Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Components for BalersCatalogue 2016/2017
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Index
Type PAAL 1.1–12.4
Track Rollers 1.1–1.6
Bolts for Track Rollers / Bearings / Bushings 2.1–2.5
Sets of Pressure Plate Blades 3.1–3.2
Wear Plates / Scrapers / Guide Profiles / Guide Bars 4.1–4.2
Lateral Guide Profiles / Cover for Track Rollers 5.1–5.2
Sets of Bottom Wear Plates 6.1
Sets of Counter Blades 7.1
Sets of Guide Rails 8.1–8.3
Material Retainer / Tension Screw / Tension Spring / Rubber Bumper / Bolt for Side Wall 9.1
Twisting Hooks 10.1–10.2
Shafts for Twisting Hooks / Bolts for Guide Sprockets / Wire Cutting Blades / Mounts for Blades / Chains / Sprockets 11.1–11.2
Wire Drawing Needles / Mounts for Rollers / Wire Guide Rollers / Wire Guide Bushing / Conveyor Roller / Bumper 12.1–12.4
Filters 12.4
Type BOLLEGRAAF 13.1–13.2
Type BOA 14.1
Type PRESONA 15.1
Order Form 16.1
General Terms & Conditions 17.1
please see our Catalogues with Components for Containers, Compactors, Grabs and IBCs for further Products
Components for CompactorsCatalogue 2016/2017
Components for GrabsCatalogue 2016/2017
Components for IBCsCatalogue 2016/2017
Components for ContainersCatalogue 2016/2017
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 263 Track Roller, complete 65-210-100mm 42CrMo4, hardened, with Bearing and Bushing 743,82160 500 01 Roller-Bearing 90-140-67mm DIN 5412, SL045018-PP 340,55467 263 02 Bushing 65-125/90-103,5mm 9SMn28k 94,00150 700 02 Retaining Ring d=134,8mm WRE 140, 2 needed 5,10150 500 02 Lock Washer d=90mm DIN 5406, MB18 2,94120 910 02 Locknut M90x2mm DIN 981, KM18 17,84
210
100 67
140
90
210
227 67
140
90
467 264
467 263 02 160 500 01 150 500 02 120 910 02
160 500 01 467 263 02 150 500 02 120 910 02
467 263
150 700 02
Item No. Product Dimensions Additional Information Price €467 264 Track Roller, complete 65-210-227mm 42CrMo4, hardened, with Bearings and Bushing 1430,00160 500 01 Roller-Bearing 90-140-67mm DIN 5412, SL045018-PP, 2 needed 340,55467 263 02 Bushing 65-125/90-103,5mm 9SMn28k, 2 needed 94,00150 500 02 Lock Washer d=90mm DIN 5406, MB18, 2 needed 2,94120 910 02 Locknut M90x2mm DIN 981, KM18, 2 needed 17,84
65
1.1
Track Rollers
Trac
k Ro
llers
Typ
e PA
AL
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 267 Track Roller, complete 80-210-66,5mm 42CrMo4, hardened, with Bearing 583,30160 500 04 Roller-Bearing 80-170-58mm DIN 5412, SL-192316 227,35190 200 01 Grease Nipple D=8mm DIN 3405 1,50
210
66,5467 267
5880
190 200 01 160 500 04
170
Item No. Product Dimensions Additional Information Price €467 272 Track Roller, complete 80-200-108mm RSU 80-200, with Roller-Bearing and Spacer Discs 741,86467 272 01 Track Roller 80-200-90mm RSU 80-200, with Roller-Bearing 685,02467 272 02 Spacer Disc 80-170-10mm PE, 2 needed 28,42
200
80
90 10
170
467 272
467 272 01 467 272 02
1.2
Track Rollers
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 261 Track Roller, complete 55-170-61mm 42CrMo4, hardened, without Retaining Compound 467 266 240,00467 261 01 Track Roller 67-170-61mm 42CrMo4 135,70467 261 02 Bushing 55-65-55mm X39CrMo17-1, hardened 55,66230 100 01 Rod Guide Ring 65-70-15mm 3 needed 6,75467 276 Thrust Ring 56-95-2mm 51CrV4 7,45467 275 Thrust Ring 66-95-2mm 51CrV4 7,45150 300 02 Circlip d=55mm DIN 471 1,50
170
61467 261
15 65
467 261 01 467 276 467 275 230 100 01 150 300 02 467 261 02
55 65 70 95
Item No. Product Additional Information Price €467 266 Retaining Compound 50 ml 36,00
Item No. Product Dimensions Additional Information Price €467 262 Track Roller, complete 65-170-61mm 42CrMo4, hardened 184,34467 261 01 Track Roller 67-170-61mm 42CrMo4 135,70230 100 01 Rod Guide Ring 65-70-15mm 3 needed 6,75467 275 Thrust Ring 66-95-2mm 51CrV4, 2 needed 7,45150 300 08 Circlip d=65mm DIN 471 0,90
170
61467 262
15
467 261 01 467 275 467 275 230 100 01 150 300 08
65 70 95
1.3
Trac
k Ro
llers
Typ
e PA
ALTrack Rollers
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 265 Track Roller, complete 65-170-55,5mm 42CrMo4, with Bearing 341,00160 500 02 Roller-Bearing 65-140-48mm DIN 5412, SL-192313 193,25190 200 01 Grease Nipple D=8mm DIN 3405 1,50
170
55,5467 265 48
65
190 200 01 160 500 02
140
Item No. Product Dimensions Additional Information Price €467 241 Track Roller, complete 55-160-52mm 42CrMo4, with Bushing 175,50
70
160 80
50 52467 241
55
Item No. Product Dimensions Additional Information Price €467 260 Track Roller, complete 65-170-66,7mm 42CrMo4, hardened, with Bearing and Radial Shaft Seal 345,74160 500 02 Roller-Bearing 65-140-48mm DIN 5412, SL-192313 193,25150 400 01 Radial Shaft seal 110-140-12mm BA-U6 26,36190 200 01 Grease Nipple D=8mm DIN 3405 1,50
467 260 124866,7
170
140
110
160 500 02 150 400 01190 200 01
65
1.4
Track Rollers
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 268 Track Roller, complete 75-160-59mm 42CrMo4, with Bearing 300,40160 500 05 Roller-Bearing 75-115-54mm DIN 5412, SL04-5015-PP 186,00150 700 01 Retaining Ring d=110,4mm WRE 115, 2 needed 3,00
467 268
160
59 54
75 115
150 700 01 160 500 05
Item No. Product Dimensions Additional Information Price €467 269 Track Roller, complete 55-130-47,2mm 42CrMo4, hardened, with Bushing 162,19467 269 01 Track Roller 67-130-47,2mm 42CrMo4, hardened 64,88467 257 Bushing 55-65-42mm 47,04467 276 Thrust Ring 56-95-2mm 51CrV4 7,45467 275 Thrust Ring 66-95-2mm 51CrV4 7,45230 100 01 Rod Guide Ring 65-70-15mm 6,75150 300 02 Circlip d=55mm DIN 471 1,50
47,2 42
130
15
55 65467 269 01 467 276 230 100 01 467 257 150 300 02
467 269
467 275
Item No. Product Dimensions Additional Information Price €467 271 Track Roller, complete 65-130-47,2mm 42CrMo4, hardened 132,00467 269 01 Track Roller 67-130-47,2mm 42CrMo4, hardened 64,88467 275 Thrust Ring 66-95-2mm 51CrV4 7,45230 100 01 Rod Guide Ring 65-70-15mm 2 needed 6,75150 300 08 Circlip d=65mm DIN 471 0,90
130 65 70
467 269 01 467 275 230 100 01 150 300 08
85
467 271 47,2 15
1.5
Trac
k Ro
llers
Typ
e PA
ALTrack Rollers
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 014 Track Roller, complete 40-110-40mm S355J2, with Bushing, for Wire Thrust 74,80467 014 01 Track Roller 50-110-40mm S355J2 39,10160 600 02 Slide Bushing 45-50-40mm PAP4540P20 5,80160 700 01 Inner Ring 40-45-20mm DIN 620, 2 needed 9,70467 277 Thrust Ring 40,2-60-4,5mm 9SMn28k 7,06150 300 07 Circlip d=40mm 0,30
Item No. Product Dimensions Additional Information Price €467 270 Track Roller, complete 40-120-40mm 42CrMo4, hardened, with Slide Bushing 59,29160 600 01 Slide Bushing 45-50-40mm PAP4540P10 9,60160 700 01 Inner Ring 40-45-20mm DIN 620, 2 needed 9,70
467 270
120
40 4040
160 600 01 160 700 01
4520
50
110
40
50
467 014
4540
467 014 01 160 600 02 467 277160 700 01 150 300 07
40 20
1.6
Track Rollers
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 258 Bolt for Track Rollers, complete M56x2mm S355J2, with Grease Nipples 99,18467 258 01 Locknut M56x2mm 9SMn28k, for Bolt for Track Rollers 467 258 42,15
Item No. Product Dimensions Additional Information Price €467 254 Bolt, complete 55x210mm C45, with Collar, Screw, Washer and Nut 83,30
SW 8
5
M56
x244
467 258 01
Item No. Product Dimensions Additional Information Price €467 273 Bolt for Track Rollers, complete 80x198mm C45, with Locking Plate 467 273 02, for Track Roller 467 272 148,00
80
20
100 5
467 273
198
147
89
M56
x2467 258
75 65
140
210
467 254
5580
2.1
Trac
k Ro
llers
/ Bo
lts
for
Trac
k Ro
llers
Typ
e PA
AL
Bolt for Track Rollers / Locknut
Bolt with Collar
Bolt for Track Rollers with Locking Plate
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 255 Bolt for Track Rollers 40x85mm S355J2 41,65467 251 Bolt for Track Rollers 40x85mm S355J2, with Grease Nipple, for Track Roller 467 014 35,97467 253 Bolt for Track Rollers 45x118mm C45k 34,80467 259 Bolt for Track Rollers 55x85mm S355J2, with Grease Nipple 38,92467 256 Bolt for Track Rollers 55x115mm S355J2, with Grease Nipples 44,00
467 255
85
40
Item No. Product Dimensions Additional Information Price €467 263 03 Bolt for Track Rollers 65x173mm C45k, for Track Roller 467 263, with Grease Nipples, Disc and Screw 467 263 05,
for Central Lubrication System57,33
467 264 04 Bolt for Track Rollers 65x310mm C45k, for Track Roller 467 264, with Grease Nipples, Disc and Screw 467 263 05, for Central Lubrication System
117,40
467 263 05 Screw M16 for Bolt for Track Rollers 467 263 03 /-264 04 6,80
467 263 03
467 264 04
467 253
118
45467 263 05
12,5
M16
2050
115
467 256
40
85
467 251
45
85
467 259
6060
55
55 55
31065
17365
2.2
Bolts for Track Rollers
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 269 07 Bolt for Track Rollers 55x105mm S355JR, with Grease Nipple, for Track Roller 467 269 59,20467 261 03 Bolt for Track Rollers 55x119mm S355J2, with Grease Nipples, for Track Roller 467 261 75,07467 269 02 Bolt for Track Rollers 65x105mm S355J2, with Grease Nipples, for Track Roller 467 271 61,25467 261 05 Bolt for Track Rollers 65x119mm S355J2, with Grease Nipples, for Track Roller 467 262 73,00
Item No. Product Dimensions Additional Information Price €467 252 Bolt for Track Rollers 65x48mm S355J2, for Track Rollers 467 260 86,24467 245 Bolt with Plate for Track Roller 65x48mm S355J2, for Track Roller 467 265 387,00467 249 Bolt with Plate for Track Roller 58,3x80mm S355J2, for Track Roller 467 267 407,19
467 252
65
94
48
180 126,5
467 245
180 65
48
210
210
89
467 249
80
58,3
166
467 261 05
119
65
100
119
55
467 261 03
100
105
65
467 269 02
100
467 269 07
55
105100
2.3
Bolt
s fo
r Tr
ack
Rolle
rs T
ype
PAA
LBolts for Track Rollers
Bolts with Plates for Track Rollers
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €160 310 01 Needle-Axial-Ball-Bearing 30-48,2-30mm NKX-30-Z 27,45160 300 07 Needle-Bearing 6-16-16mm DIN 617, NKI 6/16-TV 8,90160 300 01 Needle-Bearing 10-22-13mm DIN 617, NA 4900 8,60160 300 02 Needle-Bearing 10-22-20mm DIN 617, NKI10/20 7,95160 300 04 Needle-Bearing 30-40-20mm DIN 617, NK 30/20 7,75160 300 05 Needle-Bearing 30-40-30mm DIN 617, NK 30/30-TV 8,60
Item No. Product Dimensions Additional Information Price €160 100 04 Ball-Bearing 17-40-12mm DIN 625, 6203-2RS 7,45160 100 07 Ball-Bearing 30-55-13mm DIN 625, 6006-2RS 8,45160 100 05 Ball-Bearing 30-62-16mm DIN 625, 6206-2RS 7,45160 100 03 Ball-Bearing 35-62-14mm DIN 625, 6007-2RS 8,35
30 42 48,2
30
160 310 01 160 300 05
30
4030
55
160 100 07
13
30
160 100 03
14
35 62
14
35 62
160 100 05
160 100 04
12
17 40
20
30 40
160 300 04
160 300 01
2210
13
160 300 02
2210
20
166
16
160 300 07
2.4
Needle-Bearings
Ball-Bearings
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €160 700 01 Inner Ring 40-45-20mm DIN 620 9,70160 600 01 Slide Bushing 45-50-40mm PAP4540P10 9,60160 600 02 Slide Bushing 45-50-40mm PAP4540P20 5,80230 100 01 Rod Guide Ring 65-70-15mm 6,75467 257 Bushing 55-65-42mm 47,04
Item No. Product Dimensions Additional Information Price €160 500 04 Roller-Bearing 80-170-58mm DIN 5412, SL-192316 227,35160 500 01 Roller-Bearing 90-140-67mm DIN 5412, SL045018-PP 340,55160 500 02 Roller-Bearing 65-140-48mm DIN 5412, SL-192313 193,25160 500 05 Roller-Bearing 75-115-54mm DIN 5412, SL04-5015-PP 186,00
40 45
20
160 700 01
5045
40
160 600 01
90 140
160 500 01
67
160 500 0480 17
0
58
65 140
160 500 02
48
230 100 01
7065
15
160 500 05
54
75 115
467 257
42
55 65
Item No. Product Dimensions Additional Information Price €467 277 Thrust Ring 40,2-60-4,5mm 9SMn28k 7,06467 278 Thrust Ring 55-80-2mm 51CrV4 7,06467 279 Thrust Ring 65-85-2mm 51CrV4 7,06467 274 Thrust Ring 65-85-3,5mm 51CrV4 4,02467 275 Thrust Ring 66-95-2mm 51CrV4 7,45467 276 Thrust Ring 56-95-2mm 51CrV4 7,45
d D
467 277 / -278 / -279467 274 / -275 / -276
t
5045
40
160 600 02
2.5
Bushings / Rings
Roller-Bearings
Bear
ings
/ Bu
shin
gs /
Ring
s Ty
pe P
AA
L
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 169 Set of Pressure Plate Blades 60x30mm X155CrVMo 12-1, hardened, 2 parts (left/right), with Screw Set 580,75467 157 Set of Pressure Plate Blades 60x15mm X155CrVMo 12-1, hardened, 5 parts, with Screw Set 568,00467 158 Set of Pressure Plate Blades 60x30mm X155CrVMo 12-1, hardened, 6 parts, with Screw Set 862,40467 159 Set of Pressure Plate Blades 60x30mm X155CrVMo 12-1, hardened, 5 parts, with Screw Set 862,40467 150 Set of Pressure Plate Blades 60x30mm X155CrVMo 12-1, hardened, 5 parts, with Screw Set 698,25467 160 Set of Pressure Plate Blades 60x30mm X155CrVMo 12-1, hardened, 6 parts, with Screw Set 931,00467 166 Set of Pressure Plate Blades 75x30mm X155CrVMo 12-1, hardened, 5 parts, with Screw Set 1054,85467 163 Set of Pressure Plate Blades 60x20mm X155CrVMo 12-1, hardened, 5 parts, with Screw Set 766,85
10860
30
280 280
265 108
160 226 265 226 160
7530
467 159
130 226 265 226 130
6030
467 150
467 166
130 226 265 226 130
6020
467 163
140 186 186 186 186 140
6030
467 160
147 206 226 206 147
6015
467 157
6030
110 186 186 186 186 110
467 158
6030
548 548
467 169
10x
8x
6x
10x
8x
8x
12x
10x
3.1
Sets of Pressure Plate Blades
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 161 Set of Pressure Plate Blades 60x30mm X155CrVMo 12-1, hardened, 5 parts, with Screw Set 738,70467 165 Set of Spacing Blocks 60x30mm S235JR, 3 parts, with Screw Set, for 467 161 89,65467 162 Set of Pressure Plate Blades 60x30mm X155CrVMo 12-1, hardened, 6 parts, with Screw Set 1204,00467 164 Set of Pressure Plate Blades 76,5x30mm X155CrVMo 12-1, hardened, 6 parts, with Screw Set 906,50467 168 Set of Pressure Plate Blades 60x30mm X155CrVMo 12-1, hardened, 5 parts, with Screw Set 761,95467 153 Set of Blades 60x15mm X155CrVMo 12-1, hardened, 2 parts, with Screw Set 280,30467 152 Set of Blades 60x15mm X155CrVMo 12-1, hardened, 2 parts, with Screw Set 446,90
108
280
265
280
108
6030
467 161
111
250
185
250
185
6030
142,4
467 162
110 186 186 186 186 110
76,5
30
467 164
265160 160226
6030
226
467 168
226 265 226
6030
467 165
3060
344
467 153
63110110
344
63 110 110
15
495
63185185
467 152
495
63 185 185
153060
6x
6x
10x
10x
11x
6x
8x
3.2
Sets of Pressure Plate Blades
Sets
of P
ress
ure
Plat
e Bl
ades
Typ
e PA
AL
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 312 Scraper, complete 105x1000x150mm with 2 Scrapers 467 312 02, Eyebolts and Screws 282,50467 312 02 Scraper 105x500x100mm PE, for Scraper, complete 467 312 162,19467 318 Scraper, complete 120x1000x25mm with Scraper 467 312 04, Weld-on Latches and Screw Set, separate parts 193,55467 318 04 Scraper 120x1000x10mm PE, for Scraper, complete 467 318 32,00467 060 Scraper 505x15x150mm PE, with Screws and Nuts 21,17
120
25
1000
467 318
467 318 04
100
105
1000
500
500
467 312
467 312 02
467 312 02
150
105
500
100
467 312 02
t=105050 t=10
t=1050
145205
245467 305
x2
x2
x1
Item No. Product Dimensions Additional Information Price €467 316 Lower Wear Plate 1095x350x15mm Hardox 450 205,80467 317 Lower Wear Plate 1076x320x15mm Hardox 450 205,80467 303 Wear Plate 395x630x15mm Hardox 450, with Screws and Nuts 206,70467 304 Wear Plate 405x585x15mm Hardox 450, with Screws and Nuts 201,78
t=151000
4040
40
467 313
40
t=10
t=8
t=6
Item No. Product Dimensions Additional Information Price €467 305 Set of Lower Wear Plates 50x145/205/245x10mm Hardox 450, 5 parts 52,92467 313 Set of Lower Wear Plates 40x1000x6/8/10/15mm Hardox 450, 4 parts, for Pressure Plate 112,48467 309 Lateral Wear Strip 50x750x10mm S235JR 78,40
395
630
t=15
1076
t=15
320
467 317
280
3075
1095
350
t=15467 316
280
3075
750467 309
10
20
50
1515
0
505467 060
6x
6x
1000
120
10
467 318 04
6x
6x6x
6x
6x6x
405
585
t=15
467 304
467 303
4.1
Wear Plates
Scrapers
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 061 Rear Guide Block 50x70x280mm PE 13,62467 315 Lateral Guide Profile 70x50x150mm PE, with Screws 18,33467 314 Guide Profile 85x228x139mm PE 67,62467 311 Guide Profile 85x310x190mm PE 67,62
85
139228467 314
70
280
50
467 061
85
190310
467 311
Item No. Product Dimensions Additional Information Price €467 211 Guide Bar 400x40x40mm MS58, Bore M20, with Screws 127,90467 201 Guide Bar 630x40x40mm MS58, Bore M14, with Screws 172,00467 203 Guide Bar 835x40x40mm S235JR, Bore 6xM20/2xM24, with Screws and Lock Washers 82,22
150
5070
467 315
150
190
6x
8x
8x
4x
4x
4.2
Item No. Product Dimensions Additional Information Price €467 202 03 Weld-on Bracket 610x40x40mm left, S235JR, Bores 18/25mm 75,65467 202 02 Weld-on Bracket 610x40x40mm right, S235JR, Bores 18/25mm 75,65467 202 Guide Bar 650x40x40mm MS58, Bore M16, with Screws, for 467 202 03 /-02 174,00
4040
400467 211
4040
630467 201
4040
835467 203
4040
650467 202
4040
610467 202 02
4040
610467 202 03
Wea
r Pl
ates
/ Sc
rape
rs /
Gui
de P
rofi
les
/ Gui
de B
ars
Type
PA
AL
Guide Bars
Guide Profiles
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 341 Lateral Guide Profile 250x120x45mm PE, with Screws and Nuts 26,30467 342 Lateral Guide Profile 310x200x65mm PE, with Screws and Nuts 72,05467 343 Lateral Guide Profile 400x120x85mm PE, with Screws and Nuts 64,10467 344 Lateral Guide Profile 450x175x50mm PE, with Screws and Nuts 73,00467 346 Lateral Guide Profile 550x120x75mm PE, with Screws and Nuts 82,35467 347 Lateral Guide Profile 550x120x85mm PE, with Screws and Nuts 74,00467 345 Lateral Guide Profile 562x80x55mm PE, with Screws and Nuts 63,70467 348 Lateral Guide Profile 620x80x45mm PE, with Screws and Nuts 210,70467 349 Lateral Guide Profile 645x90x50mm PE, with Screws and Nuts 196,00467 350 Lateral Guide Profile 700x120x40mm PE, with Screws and Nuts 48,05
40
700
120
467 350
5x5x
85
550
120
467 347
4x4x
75
550
120
467 346
4x4x
55
562
80
467 345
4x4x
450 50
175
467 344
4x4x
200
310 65467 342
4x4x
5.1
467 341
2x2x
120
45250
50645
90
467 349
6x6x
5090
45
620
80
467 348
6x6x
4580
400467 343
3x3x
120
85
3x
Lateral Guide Profiles
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 357 Lateral Guide Profile t=50mm PE, 14 parts, with Screw Set 836,45
Item No. Product Dimensions Additional Information Price €467 356 Cover for Track Rollers 45x150x775mm PE, 2 parts right/left, with Screws and Nuts 176,90
45
1100
80
467 353
40
515
40
467 355
45
775
150
467 356
467 062
85015050
120
40
150 150 150 150
50
1600
85
467 354
467 357
216
190
149
160
1419010090 9010090141
x1 x2x1 x1x3 x1 x1 x3 x1
36 72 62 113 160 367262113
32x
Item No. Product Dimensions Additional Information Price €467 355 Lateral Guide Profile 40x40x515mm MS58, with Screws, Nuts and Lock Washers 165,15467 351 Lateral Guide Profile 700x70x50mm PE, with Screws and Nuts 79,30467 062 Lateral Guide Profile 850x120x40mm PE, with Screws and Nuts 56,75467 353 Lateral Guide Profile 1100x80x45mm PE, with Screws and Nuts 171,00467 354 Lateral Guide Profile 1600x85x50mm PE, 2 parts right/left, with Screws and Nuts 220,50
4x4x4x
50
700
70
467 351
5x5x
6x6x
5x5x
14x14x
5.2
5085
Lateral Guide Profiles
Cover for Track Rollers
Late
ral G
uide
Pro
file
s / C
over
for
Trac
k Ro
llers
Typ
e PA
AL
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product LxB A C D E Additional Information Price €467 281 Set of Bottom Wear Plates 2475x1085mm 90mm 230mm 180mm 85mm HARDOX 450, with 36x Screws Set 2189,00467 282 Set of Bottom Wear Plates 2685x1085mm 90mm 230mm 180mm 85mm HARDOX 450, with 36x Screws Set 2240,00467 284 Set of Bottom Wear Plates 2815x1085mm 105mm 220mm 165mm 105mm HARDOX 450, with 36x Screws Set 2367,00467 285 Set of Bottom Wear Plates 2815x1085mm 90mm 230mm 180mm 85mm HARDOX 450, with 36x Screws Set 2366,50467 286 Set of Bottom Wear Plates 3065x1085mm 105mm 220mm 165mm 105mm HARDOX 450, with 42x Screws Set 2470,00467 288 Set of Bottom Wear Plates 3065x1085mm 90mm 230mm 180mm 85mm HARDOX 450, with 42x Screws Set 2470,00467 290 Set of Bottom Wear Plates 3255x1085mm 105mm 220mm 165mm 105mm HARDOX 450, with 42x Screws Set 2470,00467 293 Set of Bottom Wear Plates 3255x1085mm 90mm 230mm 180mm 85mm HARDOX 450, with 42x Screws Set 2470,00467 281 04 Groove Plate 120x60mm HARDOX 450, t=15mm 36,26
Item No. Product LxB A C D E Additional Information Price €467 287 Set of Bottom Wear Plates 3065x1085mm 90mm 190mm 190mm 145mm HARDOX 450, with 42x Screws Set 2470,00467 291 Set of Bottom Wear Plates 3255x1085mm 105mm 220mm 190mm 55mm HARDOX 450, with 42x Screws Set 2470,00467 292 Set of Bottom Wear Plates 3255x1085mm 90mm 190mm 190mm 145mm HARDOX 450, with 42x Screws Set 2470,00467 281 04 Groove Plate 120x60mm HARDOX 450, t=15mm 36,26
Item No. Product LxB A C D Additional Information Price €467 283 Set of Bottom Wear Plates 2370x745mm 67mm 195mm 221mm HARDOX 450, Type LIKON 1764,54
42x
42x42x
36/42x
36/42x36/42x
6.1
4x
5x
467 281 /-282 /-284 /-285 /-286 /-288 /-290 /-293
A
C
C
A
D
D
E1085
L
B
L
467 287 /-291 /-292
A
C
C
A
D
D
E
B
L
467 283
A
C
C
A
D
Sets of Bottom Wear Plates for 4-fold Lashing
Sets of Bottom Wear Plates for 5-fold Lashing
Set of Bottom Wear Plates
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 153 Set of Blades t=15mm X155CrVMo 12-1, 2 parts, with Screw Set 280,30467 152 Set of Blades t=15mm X155CrVMo 12-1, 2 parts, with Screw Set 446,90
467 156
t=0,5/1505,8
88
467 154 05 /-07
305
98
467 154 06 /-08
Item No. Product Dimensions Additional Information Price €467 155 Set of Counter Blades t=30mm X155CrVMo 12-1, 4 parts, with Screw Set 1259,30467 156 Set of Counter Blades t=15mm X155CrVMo 12-1, 4 parts, with Screw Set 636,00467 151 Set of Counter Blades t=30mm X155CrVMo 12-1, 2 parts, with Screw Set 971,70
Item No. Product Dimensions Additional Information Price €467 154 Set of Counter Blades “M“ t=30mm X155CrVMo 12-1, 4 parts, with Screw Set 1370,05467 154 05 Shim t=0,5mm S355J2, for Counter Blade “M“ 467 154 8,00467 154 06 Shim t=0,5mm S355J2, for Counter Blade “M“ 467 154 7,80467 154 07 Shim t=1mm S355J2, for Counter Blade “M“ 467 154 8,20467 154 08 Shim t=1mm S355J2, for Counter Blade “M“ 467 154 7,40
t=0,5/1
272
20515
30
60
344
467 15363
110110
495
63
185185
467 15215
60
30
15
6x 6x
8x
1103
345
467 155
30
16x
467 151
978
144
30
12x
120°
390,
9
1095
467 154
30
16x
7.1
Sets of Counter Blades
Sets
of B
otto
m W
ear
Plat
es /
Sets
of C
ount
er B
lade
s Ty
pe P
AA
L
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 204 Set of Guide Rails 30x15x2165mm 42CrMo4, divided, 2 parts, with Screws and Nuts, for Wire Thrust 232,30467 205 Set of Guide Rails 50x15x600mm 42CrMo4, 2 parts, with Screws and Nuts 95,00467 206 Set of Guide Rails 50x15x1645mm 42CrMo4, 2 parts, with Screws and Nuts 266,00467 207 Set of Guide Rails 50x15x2100mm 42CrMo4, 2 parts, with Screws 257,75467 208 Set of Guide Rails 60x15x1985mm 42CrMo4, 2 parts (left/right), with Screws and Nuts 238,15467 209 Set of Guide Rails 60x30x910mm 42CrMo4, 2 parts (left/right), with Screws and Nuts 349,70467 210 Set of Guide Rails 60x30x1110mm 42CrMo4, 2 parts (left/right), with Screws and Nuts 383,60
600
5015
467 205
164550
15
467 206
2100
5015
467 207
1985
6015
35
467 208
910
6030
35
467 209
1110
6030
35
467 210
2165
3015
467 204
1082,5 1082,5
10x10x
16x
4x4x
14x14x
16x16x
8x8x
10x10x
8.1
Sets of Guide Rails
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 223 Set of Guide Rails 60x30x1250mm 42CrMo4, 2 parts (left/right), with Screws and Nuts 403,55467 212 Set of Guide Rails 60x30x1415mm 42CrMo4, 2 parts (left/right), with Screws and Nuts 423,00467 213 Set of Guide Rails 60x30x1500mm 42CrMo4, 2 parts, with Screws and Nuts 440,40467 214 Set of Guide Rails 60x30x1860mm 42CrMo4, 2 parts, with Screws and Nuts 467,45467 215 Set of Guide Rails 40x15x1025mm 42CrMo4, 2 parts, with Screws 171,50467 216 Set of Guide Rails 40x15x1150mm 42CrMo4, 2 parts, with Screws 167,60467 250 Set of Guide Rails 40x15x1590mm 42CrMo4, 2 parts, with Screws 255,80
1250
6030
467 223
1500
6030
25
467 213
1860
6030
467 214
1025
4015
467 215
1150
4015
467 216
1590
4015
467 250
1415
6030
467 212
10x10x
8x8x
10x10x
12x12x
8x
10x
14x
8.2
Sets of Guide Rails
Sets
of G
uide
Rai
ls T
ype
PAA
L
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
825
4040
15
467 217
Item No. Product Dimensions Additional Information Price €467 217 Set of Guide Rails 40x40x825mm 42CrMo4, 2 parts, with Screws and Nuts 187,80467 218 Set of Guide Rails 40x40x978mm 42CrMo4, 2 parts (left/right), with Screws and Nuts 202,90467 219 Set of Guide Rails 40x40x1080mm 42CrMo4, 2 parts (left/right), with Screws and Nuts 318,50467 220 Set of Guide Rails 40x40x1150mm 42CrMo4, 2 parts (left/right), with Screws and Nuts 246,00467 221 Set of Guide Rails 40x40x1396mm 42CrMo4, 2 parts (left/right), with Screws and Nuts 267,55467 222 Set of Guide Rails 40x40x1590mm 42CrMo4, 2 parts, with Screws and Nuts 326,35
1590
4040
15
1396
4040
15
1150
4040
15
1080
4040
15
978
4040
15
467 218
467 219
467 221
467 220
467 222
8x8x
8x8x
10x10x
10x10x
12x12x
14x14x
8.3
Sets of Guide Rails
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 321 Tension Screw M16x90mm with Nut M16 13,52467 322 Tension Spring 149x29mm Wire D=4mm 3,82
Item No. Product Dimensions Additional Information Price €467 323 Bolt for Side Wall 40x500mm C45k 28,03467 324 Collar 40-63-18mm S355J2 12,64467 325 Collar 40,1-65-20mm S355J2, with Bore M8 15,29
Item No. Product Dimensions Additional Information Price €467 200 Rubber Bumper 58x40mm Rubber, with Nut and Spring Washer 4,31
50040
467 323
1863
40
467 324
65
40,1
20
M8467 325
467 322
149 4
29
181,
3
415,6
41467 319
35
Item No. Product Dimensions Additional Information Price €467 319 Material Retainer 181,3x415,6x35mm S355J2, left 238,17467 320 Material Retainer 181,3x415,6x35mm S355J2, right 238,17
467 200
30M10
40
5826,5 32,5
40
5
90
20 M16
467 321
9.1
Tension Screw / Tension Spring
Bolt for Side Wall / Collar
Rubber Bumper
Material Retainer
Sets
of G
uide
Rai
ls /
Mat
eria
l Ret
aine
r / T
ensi
on S
crew
/ Te
nsio
n Sp
ring
/ Ru
bber
Bum
per
/ Bol
t fo
r Si
de W
all T
ype
PAA
L
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 030 Twisting Hook H=80mm left, Hook HARDOX 500, cranked, primed 74,00467 031 Twisting Hook H=80mm right, Hook HARDOX 500, cranked, primed 74,00467 020 Twisting Hook H=116mm left, Hook HARDOX 500, primed 76,00467 021 Twisting Hook H=116mm right, Hook HARDOX 500, primed 76,00467 020 3 Twisting Hook H=116mm left, Hook HARDOX 500, cranked, primed 78,00467 021 3 Twisting Hook H=116mm right, Hook HARDOX 500, cranked, primed 78,00467 054 Twisting Hook H=116mm left, Hook HARDOX 500, small Hook, primed 76,00467 055 Twisting Hook H=116mm right, Hook HARDOX 500, small Hook, primed 76,00467 022 Twisting Hook H=116mm left, Hook HARDOX 500, cranked, small Hook, primed 76,00467 023 Twisting Hook H=116mm right, Hook HARDOX 500, cranked, small Hook, primed 76,00467 017 Twisting Hook H=122mm left, Hook HARDOX 500, primed, with Screws & Lock Washers 78,00467 018 Twisting Hook H=122mm right, Hook HARDOX 500, primed, with Screws & Lock Washers 78,00467 035 Twisting Hook H=155mm left, Hook HARDOX 500, primed, with Screws & Lock Washers 78,00467 036 Twisting Hook H=155mm right, Hook HARDOX 500, primed, with Screws & Lock Washers 78,00467 010 Twisting Hook H=215mm left, with Wire Cutting Blade 467 009, Hook HARDOX 500, primed 124,00467 011 Twisting Hook H=215mm right, with Wire Cutting Blade 467 009, Hook HARDOX 500, primed 124,00467 010 2 Twisting Hook H=218mm left, with Wire Cutting Blade 467 009, Hook HARDOX 500, primed, with Screws & Lock Washers 124,00467 011 2 Twisting Hook H=218mm right, with Wire Cutting Blade 467 009, Hook HARDOX 500, primed, with Screws & Lock Washers 124,00467 015 Twisting Hook H=215mm left, Hook HARDOX 500, primed, with Screws & Lock Washers 82,00467 016 Twisting Hook H=215mm right, Hook HARDOX 500, primed, with Screws & Lock Washers 82,00
Item No. Product Dimensions Additional Information Price €467 089 Twisting Hook H=80mm left, Hook HARDOX 500, primed 74,00467 090 Twisting Hook H=80mm right, Hook HARDOX 500, primed 74,00467 082 Twisting Hook H=116mm left, Hook HARDOX 500, primed 76,00467 083 Twisting Hook H=116mm right, Hook HARDOX 500, primed 76,00467 084 Twisting Hook H=116mm left, Hook HARDOX 500, cranked, primed 76,00467 085 Twisting Hook H=116mm right, Hook HARDOX 500, cranked, primed 76,00467 080 Twisting Hook H=215mm left, with Wire Cutting Blade 467 009, Hook HARDOX 500, primed 124,00467 081 Twisting Hook H=215mm right, with Wire Cutting Blade 467 009, Hook HARDOX 500, primed 124,00
Twisting Hooks - Standard Version
10.1
467 031 /-090
80
467 023 /-085
116
467 055
116
467 021 3
116
467 021 /-083
116
467 011 /-081
215
467 018
122
4x4x
467 036
155
4x4x
467 016
215
4x4x
218
467 011 2
4x4x
Twisting Hooks for Wire Diameter 2,2–3,2mm
Twisting Hooks for Wire Diameter 3,3–4mm
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 028 Twisting Hook H=80mm left, Hook HARDOX 500, galvanized 71,55467 029 Twisting Hook H=80mm right, Hook HARDOX 500, galvanized 71,55467 030 1 Twisting Hook H=80mm left, Hook HARDOX 500, cranked, galvanized 80,25467 031 1 Twisting Hook H=80mm right, Hook HARDOX 500, cranked, galvanized 80,25467 037 Twisting Hook H=80mm left, Hook HARDOX 500, cranked, small Hook, galvanized 78,30467 038 Twisting Hook H=80mm right, Hook HARDOX 500, cranked, small Hook, galvanized 78,30467 020 1 Twisting Hook H=117mm left, Hook HARDOX 500, galvanized 80,25467 021 1 Twisting Hook H=117mm right, Hook HARDOX 500, galvanized 80,25467 054 1 Twisting Hook H=117mm left, Hook HARDOX 500, small Hook, galvanized 80,25467 055 1 Twisting Hook H=117mm right, Hook HARDOX 500, small Hook, galvanized 80,25467 025 1 Twisting Hook H=117mm left, with Wire Cutting Blade 467 009, Hook HARDOX 500, galvanized 138,70467 026 1 Twisting Hook H=117mm right, with Wire Cutting Blade 467 009, Hook HARDOX 500, galvanized 138,70467 010 1 Twisting Hook H=215mm left, with Wire Cutting Blade 467 009, Hook HARDOX 500, galvanized 129,10467 011 1 Twisting Hook H=215mm right, with Wire Cutting Blade 467 009, Hook HARDOX 500, galvanized 129,10467 015 1 Twisting Hook H=215mm left, Hook HARDOX 500, galvanized, with Screws & Lock Washers 86,95467 016 1 Twisting Hook H=215mm right, Hook HARDOX 500, galvanized, with Screws & Lock Washers 86,95
Twisting Hooks - New Version
467 029
80
467 021 1
117
467 055 1
117
467 016 1
215
467 011 1
215
467 031 1
80 80
467 038
10.2
467 026 1
117
4x4x
Advantages in Comparison with the standard Version:
- Wire is guided completely in HARDOX 500 - wear resistant - for all Wire Diameters 2,2–4mm - galvanized
Twis
ting
Hoo
ks T
ype
PAA
L
Twisting Hooks for Wire Diameter 2,2–4mm
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 118 Shaft for Twisting Hook 30/60x147mm 42CrMo4, with Locknut, Lock Washer, Parallel Key and Screws 133,65467 119 Shaft for Twisting Hook 30/70x161mm 42CrMo4, with Locknut, Lock Washer, Parallel Key and Screws 146,80467 120 Shaft for Twisting Hook 35/68x171mm 42CrMo4, with Locknut, Lock Washer, Parallel Key, Pins and Screw 89,90467 121 Shaft for Twisting Hook 35/70x181,2mm 42CrMo4, with Locknut, Lock Washer, Parallel Key, Pins and Screw 120,39
Item No. Product Dimensions Additional Information Price €467 024 Bolt for Guide Sprocket 50x76,5mm with Bearings, Screws and Washer 68,10467 013 Bolt for Guide Sprocket 50/68x88,5mm with Bearings, Screws and Washer 83,00
Item No. Product Dimensions Additional Information Price €150 500 01 Lock Washer d=30mm MB06, t=1,25mm, for Shaft for Twisting Hook 1,08120 910 03 Locknut M30x1,5mm KM06, t=16mm, for Shafts for Twisting Hooks 6,08140 400 01 Parallel Key 8x7x40mm DIN6885, for Shafts for Twisting Hooks 467 118 /-121 0,39467 118 02 Parallel Key 8x7x29mm for Shaft for Twisting Hook 467 118 4,80
50
76,5
68 50
88,5467 024 467 013
150 500 01
30
120 910 03
M30
x1,5
140 400 01
7
8
40
7
8
29
467 118 02
467 120
68
171
M30
x1,5
3570
181,2
35M
30x1
,5
467 121
Item No. Product Dimensions Additional Information Price €160 310 01 Needle-Axial-Ball-Bearing 30-48,2-30mm NKX-30-Z 27,45160 100 07 Ball-Bearing 30-55-13mm DIN 625, 6006-2RS 8,45160 100 05 Ball-Bearing 30-62-16mm DIN 625, 6206-2RS 7,45160 100 03 Ball-Bearing 35-62-14mm DIN 625, 6007-2RS 8,35
70161
M30
x1,5
467 11930
60
147
M30
x1,5
467 118
30
11.1
Shafts for Twisting Hooks
Bolts for Guide Sprockets
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 003 Wire Cutting Blade 50x15x16,5mm X45NiCrMo4, hardened 13,65467 009 Wire Cutting Blade 40x12x15mm X45NiCrMo4, hardened 13,95467 122 Mount for Blades 50x130,5mm left, S355J2, with Wire Cutting Blade 467 009, Clamp Bushing and Screws 97,50467 124 Mount for Blades 50x130,5mm right, S355J2, with Wire Cutting Blade 467 009, Clamp Bushing and Screws 97,50467 123 Clamp Bushing 38-48-30mm Type BIKON 1016 25,80467 125 Mount for Blades 50x200mm S355J2 , with Wire Cutting Blade 467 009, for Welding 37,75
Item No. Product Dimensions Additional Information Price €467 375 Engine Sprocket 35-109-40mm 12 Teeth, Bore with Nut, with Spacer 18,40467 376 Engine Sprocket 40-109-40mm 12 Teeth, Bore with Nut, with Spacer 18,40467 377 Sprocket for Twisting Hook 30-109-40mm 12 Teeth, Bore with Groove, with Spacer Disc 18,40467 378 Guide Sprocket 40-109-40mm 12 Teeth 18,40467 379 Guide Sprocket 40-108-30mm 12 Teeth 18,40
467 371
467 373 467 374
467 375 467 376 467 377 467 378 467 379
35 40 30 40 40
467 372
75,8 871
40 40 40 40 30
M1648
30
467 123
Item No. Product Dimensions Additional Information Price €/Meter467 371 Duplex-Chain 1“x17mm EC-16-D-16B-2 38,25467 373 Chain 1“x17mm EC-16-M-16B-1 18,52
Item No. Product Dimensions Additional Information Price €467 372 Lock Pin for Chain 8x75,8mm with Circlips d=8mm, for Duplex-Chain 467 371 14,40467 374 Chain Lock 1“ EC-16-M-16B-1, with Retainer, for Chain 467 373 2,45467 380 Chain Tensioner M16x80mm 15,60
467 380
8
3525
80
M16
4020
467 009
6,5
12
1511
6,2
15
5016,5
467 003
8
3011
6,5
467 122 467 124
50
130,5
50
130,5
50
200
467 125
11.2
Wire Cutting Blades / Mounts for Blades
Chains / Sprockets
Shaf
ts fo
r Tw
isti
ng H
ooks
/ Bo
lts
for
Gui
de S
proc
kets
/ W
ire
Cutt
ing
Blad
es /
Mou
nts
for
Blad
es /
Chai
ns /
Spro
cket
s Ty
pe P
AA
L
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 102 11 Wire Guide Roller 10-35-13,5mm S355J2, hardened, with Needle-Bearing 24,00467 101 11 Wire Guide Roller 10-65-13,5mm S355J2, with Needle-Bearing 27,45467 101 17 Wire Guide Roller 10-65-13,5mm S355J2, with Brass-Bushing 27,45
Item No. Product Dimensions Additional Information Price €467 104 Bushing 55-70-75mm Rg7, for Wire Thrust 68,30467 105 Guide Bushing for Needle 40-60/80-70mm POM 16,90467 106 Guide Bushing for Needle 40-50-50mm MS58 24,00467 107 Guide Bushing for Needle 35,5-45-80mm MS58 31,45
55
75
70
467 104
Item No. Product Dimensions Additional Information Price €467 101 06 Extension for Wire Drawing Needle 35x842mm S355J2, with Nut, for Wire Drawing Needle 467 101 20 51,45467 101 04 Extension for Wire Drawing Needle 40x845mm S355J2, with Nut, for Wire Drawing Needle 467 101 03 /-10 51,95467 101 19 Extension for Wire Drawing Needle 40x1031mm S355J2, with Nut, for Wire Drawing Needle 467 101 03 /-10 55,40467 101 05 Extension for Wire Drawing Needle 40x1224mm S355J2, with Nut, for Wire Drawing Needle 467 101 03 /-10 71,05467 101 18 Extension for Wire Drawing Needle 40x1441mm S355J2, with Nut, for Wire Drawing Needle 467 101 03 /-10 76,95
Item No. Product Dimensions Additional Information Price €467 101 20 Wire Drawing Needle, complete 35x1390mm S355J2, with Wire Guide Roller 467 102 11 and Spring Pin 168,45467 101 03 Wire Drawing Needle, complete 40x988,6mm S355J2, with Wire Guide Roller 467 101 11 and Spring Pin 136,00467 101 10 Wire Drawing Needle, complete 40x982mm S355J2, with Wire Guide Roller 467 101 11 and Spring Pin 148,65
467 106
40
50
50
40
70
80
467 105
60
35,5
80
45
467 107
12.1
1031/1441
467 101 19 /-18
40 M24
M24
842
467 101 06
35 M24
M24
467 101 20
35
1390
467 102 11
845/1224
467 101 04 /-05
40 M24
M24
982
467 101 10
40
467 101 11 /-17
M24
988,6
467 101 03
40
467 101 11
M24
M24
Wire Drawing Needles
Guide Bushings for Needles
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 101 07 Wire Thrusting Rod 45x45x2035mm S355J2, with Screw Set, for Mount for Roller 467 110 /-110 02 222,45467 101 08 Wire Thrusting Rod 45x45x2029mm S355J2, with Screw Set, for Mount for Roller 467 110 /-110 03 222,45467 101 09 Wire Thrusting Rod 45x45x1989mm S355J2, with Screw Set, for Mount for Roller 467 110 /-110 04 222,45467 101 14 Wire Thrusting Rod 45x45x1939mm S355J2, with Screw Set, for Mount for Roller 467 110 /-110 05 222,45467 101 15 Wire Thrusting Rod 45x45x1889mm S355J2, with Screw Set, for Mount for Roller 467 110 /-110 06 222,45467 101 16 Wire Thrusting Rod 45x45x1689mm S355J2, with Screw Set, for Mount for Roller 467 110 /-110 07 222,45
2040
40
175
467 048467 050
20
50
160
150
467 046
467 050
467 070
Item No. Product Dimensions Additional Information Price €467 046 Mount for Roller, complete 160x150x50mm with Wire Guide Roller 467 050, Bushing 467 070, Screw and Nut 145,00467 048 Mount for Roller, complete 175x40x40mm with Wire Guide Roller 467 050, Screw and Nut 62,70467 111 Mount for Roller, complete 104x92mm with 2 Wire Guide Rollers 467 047 and Screws 186,00467 049 Mount for Roller, complete 80x50x95mm with 2 Wire Guide Rollers 467 102 11, Screws and Nuts 97,00467 110 Mount for Roller, complete 192x30mm with Wire Guide Roller 467 100 11, Screw and Spring Pin 142,20467 100 Mount for Roller, complete 170x30mm with Wire Guide Roller 467 100 11, Screw and Spring Pin 117,20
Item No. Product Dimensions Additional Information Price €467 050 Wire Guide Roller 12,5-130-19,4mm S355J2 39,10467 047 Wire Guide Roller 6-40-20mm S355J2, with Needle-Bearing 21,00467 100 11 Wire Guide Roller 10-90-19mm S355J2, with Ball-Bearing, Retaining Ring and Bushing 38,30467 043 Wire Guide Roller 10,1-86-19mm S355J2, with Bearing, Retaining Ring and Bushing 38,70467 042 Wire Guide Roller 10-70-19,5mm 42CrMo4, with Needle-Bearing 27,55467 070 Wire Guide Bushing 11-18/22-20mm 16MnCr5, hardened 6,35
467 111
35
35
92
10435
467 047
M24
2035 / 2029 / 1989 / 1939 / 1889 / 1689
45
467 101 07 /-101 08 /-101 09 /-101 14 /-101 15 /-101 16
204030
40170/192
467 100 /-110
467 043 /-042 /-100 11
20
12.2
467 049
80 95
467 102 11
50
Wir
e D
raw
ing
Nee
dles
/ G
uide
Bus
hing
s fo
r N
eedl
es /
Mou
nts
for
Rolle
rs T
ype
PAA
LMounts for Rollers
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
7010
20
467 042
467 100 11
Item No. Product Dimensions Additional Information Price €467 050 Wire Guide Roller 12,5-130-20mm S355J2 39,10467 100 11 Wire Guide Roller 10-90-20mm S355J2, with Ball-Bearing, Retaining Ring and Bushing 38,30467 043 Wire Guide Roller 10,1-86-20mm S355J2, with Ball-Bearing, Retaining Ring and Bushing 38,70467 040 Wire Guide Roller 10-80-21,4mm S355J2 38,00467 041 Wire Guide Roller 10,5-70-23mm PE, with Bushing 14,90467 042 Wire Guide Roller 10-70-20mm 42CrMo4, with Needle-Bearing 27,55467 044 Wire Guide Roller 10-70-20mm 42CrMo4, with Brass-Bushing 27,55467 101 11 Wire Guide Roller 10-65-13,5mm S355J2, with Needle-Bearing 27,45467 101 17 Wire Guide Roller 10-65-14mm S355J2, with Brass-Bushing 27,45467 047 Wire Guide Roller 6-40-20mm S355J2, with Needle-Bearing 21,00467 102 11 Wire Guide Roller 10-35-13,5mm S355J2, hardened, with Needle-Bearing 24,00467 102 12 Wire Guide Roller 10-34-14mm S355J2, with Brass-Bushing 24,00
9010
20
13,5
10 35
467 102 11
23
7010,5
467 041
467 040
8010
21,4
10 34
14
467 102 12
8610,1
20
467 043
467 101 17
14
6510
20
467 050
130
12,5
12.3
7010
20
467 044
13,5
6510
467 101 11
20
6 40
467 047
Wire Guide Rollers
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €467 300 Conveyor Roller 60x200mm with Nuts 36,50467 301 Conveyor Roller 80x960mm with Nuts 110,25467 302 Conveyor Roller 80x1030mm with Wheel Spacers and Nuts 155,70467 306 Conveyor Roller 80x630mm with Wheel Spacers and Nuts 123,00467 307 Conveyor Roller 80x800mm with Wheel Spacers and Nuts 135,60467 308 Conveyor Roller 80x960mm with Wheel Spacers and Nuts 150,40
Item No. Product Dimensions Additional Information Price €467 070 Wire Guide Bushing 11-18/22-20mm 16MnCr5, hardened 6,35467 071 Wire Guide Bushing 18-26/30-36mm 16MnCr5, hardened 7,10
Item No. Product Dimensions Additional Information Price €467 108 Bumper 125x40x45mm Rubber, with Screws 8,15
467 108
6012540
45
21
467 302 /-306 /-307 /-308
1030/630/800/960
80
200/960
60/8
0
467 300 /-301
12.4
467 070
2211 18
1620
467 071
3018 26
1620
Item No. Product Dimensions Additional Information Price €462 300 Air-Filter 95-140-65mm 20,95462 301 Hydraulic-Filter 60-100-234mm 190,70462 302 Hydraulic-Filter 34-60-230mm 151,80462 303 Hydraulic-Filter 44,5-83-315mm 152,50
462 300 462 301 462 302 462 303
Conveyor Rollers
Wire Guide Bushings
Wir
e G
uide
Rol
lers
/ W
ire
Gui
de B
ushi
ngs
/ Con
veyo
r Ro
llers
/ Bu
mpe
r / F
ilter
s Ty
pe P
AA
L
Bumper
Filters
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Type BOLLEGRAAF
Item No. Product Dimensions Additional Information Price €466 201 Wire Drawing Needle, complete 30x299mm galvanized, with Wire Guide Roller 466 200 03 168,00466 200 Wire Drawing Needle, complete 30x344mm galvanized, with Wire Guide Roller 466 200 03 168,00466 200 03 Wire Guide Roller 16-50-27mm 42CrMo4 36,00466 200 02 Screw M12x38mm for Wire Drawing Needles 466 200 /-201 6,80466 190 Extension for Wire Drawing Needle 50x2070mm S355J2, for Wire Drawing Needles 466 201 328,00
Item No. Product Dimensions Additional Information Price €466 260 Track Roller, complete 90-220-121mm with Bearings 660,00466 261 Track Roller, complete 60-150-81mm with Bearings 340,00
Item No. Product Dimensions Additional Information Price €466 290 Shaft for Twisting Hook 42crMo4, with Bearings and Screw 168,00466 270 Twisting Hook 20x110,3mm 42crMo4, hardened 26,00
90 220
134121
466 260
466 200
334
3048
466 200 02
466 200 03
9281
60 150
466 261
466 201
30
299
466 200 03
466 200 02
48
13.1
Item No. Product Dimensions Additional Information Price €466 320 Gas Spring Hub 100mm Retainer 42,00
466 270
20
43
110,3
15
8°
40
38
128,5
79,5
466 290
M10
379
10
466 320
466 200 02
38
M12
SW14
30,5
50
M302070
466 190
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Product Dimensions Additional Information Price €466 258 Wire Guide Bushing 12-22/26-16mm hardened 4,80466 200 03 Wire Guide Roller 16-50-27mm 42CrMo4 36,00466 250 Wire Guide Roller 10,5-90-21mm with Bearing 46,00466 251 Wire Guide Roller 10,5-100-21mm with Bearing 47,00466 252 Wire Guide Roller 17-100-28mm hardened, with bushing 47,00466 253 Wire Guide Roller 10-100-21mm with Bearing 78,00
Type
BO
LLEG
RA
AFType BOLLEGRAAF
Item No. Product Dimensions Additional Information Price €466 300 Sliding Block 480x104x10mm Brass, with Screws and Lock Washers 119,00466 400 Guide Rail 2000x100x15mm HARDOX 450 186,00
Item No. Product Dimensions Additional Information Price €466 240 Mount for Roller 97x26,5x130mm primed 31,00466 241 Mount for Roller 85x79x110mm primed 25,10466 242 Baffle 67x53x40mm primed 7,00
466 251
10,5
100
21
4585 79
30
466 241
802540
1026,5
466 240
130
97
466 242
67 53
40
466 250
10,5
90
21
466 252
3028
100
17
466 253
2124,5
1010
0
13.2
105 105 105 105480
466 300
104
t=10
466 400
2000
100
t=15
466 200 03
27
16 26 5033
11
466 258
1612
1222
-0,2
26
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Type BOA
Item No. Product Dimensions Additional Information Price €467 700 Twisting Hook 20x93mm HARDOX 500 36,00
Item No. Product Dimensions Additional Information Price €467 721 Wire Guide Roller 20-100-25mm PA6, with Bearing 31,40467 720 Wire Guide Roller 20-160-25mm PA6, with Bearing 38,60
20 101
1025
467 721
467 700
93 20
81
M8
81
61
9 15
20
14.1
20 160
25
467 720
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Type PRESONA
3036
5080
25
9
1530
466 000
Item No. Product Dimensions Additional Information Price €466 040 Twisting Hook H=164mm with Shaft, Hook made out of HARDOX 500 148,00466 000 Wire Guide 80x36mm hardened 38,00
466 040
164
Item No. Product Dimensions Additional Information Price €466 025 Wire Drawing Needle 50x234mm galvanized 98,00
466 025
234
M24
x3
50
25
18,5
9
15
26
Type
BO
A /
Type
PRE
SON
A
Item No. Product Dimensions Additional Information Price €466 045 Wire Guide Roller 70/47,5x58mm hardened, with bearing 62,00
466 045
100
70 16 32
11058
60 38 1611
47,5
11
15.1
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Item No. Description Piece Price per Unit € Total Price, net
Invoice Address
Contact PersonFunctionPhone No.Fax No.E-Mail
Delivery Address
DateOrder No.Additional Information
Over-Night Express Next Day Express Normal Delivery
Signature, Company Stamp Name in Capital Letters
Payment:10 days with a discount of 2%: 30 days netFor further Terms of Payment and Delivery see the General Terms and Conditions Total Price, net
19 % MwSt. (VAT-Value added tax)Total Amount
Order Form
16.1
Head Office +49 (0)30 / 200 05 78-80 Sales +49 (0)30 / 200 05 78-81
Fax +49 (0)30 / 200 05 78-99 E-Mail [email protected] Internet www.rewald.eu
Richard-Wagner-Strasse 51 | D-10585 Berlin | Germany
Stand 03082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Ord
er F
orm
/ G
ener
al T
erm
s an
d Co
ndit
ions
REW
ALD
Gm
bH
1. The customer declares himself in agreement with our standard terms and conditions when placing an order. Failure of the customer to reveal any particular terms of business on their side does not in any way imply our consent to them. In particular, the delivery or provision of services does not constitute implied acceptance of the customer’s terms and conditions. Alterations, supplementary agreements and additions to the Standard Terms of Business require our written confi rmation.
2. All offers are subject to change and are non-binding. All documents relating to these offers, including fi gures, drawings, weights or dimen-sions and including any other technical information and references to technical standards and designs merely indicate the object of the agreement and are subject to written confi rmation of technical pro-perties. All prices are quoted for deliveries ex factory including loa-ding in factory and excluding standard packaging and VAT. Our offers are based on the latest technical developments, the relevant accident prevention regulations, safety regulations etc at the time of making the offer.
3. For content and scope of the contract our written confi rmation of the order is defi nitive. Supplementary agreements, additions etc require our written confi rmation.
4. Invoices will be issued on the day of shipment or acceptance of the goods. Payment shall be made in full in the agreed currency within 30days from the date of issue, paid net, or when paid within 10 days less 2% discount from the value of the unpacked goods. In the case of late payment the customer will be liable to pay us interest according to Paragrah 288 BGB. In the event we have several outstanding claims against the customer we shall determine which debt shall be dischar-ged by the payment ( also by allocation to an open account).
5. In the event that after closing of contract we become aware of cir-cumstances which substantially bring the credit-worthiness of the customer into question, or if payment terms are not met, we are enti-tled to demand at our discretion payment in advance of any liabilitiesarising out of the business relationship or to ask for appropriate se-curities.
6. If circumstances arising out of our control, including but not limited to operational disturbances, strikes or lock-outs, freight disruption and any other unforeseeable shortages which occur with our sup-pliers, and which cause the failure or delay of consignments or ser-vices, we reserve the right to deliver at a later date or to withdraw wholly or partly from the contract without the customer having the right to claim damages. In the event of a delay in delivery or services the customer is entitled to withdraw from the contract after the ex-piry of a reasonably extended deadline of at least 2 weeks. Any wi-thdrawal from contract must take place through written declaration.
7. All shipments are insured. A statement of any damages or shorta-ges to the consignment must be drawn up immediately after receipt.Liability for the risk of accidental damage passes to the purchaser when the consignment is handed over to the freight carrier, but at the latest when the consignment leaves the warehouse. Specifi c shipping instructions of the customer are only binding if agreed to in writing. Otherwise delivery will be made as we deem best and under exclusion of any liability for the choice of mode of shipment. Shipment takes pla-ce at the expense of the buyer. For orders within Germany and with a minimum net value of 770 Euro there is no freight delivery charge.
General Terms and Conditions REWALD GmbH
8. The following conditions apply to our warranty and liability for defects in delivery or service, including incorrect delivery or perfor-mance: any claims must be made in writing within I week of receipt of goods or services. In the event of justifi ed complaint, excluding the absence of guaranteed qualities, we reserve the right to remedy the defective delivery or service within a reasonable space of time. Whe-re applicable, we may recall the defective goods and supply a repla-cement; we will not assume responsibility for the costs of assembly, disassembly, or installation. The customer is obliged to allow us the opportunity for rectifi cation during normal working hours by prior agreement.
9. Weretain title to all goods supplied pending full and complete pay-ment and until all present and future claims arising out of the bu-siness relationship have been met. If the customer acquires sole or shared ownership on the basis of the joining, combining, mixing or processing of our consignment (with other consignments) then we shall have ownership to the ratio of the value of our consignment in relation to the other goods with which it is joined, combined or mixed. Any treatment or processing is covered according to Paragraph 950 BGB without any obligation on our part. Furthermore is any resale prohibited.
10. Only goods specifi cally listed on the delivery note can be returned. Goods which have been damaged are non-returnable. The cost andrisks of return freighting of the returned goods will be borne by the customer. Returned goods will be refunded less a deduction of 20% of the purchase price.
11. The relinquishing of claims against the customer which are due to us in the business relationship is excluded.
12. We will only be liable for deliberate or gross negligence of our agents and senior management, or vicarious agents and assistants. Otherwise any claims for damages arising from fault during the cont-ract negotiations, from actual breach of contract, arising out of a pu-nishable act, or contractual rights ( such as consultation or informa-tion about qualities, applications, service requirements etc) are ruled out. In particular we will only be liable for consultations for which a separate payment was agreed.
13. Place of despatch for all shipments and payments is Berlin, Ger-many. Sole place of jurisdiction is Amtsgericht Berlin-Charlottenburg.
14. The contractual relationship is governed by German law. The ap-plication of the uniform law governing the international purchase ofmovable objects is excluded.
15. Should any of the abovestated provisions be either fully or in part invalid, the validity of the remaining provisions of contract shall not inany way be affected.
Prices marked with * cannot be reduced further.
17.1
Container- & Compactor Components
Office Richard-Wagner-Straße 51, 10585 Berlin, Germany
Warehouse Hafenstraße 1, 16727 Velten, Germany
Head Office +49 (0)30 200 05 78 - 80
Sales +49 (0)30 200 05 78 - 81
Fax +49 (0)30 200 05 78 - 99
E-Mail [email protected]
Internet www.rewald.eu