Upload
doanbao
View
229
Download
2
Embed Size (px)
Citation preview
Company Profile
Company Profile 2016
- Growing together with the solar market
- Key expertise on photovoltaics
- Developer & early mover in developing markets
- PPAM Transparium:
bifacial, high efficient solar power
PPAM SOLKRAFT Developer & early mover in developing markets
The best of the world
Swedish engineering is a quality trademark you can trust. When
combined with high quality solar cells, in the PPAM Onyxium, PPAM
Paladium or PPAM Transparium, high yields are reached with good
thermal properties at low installation costs. Our panels are produced
using only high quality raw materials from leading suppliers. PPAM
Onyxium and PPAM Paladium are ideal for residential buildings, on
facades, industrial rooftops and large scale solar power plant
systems. The bifacial PPAM Transparium can be used in any
application such as building shading, glass railings, shading for
parking lots etc for maximum power output.
PPAM SOLKRAFT is a spin-off from
Perpetuum Automobile founded in
2002 dealing with efficient and
sustainable energy solutions. Located
in Linköping, Engineering and research
centre is connected to Linköping
university, utilized for realizing
sustainable development through
photovoltaic modules and efficiency
measures.
PPAM SOLKRAFT’s primary product is Swedish engineered high quality photovoltaic modules, using only high quality raw materials from leading suppliers. The black Onyxium module is a highly efficient mono-crystalline solar module. The Paladium module is a cost efficient Poly-crystalline photovoltaic module with a fine bluish touch. The
Transparium module is a semi-transparent module where light gets through. PPAM SOLKRAFT offers engineering services in order to establish highly efficient projects. The first start of Sustainable Plus-energy House of Sweden: What all Swedish building professors thought was impossible, PPAM SOLKRAFT, did in 2010. A successful transformation has been done of an old house into not only a passive-house, but plus-energy house. In 2012 PPAM was awarded the Energy- and climate prize 2012 by the governor of Östergötland, Sweden for innovative product development and combining phD with entrepreneurship.
PPAM SOLKRAFT - ABOUT US
PPAM SOLKRAFT - PROJECT DEVELOPER AND EARLY MOVER IN DEVELOPING MARKETS
Drivers
renewable energy with minimal environmental impact.
Responsibility
as a player in a country where environmental performance is world leading
PPAM SOLKRAFT strives to help developing markets where greater
leverage can be achieved.
Stable economy
high solidity and positive cash-flow allows for ambitious
internationalisation.
Professionalism & profitability
only projects that are characterised by professionalism and
profitability are of interest. PPAM SOLKRAFT seeks long
term and economically sustainable projects.
PPAM SOLKRAFT RESOURCE HIGHLIGHTS
20 employees 20 subcontractors and 20 technicians and workers in Sweden. 30 in Middle
East/Asia. Turnover €7,1 mln (2015) PPAM SOLKRAFT; sells, builds and commission solar power plant for all
types of utility service.
Installed power 2015: 3,3 MW
Installed abroad: 0,55 MW
Installed total since 2010: 11 MW
Sweden's first energy plus building was renovated
by PPAM SOLKRAFT in 2010, where efficiency
measures minimises the building energy use from
180kWh/m²,yr to 35 kWh/m²,yr and photovoltaic
solar modules produces 45 kWh/m²,yr.
PPAM SOLKRAFT produces photovoltaic solar
modules and utilizes them in turn-key solar power
projects or distributing them to partners for
installation.
PPAM SOLKRAFT KEY EXPERTISE ON PHOTOVOLTAICS
Unique Selling Propositions
In house R&D resulting in a scientific approach to solar power
development and a deep understanding of solar power both on a micro
level as well as on a macro level
Strong ties and long term relationships to solar component suppliers
world wide
Probably the shortest delivery time on the Swedish market
Use of advanced simulation software and almost two decades of
irradiation data providing the customer with a reliable decision base
Logging of production data for all customers leads to customer
satisfaction and early detection of irregularities
PPAM SOLKRAFT SERVICES IN PROJECT PHASES
Product and Solutions High quality Solar Module Manufacture
Solar park On-grid and off-grid
Rooftop solar power plant turn-key project
Solar house
Project realization and consultancy
Project Development
EngineeringSupply & project
Implementation
Sevice Management
Product development & Manufactaring
Supply of System
Installation & Comissioning
Conceptualization
Product Development, Design &
Verification
Technical design and analysis
Technical Consultancy and requirement
Analysis, Environmental Analysis.
Energy yield Assessment
Site Assessment and feasibility study
Tender Support
Vendor Assessment and selection
Technical Audit of Solar plant
Solar Module Manufacture
PV Component Testing
Manufacturing Inspection
& Supervision
Final Acceptance Test (FAT)
Solar power Plant
Plant Functional & Safety Tests Monitoring,
Verification of Performance
Maintenance Management
Failure Analysis
Field Maintenance (Corrective &
Preventive)
Health, Safety & Environment Inspection
Contact PPAM SOLKRAFT Finnängen, Husarvägen 57 SE-590 72 LJUNGSBRO +46 13 392040 www.ppamsolkraft.se [email protected]
References
Malard Solar Park, 532 kW at present, (1600 kW planned) Middle-East
Malard Solar Park 532kWp Monocrystalline Onyxium 290W. 51 SMC 9000TL inverters.
Iran’s largest solar park. In a country where gas can be bought at 25 $cent/l PPAM
SOLKRAFT realises its first major solar park.
HSB Gasellen, Linköping 693,1 kWp
Polycrystalline Paladium 285-300 Wp and monocrystalline Onyxium 250-315 W . 66 SMC6-
10000TL 1 STP 10000TL 1 STP 20000EE inverters.
http://www.sunnyportal.com/Templates/PublicPage.aspx?page=7a8e946e-7986-4d8f-923c-
19be12624227
The installation started in 2012 and became Sweden’s largest in 2013. Built in an housing-
association called Gasellen, which speaks not only for the speed of the solar development.
Centralsjukhuset Kristianstad (CSK) - 121 kWp solar sheds
PPAM Onyxium 300 W. 6 SMC 10000TL, 3 SMC 9000TL & 3 SMC 7000TL inverters.
A solar project not only produces electricity but also saves 30 MWh/year of cooling need.
Sweden’s biggest solar shed installation.
Alvesta municipality office - 80 kWp solar sheds
PPAM Transparium 360W. 3 SMC 25000TL and 1 STP 10000TL inverters.
A solar project that not only produces ~65 000 kWh of electricity annually but also saves
~30 MWh/year of cooling need.
Finnängen, 10 kW
Building integrated monocrystalline PPAM Onyxium 290 W, SMC 8000TL inverter. Prized for
its beauty. Sweden’s first renovated plus-energy house. Transformation of an old house into
not only a passive-house, but plus-energy house.
http://www.sunnyportal.com/Templates/PublicPage.aspx?page=f5e94aa8-f4d9-4629-bde9-
f52a38e1df4c
Flisby Prästgård, 84,4 kW
Polycrystalline PPAM Paladium 285 W, 6 SMA SMC 10000TL inverters.
https://www.sunnyportal.com/Templates/PublicPageOverview.aspx?plant=65f5bb6e-8ee3-
424c-a6d3-fe6eba2cc5a6&splang=en-US
The Swedish church invests in solar and chooses PPAM SOLKRAFT as entrepreneur due to
aesthetical installations.
Dagsbergsvägen2, Norrköping, 33 kW
PPAM Paladium 285 W. 3 SMC 8000TL, 1 STP 8000TL inverters. Facade-mount.
http://www.sunnyportal.com/Templates/PublicPageOverview.aspx?plant=494046fb-da41-
411a-9c6d-16ebe0d8b928&splang=en-US