13
10.0 13.0 F13
56 8.0 12.0 E12
33 8.0 12.0 E12
8.0
63SXE18M63SXE33M
56
(mm)
φD L
10.0 8.0 F88.0 12.0 E128.0 12.0 E12
0.12
1100295029502190
340 930 930
Part number
Characteristics list
Frequency correction factor for ripple current
68
12
Ratedvoltage
(V)
Ratedcapacitance
(±20 %)(μF)
Case size
Sizecode
18
8.0 F8
8.0 F8
10.0 13.0 F13
8.0
63
8.0 7.0 E733
39
100
80 27
100
15
18
Should a safety concern arise regarding this product, please be sure to contact us immediately. 24-Jan-20Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
7.0 E7
10.0
0.120.120.12
282860
12.0 E12
132 0.120.12
5535
Click here for part number list of lead terminal cuttingand lead terminal taping
Conductive Polymer AluminumSolid Capacitors
● High voltage(35 V max.)● Large capacitance (1000 μF max.)● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.
*1: 32SEPF68M : 0.6±0.05
6.3 6.0 2.5 0.50.45
F13
Radial Lead Type
3.5 0.5*1E7 8.0
Size code φD±0.5 L max.
7.0
C55 6.3
Within ±20 % of the initial value
F±0.5 φd±0.05
Size code C55 C6 E7 E12
Features
Specifications
SEPF series
Damp heat(Steady state)
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltage
Rated voltage rangeCategory temp. range –55 ℃ to +105 ℃
Capacitance toleranceNominal cap.range
16 V to 32 V 16 V to 35 V22 μF to 150 μF 22 μF to 180 μF 39 μF to 270 μF
Marking
≦ 150 % of the initial limit Within the initial limit (after voltage processing)
Capacitance changeDissipation factor (tanδ)
DC leakage current
Within ±20 % of the initial value
Dimensions (not to scale)
82 μF to 560 μF 120 μF to 1000 μF±20 % (120 Hz / +20 ℃)
Endurance
Please see the attached characteristics listPlease see the attached characteristics list
Dissipation factor (tan δ)DC leakage current
Dissipation factor (tanδ)DC leakage current
+105 ℃ 5000 h, rated voltage applied
≦ 150 % of the initial limit Within the initial limit
Capacitance change
0.6
5.5
E12 8.0
01-Nov-15Should a safety concern arise regarding this product, please be sure to contact us immediately.
5.0 0.6F13 10.0 13.012.0 3.5
2.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
C6
⊕
⊖15 min. 4 min.
19 min.L max.
φD F
φdPolarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current(100 kHz / +105 ℃)*2: ESR(100 kHz to 300 kHz / +20 ℃)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”.
Part number
0.12 574 35SEPF82M120 10.0 13.0 F13 4400 18 0.12 840 35SEPF120M
32SEPF22M8.0 7.0 E7 3200 25 0.10 435 32SEPF68M
330 10.0
35
6.3 6.0 C6 2600 35 0.12 154 35SEPF22M39 8.0 7.0 E7 2800 30 0.12 273 35SEPF39M82 8.0 12.0 E12 4000 20
3222 6.3 5.5 C55 2400 35 0.12 140
13.0 F13 5000 14 0.12 1650 25SEPF330M
25
6.3 6.0 C6 2800 30 0.12 280 25SEPF56M8.0 7.0 E7 3000 28 0.12 410 25SEPF82M8.0 12.0 E12 4650 16 0.12 900
14 0.12 1560 20SEPF390M10.0 13.0 F13 5400 12 0.12 2240 20SEPF560M
49508.0
16SEPF150M180 6.3 6.0 C6 3300 22 0.12 576 16SEPF180M
C55 2590
720
16SEPF270M8.0 12.0 E12 4950 14 0.12 1792 16SEPF560M10.0 13.0 F13 5400 12 0.12 3200
20SEPF180M3200 25 0.12
8.0 7.0 E7 3300 22 0.12
30 0.12
864
480
120 16SEPF1000M
480 20SEPF120M180
12.0 E12
Ratedvoltage
(V)
Ratedcapacitance
(±20 %)(μF)
Case size
Sizecode
Specifications(mm)
φD LRipple
current *1
(mA rms)
ESR*2
(mΩ max.)tan δ*3 LC*4
(μA)
16
150 6.3 5.5
270
Frequency correction factor for ripple current
SEPF series
0.05
68 22
Characteristics list
560 1000
180 25SEPF180M
56 560
82
20
6.3 6.0 C6
390 8.0 7.0 E7 3200 25 0.12
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15
100 kHz ≦ f < 500 kHz1
10 kHz ≦ f < 100 kHz0.7
1 kHz ≦ f < 10 kHz0.3
120 Hz ≦ f < 1 kHzFrequency(f)Coefficient
Click here for part number list of lead terminal cuttingand lead terminal taping
Conductive Polymer AluminumSolid Capacitors
● Super low ESR (5 mΩ max.)● Large capacitance (2700 μF max.)● RoHS compliance, Halogen free
・E12, E13, F13 size
・B9, C55, C6, C9, E7, E9 size
B9, C55, C6, C9, E7, E9 size flat rubber is used.Unit:mm
* Depends on the case size.
*1: 2SEPC390M、2SEPC560M : 0.5±0.05*2: 16SEPC150MD、10SEPC270M : 0.45±0.05
SEPC seriesRadial Lead Type
Within ±20 % of the initial value
180 to 270 470 to 820 470 to 2700
Size code φD±0.5 L max. F±0.5 φd±0.05
Dissipation factor (tanδ)DC leakage current
±20 % (120 Hz / +20 ℃)
+105 ℃ 5000 h, rated voltage applied
≦ 150 % of the initial limit Within the initial limit
Capacitance change
Features
SpecificationsSize code B9 C55 C6
Category temp. range –55 ℃ to +105 ℃
Capacitance toleranceNominal cap.range (μF) 100 to 560 220 100 to 560 100 to 820 150 to 1000 180 to 1000
F13
2.5 6.3 2.5 to 16 6.3 to 16 2.5 to 16 16 2.5 to 6.3 2.5 to 16
C9 E7 E9
03-Feb-17Should a safety concern arise regarding this product, please be sure to contact us immediately.Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Endurance
Please see the attached characteristics listPlease see the attached characteristics list
Dissipation factor (tan δ)DC leakage current
Rated voltage range (V)
Damp heat(Steady state)
Marking
≦ 150 % of the initial limit Within the initial limit (after voltage processing)
Capacitance changeDissipation factor (tanδ)
DC leakage current
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltage Within ±20 % of the initial value
Dimensions (not to scale)
B9 5.0 9.0 2.0 0.6
E12 E13
C6 6.3 6.0 2.5 0.45*1C55 6.3 5.5 2.5 0.45
E7 8.0 7.0 3.5 0.6*2C9 6.3 9.0 2.5 0.6
E12 8.0 12.0 3.5 0.6E9 8.0 9.0 3.5 0.6
F13 10.0 13.0 5.0 0.6E13 8.0 13.0 3.5 0.6
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No.
⊕
⊖15 min. 4 min.
19 min.L
φD F
φd
⊕
⊖15 min. 4 min.
19 min.L
φD F
φd
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current(100 kHz / +105 ℃)*2: ESR(100 kHz to 300 kHz / +20 ℃)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”.
8.0 12.0 E12 5000 11 0.10 864 16SEPC270M470 10.0 13.0 F13 6100 10 0.10 1504 16SEPC470M
8.0 7.0 E7 4150 13 0.10 500 16SEPC220MD8.0 9.0 E9 5000 10 0.10 864 16SEPC270MX
8.0 9.0 E9 5000 10 0.10 576 16SEPC180MX8.0 12.0 E12 4360 16 0.10 576 16SEPC180M
150 8.0 7.0 E7 3220 22 0.12 500 16SEPC150MD
6.3 6.0 C6 2490 24 0.10 320 16SEPC100M6.3 9.0 C9 4680 10 0.10 500
8.0
8.0 7.0 E7 3220 22 0.12 500 10SEPC270MD
3900500 2SEPC470MZ
500 2SEPC100MZ330 5.0 9.0 4180 7 0.10 500 2SEPC330MZ
4180
0.12
7 0.10
500
100 5.0 9.0
390 10
Part number
857
2SEPC390M
8.0 13.0 E13 5700 8 0.10 592 6SEPC470M6.3 9.0 C9 5600 7 0.10 705
6SEPC680M6100 7
6.3 6.0 C6
Ratedvoltage
(V)
Ratedcapacitance
(±20 %)(μF)
Case size
Sizecode
Specifications(mm)
φD LRipple
current *1
(mA rms)
ESR*2
(mΩ max.)tan δ*3 LC*4
(μA)
Frequency correction factor for ripple current
SEPC series
0.05
220
Characteristics list
16SEPC100MW
270 1500
8.0 9.0 E9
1000 10.0 13.0 F13 6640 7 0.10
6SEPC560MW705 6SEPC560MX
680 7.0 E7
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 03-Feb-17
100 kHz ≦ f < 500 kHz1
10 kHz ≦ f < 100 kHz0.7
1 kHz ≦ f < 10 kHz0.3
120 Hz ≦ f < 1 kHzFrequency(f)Coefficient
2.5
B9
470 5.0 9.0 B9 4180 7 0.10
560
5.0 9.0 4180 7 0.10
6.3 9.0 C9 5600 7 0.10
820
6.3 9.0
500 2SEPC560MZ6.3 6.0 C6 3900 10 0.12 500 2SEPC560M
500 2SEPC560MW8.0 9.0 E9 4700 8 0.10 280 2SEPC560MX
C9 5600 7 0.10 500 2SEPC820MW8.0 7.0 E7 5300 8 0.10 500 2SEPC820MD8.0 9.0 E9 6100 7 0.10 500 2SEPC820MX8.0 9.0 7200 5 0.10 500 2SEPC820MY8.0 13.0 E13 6100 7 0.10 500 2R5SEPC820M
1000 8.0 9.0 E9 6100 7 0.10 500 2SEPC1000MX2700 10.0 13.0 F13 5560 10 0.10 1350 2SEPC2700M
4.0560
6.3 9.0 C9 5600 7 0.10 500
8.0 13.0 E13 6100 7 0.10 500
820 10.0 13.0 F13 6640 7 0.10 656
4SEPC560MW8.0 9.0 E9 6100 7 0.10 500 4SEPC560MX
4SEPC560M680 8.0 13.0 6100 7 0.10 544 4SEPC680M
4SEPC820M
6.3
220 6.3 5.5 C55 2980 18 0.12 280 6SEPC220M
470 6.3 9.0 C9 5600 7 0.10 592 6SEPC470MW8.0 9.0 E9 5700 8 0.10 592 6SEPC470MX
560
10
16
100
180
270
0.10
18 0.10 1260 6SEPC1000MD10.0 13.0 F13 5560 10 0.10 1890 6SEPC1500M
3530
Click here for part number list of lead terminal cuttingand lead terminal taping
Conductive Polymer AluminumSolid Capacitors
● High voltage (32 V max.)● 125 ℃ 1000 h● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.
8.0 5.0 0.5
4.0 V to 32 V 4.0 V to 20 V6.8 μF to 330 μF 15 μF to 680 μF 18 μF to 560 μF 150 μF to 1200 μF
Within ±20 % of the initial value ≦ 200 % of the initial limitDissipation factor (tanδ)
DC leakage current
SEQP series
E7 F8
4.0 V to 20 V22 μF to 150 μF
C6
Endurance
Dimensions (not to scale)
Within the initial limit
–55 ℃ to +125 ℃Size code
Features
Specifications
Rated voltage rangeCategory temp. range
Nominal cap.range
Marking
Capacitance change +125 ℃ 1000 h / +105 ℃, 5000 h, rated voltage applied
E12 F13
01-Nov-15Should a safety concern arise regarding this product, please be sure to contact us immediately.
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltageCapacitance change Within ±20 % of the initial value
Dissipation factor (tanδ) ≦ 150 % of the initial limitDC leakage current Within the initial limit (after voltage processing)
E12 8.0 12.0F13 10.0 13.0 5.0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
φd±0.05C6 6.3 6.0 2.5 0.45E7 8.0 7.0 3.5 0.45F8 10.0
Radial Lead Type
Damp heat(Steady state)
Size code φD±0.5 L max. F±0.5
0.63.5 0.6
DC leakage currentCapacitance tolerance
Dissipation factor (tan δ) Please see the attached characteristics listPlease see the attached characteristics list
±20 % (120 Hz / +20 ℃)
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No. ⊕
⊖
15 min. 4 min.
19 min.L
φD
φd
F
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current (100 kHz / +105 ℃ < Tx ≦ +125 ℃) / Allowable ripple current (100 kHz / Tx ≦ +105 ℃)*2: ESR(100 kHz to 300 kHz / +20 ℃)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”.
16 150 180
20100 150
326.8 15
330
18
22
10SEQP270M330 8.0 12.0 E12 1250 3950 17 0.15 660 10SEQP330M270 10.0 8.0 F8
6SEQP820M
10
56 6.3 6.0 C6 537 1700 45 0.12 280 10SEQP56M120 8.0 7.0 E7 810 2560 35 0.12
1170 3700 25 0.12
6SEQP150M3700 25 0.12 416 6SEQP330M
470 8.0 12.0 E12 1332 4210 15 0.15 592 6SEQP470M
4.0 560 680
6.3
82 6.3 6.0 C6 537
330 10.0 8.0 F8 1170
820 10.0 13.0 F13 1721
1200 10.0 13.0 F13
150
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
7.0 E7
8.0
0.100.120.12
604540
8.0 F8
792 0.150.15
2016
47 8.0 7.0 E768
Characteristics list
Frequency correction factor for ripple current
560
82
Ratedvoltage
(V)
Ratedcapacitance
(±20 %)(μF)
Case size
Sizecode
150
12.0 E12
12.0 E12
10.0 13.0 F13
8.0
6.3 6.0 C6330
10.0
39 6.3
0.12
1810256045203700
572 810
1430
Part number
0.120.15
5440
(mm)
φD L
10.0 8.0 F88.0 12.0 E128.0 7.0 E7
10.0 13.0 F136.3 6.0 C6
4SEQP150M4SEQP330M
300
1700 45 0.12 258 6SEQP82M8.0 7.0 E7 810 2560 35 0.12 472
6.0 C6
0.10
10.0 8.0 F8
0.1010080
8.0 7.0 E710.0 13.0 F138.0 0.15
0.152420
33204320
8.0 12.0 E1210.0 8.0 F8
14001800
440 560
100 kHz ≦ f < 500 kHzCoefficient 0.05 0.3 0.7 1
Frequency(f) 120 Hz ≦ f < 1 kHz 1 kHz ≦ f < 10 kHz 10 kHz ≦ f < 100 kHz
115 0.12502500790
4SEQP560M4SEQP680M4SEQP1200M
10SEQP560M16SEQP39M16SEQP82M16SEQP150M16SEQP180M16SEQP330M20SEQP22M20SEQP47M20SEQP68M20SEQP100M20SEQP150M32SEQP6R8M32SEQP15M32SEQP18M
10SEQP120M
44 96
220 470 272
660 448 544 960
840 312 656 480 576
600
400 600
775
540
5230162021203020
1050 1367
0.18
0.150.100.120.12
458 598 759
145018902400
36404720
1151 1493
5440 12 0.15
SEQP series
1170 1721
1655 512 670 955
Ripplecurrent*1
(mA rms)
Allowableripple
current*1
(mA rms)
Specifications
LC*4
(μA)tan δ*3ESR*2
(mΩ max.)
4035132512
13504030
0.12
Click here for part number list of lead terminal cuttingand lead terminal taping
Conductive Polymer AluminumSolid Capacitors
● Standard● 105 ℃ 3000 h● RoHS compliance, Halogen free
Unit:mm
* Depends on the case size.
8.0 7.0 3.5 0.450.45
F13
Radial Lead Type
5.0 0.5E8 10.0
Size code φD±0.5 L max.
8.0
C6 6.3
Within ±20 % of the initial value
F±0.5 φd±0.05
Size code C6 E7 F8 E12
Features
Specifications
SEP series
Damp heat(Steady state)
+60 ℃, 90 % to 95 %, 1000 h, No-applied voltage
Rated voltage rangeCategory temp. range –55 ℃ to +105 ℃
Capacitance toleranceNominal cap.range 22 μF to 150 μF 33 μF to 330 μF 56 μF to 680 μF
4.0 V to 20 V 2.5 V to 20 V
Marking
≦ 150 % of the initial limit Within the initial limit (after voltage processing)
Capacitance changeDissipation factor (tanδ)
DC leakage current
Within ±20 % of the initial value
Dimensions (not to scale)
100 μF to 680 μF 150 μF to 1500 μF±20 % (120 Hz / +20 ℃)
Endurance
Please see the attached characteristics listPlease see the attached characteristics list
Dissipation factor (tan δ)DC leakage current
Dissipation factor (tanδ)DC leakage current
+105 ℃ 3000 h, rated voltage applied (2.5 V 2000 h applied)
≦ 150 % of the initial limit Within the initial limit
Capacitance change
0.6
6.0
E12 8.0
01-Nov-15Should a safety concern arise regarding this product, please be sure to contact us immediately.
5.0 0.6F13 10.0 13.012.0 3.5
2.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
E7
Polarity marking (−)
R. capacitance(μF)
Series code*
R. voltage(V)
Lot No. ⊕
⊖
15 min. 4 min.
19 min.L
φD
φd
F
Conductive Polymer Aluminum Solid Capacitors
*1: Ripple current(100 kHz / +105 ℃)*2: ESR(100 kHz to 300 kHz / +20 ℃)*3: tan δ (120 Hz / +20 ℃)*4: After 2 minutes◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”.
600 10SEP120M3700 25 0.12 540 10SEP270M
8.0 12.0 E12 3950 17 0.15 660 10SEP330M
2560 35 0.12
5440 12 0.15 775 6SEP820M6.3 6.0 C6 1700 45 0.12 280 10SEP56M
6SEP330M470 8.0 12.0 E12 4210 15 0.15 592 6SEP470M
2560 35 0.12 472330 10.0 8.0 F8 3700 25 0.12 416
960 4SEP1200M6.3 6.0 C6 1700 45 0.12 258 6SEP82M
2R5SEP1500M
4SEP560M
0.124SEP470M
2560 35 660 4SEP330M
C6
E7
40 0.12 200 4SEP100M1810
4520
5440 12
40 0.12 300 4SEP150M8.0 7.0 2560 35 0.12 4406.3 6.0
10.0 8.0 F8 3700 25 0.12 544 4SEP680M8.0
0.18
2R5SEP680M
Part number
1810
470 12.0 E12
Ratedvoltage
(V)
Ratedcapacitance
(±20 %)(μF)
Case size
Sizecode
Specifications
100 6.3 6.0
2.5
4.0
E12 4520
376
13 0.15
13 0.15 448
1500
(mm)
φD LRipple
current *1
(mA rms)
ESR*2
(mΩ max.)tan δ*3 LC*4
(μA)
680 8.0 12.0 34010.0 13.0 F13 5440 12 0.18 750
Frequency correction factor for ripple current
SEP series
0.05
820 56
Characteristics list
150 220
150 6SEP150M
1200 680
82
8.0 7.0
560 10.0 8.0 F8 3700 25 0.12
330 4SEP220M
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15
100 kHz ≦ f < 500 kHz1
10 kHz ≦ f < 100 kHz0.7
1 kHz ≦ f < 10 kHz0.3
120 Hz ≦ f < 1 kHzFrequency(f)Coefficient
6.3
10
560 10.0 13.0 F13
10.0 13.0 F13
8.0 7.0 E7
10.0 13.0 F13
120 8.0 7.0 E7
330 270 10.0 8.0 F8
5230 13 0.15 840 10SEP560M
16
39 6.3 6.0 C6 1620 50 0.10 312 16SEP39M82 8.0 7.0 E7 2120 40 0.12 656 16SEP82M
150 10.0 8.0 F8 3020 30 0.12 480 16SEP150M180 8.0 12.0 E12 3640 20 0.15 576 16SEP180M330 10.0 13.0 F13 4720 16 0.15 792 16SEP330M
20
22 6.3 6.0 C6 1450 60 0.10 220
56 10.0 8.0F8
2400 40 0.12 224
100 10.0 8.0 2570 35 0.12 400
20SEP22M33 8.0 7.0
E71890 45 0.12 330 20SEP33M
47 8.0 7.0 1890 45 0.12 470 20SEP47M20SEP56M
68 10.0 8.0 2400 40 0.12 272 20SEP68M20SEP100MX
8.0 12.0 E12 3320 24 0.15 400 20SEP100M150 10.0 13.0 F13 4320 20 0.15 600 20SEP150M
Click here for part number list of lead terminal cuttingand lead terminal taping
Please contact Factory
CAUTION AND WARNING
The information in this catalog is valid as of August 2020.
Device Solutions Business DivisionIndustrial Solutions Company
1. The electronic components contained in this catalog are designed and produced for use in home electric appliances, office equipment, information equipment,communications equipment, and other general purpose electronic devices. Before use of any of these components for equipment that requires a high degree of safety, such as medical instruments, aerospace equipment, disaster-prevention equipment, security equipment, vehicles (automobile, train, vessel), please be sure to contact our sales representative corporation.
2. When applying one of these components for equipment requiring a high degree of safety, no matter what sort of application it might be, be sure to install a protective circuit or redundancy arrangement to enhance the safety of your equipment. In addition, please carry out the safety test on your own responsibility.
3. When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance.
4. Technical information contained in this catalog is intended to convey examples of typical performances and or applications and is not intended to make any warranty with respect to the intellectual property rights or any other related rights of our company or any third parties nor grant any license under such rights.
5. In order to export products in this catalog, the exporter may be subject to the export license requirement under the Foreign Exchange and Foreign Trade Law of Japan.
6. No ozone-depleting substances (ODSs) under the Montreal Protocol are used in the manufacturing processes of Automotive & Industrial Systems Company, Panasonic Corporation.