COMPRESSORS & PNEUMATIC TOOLS...2020/02/09 · The above air tool recommendations are based on Average CFM = 25% duty cycle of tool ( i.e. continuous running for 15 seconds) KEY MCFRC100

Page 1

COMPRESSORS & PNEUMATIC TOOLS

The above air tool recommendations are based on Average CFM = 25% duty cycle of tool ( i.e. continuous running for 15 seconds)

KEY

MCFRC100MCFRC1081.1kW/24l@7Bar:65l/minFAD 2.3 CFM

MCFRC102AMCFRC1091.5kW/50l@7Bar:105l/minFAD 3.7 CFM

MCFRC103

1.5kW/100l@7Bar:105l/minFAD 3.7 CFM

MCFRC113


MCFRC241

550W/24l@6Bar:50l/minFAD 1.7 CFM

MCFRC242


MCFRC243


MCFRC244


MCFRC247

3,3kW/150l@8Bar:330l/minFAD 11.7 CFM

MCFRC248


AIR DUSTERS TYRE INFLATOR AIR NAILER AIR BRUSH

AIR STAPLER TOUCH-UP GUN LOW PRESSURESPRAY GUN HIGH PRESSURESPRAY GUN AIR DRILL AIRSCREWDRIVER

DIE GRINDER ANGLE GRINDER PALM SANDER ORBITAL SANDER IMPACT WRENCH 3/8 - 1/2”

MAKEUP INDUSTRY DENTAL LABS. STERILE LABS.

FOOD PREP. SOUND RESTRICTED ESTATES /FACTORIES

In order to maintain the manufacturers stated warranty, please adhere strictly to the following recommended duty cycles: Direct Drive 2HP/3HP – 60% Duty Cycle ( 6 minute run/4 minute rest) If the compressor runs for longer than the stated times, please adjust usage or air tool type accordingly. The ratings are suggested usage for optimal running expectancy of your compressor

DIRECT DRIVE COMPRESSORS


SUITABLE

NON USABLE

Page 2

KEY

SUITABLE MCFRC221


MCFRC222


MCFRC227


MCFRC228


MCFRC229


MCFRC210


MCFRC235


NON USABLE

AIR DUSTERS TYRE INFLATOR AIR NAILER AIR BRUSH AIR STAPLER TOUCH-UP GUN LOW PRESSURESPRAY GUN HIGH PRESSURESPRAY GUN AIR DRILL AIR SCREWDRIVER DIE GRINDER ANGLE GRINDER PALM SANDER ORBITAL SANDER IMPACT WRENCH 3/8 - 1/2”

In order to maintain the manufacturers stated warranty, please adhere strictly to the following recommended duty cycles: Belt Drive 2HP/3HP – 80% Duty Cycle (8 minute run/2 minute rest). If the compressor runs for longer than the stated times, please adjust usage or air tool type accordingly. The ratings are suggested usage for optimal running expectancy of your compressor

BELT DRIVE COMPRESSORS

The above air tool recommendations are based on Average CFM = 25% duty cycle of tool ( i.e. continuous running for 15 seconds) Page 3


Page 4

WA

RR

AN

TY

YE

AR

COMPRESSORSDI

RECT

DRI

VE C

OMPR

ESSO

RS

24L DIRECT DRIVE COMPRESSORS24L / 1.1kW / 1.5HP Lubricated

Code no: Barcode:MCFRC100 6003751001641

24L / 1.1kW / 1.5HP Lubricated With 5Pc Air Tool kit

• Tank Capacity: 24L• Motor Capacity: 1.1kW• RPM: 2850/min • 230V/50Hz• Maximum Pressure: 800kPa (8 Bar)• Free Air Delivery @ 700kPa (7 Bar): 65L/min• Piston displacement 138L/min• Weight: 21kg• 2.3 CFM @ 7 Bar• 90dB

Dire

ct D

rive

HOME

powe

r cab

le

2.5m


Dire

ct D

rive

HOME

powe

r cab

le

1.3mCode no: Barcode:MCFRC108 6003751340191

• Accessories include: 1x paraffin spray gun, 1x gravity feed spray, 1x air duster, 1x tyre inflator, 1x coiled airline hose

SAF E

T Y • P

E RF O RM A N C E • RE L IA B ILT Y

S A F E T Y • P E R F O R M A N C E • R E L I AB I L T

YAIA APPROVED

SAF E

T Y • P



YAIA APPROVED


Code no: Barcode:MCFRC102A 6003751010551

50L / 1.5kW / 2.0HP Lubricated With 5Pc Air Tool kit


Dire

ct D

rive

HOME

powe

r cab

le

2.5m


Dire

ct D

rive

HOME

powe

r cab

le


SAF E

T Y • P



YAIA APPROVED

• Accessories include: 1x paraffin spray gun, 1x gravity feed spray, 1x air duster, 1x tyre inflator, 1x coiled airline hose

SAF E

T Y • P



YAIA APPROVED

DIYUse

DIYUse

DIYUse

DIYUse

Page 5

WA

RR

AN

TY

YE

AR

COMPRESSORS

ALL PRESSURE VESSELS CONFORM TO: PRESSURE EQUIPMENT REGULATIONS AND

SANS 347: 2010

DIRE

CT D

RIVE

COM

PRES

SORS

/ DI

RECT

DRI

VE S

ILEN

T OI

L FR

EE C

OMPR

ESSO

RS



100L / 2.2kW / 3.0HP Lubricated V Head


Dire

ct D

rive

HOME

powe

r cab

le

1.3m

• Tank Capacity: 100L• Motor Capacity: 2.2kW• RPM: 2850/min • 230V~/50Hz• Maximum Pressure: 800kPa (8 Bar)• Free Air Delivery @ 700kPa (7 Bar): 165L/min• 324L/min piston displacement• Weight: 64kg • Twin cylinder air pump• Manual thermal protector on motor• 5.8 CFM @ 7 Bar• 95dB

Dire

ct D

rive

HOME

powe

r cab

le


SAF E

T Y • P



YAIA APPROVED

SAF E

T Y • P



YAIA APPROVED

24L / 550W / 0,75HP Silent Oil Free


50L / 750w / 1HP Silent Oil Free

SILENT OIL FREE DIRECT DRIVE MULTI CYLINDER COMPRESSORS 24L TO 50 L

• Tank Capacity: 24L• Motor Capacity: 0.75HP (550W)• RPM: 1450/min • 230V~/50Hz• Maximum Pressure: 700kPa (7 Bar)• Free Air Delivery @ 600kPa (6 Bar): 50L/min• Pump Displacement: 100L/min• Weight: 23kg • Twin Cylinder• 1.8 CFM @ 6 Bar• 42dB

• Tank Capacity: 50L• Motor Capacity: 1.0HP (750W)• RPM: 1450/min • 230V~/50Hz• Maximum Pressure: 700kPa (7 Bar)• Free Air Delivery @ 600kPa (6 Bar): 75L/min• Pump Displacement: 130L/min• Weight: 33kg • Twin Cylinder• 2.7 CFM @ 6 Bar• 43dB


OIL FREE

compressor

OIL

FR

EE

• O

IL F

REE • OIL FREE • OIL FREE • O

IL FRE

E • O

IL FREE • OIL FREE

• Low maintenance • Longer Running Life• For use in dentistry, food packaging

and general applications• Ideal for complexes/workshops with a

noise restriction

OIL FREE

compressor

OIL

FR

EE

• O

IL F


IL FRE

E • O




noise restriction

Dire

ct D

rive

powe

r cab

le

1.8m

Dire

ct D

rive

powe

r cab

le

1.8m

SAF E

T Y • P



YAIA APPROVED

SAF E

T Y • P



YAIA APPROVED

DIYUse

Light Industrial

Light Industrial

Light Industrial

Page 6

WA

RR

AN

TY

YE

AR

COMPRESSORSDI

RECT

DRI

VE S

ILEN

T OI

L FR

EE C

OMPR

ESSO

RS

SILENT OIL FREE DIRECT DRIVE MULTI CYLINDER COMPRESSORS 50L TO 200 L

50L / 150kW / 2HP Silent Oil Free

OIL FREE

compressor

OIL

FR

EE

• O

IL F


IL FRE

E • O



• Tank Capacity: 50L• Motor Capacity: 2.0HP (2 x 750W)• RPM: 1450/min • 230V~/50Hz• Maximum Pressure: 700kPa (7 Bar)• Free Air Delivery @ 600kPa (6 Bar): 150L/min• Pump Displacement: 2 x 130L/min (260L/min)• Weight: 45kg • 2 x Twin Cylinders• 5.3 CFM @ 6 Bar • 45dB



noise restriction

Dire

ct D

rive

powe

r cab

le

1.8m

100L / 1,5kW / 2HP Silent Oil Free

OIL FREE

compressor

OIL

FR

EE

• O

IL F


IL FRE

E • O



• Tank Capacity: 100L• Motor Capacity: 2.0HP (2 x 750W)• RPM: 1380/min • 230V~/50Hz• Maximum Pressure: 700kPa (7 Bar)• Free Air Delivery @ 600kPa (6 Bar): 150L/min• Pump Displacement: 2 x 130L/min (260L/min)• Weight: 45kg • 2 x Twin Cylinders



noise restriction

Dire

ct D

rive

powe

r cab

le

1.8m

200L 3,3kW / 4,4HP Silent Oil Free

150L / 3,3kW / 4,4HP Silent Oil Free

OIL FREE

compressor

OIL

FR

EE

• O

IL F


IL FRE

E • O


OIL FREE

compressor

OIL

FR

EE

• O

IL F


IL FRE

E • O



• Tank Capacity: 150L• Motor Capacity: 4,4HP ( 3 x 1100W)• RPM: 1380/min • 230V~/50Hz• Maximum Pressure: 800kPa (8 Bar)• Free Air Delivery @ 800kPa (8 Bar): 330L/min• Pump Displacement: 3 x 180L/min (540L/min)• Weight: 120kg • 3 x Twin Cylinders• 11.7 CFM @ 8 Bar • 81dB• Quick Coupler with 1/2” Ball Valve


• Tank Capacity: 200L• Motor Capacity: 4,4HP (3 x 1100W)• RPM: 1380/min • 230V~/50Hz• Maximum Pressure: 800kPa (8 Bar)• Free Air Delivery @ 800kPa (8 Bar): 330L/min• Pump Displacement: 3 x 180L/min (540L/min)• Weight: 150kg • 3 x Twin Cylinders• 11.7 CFM @ 8 Bar • 81dB• Quick Coupler with 1/2” Ball Valve

• Low maintenance • 4 Pole Motors• Longer Running Life• For use in dentistry, food packaging

and general applications• Ideal for complexes/workshops with

a noise restriction

Dire

ct D

rive

powe

r cab

le

1.8m

Dire

ct D

rive

powe

r cab

le

1.8m

• Low maintenance • 4 Pole Motors• Longer Running Life• For use in dentistry, food packaging

and general applications• Ideal for complexes with a noise

restriction

SAF E

T Y • P



YAIA APPROVED

SAF E

T Y • P



YAIA APPROVED

SAF E

T Y • P



YAIA APPROVED

SAF E

T Y • P



YAIA APPROVED

Light Industrial

Light Industrial

Industrial

Industrial

Page 7

WA

RR

AN

TY

YE

AR

COMPRESSORS

SAF E

T Y • P



YAIA APPROVED

100L 1.5kW 2.0HP Lubricated Cast Iron V Head

100L 2.2kW 3HP Lubricated Cast Iron W Head

V HEAD BELT DRIVE COMPRESSOR

W HEAD BELT DRIVE COMPRESSORS

• Tank Capacity: 100L • Motor Capacity: 1.5kW • Motor with manual overload protector • RPM: 2850/min • 220V-50Hz • Max RPM: 900 • Maximum Pressure: 800Kpa (8Bar) • Free Air Delivery @700Kpa (7 Bar): 100L/Min • Piston Displacement: 165L/Min • Weight: 75Kg • 3.5 CFM @ 7 Bar • 93dB

• Tank Capacity: 100L • Motor Capacity: 2.2kW • RPM: 2850/min • 230V-50Hz • Maximum Pressure: 800Kpa (8Bar) • Free Air Delivery @700Kpa

(7 Bar): 265L/Min • Piston Displacement: 370L/Min • Weight: 85Kg • 9.4 CFM @ 7 Bar • 95dB


• Tank Capacity: 150L • Motor Capacity: 2.2kW • RPM: 2850/min • 230V-50Hz • Maximum Pressure: 800Kpa (8Bar)• Free Air Delivery @700Kpa

(7 Bar): 265L/Min • Piston Displacement: 370L/Min • Weight: 115Kg• 9.4 CFM @ 7 Bar • 95dB


SANS 347: 2010

FEATURES • 2 Cylinder V style cast iron heads • AIA approved tanks • CE Approved air tank• Cast iron manifold with

quick couplers• Fully enclosed belt guard• Four wheels

FEATURES • 3 Cylinder w style cast iron heads • AIA approved tanks • Double pulley system • Pressure switch with metal gauge • Dual outlet with quick connectors,

regulator & water filter• Long reach handle

150L 2.2kW 3.0HP Lubricated Cast Iron V Head

• Tank Capacity: 150L • Motor Capacity: 2.2kW • Motor with manual overload protector • RPM: 2850/min • 220V-50Hz • Max RPM: 900 • Maximum Pressure: 800Kpa (8Bar) • Free Air Delivery @700Kpa (7 Bar): 200L/Min • Piston Displacement: 165L/Min • Weight: 75Kg • 7.1 CFM @ 7 Bar • 93dB

FEATURES • 2 Cylinder V style cast iron heads • AIA approved tanks • CE Approved air tank• Cast iron manifold with

quick couplers• Fully enclosed belt guard• Four wheels

V HE

AD &

W H

EAD

BELT

DRI

VE C

OMPR

ESSO

RS

powe

r cab

le

1.8m

work

Belt

Drive

powe

r cab

le

1.8m

work

Belt

Drive

powe

r cab

le

1.8m

work

Belt

Drive

powe

r cab

le

1.8m

work

Belt

Drive

SAF E

T Y • P



YAIA APPROVED

SAF E

T Y • P



YAIA APPROVED

SAF E

T Y • P



YAIA APPROVED



Industrial

Industrial

Industrial

Industrial





Page 8

WA

RR

AN

TY

YE

AR

COMPRESSORS

SAF E

T Y • P



YAIA APPROVED

SAF E

T Y • P



YAIA APPROVED

SAF E

T Y • P



YAIA APPROVED


SANS 347: 2010


• Tank Capacity: 200L • Motor Capacity: 2.2kW • RPM: 2850/min • 230V-50Hz • Maximum Pressure: 800Kpa (8Bar) • Free Air Delivery @700Kpa

(7 Bar): 265L/Min • Piston Displacement: 370L/Min • Weight: 125Kg• 9.4 CFM @ 7 Bar • 95dB


W HEAD BELT DRIVE COMPRESSORS

W H

EAD

BELT

DRI

VE /

PETR

OL D

RIVE

N BE

LT D

RIVE

COM

PRES

SORS

powe

r cab

le

1.8m

work

Belt

Drive

100L 4.8kW Belt Drive 4 Stroke 6.5HP Petrol Air Compressor


100L 8.2kW Belt Drive 4 Stroke 11HP Petrol Air Compressor

• Tank Capacity: 100L• Motor Capacity: 4.8kW (6.5HP)• 4 Stroke petrol motor • Maximum Pressure: 800kPa (8 Bar)• Free Air Delivery @ 700kPa (7 Bar): 265L/min• 364L/min piston displacement• Weight: 75kg• 9.4 CFM @ 7 Bar• 100dB

• Tank Capacity: 100L Heavy duty base• Motor Capacity: 8.2kW (11HP)• 4 Stroke petrol motor • Maximum Pressure: 1200kPa (12 Bar)• Free Air Delivery @ 1100kPa (11 Bar): 350L/min• 519L/min piston displacement• Weight: 130kg• 12.4 CFM @ 11 Bar• 100dBCode no: Barcode:MCFRC235 6003398053409

work

Belt

Drive

Petro

l

work

Belt

Drive

Petro

l

PETROL BELT DRIVE COMPRESSORS



Light Industrial

Industrial

Light Industrial

Page 9

WA

RR

AN

TY

YEAR

PNEUMATIC TOOLS

DUST

ERS

/ INF

LATO

RS /

WAS

H GU

NS /

UNDE

R CO

ATIN

G GU

NS

Air Duster

Code no: Barcode:TOOS1751 6003751001658

Inflating Gun

BLOWERS

TYRE INFLATOR

• Short nozzle• Maximum pressure: 9 bar• Min compressor required: 1.1kW• Pressure required: 3 - 8 barSuitable for blowing and cleaning away cuttings etc

Suitable for inflating car tyres, bicycle tyres, air beds & inflatables, balls etc

Code no: Barcode:PAB1204 6003751340719

Blow Gun


• Extended nozzle • Air inlet: 6.5mm Suitable for unblocking oilways in engines & machine parts, cleaning electrical circuit boards & computers, general cleaning duties in & around the workshop

Paraffin Spray Gun

WASH GUNS

• Cup capacity: 1000cc • Working pressure: 5 bar • Adjustable nozzle for fine or course spray • Suitable compressor: 1.1kW/ 24L & aboveUse to clean: Motor vehicles, boats, engines & outer componentsSuitable for lubrication of suspension parts & machinery


Washing Gun

• Working pressure: 405-709kPa (4-7 bar)

• 6mm Air intake • Connect to a 1/2” or 12.5mm hose pipeSuitable for: Cleaning paths, drains & patios, cleaning garden furniture, cleaning grime from car bodywork; cleaning conservatory guttering & roofs; removing rust from underneath wheel arches & vehicle bodywork


Undercoating Gun

UNDER COATING GUN

• Max Pressure: 90PSI/ 628kPa

• Working pressure: 60PSI/ 419kPa• Air consumption: 11.3CFM/ 321L/min • Feed type: Suction• Air intake: Suction • Min recommended compressor:

3HP/ 2.2kW

Code no: Barcode:TOOG747 6003751345622

Semi Industrial

DIYUse

Semi Industrial

Semi Industrial

DIYUse

Semi Industrial

Page 10

WA

RR

AN

TY

YEAR

PNEUMATIC TOOLS

Deluxe Mini HVLP Spray Gun


• Fluid nozzle: 1.4mm• 30-80PSI Operating pressure• 160-300L/min Air consumption• 6.35mm NPS (M) Air connector• 100ml Cup size• Non bleeder type, gravity feed

& external mix spray

Air Sand Blasting Kit

Code no: Barcode:TOOG749 6003751004253

Air Brush Set

SAND BLASTING GUNS

AIR BRUSH SET


Sand Blaster Gun


• Working pressure 6 bar • Suitable for: Removing old paint,

rust spots etc, renovation of plants & machinery

• Suction feed for blasting material • Min air compressor required:

3HP/ 2.2kW

Mini Gravity Feed Touch Up Gun - K3

SPRAY GUNS - GRAVITY FEED

• Gravity flow cup• 125ml Cup capacity• Air inlet 1/4”• Air pressure 20-40 PSI• Ave. air consumtion:

1.6 - 4.0 CFM• Adjustable spray pattern• Fluid adjustment knob


Gravity Feed Spray Gun

• Fluid nozzle: 1.4mm• Cup Capacity: 600ml• Max operating pressure:

3.5 - 8 bar• Average air consumption:

100 - 200L/min• Suitable compressor:

1.5kW or above



• Fluid nozzle: 1.5mm • Plastic cup: 500cc• Pattern width: 120-220mm • Working pressure: 300-400kPa (3-4 bar) • Air consumption: 350l/min - 12CFM• Suitable compressor: 2HP & above Suitable for most types of paint spraying including cellulose & oil based paints;emulsion & gloss paints for walls & ceilings, low viscosity wood stain & varnish


• Hand piece protective cap • 22cc cup • 5cc metal cap• 60cc mixing jar with lid • Spray jar • Spanner • PVC Airline hose with adaptors Suitable for: Hobby enthusiasts & model makers, fine spray nozzles, spraying with cellulose & enamel paints


• Standard Nozzle: 1.4mm• Cup Capacity: 0.6L• Average Air Consumption: 8CFM/228L/min• Recommended Air Pressure: 50 - 70PSI• 3 Control adjustment valves: a) Paint flow b) Fan adjustment c) Air control


Spare cup for S1789TOOS1792 6003751010094

SAND

BLA

STIN

G GU

NS /

AIR

BRUS

H KI

TS /

GRAV

ITY

FEED

SPR

AY G

UNS

• 2 x 6.35mm spare nozzles• 1 x air jet• Complete with 1 metre hose

and pick up tube• Minimum recommended com-

pressor 2HP/1.5kWUse to clean old paint, carbon and stubborn deposits.Adjust pressure between 300kPa and 650kPa until desired result is obtained.May be used with sand abrasive particles, liquid detergents as well as dry air for cleaning of parts and surfaces.

Semi Industrial

DIYUse

DIYUse

DIYUse

Industrial DIYUse

Page 11

WA

RR

AN

TY

YEAR

PNEUMATIC TOOLS

SPRAY GUNS - SUCTION FEED

5Pc Spray Gun Kit


CONTENTS:• Spray gun • Paraffin spray gun • Tyre Inflator • Air duster • Coiled hose

Suction Spray Gun


• Fluid nozzle: 1.5mm• Aluminium cup: 1000cc• Pattern width: 120-220mm• Working pressure: 300-400kPa (3-4 bar)• Air consumption: 350l/min - 12CFM• Air inlet: 6.5mm• Suitable compressor: 2HP & aboveSuitable for most types of paint spraying including cellulose & enamel paints; emulsion paint for walls & ceilings, low viscosity wood stain & varnish

High Pressure Spray Gun

• Standard nozzle: 1.8mm• Cup Capacity: 1L• Average Air Consumption:

7CFM / 200L/min• Recommended Air Pressure:

50-70PSI


KITS

SUCT

ION

FEED

SPR

AY G

UNS

/ ACC

ESSO

RY K

ITS

Suction Feed Low Pressure Spraygun


• Feed type: Pressure• Standard nozzle: 1.3mm• Optional nozzle: 1.2mm• Average air consumption:

3CFM / 85L/min• Cup Capacity: 0.8L• Recommended Air Pressure:

10 -40PSI• Canister Capacity: 0.8L• Paint Nozzle: 1.3mm

DIYUse

Suction Feed High Pressure Spray Gun


• Standard Nozzle: 1.6mm • Cup Capacity: 1L• Avg Air Consumption: 10CFM / 280L/min• Recommended Air Pressure:

355 - 480kPa / 3.5 - 4.8 bar• Canister Capacity: 0.8L • Adjustable spray pattern • Non-bleeder type, siphon feed• External mix nozzle • Dual Action trigger• Air inlet 1/4” BSP • Paint nozzle: 2.0mmØ• Min recommended compressor:

2HP/ 1.5kW and above

Industrial

DIYUse

Industrial

Spray Gun Holder


DIYUse

CONTENTS:• Spray Gun • Degreasing Gun • Blow Gun • Tyre inflator • Air hose & couplers


5Pc Spray Gun Kit DIYUse

DIYUse

Page 12

WA

RR

AN

TY

YEAR

PNEUMATIC TOOLS

Die Grinder 6mm Collet


100mm Angle Grinder

PNEUMATIC SANDERS • GRINDERS • DRILLS

CONTENTS:• Die grinder • 5x 6mm Moulded stones • 2x Hand wrenches • Connecting nipple • Working pressure: 695kPa/ 6.5 bar • Free speed: 22000/min• Air inlet: 6.5mm • Collet: 6mm• Avg air consumption at 100% duty cycle:

11CFM/ 311L/min• Suitable compressor: 3HP and aboveSuitable for grinding & smoothing rough castings; removing rust from metalwork; general workshop use, model making, etc.


Dual Action Sander 150mm Pad Size


• Pad size: 150mm • Free speed: 9000/min • Air inlet: 6.5mm • Avg air consumption at 100%

duty cycle: 14CFM/ 397L/min • Working pressure: 659kPa/ 6.5 bar • Min air compressor required: 3HP/ 2.2kW Suitable for: Finishing body filler, ideal for contoured surface

Reversible Air Drill


1/2” Impact Wrench & Socket Set


12.5mm Drive Ratchet Wrench

CONTENTS:• 1/2 Drive ratchet 9, 10, 11, 13, 14, 17, 19mm• 7 x 1/2” drive sockets • 2 x Extensions • Swivel • Connecting nippleWe recommend the use of an inlinelubricator (PAB1222) from the TRADEair range of accessories. You will also require an air hose to connect to your compressorSuitable for: fast removal & refitting of nuts; ideal for production line environment


• Working pressure: 6.5 bar/ 659kPa

• Avg air consumption at 100% duty cycle: 14CFM/ 396L/min

• Disc size: 100mm x 16mm bore • Free speed: 11000/min • Air inlet: 6.5mm • Suitable compressor: 4HP/ 3kW and aboveSuitable for: Car body work & metal fabrication applications

Chipping Hammer Set


IN-L

INE

LUBR

ICATO

RRE

COMM

ENDE

D

Air h

ose

REQ

IN-L

INE

LUBR

ICATO

RRE

COMM

ENDE

D

Air h

ose

REQ

IN-L

INE

LUBR

ICATO

RRE

COMM

ENDE

D

Air h

ose

REQ

•10mm Drill capacity • 6.5mm air inlet• Free speed: 1800/min • Working pressure:

608kPa/ 6.5 bar• Avg air consumption

@ 100% duty cycle: 200L/min • Fitted with a 10mm keyed chuckSuitable for: All types of wood & metal drilling, workshop & automotive use

IN-L

INE

LUBR

ICATO

RRE

COMM

ENDE

D

Air h

ose

REQ

PNEUMATIC WRENCHES • AIR HAMMER

IN-L

INE

LUBR

ICATO

RRE

COMM

ENDE

D

Air h

ose

REQ

IN-L

INE

LUBR

ICATO

RRE

COMM

ENDE

D

Air h

ose

REQ

IN-L

INE

LUBR

ICATO

RRE

COMM

ENDE

D

Air h

ose

REQ

CONTENTS:• Air hammer • 4 x Chisels • Spring retainer • Connecting nipple.• Required air pressure: 628kPa/ 6.2 bar• Avg air cons.: 5CFM/141L/min• Max speed: 3000blow/min• Air intake: 1/4” • Suggested air

compressor: 2HP/ 1.5kW or largerSuitable for: chipping tiles, paving & brickwork etc, sheet metal fabrication

CONTENTS: • 1/2” Impact wrench • 10 x 1/2” Drive impact sockets: 9, 10, 11, 13, 14, 17, 19, 22, 24, 27mm • 1/2” Drive extension bar • Mini oiler • Connecting nipple • Tube oil air tool • 16mm bolt capacity • Free speed: 7000/min • Avg air cons. @ 100% duty cycle: 23CFM/652L/min • Working pressure: 659kPa/ 6.5 bar • Min air compressor required: 3HP/ 2.2kW Suitable for: automotive applications, removing vehicle wheel nuts, metal construction applications, etc.

GRIN

DERS

/ S

ANDE

RS /

DRI

LLS

/ W

RENC

HES

/ H

AMM

ERS

DIYUse

DIYUse

DIYUse

DIYUse

DIYUse

DIYUse

DIYUse

Page 13

WA

RR

AN

TY

YEAR

PNEUMATIC TOOLS

NAIL GUN • STAPLE GUN • STAPLES • NAILSNailer/ Staple gun


• Working pressure: 608kPA/ 6 bar• Avg air consumption at 100% duty cycle:

5CFM/ 142L/min• 65mm Air intake • Minimum compressor required:

2HP/ 1.5KW• Uses F series nails: 10 - 32mm PAB1366 F10/ PAB1367 F15/ PAB1368 F20/ PAB1369 F25/ PAB1370 F30• Uses ffg staples: 6 - 32mm PAB1361 10mm long/ PAB1363 11mm long/ PAB1364 28mm longSuitable for: nailer - fixing mouldings, cladding & picture framing, stapler - use in upholstery

Finishing Nailer


• Working pressure: 608kPA/ 6 bar

• Uses T series nails• Nails: 15 - 50mmSuitable for: Fixing mouldings, cladding & picture framing

REGULATORS / FILTERS • LUBRICATORS

Air h

ose

REQ

IN-L

INE

LUBR

ICAT

ORRE

COMM

ENDE

D

IN-L

INE

LUBR

ICATO

RRE

COMM

ENDE

D

Air h

ose

REQ

18 Guage Staples 1000Pc

* For use on TRADEair stapler PAB1350

18 Guage Air Nails 1000Pc

* For use on TRADEair stapler PAB1350 & PAB1352

6.35mm Pressure Regulator/ Water Filter

• Designed to reduce moisture content in the air flow and adjust the air pressure

• 6.5mm female inlet & outlet • Complete with pressure guage

sockets • Manual pressure adjustment


• Helps to reduce wear on air tools.• Automatically lubricates air line system• 6.35mm thread


Inline Lubricator

1/4” Regulator & Water Trap Combo

Code no: Barcode:TOOR1489 6003751017192

• Maximum inlet pressure : (150PSI)• Maximum temperature: 60ºC (140F)• Maximum pressure: 10 bar

NAIL

& S

TAPL

E GU

NS /

LUBR

ICAT

ORS

1Lt Air Compressor Oil

Code no: Barcode:TOOO1286 6003751009449

Code no: Desc.: Barcode:PAB1361 10mm 6003751340887 PAB1363 19mm 6003751343901PAB1364 28mm 6003751343918

Code no: Desc.: Barcode:PAB1366 F10 6003751343925 PAB1367 F15 6003751343932PAB1368 F20 6003751343949PAB1369 F25 6003751343956 (1.22mm)PAB1370 F30 6003751343963

• For in-line lubrication of air tools; with rust inhibitors to prevent internal corrosion of components

DIYUse

DIYUse

Page 14

WA

RR

AN

TY

YEAR

PNEUMATIC TOOLS

Coupler Quick 1/4“ BSP Female

Code no: Barcode:TOOC340 6003751002686

Coupler 1/4“ BSP Female

HOSE FITTINGS • TAIL PIECES • COUPLINGS


Coupler 1/4“ BSP Male


Coupler 8mm Air Hose


Tail Pc 8mm Hose 1/4“ BSP Male


Hose To Split Nut Fitting 6mm


5Pc 8mm Air Hose Coupler Set

CONTENTS:• 8mm Hose to 1/4” BSP male fitting• 6.35mm BSP male coupler• 6.35mm BSP female air quick coupler• 6.35mm BSP female air coupler• 8mm Air hose coupler Code no: Barcode:

TOOC348 6003751002280

HOSE

FIT

TING

S / C

OUPL

INGS

/ AI

R HO

SES

PVC HIGH PRESSURE HOSE

PVC Airline Hose With Fittings

Code no: Barcode:TOOH910 6003751009616

Rubber High Pressure Air Hose• Double layer re-inforced PVC airline hose • Resistant to fuels, oils, solvents & chemicals • Strong polvin / nylon contruction • 1750kPa Test pressure • 6mm x 10m length with fittings • Will not kink or reduce air flow • N.O.S.A blue, colour coding

PVC High Pressure Air/Water Hose

• Abrasion & weather resistant - wont kink

• Ideal for high pressure lines & compressors

• 1750kPa Pressure

Code no: Desc.: Barcode:TOOH501 6mm x 20m 6003751011367 TOOH502 8mm x 20m 6003751011374TOOH503 10mm x 20m 6003751011381TOOH506 6mm x 100m 6003751028839TOOH507 8mm x 100m 6003751025548TOOH508 10mm x 100m 6003751028846TOOH514A 8mm x 10m 6003751028846

Code no: Desc.: Barcode:TOOH509 6mm x 20m 6003398068830 TOOH510 8mm x 20m 6003398068847TOOH511 6mm x 100m 6003398068854TOOH512 8mm x 100m 6003398068861TOOH513 10mm x 100m 6003398068878

• Abrasion & weather resistant - wont kink

• Ideal for high pressure lines & compressors

• 1750kPa Pressure

Page 15

PNEUMATIC TOOLS

WA

RR

AN

TY

YEAR

100mm Air Blow Gun

Code no: Barcode:PUAA5006 6003751004512

Professional Air Blow Gun

BLOW GUNS, DUSTER AND GREASE GUN


300mm Air Blow Gun

Code no: Barcode:PUAA5006-3 6003751009210

Air Duster


Professional Air Grease Gun

Code no: Barcode:PUAT6036 6003751005144

• Body material: Plastic P.O.M • Nozzle: Steel 100mm• Working pressure: 115PSI/ 8kg/cm2

• Max pressure: 156PSI/ 11kg/cm2

• Air inlet: 1/4” PT (NPT)

• Aluminium • Working pressure: 115PSI/ 8kg/cm2



• Body material: Plastic P.O.M • Nozzle material: Steel 100mm• Working pressure: 115PSI/ 8kg/cm2



• Aluminium • Working pressure: 115PSI/ 8kg/cm2



• Capacity (bulk): 400cc • Capacity (cartridge): 14oz• Pressure tested:

1200 - 6000PSI at 30 - 120PSI• Loading ways:

C105 - Stand 14 or 14.5 / C107: Grease cartridge / C108: Loading with dispenser / C109: Loading with bulk grease

• Min compressor required: 2HP

HEAV

Y DU

TY B

LOW

GUN

S / D

USTE

R / G

REAS

E GU

N

Semi Industrial

Industrial

Semi Industrial

Semi Industrial

Industrial

Page 16

PNEUMATIC TOOLSW

AR

RA

NT

Y

YEAR

HEAV

Y DU

TY S

PRAY

GUN

S / D

RILL

S / S

CREW

DRIV

ERS

PNEUMATIC DRILLS • SCREWDRIVERS10mm Chuck Air Drill


10mm Professional Angle Air Drill with Chuck


13mm Professional Air Drill with Chuck


1800RPM Professional Air Screwdriver


• 10mm Drilling capacity • Free speed: 1800/min • 6.5mm Air inlet • Avg air consumption @

100% duty cycle: 7CFM • Working air pressure: 6.5 bar • Reversible pistol action • Min compressor required: 2.5HP

• 13mm Drilling capacity • Free speed: 400RPM• 6.5mm Air inlet • Ave air consumption @ 100%

duty cycle: 10CFM • Working air pressure: 6.5 bar • Reversible pistol grip • Min compressor required: 3HP

• 6.35mm Hex shank size • 6mm bolt size• Free speed: 1800/min • 52 - 130kg.cm max torque • 1/4” Air inlet• Avg air consumption @

100% duty cycle: 7CFM • Pistol adjustable clutch • 6.5 Bar working air pressure • Min compressor required:

2.5HP

• 10mm Drilling capacity • Free speed:1900/min• 6.5mm Air inlet • Avg air consumption

@ 100% duty cycle: 7CFM• Working air pressure: 6.5 bar • Non reversible angle action• Min compressor required: 2.5HP

Domestic Industrial

Industrial Industrial

Oil & Water Separator


1/4” Mini In-Line Oiler


• 6.5mm female & male inlet• Do not use on spray guns

• A good spray job requires clean air, free from oil & water

• This simple device is easily attached between your spray gun and air line and re-moves water and oil with very little pressure reduction

Deluxe Mini HVLP Suction Feed Spray Gun

Code no: Barcode:PUAS1040 6003751004567

• Standard nozzle: 1.6mm• Optional nozzle: 1.0, 1.5, 1.8 & 2.0mm • Capacity of cup: 1.0 litre• Air inlet: 1/4” • Air hose: 3/8”• Average air consumption: 10CFM/280L/min• Nett weight: 1.1kg• Recommended air pressure: 30-50PSI

Semi Industrial

Semi Industrial

PNEUMATIC ACCESSORIES

High Pressure Spray Gun

Code no: Barcode:PUAB1006 6003751003201

SPRAY GUNS

• Nozzle: 0.3mm • Working air pressure: 15-45PSI • Air consumption: 0.4 - 0.8CFM

• Cup capacity: 20cc, Screw-on type cup • Double action trigger - air/paint control • Adaptor permits use with propel can or air

compressor Excellent for fine art work and hobby crafts such as: photo-retouching, fine drawings, illustrations, pricing plastic items by application of colour inks, watercolours, lacquers, design colours,acrylic colours etc

Domestic

Page 17

PNEUMATIC TOOLS

WA

RR

AN

TY

YEAR

Air Sander


• Two piston

1/4” Air Die Grinder


• Free speed: 22000RPM • Overall length: 160mm• Air inlet: 6.5mm • Capacity bolt size: 6mm• Average air consumption

at 100% duty cycle: 11 CFM• Work air pressure: 6.5 bar • Min compressor required: 3HP

PNEUMATIC DIE GRINDERS

1/4” Air Die Grinder Kit

Code no: Barcode:PUAT7033K 6003751005311

• 1x AT7033 • 1x Blow mould case • 2x Wrenches • 10 x Grinding stones• Free speed: 22000RPM • Overall length: 160mm • Air inlet: 6.5mm• Capacity bolt size: 6mm • Average air consumption at

100% duty cycle: 11 CFM • Work air pressure: 6.5 bar • Min compressor required: 3HP

1/4” Extended Air Die Grinder

Code no: Barcode:PUAT7033L 6003751005328

• Free speed: 25000RPM • Air inlet: 6.5mm• Average air consumption

@ 100% duty cycle: 5 CFM• Work air pressure: 6.5 bar• Min compressor required: 2.5HP

HEAV

Y DU

TY S

CREW

DRIV

ERS

/ GRI

NDER

S / S

ANDE

RS /

GRIN

DERS

Domestic

Domestic Domestic

150mm Professional Dual Action Air Sander

Code no: Barcode:PUAT7015P 6003751005212

800RPM Professional Air Screwdriver

Code no: Barcode:PUAT4080A 6003751020826

• 6.35mm Hex shank size • 6mm bolt size• Free speed: 800/min • 52 - 167kg.cm max torque • 1/4” Air inlet• Ave air consumption

@ 100% duty cycle: 7CFM • Pistol adjustable clutch • 6.5 bar Working air pressure • Min compressor required: 2.5HP

• Spindle thread: 150mm • Free speed: 9000/min• Air inlet: 6.5mm • Air hose: 3/8” • Average air consumption at

100% duty cycle: 14CFM • Work air pressure: 6.5 bar • Min compressor required: 4HP


PNEUMATIC GRINDERS • SANDERS125mm Professional Air Angle Grinder

• Free speed: 11 000/min • Air inlet: 6.5mm• Average air consumption at

100% duty cycle: 14CFM• Working air pressure: 6.5 bar • Min compressor required: 4HP

5” Air Orbital Sander


• Sand paper: 93 x 228mm • Free speed: 8000/min • Air inlet: 6.5mm • Air hose: 3/8” • Average air consumption at

100% duty cycle: 14 CFM • Working air pressure: 6.5 bar • Min compressor required: 4HP


Industrial Domestic

Page 18

PNEUMATIC TOOLSW

AR

RA

NT

Y

YEAR

HEAV

Y DU

TY W

RENC

HES

12.5mm Drive Impact Wrench


• 16mm Bolt capacity • 7 000RPM Free speed• 230kg/cm 350ft/lbs Max Torque • 6.5mm Air inlet • Avg air consumption @

100% duty cycle: 27CFM • Working air pressure: 6.5 bar• Pin clutch type • Min compressor required: 5Hp

12.5mm Drive Impact Wrench


• 16mm Bolt capacity • 7000RPM Free speed• 55kg/cm 400ft/lbs Max Torque • 6.5mm Air inlet • Avg air consumption

@ 100% duty cycle: 23CFM • Working air pressure: 6.5 bar• Twin hammer clutch type • Min compressor required: 5HP

19mm Drive Professional Impact Wrench


• 25mm Bolt capacity • Free speed: 4500/min • 69kg/cm 500ft/lbs Max Torque • 10mm Air inlet • Avg air consumption

@ 100% duty cycle: 30CFM • Working air pressure: 6.5 bar• Single hammer clutch type • Min compressor required:

7.5HP

19mm Drive Impact Wrench


• 19mm Bolt capacity • Free speed: 4200/min • 100kg/cm 700ft/lbs Max

Torque • 6.5mm Air inlet • Avg air consumption

@ 100% duty cycle: 30CFM • Working air pressure: 6.5 bar • Pin clutch type • Min compressor required:

7.5HP



PNEUMATIC IMPACT WRENCHES12.5mm Professional Drive Impact Wrench


• 16mm Bolt capacity • 7000RPM Free speed• 27kg/cm 220ft/lbs Max Torque • 6.5mm Air inlet • Avg air consumption

@ 100% duty cycle: 26CFM • Working air pressure: 6.5 bar• Single hammer clutch type • Min compressor required: 4HP

17Pc 12.5mm Drive Professional Impact Wrench Kit


• 1Pc 12.5mm Drive Impact Wrench • 10 Pc Air Sockets:10,11,12,13,15,17,19,21,22,24,mm• 1Pc 5” Extension Bar • 1Pc Oil Pot• 1Pc Hex Wrench • 1Pc Nipple• 1Pc Plastic Case • 1Pc Mini Oiler• 16mm Bolt capacity • Free speed: 7000/min• 30kg/cm 220ft/lbs Max Torque • 6.5mm Air inlet • Avg air consumption @ 100%

duty cycle: 23CFM • Working air pressure: 6.5 bar • Single hammer clutch type • Min compressor required: 5HP

12.5mm Professional Drive Impact Wrench


• 16mm Bolt capacity • Free speed: 7 000/min• 32kg/cm 230ft/lbs Max Torque • 6.5mm Air inlet • Avg air consumption

@ 100% duty cycle: 23CFM • Working air pressure: 6.5 bar• Pin clutch type • Min compressor required: 5HP

IndustrialIndustrial

Industrial

Page 19

PNEUMATIC TOOLS

WA

RR

AN

TY

YEAR

190mm Air Hammer With 4 Chisels (Round)

Code no: Barcode:PUAT2020/R 6003751004680

Universal Spring Retainer


• Chisel shank: 10mm • Piston bore: 19.05mm • Piston stroke: 66mm• Blow per minute: 3 000/min • Air inlet: 6.5mm • Air hose: 3/8”• Avg air consumption at

100% duty cycle: 9CFM• Working air pressure: 6.5 bar • Min compressor required: 3HP • 1 Pc Air hammer

• 1 Pc Air nailer scaler attachment (AT-2071)

• 1 Pc Inlet adaptor • 1 Pc Mini oiler • 1 Pc Retainer • 5 Pc 7” Chrome molybdenum

chisels

• For use with PUMA 190mm Air hammer PUAT2020/R

HEAV

Y DU

TY W

RENC

H / R

ATCH

ET W

RENC

H / T

OOL

OIL

/ HAM

MER

S

Industrial

Industrial

PNEUMATIC HAMMER


PNEUMATIC RATCHET WRENCHES10mm Drive Air Ratchet Wrench

• 10mm Bolt capacity • Free speed: 160/min • 6.9kg/cm 50ft/lbs Max Torque • 6.5mm Air inlet • Avg air consumption @ 100% duty cycle: 18CFM • Working air pressure: 6.5 bar • Twin hammer clutch type • Min compressor required: 2.5HP

13mm Drive Air Ratchet Wrench


• 13mm Bolt capacity • Free speed: 160/min • 6.9kg/cm 50ft/lbs Max Torque • 6.5mm Air inlet • Avg air consumption @ 100% duty cycle: 18CFM • Working air pressure: 6.5 bar • Single hammer clutch type • Min compressor required: 2.5HP

1Lt Air Tool Oil

Code no: Barcode:TOOO1285 6003751005526

• For in-line lubrication of air tools• With rust inhibitors to prevent internal

corrosion of components

150 x 25mm Drive Impact Wrench

• 32mm Bolt capacity • Free speed: 3000/min • 152kg/cm 900ft/lbs Max Torque • 12.5mm Air inlet • Avg air consumption @ 100% duty cycle: 53CFM • Working air pressure: 6.5 bar • Twin hammer clutch type • Min compressor required: 10HP


Industrial Domestic

Domestic Industrial

Page 20

PNEUMATIC TOOLSW

AR

RA

NT

Y

YEAR

Nails - F Series

Code no: Spec: Barcode:PUF15 15mm 6003751005403PUF20 20mm 6003751005410PUF25 25mm 6003751005427PUF30 30mm 6003751005434

Professional Air Stapler


PNEUMATIC STAPLE GUN • NAIL GUN

Professional F30 Air Nailer


• Crown: 11.2mm • Shank width: 1.20mm• Gauge 20 • Uses J series staples • Staple length: 10 - 22mm• Average air consumption

@ 100% duty: 3CFM• Working air pressure: 6.5 bar • Min compressor required: 2HP

• Crown: 9.1mm • Shank width: 1.25mm• Gauge: 18 • Uses F series staples• Average air consumption

@ 100% duty: 5CFM• Working air pressure: 6.5 bar • Min compressor required: 2HP

5000PC PER BOX• Guage: 18• Thickness: 1.25mm

Nails - T Series Staples - J Series

Code no: Spec: Barcode:PUT20 20mm 6003751005441PUT25 25mm 6003751005458PUT32 32mm 6003751005465PUT38 38mm 6003751005472PUT45 45mm 6003751005489PUT50 50mm 6003751005496

2500PC PER BOX• Guage: 16• Thickness: 1.6mm

Code no: Spec: Barcode:PU1010J 10mm 6003751017819PU1013J 13mm 6003751007803PU1016J 16mm 6003751017826PU1019J 19mm 6003751017833PU1022J 22mm 6003751017840

5000PC PER BOX• Guage: 20 • Crown: 11.2mm• Thickness: 0.6mm


Industrial Industrial Industrial

PUMA PNEUMATIC FASTENERS

4.8mm Air Hydraulic Riveter


PNEUMATIC RIVET GUNS

Professional Air Hydraulic Riveter Kit

Code no: Barcode:PUAT6015K 6003751005076

• Traction power: 720kg • Stroke length:14mm • Overall length: 273mm• Air inlet: 1/4” • Average air consumption

@ 100% duty cycle: 4 CFM• Nett weight: 1.5kg • Work air pressure: 6.5 bar• Min compressor required: 2HP

• Average air consumption @ 100% duty cycle: 4 CFM• Traction power: 720kg • Stroke length:14mm • Overall length: 273mm • Air inlet: 1/4” • Nett weight: 1.5kg • Work air pressure: 6.5 bar• Min compressor required: 2HP• AT6015 Air riveter • Air hose joints • Rivets • Oiler • Nose pieces: 3/32”, 1/18”, 5/32” • 3/16” Jaw case • Jaw • Jaw case joint • Jaw pusher • Return springs • Valve pusher spring • Jaw pusher spring • Frame O-rings • Frame back-up rings • Oil piston O-rings & back-ups • Hanging clip O-ring • Frame joint O-ring & back ups • Frame brass joint • Valve pusher O-rings • Valve • Valve cap O-ring• Air piston ring • Lock nut O-ring • Air cylinder O-ring • Spanner gauge • Spanner • Blowmould case


HEAV

Y DU

TY W

RENC

HES

Documents

COMPRESSORS & PNEUMATIC TOOLS...2020/02/09 · The above air tool recommendations are based on Average CFM = 25% duty cycle of tool ( i.e. continuous running for 15 seconds) KEY MCFRC100