Company profile Fiore - Sogecomsogecom.com/files/4214/1466/0958/Company_profile_Fiore_LOW_.pdf · COMPANY PROFILE FIORE Technologies S.p.A. is working in the sector of ... SALMSON,

Fiore Technologies S.p.A.

Fiore Technologies S.p.A. - Via Mazzolina - 36065 Mussolente (VI) - T. +39 0424 578711 - F. +39 0424 577552 - [email protected] - www.fioretechnologies.it

Company Presentation

SILOS CADUTA E PRESSIONE SERBATOI GPL,BENZINA E GASOLIOSERBATOI ACCIAIO INOX SERBATOI USO INDUSTRIALEACCUMULATORI,AUTOCLAVI E SERBATOI VARICARPENTERIA VARIASABBIATURAMETALLIZZAZIONEVERNICIATURA

aderente alla Associazione Indutriali

della Provincia di Vicenza

FIORE Technologies SpAVia Mazzolina

36065 MUSSOLENTE (VI)Tel. 0424.578711Fax 0424.577552

C.F. E P. IVA 03679820245 Cap. Soc. € 500.000,00 i.v.

R.E.A. C.C.I.A.A. di Vicenza n. 344861

COMPANY PROFILE

FIORE Technologies S.p.A. is working in the sector of pressure vessels and piping and in the production of tanks and pressure silos (tested in accordance with Eurocodes 97/23 PED/CE), gas vessels for transport and for storage with capacity up to 400 cubic meters. FIORE TechnologiesS.p.A. is producing boilers for electrical power plants, stacks air/gas, filters and all the special pieces/fittings used for steel mill plants, burning plants, cement plants etc. FIORE TechnologiesS.p.A. producing complete fire fighting tanks, external or underground placed, complete with necessary pumping system and accessories. FIORE TechnologiesS.p.A. is producing special tanks by stainless steel materials used in the petrol-chemical sector for chemical and corrosive products. FIORE TechnologiesS.p.A. is producing tanks for cryogenic gas storage, cooling/heating piping with the use of austenitic stainless steels AISI 304-309-310-316-321-330 and ferritic steels AISI series 400. FIORE TechnologiesS.p.A. cans perform all the non destructive tests as X rays, ultrasonic, magnetoscopic and liquid penetrant tests. The Company has all the necessary technical and commercial know-how in order to obtain the certification “VISION 2000” as per new European regulation. FIORE TechnologiesS.p.A. cans perform all a full range of specialized pressure vessels and tanks, all certified CE.

COMPANY EQUIPMENT The main equipment and the maximum production capability is: 1. Hydraulic cutting machine: maximum width 3000 mm, maximum thickness 15 mm. 2. Bending machine by numeric electronic board: maximum length 4000 mm, maximum thickness 12 mm. 3. Bending roll machine for cones and cylinders: maximum length 3100 mm, maximum thickness 70 mm. 4. Oxygen lance cutting platform by numeric electronic board: size 5000x2000 mm, maximum thickness 100 mm. 5. Automatic welding plants: of different types: submerged arc welding and impulse welding TIG, electrode, MIG/MAG, etc…. 6. n° 4 platforms for submerged arc welding complete with manipulators and roller position devices. 7. Cutting, punching, drilling, lathe devices etc… for particular and special working processes, specialised sub-suppliers can follow. 8. Mouving and loading equipment: n° 3 overhead cranes 5 tons, n° 2 overhead cranes 15 tons, forklifts, and n° 1 mobile crane 15 tons. 9. Painting plant for sand-blasting, metal spraying and painting equipment complete with drying plant for dimensions up to 6600 mm (height) and 4000 mm (diameter). Thermal treatments are performed by specialized sub-suppliers.








COMPANY EMPLOYERS

Production Sector: N° 50 production persons as steel processing technicians and welders.

Office Sector: -n° 1 Administrator Manager with 1 collaborator; -n° 1 Commercial Manager -n° 1 Technical Manager -n° 1 Quality Control and Safety Manager -n° 1 Tests and certifications Manager -n° 1 Purchasing Manager -n° 1 Production and Planning Manager. The Company is located on 3 full equipped hangars, totally 8500 mq in order to achieve and satisfy all the clients requests.

COMPANY CLIENT REFERENCES A. Industrial pressure Vessels:

DANIELI Off. Mecc. S.p.A., IDRECO, ERCA: pressure vessels for noble gas, compressed air tanks, storage and emergency tanks.

ANSALDO/MACCHI S.p.A. Div. SOFINTER, PENSOTTI IDROTERMICI S.p.A., SIRZ: boilers, heat regenerators, stacks, ducts pipings.

ABB ALSTHOM Power S.p.A.: components for boilers. TECHINT S.p.A.: preheating burners and accessories. NUOVO PIGNONE S.p.A., BONO SISTEMI, ALESSIOTECH, ATI: pressure vessels and compressed air tanks. ACCIAIERIE VALBRUNA S.p.A.: tanks, ducts, stacks. HIROSS Compressed Air Treatment S.p.A. MAG-PLASTIC MACHINERY SA: air dryers. EURODEPURATORI S.r.l., CULLIGAN ITALIANA, VELO S.p.A.: waters/quarz/sand filters, sedimentation tanks. GRUPPO AIR LIQUIDE S.p.A., FRO: rotating furnaces. OM IMPIANTI: various tanks and parts of boosters. TMCI PADOVAN, MAROSO, DANIELI CENTRO COMBUSTION, SIDERIDRAULIC SYSTEM, CEIMU: surge tanks, nobles gas

storage tanks, oleopneumatic plants. SILENT, SALMSON, EBARA PUMPS : fire fighting tanks and equipment in accordance UNI EN 11292/EN 12845. CHEMVIRON CARBON, CALGON: filtration silos with actived carbons.








B. Gas pressure vessels for car-trucks pumping stations: LIQUIGAS S.p.A. BUZZANTI S.a.s., NUOVA MISSILGAS, GABOGAS: GPL storage tanks 135-150-200 m3. TAMOIL Petroli S.p.A.: trucks storage tanks up to 50 m3. AGIP GAS S.p.A.: GPL storage tanks. KUWAIT NATIONAL PETROLEUM S.p.A. etc.: GPL storage tanks. ERG: GPL storage tanks for TECNOGAS supplier. ESSO S.p.A.: GPL storage tanks up to 100 m3. SHELL Italia S.p.A.: trucks storage tanks up to 50 m3. SOCOGAS, COPRIM, COTRAKO, PEGORARO: GPL storage tanks.

FIORE Technologies S.p.A. is working with the biggest services companies in the sector of GPL for car/trucks distribution stations and storage: SOCIETA’ GENERALE GAS S.r.l., PIETRO FIORENTINI S.p.A., TECNOGAS S.r.l., MAGIGAS S.p.A., ETIGAS S.n.c., SAMTECH S.r.l., BERNARDINI IMPIANTI S.r.l., ALFA GASAUTO, CONSORZIO SARDO MANUTENTORI.

C. Building sector: FASSA BORTOLO S.p.A.: premix silos and storage silos. ROFIX S.p.A.: premix silos for storage and rent-up silos. TASSULLO S.p.A.: premix silos for rent-up. GRUPPO GRIGOLIN S.p.A.: premix silos for rent-up and fixed building sites.

PB Italia S.p.A., CALCE SAN PELLEGRINO, KNAUF, EDILCALCE, CAMS, ITALMIX, I.P.M., SAINT-GOBAIN WEBER, VILLAGA CALCE: premix pression and gravity silos for fixed sites and rent-up.

SAINT-GOBAIN S.p.A.: premix silos and plasterings silos. FIORE Technologies S.p.A. is at your full disposal and service for any enquiry and please visit our website: www.fioretechnologies.it

Eng. BRAGATO Gianfranco Eng. SUSANA Franco Sales Manager Estimation Office Tel. 0424-578711 Tel. 0424-578711 Fax. 0424-577552 Fax 0424-577552 Portable: +39 345 7338966 Portable : +39 335 7431024 Skype: fioretech Skype : fioretech e-mail [email protected] e-mail [email protected] [email protected] [email protected]



Facts

• 65 employees. • 11 certified welders (3 ASME, 11 ISPESL, 3 TUEV).• 14.000 m2 total area, 7.500 m2 covered area. • 9,5 million euro turnover.



Production



Production

Production: • Design. • Welds. • Testing. • Finishing.

Design and check of pressure vessels according to:• ASME VIII DIV. 1. • EN 13445. • AD2000 Merkblatt. • VSR.



Production

N. 4 bridge cranes up to 30 t and 9 m useful height.



Production

• Bending machines (cylindrical and conical) thickness up to 0 mm. 7



Weldings

• Welds made with machinery and procedures: – MIG – MAG – SAW – TIG – SMAW



Weldings

• Welders certified according to ASME IX and EN 1418.

• Welding procedures certified according to ASME IX and EN 15614.



Weldings

• N. SAW welding machine5 s.



Weldings



No destructive tests

• Dye penetrant test. • Ultrasonic test. • Magnetic particle test.• X ray test. • Leakage test.



Finishing

Finishing: • Sandblasting cabine for vessels up to 6600 mm height and

4000 mm diameter. • Metallization with sprayed zinc. • Painting cabine up to 6600 mm height and 4000 mm

diameter.



Certificates

• UNI EN ISO 9001: 2000 certificate N. 600/97/S.• ASME S certificate N. 38,423. • ASME U certificate N. 38,424. • PED H certificate N. 0263/05/CE. • PED H certificate N. /0 /CE. 1 3689 4



Certificates

EA:17

600/97/S

FIORE TECHNOLOGIES S.P.A.VIA MAZZOLINA N.A. 36065 MUSSOLENTE (VI) ITALIA

VIA MAZZOLINA N.A. 36065 MUSSOLENTE (VI) ITALIA

DESIGN AND PRODUCTION OF PRESSURE VESSELS, SILOS FOR THE BUILDING INDUSTRY "PRESS AND ATMPRESS" AND PRESSURE VESSEL BOILER AND STEEL WORKS.

PROGETTAZIONE E PRODUZIONE DI SERBATOI A PRESSIONE, SILOS PER L'EDILIZIA A CADUTA E A PRESSIONEED ELEMENTI DI CALDARERIA.

24.04.1997

20.04.2012

Per informazioni sulla validitàdel certificato, visitare il sito

www.rina.org

For information concerningvalidity of the certificate, you

can visit the sitewww.rina.org

CISQ è la Federazione Italiana diOrganismi di Certificazione dei

sistemi di gestione aziendale

CISQ is the ItalianFederation of managementsystem Certification Bodies

CERTIFICATE No.

CERTIFICATO N.

SI CERTIFICA CHE IL SISTEMA DI GESTIONE PER LA QUALITÀ DIIT IS HEREBY CERTIFIED THAT THE QUALITY MANAGEMENT SYSTEM OF

PER I SEGUENTI CAMPI DI ATTIVITÀ / FOR THE FOLLOWING FIELD(S) OF ACTIVITIES

NELLE SEGUENTI UNITÀ OPERATIVE / IN THE FOLLOWING OPERATIONAL UNITS

L'uso e la validità del presente certificato sono soggetti al rispetto del documento RINA: Regolamento per la Certificazione di Sistemi di Gestione per la Qualità

La validità del presente certificato è subordinata a sorveglianza periodica annuale / semestrale ed al riesame completo del sistema di gestione con periodicità triennaleThe validity of this certificate is dependent on an annual / six monthly audit and on a complete review, every three years, of the management system

Prima emissioneFirst IssueEmissione correnteCurrent Issue

RINA Services S.p.A.Via Corsica 12 - 16128 Genova Italy

È CONFORME ALLA NORMA / IS IN COMPLIANCE WITH THE STANDARD

Riferirsi al Manuale della Qualitàper i dettagli delle esclusioni ai

requisiti della norma

Data scadenzaExpiry Date 24.04.2015

SGQ N° 002 A SSI N° 001 GSGA N° 002 D DAP N° 001 HPRD N° 002 B PRS N° 066 CSCR N° 003 F LAB N° 0832

The use and validity of this certificate are subject to compliance with the RINA document : Rules for the certification of Quality Management Systems

Dott. Roberto Cavanna(Managing Director)

Reference is to be made to theQuality Manual for details

regarding the exemptions from therequirements of the standard

ISO 9001:2008

Membro degli Accordi di MutuoRiconoscimento EA, IAF e ILAC

Signatory of EA, IAF and ILAC MutualRecognition Agreements



Certificates



Certificates



Products

Products overview



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Products



Location

Fiore Technologies SpA Via Mazzolina 36065 Mussolente (VI) – Italy tel.: +39 0424 578711 fax.: +39 0424 577552 e-mail: [email protected]

GPS navigators: TomTom Navigator: lat = 45.776517°- lon = 11.806064° Garmin, eTrex: lat = 45°46.591’N – lon = 11°48.364’E

Documents

Company profile Fiore - Sogecomsogecom.com/files/4214/1466/0958/Company_profile_Fiore_LOW_.pdf · COMPANY PROFILE FIORE Technologies S.p.A. is working in the sector of ... SALMSON,