Upload
angel-rojas
View
26
Download
6
Embed Size (px)
Citation preview
Angel J. Rojas C. Electrical Automation and Protection Engineer
PERSONAL SUMMARY
I am a competent electrical engineer with extensive Experience of Electrical Power System Protection, measurements and automation:
Lab tests, Programming, Installation and Commissioning of Distance, Overcurrent and Differential Relays, Meters, Bay
Control Relays, Fault Recorders and Instrument Transformers.
Investigation and Analysis of faults in lines, transformers and busbars.
Installation and Commissioning of protection and control systems in 115-69-34.5-13.8-4.16 KV Substations with
different configurations.
Working Experience with Protocols for Electrical Substations Automation (IEC 61850 standard DNP 3.0, Modbus).
Working experience with Electrical Power Systems Protection simulations with Power Factory software.
Overcurrent Protection Coordination in Medium and High Voltage Systems (Breakers-Fuses-Reclosers-Relays).
Operations of Circuit Breakers, Power Switches, Fuses, Reclosers, Sectionalizers, Power Contactor, Breakers in 115-69-
34.5-13.8-4.16 KV electrical systems.
Selection and specification for Procurement of Automation, Protection and Control devices.
IEDs models and Software:
General Electric: F60, F35, T60, IFC, SR760, SR750, D400, UR Enervista
Siemens: 6MD6, 7VK, 7SA, 7SJ6, 7UM6, 7UT6, ISGS, SIMEAS R, Digsi, Sigra, ISGS
SEL. 551, 5010, 5020, 5030, Accelerator
ABB: RED670, RER620, REF615, REL316*4, PCD2000, PCM600, Win PCD, WaveWin
Schneider: NULEC PTCC/ADVC1/AVDC2, PM ION 7700/3720/3710/8800/8600/7330/7350, AREVA MICOM P127,
VAMP 140/210, S1 Studio, VampSet, WSOS
Cooper: FORM 4D/6, Proview NXG
PowerStation: PowerPlot, ETAP
Digsilent: Power Factory
RELATED TRAININGS
Power System Protection Diplomaed
Cambridge Univ. English Certificate
Power System Protection Course
Low/Medium Volt Protection Course
IEC 61850 Standard Course
DNP3.0 Standard Course
GE D400 Programming Course
EDUCATION
Electrical Engineer Degree. 2008-2013. Santiago Mariño Polytechnic University Institute
PERSONAL DETAILS
Name: Angel Rojas Age: 33 Address: Venezuela Maturin, Monagas Phone Number: 058-426-5900057
Email: [email protected] LinkedIn Profile: https://ve.linkedin.com/in/angel-rojas-858725b2
WORK EXPERIENCE
PETROLEOS DE VENEZUELA, SA (PDVSA) – VENEZUELA MORICHAL
Electrical Automation and Protection Supervisor 2013 – Present (3 years)
Electrical Automation and Protection Engineer 2006 – 2013 (7 years)
Most Relevant Projects
1. Installation and Commissioning of 34,5-13,8 KV 10/12,5/15 MVA Transformer in Substation #3 Morichal (PDVSA)
Job Position: Power System Protection Supervisor
Involved Activities: Location and identification of Transformer Boxes. Installation of Transformer Parts and instrumentation.
Current Transformers, AC-DC Sources, internal Trip/Alarms Cabling toward protection relays in control room. Digital
Signals supervision and trips/controls testing. High and Low side Circuit Breakers Primary injection. Fans Stages Testing.
Installation, cabling, programming and commissioning of Differential and overcurrent relays. Commissioning of Power
Transformer.
IEDs models: GE F35 (High and low sides overcurrent Protections), GE T60 (Differential Transformer Protection), GE IFC
(Replaced High side overcurrent Protections)
Software: GE UR Enervista, PowerStation PowerPlot, Siemens Sigra.
2. Installation and Commissioning of 34,5 KV ABB OVR/RER620 Reclosers in Petroindependencia (PDVSA)
Job Position: Power System Protection Supervisor
Involved Activities: Installation of two (02) OVR Reclosers and Programming of RER620 relays as Reclosers. Setting of
50P/50N/51P/51N Protection Functions and 79 functions. Reclosers’ Primary injection.
IEDs models: ABB RER620
Software: ABB PCM600, PowerStation PowerPlot, Siemens Sigra.
3. Installation, Programming and Commissioning of Fault Recorder in Substation FF Sinovensa (PDVSA)
Job Position: Power System Protection Supervisor
Involved Activities: Installation and Programming of SIEMENS SIMEAS R Fault Recorder. Secondary Injection of AC
Current and Voltage Digital Acquisition Units of Recorder
IEDs models: SIEMENS SIMEAS R
Software: Siemens Oscop P.
4. Installation, Programming, Commissioning and integration of kWh Meter in Substation Temblador (PDVSA)
Job Position: Power System Protection Supervisor
Involved Activities: Installation and Programming of seven (07) Schneider (Power Measurement) 7350 ION kWh Meter.
Secondary Injection of AC Current and Voltage inputs. Remote control and supervision tests
IEDs models: PM 7350 ION
Software: PM ION Enterprise
5. Commissioning of Automation system in Substation Petromonagas (PDVSA)
Job Position: Power System Protection Supervisor
Involved Activities: Remote Supervision and control Tests to two (02) PM ION 7700 Meters, nineteen (19) GE SR760 and
two (02) GE T60 IEDs, installed in 115-34,5 KV circuits of Substation Petromonagas. Commissioning of GALBA SCADA
and Netdas RTU.
IEDs models: PM ION 7700, GE SR760, GE T60.
Software: PM ION Enterprise, GE Enervista, SCADA Galba, Modscan (Modbus Simulator), Dexter (DNP3.0 Simulator)
6. Installation and Commissioning of 34.5 KV Reclosers in Substation Jobo Norte (PDVSA)
Job Position: Power System Protection Supervisor
Involved Activities: Testing. Installation, cabling, programming and commissioning of Reclosers. Control tests. Reclosers
Primary injection
IEDs models: ABB RER620
Software: ABB PCM 600, PowerStation PowerPlot, Siemens Sigra
7. Implementation of Automatic Transfer in Substation Cerro Negro 34,5 KV (PDVSA)
Job Position: Power System Protection Supervisor
Involved Activities: : Laboratory Tests, Installation and Programming of two (02) digital incomers relays and one (01)
digital bus tie relay with Transfer Function as a replacement of digital relays without transfer functions. Secondary Injection
of AC Current and Voltage inputs. Remote control and supervision tests
IEDs models: Siemens 7SJ61, GE SR760
Software: Siemens Digsi, GE Enervista, PowerStation PowerPlot, Siemens Sigra.
8. Installation, Programming, Commissioning and integration of kWh Meter in Substation FF Sinovensa (PDVSA)
Job Position: Power System Protection Supervisor
Involved Activities: Installation and Programming of five (05) Schneider (Power Measurement) 7350 ION kWh Meter.
Secondary Injection of AC Current and Voltage inputs. Remote control and supervision tests
IEDs models: PM 7350 ION
Software: PM ION Enterprise
9. Implementation of Automatic Transfer in Substation FF Sinovensa 34,5 KV (PDVSA)
Job Position: Power System Protection Supervisor
Involved Activities: : Laboratory Tests, Installation and Programming of two (02) digital incomers relays and one (01)
digital bus tie relay with Transfer Function as a replacement of digital relays without transfer functions. Secondary Injection
of AC Current and Voltage inputs. Remote control and supervision tests
IEDs models: Siemens 7SJ64, GE SR760
Software: Siemens Digsi, GE Enervista, PowerStation PowerPlot, Siemens Sigra.
10. Synchronization Tests of Morichal Generation Plant with 115 KV Transmission System (PDVSA)
Job Position: Power System Protection Supervisor
Involved Activities: Balanced/Unbalanced low flow Simulations, Stability Simulations, Staged Generation with selected
Power Factors according to the Generator P-Q Curve and system limits. Operations in electrical system during stages of
generation
IEDs models:
Software: Power Station ETAP, Digsilent Power Factory
11. Replacement and Commissioning of Relays in Substation Cerro Negro 34,5 KV (PDVSA)
Job Position: Power System Protection Supervisor
Involved Activities: : Installation and Programming of two (02) digital feeder relays as a replacement of analogue relays.
Secondary Injection of AC Current and Voltage inputs. Remote control and supervision tests
IEDs models: Siemens 7SJ61, ABB Racid
Software: Siemens Digsi, PowerStation PowerPlot, Siemens Sigra.
12. Replacement of kWh Meter in Substation Cerro Negro 115-34,5 KV (PDVSA)
Job Position: Power System Protection Supervisor
Involved Activities: Installation and Programming of eight (08) Schneider (Power Measurement) 7350 ION kWh Meters as a
replacement of 7330 ION kWh Meters. : Installation and Programming of four (04) Schneider (Power Measurement) 8800
ION kWh Meters as a replacement of 7330 ION kWh Meters. Secondary Injection of AC Current and Voltage inputs. Remote
control and supervision tests
IEDs models: PM 7350 ION, PM 7330 ION, PM 8800 ION
Software: PM ION Enterprise
13. Installation and Commissioning of 34.5 SF6 Circuit Breakers in Substation Cerro Negro (PDVSA)
Job Position: Power System Protection Supervisor
Involved Activities: Testing. Installation, cabling, programming and commissioning of overcurrent relays. Current
Transformers, AC-DC Sources, internal Trip/Alarms Cabling toward protection relays in Cabinets. Digital Signals
supervision and trips/controls testing. Circuit Breakers Primary injection.
IEDs models: GE F35, Siemens 7SJ64
Software: GE UR Enervista, PowerStation PowerPlot, Siemens Digsi, Siemens Sigra.
14. Installation and Commissioning of 34.5 Reclosers in Portico #1 Substation (PDVSA)
Job Position: Power System Protection Supervisor
Involved Activities: Testing. Installation, cabling, programming and commissioning of Reclosers. Cabling of TCP Networks
across Reclosers. Programming of communication parameters in Reclosers. Programming of DNP3.0 Network in GE D400
RTU. Supervision and Control tests. Remote Supervision and Control testing. Reclosers Primary injection.
IEDs models: Schneider Nulec, GE D400, Cooper NOVA 38
Software: Schneider WSOS, Cooper Proview NXG, GE D400 Web programming Interface,
15. Remote Supervision and Control of Nulec Reclosers of J-20, O-16 and M-19 Substations (PDVSA)
Job Position: Power System Protection Supervisor
Involved Activities: Cabling of RS-485/TCP Networks across Reclosers. Programming of communication parameters in
Reclosers. Programming of RS485/IP Converters. Programming of Modbus Network in GE D400 RTU. Supervision and
Control tests
IEDs models: Schneider Nulec, GE D400
Software: Schneider WSOS, GE D400 Web programming Interface.
16. Synchronization Tests of Sinovensa Generation Plant with 34.5 KV Electrical System (PDVSA)
Job Position: Power System Protection Engineer
Involved Activities: Balanced low flow Simulations, Staged Generation with selected Power Factors according to the
Generator P-Q Curve and system limits. Operations in electrical system during stages of generation
IEDs models: PM 8600 ION
Software: Schneider ION Enterprise
17. Installation and Commissioning of Digital overcurrent Relay as a replacement of electromechanical Relay of Line #5 in
Substation Morichal 34.5 KV (PDVSA)
Job Position: Power System Protection Engineer
Involved Activities: Lab Testing of overcurrent relay. Programming of logics and setting of relay. Installation of digital relay
and retirement of electromechanical relay. Cabling of Circuit Breaker’s digital signals and control. Circuit Breakers Primary
injection. Trips and reclose tests.
IEDs models: SEL 551
Software: SEL 5010, PowerStation PowerPlot.
18. Installation and Commissioning of H-320 and H-820 115 KV Circuit Breaker in Substation Morichal (PDVSA)
Job Position: Power System Protection Engineer
Involved Activities: Field testing of overcurrent relays. Programming of distance relays. Cabling of Circuit Breaker’s digital
signals and control. Circuit Breakers Primary injection. Trips and reclose tests.
IEDs models: ABB REL 316*4
Software: ABB CAP V4.5
19. Setting of Distance Relays associated to Morichal – Temblador 115 KV Transmission Line (PDVSA)
Job Position: Power System Protection Engineer
Involved Activities: Checking of Lines and Transformers Impedance Characteristics. Evaluation of Operations conditions.
Calculation of Zones Impedance Settings. Programming of Distance Relays
IEDs models: ABB REL 316*4
Software: ABB CAP V4.5, V5.2, V6.5
20. Remote Supervision and Control of ABB PCD Reclosers of 6A Substation (PDVSA)
Job Position: Power System Protection Engineer
Involved Activities: Cabling of RS-485 Network across Reclosers. Programming of communication parameters in Reclosers.
Programming of Modbus Network in GE D20 RTU. Supervision and Control tests
IEDs models: ABB PCD. GE D20
Software: Win PCD, Modscan, GE Config Pro (SG Config)
21. Installation and Commissioning of 115-34,5 KV 20 MVA Transformer Protections in Substation Jobo Norte (PDVSA)
Job Position: Power System Protection Engineer
Involved Activities: Existing Control Wiring Survey. Elaboration of control Drawings with new installation. Cabling of
Current Transformers signals, Transformer Alarms/Trips signals toward control room. Cabling of Current Transformers
signals, Circuit Breakers Alarms/Control signals toward control room. Lab Testing of Differential and overcurrent Relays.
Cabling of Control Room’s internal wiring associated to Transformer Protection. Commissioning of Transformer Differential
and Overcurrent Protection
IEDs models: GE F35 (High side overcurrent backup Protection), Siemens 7UM62 (Differential Transformer Protection)
Software: GE UR Enervista, PowerStation PowerPlot, Siemens Digsi, Siemens Sigra.
22. Elaboration of local SCADA With Software ION Enterprise for Morichal Substation (PDVSA)
Job Position: Power System Protection Engineer
Involved Activities: Creation of single line diagrams, linking of controls and digital signals, programming of Modbus
protocol in 7700 ION and 3720ACM IEDs, programming of historical parameters in ION Enterprise
IEDs models: PM ION 7700, PM 3720ACM
Software: PM ION Enterprise, Modscan (Modbus Simulator)
23. Installation and Commissioning of 34,5-13,8 KV 10 MVA Transformer Protections in Substation Temblador Pueblo
(PDVSA)
Job Position: Power System Protection Engineer
Involved Activities: Elaboration of control Drawings with new installation. Cabling of Current Transformers signals,
Transformer Alarms/Trips signals toward control room. Cabling of Current Transformers signals, Circuit Breakers
Alarms/Control signals toward control Cabinet. Lab Testing of Differential Relay. Cabling of Cabinet’s internal wiring
associated to Transformer Protection. Commissioning of Transformer Differential Protection
IEDs models: GE F35 (High side overcurrent backup Protection), Siemens 7UM62 (Differential Transformer Protection)
Software: GE UR Enervista, PowerStation PowerPlot, Siemens Digsi, Siemens Sigra.
24. Remote Supervision and Control of 7700ION meter associated to H305 Circuit Breaker of 115 KV Temblador Substation
(PDVSA).
Job Position: Power System Protection Engineer
Involved Activities: Programming of communication parameters in 7700 ION. Programming of Modbus Network in GE D20
RTU. Supervision and Control tests
IEDs models: PM 7700 ION, PM COM128 RS-485-232 Converter
Software: Schneider ION Enterprise
RELATED TRAININGS AND COURSES
1. DIPLOMAED: Fundamentos de Protecciones Eléctricas de Transmisión, Generación y Distribución
Duration: 200 hours Date: From 2014-nov-14 to 2015-feb-16
Instructor: PhD Juan Bermúdez, Ing. Jesús Pacheco Company: Universidad Simón Bolívar (USB)
Topics:
Análisis de Sistemas de Potencia en régimen Permanente
Análisis de Sistemas de Potencia en régimen Dinámico
Conceptos Básicos de Protecciones en Sistemas de Energía
Conceptos Básicos de Protecciones Eléctricas en Transmisión
Conceptos Básicos de Protecciones Eléctricas en Distribución y Generación
Laboratorio de Protecciones
2. Course: Dinámica de Sistemas de Potencia
Duration: 32 hours Date: From 2014-aug-11 to 2014-aug-14
Instructor: PhD Pedro Carvajal Company: CODELECTRA
3. Training: Sistemas de Protecciones Eléctricas, Reconectadores y equipos de Media tensión ABB
Duration: 16 hours Date: From 2012-jul-25 to 2012-jul-26
Instructor: Ing. Edgar Lugo, Ing Gerardo Granada Company: ABB
4. Course: Estándar de Comunicaciones IEC61850
Duration: 32 hours Date: From 2012-jul-10 to 2012-jul-12
Instructor: Ing. Mario Torres Company: ACOVIS
5. Course: Nuevos Métodos de Mantenimiento Preventivo y Diagnostico de fallas en Transformadores de Potencia y
Distribución
Duration: 16 hours Date: From 2011-sep-20 to 2011-sep-21
Instructor: Ing. Darío Heiber Company: Servicio Venezolano de Transformadores (SVT)
6. Course: Medición de Resistividad de suelos y Resistencia de Puesta a Tierra
Duration: 32 hours Date: From 2011-may-18 to 2011-may-21
Instructor: Ing. Joffre Carmona Company: CODELECTRA
7. Course: Configuración, Programación e Integración de Concentrador de Comunicaciones GE D400
Duration: 40 hours Date: From 2010-dec-06 to 2010-dec-10
Instructor: Ing. Eduardo Rodríguez Company: TELETROL
8. Course: English Interchange 2 Level, equivalent to A2, According to the common European Frameworks Standards
Duration: 2,5 months Date: September 2010
Instructor: Arlenys Quijada Company: FYRLOIS, CEF
9. Course: English Interchange Intro and Interchange 1 Level, equivalent to A1, According to the common European
Frameworks Standards
Duration: 5 months Date: June 2010
Instructor: Angelica Arzolay Company: FYRLOIS, CEF
10. Course: Protecciones de Sistemas Electricos en Baja y Media Tensión
Duration: 32 hours Date: From 2010-apr-21 to 2010-apr-24
Instructor: PhD Elmer Sorrentino Company: CODELECTRA
11. Training: Reconectadores NULEC
Duration: 16 hours Date: From 2009-mar-10 to 2009-mar-11
Instructor: Ing. Juan Otavo Company: Schneider Electric
12. Course: Protecciones en Sistemas Electricos de Potencia II
Duration: 40 hours Date: From 2008-jun-23 to 2008-jun-27
Instructor: PhD Ernesto Vasquez Company: ESP OIL
13. Course: Protocolo de Comunicaciones DNP3 e Integración de RTUs GE Energy D20/D200
Duration: 40 hours Date: From 2008-apr-10 to 2008-apr-14
Instructor: Ing. Eduardo Rodríguez Company: TELETROL
14. Course: Protecciones en Sistemas Electricos de Potencia I
Duration: 40 hours Date: From 2008-mar-10 to 2008-mar-14
Instructor: PhD Ernesto Vasquez Company: ESP OIL
15. Course: Soporte y Mantenimiento de Computadoras
Duration: 28 hours Date: From 2006-mar-15 to 2006-mar-18
Instructor: Ing. Juan Sanchez Company: HONEYBEE CA
KEY SKILLS AND COMPETENCIES
Ability to prepare technical and Analytical reports.
Experience in the use of ETAP and PowerFactory Software.
Experience of working to IEEE standards.
Leadership Experience (Ten people around)
Strong decision-making skills and the ability to prioritize and plan effectively.
Methodical approach to all tasks.
Knowledge of Visual Studio and MS Project software.
Good customer facing and communication skills
Able to travel
Communication skills
Target orientated