FS- 4000 is option board providing an interface with different data devices via RS-232. FS- 4000 is designed for use with MOTOTRBO DM2xxx/ DM4xxx radios. The optional board is respectively compliant with MOTOTRBO requirements R2.X.OB.

FS-4000 is installed inside the radio and uses the internal bus of the radio. The data-cable is connected to mini-jack on optional board.

A typical application is the ability to connect older RTUs to newer MOTOTRBO radios to facilate migration to digital and protecting investment.

, T A

Utilities, Oil and Gas Pipelines, Water supplyIndustrial Automation, elemetry and SCAD applications

• Allows data rates of up to 2.4 Kbps over-the-air• Own buffering of 16 packets and error correction • Can be easily programmed locally or remotely over-the-air• Can be used with many other controllers with RS-232 interface• ARM7 microprocessor architecture• MAX3232 line driver• Hardware handshaking (RTS, CTS)• Max Tx PDU size is 1500 bytes• Windows based configuration software • Local and remote ‘over-the-air’ programming (from one to another)• Adjustable interface parameters (bit rate, data bits, etc.) and radio initialisation (ID, CAI Network)• Upgrade is easy and avaliable after new DP firmware is released• Approved on MOSCAD, ACE36XX and Delta-X controllers

Radio hadrware/ Releases Compatibility: Compatible with MOTOTRBO DM2xxx/ DM4xxx

Computer Hardware/ Operating Systems: PC or data devices wiht the serial port

Interfaces: Data- cables for mobile MOTOTRBO radios (delivered with the appropriate modelof OB). ‘End’ connectors can be either RJ-45 orDB-9F in accordance with the customers’ requirements.

Direct Mode, MOTOTRBO System Architecture: Repeater Mode

MOTOTRBO MOSCAD-LACE36XXDELTA-X