1

Compressor Substitution Guide This publication contains compressor information pertaining to compressors used in Unitary Products Group (UPG) equipment and with cross-reference/substitution application to Unitary equipment throughout the industry. The following instruction will explain how to use the three main listings in this publication to determine a suitable replacement compressor for most requirements. Prior to using the information in this publication, please review the Compressor Specification Column Headings information on page 2 to become familiar with what they represent.

SUBSTITUTION GROUP LISTING This listing sorts the compressor by substitution groups. The substitution groups are sorted by capacity and voltage characteristics and as well as providing other important specifications. To find a 5 ton 208/230-1-60 Copeland compressor, for example, you can review the CAPY (MBH) column to find compressors in the 55-65 MBH range. You will then note all of the 5 Ton Copelands in group Q1A. You can then get an idea of the compressors availability by reviewing the Preferred column. You will note that S1-ZR57K3E-PFV-930 is one of the preferred compressors of the substitution group and should generally be available. However, you will also note that inventory may still be available for S1-ZR57K3-PFV-930. Therefore, you may order any number marked YES or YES/LS that have compatible compressor oil per GRP column notes. If you order any number in group Q1A, Parts Order Management will fill your order with any of the compressors which are available in stock. If you prefer that a substitute is not made for the specific compressor you are ordering, state on your order do not substitute. Note however, compressors coded NONLA are no longer available.

MODEL NUMBER CROSS-REFERENCE The second listing sorts the compressor by manufacturers model number in alphanumeric sequence. You may wish to use this listing as the starting point when you are trying to help a customer find a replacement compressor and the only information available is the manufacturers model number. Look through the listing for the manufacturers model number and bill of material number to find a matching number to the one you need. Once you have located a matching number(s) you can easily reference the UPG part number. Check the Preferred column next, if the column indicates YES or NO-LS, order the compressor. If any other indication is given in the Preferred column refer to the Group column to determine the compressor substitution group, then refer to the Substitution Group Listing and follow the procedures outlined above.

UPG PART NUMBER NUMERIC LISTING The third listing sorts the compressor in UPG part number sequence. Use this listing to reference the substitution group number of each compressor or to check on its preferred status. This listing will help guide you to more information about the specific compressor. Look up the UPG part number in this listing, then refer to the appropriate substitution group in the Substitution Group Listing to review the compressors specifications and potential substitute alternatives.

2

GRP Indicates the substitution GROUP to which each compressor belongs. The compressors within the same group have the same general characteristics and can be used in place of one another in most applications. A compressor group may include special characters * or ^, compressor with this designation may be used as substitutes within the group as noted.

PREF Indicates the PREFERRED compressor of each group. The preferred compressor represents

the compressor on which UPG is Standardizing or indicates the status at publication date of each compressor as follows:

YES The preferred compressor of the group. YES/LS Another preferred compressor of the group, but a compressor for which

inventory is in limited supply (LS) at time of printing this booklet. NO-NLA Not the preferred compressor of the group and inventory is no longer

available (NLA). Order another compressor within this group coded YES or YES/LS.

PENDING The compressor is in the set-up process; not presently available from UPG.

UPG P/N The UPG Part Number under which compressors may be ordered. MFG MODEL NO The compressor Manufacturers Model Number. MFG B/M NO The compressor Manufacturers Bill of Material Number . V-PH-HZ The Volts-Phase-Hertz specifications of the compressor. MBH The Capacity Rating of the compressor in thousands of BTUs per hour

(MBH) at ARI temperature conditions. RLA Rated Load Amps RUN CAP Run Capacitor MFD and Voltage Rating. SUC ID Suction Line Inside Diameter in inches. DIS ID Discharge Line Inside Diameter in inches. FOOT MTG The Foot Mounting configuration in inches. HGT The overall Height. HTR Indicates if an immersion type Crankcase Heater is included with the

compressor. Y Yes, N No, W Well

3

Compressor Substitution Guide This publication contains compressor information pertaining to compressors used in Unitary Products Group (UPG) equipment and with cross-reference/substitution application to Unitary equipment throughout the industry. The following instruction will explain how to use the three

requirements. Prior to using the information in this publication, please review the Compressor Specification Column Headings information on page 2 to become familiar with what they represent.

SUBSTITUTION GROUP LISTING This listing sorts the compressor by substitution groups. The substitution groups are sorted by capacity and voltage characteristics and as well as providing other important specifications. To find a 2.5 ton 208/230-1-60 Tecumseh, for example, you can review the CAPY (MBH) column to find compressors in the 28-30 MBH range. You will then note all of the 2.5 Ton Tecumsehs in group J3. You can then get an idea of the compressors availability by reviewing the Preferred column. You will note that S1-01502371002 is one of the preferred compressors of the substitution group and should generally be available. However, you will also note that inventory may still be available for S1-01502665701. Therefore, you may order any number marked YES or YES/LS. If you order any number in group J3, Parts Order Management will fill your order with any of the compressors which are available in stock. If you prefer that a substitute not be made for the specific compressor you are ordering, state on your order do not substitute. Note however, compressors coded N/A or NONLA are no longer available.

MODEL NUMBER CROSS-REFERENCE The second listing sorts the compressor by manufacturers model number in alphanumeric sequence. You may wish to use this listing as the starting point when you are trying to help a customer find a replacement compressor and the only information available is the manufacturers model number. Look through the listing for the manufacturers model number and bill of material number to find a matching number to the one you need. Once you have located a matching number(s) you can easily reference the UPG part number. Check the Preferred column next, if the column indicates YES or YES/LS, order the compressor. If any other indication is given in the Preferred column refer to the Group column to determine the compressor substitution group, then refer to the Substitution Group Listing and follow the procedures outlined above.

UPG PART NUMBER NUMERIC LISTING The third listing sorts the compressor in UPG part number sequence. Use this listing to reference the substitution group number of each compressor or to check on its preferred status. This listing will help guide you to more information about the specific compressor. Look up the UPG part number in this listing, then refer to the appropriate substitution group in the Substitution Group Listing to review the compressors specifications and potential substitute alternatives.

2009 Source 1 Compressor Substitution Guide 246484 (0609)

main listings in this publication to determine a suitable replacement compressor for most

PUBL-5841-0814

No

men

clatu

re

4

Compressor Substitution Guide This publication contains compressor information pertaining to compressors used in Unitary Products Group (UPG) equipment and with cross-reference/substitution application to Unitary equipment throughout the industry. The following instruction will explain how to use the three

requirements. Prior to using the information in this publication, please review the Compressor Specification Column Headings information on page 2 to become familiar with what they represent.

SUBSTITUTION GROUP LISTING This listing sorts the compressor by substitution groups. The substitution groups are sorted by capacity and voltage characteristics and as well as providing other important specifications. To find a 2.5 ton 208/230-1-60 Tecumseh, for example, you can review the CAPY (MBH) column to find compressors in the 28-30 MBH range. You will then note all of the 2.5 Ton Tecumsehs in group J3. You can then get an idea of the compressors availability by reviewing the Preferred column. You will note that S1-01502371002 is one of the preferred compressors of the substitution group and should generally be available. However, you will also note that inventory may still be available for S1-01502665701. Therefore, you may order any number marked YES or YES/LS. If you order any number in group J3, Parts Order Management will fill your order with any of the compressors which are available in stock. If you prefer that a substitute not be made for the specific compressor you are ordering, state on your order do not substitute. Note however, compressors coded N/A or NONLA are no longer available.

MODEL NUMBER CROSS-REFERENCE The second listing sorts th