Embed Size (px)
Citation preview
COMPACT COMPONENT SYSTEM
EX-A1Consists of CA-EXA1 and SP-EXA1
eI0100 0LODO000000
G00
00 0 0
II II
AUDIO/VIDEO
INSTRUCTIONS For Customer Use:Enter below the Model No. and Serial No.which are located either on the rear,bottom or side of the cabinet. Retain thisinformation for future reference.
Model No.
Serial No.
LVT1095-002A
[d]
Warnings, cautionsand others
G-1
CAUTIONTo reduce the risk of electrical shocks, fire, etc.:1. Do not remove screws, covers or cabinet.2. Do not expose this appliance to rain or moisture.
CAUTION - 0/I buttonI
Disconnect the mains plug to shut the power offcompletely (the STANDBY lamp goes off).The O/I button in any position does not disconnectthe mains line.
• When the system is on standby, the STANDBYlamp lights red.
• When the system is turned on, the STANDBYlamp goes off.The power can be remote controlled.
CAUTION• Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked bya newspaper or cloth, etc., the heat may not beable to get out.)
• Do not place any naked flame sources, such aslighted candles, on the apparatus.
• When discarding batteries, environmental problemsmust be considered and local rules or laws governingthe disposal of these batteries must be followed strictly.
• Do not expose this apparatus to rain, moisture, drippingor splashing and that no objects filled with liquids, suchas vases, shall be placed on the apparatus.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There areno user serviceable parts inside the unit; leave allservicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation
when open and interlock failed or defeated. Avoiddirect exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL,PLACED INSIDE THE UNIT.
CAUTUQN: TO REDUCE THE RUSK OF ELECTRUC SHOCK,
DO NOT REMOVE COVER (OR BACK).NO USER SERVUCEABLE PARTS UNSUDE.
REFER SERVUCUNG TO QUALUFED SERVUCE PERSONNEL.
The lightning flash with arrowhead symbol,within an equilateral triangle is intended toalert the user to the presence of uninsulated"dangerous voltage" within the product'senclosure that may be of sufficientmagnitude to constitute a risk of emectricshock to persons.
The exclamation point within an equilateraltriangJe is intended to alert the user to thepresence of important operating andmaintenance (servicing) instructions in theliterature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIREOR ELECTR|C SHOCK, DO NOT EXPOSETHiS APPLIANCE TO RAiN OR MOISTURE.
iNFORMAT|ONThis equipmenthas beentestedand found to compUywith theUimitsfor a CUossB digitaUdevice,pursuantto port 15 of the FCCRuUes.These Uimitsare designed to provide reasonabUeprotection ogoinst harmfuUinterferencein o residentioUinstaHation.This equipmentgenerotes,uses and can radiate rodiofrequencyenergy and, if not instafledand used inaccordoncewith theinstructions, maycouse harmfuUinterferenceto radiocommunicotions.However,there isno guaronteethatinterferencewill not occur in a particuUor installation.Ufthisequipment doescouse harmfuUinterferenceto radio or teUevisionreception, which conbe determined by turning the equipment offand on, the user isencouragedto try to correctthe interferencebyone or more of the followingmeasures:Reorientor reUocatethe receiving antenna.hcreose the separationbetweenthe equipmentand receiver.Connect the equipment intoan outUeton o circuit different fromthat to which the receiver isconnected.ConsuUtthe deoUeroran experienced rsdio/TV technicianforheUp,
For Canada/pour le Canada
CAUTION: TO PREVENT ELECTRIC SHOCK,MATCH WIDE BLADE OF PLUG TO WIDE SLOT,FULLY INSERT.ATTENTION: POUR EVITER LES CHOCSELECTRIQUES, INTRODUIRE LA LAME LA PLUSLARGE DE LA FICHE DANS LA BORNECORRESPONDANTE DE LA PRISE ET POUSSERJUSQUAU FOND.
For Canada/pour le Canada
THIS DIGITAL APPARATUS DOES NOT EXCEEDTHE CLASS B LIMITS FOR RADIO NOISEEMISSIONS FROM DIGITAL APPARATUS AS SETOUT IN THE INTERFERENCE-CAUSINGEQUIPMENT STANDARD ENTITLED "DIGITALAPPARATUS", ICES-003 OF THE DEPARTMENT OFCOMMUNICATIONS.CET APPAREIL NUMERIQUE RESPECTE LESLIMITES DE BRUITS RADIOELECTRIQUESAPPLICABLES AUX APPAREILS NUMIRIQUES DECLASSE B PRESCRITES DANS LA NORME SUR LEMATERIEL BROUILLEUR: "APPAREILSNUMERIQUES', NMB-003 EDICTEE PAR LEMINISTRE DES COMMUNICATIONS.
Note to CATV system installer:
This reminder is provided to call the CATV systeminstaller's attention to Section 820-40 of the NEC
which provides guidelines for proper grounding and, inparticular, specifies that the cable ground shall beconnected to the grounding system of the building, asclose to the point of cable entry as practical.
Table of contents
Introduction
Warnings, cautions and others .................... G-1Special cautions .............................................. 2About discs ...................................................... 3
Description of parts ......................................... 5
Getting started
Using the remote control ................................. 6Putting the batteries in the remote control .......... 6Operating the TV using the remote control ......... 7
Connecting up ................................................. 8
Basic operations
Playing discs ................................................. 12
Playback ........................................................... 12To switch the display ........................................ 13
Select what you want to play by usingthe number buttons ....................................... 14
To stop playback ............................................... 14To pause playback ............................................ 14
To advance picture frame-by-frame .................. 14Fast reverse/Fast forward search ..................... 14
Playing back from a position 10 secondsbefore (One Touch Replay) .......................... 15
Slow Motion Playback ....................................... 15Skip to the beginning of the selection ............... 15
To change the brightness of thedisplay window (DIMMER) ............................ 16
Adjusting the volume ........................................ 16Adjusting sound quality ..................................... 16
Turning off the sound temporarily (MUTING) ... 16
Advanced operations
Playing MP3 and JPEG discs ........................ 16
Resume Playback ......................................... 18
Select the scene to be played ....................... 19
Program Playback/Random Playback ........... 20
Repeat Playback ........................................... 22Other convenient functions ............................ 24
Selecting the subtitles ....................................... 24
Selecting the audio language ........................... 24Selecting a view angle ...................................... 24
Enlarging the picture (ZOOM) ........................... 25Adjusting the picture quality (VFP) ................... 2,5
Creating realistic sound(VIRTUAL SURROUND) .............................. 26
Adjusting playback level (DVD LEVEL) ............ 26Enjoying better pictures (PROGRESSIVE) ....... 26
Functions specific to DVD AUDIO ................. 27Playing the Bonus Group ................................... 27Browsable Still Pictures (B.S.P.) ....................... 27
Using the menu bar ....................................... 28Preferences ................................................... 29
Country/Area codes ....................................... 31
Listening to radio
Listening to a radio broadcast ....................... 32
Tuning in to a preset station .......................... 33
Convenient functions
Listening to the sound ofother audio device ..................................... 34
Auto Standby ................................................. 34Sleep Timer ................................................... 35
Tray Lock ....................................................... 35Using AV COMPU LINK ................................ 36
Reference
Troubleshooting ............................................. 37Language codes ............................................ 38
Specifications ................................................ 39
fHow to read this manual
• Operations are described by mainly using theremote control buttons. If there are the samemarks on the main unit, the buttons on the mainunit can also be used.
• The following marks tell you for which type of thediscs the operation can be made.
NN• The illustrations and TV screens may be different
between the actual case and the description.• "VCD" is an abbreviation of "Video CD".• "SVCD" is an abbreviation of "Super Video CD".
\
Special cautions
• Importantcautions
Installation of the system• Select a place which is level, dry and neither too hot
nor too cold; between 5°C and 35°C (between 41°Fand 95°F).
• Leave sufficient distance between the system and theTV.
• Do not use the system in a place subject to vibration.
Power cord• Do not handle the power cord with wet hands!• A small amount of power is always consumed while
the power cord is connected to the wall outlet.• When unplugging the power cord from the wall outlet,
always pull on the plug, not the power cord.
To prevent malfunctions of the system• There are no user-serviceable parts inside. If anything
goes wrong, unplug the power cord and consult yourdealer.
• Do not insert any metallic object into the system.• Do not use any non-standard shape disc (like a heart,
flower or credit card, etc.) available on the market,because it may damage the system.
• Do not use a disc with tape, stickers, or paste on it,because it may damage the system.
Label sticker
Sticker_
Note about copyright lawsCheck the copyright laws in your country beforerecording from DVDs, Super Video CDs (SVCDs), VCDsand CDs. Recording of copyrighted material may infringecopyright laws.
Note about copy guard systemDVDs are protected by copy guard system. When youconnect the system to your VCR directly, the copy guardsystem activates and the picture may not be played backcorrectly.
• Safetyprecautions
Avoid moisture, water and dustDo not place the system in moist or dusty places.
Avoid high temperaturesDo not expose the system to direct sunlight and do notplace it near a heating device.
When you are awayWhen away on travel or for other reasons for an extendedperiod of time, disconnect the power cord plug from thewall outlet.
Do not block the vents
Blocking the vents may damage the system.
Care of the cabinet
When cleaning the system, use a soft cloth and follow therelevant instructions on the use of chemically-coatedcloths. Do not use benzene, thinner or other organicsolvents including disinfectants. These may causedeformation or discoloring.
If water gets inside the systemTurn the system off and disconnect the power cord plugfrom the wall outlet, then call the store where you madeyour purchase. Using the system in this condition maycause fire or electrical shock.
• When condensationor water dropsadhere to the lens
In any of the following cases, condensation or waterdrops may adhere to the lens to prevent the system fromworking properly:• Immediately after roomheating starts• When the system is installed in a steamy or damp
space• When the system is suddenly moved from a cold place
to a warm spaceIn any of these cases, leave the system turned on for 1 or2 hours before use.
Check to be sure you have all of the suppliedaccessories.
The number in parentheses is the quantity of the piecessupplied. If anything is missing, contact your dealerimmediately.
• Remote control (1)• Batteries (2)• FM antenna (1)• AM loop antenna (1)• Power cord (1)• Composite video cord (1)• Speaker cords (2)
• Manufactured under license from Dolby Laboratories. "Dolby", "MLP Lossless", and the double-D symbol aretrademarks of Dolby Laboratories.
• "DTS" and "DTS 2.0+DIGITAL OUT" are registered trademarks of Digital Theater Systems, Inc.• Thispr_ductinc_rp_ratesc_pyrightpr_tecti_ntechn___gythatispr_tectedbymeth_dc_aims_fcertainU_S_patents
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of thiscopyright protection technology must be authorized by Macrovision Corporation, and is intended for home and otherlimited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering ordisassembly is prohibited.
2
Aboutdiscs Introduction
This system has been designed to play back the followingdiscs:DVD VIDEO, DVD AUDIO, VCD, SVCD, CD
This system can also play back the following discs:• Finalized DVD-R/RW discs recorded in the DVD
VIDEO format.• CD-R/RW discs recorded in the following formats- Music CDs (finalized discs)- VCDs- SVCDs
- MP3/JPEG discs recorded in ISO 9660 (for details, referto "About MP3/JPEG discs ")
However, some discs may not be played back because oftheir disc characteristics, recording conditions, ordamage or stain on them.Only sounds can be played back from the following discs:
MIX-MODE CD CD-GCD-EXTRA CD TEXT
Discs you can play:
Mark (Logo) Video RegionCodeFormat Number*DiscType
DVDVIDEO
DVDAUDIO
VCD
SVCD
CD
CD-R
CD-RW
_ NTSC l/ALL
AUDIO,VIDeO _ AUDIO
_ VtdeoCD NTSC
DIGITAL AUDIO
DIGITAL AUDIO
DIGITAL AUDIO
": Note on Region CodeDVD players and DVD VIDEOs have their own RegionCode numbers. This system can only play back a DVDVIDEO recorded with the Region Code number andvideo format mentioned above.
Examples:
@@If a DVD VIDEO with an improper Region Codenumber is loaded, "REGION CODE ERROR!" appearson the TV screen and playback cannot start.
• On some DVD VIDEOs, DVD AUDIOs, VODs or SVCDs,their actual operation may be different from what isexplained in this manual. This is due to the discprogramming and disc structure, not a malfunction ofthis system.
Discs that cannot be played back• The following discs cannot be played back:
DVD-ROM, DVD-RAM, DVD-RW (recorded in VRformat), CD-ROM, CD-I (CD-I Ready), Photo CD,SACD, etc.Playing back these discs will generate noise anddamage the speakers.
Damaged discs and discs in an extraordinary shape(other than a disc of 12 cm or 8 cm (43/4 inches or 31/8inches) in diameter) cannot be played back.
About MP3/JPEG discs
Playable MP3/JPEG discs and files• Discs recorded in the ISO 9660 format are playable
(except discs recorded in the "packet write" format(UDF format)).
• Discs recorded in the multi-session format are alsoplayable.
• Files with an extension of ".mp3," ".jpg" or ".jpeg"(extensions with uppercase and lowercase lettersmixed are also acceptable) are playable.
Notes on MP3/JPEG discs and files• A disc may not be played, or reading it may take a long
time depending on its recording conditions orproperties.
• The time needed for reading varies with the number ofgroups or tracks (files) recorded on the disc.
• If a character other than single byte English charactersis used in the file name of an MP3/JPEG file, the track/file name will not be displayed correctly.
• The order of tracks/groups displayed on the MP3Control screen, and the order of files/groups displayedon the JPEG Control screen may be different from thatof files/folders displayed on PC's monitor screen.
• In the case of MP3 discs, since groups/tracks areplayed in alphabetical order, an off-the-shelf MP3 discmay be played in an order different from that indicatedon the label attached to the disc.
• Playing an MP3 file including a still image may take along time. The elapsed time is not displayed untilplaying starts. If playing starts, the elapsed time maynot be displayed correctly.
• This system does not handle the ID3 tag of the MP3file.
• For an MP3 file, a disc with a sampling frequency of44.1 kHz and transmission rate of 128 kbps isrecommended.
• This system can play a baseline JPEG file, excludingmonochromatic JPEG files.
• This system can play JPEG data taken with a digitalcamera conforming to the DCF (Design Rule forCamera File System) standard (when a function isapplied such as the automatic rotation function of adigital camera, data goes beyond the DCF standard,so the image may not be displayed).
• If data has been processed, edited and restored withPC image editing software, the data may not bedisplayed.
• This system cannot play animations such as MOTIONJPEG, or still images (TIFF etc.) other than JPEG, andimage data with sound.
• The resolution of 640 x 480 is recommended for JPEGfiles. If a file has been recorded at a resolution of morethan 640 x 480, display may take a long time. Animage with a horizontal resolution of more than 2,400pixels cannot be displayed.
3
About discs (continued)
DVD VIDEOA DVD VIDEO consists of "titles" and each title
may be divided into "chapters".
4 Title 1 _,-_ Title 2 ._-
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
DVD AUDIO
A DVD AUDIO consists of "groups" and each groupmay be divided into "tracks".Some discs include a "bonus group" that requires apassword for playing (. - page 27).
< Group 1 _ _ Group 2 ._
Track 1 Track 2 Track 3 Track 1 Track 2
VCD/SVCD/CDVCD, SVCD and CD consist of "tracks".In general, each track has its own track number.(On some discs, each track may also be furtherdivided by indexes.)
Track 1 Track 2 Track 3 Track 4 Track 5
MP3 [JPEG] discsOn an MP3 [JPEG] disc, each still picture(material) is recorded as a track [file]. Tracks [Files[are usually grouped into a folder. Folders can alsoinclude other folders, creating hierarchical folderlayers.
This unit simplifies the hierarchical construction ofa disc and manages folders by "groups"
I_ Up to 99 groups
(1_ Group _-< Group _/1 2
[T_ileCkI [T_ilck_ Group3 Group 4 Group5
L Up to 150files
This unit can recognize up to 150 tracks [files[ pergroup and up to 99 groups per disc (up to 14,850files in total). Since the unit ignores the tracks[files] whose numbers are exceeding 150 and thegroups whose numbers are exceeding 99, theycannot be played back.• If there is any type of files other than MP3 [JPEG]
files in a folder, those files are also counted in thetotal file number.
4
Descriptionof parts Introduction
The numbers represent the page numbers.
Play/Pause: 12, 14
34
Look at "Display window" below.
11,12 II
STANDBY/ON:12 [
Open/Close:12 [Headl jack* I
14 14 14Disc tray: 12
Remote controlsensor: 6
-- VOLUMEcontrol: 16
* Connect a pair of headphones (commercially available) with a stereo mini plug. If the headphones areconnected, the speakers and subwoofer will not produce any sound.
,,,,,,,,,,,,32,,,,,,,,,,,32,_,,,,,,,,,,,34,,,,,,,,,,,,,27
27
10 10 10
I DIGI
1111 I_1 ''"'"" d(
'T] ........................ ""_
UT_
V GC
Region Code Number:
36 11
,_IDEOOU-
8 8
_M75_ AM EXTCOAXIAL
(ooCooling fan (inside)The fan rotates and stops automatically.This discharges heat generated inside the unit.Do not cover up these holes.
5
Usingthe remote control
The numbers represent the page numbers.
Batteries (2)
33,34 II 1610
If the range or effectiveness of the remote controldecreases, replace the batteries. Use two R6P(SUM-3)/AA(15F) type dry-cell batteries.
CAUTION
• Do not use a used battery and a new batterytogether.
• Do not use different types of batteries at thesame time.
• Take out the batteries if the remote control is not
to be used for a long time. Otherwise it maycause a leakage.
Remote control operation
When operating the remote control, point ittowards the front panel of the main unit. If theremote control is operated from a direction that isextremely oblique or when there is an obstacle inthe way, signals may not be transmitted.
If the remote control sensor is exposed to a stronglight such as direct sunlight, correct operation maynot be carried out.
6
This page is for when operating your TV using theremote control of this product.
TV/VIDEO
TVCHANNEL TVVOL
@
@
TV RETURN 100+
Numberbuttons
Setting the manufacturer's code
Slide the remote control mode
selector to the TV side.
AUDIOTv [_] !
2 Keep pressing down O/ITV.
NOTE
Keep pressing down 0/I TV until Step 4 is complete.
3 Press ENTER and release.
Getting started
4 Press number buttons (1-9, 0).
Examples:For a Hitachi TV: Press 1, then O.For a Toshiba TV: Press O, then 8.
If there are more than one manufacturer's codes,try them in turn and select the one that causes the_roduct to work properly.
Manufacturer Code Manufacturer Code
JVC 01 Samsung 12
Hitachi 10 Sanyo 13
Magnavox 02 Sharp 06
Mitsubishi 03 Sony 07
Panasonic 04, 11 Toshiba 08
RCA 05 Zenith 09
5 Release ©/ITV.
ForTV operation
Operate the remote control by pointing it towardsthe TV.
7v Turn ON/OFF the power.
TVCHANNEL Change channels.
+=iTVVOL Adjust volume.
AUDIO_ # Select channels.100+ TV
TVRETURN Alternates between thepreviously selected channeland the current channel.
W/VIDEO Switch TV and video input.
"1 Make sure to slide the remote control modeselector to the TV side in advance.
NOTE
When the batteries are replaced, perform themanufacturer's code setting again.
7
Connecting up_oonotturnonthepoweruntiltheconnectioniscomplete-
Connecting AlVlloop antenna (supplied)
| Set up the AM loop antenna.
'2 Connect antenna cords.
Main unit(rear panel)
If the antenna cord iscovered with vinyl on thetip, twist and pull the vinyloff and remove.
3 Turn the AM loop antenna to the direction of the
best radio reception.Locate the AM loop antenna as far away fromthe main unit as possible.• Do not locate the AM loop antenna on a metallic
table or close to a TV, personal computer, etc.Otherwise it may result in bad radio reception.
• When good radio reception cannot be
obtained with the supplied AM loop antenna
Electric wire: 3 - 5 m (9 feet 10 inches - 16 feet5 inches) (commercially available)
Electric wire
horizontally,| f AM loop preferablyatahigh/ _ antenna place such as
above a window oroutdoors.
LOOPIConnect the AM loopMain unit antenna cords together.
(rear panel)
Connecting FlVlantenna (supplied)
Main unit(rear panel)
Put the antenna up straight in the direction wherethe best radio reception can be obtained, and fixby using tape.
i ¸_
0ooo
• Whengoodradio receptioncannotbeobtained with the suppliedantenna or whenusinga communalantenna
Antennacord(soId Communalseparately) antenna terminal
or OutdoorFMantennaY
C0A×IA_ available)
Coaxial cableMain unit Converter (commercially
(rear panel) (sold separately: available)compatible with 300_/75'_)
Depending on the radio receptionconditions, an FM feeder antenna (soldseparately: compatible with 300_) canbe used. In the case, a converter (soldseparately) is required.
For details of connecting a separately soldantenna, refer to the user guide for the antennaor converter.
8When positioning the antenna, listen to an actual radio program (refer to "Listening to a radio broadcast" on page 32).
Getting started
There is no difference between the left and right
speakers.
SpeakerSpeaker terminal cord
+j+dSpeaker cord
(supplied)
Withoutblack line
With black
d® @
Main unit
(rear panel)
Right speaker(rear panel)
-- Speaker cord(supplied)
........',/_ Without black line
With black line
II R /Speaker
_ Speaker terminal _/cord
Left speaker(rear panel)
CAUTION
• DO NOT connect more than one speaker to one
speaker terminal.
• The speakers of this product are magneticallyshielded, but color irregularities may occur onthe TV depending on how the speakers areinstalled. Keep in mind the following.1. Turn off the main power of your TV before
installing the speakers. Wait for about 30minutes before turning on the TV again.
2. If color irregularity occurs in pictures, keep adistance of more than 10 cm (315/16 inches)between the TV and the speakers,
TThespeakers employ natural wood for the
iaphragm and the cabinet in order toreproduce the original sound faithfully.
he appearance will therefore be different foreach unit.
Speakercovercan be detached.
I/ F'speake,JcZl. ...... _. =._[ cover
J
NOTE
• Impedanceofspeakerthatcanbeconnectedtothemain unit is within a range of 4.Q to 16.(2.
• In order to have a sufficient cooling effect, leave a
space of more than 1 cm (3/Mnches) between themain unit and the speakers or ether objects.
9
Connecting up (continued) - Do notturn on the power until the connectionis complete-
This page is for when connecting the main unit withother devices.
Connecting subwoofer
With an amplifier-built in subwoofer (sold separately), you can enjoy a more dynamic bass sound.Refer to the manual of the subwoofer for details.
Amplifier-built-in subwoofer(sold separately)
Audio cord (sold separately)(If an audio cord comes with the amplifier-built-in subwoofer,you can use the cord.)
10
S.WFROUT
Connecting with other audio device
/ AUDIO OUTR L
®® Other audio Idevice
L_J
Audio cord (sold
_ separately)
Main unit
When you want to hear sound from the subwoofer,press S.WFR OUT on the remote control to display"SUB WFR ON" (Sub Woofer ON) on the displaywindow on the main unit. Each time you press thebutton, the display toggles between "ON" and "OFF".
NOTE
When "SUB WFR ON" is selected, bass sound fromthe left and right speakers will be automaticallylowered and the bass sound will be emitted mainlyfrom the subwoofer.
Connecting with a digital device
[_""_ I Digital device(MD recorder etc.)l
f _ To digital input terminal
Optical digital cord/ (sold separately)
UDIGITALOUT
[ PCM/
ISTREAM
Main unit [ h_'/_
CAUTION
• For details of signals to be output, refer to page30.
• If connecting the main unit with equipment with thefunction of a Dolby Digital decoder, the setting in"D. RANGE COMPRESSION" of "AUDIO"( page 30) will be invalid regarding sound fromthe digital audio output of the main unit.
Getting started
TVSupplied composite video cord Main unit
CAUTION
Connect the main unit directly with a TV (or amonitor) without routing through a VCR.Otherwise it may cause picture distortion whileplaying.
Connecting directly
Also, when connecting the main unit to a TV witha VCR built in, there may be picture distortionwhile playing.
You can enjoy pictures of better quality using thefollowing cord instead of the supplied video cord.
Connecting by using the S-Video cord
TV S-Video cord(sold separately)
S-VIDEO IN J Main unit
s _
Connectingbyusingthecomponentvideocord
You can enjoy better quality pictures than whenusing the S-Video cord.
TV
/ Component video cord(sold separately)
Main unit
CAUTION
Use one of either the S-Video cord or the
component video cord. If both cords are used,pictures may not be played properly.
NOTE
• In order to enjoy pictures with Progressive mode(. page 26), the TV is required to ha ve Progressivevideo input•
• If the component video input jacks of your TV areBNC type, use a plug adapter (not supplied) toconvert the plugs•
AC outlet
t Supplied power cord Main unit
_AC IN
• Connect the power cord after all otherconnections are complete.
• The STANDBY lamp (on the front panel) will belit.
11
Playingdiscs
_ _ _ _ (Refer to page 16 for playing MP3 and JPEG.)
- page 5 Place a disc with the label sideJ .............................................facing up.
J • Place an 8 cm (31/8 inches)
disc in to the hollow part inthe center.
Press O/I AUDIO.• The power will be turned on and the STANDBY
lamp will go off.• Press O/IAUDIO again to turn off the power.
2 Press _OPEN/CLOSE to open the disctray to load a disc.
3 Press I_(play).The disc tray will close and playback will start.
_-/11
• The power will be turned on when any of O,
_O_, 6 or Q on the main unit and _,
_ (_ or °PE_°s_, on the remote control ispressed while the power is off.
If any button other than --Q or oP_osEispressed, the source will also be changed (ifthere is a disc loaded, playback will start).
NOTE
• A menu screen may be displayed after startingplayback of a DVD. In this case, select a desireditem to playback by using the following buttons onthe remote control.
• Selecta desireditem using C3C_ _ (_ and"xJ _/
press ENTER• Select a desired item using the number buttons.
• Depending on the disc, actual operation may bedifferent from the description.
JVC
NOW READING
REGION CODEERROR!
NO DISC
OPEN
CLOSE
The following messages appear depending on the status of the system.(When FM/AM or AUX is selected as a source, the messages do not appear.)
Appears when the system is reading the disc information. Wait for a while.
Appears when the Region Code of the DVD does not match the code thesystem supports. (- page 3)
Appears when no disc is loaded.
Appears when opening the disc tray.
Appears when closing the disc tray.
12
UPPER
LOWER
©
Display window during disc playback
Example: When a DVDVIDEO or DVDAUDIO is played
j_:'j :._ j_:'j j_::j :.:. j_:'j ":;._-Elal_sed.
•....., ........,... ....,"...'Jplay=ngt_me/izlnzlzlZ m--m
;..'; ; | Chapter/Track•..." .-'. J number
If "BONUS" or "B.S.R" is displayed during a DVDAUDIO playback, refer to page 27.
Example: When a SVCD or VCD is played
F' JiiiI (ii: i_-Tracknumber
/0 :[• PBC (Play Back Control): A signal recorded in a
VCD (version 2.0) for controlling playback. It ispossible to enjoy interactive software or softwarewith a search function using a menu screenrecorded in a PBC compatible VCD. To play adisc with the PBC function OFF, carry out thefollowing operations.• Designate the track number using the number
buttons while the disc is stopped.• Designate the track number using _-_ or _1
while the disc is stopped, and then pressD,-(play).
• Press RETURN to go back to the upper layerduring the PBC playback of a VCD or SVCD.
Example: When a CD is played
! ;;;; ?!i_::'_Jl-elap see
•.. [; ...... / playing time
i""i i JTraeknumbermmm mmm j
Basic operations
Example: When an MP3 disc is played
...............• "". .-" playing hme
;.."; ; JTrack number• .... .-% J
Example: When a JPEG disc is played
Group number _ File number
[i"j:::''"'"•. ".::i
Press UPPER or LOWER. Each time you pressthe button, the display will be alternated.
Display examples
DVD VIDEO
UPPER:r_o:oo:o3(Elapsedplayingtime) _ T1 C3 (Title and Chapter number)/ No display4 J
J
DVD AUDIO
UPPER: r_O:OO:O3(Elapsedplayingtime)_ G1T3(GroupandTracknumber)! No display,_ J
LOWER:r_03(Track number) _ G1 (Group number)-,,,,,,,,,,_DVD1 J
VCD/SVCD
UPPER: r_O:O3 (Elapsed playing time) _ NodisplayL-pBC 2 PBC and Track number appear only
when PBC funct on s payed)
CDUPPER: r,_0:0S(Elapsed playing time)
1
MP3 disc
VCDJ
NodisplayJ
_*CDJ
UPPER: F4_0:00:03(Elapsedplayingtime)_ G1 T3 (Track number)! No display4 J
LOWER:--[¢'G1(Group number) =4_MP3 _ 03(Track number)j
JPEG disc
UPPER: r4_G1 F3 (Group number and File number) --¢, No display/ J
LOWER:JPG
NOTE
Abbreviations
G: GroupT: Title (DVD VIDEO)
Track (DVD AUDIO and MP3)C: ChapterF: File
13
14
Playing discs (continued)
DIMMER
i/f%©
GROUP/TITLE MUTING
/ / AUDIO VOL
_ iI
AUD,O
@ SLOW SLOW @
t
_ii_i_ :_ _ ' >_!_iBASS TREBLE
iil
(Play button)
Cursor(A/.)
Numberbuttons
NOTE
• Set the remote control mode selector to
AUDIO before using the number buttons.• For a VCD or SVCD, this operation can be carried
out when the disc is stopped, or during playbackwithout the PBC function.
• Fora DVDAUDIO, CD, MP3orJPEG, this operationcan also be carried out when the disc is stopped.
• This operation may not be carried out for somediscs.
Designate the chapter number ortrack number to play duringplayback.Refer to "How to use the number buttons" on page15.
Press • during playback.
Press I! during playback.To resume normal playback, press m,-(play).• Press II to pause during JPEG disc slide-show.
Press _(play) to start playback from the next file.
• It is not possible to pause by pressing I_/11 onthe main unit during JPEG disc slide-show.
Press II during pause.Each time you press the button, picture will beadvanced frame-by-frame.
There are two methods.
• Press -,=_or _=,- during playback.Each time you press the button, the speedincreases (X2, X5, X10, X20, X60). To restorethe normal speed, press _(play).
• Hold down I_-,= or =,-_1.Fast reverse/Fast forward search can be carriedout only while the button is pressed (X2-_X5).
NOTE
• Fast reverse/Fast forward search cannot be carriedout for MP3 and JPEG.
• For a D VD VIDEO, SVCD or VCD, no sound comesout during fast reverse/fast forward search.
• For a CD or DVD AUDIO, sound is intermittent
during fast reverse/fast forward search.
Basic operations
Press c" during playback.
NOTE
• This operation may not be carried out for somediscs.
• It is not possible to go back to the immediatelyprevious title.
Press SLOW • or SLOW 0 duringpause.• Each time you press the button, the speed
increases.
• Press n to pause playback, and press _(play) toresume normal playback.
NOTE
• No sound will be produced.• The picture motion in the reverse direction may not
be smooth.
• For a VCD or SVCD, Slow Motion Playback can becarried out in the forward direction only.
Press I_ or _1 during playback*.• Each time you press the button, the previous or
next beginning of chapter/track/file to the currentposition will be skipped to.
• Press _41 once to skip back to the beginning ofthe chapter or track currently being played(except for JPEG).
• Press GROUP/TITLE >>tor t<<to select the title
or group.• During playback of a JPEG disc, press _,.D,.Ior
cursor • to play the next file, or press _-_ orcursorA to play the previous file.
NOTE
* Fore VCD orSVCD, this operation can be carried out
during playback without the PBC function.• Exceptfora DVD WDEO, thisoperationcanalsobe
carried out while the disc is stopped.
• This operation may not be carried out for somediscs.
How to use the number buttons
Examples: 5: _ 15: _
20: @_@ 25: @_@_(_(_(_(_(_(_(_(_(_
D : Play
: Pause
: Fast reverse/Fast forward search
_'10 : Slow Motion Playback (reverse/forward directions)
: Containing multi-angle views(:- page 24)
0)) : Containing(-page 24)multi-audio languages
: Containing multi-subtitle languages(:- page 24)
Q : The disc cannot accept the operation youhave attempted. 15
Playing discs(continued) PlayingIVIP3andJPEGdiscs
Press DIMMER repeatedly.• The modified brightness will be stored even after
the power is turned off.
The items below can be carried out for all sources.
Press AUDIO VOL +/-.
NOTE
The volume can be adjusted by turning the VOLUMEcontrol on the main uniL
Bass: Press BASS +/-.Treble: Press TREBLE +/-.
Press MUTING.• No sound will come out from the speakers,
headphones and the subwoofer.• Press MUTING again to restore the sound.
When the power is tuned off once and turned onagain, the sound will be restored.
GROUP/TITLE
/2%
AUDIO
_,_
i;_i_!iii_i__i;,+___ !i!
+IIi
_,,-(Play button)
]t
l
Cursor(A/'v/.,t/_)/ENTER
o Numberbuttons
NOTE
Set the remote control mode selector to +°,oI_{UIAUDIO before using the number buttons. _
16
Advanced operations
Display of an MP3 disc is described here as anexample.For a JPEG disc, read "track" as "file".
NOTE
When playing a disc containing both MP3 and JPEGfiles, set one of them to be played (.page 29).
1 Load adisc.
Elapsed time of the track currently beingTV screen played (MP3 only).
MP3CONTROL
Gr0up : 1 / lfJ
_ ..;i....................iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
TGroup list
Selected group
Track:1 / 6 (T0ta128)
begonia
_i ¸_
Track list (Tracksincluded in theselected group)
Selected track
Press cursor A/T to select a
group.
3 Press cursor =.- to move to thetrack list.
• Press cursor -,9 to go back to the group list.
4 Press cursor &IT to select a
track.
Press I_(play) or ENTER.
NOTE
• GROUP/TITLE I<<, >>1can also be usedin Step 2.• The number buttons can also be used in Step 4. In
this case, Steps 3 and 5 are not needed. (For how
to use the number buttons, refer to page 15).• I_ or m,.B,.ican also be used in Step 4. In this case,
Step 3 is not needed.
1 Press REPEAT while the disc is
stopped.Each time you press the button, the Repeattype will be alternated.
Display on the displayRepeat types Display on the TV screen window on the main unit
Repeats the current REPEAT TRACKtrack (only for MP3), (_
Repeats the current REPEAT GROUP
group,
Repeats the entire REPEAT ALLdisc (_ ALL
Cancels repeat No display No display
Repeats the current trac_ REPEAT STEP (_during a Program or
Random Playback (only
for MP3).
Repeats afl programmed REPEAT ALL _ ALLtracks or the all tracks for
Random play (only for
MP3).
:_: : represents blinking
2 Press I_(play).
NOTE
• The Repeat types can be changed during playback.• The Repeat mode will be automatically cancelled if
there is a file that cannot be played (.. page 3).
lide-Show PlaybackIn Step 5, for a JPEG disc, when _,,-(play) is pressed, files will be continuously played from the selected
• file (Slide-Show Playback), and when ENTER is pressed, only a selected file will be played.Display time for a file in Slide-Show Playback is about 3 seconds.
• When all files are played through, the playback will be automatically stopped.
17
ResumePlayback
When playback is stopped in the middle, playbackcan be started from the stopped scene.This is called Resume function.
0/_ AUDIO
FM/AM AUX
_(Play button)
How to suspend playbackPerform any of the following operations duringplayback.
Press • once.*
Press O/I AUDIO to turn off the power.
Change the source to FM/AM or AUX.*
Even if the power is turned off by pressingO/IAUDIO after this, the position where playbackhas been stopped will be stored.
To start playback from the storedposition
Press I_ (play).
NOTE
• This function does not work in Program Playback orRandom Playback.
• The position where playback starts again may be alittle different from the stopped position.
• When a disc menu is displayed, the Resumefunction may not work.
• The audio language, the subtitle language and theangle at that time are stored as weft as the stoppedposition.
• The stored position will be cleared if the disc tray isopened. Further, if • is pressed during playback,"RESUME" will be displayed. If • is pressed at thistime, "RESUME OFF" will be displayed and thestored information will be cleared.
• At the time of purchase, Resume is set to ON.Resume can be set to OFF (.. _page 30).
18
Selectthe sceneto be played Advanced operations
AUDIO
Cursor(A/v/-_/_)/ENTER
Numberbuttons
NOTE
Set the remote control mode selector to _Jo,oI_AUDIO before using the number buttons, v
2
Press MENU or ToP MENUwhile the disc is stopped orduring playback *_.The disc menu screen will be displayed.
Press cursor A/T/4/_-(only fora DVD VIDEO or DVD AUDIO) orthe number buttons to select
the scene to be played.• Refer to "How to use the number buttons"
(: -" page 15).
• When the menu screen has a couple of
pages, press _4 or _,-I to change the
page (only for a VCD and SVCD).
3 Press ENTER.
without a menu screen.
• Playback may start for some discs without pressingENTER.
1 Press ON SCREEN twice during
playback .2.The menu bar will be displayed (_ page 28).
2 Press cursor_/P- to select ._J.
3 Press ENTER.
4 Input the time .3 using thenumber buttons (1-9, 0).
• Input "hours", "minutes" and "seconds" for aDVD VIDEO and DVD AUDIO, and input
"minutes" and "seconds" for a CD and VCD."minutes" and "seconds" can be omitted.
Example: When you want to play a DVDVIDEO from the position of (0hour) 23 minutes 45 seconds,
press the buttons in the order:
• If you input wrong numbers, press cursor4to delete the numbers and re-input.
Press ENTER.To delete the menu bar, press ON SCREEN.
NOTE
• This function does not work fora DVD VIDEO withno time information recorded.
• This function does not work during Program or
Random Playback..2 For a CD, this operation can always be carried out,
while, for a VCD, the operation can be carried outwhen the disc is stopped or during playback withoutthe PBC function.
.3 Time search for a DVD VIDEO is from the beginningof the title, for a DVD AUDIO from the beginning ofthe track being played. Time search for a VCD anda CD is as follows:• When the disc is stopped, time search is from the
beginning of the disc.• When the disc is being played, time search is
within the track currently being played.
NOTE
*_ For a VCD and SVCD, this operation can be carried
out only when the PBC function is off.• This operation cannot be carried out for a disc
19
ProgramPlayback/RandomPlayback
(Play button)
CANCEL
/f % _ ",', m .4
PLAY MODE
IC q i¸ C J ii; U ¸¸i il
__i _ iiiiii_iill_ '!IZ_Iii,!_ii
,-Numberbuttons
It is possible to program a maximum of 99 chaptersor tracks. The same chapter or track can beprogrammed more than once.
1 While the disc is stopped, press
PLAY MODE repeatedly todisplay "PRGM" on the displaywindow on the main unit.
"PRGM" is an abbreviation for PROGRAM.
Example: For DVD VIDEO
PROGRAM _\ TV screen
NO Gr o_J_i'r;_e r _okio_pte
1 I II2 i II3 I II4 F Jl
s r 1[6 I.....................I[7 I.................I[8 I II
-- -Programscreen
2 Create a program following thedescription on the TV screen.Refer to "How to use the number buttons"
(:- page 15).
• The input content varies depending on thedisc type.• DVD VIDEO: Titles and chapters• VCD, SVCD, CD: Tracks• DVD AUDIO, MP3: Groups and tracks
• To select a DVD AUDIO bonus group, carryout the operations of "Playing the BonusGroup" on page 27 in advance to erase thedisplay "BONUS".
• If the number of chapters or tracks input isgreater than 99, "FULl" will be displayed.
• In the case of a CD, SVCD or VCD, whenthe total playback time reaches 99 minutes59 seconds, "--:--" will be displayed on thedisplay window (It is possible to continueprogramming).
2O
NOTE
Set the remote control mode selector to , D,o[_y!AUDIO before using the number buttons.
Toprogramon the displaywindow on the mainunit, operate as follows.(1) Select a title/group using the number
Advanced operations
buttons.Display example of the upper displaywindow: T2 C--
(2) Designate a chapter/track number using thenumber buttons.
Display example of the upper displaywindow: T2 C3• Refer to "How to use the number buttons"
(: -" page 15).• The program number will be displayed on
the lower display window (Example: "P2").
(3) Repeat the above operations (1) and (2) to
1 Press PLAY MODE repeatedly
to display "RANDOM" on thedisplay window on the main unitwhile the disc is stopped.• "RANDOM" will also be displayed on the TV
screen.
2 Press I_(play).
complete the program. Then, advance toStep 3.
3 Press I_(play).• To resume normal playback, press PLAY
MODE repeatedly to display "NORMAl" onthe display window on the main unit whilethe disc is stopped. The program contentwill not be erased.
• The following operations erase the programcontent.• Hold down CANCEL until "CLEAR!"
appears on the display window with theprogram preference screen displayed (ifCANCEL is pressed and releasedquickly, programs will be erased one byone).
• Open the disc tray• Turn off the power
• The same chapter or track will not beplayed twice.
• To resume normal playback, press PLAYMODE repeatedly to display "NORMAl" onthe display window on the main unit whilethe disc is stopped.
• Random Playback will also be cancelled bycarrying out the following operations.• Open the disc tray• Turn off the power
• The previous track will not be returned toeven if I,<-.11is pressed repeatedly duringRandom Playback (the beginning of thecurrent chapter or track will be returned to).
21
22
Repeat Playback
Refer to page 17 for Repeat Playback of MP3 andJPEG files.
REPEAT
U C, n
!'i)i,i:ii_i
_Cursor
/ENTER
Press REPEAT during playback.Each time you press the button, the Repeattype will be alternated.
Example:
TV screen
For DVD VIDEO
Display window on the main unit
C
Repeat types Display on the TV Display on thescreen main unit
Repeats the current r_-._CHAP. C
chapter L==J
Repeats the current _r'_ ,_TITLEtitle
Cancels repeat _J OFF No display
For DVD AUDIO
Repeat types Display on the TV Display on thescreen main unit
Repeats the current _ TRACK Ctrack
Repeats the current __.JGROUP C;ALL i"group
Cancels repeat _..JOFF No display
........ represents blinking_
For CDNCD/SVCD
Repeat types Display on the TV Display on thescreen main unit
Repeats the current _ TRACK Ctrack
Repeats aJl tracks _J ALL C ALL
CanceJs repeat _i) OFF No display
NOTE
• For a DVD AUDIO and CD, this operation canalways be carried out, while, for a VCD and SVCD,the operation can be carried out when the disc isstopped or during playback without the PBCfunction.
• It is possible to set Repeat on the menu bar. Forhow to operate, refer to "Playing the designated partrep ea te dly (A -B Repeat Playback) "(. page 23).
• The abbreviations displayed on the main unitare asfollows.
TRK : Track
CliP : ChapterTI. : Title
GR. : Group• For a DVD VIDEO and DVD AUDIO, if the source is
switched to FM/AM or A UX, the Repeat mode will becancelled.
Repeat Playback during Program orRandom Playback
Repeat types Display on the TV Display on thescreen main unit
Repeats the current _i} STEP
chapter or track or CREPEATSTEP
Repeats all _ ALLprogrammed tracksor all the tracks in or C ALL
Random Playback REPEAT ALL
[__=J OFF
Cancels repeat or No display
No display
1 Press ON SCREEN twice during
playback.The menu bar (- page 28) will be displayed.
2 Press cursor_/_to select
3 Press ENTER.
4 Press cursorA/Tto displayA-B i"
Other Repeat modes can be selected here.For other Repeat modes, refer to "Playing thetitle/chapter/group/track/all tracks repeatedly(REPEAT)" (. _ page 22).
5 Press ENTER at the start point
of the part to be repeated(designating A point).
• The icon on the menu bar will be
6 Press ENTER at the end point of
the part to be repeated(designating B point).• The icon on the menu bar will be
C will appear blinking on the displaywindow on the main unit and the partbetween A and B points will be playedrepeatedly.
• A-B Repeat Playback will be cancelled bycarrying out the following operations.• Press m.
• Select Bj and press ENTER twice.
NOTE
A-B Repeat Playback is possible only within the sametitle or track. A-B Repeat Playback cannot be carriedout during PBC playback, Program Playback, RandomPlayback and Repeat Playback.
Advancedoperations
23
Other convenientfunctions
i i AUDIO SUBTITLE ANGLE
o Cursor(A/v/.,t/_)/ENTER
ZOOM
(only for moving image)
Press SUBTITLE duringplayback of a disc containingsubtitles in several languages.
Example: TV screen
1 Press AU DIO during playback ofa disc containing several audiolanguages.
Example: TV screen
2
• Each time you press the button, the audiolanguage will be alternated. Also, the audiolanguage can be changed by pressingcursorA/v.
• For a language code such as "AA', refer to"Language codes" (_." page 38).
• "ST", "1" and "R" displayed when playing aVCD or SVCD respectively represent"Stereo", "left sound" and "right sound".
Wait for a few seconds or pressENTER.
NOTE
It is possible to operate by using the menu barpage 28).
2
3
• Each time you press the button, the subtitlewill be alternated between ON/OFF.
Press cursorA/_'to select a
subtitle language.• For a language code such as "AA", refer to
"Language codes" (: _ page 38).
• The manner of displaying subtitlelanguages may be different depending onthe disc.
Wait for a few seconds or pressENTER.
NOTE
• It is possible to operate by using the menu bar(.page 28).
• For a SVCD, each time you press SUBTITLE in
Step 1, the subtitle type and ON/OFF will bealternated.
1(only for moving image)
Press ANGLE during playbackof a scene containing multi-viewangles.
Example: TV screen
2
• Each time you press the button, the anglewill be alternated. Also, the angle can bechanged by pressing cursorA/v.
Wait for a few seconds or pressENTER.
NOTE
It is possible to operate by using the menu barpage 28).
24
BW BW
2
Advanced operations
(only for moving image)
Press ZOOM during playback orwhile paused.• Each time you press the button, the picture
magnification will be changed (X1.5 onlyfor a VCD and SVCD).
Select the portion you want tosee by using cursor A/v/_/_-.
• This operation cannot be carried out whenthe magnification is Xl.
• To resume normal playback, select Xl inStep 1.
3 Press cursorA/Tto select an
item to be adjusted.
4 Press ENTER.
Example: TV screen
5 Press cursorA/_'to change thevalue.
6 Press ENTER.
To adjust other items, go back to Step 3.
1 Press VFP.
NOTE
• If no operation is made for several seconds duringthe procedure, the settings made so far will beautomatically stored.
• "VFP" is an abbreviation of "Video Fine Processor".
Press VFP during playback orwhile paused."VFP SET" will appear on the display windowon the main unit and the current setting will bedisplayed on the TV screen.
+o ]
Gamma: Controls brightness of neutral tintswhile maintaining brightness of dark andbright portions.
• Sharpness: Controls screen sharpness.
2 Press cursor_/=-to select VFP
mode.
• It is recommended to select "NORMAl"usually, or "CINEMA" in a dark room. Wheneither "NORMAl" or "CINEMA" is selected,go to Step 7.
• When either "USER 1" or "USER 2" isselected, the adjustment can be carried outin detail in the operations after Step 3.
25
Other convenient functions (continued)
PROGRESSVE
VIRTUALSURROUNC
DVD LEVEL
types of disc. If the difference is not to your liking,adjust the DVD Level.
1 Press DVD LEVEL duringplayback.• Each time you press the button, the level
will be alternated among "NOR" (Normal),"MID" (Middle) and "HIG" (High).
• Select the level while listening to the soundplayed.
NOTE
• DVD Level is effective only forplayback ofa DVD.• Even if the DVD Level is changed, the output level
from the digital audio output terminal will not bechanged.
• This operation can be carried out while the disc is
stopped or paused.
26
NOTE
Virtual Surround can be set only for multi-channelsound (AC3, LPCM, PPCM and DTS). VirtualSurround cannot be set for2 channel audio such as
PCM stereo or Dolby Surround.
1 Press VIRTUAL SURROUND
during playback.Example: TV screen
OFF
• Each time you press the button, the Surroundmode will be alternated between ON/OFE
• When ON, "SURROUND" appears on thedisplay window.
• When switching the Surround mode, thesound will be intermittent.
NOTE
• Virtual Surround is effective for the speakers andheadphones.
• "V.SUR." displayed on the display window is anabbreviation of "Virtual Surround".
The audio of a DVD VIDEO and DVD AUDIO maybe recorded at a lower level (volume) than for other
In the Progressive mode, better pictures can beenjoyed.
CAUTION
• In order to enjoy pictures in the Progressivemode, the following requirements should be met.• There must be a component video input terminal
on the TV set connected to the main unit.• The main unit and the TV set must be
connected using a component video cord(: page11).
When the above requirements are not satisfied,leave the main unit in the Interlacemode. If the
Progressive mode is set, pictures maybe distorted.
NOTE
Progressive mode:All scanned lines will be displayed at once. Picturesof higher resolution than those in the Interlace modecan be realized.
Interlace mode:
This is a conventional image method. Half of thescanned lines displayed in the Progressive modewill appear, alternating with the other half.
Display "PROGRESS" by holding
down PROGRESSIVE during
playback or while the disc is stopped,or when there is no disc loaded.• Each time you hold down the button, the mode
will be alternated between the Progressive modeand the Interlace mode.
• The display window displays "PROGRESS"when in the Progressive mode, and "INTER."when in the Interlace mode.
Functionsspecificto DVDAUDIO Advanced operations
NOTE
Set the remote control mode selector to ..... I_AUDIO before using the number buttons, v _4I
GROUF TITLE
AUDIO
@
_i.........._1 > _/¸!I
,@
iiiiii
ill i
!!
!i
ii!
.Cursor(A/T)/ENTER
Numberbu_ons
There are some DVD AUDIO discs with a specialgroup, called "Bonus Group", recorded.
NOTE
This operation can be carried out when "BONUS'is liton the display window on the main unit.
1 Press GROUP/TITLE >>l
repeatedly during playback toselect a bonus group."KEY " appears on the TV screen, andon the display window on the main unit.
L Press the number buttons to
enter a pin code (4 digits).The method of getting a pin code may bedifferent depending on the disc.
3 Press ENTER.
• When a correct pin code is entered,"BONUS" disappears and the playback ofthe bonus group starts.
• If an incorrect pin code is entered, tryentering a correct pin code again.
There are some DVD AUDIO discs with stillpictures recorded. Among the still pictures, thereare pictures called B.S.R (Browsable StillPictures). With these pictures, it is possible toswitch a picture as if turning over pages.
NOTE
This operation can be carried out when "B.S.P. "is liton the display window on the main unit.
1 Press PAGE during playback.Each time you press the button, the still picturewill be switched over. It is also possible toswitch the picture using cursor A/v.
Example: TV screen
2 Wait for a few seconds or pressENTER.
27
28
Usingthe menubar
°Cursor(A/T/4/_)/ENTER
ii
Number
buttons
NOTE
• Set the remote control mode selector to ..... I_
AUDIO before using the number buttons. _ U!• This operation can be carried out when there is a
disc loaded. There are some functions that may not
work while the disc is stopped.
Press ON SCREEN twice.
"ON SCREEN" will appear on the displaywindow on the main unit. The status bar and
the menu bar will appear on the TV screen.
The above is an example for a DVD VIDEO.
Press cursor4/=.-to select an
item to be operated.
3 Press ENTER.
• The selected function can be set. For thesetting content, refer to the following"Functions list".
• The currently active function shows blue.
• To delete the menu bar, press ONSCREEN.
Functions list
For the functions with no special description for theoperations, press cursorA/'vto select, and pressENTER to determine.
Time displayselection
Select this to change time informationdisplayed on the display window on themain unit and the status bar. Each timeENTER is pressed the display will bealternated,DVD VIDEO/DVD AUDIO (operatingduring playback)TOTAL: Elapsed playing time of current title/
group.T.REM : Remainingtimeofcurrenttitle/groupTIME : Elapsed playing time of current
chapter/track.REM : Remainingtimeofcurrsntchaptsr/trackCD (operating during playback)/VCD/SVCDTIME : Elapsed playing time of current
track.REM : Remaining time of current track.TOTAL: Elapsed playing time of disc.T.REM : Remaining time of disc.
page 22
Repeat mode
page 19
Time search
Select a chapter/track, Press the................................ number buttons to input the chapter/track number and press ENTER.
Examples:Chapter search(DVDVIDEO)/Track 5: @ 24: @_@search (DVDAUDIO)
page 24
Audio language/Audio (DVD VIDEO/DVD AUDIO/VCD/SVCD)
page 24
Subtitle language(DVD VIDEO/SVCD)
• page 24
View angle (DVDVIDEO/DVD AUDIO)
Page switch (DVDAUDIO)
Switch the still pictures (B.S.R) recordedon a DVD AUDIO disc. ( " page 27)
Information displayed on the status bar
DVD VIDEO/DVD AUDIO (the example below is fora DVD VIDEO)
(DVD VIDEO)-Current title number (DVD AUDIO)
(DVD AUDIO) Current track numberCurrent group number
VCD/SVCD/CD (the example below is for a CD)
Playback mode Time Playback status
Current track number
NOTE
The playback status mark has the same meaning of
the mark on the On-screen guide (._ page 15).
Preferences Advanced operations
CHOICE Y /
Cursor
/ENTER
Numberbuttons
The initial settings of the system can be changedaccording to the environment the system is usedin.
NOTE
• Set the remote control mode selector to AU}IO I_
yIAUDIO before using the number buttons, v
• The top and bottom of the preference screen may
not be displayed on a wide TV. Adjust the picture
size on the TV.
Press CHOICE while the disc is
stopped or no disc is loaded("NO DISC" is displayed).• "SETTING" will appear on the display
window on the main unit and the followingscreen will be displayed on the TV.
LANGUAGE
[ MENU LANGUAGE
[ AUDIO LANGUAGE [ ENGLISH -j
[ SIJBTiTLE [ ENGLISH -I
I ON SOREEN LANGUAGE ] ENGUSH }
• Proceed with operations by following thedescription on the TV screen.
4;NOTE
• If the selected language is not recorded on the disc,
the optimum language set for the disc will be
displayed.
• For a language code such as "AA", refer to the
"Language codes" _ page 38).
Items Contents
MENU LANGUAGE Select the language for the DVD VIDEO menu.
AUDIO LANGUAGE Select the audio language for the BVD VIDEO.
Select the subtitle language for the DVDSUBTITLE VIDEO.
ON SCREEN Select the language displayed on theLANGUAGE 3reference screens.
Items
MONITORTYPE
SCREENSAVER
MP3_PEG
Contents ( : initial setting)
Select a display method suitable for your TV.16 : 9 NORMAL:
Select this when the aspect ratio of your wideTV is fixed to 16:9 (when playing a DVDVIDEO recorded at 4:3, the systemautomatically adjusts the screen width of theoutput signal).
16 : 9 AUTO:Select this when your TV is an ordinary wideTV.
Select this when the aspect ratio of your TV isconventional 4:3. While viewing a wide screen3icture the black bars appear on the top andbottom of the screen.
4 : 3 PS (Pan Scan):Select this when the aspect ratio of your TV isconventional 4:3. While viewing a wide screen3icture the left and right edges of the picturewill not be shown on the screen. (If the disc isnot compatible with Pan Scan, the picture willbe displayed at the Letter Box ratio.)
Select the Screen Saver mode between ON /OFF (Screen Saver activates when there is nooperation made for about 5 minutes since astill picture was last displayed).
If there are both and JPEG files on adisc, you can select which files to play. Whenthe preference has been changed, open/closethe tray and turn on the power again. (A discwith only one of MP3 file or JPEG file recordedcan be played regardless of this preference.)
29
Preferences (continued)
Items
DIGITALAUDIOOUTPUT
DOWN MIX
D(Dynamic).RANGECOMPRESSION
Contents ( : initial setting)
Select an output signal type from thefollowing in accordance with the deviceconnected to the digital audio outputterminal (AV amplifier, etc,), (See the listbelow for the preference items and outputsignal.)
PCM ONLY:
Device corresponding only to linear PCM
DOLBY DIGITAL/PCM:
Dolby digital decoder or a device having thesame function.
DTS/Dolby digital decoder or a device havingthe same function,
Switch signal from the digital outputterminal of the DVD VIDEO according to theconnected device. Select this when DigitalAudio Output is set to "PCM ONLY".
A Dolby Pro Logic decoder-built-in device.
STEREO:
An ordinary device,
When Virtual Surround is ON, Down Mixdoes not work,
To make adjustments for the differencebetween a high volume and a low volumewhen playing back with low volume (onlyfor a DVD recorded with Dolby digital).
AUTO :D. Range Compression automatically works,
ON:D. Range Compression always works.
Items
RESUME
ON SCREENGUIDE
AVCOMPULINKMODE
PARENTALLOCK
Contents ( : initial setting)
Select /OFF. (" page 18)
Select /OFF. ( " page 15)
( page 36)
DV_:_ :Connect to the video-3 input on the TV set orthe DVD input on the AV amplifier,
DVD2:Connect to the video-1 input of the TV set.
DVD3:Connect to the video-2 input of the TV set.
Set the Parental Lock function to cut offviolent scenes or replace the scenes withothers, (This is effective only for discsequipped with the Parental Lock function,)
COUNTRY CODE ( page 31)Select your country,
SET LEVEL:The restriction is stricter as the numberbecomes smaller, "NONE" is no restriction,
PASSWORD (essential):Enter four-digit number as your passwordusing the number buttons (1-9, 0) every time.(Enter "8888" if you forget your password,)The password is required at the time ofplayback,
• If you enter a wrong password three times,"EXIT" will be automatically selected,
List of relationships of DIGITAL AUDIO OUTPUT preference items and output signal
Playback discDIGITAL AUDIO OUTPUT preference
DOLBY DIGITAL/PCMStream/PCM PCM only
48 kHz, 16/20/24 bitsLinear PCM DVD VIDEO 48 kHz, 16 bits stereo linear PCM
96 kHz linear PCM DVD VIDEO
48/96/192 kHz, 48 kHz, 16 bits stereo linear PCM16/20/24 bits linear PCM DVD AUDIO
44.1/88.2/176.4k Hz,16/20/24 bits linear PCM DVD AUDIO 44.1 kHz, 16 bits stereo linear PCM
DTS DVD VIDEO DTS bit stream 48 kHz, 16 bits stereo linear PCM
DOLBY DIGITAL DVD VIDEO/ 48 kHz, 16 bits stereo linearDVD AUDIO DOLBY DIGITAL bit stream PCM
CD/VCD/SVCD 44.1 kHz, 16 bits stereo linear PCM/48kHz, 16 bits linear PCM
DTS CD DTS bit stream 44.1 kHz, 16 bits linear PCM
MP3 disc No output
NOTE
• For a DVD VIDEO without content protection set, there is a 20 bit or 24 bit output at the digital audio outputterminal.
3O
Country/Areacodes Advanced operations
AD Andorra
AE United Arab Emirates
AF Afghanistan
AG Antigua and Barbuda
AI Anguilla
AL Albania
AM Armenia
AN Netherlands Antilles
AO AngolaAQ Antarctica
AR ArgentinaAS American Samoa
A[ Austria
AU Australia
AW Aruba
AZ AzerbaijanBA Bosnia and
HerzegovinaBB Barbados
BD Bangladesh
BE BelgiumBF Burkina Faso
BG BulgariaBH Bahrain
BI Burundi
BJ Benin
BM Bermuda
BN Brunei Darussalam
BO Bolivia
BR Brazil
BS Bahamas
BT Bhutan
BV Bouvet Island
BW Botswana
BY Belarus
BZ Belize
CA Canada
CC Cocos (KeeB-_g)Islands
OF Central African
Republic
CG CongoOH Switzerland
CI C6te dlvoire
OK Cook Islands
CL Chile
CM Cameroon
ON China
CO Colombia
OR Costa Rica
CU Cuba
CV Cape Verde
CX Christmas Island
CY Cyprus
CZ Czech Republic
DE Gen-nany
DJ DjiboutiDK Denmark
DM Dorninica
DO Dominican Republic
DZ AlgeriaEC Ecuador
EE Estonia
EG Egypt
EH Western Sahara
ER Eritrea
ES Spain
ET EthiopiaFI Finland
FJ FijiFK Falkland Islands
(Malvir/as)
FM Micronesia
(Federated States of)
FO Farce Islands
FR France
FX France, Metropolitan
GA Gab()n
GB United KingdomGD Grenada
GE Georgia
GF French Guiana
GH Ghana
GI Gibraltar
GL Greenland
GM Gambia
GN Guinea
GP Guadeloupe
GQ Equatorial Guinea
GR Greece
GS South Georgia andthe South Sandwich
Islands
GT Guatemala
GU Guam
GW Guinea-Bissau
GY Guyana
HK Hong Kong
HM Heard Island and
McDonald Islands
HN Honduras
HR Croatia
HT Haiti
HU HungaryID Indonesia
IE Ireland
IL Israel
IN India
IO British Indian Ocean
]_rritory
IQ Iraq
IR Iran (blamic Republic of}IS Iceland
IT ItalyJM Jamaica
JO Jordan
J P Japan
KE Kenya
KG KyrgyzstanKH Cambodia
KI Kiribati
KM Comoros
KN Saint Kitts and Nevis
KP Korea, Democratic
People's Republic of
KR Korea, Republic of
KW Kuwait
KY Cayman Islands
KZ Kazakhstan
LA Lao People's
Democratic Republic
LB Lebanon
LC Saint Lucia
LI Liechtenstein
LK Sri Lanka
LR Liberia
LS Lesotho
LT Lithuania
LU LuxembourgLV Latvia
LY Libyan Arab
Jamahiriya
MA Morocco
MC Monaco
MD Moldova, Republic of
MG MadagascarMH Marshall Islands
ML Mall
MM Myanmar
MN MongoliaMO Macau
MP Northern Mariana
Islands
MQ MartiniqueMR Mauritania
MS Montserrat
MT Malta
MU Mauritius
MV Maldives
MW Malawi
MX Mexico
MY Malaysia
MZ MozambiqueNA Narnibia
NC New Caledonia
NE NigerNF Norfolk Island
NG Nigeria
NI Nicaragua
NL Netherlands
NO Norway
NP Nepal
NR Nauru
NU Niue
NZ New Zealand
OM Oman
PA Panama
PE Peru
PF French Polynesia
PG Papua New Guinea
PH PhilippinesPK Pakistan
PL Poland
PM Saint Pierre and
MiquelonPN Pitcaim
PR Puerto Rico
PT PortugalPW Palau
PY ParaguayQA Qatar
RE Reunion
RO Romania
RU Russian Federation
RW Rwanda
SA Saudi Arabia
SB Solomon Islands
SC Seychelles
SD Sudan
SE Sweden
SG Singapore
SH Saint Helena
SI Slovenia
SJ Svalbard and Jan
MayenSK Slovakia
SL Sierra Leone
SM San Marino
SN Senegal
SO Somalia
SR Suriname
ST Sac Tome and PrincipeSV El Salvador
SY Syrian Arab RepublicSZ Swaziland
TO Turks and Caicos
Islands
TD Chad
TF French Southern
l_rritories
TG Togo
TH Thailand
TJ 12ajikistan
TK Tokelau
TM Turkmenistan
TN Tunisia
TO 1-ongaTP East Timor
TR Turkey
TT Trinidad and Tobago
TV Tuvalu
TW l_aiwan
TZ i Tanzania, United
Republic ofUA Ukraine
UG UgandaUM United Srates Minor
Outlying IslandsUS United States
UY Uruguay
UZ Uzbekistan
VA Vatican City S_ate
(Holy See)VC Saint Vincent and the
Grenadines
VE Venezuela
VG Virgin Islands (British)
VI Virgin Islands (US)
VN Viet Nam
VU Vanuatu
WF Wallis and Futuna
Islands
WS Samoa
YE Yemen
YT Mayotte
YU YugoslaviaZA South Africa
ZM Zambia
ZR Zaire
ZW Zimbabwe
31
Listening to a radio broadcast
You can tune in to FM or AM.
FM/AM
TUNING TUNING @
FM MODE
Cursor(A/.)
1 Press FM/AM.Each time you press the button, the band willbe alternated between FM and AM.
Example:
I .... Immlm mm
m
_Frequency
ST
2 Press TUNING • or TUNING @
to select the station (frequency).
Automatic tuning:Hold down TUNING @ or TUNING @ until the
system starts searching, and then release thebutton.
When a station of sufficient signal strength istuned in to, the system stops searchingautomatically.To stop searching manually, pressTUNING @ or TUNING @.
Manual tuning:
Each time you press TUNING @orTUNING @, the frequency changes.
• When an FM stereo program is received,the "ST" (Stereo) indicator lights.
• You can also select the station withcursor A/T.
NOTE
If the stereo FM program currently tuned in to is noisy,you can improve the reception by pressing FM MODE
to switch to the monaural mode ("MONO" lights). If youpress FM MODE again, or tune in to another station,the receiving mode returns automatically to the stereomode.
32
Tuningin to a presetstation Listening to radio
FM/AM
AUDIO
iiCil 4 i¸¸ Jii: !i ¸ ii ii ii
Cursor(_/_)/ENTER
o Numberbuttons
Presetting stations in the system allows you toeasily tune in to a station.
NOTE
Set the remote control mode selector to .... _'_AUDIO before using the number buttons. _ UI
3
4
Select the number you want tostore by pressing cursor _/_while the memory number isblinking.• You can also select the number by using the
number buttons.• Refer to "How to use the number buttons"
(; -" page 15).
Press MEMORY or ENTER whilethe selected number is blinking."SET" will be displayed and the selectedstation will be stored.
NOTE
Storing a new station to a used number erases thepreviously stored station.
'I Press FM/AM repeatedly toselect either FM or AM.
2 Press the number buttons to
select the memory number of astation you want to tune in to.Refer to "How to use the number buttons"
(:- page 15).You can also select by pressing cursor .t/_.
The system stores up to 30 FM stations and up to15 AM stations.
I Select a station you want to
store (_ page 32 for how toselect).
2 Press MEMORY.
Figures (memory number) blink on the displaywindow for about 5 seconds.
33
Listening to the sound ofother audio device
MEMORY
Aux IJ
Connect the other audio device to this system inadvance (:- page 10).
1 Press AUX.
The source changes to AUX.
2 Play the other audio device.For details, refer to the manual of the deviceconnected.
3 Adjust the volume and the
sound quality of the system(_ page 16).
You can adjust the sound input level of anotheraudio device connected to the AUX jack.
1
2
Press AUX.The source changes to AUX.
Hold down MEMORY until an
input level is displayed.Each time you hold down the button, it switchesas follows:LEVEL 1: Select this normally.
AutoStandby
hq£ h_;_ ¸ ii
A STANDBY
iil_ _iii_:_ii_ _iii_ii_iii:_ii_ii ...........
If there is no operation for 3 minutes while the discis stopped, the power will be automatically turnedoff.
1 PressA.STANDBYduring playbackor while the disc is stopped, or nodisc is loaded ("NO DISC" isdisplayed)."A.S.ON" (Auto Standby On) and "A.STANDBY"will be lit on the display window on the main unit.
When a stopped state is entered (after playback isfinished, for example), "A.STANDBY" startsblinking.This means that the power will be turned offautomatically if there is no operation for 3 minutes.And, 20 seconds before the power is turned off,"POWER OFF" will appear blinking.
Releasing Auto Standby
Press A.STANDBY.
"A.S.OFF" (Auto Standby Off) will appear and"A.STANDBY" will be turned off on the displaywindow on the main unit.
NOTE
When the source is FM/AM or AUX, Auto Standbydoes net work.
LEVEL 2: Select this when the input levelfrom the other device is too highand the sound is distorted.
The initial setting is "LEVEL1".
34
SleepTimer TrayLock
SLEEP
i ii
i
When the time you specify elapses, the system willbe turned off by itself.
Press SLEEP.Each time you press the button, the time indicatedon the display window on the main unit changes (inminutes).
Example: When Sleep Timer is set to 60minutes
.... \ I.....,>SLNr=p
Nmm Nmmmm--m m ram-
;''% ;" ; (Blinking)mmmmm mmmmm
i
Sleep Timer will be automatically set in a fewseconds, and the indication will disappear.
NOTE
When Sleep Timer is set, the display window darkensautomatically.
Changing the time
Reselect the time by pressing SLEEP repeatedly.
Confirming the time
Press SLEEP once while Sleep Timer is set.
Releasing
Press SLEEP repeatedly until "OFF" appears.
NOTE
Sleep Timer will also be released when the power isturned off.
You can lock the disc tray to prevent the disc frombeing ejected.
Setting
Turn off the power. And while holding down • (Stop)on the main unit, press ,*, (Open/Close)."LOCKED" appears on the display window on themain unit.
Releasing
Carry out the same operations as those for setting."UNLOCKED" appears on the display window onthe main unit.
35
UsingAVCOMPULINK
When the TV set or device to be connected is a
JVC product equipped with the AV COMPU LINK-[[ or -[]! jack, connecting them to the AV COMPULINK jack on the system will allow you to controlthe other devices by operating one device.
Connection with a TV set and an AVamplifier
• Also read manuals of the
AV amplifier.
NOTE
• Refer to "Others" (,_page 30) to set the AVCOMPU LINK mode.
• Also carefully readmanuals of devices to beconnected.
Connection with a TV set
• Connect to the Video 3 (DVD) input jack on yourTV set. If Video 3 is for DV/Movie input, read thefollowing descriptions:
Connection with a TV set and a VCR
4,
@j Connection cord(sold separately)
"AV COMPU
LINKql
v
JVC-made VCR
TV input jack AV COMPU LINK mode F/emote-control code of VCR
Video 1 DVD 2 BDVD 3 A
• When using with initial settings, connect to Video3 (if not set to DV/Movie input). Set the remote-control code to "A".
Main unit
(soldseparately) ,_.c0_F.u_._ j
I Input jack of AV amplifier AM COMPU LINK mode ]
DVD _ DVD 1 ]
NOTE
• Connecting DVD sound output to a sound input jackfor any device other than a DVD disables properoperation.
• When connecting component video output to a TVset, change setting of the A V COMPU L INK mode inthis system to "DVD 1". Do not connect to the S-video jack on the A V amplifier.
1
2
3
Turn on the main power of theTV set.
Insert a disc or videotape intothe source device (the systemor a VCR).
Press the play button on thesource device.• The TV set will be turned on.• TV input will be switched to external input
(Video 1,2 or 3) of the source device.• The AV amplifier will be turned on.• The source of the AV amplifier will be
switched to the device on which the playbutton has been pressed.
36
Troubleshooting Reference
When you encounter a problem that seems to be afault, check the following points before contactingyour JVC service center:
Power source
• Power does not come on.
• The power cord is not connected to the mainunit or an AC outlet.
-_ Connect the power cord correctly.(_, page 11 )
• TheTV screendarkens.• "SCREEN SAVER" is set.
-_ If set, press any button. (- page 29)
• Thescreencannotbe switched.• The Progressive mode is applied only to
component video output.
About sound
• Thereis nosound.• Speakers are not connected correctly.
Operation
• Youcannotoperateany button.• Some specific operations may be inhibited
for some discs.
• The remote control does not work.
• The dry-cell batteries have run out.Replace the batteries. (: -" page 6)
: -. page 9The sound is muted.
-_:_ page16"NO AUDIO" is displayed on the displaywindow.The disc may have been produced throughillegal copying.
Confirm at the store where you bought thedisc.
• A disc cannot be played back.• In the case of DVD VIDEO discs
-_ Check the Region Code number of thediscs. (. _ page 3)
• "PLAYABLE Err" is displayed on the displaywindow.It is not a disc that can be played on thissystem.
Check the disc type. (- page 3)
• Parental Lock is set. ( " page 30)
About images
• No pictureappears.• The video cord is not connected correctly.
-_ • _ page 11
• Both of the component video jack and S-video jack are connected.
Connect either. (: _ page 11)
• The pictureis distorted.• A VCR is connected between the main unit
and the TV set.
-_ Connect the main unit directly to the TVset. (: -" page 11)
• Although this system is connected to a non-Progressive TV set, DVD's scan mode is setto "PROGRESS".
Set the scan mode to "INTER.".
(__ page 26)
• Thescreensize is abnormal.• The screen size is set improperly.
Set "MONITOR TYPE" accordingto the TVset you are using. (: -" page 29)
• The sound is weak compared with TV or Video.• "DVD LEVEl" is set to "NOR".
-_ Set to other than "NOR". (. -" page 26)
• Thesoundis distorted.• The volume is turned up too high.
Turn down the volume. (:_ page 16)
No sound comes out of the subwoofer.• "SUB WFR" is turned off.
Press S.WFR OUT to turn on.
(_:" page 10)
About radio
• The sound is noisywhile receiving./Receivingis disabled.
• The antenna is not connected correctly.-_ Connect the antenna correctly.
(__"page 8)
37
38
Troubleshooting (continued)
Others
• It is not possible to switch audio or subtitles
between languages.• The disc does not contain 2 or more
languages.-_ If only a single language is recorded on the
disc, switching to another language isimpossible. (- page 24)
No subtitle is displayed.• The disc does not contain any subtitles.
-_ A DVD VIDEO without subtitles cannot
display any subtitles.
• The subtitle language is set to "OFF".-_ Specify a language. (. -" page 29)
• Before or after A point or B point in A-BRepeat Playback, no subtitle may bedisplayed.
• The disc cannot be ejected.
• Tray Lock is set.-_ • _ page 35
• "TRAY Err" is displayed on the displaywindow.
• The tray is not open fully due to an obstacle.-_ Close the tray and remove the obstacle.
"LR ONLY"is displayedonthedisplaywindow(for a DVD AUDIO).• Because, for the track being played back,
down mix is inhibited for multi-channelsound, the sound of L and R is output directly(a normal action).
If the systemdoesnotworkproperlydespitecorrectionmeasuresabove
Many functions of this system are implemented bymicrocomputers. If pressing any button does notresult in the normal action, disconnect the powerplug from the outlet, wait for a while, and reconnectthe system.
Languagecodes
Code LanguageAA AfarAB AbkhazianAF AfrikaansAM AmeharicAR ArabicAS Assamese
AY AymaraAZ AzerbaijaniBA BashkirBE ByelerussianBG BulgarianBH BihariBI Bislama
BN Bengali, BanglaBO TibetanBR BretonCA CatalanCO CorsicanCS CzechCY WelshDA DanishDZ BhutaniEL GreekEO EsperantoET Estonian
EU BasqueFA PersianFI Finnish
FJ FijiFO FaroeseFY FrisianGA IrishGD Scots GaelicGL GalicianGN GuaraniGU GujaratiHA HausaHI HindiHR Croatian
HU HungarianHY Armenian
IA InterlinguaIE InterlingueIK InupiakIN IndonesianIS IcelandicIW HebrewJI YiddishJW Javanese
KA GeorgianKK KazakhKL GreenlandicKM CambodianKN KannadaKO Korean (KOR)KS KashmiriKU KurdishKY KirghizLA LatinLN LingalaLO LaothianLT LithuanianLV Latvian, LettishMG MalagasyMI Maori
Code LanguageMK MacedonianML MalayalamMN MongolianMO MoldavianMR Marathi
MS Malay (MAY)MT MalteseMY BurmeseNA NauruNE NepaliNL Dutch
NO NorwegianOC Occitan
OM (Afan) OromoOR OriyaPA PanjabiPL PolishPS Pashto, PushtoPT PortugueseQU QuechuaRM Rhaeto-RomanceRN KirundiRO RumanianRU RussianRW KinyarwandaSA SanskritSD Sindhi
SG SanghoSH Serbo-CroatianSl SinghaleseSK SlovakSL SlovenianSM SamoanSN ShonaSO SomaliSQ AlbanianSR SerbianSS SiswatiST SesothoSU SundaneseSV SwedishSW SwahiliTA TamilTE TeluguTG TajikTH ThaiTI TigrinyaTK TurkmenTL TagalogTN Setswana
TO TongaTR Turkish
TS TsongaTT TatarTW TwiUK UkrainianUR UrduUZ UzbekVl VietnameseVO VolapukWO WolofXH XhosaYO YorubaZU Zulu
Specifications Reference
General
Power source: AC 120 V %, 60 Hz
Power consumption: 24 W (in operation)0.8 W (on standby)
Weight: 3.0 kg (6.7 Ibs)External dimensions 232 mm X 100 mm X 269 mm
(W X H X D): (93/16inches X 315/16inches X106/8 inches)
DVD playerPlayable discs: DVD VIDEO, DVD AUDIO, VCD,
Super VCD, CD, CD-R/RW (CD,VCD, MP3, JPEG format), DVD-R/RW (video format)
Video output
Color system:Horizontal resolution:
Composite X 1 :
S-video X 1:
Component X 1:
NTSC500 lines
1.0 V (p-p)/75 O,synchronization negativeY output: 1.0 V (p-p)/75 _,synchronization negativeC output: 0.286 V (p-p)/75 _Y output: 1.0 V (p-p)/75PdPR output: 0.7 V (p-p)/75 -Q
Audio outputAnalog sound output:
Speakers X2Output power:
Fitting impedance:Headphones Xl:
Fitting impedance:Subwoofer Xl :
Digital sound output:Optical Xl:
30 W per channel,min. RMS, at 4 .Q at1 kHz with no morethan 10% totalharmonic distortion4_to 16_11 mW/32 _Q16 _-_to 1 kO500 mVrms/10 k_
-21 dBm to -15 dBm
Audio input
Sound input:Level 1:Level 2:
Tuner
FM tuner:
Receiving frequency:Antenna:
AM tuner:
Receiving frequency:Antenna:
SpeakerType:
Speaker:Power handling capacity:Impedance:Sound pressure level:Dimension (W X H X D):
Weight (1 unit):
AUX X 1250 mV/50 k£_500 mV/50 k£_
87.5 MHz to 108.0 MHz75 £_-unbalanced type
530 kHz to 1710 kHz
External antenna jack (loopantenna)
1-way bass-reflex typeMagnetically shielded type8 cm (33/16 inches) cone X130 W4£_81 dB/Wom120ram X 161 mm X239 mm
(43/4 inches X 63/8 inches X97/16 inches)1.6 kg (3.6 Ibs)
Other outputAV COMPU LINK X2 (o3.5)
Designs and Specifications are subject to changewithout notice.
39
Authorized Service Centers
JVCQUALITY SERVICE
HOW TO LOCATE YOUR JVC SERVICE CENTER
TOLL FREE: 1 (800) 537-5722http://www.jvc.com
Dear Customer,In order to receive the most satisfaction from your purchase, please read the instruction booklet before operatingthe unit. In the event that repairs are necessary, please call 1 (800) 537-5722 for your nearest authorized serviceror visit our website at www.JVC.com
Remember to retain your Bill of Sale for Warranty Service.
Do not service the television yourselfCaution
To prevent electrical shock, do not open the cabinet. There are no user serviceable parts inside. Pleaserefer to qualified service personnel for repairs.
Accessories
To purchase accessories for your JVC product, please call toll free: 1 (800)882-2345 or on the web atwww.JVC.com
4O
*****W***_****** _r******'_r************************_**W**_'k**_'_*****_************
**JVC *** MNiTED WARRANTY CONSUMERVmDEO1-90 **
* JVC COMPANY OF AMERmCA warrants this product and aH parts thereof, except as set forth below ONLY TO THE *ORIGINAL PURCHASER AT RE-FAtaLto be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date
* of original retail purchase for the period as shown below. ("The Warranty Period") *
* PARTS LABOR* 1 YR 90 DAYS _"
* THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNmTED SLATES, THE DmSTRICT OF COLUMBIA AND *** iN COMMONWEALTH OF PUERTO RICO.. *
* WHAT WE WmLL DO: *_- if this product is found to be defective, JVC will repair or repUace defective paris at no charge} to the original owner. .
* Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service ** centers Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts* thereof may be brought to a JVC authorized service center on a carryqn basis except for Television sets having a screen ** size 25 inches and above which are covered on an in-hot'he basis. *
* WHAT YOU MUST DO FOR WARRANTY SEF_V|CE: *Return your product to a JVC authorized service center with a copy of your bi[Uof sale. For your nearest JVC authorized
* service center, phase call toll free: (800) 537-5722. *
* ff service is not avaimabb bcaHy, box the product carefully, preferabUy in the originaU carton, and ship, insured, with _. a copy of your bill of sah; pUus a h;tter of expUanation of the probUem to the nearest JVC Factory Service Center, the .* name and location of which will be given to you by the toll-free number. *
if you have any questions concerning your JVC Product, please contact our Customer Relations Department. .
WHAT iS NOT COVERED: .*. This limited warranty provided by JVC does not cover: .
* 1. Products which have been subject to abuse, accident, aheration, modification, tampering, negmigence, misuse, fauhy _. instalUation, Uack of reasonaHe care, or if repaired or serviced by anyone other than a service faciUity authorized by .* JVC to render such service, or if affixed to any attachment not provided with the products, or if the model number ** or serial number has been altered, tampered with, defaced or removed; *. 2. initial installation and installation and removal for repair; .
* 3. Operational adjustments covered in the Owner's Manual normal maintenance, video and audio head cleaning;4. Damage that occurs in shipment, due to act of God, and cosmetic damage; .
* 5. Signal reception problems arid faibres due to line power surge}; *_ 6, Video Pickoup JiJbes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase; _* 7. Accessories; *
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase); .
* There are no express warranties except as listed above. *
* THE DURATION OF ANY iMPLiED WARRANTIES, INCLUDING THE iMPLiED WARRANTY OF MERCHANTABiLiTY, iS *** LiMiTED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. **
* JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, iNCONVENiENCE, LOSS OR ANY OTHER *** DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (iNCLUDiNG, WITHOUT LIMITATION, DAMAGE _.* TO TAPES, RECORDS OR DISCS) RESUL-HNG FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH *
OF THiS WARRANTY. ALL EXPRESS AND mMPLIED WARRANTIES, iNCLUDiNG THE WARRANTIES OF MERCHANT_ **. ABiLiTY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE. *
._ Some states do not allow the excbsion of incidental or consequential damages or limitations on how long an ._
_ implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific *legal rights and you may also have other rights which vary from state to state. *
. JVC COMPANY OF AM ERICA 1700 Valley Road .* DUVBUON OF JVC AMERUCAS CORR Wayne, NJ 07470 *
*_****************************_**********************************************
REFURBmSHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY, FOR DETAILS OF
REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY iNFORMATiONPACKAGED WITH EACH REFURBmSHED PRODUCT,
For customer use:
Enter below the Model No. which is located either on the rear, bottom or side of the cabinet. Retain this informationfor future reference.
Model No. : Serial No. :
Purchase data : Name of dealer :
BT-51005-5(oso_)
41
/
mx5..,,,,,&
00
_0
0
00
0ZmZ
m
VICTOR COMPANY OF JAPAN, LIMITED
EN
© 2004 VICTOR COMPANY OF JAPAN, LiMiTED 0104SKMMODJSC
![COMPACT COMPONENT SYSTEM EX-A1 · COMPACT COMPONENT SYSTEM EX-A1 Consists of CA-EXA1 and SP-EXA1 EX-P1 Consists of CA-EXP1 and SP-EXP1 LVT1284-015B [UJ] INSTRUCTIONS EXA1 P1mkII[UJ]-00Cov1.fm](https://img.pdfslide.us/doc/110x75/604325f8470edb07492f3668/compact-component-system-ex-a1-compact-component-system-ex-a1-consists-of-ca-exa1.jpg)
![COMPACT COMPONENT SYSTEM EX-A1dl.owneriq.net/d/dd3deb6a-1953-3dc4-b1f8-a1bf29b67c09.pdf · COMPACT COMPONENT SYSTEM EX-A1 Consists of CA-EXA1 and SP-EXA1 LVT1095-015A [UJ] INSTRUCTIONS](https://img.pdfslide.us/doc/110x75/5f8b551744c6dc29f64ce177/compact-component-system-ex-a1dl-compact-component-system-ex-a1-consists-of-ca-exa1.jpg)