— COMMUNIC ATION NET WORKS

We are securing the past in a fast moving future.FOX605 multiservice platform.

Browser – Interface Local/Remote Via HTTPsFOX605 has an embedded server providing a browser based Graphical User Interface (GUI). Standard browsers like Firefox or IE can be used. The GUI offers strong Monitoring/Diagnostics/Maintenance features and is recommended to be used for the typical Configuration use-cases.

NMS-Suite FOXView & FOXMAN-UNFOXView and FOXMAN-UN are two key components of ABB’s overall NMS-suite, supporting a wide range of ABB’s communication portfolio of FOX-devices but also the ETL- and NSD – devices for Power Line Carrier and protection applications, Wireless-devices and the AFx-family of substation oriented switches/routers/firewalls.

CLI –Interface Local/Remote via SSHFOX605 offers a Command Line Interface including comprehensive ‘help’ functionalities. It is a very efficient way especially for complex tasks and configurations. Its usage is further facilitated by documentation like the ‘Command Reference Guide’ and an ‘Application/Use-case manual’.

—Flexible management tools. FOX605 complies with latest expectations in terms of managing a communication network in a secure way by using appropriate protocols and tools. FOX605 is supported by ABB’s NMS-suite but depending on customer preferences and management-tasks a browser-based GUI or a highly efficient CLI can be used. The ABB NMS-Suite supports not only FOX but the full range of ABB's wired and wireless communication portfolio.

—Selected technical highlights.

Sophisticated Security FeaturesFOX605 offers service-aware user traffic encryption at layer 2 (MAC-layer).

This even protect legacy data (e.g. emulated E1 flows) without bringing them in resource-and time-consuming processes to the layer 3/4 to make use of IPSEC. Following advantages result: Reduced protocol complexity/Lowest impact on network performance/Transparent to media. The underlying encryption technology is based on MACSec (IEEE 802.1AE), however in a significantly enhanced form to allow end-to-end encryption (e2e) even through non-encryption aware networks.

Individual flows can be protected end-to-end by service-aware encryption; it’s up to the user to define which services shall be encrypted and which information shall be transmitted plain text. Criteria to distinguish the services are port, VLAN-tags or MPLS-labels.

Network SynchronizationFOX605 offers the latest technology for network synchronization.

Reliable distribution of timing information across a network is essential and helps reduce dependence on GPS-time that is a security risk especially for mission critical applications. For demanding network synchronization tasks FOX605 supports latest PTP/IEEE1588v2 (boundary & ordinary mode) and SyncE functionalities. The latter can make use of Quality Level information transmitted similarly to earlier SDH SSM technology.

For traditional time-distribution schemes, FOX605 can work with up to 5 NTP servers.

Timing info can be exchanged on multiple FOX605 interfaces and protocols (e.g. ToD, PTP, IRIG-B002/-B006).

Built-in RFC2544 & Y.1564 Performance TesterThe ITU-T Y.1564 defines a methodology that is used to access the configuration and performance of Ethernet networks to deliver Ethernet-based services. It was designed to serve as a Service Level Agreement (SLA) validation tool, ensuring that the services on a network meet the agreed committed rate

FOX605 has a built in ITU-T Y.1564 tool which fills the methodological gaps not covered by RFC2544 (like checking configuration and performance of CIR, CBS, EIR and EBS, measuring Frame Delay Variation and simulation of network conditions similar to real life scenario). Similar to the built in RFC2544 tool, each test configuration is a ‘profile’ and results are saved in a ‘report’. Up to 16 profiles and 10 reports can be stored on FOX605.

FOX605’s VersatilityCentral part of FOX605 is a highly versatile, wire-speed switch that supports native L2 Ethernet as well as MPLS-TP. Legacy interfaces can be groomed in the TDM cross-connect before emulated via SAToP.

AES 256-bit traffic encryption can be enabled for the optical SFP-ports based on selectable criteria such as port, VLAN- tags or MPLS-TP labels. Legacy interfaces can be connected directly to the functional block responsible for circuit emulation or via the digital cross-connect (DXC-64k) that a lows bundling/grooming services into one or several E1-equivalent streams for SAToP (max. 12 flows).

The timing block is closely interlinked with the PHY because SyncE and PTP information have to be derived directly at the physical interface.

Timing Interfaces

2 x Power

Mgt/Terminal Alarms

8 x LAN/WAN (el./opt; PoE)

12 x Traditional/Legacy Interfaces

PSU

(Sin

gle

/Do

uble

) Po

wer

Ove

r Et

hern

et

LAN/WAN PHY Including Encryption

Functions & PoE

CPU Switching L2/MPLS-TP

Circuit Emulation (SAToP)

Legacy Interfaces

Cross connect

Tim

ing

Segmented Data | L4 | L3 | L2

Application Application Data Application

Presentation Presentation Data Presentation

Session Procedural Data Session

Transport Segmented Data | L4 Transport

Network Segmented Data | L4 | L3 Network

Data Link Data Link

Physical Physical

L2 encryption for upper layers

Physical Transmission Medium

Master Boundary Clock

Slave

Ordinary ClockOrdinary Clock

SlaveSlave

PTP/High Precision Time Source

Grand Master

FOX605-2FOX605-1

VLAN100

Tagged Frame

VLAN100

Loop

Untagged Frame Access VLAN 100

Untagged frame Access VLAN 100

—All in one solution.FOX605 is a comprehensive combination of latest MPLS & L2 packet switched technology with traditional legacy interfaces and complemented with state of the art synchronization - and cyber security - features. FOX605 addresses a wide range of applications in harsh environments where traditional TDM services and packet switch technology coexist.

HOUSEKEEPING• Alarms (In/Out)• Management• Terminal

POWER SUPPLY• Redundant Operation• Hot Swappable

SYNC/TOD• 1 PPS & 10MHz• ToD & BITS

ETHERNET/MPLS-TP• 4x GE el. (PoE/PoE+ capable)• 4x SFP (Opt./el.;encryption capable)

SFP support of E/FE/GE and T1/OC-3/STM-1

LEGACY• 4x 64 kbit/s• 4x E1 ports• 4x RS-232/RS485/V.11 also configurable for IRIG-B

Do

cum

ent

ID :

9A

KK

1070

45

A0

45

7

—We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB AG does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.

We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB AG. Copyright© 2017 ABBAll rights reserved

—Type–tested for harsh environments.

Like all members of ABB’s FOX–family, FOX605 was successfully type–tested by an independent, internationally accredited European test–lab for EMC, climatic and mechanical compliance according to following standards.—Basic standards (overview)

Specification Description

Immunity IEC/EN61000–4–2Electrostatic Discharge Immunity

IEC/EN61000–4–3ImmunitytoElectromagnetic Field Radiated

IEC/EN61000–4–4Immunity Transient Electric Fast EFT/Burst

IEC/EN61000–4–5ImmunitytoVoltage Surge

IEC/EN61000–4–6ImmunitytoRadio Frequency Voltage conducted in power terminals

IEC/EN61000–4–17Rippleon DC input power port immunity

IEC/EN61000–4–18Damped oscillatory wave immunity

IEC/EN61000–4–29Voltagedips,short interruptions and voltage variations on DC input power port

Emission EN55022(CISPR–22)Conductedemissions in power terminals (AC) and telecommunications terminal class B

EN55022(CISPR–22)Radiatedemission class B

Safety IEC/EN60950–1

—Applied safety standards

Standards Description

IEC/EN60950–1 Information technology equipment – Safety

IEC60255–27 Measuring relays and protection equipment – Product safety requirements

EMC

IEC/EN61000–6–2to6–5

—Emission tests

Test name Description Basic standard Level

Radiated radio frequency interference

30MHzto1GHz1GHzto6GHz

EN55022 class B

Conducted radio frequency interference

150kHzto30MHz

EN55022 class B

—Immunity tests

Test name Description Basic standard Level

ESD test Contact/air discharge

IEC61000–4–2 6/8kV

Radiated electromagnetic field

80to1000MHz,80%AM,1kHzmodulated

IEC61000–4–3 10V/m

1to2.5GHz,80%AM,1kHzmodulated

IEC61000–4–3 10V/m

Fast transient test

DC Power supply:all other ports:

IEC61000–4–4 4kV4kV

Surge test(1.2/50µs)

DC Power supply 48V: Common mode (L–to–PE)Differential mode (L–to–L)

IEC61000–4–5 2kV1kV

Signal terminals:Common mode (L–to–PE)Differential mode (L–to–L)

2kV1kV

Conducted radio frequency interference

0.15to80MHz,80%AM,1kHzmodulated

IEC61000–4–6 10V/m

Conducted common mode disturbance

Frequency50Hz,continuous mode

IEC61000–4–16

30/300VRMS

—Shock and vibration

Mechanicaltests:Operation(IEC60721–3–3,class3M1)

Test name Description Basic standard Level

Vibration sinusoidal

5–9Hz;displacement amplitude

IEC60068–2–6 ±0.3mm

9–200Hz;acceleration amplitude

1m/s²

Shock Shock response spectrum type L; Peak acceleration

IEC60068–2–27

40m/s²

—FOX605 Technical Data.

As FOX605 combines traditional TDM-services with the latest packet switch technology it complies to applicable parts of a wide range of standards and recommendations of both worlds.—Physical interface ports

Legacy TDM ports FOX605 provides following TDM legacy ports:

RS-232/RS-485/X.24(V.11)

Four ports which may operate in RS-232,X.24(V.11)or4-wireRS-485Full-Duplex modes; When operating asRS-232orRS-485eachserialstream is asynchronously oversampled by configurable nx64kbit/sandmappedtoG.704structured flows; When operating as X.24(V.11)theinterfaceoperatesinsynchronous mode (always as master) and all data will be mapped from/tonx64kbit/stimeslots(upto2048kbit/sissupported)

G.703 64kbit/s

FourG.70364kbit/scodirectionalports

G.703 2048kbit/s E1

FourG.7032048kbit/sports (E1ports),unframed(32timeslots,transparent)orframed(PCM31,PCM31-CRC,PCM30-CASorPCM30-CAS-CRC)

ANSI 1544kbit/s T1

Via SFP

Mgt/Alarm/Sync Description

Terminal port TheFOX605hasoneconsoleporttomanage the device directly; The terminalportusesanRJ45connectorin accordance with the standard RS232(EIA/TIA574)

MGMT interface FOX605hasoneEthernet10/100BASE-Tportforoutofbandmanagement of the device, in compliance with the standard

100BASE-T

Alarm port FOX605providesalarminterfacesfor external use;Two isolated digital alarm inputs using optocouplers;Two alarm relay outputs (urgent and non-urgent)

Sync ports The clock interfaces are:

ToD Time of Day (ToD) interface is a serial interface used to exchange time information with an external device; The ToD interface has a separate RS-422(V.11)interfaceand1PPSsignalingonanRJ45connector

BITS External clock interface (BITS) is a G.703-2048kHzsynchronizationinterfaceonRJ45

1PPSInput/Output G.8271clockreference,withanunbalanced50ohm1PPSsignalonaminiBNC(cc4)connector,withinput-output protection

10MHzInput/Output Typically connected to a GPS receiver which provides a sine/square wave signalusingaminiBNC(cc4)connector;Theoutputprovidesa10MHz square wave clock output for external use

IRIG-B Output The signal(s) can be made available onlegacyTDMportsofFOX605SupportsIRIG-B002&-006

Ethernet ports Description

FOX605hasfour100BASE-FX/1000BASE-XportsforusewithSFP, and more four 10/100/1000BASE-TcopperbasedportswithRJ45connectors

The copper-based ports support PoE and PoE+ (Power over Ethernet)

—Related LAN/WAN standards

FOX605ensureshighserviceavailabilityandperformancethroughadvanced functions of OAM, prioritization mechanisms and traffic protection schemes (ERPS, RSTP/MSTP). IthasaninternalmatrixwithcapacitytoensureL2/MPLSswitchingat wire speed, allowing low latency without blockings.

On the trunk side, the multiplexer offers strong network security functionalitiesbasedonL2-encryption.Thisapproachallowssignificant improvements of data security based on service-aware encryption.

BelowtablelistthemostimportantLAN/WANstandardsFOX605can be associated with:

IEEE Description

802.1d Media Access Control (MAC) Bridge

802.1p Priority Support

802.1q Virtual LAN

802.1s Multiple Spanning Tree (MSTP)

802.1w Rapid Spanning Tree (RSTP)

802.1ab Link Layer Discovery Protocol (LLDP)

802.1ad Provider Bridges

802.1ag Connectivity Fault Management (CFM)

802.3 10Base-T

802.3u 100Base-TX

802.3x Flow Control

802.3z 1000BASESX/LX

802.3ab 1000Base-T

802.3ah OAM Link-Fault Management Overview

1588-2008 Precision Clock Synchronization Protocol for Networked Measurement and Control Systems

ITU-T Description

G.703 Physical/electrical characteristics of hierarchical digital interfaces

G.704 Synchronous frame structures used at1544,6312,2048,8448and44736kbit/shierarchicallevels

G.8032 Ethernet ring protection switching

G.823 The control of jitter and wander within digital networks which are basedonthe2048kbit/shierarchy

G.8261 Timing and synchronization aspects in packet networks

G.8262 Timing characteristics of a synchronous Ethernet equipment slave clock

G.8264 Distribution of timing information through packet networks

Y.1564 Ethernet service activation test methodology

Y.1731 OAM functions and mechanisms for Ethernet based networks

MEF Description

MEF 6.1 Metro Ethernet Services Definitions Phase 2

MEF 8 Implementation Agreement for the Emulation of PDH Circuits over Metro Ethernet Networks

MEF 9 Abstract Test Suite for Ethernet Services at the UNI

MEF 10.2 Metro Ethernet Services Attributes Phase 2

MEF 14 Abstract Test Suite for Traffic Management Phase 1

MEF 18 Abstract Test Suite for Circuit Emulation Services

MEF 20 UNI Type 2 Implementation Agreement

MEF 23.1 Class of Service Phase 2 Implementation Agreement

IETF Description

RFC791 Internet Protocol IP

RFC793 Transmission Control Protocol TCP

RFC854 Telnet Protocol Specification

RFC1157 Simple Network Management Protocol (SNMP)

RFC1212 Concise MIB Definitions

RFC1213 Management Information Base for Network Management of TCP/IP based internets: MIB-II

RFC1215 A Convention for Defining Traps for Use With the SNMP

RFC1441 SNMPv2 Protocol Framework

RFC1492 An Access Control Protocol, Sometimes Called TACACS

RFC1769 Simple Network Time Protocol SNMP

RFC1812 Requirements for IP Version 4 Routes (IPv4)

RFC1901 Introduction to Community-based SNMPv2

RFC1903 Textual Conventions for Version 2 of SNMPv2

RFC1904 Conformance Statements for Version 2 of SNMPv2

RFC1905 Protocol Operations for Version 2 of SNMPv2

RFC1907 Management Information Base (MIB) for SNMPv2

RFC1908 Coexistence between V1 and V2 of the Internet-standard NMF

RFC2131 Dynamic Host Configuration Protocol (DHCP)

RFC2309 Queue Management and Congestion Avoidance in the Internet

RFC2474 Definition of the Differentiated Services Field (DS Field) in the IPv4 and IPv6 Headers

RFC2475 An Architecture for Differentiated Services

RFC2544 Benchmarking Methodology for Network Interconnect Devices

RFC2578 Structure of Management Information Version 2 (SMIv2)

RFC2597 Assured Forwarding PHB Group

RFC2697 A Single Rate Three Color Marker

RFC2819 Remote Network Monitoring Management Information Base

RFC2863 The Interfaces Group MIB

RFC2865 Remote Authentication Dial in User Server (RADIUS)

RFC3246 An Expedited Forwarding PHB

RFC3410 Introduction and Applicability Statements for Internet Standard Management Framework

RFC3414 User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)

RFC3584 Coexistence between Version 1, Version 2, and Version 3 of the Internet-standard Network Management Framework

RFC3635 Definitions of Managed Objects for the Ethernet-like Interface Types

RFC4188 Definitions of Managed Objects for Bridges

RFC4250 The Secure Shell (SSH) Protocol Assigned Numbers

RFC4251 The Secure Shell (SSH) Protocol Architecture

RFC4252 The Secure Shell (SSH) Authentication Protocol

RFC4253 The Secure Shell (SSH) Transport Layer Protocol

RFC4254 The Secure Shell (SSH) Connection Protocol

RFC4385 Pseudowire Emulation Edge-to-Edge (PWE3) Control Word for Use over an MPLS PSN

RFC4448 Encapsulation Methods for Transport of Ethernet Over MPLS Networks

RFC4553 Structure-Agnostic Time Division Multiplexing (TDM) over Packet (SAToP)

RFC5424 The Syslog Protocol

Mechanical tests: Transport (IEC60721–3–2, class 2M1)

Test name Description Basic standard Level

Vibration sinusoidal

5–9Hz;displacement amplitude

IEC60068–2–6 ±3.5mm

9–200Hz;acceleration amplitude

10m/s²

200–500Hz;acceleration amplitude

15m/s²

Shock Shock response spectrum type L; Peak acceleration

IEC60068–2–27

100m/s²

Free fall Height of fall IEC60068–2–31

0.25m

—Climatic conditions

Application Requirements

Operation ETSIEN300019–1–3class3.2E–Temperature–5°to55°C–Humidity95%r.h.(noncondensing)

Storage ETS300019–1–1,class1.2–Temperature–25…+70°C–Humidity95%r.h.(noncondensing)

Transport ETS300019–1–2,class2.2–Temperature–25...+70°C–Humidity95%r.h.(noncondensing)

RFC5462 Multiprotocol Label Switching (MPLS) Label Stack Entry: "EXP" Field Renamed to "Traffic Class" Field

RFC5905 Network Time Protocol Version 4: Protocol and Algorithms Specification

RFC5586 MPLS Generic Associated Channel

RFC5960 MPLS Transport Profile Data Plane Architecture

RFC6370 MPLS Transport Profile (MPLS-TP) Identifiers

RFC6427 MPLS Fault Management Operations, Administration, and Maintenance (OAM)

RFC6423 Using the Generic Associated Channel Label for Pseudowire in the MPLS Transport Profile (MPLS-TP)

RFC7324 Updates to MPLS Transport Profile Linear Protection

RFC7213 MPLS Transport Profile (MPLS-TP) Next-Hop Ethernet Addressing (support for section 2: Point-to-Point Link Addressing)

—Cyber Security robustness testing

FOX605 is tested for cyber security robustness by DSAC, a Device

Security Assurance Center. The test center performs a multitude

of different tests, including port scanning, network flooding,

vulnerability scanning and protocol fuzzing. This is done by using

a variety of best in class testing platforms such as Wurldtech

Achilles, Spirent Mu-8000 and Codenomicon Defensics, as well

as other complementary testing tools.

Doing these tests is one of many cyber security related measures

applied to ABB solutions to achieve utmost and state of the art

protection against malicious cyber activities. It’s however not

a guarantee for absolute protection and has to be understood

as one puzzle part of ABB’s Defence in Depth protection concept.

—Power concept

Power supply

FOX605 is a fan-less device; It can operate either with one or two inserted Power Supply Units (PSU)

1+1 Power Supply

Hot-Swap Support

Voltage range: 38.4 VDC to 72 VDC (nominal 48 V to 60 V)

Max. power consumption: 84 W (depending on PoE operation) Max. current: 1.7A

Power and Active LEDs

Power over Ethernet (PoE)

FOX605 offers PoE (up to 15.4 W) and PoE+ (up to 32.4 W) on the Ethernet copper-based ports (except management port);There are three modes for configuring how the power will be reserved on each port: Allocated Mode The user specifies the Maximum Power that each port may use. Class Mode Each port automatically determines how much power to reserve, according to the class of the connected device; There are five different port classes:

Class Use Power Range [W] Description

0 Default 0.44 – 12.94 No Classification

1 Optional 0.44 – 3.84 Very Low Power

2 Optional 3.84 – 6.49 Low Power

3 Optional 6.49 – 12.95 Mid Power

4 802.3at – Type 2

12.95 – 25.5 High Power

In this mode the Maximum Power configuration has no effect;

LLDP-MED Mode Supported

—Weight & mechanics

Weights

FOX605 Weight (kg)

FOX605 Chassis 2,52

FOX605 with two PSUs 3,26

FOX605 packed with two PSUs 3,97

FOX605 packed with two PSUs and power cables

6,27

FOX605 PSU Weight (kg)

PSU stand alone 0,37

Packed in box 0,68

—Dimensions

The FOX605 is 1U high and is designed to be installed in 19-inch racks

Model (FOX605) Height Width Depth

Without mounting brackets & connectors

43 mm 443 mm 253 mm

Incl. connectors 43 mm 443 mm 273 mm

Incl. lateral mounting brackets & connectors

43 mm 443+2x20 mm 273 mm—ABB Switzerland Ltd. Power GridsGrid AutomationBruggerstrasse 72CH-5400 Baden, Switzerland

Phone: +41 84 484 58 45(Customer Support Center)

www.abb.com/communicationnetworks