Upload
phamminh
View
220
Download
0
Embed Size (px)
Citation preview
L E D M A C H I N E L I G H T S E R I E S
C O M P L E T E R A N G E2 0 1 6
LED industrial, machine and signal lighting
■■ Designed for heavy industrial use
■■ Easy electrical installation
■■ Assembly-friendly, robust design
■■ Compact, space-saving solutions
■■ High protection classes
■■ Long service life
■■ High degree of energy efficiency
Introduction
Rapid technical developments in the LED sector and numerous technological advantages have, at least in the area of machinery
and workplace lighting, led many to consider changing from conventional lighting systems to solutions involving LED.
An important reason which makes LED technology attractive is the reduction of the total cost of ownership. When compared
to conventional lighting systems, the use of light-emitting diodes is, on the whole, more cost-effective, due to the longer service
life, minimal maintenance costs and lower energy consumption involved. Moreover, an increase in robustness (resistance to
impacting and vibration) and an improvement in lighting can be achieved, even where confined spaces are involved, as LED
systems are compact in their design. Further advantages include an increase in safety, as the complete brightness is immediately
available. The burning in of coolants and lubricants is also no longer a problem, due to the low level of heat development.
In addition, only protective low voltage is required in the machine room, thanks to the simple integration of 24 V DC operat-
ing voltage in the machinery environment. Our LED lights can be dimmed easily and (almost) without power using a separate
signal cable and PWM signal, enabling the achievement of ergonomically adapted lighting conditions.
We offer you the support you need to provide your customers with both the latest and most reliable technical products.
Our products are therefore distinguished by continuous technical innovations. Consequently, technical changes are possible
at all times.
C O M P L E T E R A N G E
Contents
LED machine light series ML-x-Spot adjustable with slot nuts M6 ................................................................................................................................... Page 2
LED machine light series ML-5-x / ML-10-x with flexible metal hose 210 mm or 450 mm .......................................................................................................... Page 3
LED machine light series ML-x for wall mounting, 90° light source direction .......................................................................................................... Page 4
LED machine light series ML-x-45 for corner mounting, 45° light source direction ...................................................................................................... Page 6
LED machine light series ML-x-20 mounting with integrated dimming, 20° light source direction ............................................................................... Page 8
LED machine light series ML-x-UF flat design............................................................................................................................................................. Page 10
LED machine light series WML-x-UF flat design............................................................................................................................................................. Page 12
LED machine light series ML-x-P / WML-x-P rotatable, fine prismatic glare control .................................................................................................................... Page 14
LED machine light series ML-x-LK / ML-x-LKF slim and low price ................................................................................................................................................. Page 16
LED machine light series ML-3-F / ML-3-R miniature LED lamp .............................................................................................................................................. Page 18
LED signal spot series SL-5-R / G compact design, with slot nuts ............................................................................................................................. Page 19
LED signal light series SL-x-LKF / SL-x-F slim design, different light colours ........................................................................................................................ Page 20
LED signal light series SL-x-F AMPEL 3-coloured, flat signal lights with high protection degree ...................................................................................... Page 22
LED signal light series SL-x-TRIO 4-colored lean signal lights for universal applications ............................................................................................ Page 24
LED workplace and machine light series AL-x System profile housing, dimmable, fine prismatic glare control ............................................................................. Page 26
LED workplace and machine light series AL-x-AC System profile housing, dimmable, fine prismatic glare control ............................................................................. Page 28
LED workplace light AL-9-SV / BK dimmable, flexible metal hose ............................................................................................................................... Page 30
LED workplace light IL-6 dimmable, with flexible metal hose 650 mm ......................................................................................................... Seite 31
Accessories ........................................................................................................................................................... Page 32
Information – Necessary density of light ............................................................................................................... Page 34
2
The LED Spot Lights ML-x-Spot allow with low size and robust
design a spot-like illumination in harsh industrial environments.
With fully encapsulated electronics unit and an impact resistant
windshield the LED spots are protected from influences in industrial
environments.
By using a system profile housing with the types ML-5 and ML-10
Spot-Spot a easy and flexible installation with slot nuts is possible.
The spot lights have a beam angle of 20° and radiate a directional
homogeneous and flicker-free light in daylight quality to an object.
Because the optical focusing, the working distance can be increased,
so that the lights do not restrict the working space. With the flexible
metal hose (types ML-5-x and ML-10-x) the light cone can be aligned
accurately.
Type Power con sump tion
(A)
Illuminance (lux) 1 m
Weight (gram)
Art. Nr.
ML-5-Spot 0,2 700 350 10604
ML-10-Spot 0,4 2100 450 10605
ML-5-250 0,2 700 850 10235
ML-5-450 0,2 700 950 10236
ML-10-250 0,4 2100 1000 10237
ML-10-450 0,4 2100 1100 10238
L E D M A C H I N E L I G H T S E R I E S M L - x - S P O T / M L - 5 - x / M L - 1 0 - x
series ML-x-Spot
series ML-x-Spot
46.4
R26.4 115/155
3
Technical data
■■ Power supply 16-30 V DC
■■ Connection with M12 connector system
■■ Flexible metal hose, 250 mm or 450 mm (ML-x-250, ML-x-450)
■■ Montage with slot nuts (slot nuts M6 enclosed) (ML-x-Spot)
■■ Remote control and dimming with 24 V switching signal (PWM)
■■ Robust anodised aluminium housing
■■ Resistant to impacting and vibration
■■ Impact resistant polycarbonat front lens
■■ Integrated overvoltage and temperature protection
■■ Colour temperature 5700 K
■■ Protection class IP 65, Protection class 3
ML-5-250 ML-5-450
ML-10-250 ML-10-450
Brightness
0 1 m 2 m
40 cm
80 cm
Light cone diameter
Distance
700 lux
2100 lux
160 lux 520 lux
Optional:
Magnet holder AL-6-M, table clamp ML-KL, power supply SN-12-M12
Look at Accessories page 32
series ML-x-250 / ML-x-450
L E D M A C H I N E L I G H T S E R I E S L E D - x - S P O T / M L - 5 - x / M L - 1 0 - x
4
L E D M A C H I N E L I G H T S E R I E S M L - x
The ML-x machine light series is a superior-quality 24 V LED
lighting solution for sophisticated industrial applications.
A thermally optimised LED electronic unit is cooled in a 40 mm
aluminium profile housing, ensuring a long service life. Embedding
the electronics in a transparent UV-resistant PUR casting protects
the machine lights against environmental influences, moisture and
numerous chemicals (lyes, acids and oil).
This machine light design enables simple wall mounting with a
glare-free light emission parallel to the mounting surface. The moun-
ting angle kit ML-W2 (see accessories), with offset holes, enables
the realisation of flush mounting on 40 mm profile systems.
Wall mounting
Type Power con sump-tion (mA)
Luminous flux
(lumen)
Illumi-nance (lux) 1 m
Dimensions L x B x H
(mm)
Weight (gram)
Connection Art. Nr.
ML-6 270 ~ 700 230 200 x 40 x 40 320 M12 plug 10207
ML-6 LC 270 ~ 700 230 200 x 40 x 40 480 5 m PUR / PVC 10275
ML-12 540 ~ 1400 460 370 x 40 x 40 550 M12 plug 10206
ML-12 LC 540 ~ 1400 460 370 x 40 x 40 700 5 m PUR / PVC 10264
ML-18 800 ~ 2100 600 540 x 40 x 40 770 M12 plug 10213
ML-18 LC 800 ~ 2100 600 540 x 40 x 40 900 5 m PUR / PVC 10265
ML-24 1100 ~ 2800 900 540 x 40 x 40 770 M12 plug 10247
ML-24 LC 1100 ~ 2800 900 540 x 40 x 40 900 5 m PUR / PVC 10269
series ML-x
5
Technical data
■■ Power supply 21-27 V DC
■■ Connection with M12 connector system / 250 mm PUR / PVC cabel or 5 m PUR / PVC cabel with open end
■■ Remote control with 24 V signal
■■ Dimming with PWM signal
■■ Resistant to shock or vibration
■■ Compact, robust design
■■ Robust aluminium housing
■■ Integrated overvoltage and temperature protection
■■ Adjustable slot nuts M6
■■ Flicker-free illumination in daylight quality, colour temperature 5700 K
■■ Protection class IP 68, Protection class 3
Optional:
Magnet holder ML-M-90, mounting angle kit ML-W2,
power supply SN-12-M12 / SN-24-M12
Look at Accessories page 32
series ML-x
L E D M A C H I N E L I G H T S E R I E S M L - x
6
series ML-x-45
Type Power con sump-tion (mA)
Luminous flux
(lumen)
Illumi-nance (lux) 1 m
Dimensions L x B x H
(mm)
Weight (gram)
Connection Art. Nr.
ML-6-45 270 ~ 700 230 200 x 40 x 40 310 M12 plug 10204
ML-6-45 LC 270 ~ 700 230 200 x 40 x 40 470 5 m PUR / PVC 10276
ML-12-45 540 ~ 1400 460 370 x 40 x 40 570 M12 plug 10205
ML-12-45 LC 540 ~ 1400 460 370 x 40 x 40 730 5 m PUR / PVC 10263
ML-18-45 800 ~ 2100 600 540 x 40 x 40 850 M12 plug 10214
ML-18-45 LC 800 ~ 2100 600 540 x 40 x 40 1000 5 m PUR / PVC 10266
ML-24-45 1100 ~ 2800 900 540 x 40 x 40 860 M12 plug 10250
ML-24-45 LC 1100 ~ 2800 900 540 x 40 x 40 1050 5 m PUR / PVC 10270
ML-36-45 1600 ~ 3500 1100 800 x 40 x 40 1200 M12 plug 10292
ML-36-45 LC 1600 ~ 3500 1100 800 x 40 x 40 1350 5 m PUR / PVC 10498
L E D M A C H I N E L I G H T S E R I E S M L - x - 4 5
The ML-x-45 machine light series is a superior-quality 24 V LED
lighting solution for sophisticated industrial applications.
A thermally optimised LED electronic unit is cooled in a 40 mm
aluminium profile housing, ensuring a long service life.
Embedding the electronics in a transparent UV-resistant PUR cast-
ing protects the machine lights against environmental influences,
moisture and numerous chemicals (lyes, acids and oil).
This LED machine light series is ideally suitable for space-saving
and glare-free corner mounting. The mounting angle kit ML-W1
(see accessories), with offset holes, enables the realisation of flush
mounting on 40 mm profile systems.
System profile housing 45°
7
L E D M A C H I N E L I G H T S E R I E S M L - x - 4 5
Technical data
■■ Power supply 21-27 V DC
■■ Connection with M12 connector system / 250 mm PUR / PVC cabel or 5 m PUR / PVC cabel with open end
■■ Remote control with 24 V signal
■■ Dimming with PWM signal
■■ Resistant to shock or vibration
■■ Compact, robust design
■■ Robust aluminium housing
■■ Integrated overvoltage and temperature protection
■■ 2 x slot nuts M6 are included
■■ Flicker-free illumination in daylight quality, colour temperature 5700 K
■■ Protection class IP 68, Protection class 3
200/370/540/800
40
40
Optional:
Magnet holder ML-M-45, mounting angle kit ML-W1,
power supply SN-12-M12 / SN-24-M12
Look at Accessories page 32
series ML-x-45
8
series ML-x-20
Type Power con sump-tion (mA)
Luminous flux
(lumen)
Illumi-nance (lux) 1 m
Dimensions L x B x H
(mm)
Weight (gram)
Connection Art. Nr.
ML-6-20 270 ~ 700 230 200 x 40 x 15 260 M12 plug 10221
ML-6-20 LC 270 ~ 700 230 200 x 40 x 15 420 5 m PUR / PVC 10262
ML-12-20 540 ~ 1400 460 370 x 40 x 15 460 M12 plug 10219
ML-12-20 LC 540 ~ 1400 460 370 x 40 x 15 620 5 m PUR / PVC 10226
ML-18-20 800 ~ 2100 600 540 x 40 x 15 660 M12 plug 10220
ML-18-20 LC 800 ~ 2100 600 540 x 40 x 15 820 5 m PUR / PVC 10260
ML-24-20 1100 ~ 2800 900 540 x 40 x 15 680 M12 plug 10251
ML-24-20 LC 1100 ~ 2800 900 540 x 40 x 15 840 5 m PUR / PVC 10261
ML-36-20 1600 ~ 3500 1100 800 x 40 x 15 1000 M12 plug 10294
ML-36-20 LC 1600 ~ 3500 1100 800 x 40 x 15 1150 5 m PUR / PVC 10639
L E D M A C H I N E L I G H T S E R I E S M L - x - 2 0
The ML-x-20 machine light series is a high-quality 24 V LED
lighting solution for sophisticated industrial applications. The inte -
grated, inclined LED module enables ceiling mounting with LED
integrated glare control, or dimmed peripheral illumination can be
achieved with wall mountings.
A thermally optimised LED electronic unit is cooled in a 40 mm
aluminium profile housing, ensuring a long service life.
Embedding the electronics in a transparent UV-resistant PUR
cas ting protects the machine lights against environmental influences,
moisture and numerous chemicals (lyes, acids and oil).
Inte grated cut-off angle
9
Technical data
■■ Power supply 21-27 V DC
■■ Integrated cut-off angle 20°
■■ Connection with M12 connector system / 250 mm PUR / PVC cabel or 5 m PUR / PVC cabel with open end
■■ Lateral or rear cable outlet
■■ Remote control with 24 V signal
■■ Dimming with PWM signal
■■ Resistant to shock or vibration
■■ Compact, robust and flat design
■■ Flat aluminium housing
■■ Fixing with 2 x hexagonal socket head screws M6 / DIN 912
■■ Integrated overvoltage and temperature protection
■■ Flicker-free illumination in daylight quality, colour temperature 5700 K
■■ Protection class IP 68, Protection class 3
Optional:
Magnet holder ML-M-20, power supply SN-12-M12 / SN-24-M12
Look at Accessories page 32
series ML-x-20
L E D M A C H I N E L I G H T S E R I E S M L - x - 2 0
184/354/524/780
200/370/540/800
40
15
33
10
series ML-x-UF
The ML-x-UF machine light series is a superior-quality 24 V LED
lighting solution for sophisticated industrial applications.
A thermally optimised LED electronic unit is cooled in a 40 mm
aluminium profile housing, ensuring a long service life. Embedding
the electronics in a transparent UV-resistant PUR casting protects
the machine lights against environmental influences, moisture and
numerous chemicals (lyes, acids and oil).
This series are especially suitable due to the low height of 10 mm
for applications with limited space.
Flat design
L E D M A C H I N E L I G H T S E R I E S M L - x - U F
Type Power con sump-tion (mA)
Luminous flux
(lumen)
Illumi-nance (lux) 1 m
Dimensions L x B x H
(mm)
Weight (gram)
Connection Art. Nr.
ML-6-UF 270 ~ 700 230 200 x 40 x 10 180 M12 plug 10232
ML-6-UF LC 270 ~ 700 230 200 x 40 x 10 340 5 m PUR / PVC 10259
ML-12-UF 540 ~ 1400 460 370 x 40 x 10 280 M12 plug 10233
ML-12-UF LC 540 ~ 1400 460 370 x 40 x 10 440 5 m PUR / PVC 10258
ML-18-UF 800 ~ 2100 600 540 x 40 x 10 430 M12 plug 10234
ML-18-UF LC 800 ~ 2100 600 540 x 40 x 10 590 5 m PUR / PVC 10268
ML-24-UF 1100 ~ 2800 900 540 x 40 x 10 430 M12 plug 10249
ML-24-UF LC 1100 ~ 2800 900 540 x 40 x 10 590 5 m PUR / PVC 10272
ML-36-UF 1600 ~ 3500 1100 800 x 40 x 10 600 M12 plug 10293
ML-36-UF LC 1600 ~ 3500 1100 800 x 40 x 10 750 5 m PUR / PVC 10580
11
L E D M A C H I N E L I G H T S E R I E S M L - x - U F
Technical data
■■ Power supply 21-27 V DC
■■ Connection with M12 connector system / 250 mm PUR / PVC cabel or 5 m PUR / PVC cabel with open end
■■ Powerless remote control with 24 V signal
■■ Dimming with PWM signal
■■ Resistant to shock or vibration
■■ Compact, robust and particularly flat design
■■ Robust aluminium housing
■■ Fixing with 2 x hexagonal socket head screws M6 / DIN 912
■■ Integrated overvoltage and temperature protection
■■ Flicker-free illumination in daylight quality, colour temperature 5700 K
■■ Protection class IP 68, Protection class 3
Optional:
Magnet holder ML-M-UF, rotary attachment WML-D,
power supply SN-12-M12 / SN-24-M12
Look at Accessories page 32
series ML-x-UF
186/356/526/780
200/370/540/800
30
29.5
10
12
series WML-x-UF
L E D M A C H I N E L I G H T S E R I E S W M L - x - U F
Type Power con sump-tion (mA)
Luminous flux
(lumen)
Illumi-nance (lux) 1 m
Dimensions L x B x H
(mm)
Weight (gram)
Connection Art. Nr.
WML-6-UF 270 ~ 700 230 200 x 42,2 x 11 270 M12 plug 10296
WML-6-UF LC 270 ~ 700 230 200 x 42,2 x 11 400 5 m PUR / PVC 10300
WML-12-UF 540 ~ 1400 460 370 x 42,2 x 11 480 M12 plug 10287
WML-12-UF LC 540 ~ 1400 460 370 x 42,2 x 11 620 5 m PUR / PVC 10299
WML-18-UF 800 ~ 2100 600 540 x 42,2 x 11 680 M12 plug 10283
WML-18-UF LC 800 ~ 2100 600 540 x 42,2 x 11 820 5 m PUR / PVC 10288
WML-24-UF 1100 ~ 2800 900 540 x 42,2 x 11 680 M12 plug 10284
WML-24-UF LC 1100 ~ 2800 900 540 x 42,2 x 11 820 5 m PUR / PVC 10289
WML-36-UF 1600 ~ 3500 1100 800 x 42,2 x 11 960 M12 plug 10295
WML-36-UF LC 1600 ~ 3500 1100 800 x 42,2 x 11 1100 5 m PUR / PVC 10301
The machine tool lights series WML-x-UF allows illumination with
compact dimensions an easy integration into machines and cutting
machines without significantly restricting the space.
The robust aluminum housing with stainless steel protection plate
and a thermally hardened glass front protects the lamp against a
lot of chemicals such as alkalis, acids and oils and hot chippings in
machine tools. The lights are completely casted with a transparent
PUR encapsulation which prevents infiltration of oil or other liquids.
The LED-lamps generates an flickerfree illumination in daylight
quality with an beam angle 110°.
The LED-lamp series WML-x-UF is available in five power sizes
types. The electrical installation can plugged with M12 connector
or with 5 m PUR / PVC cable with open end. These lights with the
flat construction are particularly suitable for space-saving
applications.
13
L E D M A C H I N E L I G H T S E R I E S W M L - x - U F
Technical data
■■ Power supply 21-27 V DC
■■ Connection with M12 connector system / 250 mm PUR / PVC cabel or 5 m PUR / PVC cabel with open end
■■ Remote control and dimming with switching signal (PWM)
■■ Resistant to impacting or vibration
■■ Thermally hardened glass front
■■ Robust aluminum housing with stainless steel protection plate
■■ Completely casted with a transparent PUR encapsulation
■■ Integrated overvoltage and temperature protection
■■ Compact, particularly flat design
■■ Flicker-free illumination in daylight quality, colour temperature 5700 K
■■ Max. ambient temperature 50° C
■■ Protection class IP 69 K (DIN 40050-9:1993), Protection class 3
Optional:
Rotary attachment WML-D, power supply SN-12-M12 / SN-24-M12
Look at Accessories page 32
200/370/540/800
42.2
186/356/526/780
30
11
6
series WML-x-UF
14
Type Power con sump-tion (A)
Luminous flux
approx. (lumen)
Illumi-nance
(lux) 1 m
Dimensions L x B x H
(mm)
Weight (gram)
Connection Art. Nr.
ML-7-P 0,3 800 220 190 x 40 x 40 300 M12 plug 10598
ML-14-P 0,6 1600 450 300 x 40 x 40 600 M12 plug 10599
ML-28-P 1,2 3200 880 520 x 40 x 40 1000 M12 plug 10600
ML-56-P 2,4 6400 1350 970 x 40 x 40 1750 M12 plug 10601
WML-7-P 0,3 800 220 190 x 40 x 40 400 M12 plug 10640
WML-14-P 0,6 1600 450 300 x 40 x 40 800 M12 plug 10641
WML-28-P 1,2 3200 880 520 x 40 x 40 1200 M12 plug 10642
WML-56-P 2,4 6400 1350 970 x 40 x 40 2000 M12 plug 10643
L E D M A C H I N E L I G H T S E R I E S M L - x - P / W M L - x - P
The LED machine light series ML-x-P / WML-x-P allows with
very compact dimensions easy and spaces saving integration in
signi ficantly restricting machines or tooling machines. With M12
plug connector systems a simple electrical installation directly
to 24 V DC is possible.
With a rotatable and robust aluminum housing, the impact-
resistant polycarbonate windscreen (ML-X-P) or thermally hardened
safety glass (WML x-P), the LED light is protected against mechanical
environmental influences and numerous chemicals as alkalis, acids
and oils.
The highly efficient LED – in combination with the fine prismatic
glare control – produce a wide beam angle of 100° and a flicker-
free light in the usual daylight quality.
The series ML-x-P and WML-x-P are each in four power-sizes avail-
able. The series WML-x-P is designed for the machine tool industry
and has a stainless steel front protection and a thermally hardened
safety glass optics.
series ML-x-P/WML-x-P
Optional:
Foot plate set ML-x-P, there are two sets per light required
Look at Accessories page 32
15
L E D M A C H I N E L I G H T S E R I E S M L - x - P / W M L - x - P
Technical data
■■ Power supply 21,5-27 V DC
■■ Connection with M12 connector system
■■ Remote control and dimming with switching signal (PWM)
■■ Robust, rotatable aluminium housing
■■ Fine prismatic front glass for glare suppression
■■ Impact resistant polycarbonat front lens (ML-x-P)
■■ Thermally hardened safety glass front lens stainless steel front protection (WML-x-P)
■■ Integrated overvoltage and temperature protection
■■ Max. ambient temperature 50° C
■■ Colour temperature 5700 K, Beam angle 100°, Ra > 80
■■ Protection class IP 67, Protection class 3
series ML-x-P / WML-x-P
mit Fussblechset
series ML-x-P / WML-x-P
ohne Fussblechset
190/300/520/970
19 40
175/285/505/955
40
4x M6 20 tief
190/300/520/970
206.5/316.5/536.5/986.5
220/330/550/1000
22 40
16
series ML-x-LK series ML-x-LKF
Type Power con sump-tion (mA)
Luminous flux
approx. (lumen)
Illumi-nance
(lux) 1 m
Dimensionshousing (mm)
Weight (gram)/M12
Art. Nr.
ML-3-LK/ML-3-LKM12 135 350 100 D20 x 160 200/100 10241/10278
ML-3-LKF/ML-3-LKFM12 135 350 100 20 x 15 x 150 200/100 10303/10645
ML-6-LK/ML-6-LKM12 270 700 200 D20 x 260 280/160 10240/10279
ML-6-LKF/ML-6-LKFM12 270 700 200 20 x 15 x 250 280/180 10304/10545
ML-9-LK/ML-9-LKM12 400 1050 300 D20 x 360 300/200 10242/10280
ML-9-LKF/ML-9-LKFM12 400 1050 300 20 x 15 x 350 320/220 10305/10527
ML-12-LK/ML-12-LKM12 540 1400 380 D20 x 460 340/240 10243/10281
ML-12-LKF/ML-12-LKFM12 540 1400 380 20 x 15 x 450 380/280 10302/10644
ML-15-LK/ML-15-LKM12 675 1750 470 D20 x 560 380/280 10244/10282
ML-15-LKF/ML-15-LKFM12 675 1750 470 20 x 15 x 550 460/360 10306/10528
L E D M A C H I N E L I G H T S E R I E S M L - x - L K / M L - x - L K F
The LED lights series ML-x-LK and ML-x-LKF allows illumination
with slim dimensions easy integration into machines or electrical
cabinets without significantly restricting the space. A simple
electrical installation directly to 24 V is implemented 3 m PVC / PVC
cable or with M12-connector.
The 360° rotatable and robust aluminum housing of the series
ML-x-LK allows for flexible orientation of lighting. The boltable
aluminum housing with M6 allen screws of the series ML-x-LKF
enables easy installation in industrial environment.
Both series need a DC power supply from 21 to 27 V.
The maximum ambient operating temperature is 50° C.
NEW
17
L E D M A C H I N E L I G H T S E R I E S M L - x - L K / M L - x - L K F
Technical data
■■ Power supply 21-27 V DC
■■ Resistant to shock or vibration
■■ Remote control and dimming with switching signal (PWM)
■■ Robust aluminium housing
■■ Integrated overvoltage and temperature protection
■■ 360° rotatable, Slim round housing (Serie ML-x-LK)
■■ Robust, Slim and boltable aluminium housing (Serie ML-x-LKF)
■■ Flicker-free illumination in daylight quality, colour temperature 5700 K
■■ Polycarbonat front lens
■■ Protection class IP 62, Protection class 3
150/250/350/450/550
15
130/230/330/430/530
2016
160/260/360/460/560
29.6
140/240/340/440/540
30.2
23
4.2
20
series ML-x-LK
series ML-x-LKF
18
ML-3-F
ML-3-R
L E D M I N I A T U R E L I G H T S E R I E S M L - 3 - F / M L - 3 - R
A thermally optimised LED electronic unit is cooled by a 40 mm
aluminium housing, ensuring a long service life. Embedding the
electronics in a transparent UV-resistant PUR casting protects the
maschine lights against environmental influences, moisture and
numberous chemicals (lyes, acids and oil).
Type Power con sum p-tion (mA)
Luminous flux
(lumen)
Illumi-nance
(lux) 1 m
Dimensions L x B x H
(mm)
Weight (gram)
Connection Art. Nr.
ML-3-F 150 350 100 105 x 30 x 8 55 M12 Stecker 10227
ML-3-F LC 150 350 100 105 x 30 x 8 150 3 m PVC / PVC 10273
ML-3-R 150 350 100 56 x 21 60 M12 Stecker 10229
ML-3-R LC 150 350 100 56 x 21 155 3 m PVC / PVC 10274
Technical data
■■ Power supply 21-27 V DC
■■ Connection with M12 connector system / 250 mm PUR / PVC cabel or 3 m PUR / PVC cabel (LC design)
■■ Remote control and dimming with 24 V switching signal (PWM)
■■ Resistant to shock or vibration
■■ Compact, robust and flat design
■■ Robust aluminium housing, black, anodised
■■ Fixing with 2 x allen screws M4 / DIN 912
■■ Integrated overvoltage and temperature protection
■■ Flicker-free illumination in daylight quality, colour temperature 5700 K
■■ Protection class IP 68
19
SL-5-R / G
L E D S I G N A L S P O T S E R I E S S L - 5 - R / G
The LED signal spots SL-5-R / G points an object with a signal
colour red or green.
LED signal spots allow selective illumination in harsh industrial
environments with compact dimensions and robust construction.
A fully encapsulated electronics unit and an impact resistant
polycarbonate front optic protects the lamp. The signal-spots
reaches the protection-class IP65.
The use of a system profile housing allows easy and flexible
installation.
Technical data
■■ Power supply 12-30 V DC
■■ Robust aluminium housing with slot nuts M6 (nut 8)
■■ Connection with M12 connector system
■■ Remote control and dimming with 24 V switching signal (PWM)
■■ Integrated overvoltage and temperature protection
■■ Protection class IP 65, Protection class 3
46.4
R26.4 115
0 1 m 2 m
20 cm
40 cm
Light cone diameter
Distance
Type Power con sumption (A) / at 24 V
Weight (gram)
Colour Art. Nr.
SL-5-R 0,2 350 10610
SL-5-G 0,2 350 10611
20
series SL-x-LKF
series SL-x-F
Type Power con sumption
(mA)
Dimensions L x B x H
(mm)
Weight (gram)
Colour Art. Nr.
SL-1-LKF R / G / B 60 150 x 20 x 15 200 10612 / 10613 / 10614
SL-1-LKF RG / RB 40 / 20 150 x 20 x 15 200 10615 / 10616
SL-2-LKF R / G / B 120 250 x 20 x 15 280 10617 / 10618 / 10619
SL-3-LKF R / G / B 180 350 x 20 x 15 340 10620 / 10621 / 10622
SL-4-LKF R / G / B 240 450 x 20 x 15 400 10623 / 10624 / 10625
SL-5-LKF R / G / B 300 550 x 20 x 15 460 10626 / 10627 / 10628
SL-3-F R / G / B 130 105 x 30 x 8 140 10629 / 10630 / 10631
SL-3-F RG / RB 60 / 80 105 x 30 x 8 140 10632 / 10633
L E D S I G N A L L I G H T S E R I E S S L - x - L K F / S L - x - F
LED signal lamps of the series SL-x-LKF and SL-x-F can, because
of the compact dimensions, be positioned very close to an object.
The signal message is thus easier to locate. With fully encapsulated
electronics unit and an impact resistant windshield the LED spots
are protected from influences in industrial environments.
For example, the series SL-x-F can be mounted directly within
a machine cell, so that the complete machine cell lights in the
respective signal colour.
/ /
/
/ /
/ /
/ /
/ /
/ /
/
Technical data
■■ Power supply 21-27 V DC
■■ Robust aluminium housing
■■ Compact new flat or slim design
■■ Completely encapsulated with a transparent PUR casting
■■ Integrated overvoltage and temperature protection
■■ Protection class IP 68, Protection class 3
21
150
15
130/230/330/430/530
20
16
Senkung für M6 DIN912
105
30
93
15
8
Senkung für M4 DIN912
105
30
93
15
8Senkung für M4 DIN912
150/250/350/450/550
15
130/230/330/430/530
20
16
series SL-x-F R / G / B / RG / RB
series SL-x-LKF R / G / B / RG / RB
L E D S I G N A L L I G H T S E R I E S S L - x - L K F / S L - x - F
series SL-x-LKF
series SL-x-F
22
Type Power con sumption
(mA) / Red / Yellow / Green
Dimensions L x B x H
(mm)
Weight (gram)
Colour Art. Nr.
SL-1-F Ampel 40 / 40 / 40 105 x 30 x 8 150 10706
SL-2-F Ampel 80 / 80 / 80 186 x 40 x 10 350 10710
L E D S I G N A L L I G H T S E R I E S S L - x - F A M P E L
The LED signal lights series SL-X-F-Ampel with their very flat design
are easy to use in door or gate applications or other mounting surfaces
and they can fastened without any cut-off. The fully encapsulated
electronics for a high protection degree (IP 68) assures waterproof,
oil-proof and easy to clean.
The operating voltage is 24 V. The robust LEDs are current stabilized.
The LED lights are connected with a 4-wire PUR / PVC cable with
5 m length.
Technical data
■■ Power supply 21-27 V DC
■■ Robust aluminium housing
■■ Compact flat or slim design
■■ Complete encapsulated electronic-system
■■ High luminosity
■■ Protection class IP 68
/ /
/ /
series SL-x-F Ampel
23
L E D S I G N A L L I G H T S E R I E S S L - x - F A M P E L
20
200
10
40
30
93
15
8
series SL-x-F Ampel
SL-1-F Ampel
SL-2-F Ampel
24
series SL-x-TRIO
L E D S I G N A L L I G H T S E R I E S S L - x - T R I O
The LED signal lamp series SL-x-TRIO is designed for front assembly
with two M6 screws. These signal lights can easily integrated into
profile systems with nut slots.
The sturdy aluminum housing and rugged polycarbonate optics
fullfill harsh industrial environments requirements. The specially
developed for LED application polycarbonate diffuser ensures
a homogeneous light-emitting surface with high efficiency.
A simple electrical installation directly to 24 V DC is realized via
4-wire PVC cable with 5 m length. The supply voltage range is
21-27 V DC. The maximum ambient temperature is 50° C.
Typ Stromaufnahme Farbe Rot / Grün / Gelb / Blau (mA)
Gewicht (g)
Art. Nr.
SL-1-TRIO 40 / 40 / 80 / 50 280 10742
SL-2-TRIO 80 / 80 / 160 / 100 310 10743
SL-3-TRIO 120 / 120 / 240 / 150 350 10744
SL-4-TRIO 160 / 160 / 320 / 200 380 10745
SL-5-TRIO 200 / 200 / 400 / 250 420 10746
25
164/264/364/464/564
180/280/380/480/580
164/264/364/464/564
180/280/380/480/580
series SL-x-TRIO
L E D S I G N A L L I G H T S E R I E S S L - x - T R I O
Technical data
■■ Power supply 21-27 V DC
■■ Signal colours: Red / Yellow / Green / Blue
■■ Resistant to shock or vibration
■■ Robust, anodized aluminium housing
■■ Shock-resistant polycarbonate-diffuser
■■ Protection class IP 54, Protection class 3
26
L E D W O R K P L A C E A N D M A C H I N E L I G H T S E R I E S A L - x
AL-x is intended for use in assembly workplaces and designed for
machinery which does not use liquid coolants.
A long service life and the latest LEDs, distinguished by excellent
energy efficiency, enable you to achieve cost savings with these light
systems as, when compared to conventional lights, they represent a
maintenance-free solution characterised by low energy consumption.
Flexible mounting options realised with adjustable slot nuts (slot 8)
facilitate easy integration of the LED workplace light AL-x in system
workplaces or machines. The integrated dimmer module enables
optimum adaptation to the required lighting conditions.
Technical data
■■ Power supply 21-26 V DC
■■ Connection with M12 connector system
■■ Maximal ambient temperature 40° C
■■ Beam angle 100°
■■ Dimming with membrane keys
■■ Fine prismatic front glass for glare suppression (PMMA)
■■ Daylight quality, colour temperature 5700 K, Ra > 80
■■ Protection class IP 40
Type Power con sumption
(A)
Illuminance (lux) 1 m
Weight (kilogram)
Art. Nr.
AL-24 1 700 1,25 10245
AL-48 2 1200 2,00 10246
AL-72 3 1600 2,75 10257
series AL-x
27
L E D W O R K P L A C E A N D M A C H I N E L I G H T S E R I E S A L - x
Scope of delivery:
AL-x workplace light with M12 connector socket,
2 x slot nut 8, M6 thread
Optional:
Desktop power supply with prewired M12 connector socket
TN-36-M12 / TN-72-M12 / TN-90-M12
80
484/784/1084
40
12.5
80
484/784/1084
40
12.5
80
484/784/1084
40
12.5
series AL-x
28
series AL-x-AC
L E D W O R K P L A C E A N D M A C H I N E L I G H T S E R I E S A L - x - A C
Technical data
■■ Operating voltage 90-240 V AC
■■ Active Power Factor Compensation (PFC)
■■ Installation with GST18i3 connector
■■ GST 18i3 through wiring socket
■■ Impact-resistant polycarbonate diffuser
■■ Large-glare-free light aperture
■■ Mounting via integrated slots
System workplace luminaires of series AL-x-AC is maintenance-free
with highly efficient LEDs of the latest generation equipped.
The color temperature of 5700 K corresponds very close to the
daylight color and provides high contrast with a simultaneously
high color rendering index for realistic color reproduction of the
illuminated object. The adjustment to the optimum brightness the
workplace provides an integrated dimming.
Integrated slots offer with insertable, shiftable sliding nuts an easy
integration into flexible system profile workstations.
The installation with Wieland connector system GST 18i3 enables
with an additional through wiring socket a quick electric installation.
Type Power con sumption
(A)
Illuminance (lux) 1 m
Weight (kilogram)
Art. Nr.
AL-30-AC 0,2 - 0,4 800 1,50 10764
AL-60-AC 0,4 - 0,8 1300 2,37 10766
29
L E D W O R K P L A C E A N D M A C H I N E L I G H T S E R I E S A L - x - A C
50
152
410/710
Scope of delivery:
AL-x-AC workplace light,
2 x slot nut 8, M6 thread
Optional:
GST 18i3 power cable with connector on request
series AL-x-AC
30
Optional:
Magnet holder AL-6-M, power supply SN-12-M12
Look at Accessories page 32
AL-9-SV AL-9-BK
L E D W O R K P L A C E L I G H T A L - 9 - S V / B K
Our dimmable LED workplace light AL-9 is suitable for machine
and workshop lighting, even where shiny parts in daylight colour
are involved. Modern LED technology and a high degree of energy
efficiency enable you to realise quality assurance and assembly
work without any disruptive thermal radiation.
The LED workplace light AL-9 is resistant to impacting and vibra-
tion, equipped with highly efficient LEDs and provides dimmable
and flicker-free working illumination in daylight colour. Available
in colours white aluminum and black.
Technical data
■■ Power consumption at full load approx. 9 W
■■ Daylight quality, colour temperature 5700 K
■■ Dimming via UP / DOWN membrane keypad
■■ Robust aluminium housing, front optics Polycarbonat
■■ Slim light head with dimensions D20 x 360 mm
■■ Flexible metal hose 450mm
■■ Versatile mountable
■■ Protection class IP 54
Samples of applications
Scope of delivery:
Art. Nr. 10779 (white aluminum) or
Art. Nr. 10297 (black), table clamp, M6-Caps
31
Optional:
Magnet holder AL-6-M, power supply SN-12-M12
Look at Accessories page 32
IL-6
L E D I N S P E C T I O N L A M P I L - 6
The LED inspection lamp IL-6 has been designed for quality
assurance and visual inspections in industrial use.
A long flexible metal hose with 650 mm length and a slim light head
allows you to light even in hard to reach objects close to the region
of interest. An integrated dimming-module offers a brightness adjust -
ment to the ambient conditions. The impact-resistant inspection
lamp IL-6 is equipped with high-efficiency LEDs and provide an
illumination in daylight color with a high color rendering index.
Technical data
■■ Power consumption at full load approx. 6 W
■■ Daylight quality, colour temperature 5700 K
■■ Dimming via UP / DOWN membrane keypad
■■ Robust aluminium housing, front optics Polycarbonat
■■ Slim light head with dimensions D20 x 360 mm
■■ Reinforced flexible metal hose 650 mm
■■ Versatile mountable
■■ Protection class IP 54
Scope of delivery:
Art. Nr. 10297 (black) LED inspection lamp IL-6,
table clamp, M6-Caps
50
260
64
20
15
80
Flexschlauch Gesamtlänge 650mm
Befestigung 2x M6 ZylinderschraubenISO 4762
50
260
64
20
15
80
Flexschlauch Gesamtlänge 650mm
Befestigung 2x M6 ZylinderschraubenISO 4762
50
260
64
20
15
80
Flexschlauch Gesamtlänge 650mm
Befestigung 2x M6 ZylinderschraubenISO 4762
32
A C C E S S O R I E S
AL-6-M (for workplace light AL-6, LED spot light series ML-5-x,
ML-10-x), 1 x magnet holder, black anodised with 3 magnets
(retention force 25 kg), 2 x M6 x 22 DIN black DIN 912,
weight 270 g, Art. Nr. 10231
ML-KL (for LED spot light series ML-5-x, ML-10-x), 1 x table clamp,
black anodised, 2 x M6 x 14 countersunk screw, black DIN 7991,
weight 120 g, Art. Nr. 10493
The mounting angle kit ML-W1 enables simple flush mounting
on 40 mm T-slot profile systems. ML-W1 is designed for light types
ML-6-45, ML-12-45, ML-18-45, ML-24-45 and ML-36-45.
ML-W1 consists of: 1 x mounting angle, black paint finish, with
offset holes, 1 x M6 x 14 countersunk screw, black, DIN 7991,
weight 50 g, Art. Nr. 10209
The mounting angle kit ML-W2 enables simple flush mounting
on 40 mm T-slot profile systems. ML-W2 is designed for light types
ML-6, ML-12, ML-18 and ML-24.
ML-W2 consists of: 1 x mounting angle, black paint finish, with
offset holes, 1 x M6 x 10 countersunk screw, black, DIN 7991,
weight 50 g, Art. Nr. 10210
The magnet holder ML-M enables simple fixing of the machine
light series ML-x, ML-x-45, ML-x-UF and ML-x-20 on ferromagnetic
surfaces. 2 x magnet holders are required per light. The magnets
have a vertical retention force of approx. 5.5 kg.
ML-M-UF (for light series ML-x-UF), 1 x magnet holder, black ano-
dised with magnet, 1 x M6 x 8 hexagonal socket screw DIN 912,
weight 40 g, Art. Nr. 10239
ML-M-20 (for light series ML-x-20), 1 x magnet holder, black ano-
dised with magnet, 1 x M6 x 14 hexagonal socket screw DIN 912,
weight 40 g, Art. Nr. 10285
ML-M-45 (for light series ML-x-45): 1 x magnet holder, black ano-
dised with magnet, 1 x M6 x 14 countersunk screw, black DIN 7991,
weight 40 g, Art. Nr. 10218
ML-M-90 (for light series ML-x): 1 x magnet holder, black anodised
with magnet, 1 x M6 x 10 countersunk screw, black DIN 7991,
weight 40 g, Art. Nr. 10225
AL-6-M
ML-KL
ML-W1
ML-W2
ML-M
ML-x-P
ML-x-P foot plate set (for light series ML-x-P) consists of:
1 x ML-x-P-foot plate, 2 x M6 x 14 countersunk screw, weight 50 g,
Art. Nr. 10762
33
A C C E S S O R I E S
Extensions M12 female, 3-pole, PUR / PVC
RDLF 00300 341 3000 3 metres weight 120 g Art. Nr. 10051
RDLF 00300 341 5000 5 metres weight 190 g Art. Nr. 10052
RDLF 00300 341 MT10 10 metres weight 360 g Art. Nr. 10050
Power supply M12
SN-12-M12, 24 V / 0.5 A, 1.5 m cable / M12 connector socket,
weight 110 g, Art. Nr. 10255
SN-24-M12, 24 V / 1 A, 1.5 m cable / M12 connector socket,
weight 155 g, Art. Nr. 10256
Scope of delivery: Power supply with prewired.
M12 connector socket
Splitter ML-VT-2xM12
The Splitter (2 x M12 Female / 1 x M12 Male) allows you to
connect two lamps one a load.
Weight 30 g, Art. Nr. 10553
Rotary attachment WML-D
The rotary attachment is designed for our LED-lamp-series ML-x-UF
and WML-x-UF. Included are one light adapter, 1x mounting
bracket, 2 x M6 x 8 allen, 1 x M6 washer
For each lamps are 2 pcs. rotary attachment needed.
Weight 60 g, Art. Nr. 10298
Desktop power supply M12
TN-36-M12, 24 V / 1.65 A, M12 connector socket, weight 300 g,
Art. Nr. 10252
TN-72-M12, 24 V / 3 A, M12 connector socket, weight 400 g,
Art. Nr. 10253
TN-90-M12, 24 V / 3.75 A, M12 connector socket, weight 500 g,
Art. Nr. 10254
Scope of delivery: Desktop power supply with prewired.
M12 connector socket, Velcro tape
Dimm-Modul ML-PWM
The module allows the dimming of our LED lights.
Dimming is possible with digital inputs or external UP / DOWN
buttons or an analog control voltage 0-10 V.
Weight 60 g, Art. Nr. 10647
V-M12
SN-M12
ML-VT-2xM12
WML-D
TN-M12
ML-PWM
34
I N F O R M A T I O N
Type of the space or activity
(Examples)
Density of light
in lux
■■ Traffic areas and corridors
■■ Break room
■■ Supply and stockrooms (not constantly filled)
100
■■ Loading ramps and load areas
■■ Drives with passenger traffic
■■ Control posts
150
■■ Rough assembly works
■■ Casting cleaning shop, Maschinenformerei, sand preparation
■■ Process from heavy sheet metals (starting from 5 mm)
■■ Switch space and house-technical systems
■■ Open-die forging
■■ Cafeterias, tea kitchens
■■ Clothes, wash rooms, toilets, baths
200
■■ Medium-fine assembly works
■■ Process from light sheet metals (up to 5 mm)
■■ Dispatch and packing areas
■■ Rough and middle machine works (tolerances starting from 0.1 mm)
■■ Galvanize
■■ Weld, die forging, hand and coring
■■ Control stands in rolling, hut and steel plants
■■ Production plants with constant manual interventions
300
■■ Precise machine works, loops (tolerances under 0.1 mm)
■■ Precise assembly works
■■ Building of bodywork and assembly
500
■■ Surface processing and lacquer finish
■■ Much very exact assembly works
■■ Manufacture from tools and cutting tools
■■ Lacquer finish, squirting and sharpening cabs in the automotive manufacture
■■ Marking out and check
750
■■ Paint: Correcting and inspection in the automotive manufacture
■■ Tools appliance and building of gadgets
■■ Precision and micro mechanics
1000
Necessary density of light after DIN EN 12464
L E D M A C H I N E L I G H T S E R I E S
Your Distributor: SCHREMPP electronic e.K. | Wiesenstrasse 5 | D - 65843 Sulzbach
T +49 6196 802399-0 | F +49 6196 802399-9
[email protected] | www.schrempp-electronic.de