COMPANY PROFILE

ABOUT US

ZALCON ENERGY SDN BHD is established on April 2017 is one of the ZALCON GROUP of companies. This is a technology based Malaysian registered Private Limited Company offering Non Destructive Testing (NDT) services on Conventional include Advance testing for Oil & Gas onshore and offshore project.

Client satisfaction is our achievement where we aim and deliver services on the

exceeding expectation.

We also offer services like third party inspection, consultancy on radiation safety, ASNT training with certification, NDT equipment calibration, NDT equipment maintenance include repairing and Skilled Professional Manpower supply. With competitive edge in NDT Technology we ZALCON had developed and manufactured our own series of Pipeline Inspection Crawler System to perform radiography testing on various pipeline grade and sizes for Oil & Gas industry. Our other manufacturing item’s is Personal Radiation Bleeper, Radiation Alarm, Radiography Film Viewer and PAUT/AUT calibration block.

ZALCON is managed by a Professional Team who has experience more than 20 years in Oil Gas Industrial inspection business.

1

ORGANIZATION CHART

2

Managing of director

Technical Manager Directors HSE Manager

General Manager

Marketing Manager

Operation Manager

Admin & HR Manager

Finance Manager

Logistic Manager

Project Supervisor

Workshop Supervisor

Technician's

3

ROTATING & STATIC SERVICES

Outage Client Representation

Generator Scopes

Vibration Specialists

Hydrogen Seals

Alignments

Boroscope Inspections

Site Survey

Mobilise Field Engineers

Maintenance & Schedule Planning

Trouble Shoot & Analysis

Work & Bid Scope Development

New Parts & Overhauls

SPECIALISTS SERVICES

TURBINE

4

CONVENTIONAL NDTRadiographic Testing (X-Ray & Gamma Ray)

Positive material Identification (PMI)

Long Range Ultrasonic Testing

Boroscopic

Phased Array Ultrasonic Testing (PAUT)Time of Flight Diffraction (TOFD)

Crawler Pipeline Inspection

Ultrasonic Flaw Detection (A,B & C Scans)

Hardness Testing

Magnetic Particle Inspection (Wet & Dry Method)

Dye Penetrant Testing

Ultrasonic Thickness Measurement

Heat Treatment

ADVANCE NDT

NON DESTRUCTIVE TESTING (NDT)

5

OTHER NDT SERVICESAutomated Ultrasonic Testing

Dye Penetrant Testing ( Fluorescent or Solvent Removable)

Tank Floor Scanning

Thickness Gauge

Eddy Current Testing

Pipe Coating Holiday Testing

Computer Radiography Testing

Tubular Inspection

Wire Rope Inspection

Thermography

Videoscopes

Long Range Ultrasonic Testing

Post Weld Heat Treatment

Gas and Steam Turbine Inspection

Eddy Current Testing

NON DESTRUCTIVE TESTING (NDT)

6

Magnetic Particle InspectionMagnetic particle Inspection (MPI) is a non-destructive testing (NDT) process for detecting surface and slightly subsurface discontinuities in ferromagnetic materials such as iron, nickel, cobalt, and some of their alloys. The process puts a magnetic field into the part. The piece can be magnetized by direct or indirect magnetization. Direct magnetization occurs when the electric current is passed through the test object and a magnetic field is formed in the material. Indirect magnetization occurs when no electric current is passed through the test object, but a magnetic field is applied from an outside source. The magnetic lines of force are perpendicular to the direction of the electric current, which may be either alternating current (AC) or some form of direct current (DC) (rectified AC).The presence of a surface or subsurface discontinuity in the material allows the magnetic flux to leak, since air cannot support as much magnetic field per unit volume as metals.To identify a leak, ferrous particles, either dry or in a wet suspension, are applied to a part. These are attracted to an area of flux leakage and form what is known as an indication, which is evaluated to determine its nature, cause, and course of action, if any.

Dye Penetrant InspectionDye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, although for ferrous components magnetic-particle inspection is often used instead for its subsurface detection capability. LPI is used to detect casting, forging and welding surface defects such as hairline cracks, surface porosity, leaks in new products, and fatigue cracks on in-service components.

NON DESTRUCTIVE TESTING (NDT)

7

Ultrasonic TestingUltrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion.Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors.To identify a leak, ferrous particles, either dry or in a wet suspension, are applied to a part. These are attracted to an area of flux leakage and form what is known as an indication, which is evaluated to determine its nature, cause, and course of action, if any.

Industrial RadiographyIndustrial radiography is a method of non-destructive testing where many types of manufactured components can be examined to verify the internal structure and integrity of the specimen. Industrial Radiography can be performed utilizing either X-rays or gamma rays. Both are forms of electromagnetic radiation. The difference between various forms of electromagnetic energy is related to the wavelength. X and gamma rays have the shortest wavelength and this property leads to the ability to penetrate, travel through, and exit various materials such as carbon steel and other metals.

NON DESTRUCTIVE TESTING (NDT)

8

ROTATING & STATIC SERVICES

Skill Manpower Supply ASNT Level 1 & 2 Certification

Repair, Service andCalibrate NDT Equipment Welding

OTHER SERVICES

CLIENTS

11

CERTIFICATE & ACCREDITATION

12

Kementerian Kewangan Malaysia

Reference : 357-02228723Certi�cate No. : K22154883431795483

CATEGORIES:091010920111201

140301140503220507220509

221010

221101

221901

- Bahan binaan- Peralatan keselamatan jalanraya/ perabut jalan- Jentera berat- Kabel elektrik dan aksesori- Lampu, komponen lampu dan aksesori- Pump/paip air dan komponen- Production testing, surface well testing and wire line service- Kolam kumbahan / sistem perawaran / talian paip / sesalur- Kakitangan iktisas (Profesional-Tidak termasuk khidmat perunding- Membeli barang lusuh (Tidak perlu permit)

Kementerian Pertahanan Malaysia

Reference No. : MOD.100-2/6/2(122)Registration No.: KB 494/357-02228723

UEM EDGENTA BERHAD

Reference No. : 1944 & V1383

CIDB Malaysia

Registration No. : 0120130206-SL148381Certi�cate No. : 278443A

GREDG5G5G5

CATEGORYMECEB

(Mekanikal dan Electrikal)(Pembinaan Kejuruteraan Awam)(Pembinaan Bangunan

No.F-10-1, Putra Walk Commercial Centre, Jalan PP25, Taman Pinggiran Putra, Seksyen 2, Bandar Putra Permai, 43300 Seri Kembangan, Selangor.

admin@zalconenergy.com

ZALCON ENERGY SDN. BHD. (1225369-X)

+603 89597522

+603 89597523

www.zalconenergy.com