meet your drilling needs

COMPACT PILING RIGS

Why Geax DTC ?HIGHER OVERALL RIGIDITY

COMPACTNESS ALLOWS TO BE AGILE ON SITES

NOISE REDUCTION DURING SPIN OFF

THE ARTICULATION OF THE MAST PERMITS TO REACH MANY DIFFERENT WORKING CONFIGURATIONS

POSSIBILITY TO WORK ON SEVERE SLOPES AND WITH HIGH SIDE TILT

POSSIBILITY TO DRILL UNDER SEVERE OVERHEAD LIMITS

AS AN EXCAVATOR CAN REACH ALMOST ANY DIFFICULT ACCESS JOBSITE AND UNEVEN GROUNDS

LOWERING QUICKLY THE MAST YOU CAN CLIMB ALMOST ANY SLOPE

SAFE TRANSPORTATION WITH A LOW CENTRE OF GRAVITY

QUICK AND EASY SET UP

TWO CROWD CYLINDERS PROVIDE MAXIMUM CROWD FORCE

meet your drilling needs

removable jib

compact mast

long boom

additional counterweight

crowd system

side tiltcylinders

fore/aft tilt cylinder

rigid guide

rotary drive

squareconnection

meet your drilling needs

Drilling on slopes andwith high side tilt

under severe overhead

Difficult access drilling

Long boom to drill over obstacles

Very low centre of gravity

Narrow spaces

meet your drilling needs

meet your drilling needs

DTC

30

DTC

50

DTC

80

torque 27 kNm

drilling depth 12.5 - 15 m

max pile diameter 800 mm

main winch line pull 35 kN

operating weight 8.8 tons

torque 47 kNm

drilling depth 19.5 - 29 m

max pile diameter 1200 mm

main winch line pull 80 kN

operating weight 14.5-16.5 tons

torque 82 kNm

drilling depth 31 m

max pile diameter 1500 mm

main winch line pull 120 kN

operating weight 24 tons

meet your drilling needs

TRANSPORT POSITION

DTC series is not just an excavatordrill attachment, it’s a rig fully integratedin the hydraulic and electric system.

Kelly guided in-mast guaranteesan excellent verticality in any condition

Its compact mast keeps theCG very low allowing higher manouvrability on sites

Based on reliable excavator basis built under Geax specifications permits lower fuel consumption and improved durability

meet your drilling needs

Simplified maintenance

Superb operator visibility

Diaphragm wall grab version

Drilling close to the wall

Customer care

Drilling on slopes

Geax is an italian company which designs and manufactures drilling and foundation machinery and equipment. Geax ‘s organisation is streamlined and efficient, enabling it to offer machines at a competiti-ve price and also to respond quickly to market needs. It was started up in 2006 by dr. Adriano Pesaresi, an engineer who already had twenty years’ experience as a designer in the sector. The new busi-ness initiative envisaged the production of drilling rigs which are inno-vative in structural terms, to make them compact, reliable, easy to use and highly efficient. A company working in the perforating sector for the building industry was set up in 2003 aimed at pinpointing the ne-eds of the industry and finding new solutions. Several years’ expe-rience in design combined with recent practical experience in worksi-tes have led to the production of models that have immediately won a large share of the market. All our machines start from the idea of increasing operational efficiency through dynamic design that is constantly measured against direct experience from continuous on-site tests. The DTC series, by adopting leading-edge solutions, represents a great step forward in a sector which has often been static and very conservative. On many sites our machines show outstanding versatility, quality, hourly productivity and ease of use compared with conventional drilling equipment. Innovation through acquired experience is fundamental to our working philosophy and all our products share this inspiration.

CEO ing. Adriano Pesaresi

www.geax.it

GEAX drilling equipmentvia Campoceraso n.13 Osimo (AN) ITALYtel. 0039 071 7131953fax.0039 071 715199write us at: info@geax.itwebsite: www.geax.it