Upload
dinhduong
View
216
Download
0
Embed Size (px)
Citation preview
FittingMaster®
Clamp-Loc®
Mighty-Tite®
CREATE PROFESSIONAL OEM HOSES
BRAZING PRODUCTS TOOLS FITTINGS HOSE
Make the Connection Call Toll Free: 1-888-776-0471
COMPRESSOR TECH, INC.
www.achoserepair.com
INDEX
PRODUCTS Page 1 - Front Cover
Page 2- Index Page 3 - Brazing Products
Page 4 - Beadlock Start-Up Kit
Page 5 - FittingMaster Ferrules
Page 6 - FittingMaster Braze-On Fittings
Page 7 - Clamp-Loc Start-Up Kit
Page 8 - Clamp-Loc Products
Page 9 - Aluminum Fittings
Page 10 - Steel Fittings
Page 11 - Hose Cutter & Retro-Fit Products
Page 12 - Goodyear 4826 Hose
Page 13 - Goodyear 4890 Hose
Page 14 - Mighty-Tite Crimp Tools
Page 15- Mighty-Tite Crimp Tools
TECHNICAL PROCEDURES
Page 16 - Don’t Throw Money Away
Page 17 - Clamp-Loc Repair Procedure
Page 18 - Braze-On Fitting Repair Procedure
Page 19 - Beadlock Repair Procedure
Page 20 - Back Cover
Page 2 COMPRESSOR TECH, INC.
AFC-1000 (Aluminum)
SFC-2000 (56 % Silver)
AFC-1000 OEM Flux Cored Aluminum Brazing Rod (25 pk)
SFC-2000 OEM Flux Cored 56 % Silver Brazing Rod (6 pk)
BRAZING PRODUCTS
Brazing made simple and easy with our flux core rod.
Cadmium Free
Aluminum Brazing Headaches?
Create professional brazed joints like this.
1-888-776-0471 Page 3
BEADLOCK START-UP KIT
Kit contains :
Qty Part # Description Material
4 FMB-0606-AL #6 - 3/8 OD Tube to 5/16 ID Hose Alum.
4 FMB-0808-AL #8 - 1/2 OD Tube to 13/32 ID Hose Alum.
4 FMB-1008-AL #10/08 - 5/8 OD Tube to 13/32 ID Hose Alum.
4 FMB-1010-AL #10 - 5/8 OD Tube to 1/2 ID Hose Alum.
4 FMB-1012-AL #10/12 - 5/8 OD Tube to 5/8 ID Hose Alum.
4 FMB-1212-AL #12- 3/4 OD Tube to 5/8 ID Hose Alum.
4 FMB-12MM08-AL #12mm/08 - 12mm OD Tube to 13/32 ID Hose Alum.
4 FMB-14MM10-AL #14mm/10 - 14mm OD Tube to 1/2 ID Hose Alum.
4 FMB-0606-S #6 - 3/8 OD Tube to 5/16 ID Hose Steel
4 FMB-0808-S #8 - 1/2 OD Tube to 13/32 ID Hose Steel
4 FMB-1008-S #10/08 - 5/8 OD Tube to 13/32 ID Hose Steel
4 FMB-1010-S #10 - 5/8 OD Tube to 1/2 ID Hose Steel
4 FMB-1012-S #10/12 - 5/8 OD Tube to 5/8 ID Hose Steel
4 FMB-1212-S #12- 3/4 OD Tube to 5/8 ID Hose Steel
6 FMF-06 Fitting Master #6 Ferrule Steel
6 FMF-08 Fitting Master #8 Ferrule Steel
6 FMF-10 Fitting Master #10 Ferrule Steel
6 FMF-12 Fitting Master #12 Ferrule Steel
1 AFC-1000 OEM Flux Cored Aluminum Brazing Rod (25 pk) Alum.
1 SFC-2000 OEM Flux Cored 56 % Silver Brazing Rod (6 pk) Silver
FittingMaster®
Page 4 COMPRESSOR TECH, INC.
FITTING MASTER FERRULES Beadlock Repair (Page 19)
Use With 4826 Series Hose
Or Simular Dimensioned Hose (Page 12)
Create Professional OEM Hoses and Repairs
FittingMaster®
Part # Description
FMF-06 Fitting Master #6 Ferrule 25 Per Pk
FMF-08 Fitting Master #8 Ferrule 25 Per Pk
FMF-10 Fitting Master #10 Ferrule 25 Per Pk
FMF-12 Fitting Master #12 Ferrule 25 Per Pk
1-888-776-0471 Page 5
FITTING MASTER BRAZE-ON FITTINGS
FMB Series can also be used with CLAMP-LOC Products
Fitting end can be brazed to the tube, ferrule installed after brazing
therefore the ferrule will not be distempered or discolored from heat.
Machined fitting is designed to allow
maximum compression from the minor
diameter of the MIGHTY-TITE crimp dies
on the smooth portion of the fitting.
Use With 4826 & 4890 Series Hose(Page12 & 13)
Or Similar Dimensioned Hose (Page 12 & 13)
Page 6 COMPRESSOR TECH, INC.
CLAMP-LOC PRODUCTS
(Reduced Barrier Hose) 4890
Stainless Steel Clamps Have Inner Liner To Provide 360° Seal.
CL-100 Horizontal & Vertical Clamp-Loc Pliers
CL-200 3 Lever Ratcheting Clamp-Loc Pliers
Page 8 COMPRESSOR TECH, INC.
ALUMINUM FITTINGS
Commonly used aluminum fittings in stock.
For additional part numbers see price sheet.
1-888-776-0471 Page 9
BL1301 O-Ring Female Straight #6
BL1302 O-Ring Female Straight #8
BL1303 O-Ring Female Straight #10
BL1304 O-Ring Female Straight #12
BL1307 O-Ring Female Straight #10>#12
BL1311 O-Ring Female 45° #6
BL1312 O-Ring Female 45° #8
BL1313 O-Ring Female 45° #10
BL1321 O-Ring Female 90° #6
BL1322 O-Ring Female 90° #8
BL1322-3 O-Ring Female 90° #8 w/16mm SV
BL1323 O-Ring Female 90° #10
BL1323-3 O-Ring Female 90° #10 w/13mm SV
BL1324 O-Ring Female 90° #12
BL6101 Splicer Straight #6
BL6101-3 Splicer Straight #6 w/16mm SV
BL6102 Splicer Straight #8
BL6102-3 Splicer Straight #8 w/16mm SV
BL6103 Splicer Straight #10
BL6103-3 Splicer Straight #10 w/13mm SV
BL6103-9 Splicer Straight #10 w/16mm SV
BL6104 Splicer Straight #12
BL6104-3 Splicer Straight #12 w/13mm SV
STEEL FITTINGS
Commonly used steel fittings in stock.
For additional part numbers see price sheet.
Page 10 COMPRESSOR TECH, INC.
SB1301 O-Ring Female Straight #6
SB1301-3 O-Ring Female Straight #6 w/16mm SV
SB1302 O-Ring Female Straight #8
SB1302-3 O-Ring Female Straight #8 w/16mm SV
SB1303 O-Ring Female Straight #10
SB1304 O-Ring Female Straight #12
SB1311 O-Ring Female 45° #6
SB1312 O-Ring Female 45° #8
SB1312-3 O-Ring Female 45° #8 w/16mm SV
SB1313 O-Ring Female 45° #10
SB1321 O-Ring Female 90° #6
SB1321-3 O-Ring Female 90° #6 w/16mm SV
SB1322 O-Ring Female 90° #8
SB1322-3 O-Ring Female 90° #8 w/16mm SV
SB1323 O-Ring Female 90° #10
SB1323-3 O-Ring Female 90° #10 w/13mm SV
SB1324 O-Ring Female 90° #12
SB1324-3 O-Ring Female 90° #12 w/13mm SV
SB1325 O-Ring Female 90° #6>#8
SB1326 O-Ring Female 90° #8>#10
SB1401 O-Ring Male Straight #6
SB1402 O-Ring Male Straight #8
SB1403 O-Ring Male Straight #10
SB1404 O-Ring Male Straight #12
SB1411 O-Ring Male 45° #6
SB1421 O-Ring Male 90° #6
SB1422 O-Ring Male 90° #8
SB1423 O-Ring Male 90° #10
SB1424 O-Ring Male 90° #12
SB1801 Insert Male Straight #6
SB1802 Insert Male Straight #8
SB1803 Insert Male Straight #10
SB1804 Insert Male Straight #12
HOSE CUTTER & RETRO-FIT PRODUCTS
FM-1000 FM-2000A1
Designed To Seal With Low Torque
Mighty-Tite Hose Cutter Cuts Clean and Square Every Time.
1-888-776-0471 Page 11
Part # Description Per Pk
FM-1000 Retrofit Kit 1
FM-2000A1 Retrofit Assorted Kit 1
FM-716-038 Retrofit GM Primary Adaptor 25
FM-716-13 Retrofit Blue Cap 7/16 Low Side 25
FM-038-16 Retrofit Red Cap 3/8 High Side 25
FM-716-16 Retrofit Black Cap 7/16 High Side 25
FM-038-90X Retrofit 3/8 90' Univ Adaptor 25
FM-716-90X Retrofit 7/16 90' Univ Adaptor 25
FM-038T Retrofit 3/8 Termination Cap 25
FM-716T Retrofit 7/16 Termination Cap 25
FM-12L Label Retrofit Embossable Label 100
MT-5000C
Two Polyester spiral barrier hose J51 AII Outside Diameters Temperature Range -22°F to 257° F (-30°C / 125°C) Compatible with R-12 / R134a refrigerants & Mineral oil / PAG's Meets J2064 "TYPE C Class II" Hose Performance Low Volumetric Expansion Dimensionally Stable Flexible -- Easy to Route
Goodyear Hose 4826
Size (Inch)
Diameter (Inch) Mighty - Tite Crimp Diameter
Inside Outside Weight
min max min max Minor Band Color
lbs / ft
#6 5/16 0.307 0.337 0.719 0.781 0.654 Red 0.20
#8 13/32 0.401 0.436 0.875 0.937 0.801 Blue 0.28
#10 1/2 0.490 0.535 0.969 1.031 0.892 Black 0.33
#12 5/8 0.615 0.660 1.094 1.156 1.012 White 0.38
Page 12 COMPRESSOR TECH, INC.
Four times the reduction in R134A permeation vs. current Galaxy 4860
Dimensionally equivalent to Goodyear 4860 hose
Improved Butyl cover provides significant reduction in moisture ingression
Incorporates an improved Poly-amide barrier between two elastomeric layers
Goodyear Hose 4890
Size (Inch)
Diameter (Inch) Mighty - Tite Crimp Diameter
Inside Outside Weight
min max min max Minor Band Color
lbs / ft
#6 5/16 0.309 0.339 0.560 0.600 N/A N/A 0.09
#8 13/32 0.410 0.440 0.660 0.700 0.654 Red 0.12
#10 1/2 0.490 0.530 0.745 0.785 N/A N/A 0.13
#12 5/8 0.615 0.655 0.910 0.950 0.892 Black 0.20
4897
#14 3/4 0.745 0.785 1.105 1.145 1.012 White 0.24
Goodyear Hose 4890
Size (Inch)
Diameter (Inch) Clamp-Loc Clamp Selection
Inside Outside Weight
min max min max lbs / ft
#6 5/16 0.309 0.339 0.560 0.600 15.5 mm 0.09 #8 13/32 0.410 0.440 0.660 0.700 18.5 mm 0.12
#10 1/2 0.490 0.530 0.745 0.785 21.0 mm 0.13 #12 5/8 0.615 0.655 0.910 0.950 24.5 mm 0.20
1-888-776-0471 Page 13
MIGHTY-TITE CRIMPING TOOLS
Heavy Duty
High Performance
Manuel Portable Crimper w/Case
Forged and Hardened Steel Frames
Quick Change Color Coded Die Sets
Bench Mounted or Portable
Bench Mounted High Production Unit
Nickel Plated Hardened Dies
3 Second Cycle Time
MT-3000
Page 14 COMPRESSOR TECH, INC.
MT-1000
MIGHTY-TITE CRIMPING TOOLS
Complete Hydraulic Actuated
Crimping Tool With 10,000 PSI
Pump and Hose
Bench Mounted or Portable - Complete With Color Coded Dies
Hardened and Forged Steel Frames
Crimp Head and Dies Only
Without Pump and Hose
MT-2000H
MT-2000
1-888-776-0471 Page 15
DON’T THROW MONEY AWAY
Cut Off and Save All Of Your Old Metric, Standard and Springlock Fitting Ends
From Evaporators, Accumulators, Condensers Etc.
YOU NEVER KNOW WHEN ONE OF THESE FITTING ENDS WILL
ENABLE YOU TO PULL A RABBIT OUT OF THE HAT !!! THE ART OF CONNECTING IS ENDLESS, YOU ARE
ONLY LIMITED BY YOUR OWN CREATIVITY.
Some Examples Below Of What You Can Make Out Of A Saved Male Springlock Accumulator Tube.
90 Degree #10 Male Springlock
45 Degree #10 Male Springlock
Straight #10 Male Springlock
Page 16 COMPRESSOR TECH, INC.
CLAMP-LOC REPAIR PROCEDURE
Verify Fitting Orientation (Fitting Clock Position) Before Starting.
1 Cut Tube
2
Clean & Braze
Use Gentle Heat For Aluminum Brazing. Bring Temperature Up Slowly and Evenly.
Base Alloys Have a Melting Temperture of About 1250°F. The AFC-1000 Melts At About 1000 °F.
It’s All About Controlling Your Heat.
3 4
Cut Hose Clean Lubricate Clamps With WD 40 and Square. or Equivalent. Install Clamps
and Position On Hose End. Install on Fitting End .
5 Compress Clamps Straight And Evenly. Working Back To Front, Front To Back
Until Clamps Are Fully Compressed.
1-888-776-0471 Page 17
BRAZE-ON FITTING REPAIR PROCEDURE
Verify Fitting Orientation (Fitting Clock Position) Before Starting.
1 Cut Tube
2
Clean & Braze
Use Gentle Heat For Aluminum Brazing. Bring Temperature Up Slowly and Evenly.
Base Alloys Have a Melting Temperture of About
1250°F. The AFC-1000 Melts At About 1000 °F. It’s All About Controlling Your Heat.
3 4
Cut Hose Clean Install Ferrule & Hose.
and Square.
5 Center The Wide Opening At
90° Or 270° ( 3 Or 9 O’Clock ) As Shown In Figure 4 Page 19.
Page 18 COMPRESSOR TECH, INC.
BEADLOCK REPAIR PROCEDURE
Verify Fitting Orientation (Fitting Clock Position) Before Starting.
1 Cut Existing Beadlock Ferrule.
2 Separate Ferrule From Beadlock Groove.
3 Remove Ferrule & Hose From Tube.
(Inspect Tube End For
Scratches & Deformities)
4
Intersect Repair Ferrule In Beadlock Groove, Insert Hose & Crimp With The Wide Opening Centered At 90° Or 270° ( 3 Or 9 O’Clock )
As Shown.
(Fig. 4)
FINISHED REPAIR
1-888-776-0471 Page 19
COMPRESSOR TECH, INC.
Mail To: Ship To: P.O. Box 1740 1796 Clearwater Largo Rd. Largo, FL 33779 Clearwater, FL 33756
1-888-776-0471 +1 011 1-727-584-0836
Email: [email protected]
Website: www.achoserepair.com
Compressor Tech, Inc. was established in 1987 and has been serving the industry for over 20 years. We are committed to provide you, our customers, with user friendly products of integrity.
All product FOB Clearwater, FL
Major credit cards accepted.
Check our web site periodically for new
products and testimonials.
All Rights Reserved by Compressor Tech, Inc. Copyright © 2002-2008