Embed Size (px)
Citation preview
LIT208 – EN.06.2017
Comprehensive lubrication solutions for vehicle service
ComponentsPart Number Description
343530 AFCS Enterprise Controller – Includes 6 pulse inputs, 6 level inputs, and 6 fluid outputs; Has touch screen LCD for configuration; Provides 1 Ethernet switch to connect to network; Works on 110 or 220 AC power
343531 AFCS Enterprise Ethernet Switch Kit – Kit for the AFCS Enterprise controller; Adds 4 additional Ethernet ports when daisy chaining network controllers; Not to be used to daisy chain more than 10 units together
343537 Enterprise Software for 1 site – USB storage drive that includes all the software to install on server/PC
343539 Combo Unit – Includes solenoid, pulse meter, and 150-micron filter
343408 Combo Unit Install Kit – Includes (2) 90-degree swivel elbows and (1) ½" ID x 2 ft (61 cm) hose
343533-100 Combo Unit Cable – 100 ft (30 m)
343533-250 Combo Unit Cable – 250 ft (76 m)
343533-500 Combo Unit Cable – 500 ft (152 m)
343546 LED Ready Light Assembly – Wires into the combo unit and mounts via a magnet backing
343545 Air Solenoid – ¾" NPT
343542 Air Solenoid – ½" NPT
343543 Air Solenoid – 3/8" NPT
343544 Air Solenoid – ¼" NPT
338315 Solenoid Valve for Petroleum-Based and Aqueous Fluids – ½" NPTF(f ) inlet/outlet, includes manual override and screen
339005 Pulse Meter for Petroleum-Based Fluids – ½" NPTF(f ) inlet/outlet
340080 Pulse Meter for Aqueous Fluids – ½" NPTF(f ) inlet/outlet
343191 Solenoid Valve for Diesel Exhaust Fluid (DEF) – ½" BSPP inlet/outlet
343192 Pulse Meter for Diesel Exhaust Fluid (DEF) – ½" BSPP inlet/outlet
343067 High-Capacity Solenoid Valve – 1" NPTF(f ) inlet/outlet 30 gpm (115 lpm)
343068 High-Capacity Pulse Meter – 1" NPTF(f ) inlet/outlet 30 gpm (115 lpm)
343025 Solenoid Valve Connector – With 3 ft (91 cm) pigtail
339277-1 Pressure Relief Valve – 900 psi (62 bar) max pressure
339277-2 Pressure Relief Valve – 1400 psi (96 bar) max pressure
339276 Pressure Relief Valve Installation Kit – Includes 3 ft (91 cm) connecting hose and (2) tee-reducing branches
317813-2 Medium-Pressure Hose for Oil, Gear Lube & Antifreeze – Needed on some retrofits from reel to combo unit, 2 ft (61 cm)
321206 Low-Level Cutoff for Downtubes – Recommended to prohibit air from getting into line
(Network wire (CAT 5 or CAT 6) not supplied by Alemite)
AFCS EnterpriseControl fluids with your dealer management system
The AFCS Enterprise software and Alemite AFCS fluid inventory control and manage-ment system are designed to accurately track, monitor and dispense fluids in vehicle service applications. This fluid management system utilizes a standard Internet browser to access the software and provides a significant savings by operating up to 50 sites with one server installation.
AFCS Enterprise benefits: � Saves time and money by accurately tracking and accounting for dispensed fluids
� Provides 100 percent interface reliability with management software programs
� Manages up to 50 sites with one server installation
� User interface for dispensing, configuring and tracking is accessible throughout the web browser
� Measures any type of oil, transmission fluid or windshield washer fluid
� Electric bypass measures what is dispensed in bypass mode
5148 North Hanley RoadSt. Louis, MO 63134Toll Free U.S.: 866-4-ALEMITE (866-425-3648)Toll Free Canada: 800-267-8022International: 803-802-0001www.alemite.comAlemite is an SKF Group Brand
Complete Shop SolutionThe Alemite AFCS controller works with your dealer management system to simplify fluid control using a standard Internet browser. This innovative product saves money and improves productivity by accurately tracking and accounting for dispensed fluids.
The AFCS controller and AFCS Enterprise software are part of Alemite’s comprehensive line of solutions for vehicle service facilities. Ranging from handheld lubrication tools, hose reels and meters to fluid handling equipment and fluid management systems, Alemite products increase the efficiency of any shop.
SupportPart Number Description
343534
Technical Service Remote Install Support – Distributor/hardware installer must be on-site to test and confirm configuration.
343535
On-site Installation Support – Two days of installation support on-site by SKF team. Distributor/hardware installer must be on-site in case any hardware installation issues occur.
InterfacesPart Number Description
343589 AssetWorks FA Interface
343590 AssetWorks M5 Interface
343586 CDK Interface with 1 year of service and install
343587 CDK software maintenance (per year)
343591 Procede Interface
343434 TMW Interface
Alemite’s versatile AFCS Enterprise can adapt to any vehicle service location. Based on an Ethernet network, the system enables fast, easy and 100 percent reliable communi-cation, which is essential when the control system interfaces with a dealer manage-ment system. Network connections are easy; simply connect the controller with a Cat 5 or Cat 6 Ethernet cable.
For a stand-alone system, the AFCS Enterprise controller can be wired on its own network; separate from the site’s existing network. This facilitates simple deployment and avoids any security concerns.
For a more advanced setup, each AFCS Enter-prise controller can be connected over an existing network. The controller has a unique MAC address and IP address that allow the unit to route information over an existing network to the PC running the system. The unit comes preconfigured with a static IP address but can be used in dynamic IP mode if running a DHCP server. This method can save on wiring costs and can help a site main-tain complete control of its components.
AFCS Enterprise SoftwareAlemite AFCS Enterprise software is used with AFCS hardware to accurately track, monitor and dispense fluids using your Enter-prise dealer management system. The AFCS fluid management system utilizes a standard Internet browser to access the software and can operate up to 50 sites with one server installation, which can provide significant savings.
AFCS Enterprise software advantages:
� All software comes from one source for simple IT support, backup and reporting
� No need to install software on multiple PCs � Integration of Enterprise Resource Planning (ERP) provides accurate tracking with no missed steps
AFCS Enterprise software features:
� Compatible with AFCS hardware � Software on one server operates up to 50 sites
� Runs as a Windows service so user does not need to be logged into PC for it to work
� Offers four levels of access: system administrator, site administrator, manager and technician
� Provides security protocols across the network
� User interface for dispensing, configuring and tracking is accessible through a web browser
� Can use the site’s SQL database or use SQL Express
� Can be installed on a server for multi-site usage or on a single PC for either single or multi-site usage
The AFCS PC interfaces with fleet and dealer management systems to provide:
� Validation of unique fields that are configurable in system setup, such as work order, line number and equipment number
� Validation of fluid type and quantity for work order or equipment number
� Direct billing to accounting and inventory systems with five different rounding and pricing methods
� Export of more than 15 fields after each transaction
� Available interfaces include CDK Dealer Services, AssetWorks, Procede Software, TMW, Faster and more
Preload and group preload capabilities include:
� Preloading up to five different fields for system to verify before a dispense is accepted
� Preloading fluid types and quantities to work order or equipment number to verify technician’s dispense request
� Initiating one dispense request to multiple hoses with preset quantities from a single field
AFCS Enterprise controller
Service bay computers
Red wireCAT 5 Ethernet wire for the keypad, dispense unit and Master PC
Black wireSolenoid and pulse meter wire to the dis-pense unit
Master PCIn an office, parts counter, or server room
User interface screen
Configuration screen
Track fluids accurately and efficiently with AFCS Enterprise Software and interface capabilities AFCS Server/PC requirements
Server installation requirements
Windows Server 2008 R2 or above
Dedicated or virtualized server
Internet Information Services (IIS) version 7.5 or above
.NET version 4.5.2 or above
.NET version 3.5.x enabled (Windows feature that can be turned on or off)
TCP ports open for our intranet website – 80 or 81 or 82 for the web client; if HTTPS or other secure access technology is used: for SSL – 443/8443/8444, for web – API required
Our web server must only be accessible on your internal intranet. Any connection to the Internet must be secured through a VPN
SQL Server 2008 R2* or above, or SQL Express 2012 or above, or SQL 2012 Standard or above
An SQL instance name of "SKFFLUIDCONTROL" for our use is preferred, but not required
Dispense units communicate via TCP/IP and appear as TCP/IP servers at TCP ports 60000-60019. TCP port 5000 are also used on rare occasions (tank monitoring hardware may eventually use TCP ports 60021-60026)
Client requirements (user PCs, laptops or tablets)Any PC, laptop or tablet that supports one of the browsers listed below is acceptable
Internet Explorer version 10 or 11
Google Chrome
Microsoft Edge
Safari
Report capabilityReports can be run from the central database using these filters
End date Fluid
Site(s) State description
User Status description
Hose HW status code
Tank
PC installation requirements
Windows Professional Edition – Windows 7 or 8.1 or 10
A computer program is available to check the PC for the following requirements and update the PC to these requirements if necessary
Internet Information Services (IIS) version 7.5 or above
.NET version 4.5.2 or above
.NET version 3.5.x enabled (Windows feature that can be turned on or off)
6 to 8 GB real or virtual RAM (multi-site requirement) 4 GB real or virtual RAM (single site)
2 to 4 real or virtual CPUs (multi-site) 2 real or virtual CPUs (single site)
64 bit operating system
TCP ports open for our intranet website – 80 or 81 or 82 for the web client
Our web server must only be accessible on your internal intranet. Any connection to the Internet must be secured through a VPN
An SQL instance name of "SKFFLUIDCONTROL" for our use is preferred, but not required
Dispense units communicate via TCP/IP and appear as TCP/IP servers at TCP ports 60000-60019. TCP port 5000 are also used on rare occasions (tank monitoring hardware may eventually use TCP ports 60021-60026)
System specifications
Dispense points per controller 6 (6 valve outputs and 6 pulse switch inputs)
Tank level sensor inputs per controller 6
Max. controllers per site 50
Max. dispense points per site 300
Max. sites per software installation 50
Max. dispense points per software installation 15,000
Master air solenoid output per system 1 per tank
Alemite’s versatile AFCS Enterprise can adapt to any vehicle service location. Based on an Ethernet network, the system enables fast, easy and 100 percent reliable communi-cation, which is essential when the control system interfaces with a dealer manage-ment system. Network connections are easy; simply connect the controller with a Cat 5 or Cat 6 Ethernet cable.
For a stand-alone system, the AFCS Enterprise controller can be wired on its own network; separate from the site’s existing network. This facilitates simple deployment and avoids any security concerns.
For a more advanced setup, each AFCS Enter-prise controller can be connected over an existing network. The controller has a unique MAC address and IP address that allow the unit to route information over an existing network to the PC running the system. The unit comes preconfigured with a static IP address but can be used in dynamic IP mode if running a DHCP server. This method can save on wiring costs and can help a site main-tain complete control of its components.
AFCS Enterprise SoftwareAlemite AFCS Enterprise software is used with AFCS hardware to accurately track, monitor and dispense fluids using your Enter-prise dealer management system. The AFCS fluid management system utilizes a standard Internet browser to access the software and can operate up to 50 sites with one server installation, which can provide significant savings.
AFCS Enterprise software advantages:
� All software comes from one source for simple IT support, backup and reporting
� No need to install software on multiple PCs � Integration of Enterprise Resource Planning (ERP) provides accurate tracking with no missed steps
AFCS Enterprise software features:
� Compatible with AFCS hardware � Software on one server operates up to 50 sites
� Runs as a Windows service so user does not need to be logged into PC for it to work
� Offers four levels of access: system administrator, site administrator, manager and technician
� Provides security protocols across the network
� User interface for dispensing, configuring and tracking is accessible through a web browser
� Can use the site’s SQL database or use SQL Express
� Can be installed on a server for multi-site usage or on a single PC for either single or multi-site usage
The AFCS PC interfaces with fleet and dealer management systems to provide:
� Validation of unique fields that are configurable in system setup, such as work order, line number and equipment number
� Validation of fluid type and quantity for work order or equipment number
� Direct billing to accounting and inventory systems with five different rounding and pricing methods
� Export of more than 15 fields after each transaction
� Available interfaces include CDK Dealer Services, AssetWorks, Procede Software, TMW, Faster and more
Preload and group preload capabilities include:
� Preloading up to five different fields for system to verify before a dispense is accepted
� Preloading fluid types and quantities to work order or equipment number to verify technician’s dispense request
� Initiating one dispense request to multiple hoses with preset quantities from a single field
AFCS Enterprise controller
Service bay computers
Red wireCAT 5 Ethernet wire for the keypad, dispense unit and Master PC
Black wireSolenoid and pulse meter wire to the dis-pense unit
Master PCIn an office, parts counter, or server room
User interface screen
Configuration screen
Track fluids accurately and efficiently with AFCS Enterprise Software and interface capabilities AFCS Server/PC requirements
Server installation requirements
Windows Server 2008 R2 or above
Dedicated or virtualized server
Internet Information Services (IIS) version 7.5 or above
.NET version 4.5.2 or above
.NET version 3.5.x enabled (Windows feature that can be turned on or off)
TCP ports open for our intranet website – 80 or 81 or 82 for the web client; if HTTPS or other secure access technology is used: for SSL – 443/8443/8444, for web – API required
Our web server must only be accessible on your internal intranet. Any connection to the Internet must be secured through a VPN
SQL Server 2008 R2* or above, or SQL Express 2012 or above, or SQL 2012 Standard or above
An SQL instance name of "SKFFLUIDCONTROL" for our use is preferred, but not required
Dispense units communicate via TCP/IP and appear as TCP/IP servers at TCP ports 60000-60019. TCP port 5000 are also used on rare occasions (tank monitoring hardware may eventually use TCP ports 60021-60026)
Client requirements (user PCs, laptops or tablets)Any PC, laptop or tablet that supports one of the browsers listed below is acceptable
Internet Explorer version 10 or 11
Google Chrome
Microsoft Edge
Safari
Report capabilityReports can be run from the central database using these filters
End date Fluid
Site(s) State description
User Status description
Hose HW status code
Tank
PC installation requirements
Windows Professional Edition – Windows 7 or 8.1 or 10
A computer program is available to check the PC for the following requirements and update the PC to these requirements if necessary
Internet Information Services (IIS) version 7.5 or above
.NET version 4.5.2 or above
.NET version 3.5.x enabled (Windows feature that can be turned on or off)
6 to 8 GB real or virtual RAM (multi-site requirement) 4 GB real or virtual RAM (single site)
2 to 4 real or virtual CPUs (multi-site) 2 real or virtual CPUs (single site)
64 bit operating system
TCP ports open for our intranet website – 80 or 81 or 82 for the web client
Our web server must only be accessible on your internal intranet. Any connection to the Internet must be secured through a VPN
An SQL instance name of "SKFFLUIDCONTROL" for our use is preferred, but not required
Dispense units communicate via TCP/IP and appear as TCP/IP servers at TCP ports 60000-60019. TCP port 5000 are also used on rare occasions (tank monitoring hardware may eventually use TCP ports 60021-60026)
System specifications
Dispense points per controller 6 (6 valve outputs and 6 pulse switch inputs)
Tank level sensor inputs per controller 6
Max. controllers per site 50
Max. dispense points per site 300
Max. sites per software installation 50
Max. dispense points per software installation 15,000
Master air solenoid output per system 1 per tank
Alemite’s versatile AFCS Enterprise can adapt to any vehicle service location. Based on an Ethernet network, the system enables fast, easy and 100 percent reliable communi-cation, which is essential when the control system interfaces with a dealer manage-ment system. Network connections are easy; simply connect the controller with a Cat 5 or Cat 6 Ethernet cable.
For a stand-alone system, the AFCS Enterprise controller can be wired on its own network; separate from the site’s existing network. This facilitates simple deployment and avoids any security concerns.
For a more advanced setup, each AFCS Enter-prise controller can be connected over an existing network. The controller has a unique MAC address and IP address that allow the unit to route information over an existing network to the PC running the system. The unit comes preconfigured with a static IP address but can be used in dynamic IP mode if running a DHCP server. This method can save on wiring costs and can help a site main-tain complete control of its components.
AFCS Enterprise SoftwareAlemite AFCS Enterprise software is used with AFCS hardware to accurately track, monitor and dispense fluids using your Enter-prise dealer management system. The AFCS fluid management system utilizes a standard Internet browser to access the software and can operate up to 50 sites with one server installation, which can provide significant savings.
AFCS Enterprise software advantages:
� All software comes from one source for simple IT support, backup and reporting
� No need to install software on multiple PCs � Integration of Enterprise Resource Planning (ERP) provides accurate tracking with no missed steps
AFCS Enterprise software features:
� Compatible with AFCS hardware � Software on one server operates up to 50 sites
� Runs as a Windows service so user does not need to be logged into PC for it to work
� Offers four levels of access: system administrator, site administrator, manager and technician
� Provides security protocols across the network
� User interface for dispensing, configuring and tracking is accessible through a web browser
� Can use the site’s SQL database or use SQL Express
� Can be installed on a server for multi-site usage or on a single PC for either single or multi-site usage
The AFCS PC interfaces with fleet and dealer management systems to provide:
� Validation of unique fields that are configurable in system setup, such as work order, line number and equipment number
� Validation of fluid type and quantity for work order or equipment number
� Direct billing to accounting and inventory systems with five different rounding and pricing methods
� Export of more than 15 fields after each transaction
� Available interfaces include CDK Dealer Services, AssetWorks, Procede Software, TMW, Faster and more
Preload and group preload capabilities include:
� Preloading up to five different fields for system to verify before a dispense is accepted
� Preloading fluid types and quantities to work order or equipment number to verify technician’s dispense request
� Initiating one dispense request to multiple hoses with preset quantities from a single field
AFCS Enterprise controller
Service bay computers
Red wireCAT 5 Ethernet wire for the keypad, dispense unit and Master PC
Black wireSolenoid and pulse meter wire to the dis-pense unit
Master PCIn an office, parts counter, or server room
User interface screen
Configuration screen
Track fluids accurately and efficiently with AFCS Enterprise Software and interface capabilities AFCS Server/PC requirements
Server installation requirements
Windows Server 2008 R2 or above
Dedicated or virtualized server
Internet Information Services (IIS) version 7.5 or above
.NET version 4.5.2 or above
.NET version 3.5.x enabled (Windows feature that can be turned on or off)
TCP ports open for our intranet website – 80 or 81 or 82 for the web client; if HTTPS or other secure access technology is used: for SSL – 443/8443/8444, for web – API required
Our web server must only be accessible on your internal intranet. Any connection to the Internet must be secured through a VPN
SQL Server 2008 R2* or above, or SQL Express 2012 or above, or SQL 2012 Standard or above
An SQL instance name of "SKFFLUIDCONTROL" for our use is preferred, but not required
Dispense units communicate via TCP/IP and appear as TCP/IP servers at TCP ports 60000-60019. TCP port 5000 are also used on rare occasions (tank monitoring hardware may eventually use TCP ports 60021-60026)
Client requirements (user PCs, laptops or tablets)Any PC, laptop or tablet that supports one of the browsers listed below is acceptable
Internet Explorer version 10 or 11
Google Chrome
Microsoft Edge
Safari
Report capabilityReports can be run from the central database using these filters
End date Fluid
Site(s) State description
User Status description
Hose HW status code
Tank
PC installation requirements
Windows Professional Edition – Windows 7 or 8.1 or 10
A computer program is available to check the PC for the following requirements and update the PC to these requirements if necessary
Internet Information Services (IIS) version 7.5 or above
.NET version 4.5.2 or above
.NET version 3.5.x enabled (Windows feature that can be turned on or off)
6 to 8 GB real or virtual RAM (multi-site requirement) 4 GB real or virtual RAM (single site)
2 to 4 real or virtual CPUs (multi-site) 2 real or virtual CPUs (single site)
64 bit operating system
TCP ports open for our intranet website – 80 or 81 or 82 for the web client
Our web server must only be accessible on your internal intranet. Any connection to the Internet must be secured through a VPN
An SQL instance name of "SKFFLUIDCONTROL" for our use is preferred, but not required
Dispense units communicate via TCP/IP and appear as TCP/IP servers at TCP ports 60000-60019. TCP port 5000 are also used on rare occasions (tank monitoring hardware may eventually use TCP ports 60021-60026)
System specifications
Dispense points per controller 6 (6 valve outputs and 6 pulse switch inputs)
Tank level sensor inputs per controller 6
Max. controllers per site 50
Max. dispense points per site 300
Max. sites per software installation 50
Max. dispense points per software installation 15,000
Master air solenoid output per system 1 per tank
LIT208 – EN.08.2017
Comprehensive lubrication solutions for vehicle service
ComponentsPart Number Description
343530 AFCS Enterprise Controller – Includes 6 pulse inputs, 6 level inputs, and 6 fluid outputs; Has touch screen LCD for configuration; Provides 1 Ethernet switch to connect to network; Works on 110 or 220 AC power
343531 AFCS Enterprise Ethernet Switch Kit – Kit for the AFCS Enterprise controller; Adds 4 additional Ethernet ports when daisy chaining network controllers; Not to be used to daisy chain more than 10 units together
343537 Enterprise Software for 1 site – USB storage drive that includes all the software to install on server/PC
343539 Combo Unit – Includes solenoid, pulse meter, and 150-micron filter
343408 Combo Unit Install Kit – Includes (2) 90-degree swivel elbows and (1) ½" ID x 2 ft (61 cm) hose
343533-100 Combo Unit Cable – 100 ft (30 m)
343533-250 Combo Unit Cable – 250 ft (76 m)
343533-500 Combo Unit Cable – 500 ft (152 m)
343546 LED Ready Light Assembly – Wires into the combo unit and mounts via a magnet backing
343545 Air Solenoid – ¾" NPT
343542 Air Solenoid – ½" NPT
343543 Air Solenoid – 3/8" NPT
343544 Air Solenoid – ¼" NPT
338315 Solenoid Valve for Petroleum-Based and Aqueous Fluids – ½" NPTF(f ) inlet/outlet, includes manual override and screen
339005 Pulse Meter for Petroleum-Based Fluids – ½" NPTF(f ) inlet/outlet
340080 Pulse Meter for Aqueous Fluids – ½" NPTF(f ) inlet/outlet
343191 Solenoid Valve for Diesel Exhaust Fluid (DEF) – ½" BSPP inlet/outlet
343192 Pulse Meter for Diesel Exhaust Fluid (DEF) – ½" BSPP inlet/outlet
343067 High-Capacity Solenoid Valve – 1" NPTF(f ) inlet/outlet 30 gpm (115 lpm)
343068 High-Capacity Pulse Meter – 1" NPTF(f ) inlet/outlet 30 gpm (115 lpm)
343025 Solenoid Valve Connector – With 3 ft (91 cm) pigtail
343540 Tank Monitor – Includes 30 ft (9.1 m) cable, mounts in open ¾" or 2" bung
339277-1 Pressure Relief Valve – 900 psi (62 bar) max pressure
339277-2 Pressure Relief Valve – 1400 psi (96 bar) max pressure
339276 Pressure Relief Valve Installation Kit – Includes 3 ft (91 cm) connecting hose and (2) tee-reducing branches
317813-2 Medium-Pressure Hose for Oil, Gear Lube & Antifreeze – Needed on some retrofits from reel to combo unit, 2 ft (61 cm)
321206 Low-Level Cutoff for Downtubes – Recommended to prohibit air from getting into line
(Network wire (CAT 5 or CAT 6) not supplied by Alemite)
AFCS EnterpriseControl fluids with your dealer management system
The AFCS Enterprise software and Alemite AFCS fluid inventory control and manage-ment system are designed to accurately track, monitor and dispense fluids in vehicle service applications. This fluid management system utilizes a standard Internet browser to access the software and provides a significant savings by operating up to 50 sites with one server installation.
AFCS Enterprise benefits:� Saves time and money by accurately
tracking and accounting for dispensed fluids� Provides 100 percent interface reliability
with management software programs� Manages up to 50 sites with one server
installation� User interface for dispensing, configuring
and tracking is accessible throughout the web browser� Measures any type of oil, transmission
fluid or windshield washer fluid� Electric bypass measures what is
dispensed in bypass mode
5148 North Hanley RoadSt. Louis, MO 63134Toll Free U.S.: 866-4-ALEMITE (866-425-3648)Toll Free Canada: 800-267-8022International: 803-802-0001www.alemite.comAlemite is an SKF Group Brand
Complete Shop SolutionThe Alemite AFCS controller works with your dealer management system to simplify fluid control using a standard Internet browser. This innovative product saves money and improves productivity by accurately tracking and accounting for dispensed fluids.
The AFCS controller and AFCS Enterprise software are part of Alemite’s comprehensive line of solutions for vehicle service facilities. Ranging from handheld lubrication tools, hose reels and meters to fluid handling equipment and fluid management systems, Alemite products increase the efficiency of any shop.
SupportPart Number Description
343534
Technical Service Remote Install Support – Distributor/hardware installer must be on-site to test and confirm configuration.
343535
On-site Installation Support – Two days of installation support on-site by SKF team. Distributor/hardware installer must be on-site in case any hardware installation issues occur.
InterfacesPart Number Description
343589 AssetWorks FA Interface
343590 AssetWorks M5 Interface
343586 CDK Interface with 1 year of service and install
343587 CDK software maintenance (per year)
343591 Procede Interface
343434 TMW Interface
LIT208 – EN.08.2017
Comprehensive lubrication solutions for vehicle service
ComponentsPart Number Description
343530 AFCS Enterprise Controller – Includes 6 pulse inputs, 6 level inputs, and 6 fluid outputs; Has touch screen LCD for configuration; Provides 1 Ethernet switch to connect to network; Works on 110 or 220 AC power
343531 AFCS Enterprise Ethernet Switch Kit – Kit for the AFCS Enterprise controller; Adds 4 additional Ethernet ports when daisy chaining network controllers; Not to be used to daisy chain more than 10 units together
343537 Enterprise Software for 1 site – USB storage drive that includes all the software to install on server/PC
343539 Combo Unit – Includes solenoid, pulse meter, and 150-micron filter
343408 Combo Unit Install Kit – Includes (2) 90-degree swivel elbows and (1) ½" ID x 2 ft (61 cm) hose
343533-100 Combo Unit Cable – 100 ft (30 m)
343533-250 Combo Unit Cable – 250 ft (76 m)
343533-500 Combo Unit Cable – 500 ft (152 m)
343546 LED Ready Light Assembly – Wires into the combo unit and mounts via a magnet backing
343545 Air Solenoid – ¾" NPT
343542 Air Solenoid – ½" NPT
343543 Air Solenoid – 3/8" NPT
343544 Air Solenoid – ¼" NPT
338315 Solenoid Valve for Petroleum-Based and Aqueous Fluids – ½" NPTF(f ) inlet/outlet, includes manual override and screen
339005 Pulse Meter for Petroleum-Based Fluids – ½" NPTF(f ) inlet/outlet
340080 Pulse Meter for Aqueous Fluids – ½" NPTF(f ) inlet/outlet
343191 Solenoid Valve for Diesel Exhaust Fluid (DEF) – ½" BSPP inlet/outlet
343192 Pulse Meter for Diesel Exhaust Fluid (DEF) – ½" BSPP inlet/outlet
343067 High-Capacity Solenoid Valve – 1" NPTF(f ) inlet/outlet 30 gpm (115 lpm)
343068 High-Capacity Pulse Meter – 1" NPTF(f ) inlet/outlet 30 gpm (115 lpm)
343025 Solenoid Valve Connector – With 3 ft (91 cm) pigtail
343540 Tank Monitor – Includes 30 ft (9.1 m) cable, mounts in open ¾" or 2" bung
339277-1 Pressure Relief Valve – 900 psi (62 bar) max pressure
339277-2 Pressure Relief Valve – 1400 psi (96 bar) max pressure
339276 Pressure Relief Valve Installation Kit – Includes 3 ft (91 cm) connecting hose and (2) tee-reducing branches
317813-2 Medium-Pressure Hose for Oil, Gear Lube & Antifreeze – Needed on some retrofits from reel to combo unit, 2 ft (61 cm)
321206 Low-Level Cutoff for Downtubes – Recommended to prohibit air from getting into line
(Network wire (CAT 5 or CAT 6) not supplied by Alemite)
AFCS EnterpriseControl fluids with your dealer management system
The AFCS Enterprise software and Alemite AFCS fluid inventory control and manage-ment system are designed to accurately track, monitor and dispense fluids in vehicle service applications. This fluid management system utilizes a standard Internet browser to access the software and provides a significant savings by operating up to 50 sites with one server installation.
AFCS Enterprise benefits: � Saves time and money by accurately tracking and accounting for dispensed fluids
� Provides 100 percent interface reliability with management software programs
� Manages up to 50 sites with one server installation
� User interface for dispensing, configuring and tracking is accessible throughout the web browser
� Measures any type of oil, transmission fluid or windshield washer fluid
� Electric bypass measures what is dispensed in bypass mode
5148 North Hanley RoadSt. Louis, MO 63134Toll Free U.S.: 866-4-ALEMITE (866-425-3648)Toll Free Canada: 800-267-8022International: 803-802-0001www.alemite.comAlemite is an SKF Group Brand
Complete Shop SolutionThe Alemite AFCS controller works with your dealer management system to simplify fluid control using a standard Internet browser. This innovative product saves money and improves productivity by accurately tracking and accounting for dispensed fluids.
The AFCS controller and AFCS Enterprise software are part of Alemite’s comprehensive line of solutions for vehicle service facilities. Ranging from handheld lubrication tools, hose reels and meters to fluid handling equipment and fluid management systems, Alemite products increase the efficiency of any shop.
SupportPart Number Description
343534
Technical Service Remote Install Support – Distributor/hardware installer must be on-site to test and confirm configuration.
343535
On-site Installation Support – Two days of installation support on-site by SKF team. Distributor/hardware installer must be on-site in case any hardware installation issues occur.
InterfacesPart Number Description
343589 AssetWorks FA Interface
343590 AssetWorks M5 Interface
343586 CDK Interface with 1 year of service and install
343587 CDK software maintenance (per year)
343591 Procede Interface
343434 TMW Interface
![Evaluation of the Minimum Quantity Lubrication in ... quantity lubrication (MQL) machining or near dry machining [9-12]. There are several types of cutting fluids applied during the](https://img.pdfslide.us/doc/110x75/5adc57bb7f8b9a9a768b6aac/evaluation-of-the-minimum-quantity-lubrication-in-quantity-lubrication-mql.jpg)
