Upload
tadhg
View
85
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Concurrency Control Techniques Chapter 18. Dr. Muhammad Shafique. Outline. Granularity of data items Concurrency control techniques Locking techniques Timestamp ordering techniques Using locks for concurrency control in indexes Other concurrency control issues Summary. - PowerPoint PPT Presentation
Citation preview
ICS 424 - 01 (072) Concurrency Control Techniques 1
Concurrency Control Techniques
Chapter 18
Dr. Muhammad Shafique
ICS 424 - 01 (072) Concurrency Control Techniques 2
Outline
• Granularity of data items • Concurrency control techniques
1. Locking techniques
2. Timestamp ordering techniques
• Using locks for concurrency control in indexes• Other concurrency control issues• Summary
ICS 424 - 01 (072) Concurrency Control Techniques 3
Concurrency Control Techniques
• Categories of concurrency techniques1. Locking techniques
2. Timestamp ordering techniques
3. Multi-version concurrency control techniques
4. Optimistic concurrency control techniques
5. Advanced concurrency control techniques
ICS 424 - 01 (072) Concurrency Control Techniques 4
Granularity of Data Items• Data item granularity
Size or granule of data for concurrency control. It could be• An attribute value• A database record• A disk block• A whole file• The whole database
• Data item granularity and degree of concurrency• Fine granularity --- refers to small item sizes• Coarse granularity --- refers to large item sizes• Larger the data item size, lower the degree of concurrency
• Data item size depends on the types of transactions
ICS 424 - 01 (072) Concurrency Control Techniques 5
Concurrency Control Using Locks• Lock
• A variable associated with a data item
• Describes status of the data item with respect to operations that can be performed on it
• Types of locks• Binary locks
• Locked/unlocked
• Enforces mutual exclusion
• Multiple-mode locks: • Each data item can be in one of three lock states
1. Read lock or shared lock
2. Write lock or exclusive lock
3. Unlock
• Lock table managed by lock manager subsystem of DBMS
ICS 424 - 01 (072) Concurrency Control Techniques 6
Lock and Unlock Operations for Binary Locks
ICS 424 - 01 (072) Concurrency Control Techniques 7
Locking Rules1. T must issue read_lock(X) or write_lock(X) before any
read_item(X) operation is performed in T
2. T must issue write_lock(X) before any write_item(X) operation is performed in T
3. T must issue unlock(X) after all read_item(X) and write_item(X) operations are completed in T
4. T will not issue a read_lock(X) if it already holds a read lock or write lock on X (may be relaxed)
5. T will not issue a write_lock(X) if it already holds a read lock or write lock on X (may be relaxed)
6. T will not issue unlock (X) request unless it holds a read lock write lock on X
ICS 424 - 01 (072) Concurrency Control Techniques 8
Conversion of Locks
• A transaction T that holds a lock on item X, under certain conditions, is allowed to convert the lock from one state to another• Upgrade
Convert read_lock to write_lock
• Downgrade
Convert write_lock to read_lock
• Using locks does not guarantee serializability of schedules on its own
ICS 424 - 01 (072) Concurrency Control Techniques 9
Two Transactions
T1read_lock(Y);
read_item(Y);
unlock(Y);
write_lock(X);
read_item(X);
X:=X+Y;
write_item(X);
unlock(X);
T2read_lock(X);
read_item(X);
unlock(X);
write_lock(Y);
read_item(Y);
Y:=X+Y;
write_item(Y);
unlock(Y);
Let’s assume serial schedule S1: T1,T2
Initial values: X=20, Y=30 Result: X=50, Y=80
ICS 424 - 01 (072) Concurrency Control Techniques 10
Locks Alone Don’t Insure Serializability
T1read_lock(Y);read_item(Y);unlock(Y);
write_lock(X);read_item(X);X:=X+Y;write_item(X);unlock(X);
T2
read_lock(X);read_item(X);unlock(X);write_lock(Y);read_item(Y);Y:=X+Y;write_item(Y);unlock(Y);
Non-serializable!
Result: X=50, Y=50
unlocked too early!
Let’s run T1 and T2 in interleaved fashion
Schedule S
ICS 424 - 01 (072) Concurrency Control Techniques 11
Two-Phase Locking (2PL) Protocol
• Transaction is said to follow the two-phase-locking protocol if all locking operations precede the first unlock operation • Expanding (growing) phase
• Shrinking phase
• During the shrinking phase no new locks can be acquired• Downgrading ok
• Upgrading is not
• Example
ICS 424 - 01 (072) Concurrency Control Techniques 12
2PL ExampleT1’
read_lock(Y);
read_item(Y);
write_lock(X);
unlock(Y);
read_item(X);
X:=X+Y;
write_item(X);
unlock(X);
T2’read_lock(X);
read_item(X);
write_lock(Y);
unlock(X);
read_item(Y);
Y:=X+Y;
write_item(Y);
unlock(Y);
• Both T1’ and T2’ follow the 2PL protocol
• Any schedule including T1’ and T2’ is guaranteed to be serializable
• Limits the amount of concurrency
ICS 424 - 01 (072) Concurrency Control Techniques 13
Locking Techniques for Concurrency Control
• Quick review of ideas discussed so far• Locks and system lock tables
• Lock table and lock manager
• Binary locks --- lock & unlock operations (critical sections)
• Shared/exclusive locks --- read-lock, write-lock, and unlock
• Conversion of locks• Upgrade the lock
• Downgrade the lock
• Concurrency control subsystem generates read-lock and write-lock requests on behalf of the transactions
• Using locks in transactions does not guarantee serializability of schedules on its own
ICS 424 - 01 (072) Concurrency Control Techniques 14
Locking Techniques for Concurrency Control (Cont.)
• Two-phase locking protocol (2PL)All lock operations precede the first unlock operation• Expanding phase and shrinking phase
• Upgrading of locks must be done in expanding phase and downgrading of locks must be done in shrinking phase
• If every transaction in a schedule follows 2PL protocol then the schedules is guaranteed to be serializable.
• Variants of 2PLBasic, conservative, strict, and rigorous
ICS 424 - 01 (072) Concurrency Control Techniques 15
Locking Techniques for Concurrency Control (Cont.)
1. Basic 2PLAll lock operations before the first unlock operation
2. Conservative 2PL or static 2PL Lock all the items it accesses before the transaction begins execution.
1. Deadlock free protocol2. Read-set and write-set of the transaction should be known
3. Strict 2PL No exclusive lock will be unlocked until the transaction commits or aborts
• Strict 2PL guarantees strict schedules4. Rigorous 2PL
No lock will be unlocked until the transaction commits or aborts
ICS 424 - 01 (072) Concurrency Control Techniques 16
Dealing with Deadlocks and Starvation in 2PL
• 2PL can produce deadlocks• Deadlock and starvation in 2PL
Deadlock occurs when each transaction T in a set of two or more transactions is waiting for some item that is locked by some other transaction T’ in the set.
• Example (next slide)
ICS 424 - 01 (072) Concurrency Control Techniques 17
Dealing with Deadlocks and Starvation in 2PL
ICS 424 - 01 (072) Concurrency Control Techniques 18
Dealing with Deadlocks and Starvation in 2PL• Deadlock prevention protocols
• Conservative 2PL, lock all needed items in advance
• Ordering all items in the database
• Possible actions if a transaction is involved in a possible deadlock situation• Block and wait
• Abort and restart
• Preempt and abort another transaction
ICS 424 - 01 (072) Concurrency Control Techniques 19
Dealing with Deadlocks and Starvation in 2PL• Two schemes that prevent deadlock (Timestamp based)
• Wait-die
An older transaction is allowed to wait on a younger transaction whereas a younger transaction requesting an item from held by an older transaction is aborted and restarted with the same timestamp
• Wound-wait
A younger transaction is allowed to wait on an older transaction whereas an older transaction requesting an item from held by a younger transaction preempts the younger transaction by aborting it.
ICS 424 - 01 (072) Concurrency Control Techniques 20
Dealing with Deadlocks and Starvation in 2PL• Two schemes that prevent deadlock and do not
require timestamps• No waiting
Abort immediately and restart after a certain time delay
• Cautious waiting
• If a transaction holding the lock is not waiting for another item to be locked then allow T to wait otherwise abort and restart T
ICS 424 - 01 (072) Concurrency Control Techniques 21
Dealing with Deadlocks and Starvation in 2PL• Deadlock detection and timeouts
• Construct and maintain a wait-for graph• Victim selection
• Timeouts
• StarvationA transaction cannot proceed for an infinite period of time while other transactions in the system continue normally• Unfair waiting scheme
• Victim selection
ICS 424 - 01 (072) Concurrency Control Techniques 22
Concurrency Control Based on Timestamp Ordering• Timestamp --- a unique identifier created by the
DBMS to identify a transaction• read-TS(X)
• The largest timestamp among all the timestamps of transactions that have successfully read item X
• write-TS(X)• The largest timestamp among all the timestamps of transactions
that have successfully written item X
• Timestamp Ordering (TO) algorithms• Basic timestamp ordering• Strict timestamp ordering• Thomas’s write rule
ICS 424 - 01 (072) Concurrency Control Techniques 23
Concurrency Control Based on Timestamp Ordering (Cont.)
• Basic timestamp ordering algorithmOrder transactions based on their timestamps1. T issues a write(X)
1. If read-TS(X) > TS(T) or if write-TS(X) > TS(T) the abort and rollback T and reject the operation.
2. If condition above does not occur then execute the operation and set write-TS(X) = TS(T)
2. T issues a read(X)1. If write-TS(X) > TS(T) then abort and rollback T and reject the
operation.2. If write-TS(X) TS(T) then execute the operation and set
read-TS(X) = max ( read-TS(X), TS(T) )
• The schedules produced by basic TO are guaranteed to be conflict serializable
• No deadlocks but cyclic restart are possible (hence starvation)
ICS 424 - 01 (072) Concurrency Control Techniques 24
Concurrency Control Based on Timestamp Ordering (Cont.)
• Strict Timestamp Ordering (strict TO)• A transaction T that issues a read-item(X) or write-item(X)
such that TS(T) > write-TS(X) has its read or write operation delayed until the transaction T’ that wrote the value of X (hence TS(T’ ) = write-TS(X)) has committed or aborted.
• No deadlocks, since T waits for T’ only if TS(T) > TS(T’)
• Strict TO ensures that the schedules are both strict (for easy recoverability) and (conflict) serializable
ICS 424 - 01 (072) Concurrency Control Techniques 25
Concurrency Control Based on Timestamp Ordering (Cont.)
• Thomas’s write rule• It rejects fewer write operations, by modifying the basic TO
checks for the write-item(X) operation as follows: 1. If read-TS(X) > TS(T), then abort and roll back T and reject the
operation.
2. If write-TS(X) > TS(T), then do not execute the write operation but continue processing. [This is because some transaction with timestamp greater than TS(T)—and hence after T in the timestamp ordering—has already written the value of X. Hence, we must ignore the write_item(X) operation of T because it is already outdated and obsolete.
Notice that any conflict arising from this situation would be detected by case (1).]
3. If neither the condition in part (1) nor the condition in part (2) occurs, then execute the write-item(X) operation of T and set write-TS(X) to TS(T).
• Thomas’ write rule does not enforce conflict serializability
ICS 424 - 01 (072) Concurrency Control Techniques 26
Using Locks for Concurrency Control in Indexes
• Two phase locking can be applied to indexes. Here the nodes of an index correspond to disk pages.
• Tree structure of the index can be taken advantage of• A conservative approach for insertions can be to lock
the root node in exclusive mode.• Index locking using B-link tree rather than B+ tree
• In B-link tree, sibling nodes at the same level are linked together at every level
ICS 424 - 01 (072) Concurrency Control Techniques 27
Other Concurrency Control Issues• Insertion, deletion, and phantom records
• Insertion operation• New data item inserted in the database
• Deletion operation
• Phantom record• Use index locking
• Interactive transactions• No rollback
• Delay output of transactions until they have committed
• Latches• Locks held for a short duration are called latches
• Latches are used to , for example, write a buffer to a page
ICS 424 - 01 (072) Concurrency Control Techniques 28
Summary
• Granularity of data items • Concurrency control techniques
1. Locking techniques
2. Timestamp ordering techniques
• Using locks for concurrency control in indexes• Other concurrency control issues
Thank you