Upload
nguyenngoc
View
223
Download
4
Embed Size (px)
Citation preview
470
16
Concrete & Cementing
axminster.co.uk/signup for our exclusive email offersCall 03332 406406
Minimix 130 £289.94 £241.62 504960 Inc.vat Ex.vat Code
The ideal tool for shovelling out or backfi lling trenches, concrete mixing, working tarmac and moving cement chippings etc. With unvarnished hardwood shaft for strength and durability. Forged in the UK and built to last for years. Every builder should have one, or even several.
Bulldog No.2 Contractor’s Square Mouth Shovel
No.2 Contractors Shovel £12.44 £10.37 953446 Inc.vat Ex.vat Code
With unvarnished hardwood shaft for strength and durability. Forged
Inc.vat Ex.vat Code
One piece, lightweight but extremely tough and durable fl oat used for skimming. Easily cleaned after use. Guaranteed not to warp.
Float 240mm x 120mm £3.24 £2.70 391023 Inc.vat Ex.vat Code
PU Float
With its polished stainless steel blade, this trowel will leave a smooth surface and is easy to clean and maintain. It is fi tted with a comfortable rubberised handle for a fi rm grip that minimises fatigue even after prolonged use. The aluminium alloy mounting adds rigidity and is riveted to the blade for security. Size 325 x 100mm.
RST Stainless Steel Trowel with Soft Grip Handle
325 x 100mm £9.95 £8.29 211863 Inc.vat Ex.vat Code
With its polished stainless steel blade, this trowel will leave a
RST Stainless Steel Trowel with Soft Grip Handle
Permashape trowels, with Durasoft handles for comfort and reduced fatigue. These trowels are “broken in” with a bevelled leading edge and ‘feathered’ sides to eliminate lines & ripple right from the start. 350mm(14”) in either high carbon spring or stainless steel, or 500mm(19.68”) in spring steal. All 125mm(5”) wide Spring Steel 350 x 125mm £35.94 £29.95 610109 Spring Steel 500 x 125mm £42.95 £35.79 200767 Stainless Steel 350 x 125mm £46.94 £39.12 590028
Inc.vat Ex.vat Code
Marshalltown Broken-In Trowels
One of the most useful trowels one will ever buy with a host of uses other than applying a neat margin to fi nished work. The one piece forging (50 x 125mm) is made of high carbon steel, tempered and then ground with a slight taper from heel to toe. The trowel is fi tted with Marshalltown’s Durasoft handle for added comfort.
Margin Trowel £11.94 £9.95 311989 Inc.vat Ex.vat Code
Marshalltown Margin Trowel
• Compact and portable for easy transportation and set-up• 130L drum capacity• 90L mix capacity• Swivel stand
Belle Electric Minimix 130 Cement Mixer
Minimix 150 110V £419.94 £349.95 504962 Minimix 150 230V £389.94 £324.95 504963 Minimix 150 Honda - Petrol £679.94 £566.62 504961
Inc.vat Ex.vat Code
• Compact and portable for easy transportation and set-up
• 230V, 110V and Honda Petrol models available• Mixes full barrow load of concrete or mortar• 130L drum capacity• 90L mix capacity• Designed for professional use• IP45 rated motor• NVR safety switch
Belle Minimix 150 Cement Mixer
Concrete & Cementing
Size 8 (M) £2.94 £2.45 211763 Size 9 (L) £2.94 £2.45 211764 Size 10 (XL) £2.94 £2.45 211765
Inc.vat Ex.vat Code
• All weather glove - multi use, excellent grip• Palm coated nitrile knitted nylon• Excellent grip even in the wet• Seamless for comfort and dexterity• Oil and grease resistant, coated with nitrile rubber• High tear and puncture resistant level 3• High abrasion level 4. Cut level 1• EN388 (4 1 3 3)
uvex Unipur 6634 Nitrile Work Gloves
16_Building 470_484.indd 470 29/11/2013 12:45
471
16
Concrete & Cementing
Bricklaying & Pointing
Order online axminster.co.uk/building
The blade is extruded magnesium fi tted with a double hang wooden handle. Magnesium is very hard, durable and lightweight. It produces a smoother fi nish than a wooden fl oat. It brings the cream to the surface of the concrete, making the fi nal fi nishing or polishing with a steel trowel that much easier and quicker. The M145 is one of Marshalltown’s most popular trowels. Made in the USA the blade is 400 x 80mm. Float 400 x 80mm £18.95 £15.79 610088 Inc.vat Ex.vat Code
Marshalltown Magnesium Float
This fl oat uses the best clear seasoned redwood for its base with a large wooden D shaped handle. Being wooden, it is light and easy to use leaving a slightly textured matt fi nish in use. Wooden fl oats are also very good at levelling and smoothing prior to fi nal fi nishing.
Float 300 x 125mm £8.45 £7.04 345025 Inc.vat Ex.vat Code
Marshalltown Redwood Float A block of coarse carborundum 150mm x 75mm x 25mm, with deep fl utes on the underside, securely fi tted to a large plastic D handle. Used for rubbing down high spots on concrete fl oors or rounding sharp corners etc. Made in the USA.
150 x 75 x 25mm £11.75 £9.79 591011 Inc.vat Ex.vat Code
Marshalltown Rubbing Brick Marshalltown Rubbing Brick
It may look like a tape measure, and it may have a metric scale on one edge, but any similarity ends there. The Brick Mate has a scale which can be used to calculate the number of whole and part bricks required for a given length up to 10 metres (this includes a 10mm mortar bond). The scale also measures vertical courses of brick. Concrete blocks are catered for in exactly the same way, length and courses again in whole and part blocks. Use this tool for dry setting out, estimating the required material and checking course heights as work progresses.
Brick Mate 8m £16.44 £13.70 200642 Inc.vat Ex.vat Code
Fisco Brick Mate 8m It may look like a tape measure,
A ruggedly made brick hammer with tubular steel handle, forged head and moulded rubber handle. The polished face of the head is 23mm square and the cutting head 30mm wide. Weight 600g(21oz).
600g(21oz) £7.25 £6.04 295001 Inc.vat Ex.vat Code
Brick Hammer
£13.70 200642
A ruggedly made brick hammer with
Ex.vat Code
Fitted with Marshalltown’s Durasoft handle, giving a fi rm sure grip combined with blister free comfort for all day use. One of the fi nest quality brick trowels on the market. Made in the USA.
250mm(10”) £36.44 £30.37 590422 275mm(11”) £36.44 £30.37 590983
Inc.vat Ex.vat Code
Marshalltown Philadelphia Pattern Brick Trowels
Always ready for the job, whatever it is, with a 275mm(11”) Philadelphia pattern brick trowel, a 175mm(7”) gauging trowel and a 150mm(6”) pointing trowel. All with comfortable ‘soft touch’ handles on tangs welded to high quality blades that will serve the weekend ‘bricky’ for many years.
Set of 3 Builder’s Trowels
Set of Three Trowels £10.94 £9.12 200624 Inc.vat Ex.vat CodeSet of Three Trowels
Strong die cast aluminium body mounted onto two 38mm(1.1/2”) diameter wheels. Uses a hardened nail, adjustable for depth, to remove old mortar from between bricks prior to repointing.
Joint Raker £9.44 £7.87 600301 Inc.vat Ex.vat Code
Marshalltown Joint Raker
A very simple device that simply screws onto the shaft of an angle grinder that has a M14 x 2mm thread and is then driven into the failing mortar allowing the coarse carbide grit on the rake’s surface to rapidly remove the spent material. Simple to use and very effective.
Pack of 3 £22.45 £18.71 719542 Inc.vat Ex.vat Code
Axminster Mortar Rake
This is an absolute godsend. Looking remarkably similar to an oversized, extra heavy-duty mastic gun, the Pointing and Grouting Gun makes light work of a tedious task. Its powerful pump action forces the mortar or grout deep into the joints, minimising voids and maximising strength. Mortar should be mixed as per the manufacturer’s instructions. If using normal builder’s sand use a proprietary plasticiser to ensure a smooth even fl ow of mortar. Do not use with cements containing sharp sand or gravel. Supplied with one pointing and one grouting nozzle. The grouting nozzle tip measures 2.5mm x 4mm and is adjustable by trimming the length of the nozzle whilst the pointing nozzle measures approximately 12 x 7mm. Replacement nozzles are available separately.
Gun £29.94 £24.95 015121 Pair of Replacement Nozzles £2.45 £2.04 719994
Inc.vat Ex.vat Code
Pointing & Grouting Gun This is an absolute godsend. Looking remarkably similar to
Pointing & Grouting Gun
Like the Marshalltown brick trowels these are made from a one piece forging of high carbon steel taper ground and hardened throughout. Fitted with Durasoft handles for extra comfort during long use. Available in two sizes. 125mm(5”) £11.94 £9.95 590462 150mm(6”) £11.94 £9.95 590692
Inc.vat Ex.vat Code
Marshalltown 45 Pointing Trowel A stainless steel plate with two turned up edges to prevent the ‘pug’ from falling off. A wooden handle is fi tted to a steel spigot welded to the underside of the plate. The handle is angled making it easy and comfortable to hold keeping the plate level. In its native Austria this plate is used when pointing stone walls. We thought it a superb tool for use on small plastering jobs, or for holding fi ller when making good, prior to decorating. Size 230 x 150mm (9” x 6”). Plate 230 x 150mm £14.94 £12.45 391013 Inc.vat Ex.vat Code
Pointing Plate
Looking like a giant icing bag it performs very much the same process. Simply fi ll the bag with mortar using a good plasticiser and squeeze out in between bricks or slabs. The bag itself is of seamless heavy-duty black vinyl and is fi tted with a steel exit nozzle with a 9.5mm hole. The bag is 600mm long and the top diameter is 225mm. To clean simply turn inside out and hose off any mortar remaining on the bag.
Grout Bag £5.45 £4.54 378184 Inc.vat Ex.vat Code
Marshalltown Grout Bag
Marshalltown 45 Pointing Trowel
Bricklaying & Pointing
Set of 3 Set of 3 Builder’s Trowels
16_Building 470_484.indd 471 29/11/2013 12:46
472
16
Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95Call 03332 406406
Bricklaying & Pointing
Paving & Builder’s Lines Plastering
Stringliner - 76m £8.45 £7.04 599412 Inc.vat Ex.vat Code
Bricklaying & Pointing
The gauging trowel is amongst the most useful general tools in the builder’s bag. Used for mixing small quantities of mortar, plaster etc., for all manner of odd jobs and making good. The rounded end easily reaches into the curved corners of modern plastic builder’s buckets. Made from a one-piece forged tang and blade with Durasoft handle.
Marshalltown Gauging Trowel
175mm(7”) £21.95 £18.29 590178 Inc.vat Ex.vat Code
Hardened and tempered carbon steel blade fi tted with a comfortable soft touch handle. Shaped to scrape every last dollop of mortar from a bucket. The corners of the clipped end are ground with a slight radius to prevent damage to the bottom of a moulded builder’s bucket and get right into the rounded bottom corner. Length 180mm.
Bucket Trowel
Trowel £4.64 £3.87 202281 Inc.vat Ex.vat Code
Hardened and tempered carbon steel blade fi tted with a comfortable
A neat fi nish not only looks good but offers increased weather protection so all your hard work will last for years to come. Grab yourself one of Marshalltown’s high carbon steel, hard tempered and highly polished brick jointer. The curved cross section leaves mortar joints with a neat, smart looking fi nish. Available in a range of three double ended cranked sizes.
10mm & 13mm £5.24 £4.37 610103 13mm & 16mm £5.24 £4.37 610100 19mm & 22mm £5.24 £4.37 610101
Inc.vat Ex.vat Code
Marshalltown Brick Jointer
Made from one piece forging of high carbon steel the 46 Series pointing trowels are narrower then normal pointing trowels and are designed for fi ner work. At 100 x 50mm (4” x 2”) this is the trowel to use for archaeological digs especially with the comfortable Durasoft handle.
100mm(4”) £11.94 £9.95 311136 Inc.vat Ex.vat Code
Marshalltown 46 Pointing Trowel
Solid forged throughout, ground with a pronounced taper for sturdiness and fl exibility when working in the confi ned space for which these trowels are designed. Available in two widths both fi tted with Durasoft handles. Made in the USA. 13mm £13.25 £11.04 590309 16mm £13.25 £11.04 590352
Inc.vat Ex.vat Code
Marshalltown Tuck Pointer
Heavy duty 70kg(150lb) twisted nylon line in 76m(250’) reels. Better still it is available in hi-viz pink or yellow as well as white and yellow. The hi-viz is particularly useful when the line is low down where people may trip. Marshalltown Mason’s line is wound on a core 150mm(6”) long and 25mm(1”) diameter.
White Line - 76m £4.74 £3.95 600337 Yellow Line - 76m £5.45 £4.54 600338 Hi-viz Pink - 76m £7.64 £6.37 600340 Hi-viz Yellow - 76m £6.44 £5.37 600341
Inc.vat Ex.vat Code
Marshalltown Mason’s Line - 76m Heavy duty 70kg(150lb) twisted nylon line in
Marshalltown Mason’s Line - 76m
Ex.vat Code
76m(250’) of hi-viz pink nylon braided line, supplied on a handle for fast setting out, easy retrieval and neat tangle free storage. If the line eventually gets used up then refi lls are available.
Stringliner
Paving & Builder’s LinesPaving & Builder’s LinesPaving & Builder’s Lines
An ABS-cased chalk line supplied with 30m(100’) of cotton line and a 113g(4oz) bottle of chalk. The tough case is pear shaped for use as an occasional plumb bob. It features a self-sealing grommet for spill-free refi lls. An internal felt wiper ensures the correct amount of chalk on the line each time for accurate lines every time. This line is a thin multi-material (cotton and polyethylene) mix for increased strength. A cost effective chalk line reel, manufactured in the USA. Other colours of chalk are available separately.
Chalk Line with Red Chalk £9.74 £8.12 502467 Chalk Line with Blue Chalk £9.74 £8.12 502468
Inc.vat Ex.vat Code
Keson Pro-Line Chalk Reel
227g (8oz) refi lls for chalk lines in a variety of colours. Keson chalk sticks to your line until you decide you want it to stick to something else. Snapping a line with Keson ProChalk achieves a perfect line every time. Brilliant colour tones provide strong, sharp lines. The colour and the amount of the pigment determine the vividness and permanence of the line. Over the years, Keson have fi ne-tuned the formula to produce chalk that performs with consistent excellence. Made in USA.
Chalk 227g/8oz Red £2.94 £2.45 502462 Chalk 227g/8oz Blue £2.94 £2.45 502463 Chalk 227g/8oz Glo-Lime £2.94 £2.45 502465
Inc.vat Ex.vat Code
Keson Chalk for Chalk Lines
Useful attachments for a power drill when mixing paint, wallpaper paste and smaller quantities of plaster, joint compound, tile adhesive etc. Welded baskets with powder coated fi nish. Points to remember: use slow speed, immerse fully before switching on and allow to stop before removing, that way suffi cient material will remain in the can to start the job. Mixer 120 x 500mm.
120 x 500mm £7.64 £6.37 583631 Inc.vat Ex.vat Code
Axminster Paint/Plaster Mixer
The 735mm(29”) long hexagon shaft will fi t into a 13mm or larger drill chuck. At the business end the 210mm(8.1/4”) x 125mm(5”) paddle is designed to mix effi ciently and quickly.
735 x 210mm £14.45 £12.04 600346 Inc.vat Ex.vat Code
Marshalltown “Quick Mix” Drill Attachment
Drop forged high carbon steel, hardened and tempered. Bevelled striking face minimises mushrooming and chipping. Blade ground smooth on both faces, main bevel ground one side only.
Bolster 100mm £14.24 £11.87 441043 Inc.vat Ex.vat Code
Vaughan Bricklayer’s Bolster
Used by bricklayers for fi tting brick or stone work prior to laying and for dressing brick and stone work prior to rendering. The double scutch has two slotted ends with a hickory handle and is supplied with one chisel and one comb bit.
Double Scutch £12.24 £10.20 400457 Scutch Chisel 25mm(1”) (Pkt 5) £3.95 £3.29 701001 Scutch Comb 25mm(1”) (Pkt 5) £3.95 £3.29 701002
Inc.vat Ex.vat Code
Scutch Hammers
Yellow buckets that are useful for a whole range of jobs on site or around the home. They are very durable and have a pouring spout on the side.
Bucket 15 Litre £3.95 £3.29 341100 Inc.vat Ex.vat Code
Plasterer’s/Builder’s Yellow Bucket for a whole range of jobs on site
very durable and have a pouring
Inc.vat Ex.vat Code
16_Building 470_484.indd 472 29/11/2013 12:47
473
16
*SAVE with a bulk discount – see online axminster.co.uk or call 03332 406406
Plastering Dry Lining
Plaster/Filler Mixing Cup
Mixing Cup 145mm £1.94 £1.62 595739 Inc.vat Ex.vat Code
Square 10mm & 15mm £3.74 £3.12 391015 Square 20mm & 25mm £3.95 £3.29 391016 Leaf & Square 15mm £3.74 £3.12 391017 Leaf & Square 20mm £3.74 £3.12 391018
Inc.vat Ex.vat Code
Plasterer’s Small Tools
• Flexible• 145mm diameter by 50mm deep• For mixing small quantities of plaster or fi ller• Easy to clean
• For touching in and small repairs• Forged, hardened, tempered and ground central portion • Moulded plastic grip• Combinations of square and leaf shaped ends
RST Stainless Steel Trowel with Soft Grip Handle
325 x 100mm £9.95 £8.29 211863 Inc.vat Ex.vat Code
Marshalltown Permashape Plastering Trowel
This trowel is “broken in” to eliminate lines and ripple right from the start. 500mm(20”) - made from high carbon spring steel.
500 x 125mm £42.95 £35.79 200767 Inc.vat Ex.vat Code
Plastering
325 x 125mm £40.94 £34.12 200768 Inc.vat Ex.vat Code
Marshalltown Permashape Gold Plastering Trowel
275 x 115mm £34.94 £29.12 595465 Inc.vat Ex.vat Code
Marshalltown Xtralite Trowel
Use to scratch or score the fi rst coat of plaster or render, to enable the second to ‘key’ effectively.
Scratching Tool £7.25 £6.04 800349 Inc.vat Ex.vat Code
Plasterer’s Scratch Tool
450mm - 760mm £94.94 £79.12 100098 610mm - 1,000mm £99.95 £83.29 100097
Inc.vat Ex.vat Code
Plasterer’s Stilts
£7.25 £6.04 800349 Inc.vat Ex.vat Code
Use to stir and mix paint, glue, tile adhesive etc, suitable for up to 30kg mix. Fitted with a variable speed trigger, the 960W motor takes the strain out of hand mixing. Tool holder M14. (Please note: do not exceed 120mm stirrer).Supplied with 90mm diameter stirrer.
UT121/2 Power Mixer 230V £144.95 £120.79 506098 Inc.vat Ex.vat Code
Makita UT121/2 Power Mixer/Stirrer
325 x 125mm Inc.vat
Marshalltown Permashape Gold Plastering Trowel
Marshalltown Use to stir and mix paint, glue, tile adhesive etc, suitable for up to
Makita UT121/2 Power
325 x 325mm £19.94 £16.62 610090 Inc.vat Ex.vat Code
• Lightweight• Heavy gauge hard-rolled aluminium• Durasoft handle and foam callous protector for comfort
Marshalltown 1 Alloy Hawk 325 x 325mm
• Polished stainless steel blade• Easy to clean and maintain, will not rust in your tool bag• Comfortable rubberised grip for minimal fatigue• Aluminium alloy handle mount adds rigidity
• Gold Permashape Plastering Trowel 325 x 125mm• Stainless steel fi nishing trowel• Special Gold fi nish blade and a Durasoft handle• Already “broken in” • Helps to achieve the smoothest possible surface
• Tempered, polished and ground from fi nest steels• Blades riveted to aluminium alloy handle• Durasoft, banana-shaped handles for comfort
• Adjustable calf brace straps and heel plates
• Anodised aluminium construction
• Design allows walking as naturally as possible
• Height adjustable (450-760mm or 610-1,000mm)
• Full set of instructions
£3.74 £3.12 391018
Inc.vat Ex.vat Code
Board Carrier (each) £13.94 £11.62 391025 Inc.vat Ex.vat Code
Wallboard Carrier
Axminster Panel & Board Carrier
Carrier £8.45 £7.04 950130 Inc.vat Ex.vat Code
• Large diameter• Comfort grip handle• Non-slip protective rubber sleeves
• Carry sheet materials easily and safely• Ideal for carrying 2,400 x 1,200mm (8ft x 4ft) panels• 25mm wide U-channel to hold the board’s edge• Heavy-duty all steel construction
Support £19.94 £16.62 100217 Inc.vat Ex.vat Code
Axminster Quick Support • Telescopic pole adjusts
to ceiling height from 1,600mm to 2,900mm
• Rubber feet prevent the pole from slipping out of position
• Suitable for holding up plaster board whilst fi xing
• Use dust sheets to curtain off a working area
16_Building 470_484.indd 473 29/11/2013 12:48
474
16
Section
axminster.co.uk/signup for our exclusive email offersCall 03332 406406
Dry Lining
Axminster Drywall Screw Adaptors
Adaptors (Pkt 5) £2.94 £2.45 600446 Inc.vat Ex.vat Code
Drywall Screw Adaptors
Joint Knife Set £10.74 £8.95 403741 Inc.vat Ex.vat Code
Joint Knife Set
100mm £6.95 £5.79 367119 150mm £7.94 £6.62 367157
Inc.vat Ex.vat Code
Marshalltown Joint Knives
Marshalltown
Marshalltown Taping Knife
200mm £9.44 £7.87 600328 300mm £10.94 £9.12 600331 250mm Stainless Steel £11.45 £9.54 600330
Inc.vat Ex.vat Code
325 x 75 x 85mm £4.34 £3.62 600343 Inc.vat Ex.vat Code
Marshalltown Mud Pan
MarshalltownDrywall Finishing Trowel
275 x 115mm £26.94 £22.45 600311 Inc.vat Ex.vat Code
100 x 125mm £11.94 £9.95 597295 Inc.vat Ex.vat Code
Marshalltown Internal Corner Trowel
Sponge £3.05 £2.54 364675 Inc.vat Ex.vat Code
Marshalltown Drywall Sanding Sponge
234 x 83mm £19.44 £16.20 202511 Mesh Sheets 120g (Pkt 5) £7.25 £6.04 202512
Inc.vat Ex.vat Code
Saw 150mm £8.15 £6.79 597173 Inc.vat Ex.vat Code
Marshalltown Rock Warrior Saw
Saw 170mm £9.44 £7.87 210040 Inc.vat Ex.vat Code
Axminster Drywall Saw
Joint Knife Set Marshalltown Drywall Rasp
Rasp £8.64 £7.20 202322 Inc.vat Ex.vat Code
Trolley £169.94 £141.62 700161 Inc.vat Ex.vat Code
Axminster Board Moving Trolley Axminster Board Moving Trolley
Door Lifter £17.94 £14.95 504064 Inc.vat Ex.vat Code
Trend Door Lifter
Marshalltown Drywall Vacuum Sander
• Control the door with your foot leaving both hands free• Slides under door and stays fl at and stable• Capable of lifting up to 38mm high• Maximum weight of door 108kg• Cam design with an internal steel weight keeps it level• Virtually unbreakable, non-marring• Hanging hole for storage
• Large ribbed rubberised grip• Coarse teeth prevent clogging• Sharp pointed tip for rapid initial penetration
• 170mm heavy duty blade with Japanese style teeth• Soft grip handle• Supplied with tooth protector
• Stainless steel blade • Will not clog• Guide rails keep the rasp on the edge• Durasoft handle
• Narrow enough to go through a standard doorway• Easy handling of sheet materials• Two swivelling castors for excellent manoeuvrability• Heavy duty tubular steel frame
• Converts drill driver into drywall screw gun• Phillips head• Zinc plated safety depth shield• Supplied in packs of 5
• Soft Grip handles for comfort• Flexible blades• Integral nail pushers in handle• 1 x 100mm, 1 x 150mm
• Flexible steel blades• Durasoft handles for comfort• Metal ends for knocking back nail heads
• Wide fl exible blued steel blades• Rustproof aluminium spine• Durasoft handle for comfort
• For mixing drywall joint compound and other fi llers• Plastic body with metal insert
• Trowel for feathering drywall joints• Slightly concave base• Perfect for producing hidden joints• Size 275 x 115mm
• Flexible stainless steel blade• Gives a perfect tight corner every time
• Virtually dust free sanding of drywall• Double sided• Simple to keep clean
Inc.vat Ex.vat Code
• Gives a perfect tight corner every time
• Pivoting elbow keeps hose out of the way • Adjustable vent allows for variable vacuum force• Low profi le knobs• Durable sanding pad for a smooth fi nish• Three comfortable sanding positions• Supplied with 300mm hose 31.75mm bore hose, vacuum sander
and one sheet 120 grit mesh sanding screen
Joint Knife Set
Trolley
• Soft Grip handles for comfort
16_Building 470_484.indd 474 29/11/2013 12:50
475
16
Order online axminster.co.uk/building
Dry Lining
230 x 82mm £10.44 £8.70 600317 Mesh Sheets 120g (Pkt 5) £7.25 £6.04 202512
Inc.vat Ex.vat Code
Marshalltown Hand Sander
Pole Sander £15.95 £13.29 403888 Mesh Sheets 120g (Pkt 5) £7.25 £6.04 202512
Inc.vat Ex.vat Code
Pole Sander
Dry Lining
Pole Sander + Handle £17.45 £14.54 600322 1,220mm Handle Only £6.74 £5.62 600323 Mesh Sheets 120g (Pkt 5) £7.25 £6.04 202512
Inc.vat Ex.vat Code
Marshalltown Universal Joint Pole Sander
Paper Hanging
This is your standard folding trestle table 1,600mm(L) x 670mm(W) x 760mm(H) with an 18mm thick plywood top with a host of uses around the home and workshop. The tubular steel legs fold out and lock securely in position to form a stable platform. If heavy objects are placed on the table extra support may be needed; position an Axminster Lightweight Folding Trestle (900319) in the centre.
This is your standard folding trestle table 1,600mm(L) x 670mm(W)
Folding Table
Folding Table £49.94 £41.62 900346 Trestle (1) £11.45 £9.54 900319
Inc.vat Ex.vat Code
The 40mm wide nylon roller is just the thing for perfect seams and, with the axle only projecting on one side of the J roller, it can reach right into corners if necessary with the other. Large hardwood handle for fi rm grip. Solid nylon roller couldn’t be easier to clean.
Roller 40mm £8.94 £7.45 510273 Inc.vat Ex.vat Code
Nylon Seam Roller
• Large easily gripped handle• Thumbscrews secure abrasive• 6mm foam cushion attached to aluminium base
• Cast aluminium sanding head• Extendable twist-n-lock
aluminium handle (700 to 1,220mm)
• Universal joint to ensure head stays in contact
• 240 x 85mm plate with foam backing
• Sand any part of a room, from fl oor to ceiling• Lightweight cast aluminium• 1,200mm handle available separately
Marshalltown Hand Sander
Marshalltown Universal Joint Pole Sander
• Large easily gripped handle • Sand any part of a room, from fl oor to ceiling• Lightweight cast aluminium
Dry Wall Board Lifter £199.94 £166.62 505093 Inc.vat Ex.vat Code
Drywall Panel Lifter
Mesh Sheets 120g (Pkt 5) £7.25 £6.04 202512
The Axminster Hydraulic Drywall Panel Lifter is made from an all welded steel construction and can be used by one person. It is by far the easiest way to install a sheet of plasterboard single-handed onto a ceiling. It is controlled by a hydraulic ram and cable system. The ram is operated by a foot pump and it is exceptionally easy to raise and adjust the height of the board. Descent is controlled by a hand operated valve, which is very sensitive, giving a fi ne level of control. The tilting cradle brings the loading height down to a manageable 1m. It is then raised using the winch to the required height. It enables plasterboard sheet to be positioned on walls and sloped or level ceilings. The Lifter has a maximum lifting height of 3.35m(11’) and can hold up to a 1,200 x 4,800mm (4’ x 16’) single sheet (max weight 40kg). Mounted on three castors with a 1m splay for stability, it is highly manoeuvrable. The Lifter is quick to assemble and disassemble using no tools, making it easy to transport from job to job. Full instructions are included. We recommend this is only used for positioning single sheets of plasterboard prior to fi xing.
Hydraulic Drywall Panel Lifter
Hydraulic Dry Wall Board Lifter £249.95 £208.29 505094 Inc.vat Ex.vat Code
Drywall Panel Lifter
The Hamilton Prestige paperhanging brush has stiff natural bristles with a softer bristle outside for a combination of strength and softness. It has a comfortable beech handle with a grooved fi nger slot for ease of use. All these features result in a professional standard of paperhanging brush.
Prestige Paperhanging Brush £14.45 £12.04 504692 Inc.vat Ex.vat Code
Hamilton Prestige Paperhanging Brush
These scissors have fi nely ground and, most importantly, stainless steel blades. The scissors are 300mm(12”) in length and the inner surface of the fi nger loops are fi tted with a soft comfort grip.
Paper Hanging Scissors
Scissors 300mm £5.75 £4.79 583734 Inc.vat Ex.vat Code
• One person can easily handle and install a full sheet of plasterboard
• Easily lifts plasterboard sheet up to a height of 3.35m (11’)• Three legged base for maximum stability• Braked, non-marking castors allow easy positioning• Quickly and easily assembled and disassembled for
transportation• Maximum carrying capacity 40kg
Foot Pump
16_Building 470_484.indd 475 29/11/2013 12:51
476
16
Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95Call 03332 406406
Coving, Filling & Stripping
A simple device that takes all of the guesswork out of cutting plaster coving. Unlike other mitre blocks the Wonder Mitre sits on the inside of the cove and has shaped notches that fi t the coving holding it fast whilst the material is being cut. Suitable for all coving up to 125mm the Wonder Mitre is cleverly angled making the cutting of angles exceptionally easy. So if your walls are reasonably square there will be very little fi nishing needed to create perfect mitres every time. Supplied with comprehensive instructions.
Wonder Mitre £8.94 £7.45 304627 Inc.vat Ex.vat Code
Wonder Mitre
Sometimes it is the simplest things that are the best. Take for instance, this fl exible cup from Austria, 145mm diameter by 50mm deep. Just enough space to mix small quantities of plaster or fi ller for repairs. Now here’s the good bit, don’t worry about cleaning, when the unused fi ller dries squeeze the cup and it will all fall away. No more hunting around for odd scraps of sheet material or using the best china saucers.
Mixing Cup 145mm £1.94 £1.62 595739 Inc.vat Ex.vat Code
Plaster/Filler Mixing Cup
Mixing Cup 145mm
Similar to the stripping knives but with highly fl exible spring-tempered blades. Used for applying and smoothing fi ller into holes or cracks.
38mm £9.95 £8.29 400424 50mm £10.14 £8.45 400425 75mm £11.75 £9.79 400426
Inc.vat Ex.vat Code
Professional Filling Knives
A simple device that takes all of the guesswork out of cutting
Wonder Mitre
Sometimes it is the simplest things that are the best. Take for
Coving, Filling & Stripping
One of those products you wish you’d found years ago. More than a mere scraper, these are so useful and versatile, built to tackle a wide range of scraping tasks. Stiff stainless steel skewed blade, 2mm thick with a single bevel. White oak scales form the handle riveted to a through tang. Fitted with a steel hammer button and provided with a hanging hole. Available in either 70mm or 90mm widths.
Japanese Heavy Duty Skewed Scraper
70mm £13.25 £11.04 202312 90mm £16.74 £13.95 202313
Inc.vat Ex.vat Code
£11.75 £9.79 400426
One piece urethane moulding, light but extremely strong with smooth, easy to clean surface. This 150mm square hawk is perfect for small plastering and fi lling jobs.
150 x 150mm £7.64 £6.37 595303 Inc.vat Ex.vat Code
Handy Urethane Hawk
Made for the professional tradesman, with high quality spring-tempered steel blades, solid bolsters, scale tangs and riveted rosewood handles.
25mm £9.05 £7.54 400421 50mm £9.24 £7.70 400422 75mm £9.95 £8.29 400423
Inc.vat Ex.vat Code
Professional Stripping Knives
With their razor sharp blades and angled head for a shearing action these tools are ideal for stripping wallpaper, vinyl fl oor tiles etc. The tubular steel handle has a rubberised grip and the die cast alloy blade clamp safely secures a sharp disposable blade. Can also be used as scrapers for cleaning fl oors, glass and tiles. There are two sizes available: 350mm length with 100mm blade and 470mm length and 150mm blade. Note for storage and transportation the blade is reversed in the head clamp.
Harris Professional Super Strippers
Stripper 100mm £5.94 £4.95 611052 Replacement Blades 100mm (Pkt 10) £1.55 £1.29 502958 Stripper 150mm £8.15 £6.79 611053 Replacement Blades 150mm (Pkt 2) £2.94 £2.45 611093
Inc.vat Ex.vat Code
Decorator’s Sundries
A top quality decorator’s masking tape for all general decorating purposes. This high quality product should not be confused with cheap and cheerful masking tapes. Also excellent for sticking down most things in the workshop when you can fi nd no other tape! All rolls are 50m long.
24mm x 50m £1.64 £1.37 950377 36mm x 50m £1.94 £1.62 950378 48mm x 50m £2.84 £2.37 950379
Inc.vat Ex.vat Code
A masking tape for textured and wallpapered surfaces. Easily repositioned, 24mm wide by 50m long.
Low Tack Masking Tape £1.85 £1.54 951003 Inc.vat Ex.vat Code
Low Tack Masking Tape
Masking Tape - 50m
Originally made for artists, these palette knives have a home in many tool kits. The stainless steel blades have a mirror-fi nish polish and are super fl exible. The blades taper from about 1.5mm at the tang to a mere 0.2mm at the tip. These are perfect for cutting glue into fi ne cracks, applying fi ller or even to paint in tight spaces where a brush would be too messy. Four shapes give you plenty of options. Each blade has a brass ferrule and hardwood handle. The blades range from 16 to 32mm wide.
Palette Knife Set (4 Pce) £10.14 £8.45 502371 Inc.vat Ex.vat Code
Chestnut Tools Palette Knife Set
FrogTape Multi-Surface 24mm £6.24 £5.20 117006 FrogTape Multi-Surface 36mm £7.44 £6.20 117007 FrogTape Delicate 24mm £6.44 £5.37 117008 FrogTape Delicate 36mm £7.74 £6.45 117009
Inc.vat Ex.vat Code
• The only painter’s tape with exclusive PaintBlock Technology• Prevents paint from bleeding by forming a micro-barrier along
the edges• Results in the sharpest paint lines possible• Multi-surface for use on cured painted walls, wooden trim, glass
and metal• Delicate on freshly painted walls, faux fi nishing, wallpaper and
primed plasterboard• 41.1m(133ft) rolls
Shurtape FrogTape Masking Tape
Carpet protector fi lm is a low tack adhesive fi lm made of tough polythene designed to protect carpets without creating a trip hazard. It must be renewed every four weeks (not suitable for thick pile carpets). Protection against decorating spills and high foot traffi c when moving house. Suitable for stair carpets. Simple and fast installation and removal. 600mm x 25M Roll.
Protector 600mm x 25m £13.74 £11.45 152570 Inc.vat Ex.vat Code
Faithfull Carpet Protector 600mm x 25m
16_Building 470_484.indd 476 29/11/2013 12:52
477
16
Order online axminster.co.uk/building
Decorator’s Sundries
400g £4.74 £3.95 610639 Inc.vat Ex.vat Code
The stockinette roll is the best material for hand buffi ng wax polish, the open texture picking up excess wax leaving a smear-free shine. Simply cut off a length, and you always have a clean rag to hand.
Before decorating commences ensure that what can’t be removed is protected. This roll of strong polythene 50m long by 2m wide protects furniture and carpets, paint will not penetrate. Warning do not walk on polythene as it could be slippery.
Dust Sheet £5.75 £4.79 029006 Inc.vat Ex.vat Code
Dust Sheet On a Roll
This dust sheet, made of heavy duty unbleached cotton, is huge, 3.65m(12’) x 2.75m(9’) and will cover just about everything. Forget trying to make do with old curtains and duvet covers, this will last for years and is a really sound investment.
H/D Dust Sheet £15.95 £13.29 310185 Inc.vat Ex.vat Code
Heavy Duty Cotton Dust Sheet
Bigmouth Dust Pan
Dust Pan £19.94 £16.62 340941 Brush 270mm £4.74 £3.95 902001 Pan & Brush Set £23.45 £19.54 719522
Inc.vat Ex.vat Code
Tarpaulin Included just in case there is the possibility of some inclement weather. The tarpaulin is 3.7m(12’) x 2.8m(9’), suffi cient to cover materials stored outdoors, freshly laid concrete or cement, or to form a temporary shelter. It is made from cross woven polyethylene with eyelets at the corners and along its reinforced edges; very strong, durable, rot proof and, more importantly, weatherproof. To accompany the ‘Tarp’ is a 50m coil of blue 8mmdiameter poly rope, to tie everything down just in case the wind should pick up.
Tarpaulin 3.7m x 2.8m £5.45 £4.54 599341 Poly Rope 8mm x 50m £18.46 £15.38 599551
Inc.vat Ex.vat Code
Stockinette Roll
The Dusting Brush is just that, a traditional painter’s dusting brush, equally at home on the bench. 100mm wide, with 70mm long pure white china bristle set in a beech wood stock with a turned beech wood handle.
Dusting Brush £10.44 £8.70 610637 Inc.vat Ex.vat Code
Professional Dusting Brush
Tarpaulin Included just in case there is the possibility of some inclement
Bigmouth Dust Pan
This is the best version of this very handy tool we have so far come across. It utilises a standard heavy duty utility knife blade. The one piece moulded plastic handle includes storage for spare blades and a detachable blade guard/insertion tool. Comes with 6 blades.
Window Scraper w/Blade Storage
Scraper £2.04 £1.70 701385 Blades H/D (Dispenser 10) £00.98 £00.82 286003
Inc.vat Ex.vat Code
Window Scraper w/Blade Storage
The 9 in 1 is designed to carry out a variety of tasks such as scraping, stripping, opening paint cans, pulling small nails, screwdriving, roller combing, etc. In fact the only task it appears incapable of is making the tea.
9 in 1 Tool £9.24 £7.70 403758 Inc.vat Ex.vat Code
9 in 1 Painter’s Tool
A pressed steel paint kettle with parallel sides, used to carry a handy amount of paint required to do the job in hand. It also means there is less to spill and less to carry about, especially handy if you bought a trade amount of paint.
Metal Paint Kettle
Kettle £6.84 £5.70 202436 Ladder Hook £2.45 £2.04 583874
Inc.vat Ex.vat Code
An ‘S’ shaped hook with a large diameter hook on one end to attach to the rung of ladders or steps, and a smaller one to hook to the handle of the paint tin. Between the hooks is a sprung fl exible section. The paint can hangs conveniently and correctly, leaving one hand to hold onto the ladder whilst the other guides the brush, by far the safest way.
Harris Paint Can Ladder Hook
AxminsterRetractable Razor Scraper A slim pressed steel body with a retractable blade holder. The scraper uses single edge razor blades that are easily changed just by sliding into the holder from the side. N.B. Extremely sharp edges, exercise great care, use pliers to be extra safe when changing the blade and always retract the blade when not in use. Supplied with one blade, spare blades available separately in packs of 5.
Razor Scraper £1.85 £1.54 341163 Replacement Blades (Pkt 5) £1.25 £1.04 341164
Inc.vat Ex.vat Code
Retractable Razor Scraper
Painter’s Pyramids are exceptionally useful tools. They elevate your work off the bench top. With minimal contact they allow painted, stained or sprayed projects to be completed in one session with less mess and better results. It means you can fi nish both sides of a workpiece without waiting for the fi rst to dry. You get better access to the edges, ensuring cleaner results and eliminating the problem of a project sticking to the work surface (like a newspaper). The Painter’s Pyramid features a lock and tab system allowing pyramids to be easily secured to a work surface or each other. Pyramids nest for easy storage. 50mm tall, they can support a weight of up to 90kg. Supplied in packs of 10.
Painter’s Pyramids (Pkt 10) £5.45 £4.54 951789 Inc.vat Ex.vat Code
Painter’s Pyramids
A specially formulated liquid which will remove hardened, dried paint or varnish from brushes and rollers. Armed with a bottle of this, you never need buy another brush, as most people are only too pleased to give away brushes in this state.
250ml £3.35 £2.79 263000 Inc.vat Ex.vat Code
Rustins Brush Restorer
Ex.vat Code
Kettle Ladder Hook
Size 8 (M) £2.94 £2.45 211763 Size 9 (L) £2.94 £2.45 211764 Size 10 (XL) £2.94 £2.45 211765
Inc.vat Ex.vat Code
• All weather glove - multi use, excellent grip• Palm coated nitrile knitted nylon• Excellent grip even in the wet• Seamless for comfort and dexterity• Oil and grease resistant, coated with nitrile rubber• High tear and puncture resistant level 3• High abrasion level 4. Cut level 1• EN388 (4 1 3 3)
uvex Unipur 6634 Nitrile Work Gloves
• Has a variety of uses in the garden as well as the workshop• Fine acrylic bristles• Available individually or as a set
16_Building 470_484.indd 477 29/11/2013 12:53
478
16
axminster.co.uk/signup for our exclusive email offersCall 03332 406406
Paint Brushes & Rollers
These professional quality brushes use bristles made with DuPont™ synthetic fi laments. The fi laments taper to give the best fl ow characteristics, brush lines and exceptional cutting-in control. The brushes give superb results with acrylic or water-based paints and modern varnishes. The wooden beaver tail handle is plain, sanded smooth, comfortable and suitable for vapour boxes. The ferrule is stainless steel. The pack of three contains one each: 25, 37 and 50mm.
Squirrel Mixers feature a unique cage design. Ideal for use in a variable speed cordless drill, they use a vortex mixing action that pulls liquid simultaneously from the top and bottom. The result is an astoundingly fast and thorough mix. The round polypropylene cage will not damage the paint can. They perform brilliantly in many different liquids including paints, stains, varnishes, wall textures, joint compounds, adhesives and more. The 70 x 50mm Squirrel Mixer is capable of fully mixing 4 litres of paint in less than 10 seconds, and has a detachable base allowing its use in as little as 1 litre. Overall length is 260m. The PolyPro Squirrel Mixers feature a rust proof steel shaft with cages of tough durable polypropylene. They are very easy to clean, after mixing place in cleaning solution (water or solvent) and spin (if you have a reversible drill use both directions) the mixer cleans as fast as it mixes.
Mixer £9.24 £7.70 951000 Inc.vat Ex.vat Code
PolyPro Squirrel Paint Mixers
Paint Brushes & Rollers
Squirrel Mixers feature a unique cage design. Ideal for use in a variable speed cordless drill, they use a
PolyPro Squirrel Paint Mixers
Contains 12 of each size, 25mm, 38mm, 50mm. Great for applying glue, stains and general workshop use. Superb value thirty six times over. Keep these handy for that time when you need a brush for an odd job that might ruin your good brushes. If you spoil one of these it isn’t going to hurt; reasonable quality brushes at a real value for money cost.
Brush Set (36 Pce) £14.94 £12.45 600580 Inc.vat Ex.vat Code
36 Piece Assorted Paint Brush Set 36 Piece Assorted Paint Brush Set
Delta Brush 13mm £1.94 £1.62 502282 Delta Brush 25mm £2.75 £2.29 502283 Delta Brush 37mm £3.84 £3.20 502284 Delta Brush 50mm £5.45 £4.54 502285 Delta Brush Set of 3 £10.94 £9.12 502286
Inc.vat Ex.vat Code
Harris T-Class Delta Synthetic Paint Brush
Fitted with a bright yellow plastic handle, easy to clean and easily seen. The brush has good length bristles, which are a mixture of natural and hard wearing synthetic fi bres. For all types of masonry paint and suitable for use on smooth or rough surfaces.
Brush 100mm £5.24 £4.37 610629 Inc.vat Ex.vat Code
Harris Classic Masonry Paint Brush
These brushes are absolutely superb for cutting-in, painting in a corner or up against an edge. The shape helps to impart great control. Long hardwood turned handles with hanging hole for drying after cleaning. The 21mm and 25mm have a bridle wrap for better control and longer life. Vapour box compatible. The pack contains one each 15, 18 and 21mm.
Sash Brush 15mm £2.45 £2.04 951094 Sash Brush 18mm £3.54 £2.95 951095 Sash Brush 21mm £5.24 £4.37 951096 Sash Brushes Pack of 3 £9.44 £7.87 951098
Inc.vat Ex.vat Code
Hamilton Prestige Sash Brushes
Made with an innovative DuPont™ fi lament formulation, easy clean and long lasting. Fixed with Hamilton’s patented Thermoset™ bonding, special resin-bond system to minimise fi lament loss. Unique deep-fl agging technology simulates natural ‘split’ bristles for the best paint pick-up and better paint spread. The fi lament tips are ground and sanded for the fi nest fi nish and increased paint fl ow. This treatment helps to reduce tram-lines in water-based coatings for a smoother fi nish. Forest Stewardship Council (FSC) certifi ed wooden handles from environmentally managed sources. Made in the UK.
Perfection Synthetic Brush 19mm(3/4”) £3.95 £3.29 951087 Perfection Synthetic Brush 25mm(1”) £5.45 £4.54 951088 Perfection Synthetic Brush 37mm(1.1/2”) £7.64 £6.37 951089 Perfection Pure Synthetic Brush 2” £12.95 £10.79 504694
Inc.vat Ex.vat Code
Hamilton Perfection Pure Synthetic Paint Brushes
The unique oval shape makes these good for profi led surfaces. Hand crafted, they are also suitable for varnish or wood stain. The head is extra thick of 100% selected pure satin tipped natural bristle for maximum pick-up. Set with a patented Thermoset™ process for absolute minimum bristle loss. An extra strong seamless ferrule ensures long life and added security. This brush is hand-crafted for the very best results. Fitted with a varnished wooden handle. Vapour box compatible. Made in the UK.
Namel Var 25mm(1”) £7.04 £5.87 951071 Namel Var 50mm(2”) £11.94 £9.95 951073
Inc.vat Ex.vat Code
Hamilton Namel Var Brushes
Hamilton Perfection brushes have been the number one choice of professionals for many years. Their unique bristle formulation uses a blend of the fi nest natural bristles, triple boiled to retain the head shape. These are fi xed by Hamilton’s patented Thermoset™ bonding, a special resin-bond system for maximum head retention. This minimises bristle loss and prevents any liquid leaking into the cavity. The bevel trim and satin tip bristles ensure the best fi nish and clean cutting-in. Wooden Kaiser handles are Forest Stewardship Council (FSC) certifi ed from environmentally managed sources. These have a four coat varnish fi nish. All Perfection brushes are compatible with vapour boxes. Made in the UK.
Perfection 19mm(3/4”) £3.95 £3.29 951079 Perfection 25mm(1”) £5.45 £4.54 951080 Perfection 37mm(1.1/2”) £7.64 £6.37 951081 Perfection 50mm(2”) £12.74 £10.62 951082
Inc.vat Ex.vat Code
Hamilton Perfection Pure Bristle Paint Brushes
These top-end trade quality paint brushes feature an extra thick head of 100% pure black China bristle for maximum paint pick-up. The bristles are set with Hamilton’s patented Thermoset™ process for long life. The ferrule is stainless steel for maximum rust resistance. The wooden beavertail shaped handle offers comfort and control. Made in UK. The pack of 3 comprises one each of 25(1”), 37(1.1/2”) and 50mm(2”) brushes. The pack of 5 contains 1x 25mm(1”) and 2x 37mm(1.1/2”) and 2x 50mm(2”).
Prestige 25.4mm(1”) £3.74 £3.12 504682 Prestige 37mm(1.1/2”) £4.25 £3.54 504683 Prestige 50mm(2”) £7.44 £6.20 504684 Prestige 75mm(3”) £15.74 £13.12 504685 Prestige Pack of 3 £14.45 £12.04 504686 Prestige Pack of 5 £19.94 £16.62 504687
Inc.vat Ex.vat Code
Hamilton Prestige Paint Brushes
A high quality brush designed for window frames. It is slant cut and bevelled making it ideal for cutting-in. This brush features a natural bristle and synthetic fi lament blend for good paint pick-up, good spreading rates and a fi ne fi nish. Vapour box compatible with a wooden handle and a stainless steel rust resistant ferrule.
Window Brush 19mm(3/4”) £0.95 £0.79 504693 Inc.vat Ex.vat Code
Hamilton Performance Window Brush
16_Building 470_484.indd 478 29/11/2013 12:54
479
16
Section
*SAVE with a bulk discount – see online axminster.co.uk or call 03332 406406
Cold Chisels & Bolsters
For longer reach or outdoor work the three-section aluminium extension pole extends from 1.2m to 3m. It can be locked at any length using a twist lock system. Manufactured from aluminium tube it is light weight and yet remains suffi ciently rigid when fully extended. Again removing the taper adaptor exposes a thread. N.B. These threads also fi t Drywall sanders.
A professional decorator’s 230mm, 5 wire roller cage. Suitable for all 44mm(1.3/4”) x 229m(9”) roller sleeves. The handle is stained and varnished beech wood, with a steel ferrule and internal thread for secure attachment to an extension pole. Recommended to be used with Harris microfi bre roller sleeves listed.
Harris T-Class Roller Cage
Roller Cage 230mm £6.24 £5.20 610630 Short Pile Sleeve £4.25 £3.54 610631 Medium Pile Sleeve £4.74 £3.95 610632
Inc.vat Ex.vat Code
Extension Pole for Rollers
1.2m to 3m £15.95 £13.29 610636 Inc.vat Ex.vat Code
Solid forgings from high quality hexagon steel bar. Correctly hardened and tempered.
13mm x 150mm £2.45 £2.04 220056 19mm x 250mm £4.94 £4.12 220058
Inc.vat Ex.vat Code
Axminster Cold Chisels
It has a 220mm long working length (370mm overall) with a 5mm thick by 25mm wide blade. This chisel is specifi cally made for removing single bricks cleanly and effi ciently without damage to the surrounding masonry, in order to fi t air bricks, vents etc. The secret lies in the hardening process, something the Ansell forge in Sheffi eld are expert at. The long length means you can even remove individual large and thick blocks leaving a clean well fi nished job. Domed head for safety, also available fi tted with a hand guard. Made in Sheffi eld UK.
Brick Removing Chisel
Chisel £10.94 £9.12 211853 Chisel with Hand Guard £13.94 £11.62 211854
Inc.vat Ex.vat Code
This is a lightweight and robust tower unit designed for use by one person. Use it indoors for those jobs where you don’t want to be constantly repositioning a stepladder. The Handy Scaffold Platform gives you a wider reach and with its four locking, swiveling castors is much more manoeuvrable. The simple assembly requires no tools, just unfold, lock into place, fi t the boards and the Handy Scaffold Platform is ready to use, all set up in less than 10 seconds. It will easily fi t through doors, it is very useful for internal decorating, repair or maintenance work. Strong non-slip fi nished steel boards clip onto the bars providing rigidity and have a max load of 227kg (35 stone 10lbs). There are two boards (150mm & 250mm) each with a working width of 1,000mm. You can combine them to make a single level or have one set lower as a step-up. The choices of platform heights are 300mm(12”), 600mm(24”) and 900mm(36”). The unit folds to almost a fl at-pack for storage or transportation, to just 125mm deep. Open dimensions length 1,100mm, width 550mm, height 1,280mm, closed width 565mm, depth 125mm, height 1,280mm.
Axminster Handy Mobile Scaffold Platform
Model Mobile Saffold Platform Max Load 227kg Rungs - Length of Ladder - Height Step Ladder 300 or 600mm Transport Dimensions 565 x 125 x 1,280mm Weight 23.5kg
Mobile Scaffold Platform £74.94 £62.45 211893 Inc.vat Ex.vat Code
Very fi nely made mason’s chisels with heavy 25mm hexagon forged steel shafts, hardened, tempered and ground. The range includes the mason’s chisel - 38mm(1.1/2”) wide to shape and remove bits that shouldn’t be there; the bolster or nicker - 63mm(2.1/2”) wide to split blocks or smooth wide fl at surfaces. Finally, the pitching tool, this has a forged blade so that the back is fl at and the 63mm(2.1/2”) wide blade is bevelled on one side only, used to remove excess stone and facing.
Mason’s Chisel
Mason’s Pitcher
Mason’s Bolster
Mason’s Chisels
Chisel 38mm(1.1/2”) £8.54 £7.12 111057 Bolster 63mm(2.1/2”) £10.25 £8.54 111058 Pitcher 63mm(2.1/2”) £10.94 £9.12 111059
Inc.vat Ex.vat Code
Folds fl at for transportation
Mason’s points with tapered ends, hand forged from19mm hexagon high carbon steel. Hardened, tempered and ground, they are suitable for marble and softer stone. Available in either 6mm(1/4”) or 10mm(3/8”) width, both are 215mm long. These are used for lettering and detail work.
6mm(1/4”) £5.94 £4.95 502378 10mm(3/8”) £5.94 £4.95 502377
Inc.vat Ex.vat Code
Mason’s Points
Farenheit Goggles - Clear £6.44 £5.37 952373 Inc.vat Ex.vat Code
• Protection from impact, liquids and dust• Soft PVC crystal frame with wide support area enhances comfort• Can wear with prescription glasses, or respirator• Anti-fog (indirect venting). Anti-scratch coated lenses• Medium impact protection (B), optical class 1 and UV protection• Supplied with micro fi bre storage pouch/cleaning cloth
3M Fahrenheit Comfort Goggles
16_Building 470_484.indd 479 29/11/2013 12:55
480
16
Section
Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95Call 03332 406406
Tiling
The narrower blade and margin trowel style allow grouting to be applied more easily in restricted areas. Suitable for all smaller tiling jobs, the resilient white rubber base is hardwearing and non-marking. A strong steel tang is fi tted with a wooden handle. Blade size 150 x 50mm.
A variety of Tungsten Carbide replacement Hacksaw blades.
Grit Edge Hacksaw Blade 300mm £5.75 £4.79 910292 Carbide Rod Blade 300mm £5.24 £4.37 910291
Inc.vat Ex.vat Code
Tungsten Carbide Saw Blades
From one of the UK’s leading manufacturers of carbide tipped boring tools. These tile cutting nippers feature strong and extra hard Tungsten tipped jaws and sprung handles. Black lacquered fi nish with red plastic dipped handles. They are an excellent tool for cutting narrow strips or trimming and shaping tiles upto 10mm thick, to fi t around plumbing fi xtures. They can be used on both normal ceramic wall and porcelain fl oor tiles. Length 210mm.
Armeg Porcelain Tile Cutting Nippers
Nippers £13.44 £11.20 210921 Inc.vat Ex.vat Code
Large contoured handle fi ts comfortably in the palm of the hand. The 190mm(7.1/2”) long blade has 6mm(1/4”) square notches. Use for fast application of adhesive. Moulded plastic construction is easily cleaned after use.
Spreader £1.44 £1.20 015111 Inc.vat Ex.vat Code
Vitrex Large Spreader
A professional 6.3mm square notched trowel with Durasoft handle for comfort which does not deteriorate in use and can be washed without detriment to the surface of the handle. Suitable for all types of tile adhesive, the trowel is made of carbon steel 290 x 110mm with 6.3mm square grooves.
290 x 110mm £14.15 £11.79 357080 Inc.vat Ex.vat Code
Marshalltown Notched Trowel
Carbide tipped drills with a spade shaped tip for boring through glass or ceramic tiles. Set of 5 contains sizes 3mm, 5mm, 6mm, 8mm and 10mm.
Set of 5 Bits £6.74 £5.62 500282 Inc.vat Ex.vat Code
Glass & Tile Drill Bits
The use of hard porcelain tiles is becoming increasingly common; normally this type of tile is exceedingly diffi cult to drill. These bits developed by Armeg of Sheffi eld have a carefully designed tip geometry and use a specially selected grade of tungsten carbide for the cutting tip, diamond lapped to give the optimum performance. Ensure a constant supply of cold water directly to the tip and run at a speed of 700 to 900rpm, rotary only.
6mm £24.95 £20.79 198017 7mm £27.44 £22.87 198088
Inc.vat Ex.vat Code
Armeg Porcelain Tile Drills
The Armeg PTC diamond tile drill bits are designed to drill into hard ceramic tiles and other hard materials such as granite and marble with a fast and clean cutting action. These bits can be used with cordless drills, a water feed system is available to lubricate the edge whilst drilling (ensure used with a circuit breaker on corded drills). The tough diamond raised sintered head gives accurate drilling and makes it easy to start the hole with no wander, whilst the open head design allows the water to cool effectively and the ejection slots enable easy removal of material. Available in a range of sizes.
Armeg PTC Diamond Grit Tile Bits
6mm £15.44 £12.87 952239 7mm £16.44 £13.70 952241 8mm £16.94 £14.12 952242 10mm £17.94 £14.95 952243 12mm £19.94 £16.62 952244 15mm £20.94 £17.45 952245 20mm £21.95 £18.29 952246 25mm £26.45 £22.04 952247 30mm £30.95 £25.79 952248 35mm £35.45 £29.54 952249 PTC Water Feed Unit 6-35mm £3.44 £2.87 952334
Inc.vat Ex.vat Code
Professional TCT glass drills sharpened by diamond lapping machines. Especially produced for intensive use, they are therefore more than adequate for occasional use. Always remember to drill at very slow speed preferably with a hand brace and if possible use the old trick of an oil fi lled plasticine well around the drill point. 4mm Glass/Tile Drill £3.65 £3.04 509004 5mm Glass/Tile Drill £4.04 £3.37 509005 10mm Glass/Tile Drill £5.94 £4.95 509010
Inc.vat Ex.vat Code
Professional Glass & Tile Drills
Grouting Tool £5.94 £4.95 401563 Inc.vat Ex.vat Code
Handy Grouting Tool The narrower blade and margin trowel style allow grouting to be applied more easily in restricted areas. Suitable for all smaller tiling jobs, the resilient white rubber base is hardwearing and non-marking. A strong steel
wooden handle. Blade
Inc.vat Ex.vat Code
Handy Grouting Tool
This steel gauge has smaller diameter pins than the plastic versions and can therefore produce a more precise outline when being used for fi ne detail work. The length is 150mm(6”) and the maximum profi le depth is 45mm.
Short Handle £23.45 £19.54 702453 Inc.vat Ex.vat Code
Forged Tile Removing Tool
Axminster Steel Profi le Gauge
150mm £5.75 £4.79 388024 Inc.vat Ex.vat Code
Used to fi nd or measure a profi le or edge so that it may be transferred accurately onto the work to be cut. Manufactured in high quality plastic.
260mm £10.44 £8.70 340197 Inc.vat Ex.vat Code
Axminster Plastic Profi le Gauge
• Removes tiles fast and cleanly• One piece forging• Chrome Vanadium Steel• Fitted with safety grip
Self levels in seconds
Making something level has never been easier! This cross line laser provides an instant highly visible vertical and horizontal cross laser line also with tilt function, self-levelling in seconds with a range of up to 7m. It can be used for tiling, hanging frames, putting up shelves, dado or curtain rails - wherever you need a level line, the Quigo 2 is your answer! You can also use it on a slope with ease. Supplied with a clever fi xing bracket with a clamp that can be simply attached to many areas if there is no surface available. Ultra compact at only 65mm square. The on/off switch doubles as a protective cover for the laser which locks for transport. Fitted with 1/4” tripod thread. Supplied with fi xing bracket with click clamp plate and 2x 1.5V batteries. 2 year Bosch warranty.
Quigo 2 Cross Line Laser £44.94 £37.45 503772 Inc.vat Ex.vat Code
Bosch Quigo 2 Cross Line Laser
16_Building 470_484.indd 480 29/11/2013 12:56
481
16
Section
*SAVE with a bulk discount – see online axminster.co.uk or call 03332 406406
17
Tiling
Sealant Guns
A lower cost version of the professional Grouting Float. A curved plastic handle is fi xed to an aluminium plate. Onto this plate is bonded a softish foam pad, covered with a rubber base. The edges are bevelled and corners curved. This is an excellent tool for working grout into the tiles and wiping away the excess. 230 x 100mm.
Grouting Float £8.34 £6.95 810174 Inc.vat Ex.vat Code
Tile Grouting Float
Designed specifi cally for applying grout, this fl oat incorporates bevelled edges with two of the corners rounded, the other two square. The fl oat can cover a large area quickly and then remove most of the excess grout leaving very little residue to clean off. Size 230 x 100mm.
Grouting Float £14.75 £12.29 610097 Inc.vat Ex.vat Code
Marshalltown Grouting Float
incorporates bevelled edges
Marshalltown Grouting Float
This really is a great way to wash down tiles after grouting. The large 11 litre container has a roller at one end to wring the sponged fl oat out with and a lid with which to keep the whole kit tidy and to stop the residue emptying out indoors. Supplied with the kit is a handled sponge 290 x 140mm for cleaning off the residue.
£14.75 £12.29 610097
litre container has a roller
sponged fl oat out with and a lid with which to keep the whole kit tidy and to stop the
Tile Wash Kit £17.45 £14.54 302438 Inc.vat Ex.vat Code
Vitrex Tile Wash Kit
£17.45 £14.54 302438
A block of orange coloured natural rubber 130 x 90 x 45mm. Resilient and absorbent, it rapidly picks up traces of grout and aids clean up. Made in Austria.
Rubber Sponge £3.44 £2.87 419440 Foam Sponge £2.04 £1.70 419445
Inc.vat Ex.vat Code
Tiler’s Sponge Rubber
A super water absorbing foam sponge measuring 200 x 120 x 70mm. Also useful when hanging wallpaper. Made in Austria.
Tiler’s Sponge Foam
Double-ended fi nisher, one end for scraping excess grout and the other with a ball tip for giving a fi nal professional fi nish to grout lines.
Vitrex Grout Finisher
Grout Finisher £1.34 £1.12 910293 Inc.vat Ex.vat Code
Grout Removing Tool Two tungsten grit coated blades mounted side by side for the easy removal of discoloured or damaged grouting. The blades can either be used mounted in tandem (for grout lines of 3.5mm or greater) or individually on thinner grout lines (1.5mm or greater). A comfortable handle allows adequate pressure to be applied whilst reducing fatigue.
Grout Remover £3.24 £2.70 510071 Inc.vat Ex.vat Code
The 190mm(7.1/2”) long rubber blade can cover a large area in a relatively short time; it has a large easily held moulded grip.
Squeegee £2.04 £1.70 015110 Inc.vat Ex.vat Code
Vitrex Large Squeegee
Tiling
A plastic handle with a moulded rubber insert. Held at 45° the smoother is drawn slowly along the bead of sealant with the minimum of pressure leaving behind a professional looking, even fi nish. Excess sealant simply peels off the tool once dry. Apparently, fi ngers being licked before being used to smooth the bead are sometimes the cause of black mould appearing on the surface of sealant!
Sealant Smoother £2.15 £1.79 015112 Inc.vat Ex.vat Code
Vitrex Sealant Smoother
This manual sealant applicator caters for all the needs of the professional, taking both 310ml and 400ml cartridges. The heavy duty design allows for use with medium to high viscosity material. The gun has been engineered to have a life of many thousands of cartridges. The patented Pressure Relief Device can be turned on or off. On; it helps minimise any overfl ow, off; it allows a more continuous fl ow for a long even bead. The large aluminium cast trigger with a 12:1 ratio aids control. All parts made to the highest standards and of the material most suitable for the job.
Powerfl ow Sealant Gun £16.94 £14.12 951046 Inc.vat Ex.vat Code
Cox Powerfl ow Sealant Gun
Specifi cally designed for occasional use by the professional or home improvement enthusiast, these cartridge applicators are built to the same high standards as all Cox guns and represent excellent value for money. It is fi tted with a patented Pressure Relief Device which slightly backs-off the plunger when the trigger is released to help minimise any overfl ow.
Cox Easifl ow HD Sealant Gun
Easifl ow HD Sealant Gun £5.94 £4.95 951045 Inc.vat Ex.vat Code
Cox Easifl ow HD
If you have ever dispensed more than half a tube of mastic around windows or frames you will appreciate the simplicity and convenience of this very simple gun. At the touch of the trigger air pressure is applied to the back of the cartridge and out comes a very even fl ow of material. Be warned, however, that if the pressure is too high it tends to come out rather quickly! Suitable for use with virtually any small compressor fi tted with a reservoir. Saves a lot af arm ache! The tool is supplied with a 1/4” BSP bayonet connector. Please refer to the Airline Fittings section for details of suitable airlines and fi ttings.
Axminster B41 Air Caulk-Mastic Gun
Mastic Gun £20.94 £17.45 340448 Inc.vat Ex.vat Code
Squeegee £2.04 £1.70 015110
Silicone Scraper and Finishing Tool £11.94 £9.95 502384 Inc.vat Ex.vat Code
• Achieve a professional fi nish with silicone sealant • Two tough moulded tools• One strips away any old sealant with three options• Second tool features fi ve interchangeable rubber tips• A bead radius of 3, 6, 10, 13 or 17mm• Excess sealant simply peels off the tool once dry• Enclosed blade to open silicone tubes and nozzle
Silicone Sealant Scraper & Finishing Tool
Silicone Removing Tool £12.44 £10.37 502385 Inc.vat Ex.vat Code
• Makes removing silicone sealant simple• Quicker than chemicals, no mess or residue to
clean away• Sharp vee blade allows you to get into a 90°
corner• Old sealant bead comes away cleanly• Short, thin, fl exible blade lifts and removes any
stubborn bits• Stainless steel blades with a moulded
central grip• Overall length 200mm
Silicone Sealant Removing Tool
Ex.vat Code
• Short, thin, fl exible blade lifts and removes any
Silicone Sealant Removing Tool
16
17
Part of the Makita 18V family of Li-Ion tools this caulking gun takes cartridges and sausage packs of sealant and adhesives etc. Delivery is controlled by the speed dial and also variable speed trigger for very precise application depending on the situation and type of product being used. The tip has an anti-drip function to stop overspill, there is also an overload indicator and LED job light for dim areas. Body only, it takes Makita 18V Li-Ion battery pack.Supplied with 600mm holder
BCG180Z Caulking Gun (Body Only) £189.95 £158.29 506099 4.0Ah Li-Ion 18V Battery £89.94 £74.95 506101 DC18RC Battery Charger £78.95 £65.79 503660
Inc.vat Ex.vat Code
Makita BCG180Z Caulking Gun 18V (Body Only)
16_Building 470_484.indd 481 29/11/2013 12:58
482
16
Section
axminster.co.uk/signup for our exclusive email offersCall 03332 406406
Carpet Fitting, Flooring & Decking
Brushes
This handy little clamp is an invaluable aid for the installation of wooden strip fl ooring. It is positioned on the board with the lip over the edge and the clamp screw is tightened up against the wall to position the edge boards. There is a plastic end on the screw to prevent marking the wall.
Carpet Fitting, Flooring & Decking
A professional 4.8mm V notched trowel with Durasoft handle for comfort, which does not deteriorate in use and can be washed without detriment to the surface of the handle. Suitable for all types of adhesive, the trowel is made of carbon steel 290 x 110mm.
Adhesive Spreader £14.15 £11.79 357042 Inc.vat Ex.vat Code
Marshalltown Adhesive Spreader
After all the building and decorating work is fi nished it’s fi nally time to lay the carpet. This Knee Kicker/Carpet Stretcher is specially made for the job. Adjustable in length, fi tted with a foam fi lled bumper pad. The business end has both Nap-Grip inserts and extendable steel teeth; a twist dial on top of the head is used to vary the length of the teeth.
Carpet Stretcher £31.94 £26.62 310235 Inc.vat Ex.vat Code
Carpet Stretcher Knee Kicker
A fl ooring clamp that can be used on fl oorboards, tongue and groove or woodblock fl ooring. The mechanical advantage gained through the linkage is quite amazing and allows the boards to be pushed into place with the minimum of effort. Made of steel with a painted fi nish and soft grip handle.
Flooring Clamp £43.44 £36.20 390015 Inc.vat Ex.vat Code
Vaughan Flooring Clamp
the installation of wooden strip fl ooring. It is positioned on the board with the lip over the edge
Flooring Edge Cramp
Edge Clamp £15.95 £13.29 410476 Inc.vat Ex.vat Code
Carpet Fitting, Flooring & Decking
This saw has hard point teeth for long life. The blade is 300mm(12”) with a second row of teeth along the curved end to enable a cut to be started in a fl oorboard. Once you have broken through then you can use the normal edge to continue the cut. The straight tooth line is 11tpi with FineLine tooth form, useful for cutting laminate fl ooring, thin plywood, wood, PVC pipe, coving etc.
300mm £9.44 £7.87 210214 Inc.vat Ex.vat Code
Axminster FineLine Floorboard Saw
This is a useful strap clamp for forcing fl oorboards together prior to fi xing. The two plates are positioned over the edges of the boards, the strap is positioned around the spindle and the ratchet is tightened to apply the necessary clamping force. The working range is from 0.3 to 4.0 metres.
Clamp £9.95 £8.29 410489 Inc.vat Ex.vat Code
Floorboard Clamp Floorboard Clamp
Unika Solid Wood Floor Fitting Kit Unika Solid Wood Floor Fitting Kit includes a Wood Floor Persuader, Professional Push Block, 100 Spacers and Spatula, for the installation of solid wood fl ooring. The Professional Push Block is a solid block of 480 x 60 x 20mm fi tted with a handle for pushing laminate and timber fl oor panels together. The Persuader is 450mm long with a 140mm broad head that has a 90° lip on its underside. The head is placed over the edge of the fl oor board then a hammer used to hit the striking block, thereby tightening the board in place, ready to be fi xed. The kit includes 100 plastic wedge spacers and a PVA spreader.
Floor Fitting Kit £26.45 £22.04 702455 Inc.vat Ex.vat Code
Parquet, laminated or panel fl ooring is stylish and fashionable. Bessey has developed a range of specialist clamping tools that make the laying of these fl oor coverings easier and more effi cient. This ratchet fl ooring clamp has a strong polyester strap able to withstand forces of upto 5000N. With a capacity of 4000mm.
Ratchet Flooring Clamp £28.94 £24.12 952098 Inc.vat Ex.vat Code
Bessey Ratchet Flooring Clamp
When laying laminate fl ooring keeping a consistent and correct spacing to the wall is critical. The use of wedges and blocks is imprecise. The BESSEY AV2 spacer is small, practical and simple. Inserted between the wall and the fi rst row of fl ooring, the distance to the wall setting is simply a turn of the red dial. The AV2 compensates for any irregularities in the wall between 5 to 20mm. A millimetre scale shows the exact spacing. Manufactured from impact resistant, break resistant polyamide, the AV2 is light and tough. Each one measures 90 x 60 x 12mm, supplied in packs of four.
Bessey AV2 Floor Spacers (Pack of 4)
AV2 Floor Spacers (Pkt 4) £10.74 £8.95 502366 Inc.vat Ex.vat Code
Brushes
This is a soft 300mm brush head especially useful around the workshop where fi ne dust may collect. The soft natural bristles have less tendency to raise the dust. This broom works well with our ‘Bigmouth’ dustpan and takes a 1,200mm handle by 23.5mm(15/16”).
Brush 300mm £2.45 £2.04 211200 Handle 1200mm(48”) £1.94 £1.62 610624
Inc.vat Ex.vat Code
Coca Sweeping Brush Short stiff hard wearing union mix bristles, 225mm x 60mm. All the effi ciency of a scrubbing brush but with the added benefi t of a long (1,200m) handle. Takes 23.5mm(15/16”) diameter handle.
Deck Scrub brush 225mm £2.84 £2.37 610623 Handle 1200mm(48”) £1.94 £1.62 610624
Inc.vat Ex.vat Code
Deck Scrub Brush This mix of bristles makes for a tough all round 330mm yard brush that is durable in all conditions for heavy duty cleaning in both building and gardening. Takes 1200mm long handle, 28.5mm(1.1/8”) diameter.
Yard Brush 330mm £4.85 £4.04 610625 Handle 1200mm(48”) £2.24 £1.87 610626
Inc.vat Ex.vat Code
Cane/Bassine Yard Brush
This double sided, permanent tape has a high strength adhesive for a very secure fi x. It is designed as a carpet tape but with a host of similar uses. The reinforced fabric gives a strong hold, suitable for uneven fl oors and a range of surfaces including concrete, tile, vinyl, bitumen, metal and wood. 50mm width, 10m length.
Double Sided Carpet Tape £8.94 £7.45 506062 Inc.vat Ex.vat Code
Unibond Double Sided Carpet Tape This double sided, permanent tape has a high
vinyl, bitumen, metal and wood. 50mm width, 10m length.
Size 8 (M) £1.34 £1.12 501553 Size 9 (L) £1.34 £1.12 501554 Size 10 (XL) £1.34 £1.12 501555
Inc.vat Ex.vat Code
uvex Unipur 6639 Work Gloves Lightweight and fl exible these gloves have palms coated with polyurethane. They offer excellent dexterity combined with high abrasion resistance. Designed for dry environments or light moisture. Abrasion level 4, they are tear resistant, very comfortable and easy to wear. Available in sizes 8, 9, 10. UNIPUR 6639 EN388 - 4 1 3 1.
Lightweight and fl exible these gloves have palms coated with polyurethane. They offer excellent dexterity combined with high abrasion resistance. Designed for dry environments or light moisture.
16_Building 470_484.indd 482 29/11/2013 12:59
483
16
Section
Order online axminster.co.uk/building
More glazing & stained glass available online...
axminster.co.uk/stainedglass
Glazing & Stained Glass
A solid one piece forging with a thick leather scale riveted to each side of the tang forming a comfortable grip. The hacking knife is mainly used to remove old putty from window frames. It can also be useful as a small froe for splitting small green wood branches. The heavy back is designed to be struck with a hammer, this hacking knife is forged and particularly well ground and fi nished.
Hacking Knife £7.25 £6.04 410102 Inc.vat Ex.vat Code
Hacking Knife
This professional grade glass cutter with tungsten carbide wheel, features a transparent handle which houses the oil supply to the wheel. This constant supply of oil keeps the glass open and makes for a very clean break. A professional level cutter at a very reasonable price.
Glass Cutter £2.24 £1.87 100142 Inc.vat Ex.vat Code
Lubricated Glass Cutter
A professional grade lubricated glass cutter with a tungsten carbide wheel that stores a supply of oil in the knurled handle. The constant supply of oil keeps the glass open and makes for a very clean break.
Glass Cutter £5.64 £4.70 100143 Inc.vat Ex.vat Code
Deluxe Lubricated Glass Cutter
An essential aid for cutting out glass for circular pictures. A lever-operated rubber suction pad holds the cutter securely to the glass while the cutting wheel is traversed around the circle, scribing out a clean cut in the glass. The brass bar is calibrated in metric and gives a maximum radius of 300mm.
Glass Cutter £16.74 £13.95 100144 Inc.vat Ex.vat Code
Axminster Circular Glass Cutter
Glazing & Stained Glass
A choice of two models, either single or double cup, both being made from strong mouldings fi tted with rubber bases. The single cup version is activated by closing the two handles, the double by depressing the individual toggles. Effective on glass or any smooth surface, a very useful item when it comes to moving household appliances around such as fridges or washing machines, just attach a lifter for an instant handle. Pad diameter 115mm(4.1/2”), lifting capacities are 40kg for the single, 60kg for the double.
Single Suction £4.25 £3.54 300259 Double Suction £7.74 £6.45 300293
Inc.vat Ex.vat Code
Suction Lifters
A range of three knives, all of the best quality Sheffi eld steel. Professional scale tang construction with solid bolsters and riveted rosewood handles. Three types available; Standard (Clipt) Pattern Putty Knife 38mm(1.1/2”), Chisel Putty Knife - 25mm (1”) and Skew Chisel Putty Knife 38mm(1.1/2”).
a. Standard Pattern 38mm £9.05 £7.54 400427 b. Chisel Pattern 25mm £9.05 £7.54 400428 c. Skew Pattern 38mm £9.24 £7.70 400429
Inc.vat Ex.vat Code
Putty Knives
Handy for lifting and levelling
The Winbag Air Wedge is an all purpose high quality craftsman’s tool. Fast and exact adjusting from 2 - 50mm thick with a load pressure 100kg. Ideal for fi tting internal doors and door frames, double glazed windows and doors and also comes in handy for lifting and levelling furniture, washing machines, fridge freezers, kitchen units, water tanks etc.
Air Wedge (1) £19.96 £16.63 210599 Air Wedge (4) £69.95 £58.29 701011
Inc.vat Ex.vat Code
Winbag Air Wedges Winbag Air Wedges
Grozier Pliers £10.94 £9.12 952863 Inc.vat Ex.vat Code
Leponitt Grozier Pliers
Lead Dykes £10.55 £8.79 952865 Inc.vat Ex.vat Code
Leponitt Lead Dykes
Leponitt Triple Headed Hammer
Stained Glass Hammer £16.44 £13.70 952862 Inc.vat Ex.vat Code
Stained Glass Iron £33.95 £28.29 910387 Inc.vat Ex.vat Code
Weller HK2 Stained Glass Soldering Iron Weller HK2 Stained Glass Soldering Iron
Lead Vice £9.44 £7.87 952860 Inc.vat Ex.vat Code
Leponitt Lead Vice
Leponitt Lead Knife
Lead Knife £15.35 £12.79 952861 Inc.vat Ex.vat Code
a.
b.
c.
• 100mm long, 40mm wide• Made of die-cast alloy• Spring-loaded cam action jaw grips fi rmly• Use to remove kinks and bends in lead came• Came is easier to work and results in better fi nish• Can be fi xed to a bench with a single screw
• 125mm long with 60mm radius curved edge• Extremely sharp stainless steel blade• Double riveted to a wooden handle• Requires only steady pressure and a rocking motion to cut lead• Hammer button for tapping horseshoe nails in place
Running Pliers £7.94 £6.62 952864 Inc.vat Ex.vat Code
Leponitt Running Pliers • Will not damage glass• Alignment mark to ensures correct positioning• Gentle squeeze results in a clean break• Work equally well on long straight or very short cuts• Use for stained glass or mirrors only• 200mm long, 30mm jaw depth
• Dual function stained glass pliers• Use to snap thin strips after scoring• Nibble and trim from external or internal curves• Finely serrated jaws, heat-treated and hardened• Chemically blackened for protection• Spring loaded handles for easy operation• Handles with dipped coating for comfort• Length 160mm, jaw depth 30mm
• Acute angle cutting edges specifi cally for lead cutting• Flat face to ensure a clean fi nish• Handy for snipping and carrying out repairs• Use for fi ne trimming• High carbon steel hardened jaws• Sprung-loaded handles with comfort grips• Overall length 165mm
• 80W• Suitable for stained glass work• Supplied with tip and a stand
• Hammer with three interchangeable heads• Spare stored at the end of the handle• Two plastic heads, one hard, one soft • Steel head for nails and general use• Heads simply screw into place• One-piece glass fi bre reinforced head and handle• 285mm long, 25mm diameter heads, weight 268g
£13.70 952862 Ex.vat Code
Roofi ng
Designed for cutting most types of common insulation materials, rock wool, fi breglass, foam-board, polystyrene sheet, pipe lagging etc. The scalloped blade is 250mm long and hard chrome plated for corrosion protection. The tool steel blade is 0.8mm thick and its razor sharp edge makes an often messy task a whole lot easier.
Insulation Board Cutter £12.95 £10.79 502386 Inc.vat Ex.vat Code
Insulation Board Cutter
16_Building 470_484.indd 483 29/11/2013 13:00
484
16
Section
Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95Call 03332 406406
Ladders
Zarges Industrial Extension Ladders feature large D-shaped serrated rungs providing a comfortable horizontal surface during use. They are tested and certifi ed to both BS 2037 Class 1 and EN 131. The box section side stiles provide extra strength and smooth handling. These ladders allow easy and precise rung-by-rung adjustment. The rung hooks and locking mechanism lock the sections together when in use and when closed for storage or transport. The rungs and stiles are extruded aluminium for extra strength and have high strength, non-twist joints and rubber feet prevent slipping. Standard: EN 131, 150 kilo rating and BS 2037 class 1; 175 kilo rating.This item is delivered free, direct from the manufacturer to your door. Ladder 2-Part D Rung - 2 x 8 £119.94 £99.95 117155 Ladder 2-Part D Rung - 2 x 10 £149.94 £124.95 117156 Ladder 2-Part D Rung - 2 x 12 £168.95 £140.79 117157 Ladder 2-Part D Rung - 2 x 14 £195.95 £163.29 117158 Ladder 2-Part D Rung - 2 x 16 £222.95 £185.79 117159 Ladder 2-Part D Rung - 2 x 18 £288.95 £240.79 117160
Inc.vat Ex.vat Code
Zarges Industrial Extension Ladder 2-Part
Ladders
The Zarges Industrial Swingback Steps have high strength for regular use and are the ultimate builder’s stepladder. The stepladder has a patented 7-point connection between tread and stile with reinforcing support rod through the centre of the tread. For safety, the ladder has non-slip rubber feet and large serrated treads. Smooth box section stiles ensure a comfortable to hold, with no sharp edges. The Swingback steps provide optimal stability thanks to locking sidebars on both sides. Tested and certifi ed to BS 2037 Class 1 and EN 131.This item is delivered free ,direct from the manufacturer to your door.
Swingback Steps 4 Rungs £93.95 £78.29 117139 Swingback Steps 5 Rungs £107.94 £89.95 117140 Swingback Steps 6 Rungs £117.95 £98.29 117141 Swingback Steps 7 Rungs £126.95 £105.79 117142 Swingback Steps 8 Rungs £144.95 £120.79 117143 Swingback Steps 10 Rungs £179.94 £149.95 117144 Swingback Steps 12 Rungs £209.94 £174.95 117146
Inc.vat Ex.vat Code
Zarges Industrial Swingback Steps The Zarges Industrial Swingback Steps have high strength
Zarges Industrial Swingback Steps
Zarges Industrial Extension Ladders feature large D-shaped serrated rungs providing a comfortable horizontal surface during use. They are tested and certifi ed to both BS 2037 Class 1 and EN 131. The box section side stiles provide extra strength and smooth handling. These ladders allow easy and precise rung-by-rung adjustment. The rung hooks and locking mechanism lock the sections together when in use and when closed for storage or transport. The rungs and stiles are extruded aluminium for extra strength and have high strength, non-twist joints and rubber feet prevent slipping.
Ladder 2-Part
The Zarges Skymaster Trade Ladders are extremely rigid with strong connection between rungs and stiles. The top and middle sections have a rung hook and positive operation locking tab. A rigid aluminium-locking bar prevents collapsing during use. Strong, nylon restraint straps with a sewn-in fi xing tab keep the ladder stable and prevent splaying. Quality stile guides encompass the whole stile, with plastic inserts for smooth handling. The Skymaster ladders have high-strength ZARGES quality fl anged connections between rung and stile. The replaceable 2-component plastic end caps ensure positioning without risk of slipping and at the same time provide fi rm seating in the stile. The rungs and stiles are extruded aluminium sections, which provide excellent strength. These ladders are in effect 6 ladders in one. You can use them freestanding, as a trestle step, single, double or triple extension ladder or even a stairway ladder. Standard: EN 131, 150 kilo rating.This item is delivered free, direct from the manufacturer to your door.
Trade Ladder 3-Part - 3 x 6 Rungs £229.94 £191.62 117124 Trade Ladder 3-Part - 3 x 7 Rungs £229.94 £191.62 117125 Trade Ladder 3-Part - 3 x 8 Rungs £264.95 £220.79 117126 Trade Ladder 3-Part - 3 x 9 Rungs £269.94 £224.95 117127 Trade Ladder 3-Part - 3 x 10 Rungs £294.95 £245.79 117128 Trade Ladder 3-Part - 3 x 12 Rungs £374.94 £312.45 117129 Trade Ladder 3-Part - 3 x 14 Rungs £509.94 £424.95 117130
Inc.vat Ex.vat Code
Zarges Trade 3-Part Skymaster Ladder
16_Building 470_484.indd 484 29/11/2013 14:32