Upload
phamliem
View
230
Download
0
Embed Size (px)
Citation preview
Rev 8-06
Main Office: 41730 Regan Way Murrieta, CA 92562
Phone (800) 775-8880 www.americrete.com
Concrete Stain Pro
SP-1000
Product Description
Americrete’s SP-1000 Concrete Stain Pro is a user friendly, water base stain. This product penetrates the surface for a tenacious bond. Available in 8 standard acid colors but contains no acid. These colors can be mixed for unlimited selection. SP-1000 Stain Pro is used as a protective, decorative coloring system over new and old, pigmented and non-pigmented concrete, masonry and wood surfaces. The surface must be sealed with A-1300, A-1350, A-1400, A-1450, A-4200, A-4201 or A-5500. This product can be used on driveways, pool decks, architechtural designs, natural stone, garages, stamped concrete, stucco, walkways, industrial floors, kitchen floors, concrete block, exposed aggregate, brick, pre-cast concrete, tile, fencing, wood decks, Mexican pavers, Americrete cements and anyhthing that will accept a penetrating stain. See Specification A-10,000 for application procedures.
Coverage Rate
SP-1000 Stain Pro will receive approximately 300 - 600 square feet per gallon depending upon the application procedure and surface porosity.
Primary Uses SP-1000 Stain Pro is a semi-gloss product. It has the ease of application of acrylics and penetrates the surface for a tenacious bond. SP-1000 Stain Pro is stain and abrasion resistant. This product is also water repellant, non-yellowing and is easy to clean and maintain. Colors and seals for a natural look. Resistant to automotive fluids and other chemicals.
Application
SP-1000 can be applied many different ways. The most popular form of application is with a Hudson Sprayer applying at a rate of approximately 300 square feet per gallon. SP-1000 can be mottled by spraying one color into another color. SP-1000 can be applied with a sponge, rag, spray equipment or broom. Use your imagination!
Important Notice to Purchaser Please see Important Notice to Purchaser in the front of this Specification Book.