Upload
dangcong
View
214
Download
0
Embed Size (px)
Citation preview
#1 and ChassisSHEET 1 OF 8
NAME DATE
DrawnConceptual Drawing for Reference Only
3D View12/2/2014
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#1 Body\STD Body 11-20-15\
60 60
30 30 18 18
7
90 120
1
95
Whelen L31HAF
#1 and ChassisSHEET 2 OF 8
NAME DATE
DrawnConceptual Drawing for Reference Only
Drivers Side12/2/2014
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#1 Body\STD Body 11-20-15\
Whelen L31HAF
D RingsD RingsD RingsD Rings
#1 and ChassisSHEET 3 OF 8
NAME DATE
DrawnConceptual Drawing for Reference Only
Top12/2/2014
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#1 Body\STD Body 11-20-15\
44
52 40
20 18
18
30
30 96
2.5
1
8 1
8 4
8
44
8
8
9
12
14
13 13 5
1
LED lights as shone or on roof of cab
Steps to support sign pocket doorsWhen down
E TrackE TrackE Track
D RingsD Rings
1) Toolbox Width may vary Depending on chassisframe width
50 foot Hydraulic hose reel (Press and Return) inside with hole in door for hose with guide rollers
Note:*Post Puller & Pounder brackets shipped Loose*Auger head/Bit storage to be located by customer at 80% meeting
#1 and ChassisSHEET 4 OF 8
NAME DATE
DrawnConceptual Drawing for Reference Only
Rear View12/2/2014
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#1 Body\STD Body 11-20-15\
Door widths to line up with the sides of the postpockets on the body.
#1 and ChassisSHEET 5 OF 8
NAME DATE
DrawnConceptual Drawing for Reference Only
Rear View with sign pockets12/2/2014
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#1 Body\STD Body 11-20-15\
48
24
56
44
8
12 42 48
18
26
12
8
18
A
Sign Size1) 48"2)30"3)36"4)24"5)8"
1234
5Strobes street and curb side
2 Air Hose Reels 50 ft of Hose ea1) 3/81) 3/4Steel Air supply line for hose reelcan run through toolbox on back side then thorugh dead space in stake pocket area butmust be protected in toolboxs
Round LED Warning Lights
Gas torch Hose reel
Vented compartment for Oxy/Acet tanksReinforced floor for tanks and reinforced top for hose reel. Reel to have 50 feet of hose
Drawer Cabinet inside3 drawers 5 inch tall
0.25
1 DETAIL A
SCALE 1 : 3
#1 and ChassisSHEET 6 OF 8
NAME DATE
DrawnConceptual Drawing for Reference Only
Passenger Side12/2/2014
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#1 Body\STD Body 11-20-15\
150in 12'-6"96
in8'
-0"
66in 5'-6"
86in 7'-2"
98in 8'-2"
110in 9'-2"
122in 10'-2"
150in 12'-6"
29in
2'-5
"
10
9
20
18
18
18
14
Dead Space
Dead Space
Air line can go through here for Hose Reels
Cleanout holse on this end of stake pockets.Holes positioned to miss crossmembers
#1 and ChassisSHEET 7 OF 8
NAME DATE
DrawnConceptual Drawing for Reference Only
Stake Pockets12/2/2014
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#1 Body\STD Body 11-20-15\
13
12.0
14
30in 2'-6"36in 3'-0"
42in 3'-6"
48in 4'-0"60in 5'-0"
72in 6'-0"
66in 5'-6"96in 8'-0"
7 12
4
6
Scale 1:10
2
4
2
Scale 1:2
Drain Hole in bottom of pocket
Door Widths to line up with the sides of stake pockets on body
#1 and ChassisSHEET 8 OF 8
NAME DATE
DrawnConceptual Drawing for Reference Only
Sign pocket Doors12/2/2014
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#1 Body\STD Body 11-20-15\
Scale 1:50
#2 Body 12514SHEET 1 OF 8
NAME DATE
DrawnConceptual Drawing for Reference Only
3 view12/8/2014
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#2 Body\Std Body 12414\
48
48 48 48
120in 10'-0"
24
18
18
1
153in 12'-9" 88
2
LED Warning Light
Whelen StrobeHere or on cab roof
#2 Body 12514SHEET 2 OF 8
NAME DATE
DrawnConceptual Drawing for Reference Only
Drivers Side12/8/2014
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#2 Body\Std Body 12414\
24 24 24 18
8
18
18
38
42 52
18
96in 8'-0"
E TrackE TrackE Track
#2 Body 12514SHEET 3 OF 8
NAME DATE
DrawnConceptual Drawing for Reference Only
Rear12/8/2014
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#2 Body\Std Body 12414\
24 24 24 18
8
18
18
38
42 52
18
96in 8'-0"
#2 Body 12514SHEET 4 OF 8
NAME DATE
DrawnConceptual Drawing for Reference Only
Rear w Sign Pockets12/8/2014
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#2 Body\Std Body 12414\
Air Hose Reel50 ft hose
Go LightGo Light
Wehlen Strobe
D RingsD RingsD RingsD Rings
#2 Body 12514SHEET 5 OF 8
NAME DATE
DrawnConceptual Drawing for Reference Only
Top12/8/2014
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#2 Body\Std Body 12414\
24
48
56
12 30
30 30
15
42
2.5
18
7
46 3
8
A
123
4
5Air Hose Reel50 ft hose
Go LightGo Light
Wehlen Strobe
LED Warning Light
0.25 0.75
DETAIL A SCALE 1 : 5 #2 Body 12514
SHEET 6 OF 8
NAME DATE
DrawnConceptual Drawing for Reference Only
Pass Side12/8/2014
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#2 Body\Std Body 12414\
96in
8'-0
"
153in 12'-9"
48in 4'-0"
42
90in 7'-6"
126in 10'-6"
105in 8'-9"
12
12
12
12
12
18
18
48
63 51
153in 12'-9"
42
52
24
Dead Space
Clean out holesthis end of stake pockets
#2 Body 12514SHEET 7 OF 8
NAME DATE
DrawnConceptual Drawing for Reference Only
Stake Pockets12/8/2014
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#2 Body\Std Body 12414\
14
48in 4'-0"55in 4'-7"
60in 5'-0"
13
Door edges to line up with post pocketsDoor edges to line up with post pockets
12 30in 2'-6"
36in 3'-0"42in 3'-6"
60in 5'-0"67in 5'-7"
72in 6'-0"
18in 1'-6"
96
1.5
2
4
Top View of Pocket Drain Hole#2 Body 12514
SHEET 8 OF 8
NAME DATE
DrawnConceptual Drawing for Reference Only
Sign Post Doors12/8/2014
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#2 Body\Std Body 12414\
Front
Passenger / Curb Side Street Side
Truck Bodie #3REV
Body 3SHEET 1 OF 5
DWG. NO.Last Saved 4/3/2012Date Drawn 7/9/2010
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#3 Body\Drawn by John KConceptual Drawing for reference only
36 48 48
28
48
180in15ft
26
18
18
12
36
66
1
2
3
3
4
4
5
No divider between # 3 & 4 bottom cabinets
#1 cabinet vented, floor reinforced and tiedowns for 4 welding tanks w/ bottom rings. Two J hooks in cabinet location to be Mn/Dot approved. outrigger pad holder under cabinet.#2 cabinet has; 50' of 1/4 Oxy/acetylene hose reel, 50' of 3/4 air line on a hose reel, 50' elec cord reel w/ 12/3 wire, Vents in cabinet, floor reinforced#3 top cabinet door faces the center of body & have a shelf half way up. The bottom #3 & 4 shall have no devider between them#5 Shall have a 12" tall pull out drawer with dividers. Door hinge on drivers side and opening is twards the rear of the truck. Conceptual Drawing for referance only
Street Side
Body 3SHEET 2 OF 5 Street Side
Drawn by John KLast Saved 4/3/2012
Conceptual Drawing for reference only
4236
5
364848
48
28
12
26
6
170180in15ft
5
361218
66
12
14
Curb Side
1
2
3
3
4
4
5
outrigger pad holder in this area but to not block the hydraulick fill
3/4 Air hose reel
Oxy/Act Reel
Elec cord reel
Air dryer
6
Mud flaps front and rear of rear tires on both sides of truck
#1 Has an adjustable shelf, braker box for the 110 work lights and the generator controls#2 Air dryer drain hose to go through the bottom of the box and bed. #3 &4 Top will have no divder between them#3 Bottom has drawers with shelf above drawers#5 Same ase Street Side. Body 3
SHEET 3 OF 5Sheet Curb sideDate drawn 4/3/2012Drawn by
Conceptual Drawing for reference only
96in8ft
28
2828
18
18
40
13
1
7
26
27
36
8
10 swivel type J hooks2 on each side 6 on the back wall
Strobe box facing back & to side of truck on seprate switchesSame on street side rear corner
6
55
Rear View
Top of step just below the bottom of the door
Body 3SHEET 4 OF 5Sheet Rear View
Last Saved 4/3/2012Drawn By John K
Conceptual Drawing for reference only
96in8ft
180in15ft
1214
29
36 3030
Front
Work lightsWork lights street & curb side
Generator compartment
Work lights
Body 3SHEET 5 OF 5
Date Saved 4/3/2012Drawn By John K
Top ViewConceptual Drawing for reference only
#7 BodySHEET 1 OF 6
NAME DATE
DrawnConceptual Drawing for Reference Only
3 View2/2/2015
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#7 Body\12.5 Bed\
48 76
18
36
24
18
Whelen LightWhelen Light E TRack
Shovel Basket1" off deck
LoopedGrab rail
StraitGrab rail
#7 BodySHEET 2 OF 6
NAME DATE
DrawnConceptual Drawing for Reference Only
Street Side2/2/2015
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#7 Body\12.5 Bed\
40 5
2
18 22
20 22 18
12
2.5
18
24 Air Hose reel
Reinforce forCrane
Bulkhead
Total 3 hooksIn compartment
Shelf
#7 BodySHEET 3 OF 6
NAME DATE
DrawnConceptual Drawing for Reference Only
Passenger Side2/2/2015
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#7 Body\12.5 Bed\
48
38
26
24
Straight Grab Rail
LoopedGrab Rail
#7 BodySHEET 4 OF 6
NAME DATE
DrawnConceptual Drawing for Reference Only
Top View2/2/2015
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#7 Body\12.5 Bed\
6
26 38 48
24
96
8
12
18
24
Crane Reinforcement
E TrackE Track
#7 BodySHEET 5 OF 6
NAME DATE
DrawnConceptual Drawing for Reference Only
Rear2/2/2015
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#7 Body\12.5 Bed\
96in 8.0ft120in 10.0ft
150in 12.5ft
84in 7.0ft
12
10
10
10
16
12
104in 8.7ft
Clean out holeClean out hole
Clean out holeClean out hole
Clean out hole
Dead Space
Front of Truck
#7 BodySHEET 6 OF 6
NAME DATE
DrawnConceptual Drawing for Reference Only
Stake Pockets2/2/2015
7/9/2015kiml1johLast saved
File N:\CPWP\Drawings\Contract\Truck Bodies Custom\#7 Body\12.5 Bed\
11/8/2011DRAWN #8 BodyDWG.
SHEET 1 OF 7REV
NAME
JJK
kiml1joh 7/9/2015Last Saved
Conceptual Drawing for reference onlyDate
3D View
135 11'-3"100 8'-4"
88 7'-4"
50 4'-2"
75 6'-3"
2010
10
2010
11/8/2011DRAWN #8 BodyDWG.
SHEET 2 OF 7REV
NAME
JJK
kiml1joh 7/9/2015Last Saved
Conceptual Drawing for reference onlyDate
Stake Pockets
29 29 38 40
23
25
15
66
91
18
135 11'-3" 82.5
31.5
" x 4
4"
24" x
48"
12x36
8x24
24" x
30"
24" x
24"
24" x
18"
2 Adjustable Shelves
11/8/2011
Outrigger Holder
DRAWN #8 BodyDWG.
SHEET 3 OF 7REV
NAME
JJK
kiml1joh 7/9/2015Last Saved
Conceptual Drawing for reference onlyDate
Drivers Side
D RingsD RingsD RingsD Rings
11/8/2011DRAWN #8 BodyDWG.
SHEET 4 OF 7REV
NAME
JJK
kiml1joh 7/9/2015Last Saved
Conceptual Drawing for reference onlyDate
Top View
7.95 8 8 84
8
5
1824
96 8'-0"20
34
52
12.5
20
DR 6' 7' 8'
E Trackk
D RingsD RingsD Rings
Upper StrobeUpper Strobe
Rear Strobe
Rear Strobe
11/8/2011DRAWN #8 BodyDWG.
SHEET 5 OF 7REV
NAME
JJK
kiml1joh 7/9/2015Last Saved
Conceptual Drawing for reference onlyDate
Rear View
18
24
96 8'-0"
20
34
52
12.5
20
E Trackk
Rear DoorsRear Doors
11/8/2011DRAWN #8 BodyDWG.
SHEET 6 OF 7REV
NAME
JJK
kiml1joh 7/9/2015Last Saved
Conceptual Drawing for reference onlyDate
Rear Doors
30 27 52 26
Hydraulic Hose Reel
1
2
2 Adjustable Shelves
3
4
4
6Outrigger Holder
6
Upper StrobesUpper Strobes
Some of this compartment may be used for reinforcement for crane
Upper Strobes may be mounted on cab roof or on posts on front of body
11/8/2011
NotesShelf1.Tool Box assembly2.Oxy/Acet hose reel3.Oxy/Acet Cabinet to be Vented and have a reinforced floor 4.Crane compertment to be reinforce for crane5.Vice holders6.
DRAWN #8 BodyDWG.
SHEET 7 OF 7REV
NAME
JJK
kiml1joh 7/9/2015Last Saved
Conceptual Drawing for reference onlyDate
Passenger Side
6/10/2011DRAWN #9 Bridge Body
SHEET 1 OF 6
NAME
JJK
kiml1joh 7/9/2015Last Saved
Conceptual Drawing for reference onlyDate
Scale
166
53 26 53 23 12
58
22
6
36
20
80
105
Floor and back wall to be reinforce for Mn/Dot installed jack hammer rack4 hammers @ 100 lbeach.
2 swivel j hooks on each wall of this cabinet 2 Shelves1 Shelf
3 Shelves
SS 1
SS 2 SS 3 SS 4
Street Side
All Shelves this side and curb side are to be adjustalblewith lip on outside top edge.
Rope lighs in all compartments to be off when ing swithch is off and also a on/off switch on dash.
#9 Bridge BodySHEET 2 OF 6SCALE:
1
Street Side
22
42
50
70
1840
58 18
96
36
Lower Warning
Back up light
Brake,turn Tail
Upper Warning2" lip
Recessed light switch
Recessed Air Hose Box6X6 street side6X20 Curbside.Holes to matchhose reels inside compartment
Go LightRear View
upper LED warning lights are Wheleen 2FA00ZARLower LED warning lights are Wheleen 2EA00ZAR
#9 Bridge BodySHEET 3 OF 6SCALE: 1:28
Rear View
22
58
53265323
33 8
All Shelves are adjustable and with a 1" lip on the front edge#6 Gas torch hose reel 50 foot long#15 is a 6x6 air hose pocket with a quick disconnect for the air line#26 Gas torch tanks with wall mount. floor is reinforced for tanks, cabinet is vented. # 8 is a Whelen Pioneer light PFP2 w/PBA203 mount# 34 is a Whelen Pioneer Light PFA1W/PBA103 mount
15
6
26
4 shelves 1 shelfone shelf above drawer assembly
CS 2CS 3CS 4
CS 1
Four swivel hooks on wall twards rear of truck l and 1 on the compartment back wall
Drawer assembly one 7" two 5" Five 3" HD drawersfull width of body compertment
24 Parts Bins
Curb Side
#9 Bridge BodySHEET 4 OF 6SCALE: 1:28
1
Curb Side
Compartment to be installed along the front edge of rear box from top of box to cealing. On each side
Roof vent location to be determand at 80% meeting.Rear Steps to be non-slip expanded metal.
SHEET 5 OF 6SCALE: 1:28
#9 Bridge Body Top Side