Upload
basant-singh
View
226
Download
0
Embed Size (px)
Citation preview
8/14/2019 COMPLETED PROJECT.docx
1/111
SUMMER PROJECT REPORT
ON
MARKETING ANALYSIS OF ITI
Prepared for and Presented to
ITI LIMITED, MANKAPUR
UNDER THE GUIDANCE OF
MR.S.S.Bisht Smt. Garima Srivastava
Manager-HR(ED) Prof. Business of Law
ITI LIMITED ICCMRT, Lucknow
MANKAPUR
SUBMITTED IN PARTIAL FULLFILLMENT FOR THE AWARD OF DEGREE OF MASTER OFBUSSINESS ADMINSTRATION FROM GAUTAM BUDDHA TECHNICAL UNIVERSITY
BY
ASHOK RATNA VERMA
ROLL NO. -1212470034
INSTITUE OF CO-OPERATIVE AND CORPORATEMANAGEMENT,RESEARCH & TRAINING,LUCKNOW
8/14/2019 COMPLETED PROJECT.docx
2/111
ACKNOWLEDGEMENT
I owe a great many thanks to a great many people who helped and
supported me during the writing of this project. My deepest thanks to SMT.
GARIMA SRIVASTAVA the Guide of the project for guiding and correcting
various documents of mine with attention and care. He has taken pain to
go through the project and make necessary correction as and when
needed. I express my thanks to the Principal of, ICCMRT LUCKNOW,
for extending his support. My deep sense of gratitude to, SHRI S.S.BISHTMANAGER-HR ED, ITI LTD MANKAPUR, GONDA support and guidance.
Thanks and appreciation to the helpful people at SHRI S.K.SAPRA DGM-
MARKETING & SHRI DEVASIS PATNAYAK, ENNG. MARKETING ITI LTD
MANKAPUR GONDA U.P. for their support. I would also thank my Institution
and my faculty members without whom this project would have been a
distant reality. I also extend my heartfelt thanks to my family and well
wishers.
ASHOK RATNA VERMA
Roll NO: 1212470034
8/14/2019 COMPLETED PROJECT.docx
3/111
DECLARATION
I hereby declare that the project work entitled International Business of ITI Ltd.
Mankapur submitted to the ICCRMRT,Lucknow is a record of an original work
done by me under the guidance of Shri S.S Bisht Manager-HRED & Shri Devasis
Patnayak and this project work has not performed the basis for the award of
any Degree or diploma and similar project if any.
ASHOK RATNA VERMA
Roll NO:1212470034
8/14/2019 COMPLETED PROJECT.docx
4/111
TABLE OF CONTENTS PREFACE
ACKNOWLEDGEMENT
DECLARATION
TABLE OF CONTENT
COMPANY PROFILE
ABOUT THE TOPIC
SWOT ANALYSIS
RESEARCH OBJECTIVE
RESEARCH METHODOLOGY
ANALYSIS
RECOMMENDATION
LIMITATION
CONCLUSION
BIBLIOGRAPHY
ANNEXURE
8/14/2019 COMPLETED PROJECT.docx
5/111
COMPANY PROFILE
ITI ltd is the firsts public sector enterprise.
Established in India Telephone industries Ltd, a departmental undertaking under the ministry of post
and telegraph, it was envisaged as an indigenous manufacturing facility in the beginning.
ITI LTD Has since emerged with its own corporate identity, as a leading telecom company
manufacturing the entire range of telecom equipment, which includes telephones, large
digital switches, transmission system, digital microwave, fiber optic system and satellite
communication systems.
Vibrant R&D supports striving for excellence in quality cost effectiveness in its products and
services, with talented engineers, state of art.
A dedicated network system unit provides value added services such a shared hub VSAT
services and MRTS and turnkey solutions .
8/14/2019 COMPLETED PROJECT.docx
6/111
BOARD OF DIRECTORS
ShriY.K.Pandey - Chairman & Managing Director
Shri Vijoy Kumar - DDG - PIP
Smt. Anuradha Mitra- DDG - EAF Dept. of Telecommunications Govt. of
India
Shri Pankaj
Agrawala,IAS
- Joint Secretary Dept. of Information Technology,Govt.
of India
Shri C.S.Verma - Director Finance,ITI LIMITED
Shri J.K.Verma - Director - P ,ITI LIMITED
Lt. Gen. Davinder
Kumar- VSM, SO-IN-C
http://localhost/var/www/apps/conversion/tmp/scratch_8/chairman.htmhttp://localhost/var/www/apps/conversion/tmp/scratch_8/chairman.htmhttp://localhost/var/www/apps/conversion/tmp/scratch_8/chairman.htm8/14/2019 COMPLETED PROJECT.docx
7/111
MISSION
The mission of the company is to be the leader in the domestic market and an important global
player in voice, data and image communication by providing total solution to customers, to build on
core competencies to enter into the new business area.
The company manufactures entire range of telecommunication system.ITI is in involved in design,
development, manufacturing and installation and commissioning of telecommunication system to
meet specific need of customers.
8/14/2019 COMPLETED PROJECT.docx
8/111
AWARDS AND ACHIEVEMENTS
Safety awards for raebareli, palakkad and Bangalore
Three plants of ITI have won the national safety awards for outstanding performance in
industry. Safety during the year 2004, which were presented at a function, held in New Delhi
recently
Rae bareli and palakkad plant received the award for achievement based on longest accident
free year. The runner up award based on longest accident free year was a awarded to
banglore and rae bareily respectively.
Energy conservation award to mankapur
ITI Mankapur plant, which saved energy to the tone of 384 lakh during the last 3 year, has
won the national energy conservation award in 2004. First prize for the best prize productivity in 1990 by national productivity
council
8/14/2019 COMPLETED PROJECT.docx
9/111
SALIENT FEATURES OF MANKAPUR PLANT
Established - 1982
Start of construction - 31-05-1983
Start of production - April 1985
Annual capacity - 500kl(E-10B)
500KL(CSN-OCB283)
Capital cost of E-10B - Rs219.00cr
CSN - RS31.41cr
MAX-L - Rs3.30cr Land - 352Acres
Factory covered area - 77,500 sq m
Air conditioned area - 44,300 sqm
FDV space in factory - 200sq m
Compressed air - 7000sq m
Installed capacity of power station- 16000KVA
8/14/2019 COMPLETED PROJECT.docx
10/111
From UPSEB &5800KVA
Captive power
Generation
Water storage capacity - 50lakh
Total manpower - 2358 Nos. Annual capacity
Of component plant connectors
1000000 relay
1400000 C&T
15,000 MDF
Mechanical - Rack-3500
Hybrids-1800000
PCBS-26000 sq m
ISO Certification - 9001:2000
ABOUT THE MANKAPUR UNIT
Mankapur was established in 1982 with the technical collaboration of CIT ALKATEL, FRANCE to
manufacture E10B type of digital switching system. This E10B was a gift for India from RAJIV GANDHI
(former prime minster of India) also the technology that time arises a revolution in India Telecom
Sector.
ITI manufactures MAX-L & MAXXL exchanges based on C-DOT technology which replaced the E10B
Exchanges. The unit is also manufacturing CSN-MM racks used in exchange.
ITI Ltd. Mankapur as made a significant place in the electronic maps of India and has earned the
distinction of digital city of India.
ITI Ltd. Mankapur has also entered into the non communication field with its note counting machine,
note bundling machine, fake note detector, inverter etc.
8/14/2019 COMPLETED PROJECT.docx
11/111
It is the first unit in India which got opportunity to manufacture BTS. It started manufacturing BTS in
the year 2005.
MAIN DIVISION
Mobile project division
Switching exchange assembly plant
Component division
Circuit division
Central service division
Our product range is
Current1. E-10B Exchanges (Expansions)2. CSN for OCB 283
(in collaboration with M/S Alcatel, France)
3. MAX-L & MAX-XL (C-DOT Exchanges)4. Network Synchronization Equipment (C-DOT)5. MDF (Main Distribution Frame)6. Line Jack Units7. GSM Equipment Installation & commissioning,
(in collaboration with M/S Lucent Technologies, USA)
8. Patch Panel Antenna ,
9. Miscellaneous Mech. Piece Parts on CNC Machines10. component Shop : Moulded Piece Parts , Connectors, Coil &
Transformer, PCBs & Hybrid Manufacturing.
Planned
11. BTS (GSM Equipment ) manufacturing in collaboration withM/S Alcatel, France in this year starting from Nov-2004.
8/14/2019 COMPLETED PROJECT.docx
12/111
Our High-Tech Assembly And Testing Facilities / Infrastructure:
1. Assembling SMD Cards with maximum 326 SMDs on one card.2. Capable of handling SMDs of various sizes
a) Smallest 1 mm x 0.5mm
b) Largest 14 mm x 18 mm (S08 package)
3. Soldering processa) No clean flux type m/c.b) Dual wave soldering m/c.
4. Inspection of SMDBuilt in vision system in the head of the pickand place machine.
5. Capability to manufacture racks with EMI protection compliant toETSI specification.
6. Testing
a) Various functional card tester for C-DOT and ALCATELproducts.
b) Telecom testers for anologic cardsc) Incircuit tester for all kind of cards
8/14/2019 COMPLETED PROJECT.docx
13/111
Our IT infrastructure:
1. 100 MB Optical fibre based switched LAN with 250 nodes.2. LAN equipped with NMS features3. Internet / Intranet facilities with our own web page for intranet
usage.4. Internet enabled BAAN ERP System with Windows NT / Oracle
under implementation.
Technology handled:
1. E-10B Digital SwitchTechnology Transfer from M/S ALCATEL, France.
2. TNE/GAS (PCM systems)
3. Network Synchronization Equipment (NSE) Technology Transfer from C-DOT, India
Layer 2 to Layer 5.4. OCB 283 / CSN
Technology Transfer from M/S ALCATEL, France.
5. MAX-XL
Large switch from C-DOT, India
8/14/2019 COMPLETED PROJECT.docx
14/111
Switching Equipment Assembly (SEA) Division
This division is responsible for assembly manufacture of all sale-able products for
supply to customers. The process has been set up in association with Engineers of
ALCATEL, France (the collaborator) and Quality System has been implemented
according to strict requirement of International Standards (an ISO-9001 Unit of ITI).This division has two assembly group:
i) Non SMD PCB Assemblyfor E-10B (OCB 181) system.Different components and devices are prepared for Assembly on component
forming machine for leads forming and cutting. These devices are inserted on
the PC Boards and soldered on wave soldering machine. Visual inspection
and there after testing on dedicated Dynamic Functional Tester, insures a
good quality. These passed boards are then integrated with the racks, which
is prepared parallely, involving operation of Mechanical Assembly, wire
preparations, panel assembly and wiring etc.
At system integration platform, functional testing of equipped racks is done
before offering the product to customer (DOT) for acceptance.
ii) Surface Mounted PCB Assemblyfor CSN (OCB 283) Systems.
Most of the components devices to be assembled on PCBs by Automatic Pickand place machine (SMD). However, a few leaded components are manually
inserted on the boards. Then wave soldering is done. PC Assemblies arevisually inspected and then taken to universal manufacturing Defect Analyser(MDA). Since it is not functional tester any new card can be tested on it.
8/14/2019 COMPLETED PROJECT.docx
15/111
The subscriber line cards are subjected to functional test as these are standalone sale-able products. However other cards are not subject to functional
testing and these are integrated with the racks. The racks are put under thefunctional testing.
In order to meet the technological advances achieved world wide andcompetition, as per liberalised industrial policy, where in Govt. of India hasallowed Private operators to provide basic services in telecommunication, ITIMankapur has gone for upgrading its product technology as per the marketrequirements, as and when required. The electronics switch E-10B (OCB 181
specification) hitherto being manufactured at Mankapur has been upgradedto OCB 283 level for ISDN facility and CCIIT No. 7 common channel signaling.
8/14/2019 COMPLETED PROJECT.docx
16/111
PRODUCT OF ITI MANKAPUR
TELECOM PRODUCT
CDMA
BASE TRANSMISSION STATION
Indias first public sector unit (PSU)-ITI Ltd was established in 1948. Ever since, as a pioneering
venture in the field of telecommunication, it has contributed to 50% of the present national
telecom network. With state-ofthe-art manufacturing facilities spread across six location
and a countrywide network of marketing /service outlets, the company offers a complete
range of telecom products and total solutions covering the whole spectrum of switching
,Transmission, access and subscriber premises equipment.
ITI joined the league of world class vendor of global system for mobile (GSM) technology withthe inauguration of mobile equipment manufacturing facilities at its mankapur and rae bareli
plants in 2005-06. This ushered in a new era of indigenous mobile equipment production in
the country. These two facility supply more than nine million lines per annum to both
domestic as well as export markets.
The company is consolidating its diversification into information and communication
technology (ICT) to hone its competitive edge in the convergence market by deploying its rich
telecom expertise and vast infrastructure. Network Management Systems, encryption and
networking solutions for Internet connectivity are some of the major initiatives taken by the
company.
8/14/2019 COMPLETED PROJECT.docx
17/111
CDMA( Code Division Multiple Access )
CDMA (code division multiple access ) is a digital wireless technology to provide mobilecommunication. CDMA wprks by converting speech into digital information, which is then
transmitted as a radio signal over a wireless network. CDMA uses a unique code to distinguish
each different call. The receiving device is instructed to decipher only the data corresponding
to a particular code to reconstruct the. This enables many subscribers to share the same
frequency band and , at the same time , without any cross talk or interference.
CDMA WLL technology provides option of limited as well as full mobility to the customers.
This helps to provide faster last mile connectivity, where laying of cables is difficult.
8/14/2019 COMPLETED PROJECT.docx
18/111
BTS (BASE TRANS-RECEIVER STATION )
Base Trans-Receiver Station (BTS) BTS A-9100, is radio frequency mobile communicationproduct based on GSM technology. It is a set of equipments that facilitate wireless
communication between user equipment (UE) and a network . A BTS in general consists of
Trans-Receiver Module, Antenna Network Combiner, Controller(SUMA) & Alarm Extension
system (XIBM). It is a self contained unit for transmitting/ receiving signal for mobile
communication.
Types of BTS:-
1. Indoor BTS
2. Outdoor BTS3. Dual Band BTS
4. Twin TRX BTS
8/14/2019 COMPLETED PROJECT.docx
19/111
THE NON-TELECOM PRODUCT ARE
NOTE COUNTING MACHINE (NCM)
FAKE NOTE DETECTION MACHINE
INVERTERS
8/14/2019 COMPLETED PROJECT.docx
20/111
*NOTE COUNTING MACHINE
FEATURES- ITIS Notecounting machine can be used for counting a wide variety of freshly issued,
soiled and old currency notes whether bundled or loose.
MODELS- ITIS note counting machine are available in two models with functional features being
the same in both the models.
FLOOR MODEL-ANCM-01
DESKTOP MODEL- ANCM-02
THE MACHINE HAS THE FOLLOWING FEATURES WHICH ENABLE QUICK AND
ACCURATE COUNTING :
Advanced solid-state electronics and precision tool mechanical assembly which provide highly
accurate and reliable performance.
Silent and smooth operation at super high counting speed.
Vacuum suction is provided by a build-in vacuum pump, which has a filter to keep out dust
and fiber, thus increasing the life of machine.
Maintains hygienic condition for the operator.
The machine automatically adds the continuously counted in free count, batch and check
mode.
The accumulated count is stored in the memory and retained after power OFF and will display
again on power ON.
The machine can count different denominations of Currency Notes and has a ca[acity to insert
upto 200 notes.
8/14/2019 COMPLETED PROJECT.docx
21/111
The pip alarm will automatically sound a warning if the counted no is not equal to the present
no. in CHECK and BATCH modes.
Tropicalised diagnostics with easy error codes for easy maintenance by quick fault detection.
IN-HOUSE COMPONENTS MANUFACTURING FACILITY :
The unit is vertically integrated and has set up in - house facilities to manufacture
components required for exchange assembly. As the unit is set up in a remote areaand there were no reputed suppliers of components required for assembly of
electronic circuits . A class components required for the assembly of the systemare manufactured in-house except electronic components like integrated circuits,
active and passive components etc. It has an excellent assembly line for leaded aswell as SMD components and SMPS. Additionally, unit has its own R&D having allthe possible facilities to design, manufacture and supply state-of-the-artassemblies used in Electronic Exchanges tailored to the customers needs. TheR&D of Mankapur unit has made a big contribution in absorption of Technologyand brought out new products with innovative methods. Following manufacturingplants have been set up in the unit alongwith
assembly line.
a) Electro mechanical component assembly plants
Components plant as one of the division of Mankapur unit has been set up
to manufacture Connectors, Relays, Busbars, Coil & Transformers andMDFs used for the switching equipments assembly. Unit production potentialhas been extended, which has enable the unit to market its products rangingfrom customer designed components to off-the-shelf components to a broad
clientele.
8/14/2019 COMPLETED PROJECT.docx
22/111
b) Metal Parts Manufacturing Plant
Very high standard of quality is required in the manufacturing of frames for
electronic exchanges. In view of this ITI Mankapur has developed its ownMetal Parts Plant for Sheet Metal Parts manufacturing and surface treatmentoperations. Comprehensive manufacturing process involving CNC PressPunching and CNC Bend Press, Shearing, Bending, Punching, Forming,Drilling, Welding, Silk Screening Assembly etc. are arrived out by a team of
skilled personnel utilising advanced production techniques. The plantsupported by a wide range of machinery with diverse applications enables to
market product range from assembled racks accessories. Edge strips, framesetc for housing switching, energy, transmissions systems for a variety ofapplications at installation site within a very short time. In addition to thisthe facilities are up to the mark for surface treatment like plating, painting,
sandblasting operations etc. A separate Gold Plating line is set up for platingof contacts required for connectors, Zn platings, Ni-Plating and Sn-pb PlatingLines are new facilities / infrastructure created over last 3-4 years only.
8/14/2019 COMPLETED PROJECT.docx
23/111
C) CB MANUFACTURING PLANTPRINTED CIRCUIT BOARD
PCB MANUFACTURING FACILITY WAS SET UP IN 1986 UNDER COLLOBARTION OF ALCATEL, FRANCE.
SALIENT FEATURES
PRODUCT - DOUBLE SIDED PTH PCB
SINGLE SIDE PCB
PRE CUT MODULES
BACK PANELS FOR SOLDERLESS INSERTION
SPARE CAPACITY -10,000 SQM
STANDARDS- MIL-P-55110 D
MIL STD-275 E
APPROVALS - ALCATEL
C-DOT
MAJOR -CNC DRILLING M/C
EQUIPMENTS CNC ROUTING M/C
COMP. PLATING LINE
BBT TESTING
TRAINED MANPOWER- 100
PROCESS CAPABILITY
MAX. BOARD SIZE - 660 X 300 mm
BOARD THICKNESS - 0.8mm 3.2mm
8/14/2019 COMPLETED PROJECT.docx
24/111
COPPER FOIL THICK. - 17 70 Micron
MIN. TRACK WIDTH - 5 mil
TRACK TO TRACK SPACING 5 mil
ASPECT RATIO - 5
HOLES PER SQINCH - 50
FINISH - SMOBC
SOLDER MASK - PISM
RAW MATERIAL - FR-4/CEM-1 CCL
INPUT REQUIRED
GERBER DATA IN FLOPPY/CD
PHOTO FILMS
MECHANICAL DRAWINGS
APPLICABLE STANDARDS
INSPECTION & ACCEPTABILITY CRITERIA
LEAD TIME REQUIRED
FIRST PROTOTYPE - 15 DAYS
FIRST PRODUCTION LOT - 15 DAYS
ITI Ltd. Mankapur has established its own PCB Plant to manufactureprofessional grade Printed circuit Boards to meet the requirements of E-10B,CSN and MAX-L/XL (selective) system. The PCB Plant covered in an area of4500 sq. meter in the controlled environment and most modern highlyautomatic production lines is having rated production capacity of 10000 sq.meter of Double Sided Plated through holes type of PCB. Quality and Process
Control at different stages of production is monitored by most sophisticatedequipments thereby achieving competitive quality level four large categories ofproducts of professional quality conforming to MIL-P55110D aremanufactured.- Double sided with PTH
- Back panels for solderless insertion technology- Press-cut modules- SMOBC
8/14/2019 COMPLETED PROJECT.docx
25/111
d) Hybrids Manufacturing Plant
Hybrids circuits are to solve the inter connection and packaging problems
involved with the use of LSI-VLSI circuits in high density applications. Hybridplant is established to manufacture high technology. Thick Film Circuitsproduced by sophisticated produced methods & modern productionequipment, automated production lines, flexible for customers applications byhighly skilled and competent work force achieving quality standardsequivalent to MII STD 883C Trimming accuracy up to = 0.3 % for resistanceare achievable. Rated annual production capacity of plant is 1.8 millioncircuits.Hybrid plant of the unit was first division to achieve ISO-9002 Accreditation.
8/14/2019 COMPLETED PROJECT.docx
26/111
e) Computer DivisionComputer centre of ITI Mankapur has state-of-the-art facility for information
processing. The division has well trained and skilled Engineers and Staff andis currently made BaaN ERP system alive in the unit. KEYuser/Development Tools training is over and also End-user/Resource-persontraining is also over. The system is now operational from mid of year 2001.
8/14/2019 COMPLETED PROJECT.docx
27/111
f) R&D Activities
In-house R&D at Mankapur has been working towards achieving companysobjective for excellence in the field of telecommunication. Main activities R&D
division are :-1. Assimilation of technology,2. Product Support and obsolescence management,3. System up-gradation and development,4. Product development,
The group has completely assimilated the E-10B switching technology. After
incorporating the field requirements and technological developments E-10Bhas now become an Indian Switching technology with improved quality ofreliability and reduced cost.True demonstration of technology assimilation is the development of 1000
port Automatic Branch Exchange (MPABX-1000). This PABX system hasadvanced facilities like multi-line operator control PC based O&M console, use
DTMF dialing and extension metering & billing PABX-1000 system has beenawarded as Best Technology System during WISITEX-96 Exhibition.
R&D is extending solution to most of the field installation and
commissioning problems are extended by R&D. It also provides productionsupport by means of technical clarification, development of testing,
documents generation etc.
8/14/2019 COMPLETED PROJECT.docx
28/111
f) Marketing Activities1) At present, ITI Mankapur is involved in marketing and supply business of GSM products, with a plan to
start manufacture them in near future as well as GSMTurn key project (Installation, Commissioning
& Maintenance) .
2) Switching equipment ITI Mankapur has signed an agreement with DOT Lucknow to provide telephone services under Group-in-Dialing (GID) Schemeto shopping and residential complex at Lucknow through MPABX-1000Switching equipment.
3) Export has been made to following countries ;a) NEPAL b) YEMAN c) SRILANKA
d) SOUTH AFRICA e) BANGLADESH f) MALAYSIA
g) VIETNAM h) MADAGASCAR i) RWANDA
j) UGANDA k) SUDAN l) GAMBIA, etc.
4) Export Values in the last four years are given below:
YEARS EXPORT - VALUE
1996-97 1.27 Crs.1997-98 2.15 Crs.1998-99 3.32 Crs.
1999-2000 1.80 Crs.2000-2001 No Order
8/14/2019 COMPLETED PROJECT.docx
29/111
h) Total Quality Management
Manakapur Unit has been accredited with ISO-9001 Certification, in October 1999for 3 years, subject to every 6 months of surveillance audit . The Unit is nowmoving towards adopting the concepts of Six Sigma Philosophy.
8/14/2019 COMPLETED PROJECT.docx
30/111
CUSTOMERS
INDIAN CUSTOMERS
- DEFENCE
- RAILWAYS
- DEPARTMENT OF TELEPHONE
- OIL SECTOR
- BANKS/FACTORIES/OFFICES
GLOBAL CUSTOMERS
- AFGANISTAN
- MALAYSIA
- NEPAL
- SWITZERLAND
8/14/2019 COMPLETED PROJECT.docx
31/111
INTERNATIONAL ORGANISATION FOR STANDARDISATION
ISO stands for International Organization for standardization. ISO is a worldwide federation of
national standard bodies. The work of preparing international standards is normally carried out
through ISO technical committee. Each member body interested in a subject for whom a technical
committee has been established has the right to be represented on the committee.
Standards are the level of excellence in everything that we can do, so it was felt that there should be
global system and hence iso came into existence. Its office is located in Geneva (Switzerland).
ISO STRUCTURE
100 or more countries
9000 standards
200 technical committees
800 sub committees 2500 engineers.
8/14/2019 COMPLETED PROJECT.docx
32/111
TYPES OF ISO DOCUMENTS
Specification
Guidance
Guides/tools
Technical reports
BENEFITS OF ISO
Customer loyalty
Repeated business & referral
Reduction cost & cycle time
Self esteem
Confidence of interested party
Recingnition
ISO:9000
ISO 9000 describes fundamental of quality management system & specifies the technology for quality
management systems.
8/14/2019 COMPLETED PROJECT.docx
33/111
ISO:14000
The growth of human civilization is marked by rapid industrialization. The rapid & blind growth of
industries without paying head to the environment has wrecked havoc on earth.
ISO 14000 standard are known as environment management system.
ISO14000 lays stress on
System efficiency
Scrap and waste reduction
Pollution prevention
Improved environment performance
Implementing government regulation
PHILIPS, AUSTRIA was the first company in the world to take ISO 14000 certificate.
PARAMETERS OF ISO
QUALITY :It is total characteristics of anything which bear the ability to satisfy the stated or
any implied needs.
OBJECTIVES :Objectives of any organization reflect the goals which it aims to achieves and
the priorities required. ISO standard lay stress on smart objectives.
S: SIMPLE
M: MEASURABLE
A: ACHIVEABLE
R: REALISTIC
T: TIME BOUND
QUALITY PRINCIPLES:
COUSTMER FOCUS
LEADEARSHIP
8/14/2019 COMPLETED PROJECT.docx
34/111
INVOLVEMENT OF PEOPLE
SYTEM APPROACH TO MANAGEMENT
PROCESS APPROACH
CONTINUAL IMPROVEMENT
FACTUAL APPROACH TO DECISION MAKING MUTUAL BENEFICIAL SUPPLIER RELATIONSHIP
SIX SIGMA
Six sigma is a measure of quality that strives for near perfection.
It is a rigorous and systematic methodology that utilizes information verified by facts and statistics to
measure and improve an organizations operational, practice and system by identifying prevention
defects in manufacturing and service related processes in order to anticipate and exceed expectation
of all public stakeholders to accomplish effectiveness.
Six sigma is a process which talks about the ultimate quality.
Six sigma can be described as TQMS (Total Quality Management System) that is it is a series of steps
which involve statistical measurement that tells us how good our product services and processes
really are.
HISTORY OF SIX SIGMA
8/14/2019 COMPLETED PROJECT.docx
35/111
The roots of six sigma as a measurement standard can be traced back to Carl Frederick gauss (1777-
1855) who introduced the concept of the normal curve. Six sigma as a measurement standard in
product variation can be traced back to the 1920s when Walter shewhart showed that three sigma
from the mean is the point where process requires correction. Many measurement
standards(cpk,zero defect,etc) later came on the scene but credit for coining the term six sigmagoes to a Motorola engineer named bill smith.(incidentally, six sigma is federally registered
trademark of Motorola).
In the early and mid-1980 with chairman bob galvin at the helm, Motorola engineer decided that the
traditional quality levels- in measuring defects thousands of opportunitydidnt provide enough
granularity. Instead, they wanted to measure the defect per million opportunities. Motorola
developed this new standard and created the methodology and needed cultural change association
with it. Six sigma helped Motorola realize powerful bottom- line results in their organization- in fact,
they documented more than $16 billion in saving as a result of our six sigma efforts.
Since then, hundred of companies around the world have adopted six sigma as a way of doing
business. This is a direct result of many of Americas leaders openly praising the benefits of six sigma.
Leaders such as Larry bossidy of allied signal (now Honeywell), and jack Welch of general electric
company. Rumor has it that Larry and jock were playing golf one day and jack bet Larry that he could
implement six sigma faster and with greater result at GE than Larry did at Allied signal. The results
speak for themselves.
METHODS TO APPLY SIX SIGMA
DMAIC PROCESS :
This process is applied where the line has already established.
DDEFINE
MMEASURE
AANALYSEIIMPROVE
CCONTROL
DMADV PROCESS:
DDEFINE
8/14/2019 COMPLETED PROJECT.docx
36/111
MMEASURE
AANALYSE
DDESIGN
VVERIFY
ERP USED IN ITI LIMITED
ERP means enterprise resource planning.
The ERP used ITI LIMITED is BAAN.
BAAN :-
Founded by Jan Baan in 1978 in the Netherlands. BAAN manufacturing control system waste first package developed by BAAN for MRPI, CRP, &
MRP2.
The company BAAN has become one of the worlds biggest software group & expects to
remain on a first track for the foreseeable future.
8/14/2019 COMPLETED PROJECT.docx
37/111
BAAN solution are to achieve streamline the planning process by integrating diverse
information, ensuring smooth planning with the help pf BAAN we get better decisions
support.
MARKETING CONCEPTThe marketing concept holds that key to achieving organizational goals consists of being more
effective than competition integration activities toward determining and satisfying the needs
and wants of target markets.
The marketing concept has been expressed in many colorful ways.
meeting needs profitability
Find wants and fills them
Love the customer, not the product
Selling focuses of the need of seller marketing of the need of the buyer selling is product with
sellers need to convert his product into; marketing with the idea of the satisfying the needs ofthe customer by means of the product and the whole cluster of the things associated with
creating. Delivering and finally consuming it.
The marketing concept rests on four pillars:
1. Target market
2. Customer need
3. Integrated marketing
4. Profitability
It starts with the factory focuses on the companies excising product, and calls for heavy
selling and promoting to procedure profitable sales. It starts with a well defined marked,focuses on customer needs. Integrated all the activities that will affect the customers &
product profit by satisfying customers.
In the word of ITI marketing managers:
CUSTOMER IS NOT ONLY THE KING,
CUSTOMER IS EVERYTHING.
CUSTOMER NEED
A company can define its market but fail to fully understand the customers need.
Some marketers draw a distinction between responsive marketing and creating matching.
A creative marketer disserves and product solution that customer did not ask for but to
which they entinoursatically respond. Companies must go beyond just asking consumers
what they want.
8/14/2019 COMPLETED PROJECT.docx
38/111
The easy to customer rention is customer satisfaction. A highly satisfied customer:
Stay loyal longer.
Buys more as the company introduce new products and upgrades existing products. Talks favorably about the company and its products.
Pay less attention to competing brands.
Offers products/ services ideas to the company.
Costs less to server than new customers because transaction is routinized.
INTEGRATED MARKET
When all the companies department work together to serve the customers interests, the
result is integrated marketing. Unfortunately not at all employees are trained and
motivated to work for the customer.
Integrated marketing takes place on two:
8/14/2019 COMPLETED PROJECT.docx
39/111
First: the various marketing function sales force, advertising, product management,
marketing research and so on must work together.
Second: marketing must be well co-ordinated with other company departments.
Marketing does not work when it is merely a department, it works only when allemployees appreciate their impact on customer satisfaction.
PROFITABILITY
The ultimate purpose of the marketing concept is to help organization achieve their goals
in the case of private firms the major goal is profit.
THE SOCIETAL MARKETING CONCEPT
Holds that organizations task in to determine the needs, wants and interests target markets and to
deliver the desired satisfaction more effectily and efficiently than competitions in a way that
preserves or enhances the consumers and the societys well being.
8/14/2019 COMPLETED PROJECT.docx
40/111
The social marketing concept calls upon marketers to build social and ethical considerations into their
marketing practices. They must balance and juggle the often conflicting criteria profits, consumer
want satisfaction and public interest.
FINANCIAL OBJECTIVE
Earn and annual rate of return of investment.
Product profits.
Produce a cash flow.
MARKETING OBJECTIVE
8/14/2019 COMPLETED PROJECT.docx
41/111
The ultimate objective of any marketing activity is to satisfy the customers and today even a step
ahead.
The marketing will focus greater attention on how to deliver customer satisfaction and organization
will begin to structure itself around segments and not product lines.
The financial objectives must be converted into marketing objective.
Example: If yhe company wants to earn $1,80,000 profit and it target margin in 10% an sales, then it
must set a goal of $18 million in the company sets an average price of $260, it must sell 69,230 units
if it expect total industries sales to reach 2.3 million units, it must gain 3% of to maintain this market
share, the company will have to set certain goals for consumer awareness, distribution coverage and
thus the marketing objective.
Achieve total sales revenue.
Expand consumer awareness.
Expand the number of dealers.
Aim for an average price.
MARKETING OBJECTIVE:
8/14/2019 COMPLETED PROJECT.docx
42/111
[ OPERATION NAV SATABDI]
PRODUCTIVITY:For greater prosperity, global competiveness capacity exploitation shorter, new
technology adoption cycle time.
PROFITABILITY : Vow to make each unit profitable in the current year. Vow to cut wastage Vow to
cut inventory & working capital.
PARIVARTIAN: Parivartian means change. Change for betterment in every field, change for mind
set to accept new ideas & accept new ideas & accept reorganization revitalization of company to
make future oriented. Accept change to survive in the world of competition.
8/14/2019 COMPLETED PROJECT.docx
43/111
SOME OF THE STRATEGIES ADOPTED BY ITI ARE AS FOLLOWS
Entering into service sector such as annual maintenance contract.
Expansion of portfolio with defense, railway other state government.
ITI also penetrating the market ITI captures the private vendors (who have registered them
with ITI) for the sale of their registered vendors, so that a mutual benefit can generated :-
Vendors can earn more profit by selling these products & the sale of the ITIs product will
increase.
AUTHORITY AND RESPONSIBILTY
The head of marketing has the authority to receive the order and confirm its to acceptation its
satisfaction. He is responsible for marketing function with respect to non- D.O.T> customer and
explore new market avenue to manage and perform the function and maintain the following
organization chart responsibility and interfacing department matrix.
8/14/2019 COMPLETED PROJECT.docx
44/111
FUNCTION OF MARKETING DEPARTMENT
Marketing department of ITI mankapur has always been involving in the function of marketing Ex.
Selling distribution, promotion, the department of these function are depend upon the performance
of marketing department. Marketing department is responsible for selling of ITIs product.
The major product of ITIs E10B which is an exchange and OCB 238 equipment and component is
hybrid, PCB, coil and transformers and connector. In which most department product is E10B
equipment, ITI produces many communication equipments and also other by products which is being
products which is being produced while E10B is in production. Marketing department is also working
for new project named OCB283/CSN. In the context of selling these products marketing department
is take care of same specific customer DOT ansd MTNL customer. Marketing department has theresponsibility for marketing of these product, here researcher will take only two major product of ITI
which has the maximum demand in domestic market so in this context researcher will take E10B,
OCB283/CSN equipment principle features, customer SWOT analysis about E10B equipment.
8/14/2019 COMPLETED PROJECT.docx
45/111
RESPONSIBILITIES OF MARKETING DEPARTMENT
marketing
(purchaseorder)
planningdivision
purchase rawmaterial
inward goodsinspection
(IGI)
manufacturingshop
quality check
division
dispatch of
goods
goodsdelivered
installation ofgoods
8/14/2019 COMPLETED PROJECT.docx
46/111
EXPLANATION OF FLOW DIAGRAM
The flow diagram the represent the whole procedure of marketing department and it shows how
every department interfaced with marketing department. Purchase order comes directly to
marketing department by customer marketing department send this purchase order to the finance
department for. The evolution of its anticipate cost and after costing marketing department send this
P.O> to the planning department where analysis is being made regarding the addition rejection and
anticipated time by which project will be cost addition rejection and lead time. After the planning
department order goes to production product goes to the quality control where quality assurance is
being related to product it any lackness occur in the product shop for rectification to quality control
department it any ship up recure then this product is declared rejected and then the product is
started after total quality assurance final checked product goes to stares and then it goes to shipping
department where final delivered is being made marketing department takes the feedback from all
the activity related to all production and flow up all department till the product delivered to
customer.
8/14/2019 COMPLETED PROJECT.docx
47/111
ORDER COMES THROUGH R.O. [REGIONAL OFFICE]:
When order comes through the regional office even then ITI supplies its product direct to customers
assignment location and payment is being made to the ITI Ltd.
PAYMENT
P.O. P.O.
CUSTOMER ITI
DELIVERY
8/14/2019 COMPLETED PROJECT.docx
48/111
DISTRIBUTION
Distribution Channel of ITI Direct Order In the context of marketing ITI lie is saving zero level
distribution channel. Zero level distribution means there is no mediator between ITI & its customer.
As per as order comes equipment is delivered direct to specific location suggested by customer.
CONSUMER
GOODS ORDER
ITI
DTS Delivery to site/Direct to site:
ITI is having the responsibility to deliver to order its product at specific location as per customer
requirement.
Marketing department of ITI is not only sells its product but also it provide presales and after
sales services.
8/14/2019 COMPLETED PROJECT.docx
49/111
SOME OF THE DOCUMENT USEFUL FOR MARKETING DEPARTMENT OF ITI
Like every department in marketing department too there are many documents are used.
But because of the security reasons I dont get all of them , but some of them, which I got, are:
1. Commercial invoice.
2. Purchase order from any organization (customer).
3. Customer satisfaction index form (filled by customers).
4. Services call report.
8/14/2019 COMPLETED PROJECT.docx
50/111
PERFORMANCE OF MARKETING DEPARTMENT OF ITI LTD. MANKAPUR
Among the various unit of ITI, ITI ltd. Mankapur has its unique place and ITI Mankapur is the most
profitable plant of ITI LTD. it has been constantly giving profit since the inception of the plant. Its is
the heart of ITI LTD. that pumps the blood in the entire ITI.
We will take the performance of marketing department On the basis of total sales. Total export
distribution, promotional activity, manpower and also the production.
We will see the performance not only on the basis of profitability but also its total addition toward
the economy.
In private sector company, the yardstick for the performance not only on the basis of profitability but
in case of public sector units yardstick should not be profitability is low.
So researchers will asses the performance of marketing department not only on the basis of
profitability, but also service toward the economy.
8/14/2019 COMPLETED PROJECT.docx
51/111
FUTURE PLANS OF ITI
ITI is a technology driver customer oriented business enterprise. That is combining its strength in
manufacturing with that its process in turnkey services to provide total solution through
diversification of its portfolio.
So, some of the future plans by which the company can be competitive in the market and can retain
market share are:
Starting business in the production of led lights. Long-term alliance portfolio new products.
Expansion of products portfolio new products.
Its solution like MPLS, internet infrastructure.
Up gradation of technology to meet the market demand.
Reduction of man power & skills building in new business areas by retaining & redevelopment.
Explanation of business portfolio with defense/ railways.
PROMOTION ACTIVITY OF ITI MANKAPUR
ITI is fully geared up to supply equipment and spares. ITI can provide presales services as well as after
sales services first we see pre-sales services as well as after-sale services.
Also pulse of marketing can be judged from the interaction between manufacturer and customer.
8/14/2019 COMPLETED PROJECT.docx
52/111
PRE SALE SERVICES: In pre sales services ITI provides site surveys, exchange dimensioning as
well as sales services like warranty repairs, annual maintenance cataract (A/V/C) technical
assistance and training.
AFTER SALES SERVICES: ITI has its own customer support services & CSS is a business strategy
retain customer, regain customer & increase business strategy retain customer & increasebusiness by exploring the possibility of providing new services.
ITI is using CSS as a strategic tool for achieving customer satisfaction.
ASSEMENT OF OVERALL PERFORMANCE OF MARKETING DEPTT.
TOTAL SALES:- marketing deptt. Has been involving assembling component i.e. hybrid, PCB,
coil & transformer & connectors. In electronic equipment services ITI has E10B exchange with
more sophisticated technology. On account of good reputation in market ITI has very good
marketing.
STRENGTHS OF ITI- THE TELECOM POINEER
Indias first telecom equipment manufacturer.
Total telecom solutions provider
Recognized as Top Turnkey Services Company, for 4 successive years.
Multi-locational state-of-the-electronic assembly & component manufacturing facility
accredited with ISO9000:2000
Multi-locational ISO1400:2004 Environment Management system certified plants.
First Indian company to manufacture BTS & other infra products for GSM/WiMAX and other
new generation products.
Complete range of telecom products, value added services and customized.
Integrated logistic support to a variety of users
Country marketing and customer care centers
Strategic alliances with global telecom /IT majors
Countrywide dedicated network system centers to provide comprehensive network solutions.
8/14/2019 COMPLETED PROJECT.docx
53/111
ITI has a dedicated network system unit for carrying out installation and commissioning of equipment
as well as for undertaking Trunkey jobs and providing value added services. The successful
completion of the mammoth strategic communication network ASCON for the Indian army underlines
ITIs ability in standing up to the challenge of enhancing the reach of communication and information
seamlessly over diverse media.
In a fitting testimony the company continues to hold the numerous position as Indians top telecom
turnkey solution provider.
MANKAPUR SWITCHING : C-DOT
GSM INFRA (BTS)
BANK MECHNISING PRODUCTS
MANPOWER
ITI mankapur has technically competent and highly skilled manpower which is a positive factor for
this company. The workers are totally attached to the company and here high level of commitment
for their work. ITI mankapur marketing department staff strength is very less but existing employees
are highly skilled and it can be watched through the effort made by marketing department.
This unit is the most productive unit of ITI and the most profitable plant so it is the result of its
manpower and theres is a learning habit among the workers and they have setup their mind for any
change and always ready to accept new changes.
HRD department has always been conducted training program for employees as well as for
management.
AS a matter fact manpower is an important assets for any company and the performance of
company obviously depend upon its manpower.
MANPOWER ARE THE ASSETS OF ANY ORGANIZATION
8/14/2019 COMPLETED PROJECT.docx
54/111
INVOLVEMENT OF ITI IN EXTERNAL TRADES
To accomplish higher growth, capacity utilization and to enhance the competitiveness of electronic
component industry a sharp focus open export activity has been envisaged by ELCINA & ITI
participated in many type of activity like trade fair, engineering fair exhibition etc., ITI participated a
number of prestigious exhibitions both in India and abroad there are.
ITI ltd. mankapur equipment is not only reputed in domestic market but also has very good
international market. ITI export is E10B equipments, BTS etc. due to its high quality acceleration of
international standardization (ISO), ITI export is increasing day by day.
Before discussing on the procedure of the export form ITI, let us take an overview on external
trade.
8/14/2019 COMPLETED PROJECT.docx
55/111
EXTERNAL TRADE
INTRODUCTION:
As we know the buying and selling of goods with in a country is called internal trade. But when buying
and selling of goods and services take place between nationals of different countries it is called
external trade or foreign trade.
Every country, big or small, buys and sells different goods from and to other countries. Goods worth
crores of rupees are bought and sold every year. Foreign trade is an important economic activity
because both the countries participating in it benefit in the process. For some countries, external
trade is the most essential economic activity because most of their industrial activity depend on it.
For example economic development of Hong Kong, Singapore, South Korea and Japan has been
possible largely due to their foreign trade. World trade is dominated by the developed countries of
Asia, Africa and Latin America have a small share.
Like other countries, India imports and exports a large number of goods. After independence, foreign
trade of India has considerably expanded. For economic development, it was necessary to import
machinery, raw material and fuel oil. As a result import into India increased. However, it was also
necessary to increase export to pay for the imports. Suitable export promotion measures were
adopted by the Government to increase Indias exports.
8/14/2019 COMPLETED PROJECT.docx
56/111
External trade consist of export trade and import. Export involves sale of goods and services to other
countries. When goods are traded by way of purchases from other countries. When goods are traded
consists of imports exports the transactions are regarded as visible trade. External trade in services is
referred to as invisible trade.
When goods are imported into a country with the purpose of re-exporting them to some other
country, it is known as entrepot trade.
But like every thing trade also have some of its advantages and disadvantages.
ADVANTAGES AND DISADVANTAGES IN EXTERNAL TRADE
ADVANTAGES:
1. AVALIABILITY OF A LARGE OF GOODS: External trade enables a country to avail of the use of a
variety of goods, which cannot be produced in the country can get the benefit of using goods,
which it is not able to produce due to certain natural, physical or other limitations, by
importing them from other countries.
2. EXPROT OF SURPLUS PRODUCTION: External trade facilitate export of surplus of a country
import necessary items. This results in development of largescale industries.
3. SPECIALIZATION BASED ON RESOURSES ENDOWMENT: The quantity and quality resources
available in countries differ on account of climate and geographical formation. External trade
enable each country to specialized in the production of those commodities for which it enjoys
relative advantage. Specialization leads to increase productivity and superior quality of goods.
4. HIGHER STANDARD OF LIVING:It improves the standard of living of people in differentcountries. Exchange of goods and consumption there of leads to higher standard of living of
the people in the world.
5. PRICE EQUALIZATION:External trade leads to equalization of prices of commodities in the
world markets after making allowance for transport and other cost. It bring stability and
uniformity in the prices of commodities in all the countries of the world.
8/14/2019 COMPLETED PROJECT.docx
57/111
6. SECURITY FROM NATURAL CALAMITIES:Natural calamities such as flood, famine, drought
etc., adversely affect the productive capacity of a country. External trade ensures adequate
supply of those commodities, which are in short supply within the country due to such natural
calamities. For instance medicine and food can be imported from countries during an
emergency.
7. INTERNATIONAL RELATIONS: External trade develops business relations among countries of
the world, which facilitate exchange of ideas countries. Leather goods pf Africa, batik art of
Indonesia and brassware of India are known all over the world.
There is always a demand for these goods especially in developed countries. Thus, external
trade promotes cordial relation and understanding among nations of the world.
8. DEVELOPMENT OF TRADE PROMOTING SERVICES: Foreign trade has led to development of
modern means of communication and efficiency in banking and insurance services. These
services have enabled countries to have trade even in voluminous goods like food grains,
wood, coal, and perishable goods, like fruits, flower, vegetables, meat, etc.
8/14/2019 COMPLETED PROJECT.docx
58/111
FUTURE PLAN
Our company is a technology driver customer oriented business enterprise. Which is combing
its core strength in manufacturing with that its process in turnkey services to provide totalsolution through diversification of its portfolio. The strategy adopted by the company to be
competitive in the market & to retain share include.
Laong term alliance with BSNL/MTNL.
Expansion of product portfolio-new product.
Entering into manufacturing of mobile communication equipment like GSM&CDMA WLL
INFRA & terminals.
Its solution like MPLS, internet infrastructure.
Upgradation of technology to meet the market demand.
Reduction of man power & skills building in new business areas by retaining &re-devlopment. Expansion of the business portfolio with defence/railways.
8/14/2019 COMPLETED PROJECT.docx
59/111
8/14/2019 COMPLETED PROJECT.docx
60/111
ITI TODAY
ITI Limited is Indias pioneering venture in the field of telecommunication. Born in 1948, this
premier. PSU has contributed to 50% of the persent national telecomm network. With state-of
the-art manufacturing facitity spread across six location and a countrywide network of
marketing /services outlets, the company ofeers a complete range of telecom products and
total solutions covering the whole spectrum of switching, transmission , access and subscribes
premises equipment. In tune with the technology trend, it has embarked on manufacture of
mobile infrastructure equipment based on GSM (Global System for Mobile) technology. ITI
has also acquired the technology for manufacture broadband infra equipment, NGN (new
Generation Network) equipment based on IP technology and SDH (Synchronous Digital
Hierarchy) products.ITI has a dedicated network system unit for carrying installation and
commissioning of equipment as well as for undertaking turnkey jobs and providing value
added services. The successful completion of the mammoth strategic communication network
ASCON for the Indian army underlines ITIs ability in standing up to the challenge of enhancing
the reach of communication and information seamlessly aver diverse media. In a fitting
testimony, the company continues to hold the numero uno position as Indias top
8/14/2019 COMPLETED PROJECT.docx
61/111
telecomturnkey solution provider. ITI joined the league of world-class vendors of GSM
technology with the inauguration of mobile equipment manufacturing facility at its Mankapur
and Rae bareli plants, which opened a new era of indigenous mobile equipment production in
the country.
These two lines will augment the capacity to more than nine million lines for catering to bothdomestic as well as export markets.
By deploying its rich telecom expertise vast infrastructure, the company is consolidating into
ICT(Information and Communication Technology) space to hone its competitive edge in the
convergence market. Network Management System, Encryption and Networking solutions for
internet connectivity are some of the major initiatives by the company.
MARKETING DEPARTMENT ACTIVITIES
Marketing department of ITI Limited has been including in the marketing equipment like E10B,
OCB/CSN and marketing of component hybrid , PCB, coil and transformers, connector.
The marketing department looks after the activity related to the marketing of switching Equipment
and component for DOT and MINI and non DOT and MTNL etc. customer. Every employee of
marketing department is having a responsibility of ITIs switching equipment and component by any
customer than marketing department than after the planning department order goes to production
department order the planning department than after the planning department receives the P.O. and
send his purchase order the planning the production. Final goods to store and than to shipping andfinally goods and delivered to customer location. Marketing department is also responsibility for the
distribution and promotion of communication equipment and if there is any slackness in ITIs given
product marketing department also provides after sales services. It was just a by and large arrives
about the activate of marketing department researcher will study in deep further.
8/14/2019 COMPLETED PROJECT.docx
62/111
DEPARTMENT PROCEDURE OF MARKETING
STEP1: ON_receipt of order from the R.O. the same shall the received for its adequacy and to
understand the customer requirement.
STEP2: It is torn and condition of the order are acceptable confirmation shall based to R.O. and also
to customer.
STEP3: A communication is also n sent to the production to execude the order.
STEP4: The program made and supply position shall be monitored through production and planning
any anticipated slippage in delivery and parabable delivery schedule shall be communicated to the
customer.
STEP5:Exploring of new market avenue is done by referring of business magazine. Exhibition ,
seminar of directly initiating with probable customer.
8/14/2019 COMPLETED PROJECT.docx
63/111
AUTORITY AND RESPONSIBILTY
The head of marketing has the authority to receive the order and confirm its to acceptation its
satisfaction. He is responsible for marketing function with to non-dot customer and explore new
market avenue to manage and perform the function and maintain the following organization chart.
Responsibility and interfacing department matrix.
FUNCTION OF MARKETING DEPARTMENT
Marketing department of ITI limited mankapur has always been involve in the function of marketing
Ex. Selling, distribution, promotion, the department of these function are depend upon the
performance of marketing department. Marketing department is responsible for selling of ITIs
product.
8/14/2019 COMPLETED PROJECT.docx
64/111
The major production of ITIs E10B which is an exchange and OCB 238 equipment and component is
hybrid , PCB , coil, and transformers and connector. In which most department product is E10B
equipment. ITI product many communication equipment and also other by products which is being
produced named OCB 283/CSN. In the context of selling of these product marketing department is
take care of selling pf communication equipment E10B and also other component. As per as ITIsmarketing department selling function concerted ITI has same specific customer DOT and MTNL and
also non DOT, MTNL customer. Marketing department has the responsibility for marketing of these
product, here researcher will take only two major product of ITI which has the maximum demand in
domestic market so in this context researcher will take E10B OCB 283/CSN equipment principal
feature SWOT analysis about E10B equipment.
DISTRIBUTION:
Distribution by channel of ITI lie is saving zero level distribution means there is no mediator between
ITI & customer. As per order comes equipment is delivered direct to specific location superseded by
customer.
DTS DELIVERED TO SITE/ DIRECT TO SITE :-
ITI is having the responsibility to deliver to order its location as per customer requirement.
Marketing department of ITI is not only sell its product but also provide per sales and after sells
service.
8/14/2019 COMPLETED PROJECT.docx
65/111
ORDER COME THROUGH R.O.(REGIONAL OFFICE):-
When order come through the regional office then ITI suppliers its product direct to customer
assigned location and payment is being made to the ITI limited.
DISTRIBUTION CHANNEL FOR ITI EXPROT :-
In case of export , agent who is appointed by ITI takes order and sent to ITI marketing department
and than final goods export to direct customer location means ITI is having the responsibility to
deliver it product to aboard location.
PROMOTION ACTIVITY OF ITI MANKAPUR :-
ITI is fully to supply E10B equipment and spares. ITI can provide presales services first we see presale
service.
PRE-SALE SERVICE:-
Site survey exchange dimensioning.
AFTER SALES SERVICE:-
Warranty and out of warranty repair annual maintenance contract, technical assistance 7 training.
EXPORT:-
ITI LTD mankapur equipment is not only reputed in domestic market but also has very good
international market. ITI export E10B equipment and due to its high quality and acceleration ofinternational standardization organization. ITI export is increasing day by day.
8/14/2019 COMPLETED PROJECT.docx
66/111
EXPORT PROCEDURE
MARKETING DSEPARTMENT ENG. SER. PLANNING PRODUCTION P.O.
There are three categories of export as per export impact policy
1. Prohibition items.
2. Restricted items.
8/14/2019 COMPLETED PROJECT.docx
67/111
8/14/2019 COMPLETED PROJECT.docx
68/111
DTS (DELIVERY TO SITE ) DIRECT TO SITE:-
ITI is having the responsibility to deliver to order product at specific location as per customers
requirement.
consumer order ITI goods
8/14/2019 COMPLETED PROJECT.docx
69/111
Marketing department of ITI is not only sells its products but also it provide presales and after sales
services .
ORDER COME THROUGH R.O. :-
When order comes through the regional office even then ITI supplies product direct to customersassigned location and payment is being made to the ITI ltd.
DISTRIBUTION CHANNEL FOR EXPORT:-
PAYMENT
P.O
ITIDELIVERY
CUSTOMER
8/14/2019 COMPLETED PROJECT.docx
70/111
In case of export agent who is appointed by ITI takes the order and sent to ITIs marketing
department and then final goods exported customers locations mean ITI is having the responsibility
to deliver it product to abroad customer location.
PAYMENT
P.O. P.O.
CUSTOMER AGENT P.O.
DELIVERY
8/14/2019 COMPLETED PROJECT.docx
71/111
Promotion activity of ITI Mankapur
ITI is fully geared up to the supply equipment and spares. ITI can provide presales services as well as
after sales services first we see presales services.
Pre-sales services: site survey, exchange dimensioning.
After-sales services: warranty and out of warranty repair annual maintenance contact technical &
training.
Activity for Export Production: to accomplish higher growth and better capacity utilization and
to enhance the comptitivence of electronic component industry a sharp focus on expert activity has
been envisaged by ELCINA and also ITI participate in many type of activity like trade fare engineering
fair exhibition.
ITI participate in a number of prestigious exbitions both in India and ad road they are
8/14/2019 COMPLETED PROJECT.docx
72/111
EXPORT:-
ITI ltd mankapur equipment is not only reputed in domestic market is not only reputed in but also has
very good international market.
ITI export equipment and due to its high quality and acceleration of international standardization
organization. ITIs export fig. is increasing day by day.
EXPORT PROCEDURE
WORK ORDER RELEASE
Marketing department engineering & services planning production
P.O
Corporate office Quality Control
P.O.
Abroad Customer Quality Assurance
Delivery of goods Final Good
Negotiation Document Store Product
Bank custom clearance shipping payment receiving
8/14/2019 COMPLETED PROJECT.docx
73/111
Payment receiving
There are three categories of export import policy
1. Prohibition items
2. Restricted items
3. Freely export
ITI exported following policy of free exported. All goods may be exported without any restriction tothe extent such export are regulated by ITC(H.S.).
On account of free export policy of ITI purchase order (P.O.) comes through the corporate office and
then marketing department receive the P.O. and sends this purchase to engineering services for the
releasing of work order and after releasing of work order goes to planning department and then
production shop for sales.
8/14/2019 COMPLETED PROJECT.docx
74/111
PERFORMANCE OF MARKETING DEPARTMENT OF ITI LTD. MANKAPUR:-
Among the various unit of ITI, ITI ltd mankapur has unique place and ITI mankapur is the most
profitable plant of ITI ltd. it has been constantly giving profit since the inception of the plant. It is the
heart of ITI Ltd that pumps the blood in the entire ITI.
We will take the performance of marketing department .on the basis of total sales.
Total export distribution, promotion activity, manpower and also the production.
We will see the performance not only on the basis of profitability but also its total addition toward
the economy.
In private sector company, the yardstick for the performance not only on the basis of profitability but
in case of public sector unit yardstick not be profitability because these unit are started in those
sector in those sectors where profitability is low.
So researcher will asses the performance of marketing department not only the basis of profitability,
but also service toward the company.
8/14/2019 COMPLETED PROJECT.docx
75/111
AFTER SALES SERVICES :-
ITI not only provide after sales services provide pre sale services.
In pre sale services it provide site surveys exchange dimensioning as well as a sale services like
warranty repair, annual maintenance cataract (AMC) technical & training.
Pulse of marketing can be judged from the interaction between manufacture & customer.
ITI has its own customer support services & CSS is a business strategy retain customer, regain
customer & increase business by exploring the possibility of providing new service.
ITI is using CSS as a strategic tool for achieving customer satisfaction.
8/14/2019 COMPLETED PROJECT.docx
76/111
ASSESMENT OF OVERALL PERFORMANCE OF MARKETING DEPTT.:-
TOTAL SALES:- Marketing deptt. Has been involving assembling component i.e. hybrid PCB, coil,
transformer & connectors. In electronic equipment services ITI has E10B exchange with more
sophisticated technology. On account of good reputation in market ITI has very good marketing.
STRENGTH OF ITITHE TELECOM PIONEER:-
Indias first telecom equipment manufacturer.
Total telecom solution provider Recognized as top turnkey services company for 4 successive years.
Multi- locational state-of-the-art electronic assembly & component manufacturing facility
accredited with ISO 900:2000
Multi-locational ISO 14000:2004 Environmental Management System certified plants.
First Indian company to manufacturing BTS & other infra products for GSM/WiMAX and
other new generation products.
Complete range of telecom products, value added services and customized integrated logistic
support to a variety of users.
Countrywide marketing and customer care centers
Strategic alliances with global telecom /IT majors
Country wide dedicated network system centers to provide comprehensive network solutions
8/14/2019 COMPLETED PROJECT.docx
77/111
ITI has dedicated network system unit for carrying installation and commissioning of
equipment as well as for undertaking turnkey jobs and providing value added services. The
successful completion of the mammoth strategic communication network ASCON for the
Indian army underlines ITIsability instanding up to the challenge of enhancing the reach ofcommunication and information seamlessly over diverse media.
In a fitting testimony the company continues to hold the numerous as position as Indians top
telecom turnkey solution provider.
MANKAPUR SWITCHING :C-DOT
GSM INFRA (BTS)
BANK MACHANISING PRODUCTS
MANKAPUR SWITCHING :C-DOT
GSM INFRA(BTS)
BANK MECHANISING PRODUCTS
8/14/2019 COMPLETED PROJECT.docx
78/111
SALES ANALYS :
0 10000 20000 30000 40000 50000 60000
2002-03
2003-04
2004-05
2005-06
2006-07
50000
40000
30000
20000
10000
8/14/2019 COMPLETED PROJECT.docx
79/111
PROFITABILTY:-
YEAR PBT(in cr.) TOTAL INCOME(In cr.) RATIO(PBT to total income)(%)
1996-97 55.78 277.79 20.08
1997-98 84.94 278.58 30.49
1998.99 83.94 324.35 25.61
1999-00 55.10 319.90 27.22
2000-01 8.24 381.86 2.20
2001-02 11.98 479.99 2.50
2002-02 91.49 484.71 -18.88
2003-04 117.94 163.89 -71.962004-05 -127.37 371.34 -34.30
2005-06 -87.22 487.37 -17.89
2006-07 -143.12 565.85 -25.29
8/14/2019 COMPLETED PROJECT.docx
80/111
PRODUCTIVITY OF CAPITAL:-
YEAR TOTAL CAPITAL
EMPLOYED (in cr.)
PBT WITH CASH
AND NON CASH
COST (in cr.)
RETURN ON
CAPITAL w.r.t PBT
WITH ALL CASH
AND NON-CASH
COST
1996-97 360.60 125.37 34.77
1997-98 304.67 134.53 44.16
1998-99 318.18 119.74 37.63
1999-00 335.43 93.67 27.93
2000-01 350.31 46.88 13.93
2001-02 397.53 52.51 13.21
2002-03 414.30 -52.77 -12.74
2003-04 296.00 -82.82 -27.98
2004-05 287.32 -86.83 -30.22
2005-06 314.74 -19.80 -6.29
2006-07 292.14 -83.61 -28.62
2007-08 508.00 -161.41 -31.77
Comment: company has shown negative RY in the current year 2007-08.
8/14/2019 COMPLETED PROJECT.docx
81/111
8/14/2019 COMPLETED PROJECT.docx
82/111
VALUE IN PERCENTAGE:
DIRECT MATERIAL 119.27%
EMPLOYEE COST 29.13%
PROFIT -87.22%
FINACIAL EXPENSES 20.61% PEPRECIATION 3.46%
OTHERS 14.75%
SWOT ANALYSIS
Sales
DITRECT MATERIAL
EMPLOYEE COST
PROFIT
FINANCING EXPENCES
DEPRECIATION
OTHER
8/14/2019 COMPLETED PROJECT.docx
83/111
STRENGTH
Organization name.
Dedicated and devoted employees.
Collaboration with French company.
Niche player in the field of electronic exchange and banking automation in India.
WEAKNESS
ITI has limited customers. No advertisement.
No promotional activities in any level.
Delay in purchase and distribution of goods.
Government rule and regulations.
Less incentive is given to the employees.
8/14/2019 COMPLETED PROJECT.docx
84/111
OPPORTUNITY
It can be grab the whole world market of telecom.
It can enter in other areas of telecom.
Make collaboration with international companies.
THREAT
Several companies have entered into the INVERTOR sector with heavy sales promotional
scheme.
8/14/2019 COMPLETED PROJECT.docx
85/111
RESEARCH OBJECTIVES
To generate demand for telecom product through innovation.
To maintain an overall growth rate of 30% per year. For each existing
Business it should match at least the industry growth rate.
To telecom a strong service provider with major business thrust in
Telecom network and operation and value added services.
To strength technology scanning capacities to benchmark the organizational product/services
against global standards to identity the potential partners.
To achieve global quality standards to identify the potential partners.
To introduce effective production planning and control systems for achieving delivery
schedules, streaming production over the whole year and better inventory controls.
8/14/2019 COMPLETED PROJECT.docx
86/111
RESEARCH METHODOLOG
DEFINITION OF RESEARCH
1. A systematic search for knowledge.
2. Movement from known to unknown.
3. Research in common refers to search for knowledge. One can also define research as a
Scientific and systematic research for pertinent information on specific topics.
It is way to systematically solve the research problem. In it we study various steps that are generally
adopted by a researcher in studying his research problem along with the logic behind them. It is
important for the researcher not only to understand the research methods and techniques but also
the methodology.
Research is a planned and systematic investigation and analysis of factual data to check, verify or
disapprove guesses, clue, assumption. It supplement the existing body of knowledge and widens the
frontiers of understanding.
Edwin. B. Flippo defines research as Systematic and purposive investigation of fact with the objectof determining causes and effect relation among such fact.
8/14/2019 COMPLETED PROJECT.docx
87/111
SIGINIFICANCE OF THE STUDY
This research was done to analysis the marketing division of the company of ITI ltd. It is a descriptive
type of research study.
Sampling design
A sample design is a definite plan for obtaining a sample from a given population. It refers to
the technique or the procedure the researcher would adopt in selecting items for the samples.Samples design is determining before the data are collected.
Sample unit: A design has to be taken concerning a sampling unit before selecting sample.
Sampling unit may be geographical one such a state, village, etc., or a construction unit such
as house, flat, etc., or it may be social unit such as family, club, school, etc., or it may be an
individual. The researcher will have to decide one or more of such units that he has to select
for his study.
Size of sample: this refer to the number of items to be selected from the universe toconstitute a major problem before a researcher; the size of sample should neither be
excessively large, nor too small.It should be optimum. An optimum sample is one which
fulfills the requirement of efficiency, representativeness, reliability and flexibility, while
deciding the size of sample; researcher must determine the desired precision as also an
acceptable confidence level for the estimate. As such, budgetary constraint must invariably be
taken into consideration when decide sample of 100-150 customer.
8/14/2019 COMPLETED PROJECT.docx
88/111
Area selected
The survey was conducted in MANKAPUR GONDA.
DATA COLLECTION:
The method that be used for collecting data was primary data for collecting primary data we used
questionnaire. Through questionnaire found the information and proper feedback about product. But
for some information related with the exact data and problem I had taken help with magazine
internet and other sources.
There are two methods of data collection.
8/14/2019 COMPLETED PROJECT.docx
89/111
Primary Data:-
Primary data can be collected either through experiment or through survey. If the researcher
conducts an experiment, he observes some quantitative measurements, or the data, with the help of
examines the truth contained in his hypothesis. But in the case of survey, data, can be collected by
any one or more of the following ways.
1. By observation2. Through personal interview
3. Through telephone interview
4. By questionnaires:
5. Through schedules:
6. Other method
a. Warranty card
b. Mechanical devices
c. Projective techniquesd. Depth interview
8/14/2019 COMPLETED PROJECT.docx
90/111
Secondary sources:
Secondary data means data that are already available i.e., they refer to the data which have already
been collected and analyzed by someone else. When the researcher utilizes secondary data, then he
has to look into various sources from where he can obtain them.
Secondary data may either be published data or unpublished data. Usually published data are
available in
(a) Various publication of central, states are local governments.
(b)Technical and trade journals
(c) Books, magazines, and newspaper.
(d)Reports and publications of the various association connected with business and industry,
bank stock exchange
8/14/2019 COMPLETED PROJECT.docx
91/111
(e)Public record, and statistic, historical documents and other sources of published information
like website of industry or company.
Data is collected from both the primary and secondary sources
Research Method
The basic type of research are as following:
1. Descriptive vs. analytical: Descriptive research survey and factfinding enquiries of different
kinds. The major purpose of descriptive research is descriptive of the state of affairs as it
exists at present.
In Analytical research on the other hand, the researcher has to use facts or information already
available, and analyze these to make a critical evaluation of the material.
2. Applied vs. fundamental: Applied research aims to finding a solution an immediate problem
facing a society or an industrial/business organization, whereas
Fundamental research is mainly concerned with generalization and with the formulation of a theory.
8/14/2019 COMPLETED PROJECT.docx
92/111
3. Quantitative vs. qualitative: Quantitative research is based on the measurement of
quantitative or amount. It can be term of quantity.
Quantitative research on the other hand, is concerned with quantitative phenomenon, involving
quality or kind for instance investigating for human behavior.
4. Conceptual vs. Empirical: Conceptual research is that related to some abstract idea or theory.
It is generally used by philosopher and thinker to develop new concepts or to reinterpret
existing one.
Empirical research re relies on experience or observation alone, often without due regard for system
and theory. We can it experimental type of research.
I have chosen survey method because of the following advantages:
ADVANTAGES OF SURVEY METHOD:-
1. Survey is conducted in case of descriptive research studies.
2. Survey- type research studies usually have larger samples because the percentage of
responses generally happens to be low, as low as 20% to 30% especially in mailed
questionnaire studies. Thus, the survey method gather data from a relatively large number ofcases at a particular time it is essentially cross- sectional.
3. Survey are concerned with describing, recording , analyzing and interpreting conditions that
either exists or exited. The researches does not manipulate the variable or arrange for events
to happen survey are only concerned with condition or relationship that exists, opinion that
are held, process that are going on, effects that are evident or trends that are developing.
They are primarily as they relate to current conditions. Thus in survey, variables that exist or
have already occurred are selected and observed.
4. Survey is usually appropriate in case of social and behavioral sciences.
5. Survey us an example of field research.6. Survey may either be census or sample survey. They may also be classified as social survey,
economic survey or public surveys.
7. The method of data collection happens to be either observation, or interview or questionnaire
or some projective technique.
8. Possible survey relationships between the data and the unknown in the universe can be
studied through survey.
8/14/2019 COMPLETED PROJECT.docx
93/111
TYPE OF QUESTIONNAIRE :-
Questionnaire can either be structured or unstructured form.
Structured questionnaire :-In which there are definite, concrete and pre-determined question. The
questions are presented with exactly that same wording and the same order to all respondents.
SAMPLING
The sampling technique used, was random sampling technique as were universe is quite large
relatively small group was selected which able to represent the whole universe.
SAMPLE SIZE
Sample size limited to 30 respondents
8/14/2019 COMPLETED PROJECT.docx
94/111
FACTS AND FINDINGS:-
After undergoing summer training in ITI ltd , I got a lot of knowledge and practical experience and
also I came across some problems and their cause which are as follows:
PROBLEMS:-
Company takes a lots of time for dispatching the goods.
Limited exports.
Company doesnt posses a proper budgeting andmonitoring system.
Trading has increased whereas manufacturing has decreased which resulted in decrease in
contribution. Which to fixed assets, the company has to incur losses.
CAUSES:-
8/14/2019 COMPLETED PROJECT.docx
95/111
Lack of proper management of inventory i.e. inventory lag period is high.
Lack of proper distribution network.
Low efficient work force.
Lack of proper sales promotional schemes and advertisement.
Obsolete technology. Fierce competition with global market.
Intervention of government policies and norms.
Company does not possess proper strategies, proper budgeting & monitoring system.
Finding -1
Are you using any inventory in your home ?
8/14/2019 COMPLETED PROJECT.docx
96/111
Above graph show that 85% of the people in mankapur are using inverter in their home and
only 15% people are not using any inverter.
Finding -2
USING THE INVENTORY
NO
YES
8/14/2019 COMPLETED PROJECT.docx
97/111
Which company INVERTOR YOU ARE USING ?
Above graph show that 60% user are using ITI ltd inverter, 10% customer are using SUKAM
COMPANY, 25% customer uses LUMINOUS and 5% POWER LINE.
Sales
ITI
SUKAM
LUMINOUS
POWER LINE
8/14/2019 COMPLETED PROJECT.docx
98/111
Finding -3
Do you know difference between normal and branded inverter?
Above graph show only 63% people know difference between the normal and branded
inverter.
COLUMN 1
NORMAL INVETOR
BRANDED INVERTOR
8/14/2019 COMPLETED PROJECT.docx
99/111
FINDING -4
ARE YOU AWARE ABOUT THE NAME OF ITI LTD. INVERTER.
Above graph that near about 95% respondent are aware about the name of ITI ltd.
mankapur.
Sales
AWARE
NOT AWARE
8/14/2019 COMPLETED PROJECT.docx
100/111
FINDING -5
Are you aware about technology used in ITI ltd. mankapur ?
Above graph show that in mankapur 65% respondents are know about the technology used by ITIltd. & 35% do not know that.
Sales
yes
no
8/14/2019 COMPLETED PROJECT.docx
101/111
FINDING-6
DO YOU THINK ITI LTD. INVERTER IS THE PERFECT?
ABOVE GRAPH SHOW THAT 92% USER ARE SATISFIED WITH THE ITI LTD INVERTER SO THEY
THINK THE ITI LTD. IS PERFECT OPTION AS INVERTER WHILE 8% THINK THAT THIS IS NOT.
Sales
SATISFIED
UNSATISFIED
8/14/2019 COMPLETED PROJECT.docx
102/111
FINDING-7
ARE YOU SATISFIED WITH THE AFTER SALES SERVICES IF THE ITI LTD. INVERTER?
ABOVE GRAPH SHOW THAT 85% RESPONDENT ARE HAPPY & FULLY SATISFIED WITH AFTER
SALES SERVICES OF THE ITI LTD. , ONLY 15% RESPONDENTS HAVE SOME PROBLEM.
Sales
HAPPY
UNHAPPY
8/14/2019 COMPLETED PROJECT.docx
103/111
FINDING-9
ARE YOU HAPPY WITH THE BRAND PROMOTION OF THE COMPANY?
Above graph show that mostly respondents happy with the brand promotion of company.
Sales
HAPPY
UNHAPPY
8/14/2019 COMPLETED PROJECT.docx
104/111
FINDING-10
WHAT COULD BE YOUR REMARK FOR ITI LTD INVERTER?
Above graph show that 40% respondent fare that iti ltd. inverter have excellent work & 30% say
that its working good & 25% remark its good while 5% say that iti ltd inverter doing fair job .
Sales
EXCELLENT
VERY GOOD
GOOD
FAIR
8/14/2019 COMPLETED PROJECT.docx
105/111
FINDING-11
ARE YOU SATISFIED WITH THE PRICE?
Above graph show that 60% people are satisfied with the price of iti ltd. mankapur inverter.
Sales
SATISFIED
DISSATISFIED
8/14/2019 COMPLETED PROJECT.docx
106/111
Questionnaire for customers
Name:-
Address:-
Contact no.:-
Occupation:-
1. Are you using any inventory in your home ?
A) yes