5/21/2018 Concrete Lab Equipment List
1/2
CIVIL ENGG. DEPARTMENT
NAME OF THE LABConcrete lab
Subject: Requirement of machinery & equipment to be procured
under.
Sr.
No
Detailed Specification of Equipment Approx.
Cost in
Rs.
Qnty. Total Cost
in Rs.
1
2 Sieve set
Specification: 600, 300, 150, 90, 75 (Micron), & 1.18, 2.36,
4.75,
10 (mm) for grading of fine and coarse aggregates
1500 9 13500
3 Concrete Mixer, Drum Type, Capacity 1 Cu Feet. 75000
Specifications: The mixer consists of a steel vessel of 100
litres
capacity, mounted on a frame. The vessel is rotated at 20-24
RPM
with the help of a motor and a reduction gear.
4 Electronic Weighing Balance, 300 KG
Specification: Weighing Balance to weigh the materials in
the
Concrete Lab.
35000 1 35000
7 Longitudinal Compresso-meter for Modulus of
Elasticity
25000
Specification: This apparatus is used for determination of the
strain
and deformation characteristics of cement concrete
cylindricalspecimens of 150 mm dia x 300 mm length. The
Compresso-meter
consists of two frames for clamping to the specimen by means
of
five tightening screws with hardened and tapered ends. Two
spacers hold the two frames in position. An adjustable pivot
rod
rests on pivot screws.8 Permeability Apparatus
Specification: The permeability is determined on cement.
Mortar
and concrete specimens, either cast in the laboratory or
obtained by
cutting out cores from existing structures. The Permeability
test is
carried out as per the standard IS:3085
1.5
4
Total Cost
Note:- The above cost is approximate & includes VAT/Excise
duty. The cost may vary with prevailingmarket conditions/Govt. VAT
rate/Excise etc. The Cost is worked out for estimation purpose
only.
