4
internationalthermalsystems.com · [email protected] · 414.672.7700 Illustration showing quasi-isotropic laminate lay-up Illustration showing laminate orientation

Composite Curing Out of Autoclave Tutorial...Trapped air pockets Vessel Composite Lay-up gag Tool Duct Work Showing Airflow Vacuum Bag Sealant Tape Laminate Pan Thermocouple V muum

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Composite Curing Out of Autoclave Tutorial...Trapped air pockets Vessel Composite Lay-up gag Tool Duct Work Showing Airflow Vacuum Bag Sealant Tape Laminate Pan Thermocouple V muum

internationalthermalsystems.com · [email protected] · 414.672.7700

Illustration showing quasi-isotropic laminate lay-up

Illustration showing laminate orientation

Page 2: Composite Curing Out of Autoclave Tutorial...Trapped air pockets Vessel Composite Lay-up gag Tool Duct Work Showing Airflow Vacuum Bag Sealant Tape Laminate Pan Thermocouple V muum

internationalthermalsystems.com · [email protected] · 414.672.7700

Typical Autoclave set-up showing tool

Part processing in a composite cure oven

Page 3: Composite Curing Out of Autoclave Tutorial...Trapped air pockets Vessel Composite Lay-up gag Tool Duct Work Showing Airflow Vacuum Bag Sealant Tape Laminate Pan Thermocouple V muum

internationalthermalsystems.com · [email protected] · 414.672.7700

• •

• •

• • • • • • •

• • • • • • •

Page 4: Composite Curing Out of Autoclave Tutorial...Trapped air pockets Vessel Composite Lay-up gag Tool Duct Work Showing Airflow Vacuum Bag Sealant Tape Laminate Pan Thermocouple V muum

internationalthermalsystems.com · [email protected] · 414.672.7700