Embed Size (px)
Citation preview
Commercial Solutions
C02 Finish glossary
C02 Commercial lock functions
C02 NZ handing guide
Locks and latchesC03 Legge 990 Series ordering procedure
C04 Legge 990 V Series
C05 Legge 990 C Series
C06 Legge 990 CD Series
C06 Legge 990 N Series
C07 Legge 990 D Series
C07 Legge 990 S Series
C08 Legge 995 Series ordering procedure
C09 Legge 995 V Series
C10 Legge 995 C Series
C11 Legge 990 and 995 Series accessories
C13 Schlage tubular latches
C13 Schlage 950 Series short backsets
C14 Legge G2 Series
C15 Schlage B250 Series deadbolts
C15 Legge nightlatch
Cylinders and keyingC16 Schlage padlocks
C17 Schlage SR restricted keying system
C17 Schlage cylinders
C18 Legge cylinders
C18 Legge keying
Door furnitureC19 Legge levers
C21 Door furniture ordering procedures
C26 Legge 67 Series
C27 Legge 6000 Series
C28 Legge 8000 Series
C30 Legge 500 Series
C34 Legge 700 Series
C39 Legge 800 Series
C41 Legge 5300 Series
C43 Legge 5400 Series
C44 Legge commercial furniture accessories
Pull handlesC45 Schlage stainless steel pull handles
C46 Pullhandlefixingoptionsanddrillingdetails
Door controlsC47 LCN 4031/4031T Series surface mounted closers
C48 LCN 1461/1461T Series surface mounted closers
C49 LCN 4040XP/4040XPT Series surface mounted closers
C49 LCN4040SentronicSeriesfire/lifesafetyclosers
C49 LCN4300SentronicSeriesfire/lifesafetyclosers
C49 USA handing guide
C50 Briton 1120 Series surface mounted closers
C51 Briton 1130 Series surface mounted closers
C51 Briton 2300 Series cam action closers
C52 Briton 2700 Series cam action closers
C52 Briton 2400 Series concealed cam action closers
C52 Briton transom closers
C53 Britonfloorsprings
C54 Briton 2800 pivot sets
C54 Briton 7500 pivot sets
C54 Ives pivot sets
C55 Briton door selectors
C55 Ivescoordinators,fillerbarsandmountingbrackets
C55 Glynn Johnson overhead door stops and holders
C56 Ivesflushboltsanddustproofstrikes
C56 Ives lock protectors
Exit devicesC57 Von Duprin 22 Series
C58 Von Duprin 33A Series
C59 Von Duprin 99 Series
C60 Von Duprin 88 Series
C61 VonDuprinChexit
C61 Von Duprin universal strikes
C62 Briton 370 Series
General hardwareC63 Legge satin stainless steel pull handles and push plates
C64 Legge door stops
C65 Leggewall/floormountedlatchbackdoorholders
C65 Legge stainless steel hinges
C66 Legge roller catches
C66 Leggeflushbolts
C66 Legge chain bolts
C66 Schlage cabinet locks
C66 Legge door guard
WashroomC67 Legge shower seats
C67 Legge indicator bolts
C67 Legge signage
C67 Legge grab rails
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869
V1.2
COM
MER
CIA
L Lo
cks
and
latc
hes
COM
MER
CIA
L Lo
cks
and
latc
hes
C02 **Refer page C49 for USA handing guide
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869
Finish Glossary*
These colours are indicative only, subject to limitations in the printing process.
ABZ ALUM ORB SBC CP
Antique Bronze Aluminium Oil Rubbed Bronze
Saturn Black Chrome
Chrome Plate
PB SCP SE SNP SSS
Polished Brass Satin Chrome Plate Silver Satin Nickel Plate Satin Stainless Steel
Commercial Lock FunctionsKeyed Locks
Entrance/Office Lock Push-button locking. Push-button locks outside lever until unlocked with key or by rotating inside lever.
Entrance Lock Turn/push-button locking; pushing and turning button locks outside handle requiring use of key until button is manually unlocked. Push-button locking; pushing button locks outside handle until unlocked by key or by turning inside handle.
Classroom Lock Outside handle locked and unlocked by key. Inside handle always unlocked.
Storeroom Lock Outside handle fixed. Entrance by key only. Inside handle always unlocked.
Hotel/Motel Lock Outside handle fixed. Entrance by key only. Push-button in inside handle activates visual occupancy indicator allowing only emergency masterkey to operate. Turning inside handle or closing door releases visual occupancy indicator. Rotation of inside spanner-button provides lockout feature by keeping indicator thrown.
Deadbolt/Deadlatch LocksSingle Cylinder and Turn Deadbolt Deadbolt thrown or retracted by key from outside or by inside turn unit. Bolt automatically deadlocks when fully thrown.
Double Cylinder Deadbolt Deadbolt thrown or retracted by key from either side. Bolt automatically deadlocks when fully thrown.
Nightlatch Deadlocking latchbolt retracted by key from outside or by inside turn unit. Rotating turn unit and activating hold-back feature keeps latch retracted.
Double Cylinder Deadlatch Deadlocking latchbolt retracted by key from either side. No hold-back feature.
NZ Handing Guide**
Right Hand Door
OPENING IN
OPENING OUT
Outside Outside
Left Hand Door
OPENING OUT
OPENING IN
**Refer page C54 for USA Handing guideC02
*Minimum order quantites and lead times apply. Contact customer services for more details.
V1.0
NZ Handing guide**
Outside
Left hand door
OPENING OUT
OPENING IN
Right hand door
OPENING IN
OPENING OUT
Outside
Finish glossaryThese colours are indicative only, subject to limitations in the printing process.
ABZ ALUM CP DKBZ ORB PB
Antique bronze Aluminium Chrome Plate Dark bronze Oil rubbed bronze Polished brass
SBC SBU SCP SE* SNP SSS
Satin black chrome
Satin brass unlacquered
Satin chrome plate
Silver Satin nickel plate Satin stainless steel
Commercial lock functions*Contact Allegion or look online for coating type
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C03
V1.2
COM
MER
CIA
L Lo
cks
and
latc
hes
COM
MER
CIA
L Lo
cks
and
latc
hes
Legge 990 Series
L9V 31 S 70
Function Sub-function Finish Backset
Vestibule . . . . . . . .L9V
Combination. . .L9C
Nightlatch . . . . . .L9N
Deadlock. . . . . . . .L9D
Sliding door . . . . L9S
refer following pages
Satin chrome. . . . . . S
* Refer to lock kits on page C11 for other finishes.
60mm . . . leave blank
70mm . . . . . . . . . . . . 70
89mm . . . . . . . . . . . . 89
127mm. . . . . . . . . .127
1. Function Select the desired function e.g. Vestibule lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L9V
2. Sub-function Select the required sub-function e.g. V31 Office/classroom locking latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L9V31
3. Finish Select the desired finish e.g. Satin chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L9V31S
4. Backset Nominate the non-standard backset if required e.g. 70mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L9V31S70
Note: Prices listed on following pages are for complete locks inclusive of case, cylinder, cams and adaptors Deduct $42.00 per cylinder not required
• 30 year mechanical warranty
Door type: Metal or timberBackset: 60mm standard. 70mm, 89mm and 127mm availableFire rated: 4 hours - refer fire door manufacturer for approvalDoor thickness: 32mm to 50mm - locks for doors up to 65mm thick available
Standard lock case only
Function Description Price
L9MFL9NL9DL9S
990MF Multi function case only990 N Series case only990 D Series case only990 S Series case only
170.00193.00202.00224.00
To convert the 990 Series lock cases to specific 990 functions you will require the appropriate cams and cam adaptors as indicated on the following pages.
Extended backset (V, C and N Series only)
Backset Price
70mm89mm127mm
add 88.00add 110.00add 154.00
Ordering procedure
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C04
V1.2
COM
MER
CIA
L Lo
cks
and
latc
hes
COM
MER
CIA
L Lo
cks
and
latc
hes
Legge 990 V Series
Function/sub-function Description Price
V7 (RH)V8 (LH)
Exterior and exit lockOutside key operates bolt at all times. Inside key locks and unlocks outside handle. Outside handle operative except when locked by inside key. Inside handle always unlocked
299.00
V9 (RH)V10 (LH)
Storeroom lockKey operates bolt at all times. Outside handle fixed. Inside handle always unlocked
251.00
V11 (RH)V12 (LH)
Single action lockKey operates bolt at all times. Inside handle always unlocked
251.00
V21 (RH)V22 (LH)
Vestibule lockKey locks and unlocks outside handle. Inside turn locks and unlocks outside handle. Outside handle operative except when locked by outside key or inside turn. Inside handle always unlocked
260.00
V25 (RH)V26 (LH)
Anti-lockout lockKey locks and unlocks outside handle. Inside turn locks and unlocks outside handle. Outside handle operative except when locked by outside key or inside turn. Inside handle always unlocked. Closing door or operating inside handle will unlock mechanism and make the outside handle operative
260.00
V29 (RH)V30 (LH)
Classroom lockKey locks and unlocks outside handle. The reverse turn of the key retracts the bolt. Outside handle operative except when locked by outside key. Inside handle always unlocked
260.00
V31 (RH)V32 (LH)
Office/classroom locking latchKey locks and unlocks outside handle. Outside handle operative except when locked by outside key.Inside handle always unlocked
251.00
V41 (RH)V42 (LH)
Exterior and exit lockInside turn locks and unlocks outside handle. Outside handle operative except when locked by inside turn. Inside handle always unlocked
212.00
V49 (RH)V50 (LH)
Exterior and exit lockInside key locks and unlocks outside handle. Outside handle operative except when locked by inside key. Inside handle always unlocked
251.00
V55 (RH)V56 (LH)
Exit latchOutside handle fixed. Inside handle always unlocked
197.00
V1 (RH)V2 (LH)
Vestibule lockKey operates bolt at all times. Inside turn locks and unlocks outside handle. Outside handle operative except when locked by inside turn. Inside handle always unlocked
260.00
1
1
1
5
5
8
2
6A
2
6A1
8A
6A
4A
2
Note: Refer to C19 and C20 for furniture
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C05
V1.2
COM
MER
CIA
L Lo
cks
and
latc
hes
COM
MER
CIA
L Lo
cks
and
latc
hes
Legge 990 C Series
Function/sub-function Description Price
C7 (RH)C8 (LH)
Double cylinder lockOutside key operates bolt at all times. Inside key locks and unlocks both handles. Both outside and inside handles operative except when locked by inside key
299.00
C21 (RH)C22 (LH)
Entry lockKey locks and unlocks both handles. Turn locks and unlocks both handles. Both outside and inside handles operative except when locked by outside key or inside turn
260.00
C23 (RH)C24 (LH)
Turn exit lockKey locks and unlocks both handles. Inside turn operates bolt at all times. Both outside and inside handles operative except when locked by outside key
260.00
C27 (RH)C28 (LH)
Double cylinder lockKeys lock and unlock both handles. Both outside and inside handles operative except when locked by either key
299.00
C31 (RH)C32 (LH)
Exterior door lockKey locks and unlocks both handles. Both outside and inside handles operative except when locked by outside key
251.00
C33 (RH)C34 (LH)
Privacy latchEmergency button unlocks both handles. Inside turn locks and unlocks both handles. Both outside and inside handles operative except when locked by inside turn
212.00
C41 (RH)C42 (LH)
Exterior privacy latchInside turn locks and unlocks both handles. Both outside and inside handles operative except when locked by inside turn
212.00
C49 (RH)C50 (LH)
Interior door lockInside key locks and unlocks both handles. Both outside and inside handles operative except when locked by inside key
251.00
C57 (RH)C58 (LH)
Passage latchBoth handles always operative
177.00
C1 (RH)C2 (LH)
Entry lockKey operates bolt at all times. Inside turn locks and unlocks both handles. Both outside and inside handles operative except when locked by inside turn
260.00
1 2
5 6A
2 1A
2 2
2
6A
6A
2
6A1
Note: Refer to C19 and C20 for furniture
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C06
V1.2
COM
MER
CIA
L Lo
cks
and
latc
hes
COM
MER
CIA
L Lo
cks
and
latc
hes
Legge 990 CD Series
Function/sub-function Description Price
CD21 (RH)CD22 (LH)
Entry lockKey locks and unlocks both handles and bolt. Inside turn locks and unlocks both handles and bolt. Both outside and inside handles operative except when locked by outside key or inside turn
268.00
CD27 (RH)CD28 (LH)
Double cylinder lockOutside key locks and unlocks both handles and bolt. Inside key locks and unlocks both handles and bolt. Both outside and inside handles operative except when locked by either key
305.00
CD31 (RH)CD32 (LH)
Exterior door lockKey locks and unlocks both handles and bolt. Both outside and inside handles operative except when locked by outside key
258.00
CD41 (RH)CD42 (LH)
Exterior privacy latchInside turn locks and unlocks both handles and bolt. Both outside and inside handles operative except when locked by inside turn
219.00
CD49 (RH)CD50 (LH)
Interior door lockKey locks and unlocks both handles and bolt. Both outside and inside handles operative except when locked by inside key
258.00
Legge 990 N Series
Function/sub-function Description Price
N1 (RH)N2 (LH)
NightlatchOutside key operates bolt. Inside turn operates bolt and hold back function
240.00
N3 Communicating door latchBoth keys operate bolt
295.00
N5 (RH)N6 (LH)
Cylinder latchOutside key operates bolt
240.00
N7 (RH)N8 (LH)
Exit door latchInside turn operates bolt and hold back function
192.00
N9 (RH)N10 (LH)
Fire door nightlatchOutside key operates bolt. Inside turn operates bolt
240.00
CD21(RH) & CD22(LH)
CD27(RH) & CD28(LH)
CD31(RH) & CD32(LH)
CD41(RH) & CD42(LH)
CD49(RH) & CD50(LH)
N1(RH) & N2(LH)
N3
N5(RH) & N6(LH)
N7(RH) & N8(LH)
N9(RH) & N10(LH)
CD21(RH) & CD22(LH)
CD27(RH) & CD28(LH)
CD31(RH) & CD32(LH)
CD41(RH) & CD42(LH)
CD49(RH) & CD50(LH)
N1(RH) & N2(LH)
N3
N5(RH) & N6(LH)
N7(RH) & N8(LH)
N9(RH) & N10(LH)
CD21(RH) & CD22(LH)
CD27(RH) & CD28(LH)
CD31(RH) & CD32(LH)
CD41(RH) & CD42(LH)
CD49(RH) & CD50(LH)
N1(RH) & N2(LH)
N3
N5(RH) & N6(LH)
N7(RH) & N8(LH)
N9(RH) & N10(LH)
CD21(RH) & CD22(LH)
CD27(RH) & CD28(LH)
CD31(RH) & CD32(LH)
CD41(RH) & CD42(LH)
CD49(RH) & CD50(LH)
N1(RH) & N2(LH)
N3
N5(RH) & N6(LH)
N7(RH) & N8(LH)
N9(RH) & N10(LH)
CD21(RH) & CD22(LH)
CD27(RH) & CD28(LH)
CD31(RH) & CD32(LH)
CD41(RH) & CD42(LH)
CD49(RH) & CD50(LH)
N1(RH) & N2(LH)
N3
N5(RH) & N6(LH)
N7(RH) & N8(LH)
N9(RH) & N10(LH)
5
2
2
2
6A
6A
2
Note: Refer to C19 and C20 for furniture
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C07
V1.2
COM
MER
CIA
L Lo
cks
and
latc
hes
COM
MER
CIA
L Lo
cks
and
latc
hes
Legge 990 D Series
Function/sub-function Description Price
D1 Entry deadlockKey operates bolt. Inside turn operates bolt
265.00
D3 Double cylinder deadlockBoth keys operate bolt
305.00
D5 Lock-up shop deadlockOutside key operates bolt
254.00
D7 Exit deadlockInside turn operates bolt
214.00
D9 (RH)D10 (LH)
Institutional deadlockKey operates bolt. Inside institutional turn operates bolt but slips when key operates cylinder
Note: Recommended for use with 500 or 700 Series furniture plates. 500 Series - 515 cylinder hole plate and 510/AH turn plate 700 Series - 715 cylinder hole plate and 710/AH turn plate
497.00
Legge 990 S SeriesFunction/sub-function Description Price
S1 Sliding door lockOutside key operates bolt. Inside turn operates bolt
288.00
S3 Sliding double cylinder deadlockBoth keys operate bolt
330.00
S5 Lock-up shop sliding door deadlockOutside key operates bolt
274.00
S7 Exit sliding door deadlockInside turn operates bolt
235.00
S33 Sliding door privacy latchEmergency button operates bolt. Inside turn operates bolt
235.00
D1
D3
D5
D7
D9/D10
S1
S3
S5
S7
S33
D1
D3
D5
D7
D9/D10
S1
S3
S5
S7
S33
D1
D3
D5
D7
D9/D10
S1
S3
S5
S7
S33
D1
D3
D5
D7
D9/D10
S1
S3
S5
S7
S33
D1
D3
D5
D7
D9/D10
S1
S3
S5
S7
S33
D1
D3
D5
D7
D9/D10
S1
S3
S5
S7
S33
D1
D3
D5
D7
D9/D10
S1
S3
S5
S7
S33
D1
D3
D5
D7
D9/D10
S1
S3
S5
S7
S33
D1
D3
D5
D7
D9/D10
S1
S3
S5
S7
S33
D1
D3
D5
D7
D9/D10
S1
S3
S5
S7
S33
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C08
V1.2
COM
MER
CIA
L Lo
cks
and
latc
hes
COM
MER
CIA
L Lo
cks
and
latc
hes
Legge 995 Series
L95V 31 W S 30
Function Sub-function Door type Finish Backset
Vestibule . . . . . . L95V
Combination L95C
refer following pages
Metal . . . . . leave blank
Timber/wood. . . . W
Satin chrome. . . . . . S
* Refer to lock kits on page C11 for other finishes.
23mm . . . leave blank
30mm . . . . . . . . . . . . 30
38mm . . . . . . . . . . . . 38
1. Function Select the desired function e.g. Vestibule lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L95V
2. Sub-function Select the required sub-function e.g. V31 Office/classroom locking latch . . . . . . . . . . . . . . . . . . . . . . . L95V31
3. Door type Nominate the non-standard door type if required e.g. Timber/wood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L95V31W
4. Finish Select the desired finish e.g. Satin chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L95V31WS
5. Backset Nominate the non-standard backset if required e.g. 30mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L95V31WS30
Note: Prices listed on following pages are for complete locks inclusive of case, cylinder, cams and adaptors Deduct $42.00 per cylinder not required.
• 30 year mechanical warranty
Door type: Metal standard. Faceplate to suit timber doors availableBackset: 23mm standard. 30mm and 38mm availableDoor thickness: 32mm to 50mm. Locks for doors up to 60mm thick available
Standard lock case only
Function Description Price
L95MF 995MF multi function case only 281.00
To convert the 995MF Series lock cases to specific 995MF functions you will require the appropriate cams and cam adaptors as indicated on the following pages.
Extended backset
Backset Price
30mm38mm
add 45.00add 55.00
Ordering procedure
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C09
V1.2
COM
MER
CIA
L Lo
cks
and
latc
hes
COM
MER
CIA
L Lo
cks
and
latc
hes
Legge 995 V Series
Function/sub-function Description Price
V7 (RH)V8 (LH)
Exterior and exit lockOutside key operates bolt at all times. Inside key locks and unlocks outside handle. Outside handle operative except when locked by inside key. Inside handle always unlocked
411.00
V9 (RH)V10 (LH)
Storeroom lockKey operates bolt at all times. Outside handle fixed. Inside handle always unlocked
368.00
V11 (RH)V12 (LH)
Single action lockKey operates bolt at all times. Inside handle always unlocked
366.00
V21 (RH)V22 (LH)
Vestibule lockKey locks and unlocks outside handle. Inside turn locks and unlocks outside handle. Outside handle operative except when locked by outside key or inside turn. Inside handle always unlocked
374.00
V31 (RH)V32 (LH)
Office/classroom locking latchKey locks and unlocks outside handle. Outside handle operative except when locked by outside key. Inside handle always unlocked
368.00
V41 (RH)V42 (LH)
Exterior and exit lockInside turn locks and unlocks outside handle. Outside handle operative except when locked by inside turn. Inside handle always unlocked
324.00
V49 (RH)V50 (LH)
Exterior and exit lockInside key locks and unlocks outside handle. Outside handle operative except when locked by inside key. Inside handle always unlocked
368.00
V55 (RH)V56 (LH)
Exit latchOutside handle fixed. Inside handle always unlocked
311.00
V1 (RH)V2 (LH)
Vestibule lockKey operates bolt at all times. Inside turn locks and unlocks outside handle. Outside handle operative except when locked by inside turn. Inside handle always unlocked
374.00V1(RH) & V2(LH)
V7(RH) & V8(LH)
V9(RH) & V10(LH)
V11(RH) & V12(LH)
V21(RH) & V22(LH)
V31(RH) & V32(LH)
V41(RH) & V42(LH)
V49(RH) & V50(LH)
V55(RH) & V56(LH)
V1(RH) & V2(LH)
V7(RH) & V8(LH)
V9(RH) & V10(LH)
V11(RH) & V12(LH)
V21(RH) & V22(LH)
V31(RH) & V32(LH)
V41(RH) & V42(LH)
V49(RH) & V50(LH)
V55(RH) & V56(LH)
V1(RH) & V2(LH)
V7(RH) & V8(LH)
V9(RH) & V10(LH)
V11(RH) & V12(LH)
V21(RH) & V22(LH)
V31(RH) & V32(LH)
V41(RH) & V42(LH)
V49(RH) & V50(LH)
V55(RH) & V56(LH)
V1(RH) & V2(LH)
V7(RH) & V8(LH)
V9(RH) & V10(LH)
V11(RH) & V12(LH)
V21(RH) & V22(LH)
V31(RH) & V32(LH)
V41(RH) & V42(LH)
V49(RH) & V50(LH)
V55(RH) & V56(LH)
V1(RH) & V2(LH)
V7(RH) & V8(LH)
V9(RH) & V10(LH)
V11(RH) & V12(LH)
V21(RH) & V22(LH)
V31(RH) & V32(LH)
V41(RH) & V42(LH)
V49(RH) & V50(LH)
V55(RH) & V56(LH)
V1(RH) & V2(LH)
V7(RH) & V8(LH)
V9(RH) & V10(LH)
V11(RH) & V12(LH)
V21(RH) & V22(LH)
V31(RH) & V32(LH)
V41(RH) & V42(LH)
V49(RH) & V50(LH)
V55(RH) & V56(LH)
V1(RH) & V2(LH)
V7(RH) & V8(LH)
V9(RH) & V10(LH)
V11(RH) & V12(LH)
V21(RH) & V22(LH)
V31(RH) & V32(LH)
V41(RH) & V42(LH)
V49(RH) & V50(LH)
V55(RH) & V56(LH)
V1(RH) & V2(LH)
V7(RH) & V8(LH)
V9(RH) & V10(LH)
V11(RH) & V12(LH)
V21(RH) & V22(LH)
V31(RH) & V32(LH)
V41(RH) & V42(LH)
V49(RH) & V50(LH)
V55(RH) & V56(LH)
V1(RH) & V2(LH)
V7(RH) & V8(LH)
V9(RH) & V10(LH)
V11(RH) & V12(LH)
V21(RH) & V22(LH)
V31(RH) & V32(LH)
V41(RH) & V42(LH)
V49(RH) & V50(LH)
V55(RH) & V56(LH)
Note: Refer to C19 and C20 for furniture
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C10
V1.2
COM
MER
CIA
L Lo
cks
and
latc
hes
COM
MER
CIA
L Lo
cks
and
latc
hes
Legge 995 C Series
Function/sub-function Description Price
C7 (RH)C8 (LH)
Double cylinder lockOutside key operates bolt at all times. Inside key locks and unlocks both handles. Both outside and inside handles operative except when locked by inside key
411.00
C21 (RH)C22 (LH)
Entry lockKey locks and unlocks both handles. Turn locks and unlocks both handles. Both outside and inside handles operative except when locked by outside key or inside turn
374.00
C23 (RH)C24 (LH)
Turn exit lockKey locks and unlocks both handles. Inside turn operates bolt at all times. Both outside and inside handles operative except when locked by outside key
374.00
C27 (RH)C28 (LH)
Double cylinder lockKeys lock and unlock both handles. Both outside and inside handles operative except when locked by either key
411.00
C31 (RH)C32 (LH)
Exterior door lockKey locks and unlocks both handles. Both outside and inside handles operative except when locked by outside key
368.00
C33 (RH)C34 (LH)
Privacy latchEmergency button unlocks both handles. Inside turn locks and unlocks both handles. Both outside and inside handles operative except when locked by inside turn
324.00
C41 (RH)C42 (LH)
Exterior privacy latchInside turn locks and unlocks both handles. Both outside and inside handles operative except when locked by inside turn
324.00
C49 (RH)C50 (LH)
Interior lockInside key locks and unlocks both handles. Both outside and inside handles operative except when locked by inside key
368.00
C57 (RH)C58 (LH)
Passage latchBoth handles always operative
311.00
C1 (RH)C2 (LH)
Entry lockKey operates bolt at all times. Inside turn locks and unlocks both handles. Both outside and inside handles operative except when locked by inside turn
374.00C1(RH) & C2(LH)
C7(RH) & C8(LH)
C21(RH) & C22(LH)
C23(RH) & C24(LH)
C27(RH) & C28(LH)
C31(RH) & C32(LH)
C33(RH) & C34(LH)
C41(RH) & C42(LH)
C49(RH) & C50(LH)
C57(RH) & C58(LH)
C1(RH) & C2(LH)
C7(RH) & C8(LH)
C21(RH) & C22(LH)
C23(RH) & C24(LH)
C27(RH) & C28(LH)
C31(RH) & C32(LH)
C33(RH) & C34(LH)
C41(RH) & C42(LH)
C49(RH) & C50(LH)
C57(RH) & C58(LH)
C1(RH) & C2(LH)
C7(RH) & C8(LH)
C21(RH) & C22(LH)
C23(RH) & C24(LH)
C27(RH) & C28(LH)
C31(RH) & C32(LH)
C33(RH) & C34(LH)
C41(RH) & C42(LH)
C49(RH) & C50(LH)
C57(RH) & C58(LH)
C1(RH) & C2(LH)
C7(RH) & C8(LH)
C21(RH) & C22(LH)
C23(RH) & C24(LH)
C27(RH) & C28(LH)
C31(RH) & C32(LH)
C33(RH) & C34(LH)
C41(RH) & C42(LH)
C49(RH) & C50(LH)
C57(RH) & C58(LH)
C1(RH) & C2(LH)
C7(RH) & C8(LH)
C21(RH) & C22(LH)
C23(RH) & C24(LH)
C27(RH) & C28(LH)
C31(RH) & C32(LH)
C33(RH) & C34(LH)
C41(RH) & C42(LH)
C49(RH) & C50(LH)
C57(RH) & C58(LH)
C1(RH) & C2(LH)
C7(RH) & C8(LH)
C21(RH) & C22(LH)
C23(RH) & C24(LH)
C27(RH) & C28(LH)
C31(RH) & C32(LH)
C33(RH) & C34(LH)
C41(RH) & C42(LH)
C49(RH) & C50(LH)
C57(RH) & C58(LH)
C1(RH) & C2(LH)
C7(RH) & C8(LH)
C21(RH) & C22(LH)
C23(RH) & C24(LH)
C27(RH) & C28(LH)
C31(RH) & C32(LH)
C33(RH) & C34(LH)
C41(RH) & C42(LH)
C49(RH) & C50(LH)
C57(RH) & C58(LH)
C1(RH) & C2(LH)
C7(RH) & C8(LH)
C21(RH) & C22(LH)
C23(RH) & C24(LH)
C27(RH) & C28(LH)
C31(RH) & C32(LH)
C33(RH) & C34(LH)
C41(RH) & C42(LH)
C49(RH) & C50(LH)
C57(RH) & C58(LH)
C1(RH) & C2(LH)
C7(RH) & C8(LH)
C21(RH) & C22(LH)
C23(RH) & C24(LH)
C27(RH) & C28(LH)
C31(RH) & C32(LH)
C33(RH) & C34(LH)
C41(RH) & C42(LH)
C49(RH) & C50(LH)
C57(RH) & C58(LH)
C1(RH) & C2(LH)
C7(RH) & C8(LH)
C21(RH) & C22(LH)
C23(RH) & C24(LH)
C27(RH) & C28(LH)
C31(RH) & C32(LH)
C33(RH) & C34(LH)
C41(RH) & C42(LH)
C49(RH) & C50(LH)
C57(RH) & C58(LH)
Note: Refer to C19 and C20 for furniture
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C11
V1.2
COM
MER
CIA
L Lo
cks
and
latc
hes
COM
MER
CIA
L Lo
cks
and
latc
hes
AccessoriesFinishes
Description ABZ ORB SBC CP PB SCP Price
R13 Rebate kit for 990 V, C, CD, N Series L9RA L9RORB L9RSBC L9RC L9RP L9RS 80.00
DR13 Rebate kit for 990 D Series L9DRA L9DRORB L9DRSBC L9DRC L9DRP L9DRS 80.00
LL40 40mm Short lipped strike LY9-LL40A LY9-LL40ORB LY9-LL40SBC LY9-LL40C LY9-LL40P LY9-LL40S 30.00
LL50 50mm Long lipped strike LY9-LL50A LY9-LL50ORB LY9-LL50SBC LY9-LL50C LY9-LL50P LY9-LL50S 30.00
LL60 60mm Long lipped strike LY9-LL60A LY9-LL60ORB LY9-LL60SBC LY9-LL60C LY9-LL60P LY9-LL60S 30.00
LL70 70mm Long lipped strike LY9-LL70A LY9-LL70ORB LY9-LL70SBC LY9-LL70C LY9-LL70P LY9-LL70S 30.00
LL80 80mm Long lipped strike LY9-LL80A LY9-LL80ORB LY9-LL80SBC LY9-LL80C LY9-LL80P LY9-LL80S 30.00
LL90 90mm Long lipped strike LY9-LL90A LY9-LL90ORB LY9-LL90SBC LY9-LL90C LY9-LL90P LY9-LL90S 30.00
Special finish lock kitsFinishes
Description ABZ ORB SBC CP PB Price
990 Special finish lock kit (screws, striker and outer forend)
L990ABZ L990ORB L990SBC L990CP L990PB 52.50
995 Special finish lock kit (screws, striker and outer forend metal)
L995MABZ L995MORB L995MSBC L995MCP L995MPB 84.00
995 Special finish lock kit (screws, striker and outer forend timber)
L995WABZ L995WORB L995WSBC L995WCP L995WPB 84.00
Legge 990 and 995 Series accessories
PartsFinish
Description SCP Price
990 Outer forend V, C and N Z994062 12.00
990 Outer forend D and S Z994442 12.00
990 Strike plate V, C and N Z994072 18.50
995 Strike plate V and C Z995082 18.50
990 Strike plate D and S Z990462 18.50
990 Screw pack V, C and N Z994090 3.00
995 Screw pack metal Z995120 8.30
995 Screw pack timber Z995130 5.30
990 Screw pack D and S Z990480 3.00
995 Forend metal (995-FM) Z995092 26.00
995 Forend timber (995-FW) Z995103 50.50
990 Extension kit 55–75mm (screws, 50mm striker, spindles and cylinder) L9EXT50S 93.50
990 Extension kit 55–75mm (screws, 60mm striker, spindles and cylinder) L9EXT60S 93.50
990 Cylinder retaining screw Z994081 3.50
995 Cylinder retaining screw Z995035 1.30
990/995 Spindle pack V Z990085 5.30
990/995 Extended split spindle (each) Z990451 1.80
990 Strike dust box (plastic) Z990080 0.80
995 Strike dust box (metal) Z995072 3.50
Note: Allow 30 working days for special finish orders. Minimum order charges may apply.
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C12
V1.2
COM
MER
CIA
L Lo
cks
and
latc
hes
COM
MER
CIA
L Lo
cks
and
latc
hes
Cams and adaptorsDescription Handing Code Price
#1 Cam (990/995) Z990201 0.70
#1A Cam adapter (990/995) Z990202 11.50
#2 Cam (990/995) Z990204 0.70
#3 Cam (990) Z990206 0.70
#3A Cam adapter (990) Z990199 11.50
#4A Cam adapter anti-lockout (990) LH RH
Z990208Z990209
11.5011.50
#5 Cam (990/995) Z990211 0.70
#6A Cam adapter (990/995) Z990214 11.50
#7A Cam adapter (990) Z990222 11.50
#8 Cam (990) LH RH
Z990216Z990218
0.700.70
#8A Cam adapter (990) Z990223 11.50
1
5
1A
3
6A
8A
2
Legge 990 and 995 Series accessories
4A-LH 4A-RH
8-LH 8-RH
3A
7A
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C13
V1.2
COM
MER
CIA
L Lo
cks
and
latc
hes
COM
MER
CIA
L Lo
cks
and
latc
hes
Cams and adaptorsDescription Handing Code Price
#1 Cam (990/995) Z990201 0.70
#1A Cam adapter (990/995) Z990202 11.50
#2 Cam (990/995) Z990204 0.70
#3 Cam (990) Z990206 0.70
#3A Cam adapter (990) Z990199 11.50
#4A Cam adapter anti-lockout (990) LH RH
Z990208Z990209
11.5011.50
#5 Cam (990/995) Z990211 0.70
#6A Cam adapter (990/995) Z990214 11.50
#7A Cam adapter (990) Z990222 11.50
#8 Cam (990) LH RH
Z990216Z990218
0.700.70
#8A Cam adapter (990) Z990223 11.50Model Description Finish Code Price
951 Timber forend for lock body SSS SCL10361 10.50
951 Timber forend for strike box SSS SCL10362 10.50
Accessories
Schlage Tubular latches• 10 year mechanical warranty
Note: Not suitable for unsprung door furniture or heavy duty applications.
DescriptionSpindle size
(mm)Finish Code Price
3722 LIght duty commercial tubular latch - 60mm backset
7.6 SSS L3722SB 19.00
Universal rebate kit SCP SRL14340 15.50
12081 Tubular bolt (suits star spindle) 4.5 SSS DAX12081SSS-01 13.50
Star spindle brass 4.5 x 85 ZSS 2.30
Legge 950 Series short backset deadlocks
• 10 year mechanical warranty
Door thickness: 32mm to 55mmBolt throw: 950 - 37mm, 951 - 28mm
Model Description Finish Code Price
951 Sliding 23mm deadlock single cylinder with turn, double cylinder, self latching strike and aluminium forend
SCP SCL10356 103.00
951 Dual 30mm deadlock and sliding deadlock. Single cylinder with turn, double cylinder, self latching strike and wooden forend
SCP SCL10364 273.00
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C14
V1.2
COM
MER
CIA
L Cy
linde
rs a
nd k
eyin
g
COM
MER
CIA
L Cy
linde
rs a
nd k
eyin
g
COM
MER
CIA
L Lo
cks
and
latc
hes
COM
MER
CIA
L Lo
cks
and
latc
hes
Legge G2 Series• 10 year mechanical warranty
Backset: Deadbolt - 60/70mm adjustable Orbit and Neptune - 70mm standard, 60mm and 127mm available
Fire rated: Refer fire door manufacturer for approval
DeadboltFinish
Description SCP Price
Door thickness: 32mm to 50mm
G160 Single cylinder and turn deadbolt G2BOLTSCS 58.00
G162 Double cylinder deadbolt G2BOLTDCS 62.50
OrbitFinish
Description SSS Price
Door thickness: 32mm to 50mm
G50PD Entrance lock G2OENTS 57.50
NeptuneFinish
Description SCP Price
Door thickness: 32mm to 50mm
G10S Passage latch G2NPASS 116.00
G40S Privacy latch G2NPRIS 135.00
G50PD Entrance lock G2NENTS 143.00
G66PD Entrance lock double cylinder G2NDCENTS 152.00
G70PD Classroom lock G2NCLASS 143.00
G80PD Storeroom lock G2NSTRS 143.00
G170 Single dummy trim G2NDUMS 56.00
Door thickness: 45mm to 60mm
G10S Passage latch G2NPASTS 209.00
G50PD Entrance lock G2NENTTS 262.00
G70PD Classroom lock G2NCLASTS 262.00
AccessoriesFinish
Description SCP Price
60mm Deadlatch G2-60DLS 19.00
60mm Springlatch G2-60SLS 19.00
127mm Extension kit (60mm dead latch required, G2-60DLS) G3-127DLS 34.00
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C15
V1.2
COM
MER
CIA
L Cy
linde
rs a
nd k
eyin
g
COM
MER
CIA
L Cy
linde
rs a
nd k
eyin
g
COM
MER
CIA
L Lo
cks
and
latc
hes
COM
MER
CIA
L Lo
cks
and
latc
hes
Schlage B250 Series deadbolts• 10 year mechanical warranty
Backset: 70mm standard, 60mm available
Door thickness: 35mm to 44mm
Finish
Description SCP Price
B250PD Single cylinder and turn nightlatch SCL13088 389.00
Accessories and partsFinish
Description SCP Price
60mm Latchbolt SLP17477 INDENT
70mm Latchbolt SLP23573 INDENT
Rebate kit to suit B60, B250, B500 SLP23674 88.00
Legge Nightlatch • 10 year mechanical warranty
Finish
Description SSS Price
454 Nightlatch less cylinder L454SSS 64.50
Accessories and partsFinish
Description SCP Price
66 Nightlatch cylinder L66S 33.50
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C16
V1.2
COM
MER
CIA
L Cy
linde
rs a
nd k
eyin
g
COM
MER
CIA
L Cy
linde
rs a
nd k
eyin
g
C16
Schlage Padlocks• 10 year mechanical warranty Features and benefits: Meet or exceed ASTM standards for standard steel shackle, corrosion resistance Molybdenum hardened steel shackle offers greater cut resistance, conventional key-in-knob cylinder. Material: Solid brass body resists corrosion for all-weather performance.
Description Code Price
Schlage 23 Series brass padlock 38mm x 8mm KR-KS23D2300 83.00
Schlage 23 Series brass padlock 51mm x 8mm 102mm x 8mm
KR-KS23F2300KR-KS23G2300
93.50106.00
Schlage 72 Series steel padlock 51mm x 11mm KR-KS72F2300 125.00
Schlage locking cable key-in-knob cylinder 1.8mm x 15mm KR-KC215E220 240.00
Accessories
Description Code Price
Schlage key retaining locking cam KR-KZ32CB1 4.20
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C17
V1.2
COM
MER
CIA
L Cy
linde
rs a
nd k
eyin
g
COM
MER
CIA
L Cy
linde
rs a
nd k
eyin
g Schlage SR restricted keying system
Note: Included in the price of cylinders is the surcharge for master keying (MK) or keying alike (KA) to any level and stamping of the cylinder. All cylinders are supplied with a quantity of 2 keys per change, including cutting, stamping and colour identification studs.
The default colours are: Master keys = red; change keys = blue. Please refer to Schlage SR technical data sheet to select and specify alternative colours.
Finishes
Description SBC SCP Price
Master keyed oval cylinders
6 Pin oval cylinder - SR1 keywaySR1-OVAL-SBC
SR1-OVAL-SCP 90.00120.00
6 Pin extended oval cylinder (50mm) - SR1 keyway
SR1-OVAL-EXT-SCP 120.00
Master keyed PD cylinders
6 Pin PD cylinder - SR1 keyway SR1-PD-SCP 70.00
Master keyed rim cylinders
6 Pin rim cylinder - SR1 keyway SR1-RIM-SCP 100.00
Master keyed round mortice cylinders
6 Pin round mortice cylinder - SR1 keyway SR1-MORTICE-SCP 120.00
Master keyed euro cylinders
6 Pin euro lazy cam double cylinder - SR1 keyway
SR1-EURO-LC-SCP 160.00
6 Pin euro fixed cam double cylinder - SR1 keyway
SR1-EURO-FC-SCP 160.00
6 Pin euro fixed cam single cylinder and turn - SR1 keyway
SR1-EURO-CT-SCP 140.00
6 Pin euro fixed cam half cylinder- SR1 keyway SR1-EURO-HC-SCP 100.00
Schlage 23 Series brass padlock 38mm X 8mm(includes SR1 PD cylinder master keyed with two keys)
SR1-KS23D2300 162.00
Schlage Cylinders• 10 year mechanical warranty Note: Cylinders are classic keyway and are supplied with 2 keys
Finish
Description SCP Price
A Series 5 pin standard cylinder SLP15932 30.00
A Series 6 pin standard cylinder SLP15940C/SC 70.50
A Series 6 pin orbit cylinder SLP16819 70.50
Oval cylinder 6 pin cylinder L17362C 77.00
Rim cylinder 6 pin cylinder SLP26015 122.00
Round mortice 6 pin cylinder SLP26009 122.00
• 10 year mechanical warranty
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C18
V1.2
COM
MER
CIA
L Cy
linde
rs a
nd k
eyin
g
COM
MER
CIA
L Cy
linde
rs a
nd k
eyin
g
Legge CylindersNote: Cylinders are supplied with 2 keys.Allow 30 working days for special finish orders. Minimum order charges may apply.
Finishes
Description ABZ ORB SBC CP PB SCP Price
Standard oval cylinder C4 keyway(Suit door thickness 32mm to 54mm)
Z990300 42.00
Z990303 Z990305 Z990304 Z990301 Z990302 63.00
Extended oval cylinder C4 keyway(Suit door thickness 55mm to 75mm)
Z990235 84.00
Z990237 Z990240 Z990238 Z990236 Z990239 105.00
Legge KeyingNote: The following charges are applicable to Legge oval cylinders and all Schlage pin tumbler locks
Description Code Price
Keys
Charge is per key
Standard key (includes cutting) LK7 13.00
Restricted key (includes cutting, applies to Primus and Everest) LK21 32.00
SR1 key (includes cutting) Z-LK3-KC 15.00
Keying options
Charge is per lock
Master keying (excludes keys) LK1 30.00
Construction keying (excludes keys) LK2 30.00
Key alike (excludes keys) LK3 30.00
Note: LK7 will need to be added per key to allow for keys when LK1,LK2 or LK3 are ordered
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C19
V1.2
COM
MER
CIA
L Cy
linde
rs a
nd k
eyin
g
COM
MER
CIA
L Cy
linde
rs a
nd k
eyin
g
COM
MER
CIA
L D
oor f
urni
ture
Legge CylindersNote: Cylinders are supplied with 2 keys.Allow 30 working days for special finish orders. Minimum order charges may apply.
#29 Alpha #55 Alessandro LH/RH
#57 Angelo Bergen
#51 Chagall LH/RH #15 Diablo
#12 Leonardo #50 Monet
#52 Renoir #27 Salvador
Legge Levers
Price code 1
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C20
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge Levers
#59 Cisa #62 Ergo
Neptune Omega
#56 Rubens #61 Trilo
Price code 2
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C21
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 67 Series ordering procedure
L A 67L SBrand Lever design Rose function
codeFinish
Legge . . . . . . . . . . . . . . . L Alpha . . . . . . . . . . . . . . . A
Bergen. . . . . . . . . . . . . . B
Neptune. . . . . . . . . . . .N
Omega. . . . . . . . . . . . . .O
Latch furniture . . . . . . . . . 67
LR lock/latch furniture . . . . . . . .67L
External half set . . . . . . . . 67LE
Internal half set . . . . . . . . . 67LI
Satin chrome. . . . . . S
Chrome . . . . . . . . . . . . C
Polished brass. . . . P
Satin black chrome . . . . . . . . . . SBC
Satin brass unlacquered. . . .SBU
Oil rubbed bronze. . . . . . . . . . ORB
Antique bronze . . . . . . . . . . . . . . A
1. Lever design Select the desired lever design e.g. Alpha. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LA
2. Rose function Select the required rose function e.g. LR lock/latch furniture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LA67L
3. Finish Select the desired finish e.g. Satin chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LA67LS
Ordering procedure for Alpha, Bergen, Neptune and Omega designs
Ordering procedure for all other lever designs
L67 /51 L L E SBrand/series Lever design Rose function
codeHand Rose function
codeFinish
Legge . . . . . . . . . . . . L67 Refer pages C19-C20
Latch furniture
. . . . . . . . . . . . leave blank
LR lock/latch furniture . . . . . . . . . . . L
Non handed . . . . . . . . . . . . . . leave blank
Right hand . . . . . . . . R
Left hand . . . . . . . . . . L
Leave blank if full set is required
External half set . E
Internal half set . . . I
Satin chrome. . . . . . S
Chrome . . . . . . . . . . . . C
Polished brass. . . . P
Satin black chrome . . . . . . . . . . SBC
Satin brass unlacquered. . . .SBU
Oil rubbed bronze. . . . . . . . . . ORB
Antique bronze. . . . . . . . . . . . . . A
1. Brand series Nominate the series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L67
2. Lever design Select the desired lever design e.g. # 51 Chagall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L67/51
3. Rose function Select the required rose function e.g. LR lock/latch furniture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L67/51L
4. Hand If the lever design is asymmetrical select the required hand e.g. Left hand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L67/51LL
5. Rose function If a half set is required select the required side e.g. External half set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .L67/51LLE
6. Finish Select the desired finish e.g. Satin chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L67/51LLES
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C22
V1.2
COM
MER
CIA
L D
oor f
urni
ture L A 802 R S
Brand Lever design Plate function code
Hand Finish
Legge . . . . . . . . . . . . . . . L Alpha . . . . . . . . . . . . . . . A
Bergen. . . . . . . . . . . . . . B
Refer pages
C39-C40
Right hand . . . . . . . . R
Left hand . . . . . . . . . . L
Satin chrome. . . . . . S
1. Lever design Select the desired lever design e.g. Alpha. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LA
2. Plate function Select the required plate function e.g. 802 External plate with cylinder hole. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LA802
3. Hand If the lever design is asymmetrical select the required hand e.g. Right hand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LA802R
4. Finish Select the desired finish e.g. Satin chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LA802RS
Legge 800 Series ordering procedure
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C23
V1.2
COM
MER
CIA
L D
oor f
urni
tureL 6002 /51 R S
Brand Rose function code
Lever design Hand Finish
Legge . . . . . . . . . . . . . . . L Lever furniture . . . . . .6000
Half set . . . . . . . .6001
Fixed half set . . . . . . . .6002 Blank rose . . . .6003
Passage set. . .6005
Privacy set . . . .6006
Bergen. . . . . . . . . . . . . . B
Neptune. . . . . . . . . . . .N
Refer pages C19-C20
Non handed . . . leave blank
Right hand . . . . . . . . R
Left hand . . . . . . . . . . L
Satin chrome. . . . . . S
Chrome . . . . . . . . . . . . C
Polished brass. . . . P
Satin black chrome . . . . . . . . . . SBC
Satin brass unlacquered. . . .SBU
Oil rubbed bronze. . . . . . . . . . ORB
Antique bronze. . . . . . . . . . . . . . A
1. Rose function Select the required rose function e.g. 6002 fixed half set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L6002
2. Lever design Select the desired lever design e.g. # 51 Chagall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L6002/51
3. Hand If the lever design is asymmetrical select the required hand e.g. Right hand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L6002/51R
4. Finish Select the desired finish e.g. Satin chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L6002/51RS
L 8002 /51 R SBrand Rose function
codeLever design Hand Finish
Legge . . . . . . . . . . . . . . . L Lever furniture . . . . . .8000
Half set . . . . . . . .8001
Fixed half set . . . . . . . .8002 Blank rose . . . .8003
Passage set. . .8005
Privacy set . . . .8006
Bergen. . . . . . . . . . . . . . B
Neptune. . . . . . . . . . . .N
Refer pages C19-C20
Non handed . . . leave blank
Right hand . . . . . . . . R
Left hand . . . . . . . . . . L
Satin chrome. . . . . . S
Chrome . . . . . . . . . . . . C
Satin black chrome . . . . . . . . . . SBC
1. Rose Function Select the required rose function e.g. 8000 fixed half set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L8000
2. Lever Design Select the desired lever design e.g. # 51 Chagall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L8002/51
3. Hand If the lever design is asymmetrical select the required hand e.g. Right Hand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L8005/51R
4. Finish Select the desired finish e.g. Satin chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L8006/51RS
Legge 6000 Series ordering procedure
Legge 8000 Series ordering procedure
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C24
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 500 and 700 Series ordering procedure
L A 502 SBrand Lever design Plate function
codeFinish
Legge . . . . . . . . . . . . . . . L Alpha . . . . . . . . . . . . . . . A
Bergen. . . . . . . . . . . . . . B
Neptune. . . . . . . . . . . .N
Omega. . . . . . . . . . . . . .O
Refer to pages
C30-C38
Satin chrome. . . . . . S
Chrome . . . . . . . . . . . . C
Polished brass. . . . P
Satin black chrome . . . . . . . . . . SBC
Satin brass unlacquered. . . .SBU
Oil rubbed bronze. . . . . . . . . . ORB
Antique bronze. . . . . . . . . . . . . . A
1. Lever design Select the desired lever design e.g. Alpha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LA
2. Plate function Select the required plate function e.g. 502 External plate with cylinder hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LA502
3. Finish Select the desired finish e.g. Satin chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LA502S
L 502 /51 R SBrand Plate function
codeLever design Hand Finish
Legge . . . . . . . . . . . . . . . L Refer following pages
Refer pages C19-C20
Non handed . . . leave blank
Right hand . . . . . . . . R
Left hand . . . . . . . . . . L
Satin chrome. . . . . . S
Chrome plate . . . . . C
Polished brass. . . . P
Satin black chrome . . . . . . . . . . SBC
Satin brass unlacquered. . . .SBU
Oil rubbed bronze. . . . . . . . . . ORB
Antique bronze. . . . . . . . . . . . . . A
1. Plate function Select the required plate function e.g. 502 External plate with cylinder hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L502
2. Lever design Select the desired lever design e.g. # 51 Chagall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L502/51
3. Hand If the lever design is asymmetrical select the required hand e.g. Right hand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L502/51R
4. Finish Select the desired finish e.g. Satin chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L502/51RS
Ordering procedure for Alpha, Bergen, Neptune and Omega designs
Ordering procedure for all other lever designs
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C25
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 5300 and 5400 Series ordering procedure
L 5303 /51 R S MBrand Plate function
codeLever design Hand Finish Lock type
Legge . . . . . . . . . . . . . . . L Refer pages
C41-C43
Bergen. . . . . . . . . . . . . . B
Neptune. . . . . . . . . . . .N
Refer pages C19-C20
Non handed . . . leave blank
Right hand . . . . . . . . R
Left hand . . . . . . . . . . L
Satin chrome. . . . . . S
Chrome . . . . . . . . . . . . C
Polished brass. . . . P
Satin black chrome . . . . . . . . . . SBC
Satin brass unlacquered. . . .SBU
Oil rubbed bronze. . . . . . . . . . ORB
Antique bronze. . . . . . . . . . . . . . A
995MF . . . leave blank
990MF . . . . . . . . . . . . . M
1. Plate function Select the required plate function e.g. 5303 Internal plate with turn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L5303
2. Lever design Select the desired lever design e.g. # 51 Chagall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L5303/51
3. Hand If the lever design is asymmetrical select the required hand e.g. Right hand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L5303/51R
4. Finish Select the desired finish e.g. Satin chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L5303/51RS
5. Lock type Nominate the non-standard lock type if required e.g. Legge 990MF Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L5303/51RSM
Lever and backset compatibility
Design Leonardo Diablo Salvador Alpha Monet Chagall Renoir Alessandro
Lever 12 15 27 29 50 51 52 55
30mm 23mm 30mm 23mm 23mm 30mm 30mm 23mm
Design Rubens Angelo Cisa Trilo Ergo Bergen Neptune
Lever 56 57 59 61 62
38mm 30mm 23mm 30mm 30mm 30mm 30mm
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C26
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 67 Series• 30 year mechanical warranty
Door thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C44).Note: Handing only required for half sets, refer page C21 for ordering procedure.Allow 10 working days for any SCP product not in stock at time of order.Allow 30 working days for special finish orders. Minimum order charges may apply.
FurnitureModel Description Finishes Alpha Price code 1 Price code 2
67
LR67
External LR67
Internal LR67
L67EBR
L67IBR
22 - Forged Brass
23 - Forged Brass
24 - Forged Brass
26 - Pressed Steel
27 - Pressed Steel
28 - Pressed Steel
67 Latch furniture set SCP CP, PB, ORB,
SBC, SBU, ABZ
207.00260.00
214.00272.00
255.00322.00
67L LR Lock/latch furniture set SCP CP, PB, ORB,
SBC, SBU, ABZ
207.00260.00
214.00272.00
255.00322.00
67LE External half set SCP CP, PB, ORB,
SBC, SBU, ABZ
107.00135.00
111.00141.00
129.00162.00
67LI Internal half set SCP CP, PB, ORB,
SBC, SBU, ABZ
107.00135.00
111.00141.00
129.00162.00
67
LR67
External LR67
Internal LR67
L67EBR
L67IBR
22 - Forged Brass
23 - Forged Brass
24 - Forged Brass
26 - Pressed Steel
27 - Pressed Steel
28 - Pressed Steel
67EB External blank rose SCP CP, PB, ORB,
SBC, SBU, ABZ
56.0071.00
67
LR67
External LR67
Internal LR67
L67EBR
L67IBR
22 - Forged Brass
23 - Forged Brass
24 - Forged Brass
26 - Pressed Steel
27 - Pressed Steel
28 - Pressed Steel
67IB Internal blank rose SCP CP, PB, ORB,
SBC, SBU, ABZ
56.0071.00
EscutcheonsModel Description Finishes Price
67
LR67
External LR67
Internal LR67
L67EBR
L67IBR
22 - Forged Brass
23 - Forged Brass
24 - Forged Brass
26 - Pressed Steel
27 - Pressed Steel
28 - Pressed Steel
22 Forged brass cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
34.5045.50
67
LR67
External LR67
Internal LR67
L67EBR
L67IBR
22 - Forged Brass
23 - Forged Brass
24 - Forged Brass
26 - Pressed Steel
27 - Pressed Steel
28 - Pressed Steel
23 Forged brass turn SCP CP, PB, ORB,
SBC, SBU, ABZ
69.5087.50
67
LR67
External LR67
Internal LR67
L67EBR
L67IBR
22 - Forged Brass
23 - Forged Brass
24 - Forged Brass
26 - Pressed Steel
27 - Pressed Steel
28 - Pressed Steel
24 Forged brass emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
64.0080.00
67
LR67
External LR67
Internal LR67
L67EBR
L67IBR
22 - Forged Brass
23 - Forged Brass
24 - Forged Brass
26 - Pressed Steel
27 - Pressed Steel
28 - Pressed Steel
26 Pressed brass cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
22.5027.00
67
LR67
External LR67
Internal LR67
L67EBR
L67IBR
22 - Forged Brass
23 - Forged Brass
24 - Forged Brass
26 - Pressed Steel
27 - Pressed Steel
28 - Pressed Steel
27 Pressed brass turn SCP CP, PB, ORB,
SBC, SBU, ABZ
48.0060.50
67
LR67
External LR67
Internal LR67
L67EBR
L67IBR
22 - Forged Brass
23 - Forged Brass
24 - Forged Brass
26 - Pressed Steel
27 - Pressed Steel
28 - Pressed Steel28 Pressed brass emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
45.5058.00
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C27
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 6000 Series• 10 year mechanical warranty
Door thickness: Lock/latch: 32mm to 50mm, passage: 32mm to 50mm, privacy: 32mm to 42mm.Note: Handing only required for half sets, refer page C23 for ordering procedure.Allow 10 working days for any SCP product not in stock at time of order.Allow 30 working days for special finish orders. Minimum order charges may apply.
FurnitureModel Description Finishes Price code 1 Price code 2
6007
6008
6009
6010
6012
6013
6014
6015
6000
6001
6002
6003
6005
6006
6000 Lock/latch furniture set SCP CP, PB, ORB,
SBC, SBU, ABZ
182.00228.00
221.00278.00
6007
6008
6009
6010
6012
6013
6014
6015
6000
6001
6002
6003
6005
6006
6001 Half set SCP CP, PB, ORB,
SBC, SBU, ABZ
91.50114.00
109.00138.00
6007
6008
6009
6010
6012
6013
6014
6015
6000
6001
6002
6003
6005
6006
6002 Half set fixed SCP CP, PB, ORB,
SBC, SBU, ABZ
91.50114.00
109.00138.00
6007
6008
6009
6010
6012
6013
6014
6015
6000
6001
6002
6003
6005
6006
6003 Blank rose SCP CP, PB, ORB,
SBC, SBU, ABZ
54.5068.00
6007
6008
6009
6010
6012
6013
6014
6015
6000
6001
6002
6003
6005
6006
6005 Passage set - 60mm latch SCP CP, PB, ORB,
SBC, SBU, ABZ
202.00253.00
239.00300.00
6007
6008
6009
6010
6012
6013
6014
6015
6000
6001
6002
6003
6005
60066006 Privacy set - 60mm latch SCP CP, PB, ORB,
SBC, SBU, ABZ
246.00309.00
285.00355.00
EscutcheonsModel Description Finishes Price
6007
6008
6009
6010
6012
6013
6014
6015
6000
6001
6002
6003
6005
6006
6007 Turn SCP CP, PB, ORB,
SBC, SBU, ABZ
33.5071.506007
6008
6009
6010
6012
6013
6014
6015
6000
6001
6002
6003
6005
6006
6008 Cylinder SCP CP, PB, ORB,
SBC, SBU, ABZ
22.0048.50
6007
6008
6009
6010
6012
6013
6014
6015
6000
6001
6002
6003
6005
6006
6009 Emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
33.5071.50
6010 Large turn SCP CP, PB, ORB,
SBC, SBU, ABZ
44.5088.00
6007
6008
6009
6010
6012
6013
6014
6015
6000
6001
6002
6003
6005
6006
6012 Euro profile cylinder SCP CP, PB, ORB,
SBC, SBU, ABZ
22.0048.50
6007
6008
6009
6010
6012
6013
6014
6015
6000
6001
6002
6003
6005
6006
6013 Indicating turn SCP CP, PB, ORB,
SBC, SBU, ABZ
35.5082.00
6014 Indicating emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
34.5086.00
6015 Indicating large turn SCP CP, PB, ORB,
SBC, SBU, ABZ
48.50101.00
6054 Accessible turn LH/RH SCP CP, PB, ORB,
SBC, SBU, ABZ
77.00116.00
6054LIND6054RIND
Indicating accessible turn (LH)*Indicating accessible turn (RH)*
SCP CP, PB, ORB,
SBC, SBU, ABZ
88.00128.00
6007
6008
6009
6010
6012
6013
6014
6015
6000
6001
6002
6003
6005
6006
6007
6008
6009
6010
6012
6013
6014
6015
6000
6001
6002
6003
6005
6006
6007
6008
6009
6010
6012
6013
6014
6015
6000
6001
6002
6003
6005
6006
* No hand selection required for ordering.
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C28
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 8000 Series• 10 year mechanical warranty
Door thickness: Lock/latch: 32mm to 50mm, passage: 32mm to 50mm, privacy: 32mm to 42mm.Note: Handing only required for half sets, refer page C23 for ordering procedure.Allow 10 working days for any SCP product not in stock at time of order.Allow 30 working days for special finish orders. Minimum order charges may apply.
FurnitureModel Description Finishes Price code 1 Price code 2
8000
8001
8002
8003
8005
8006
8007
8008
8009
8010
8012
8013
8014
8015
8000 Lock/latch furniture set SCPCP, SBC
190.00238.00
227.00285.00
8000
8001
8002
8003
8005
8006
8007
8008
8009
8010
8012
8013
8014
8015
8001 Half set SCPCP, SBC
94.50118.00
116.00144.00
8000
8001
8002
8003
8005
8006
8007
8008
8009
8010
8012
8013
8014
8015
8002 Half set fixed SCPCP, SBC
94.50118.00
116.00144.00
8000
8001
8002
8003
8005
8006
8007
8008
8009
8010
8012
8013
8014
8015
8003 Blank rose SCPCP, SBC
58.5072.50
8000
8001
8002
8003
8005
8006
8007
8008
8009
8010
8012
8013
8014
8015
8005 Passage set - 60mm latch SCPCP, SBC
208.00263.00
248.00312.00
8000
8001
8002
8003
8005
8006
8007
8008
8009
8010
8012
8013
8014
8015
8006 Privacy set - 60mm latch SCPCP, SBC
252.00318.00
295.00370.00
EscutcheonsModel Description Finishes Price
8000
8001
8002
8003
8005
8006
8007
8008
8009
8010
8012
8013
8014
8015
8007 Turn SCPCP, SBC
63.0079.00
8000
8001
8002
8003
8005
8006
8007
8008
8009
8010
8012
8013
8014
8015
8008 Cylinder SCPCP, SBC
42.0054.00
8000
8001
8002
8003
8005
8006
8007
8008
8009
8010
8012
8013
8014
8015
8009 Emergency release SCPCP, SBC
63.0079.00
8000
8001
8002
8003
8005
8006
8007
8008
8009
8010
8012
8013
8014
8015
8010 Large turn SCPCP, SBC
76.5095.50
8000
8001
8002
8003
8005
8006
8007
8008
8009
8010
8012
8013
8014
8015
8012 Euro profile cylinder SCPCP, SBC
42.0054.00
8000
8001
8002
8003
8005
8006
8007
8008
8009
8010
8012
8013
8014
8015
8013 Indicating turn SCPCP, SBC
70.5090.00
8000
8001
8002
8003
8005
8006
8007
8008
8009
8010
8012
8013
8014
8015
8014 Indicating emergency release SCPCP, SBC
73.5092.50
8015 Indicating large turn SCPCP, SBC
86.00108.00
8054 Accessible turn LH/RH SCPCP, SBC
100.00128.00
8054LIND
8054RIND
Indicating accessible turn (LH)*
Indicating accessible turn (RH)*
SCPCP, SBC
SCP CP, SBC
110.00139.00
110.00139.00
8000
8001
8002
8003
8005
8006
8007
8008
8009
8010
8012
8013
8014
8015
* No hand selection required for ordering.
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C29
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 6000/8000 Series
AccessoriesDescription Finishes Code Price
6000 Series rose cap SCP Z600102 10.00
6000 Series rose cap CP Z600100 12.00
6000 Series rose cap PB Z600101 12.00
6000 Series privacy rose cap SCP Z600202 11.00
6000 Series privacy rose cap CP Z600200 13.50
6000 Series privacy rose cap PB Z600201 13.50
8000 Series rose cap SCP Z800102 14.50
8000 Series rose cap CP Z800100 18.50
8000 Series privacy rose cap SCP Z800202 12.00
8000 Series privacy rose cap CP Z800200 18.50
6000/8000 Series passage latch kit SCP Z6005S 35.50
6000/8000 Series passage latch kit CP Z6005C 35.50
6000/8000 Series passage latch kit PB Z6005P 35.50
6000/8000 Series privacy latch kit SCP ZCA030 36.50
6000/8000 Series privacy latch kit CP ZCA029 36.50
6000/8000 Series privacy latch kit PB ZCA031 36.50
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C30
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 500 Series• 30 year mechanical warranty
Door thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C44).Note: LED plug suits FSH FEL990 electric mortice lock. Adapter required for use with other manufacturers locks.Handing only required for half sets, refer page C24 for ordering procedure.Allow 10 working days for any SCP product not in stock at time of order.Allow 30 working days for special finish orders. Minimum order charges may apply.
Sash lock
500
700
Model Description Finishes Alpha Price code 1 Price code 2
500 Key hole sash lock furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
288.00367.00
288.00367.00
356.00441.00
500EU Euro profile sash lock furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
288.00367.00
288.00367.00
356.00441.00
ExternalModel Description Finishes Alpha Price code 1 Price code 2
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
502 Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
126.00158.00
135.00171.00
166.00208.00
502LED Plate with cylinder hole and LED(refer note)
SCP CP, PB, ORB,
SBC, SBU, ABZ
173.00218.00
184.00231.00
214.00272.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
503 Plain plate furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
126.00158.00
135.00171.00
166.00208.00
503LED Plain plate furniture and LED (refer note)
SCP CP, PB, ORB,
SBC, SBU, ABZ
173.00218.00
184.00231.00
214.00272.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
504 Plate with emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
154.00194.00
164.00207.00
198.00251.00
504IND Plate with indicating emergency release
SCP CP, PB, ORB,
SBC, SBU, ABZ
182.00229.00
190.00243.00
224.00284.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
505 Plate with turn SCP CP, PB, ORB,
SBC, SBU, ABZ
154.00194.00
164.00207.00
198.00251.00
505IND Plate with indicating turn SCP CP, PB, ORB,
SBC, SBU, ABZ
182.00229.00
190.00243.00
224.00284.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
535 Plate with large turn SCP CP, PB, ORB,
SBC, SBU, ABZ
197.00250.00
223.00282.00
259.00323.00
535IND Plate with indicating large turn SCP CP, PB, ORB,
SBC, SBU, ABZ
223.00282.00
250.00316.00
287.00359.00
506/706
508/708
509/709
510/710
515/715
516/716
517/717
518/718
506 Plate only with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
81.00102.00
506/706
508/708
509/709
510/710
515/715
516/716
517/717
518/718
508 Plain plate only SCP CP, PB, ORB,
SBC, SBU, ABZ
81.00102.00
506/706
508/708
509/709
510/710
515/715
516/716
517/717
518/718
509 Plate only with emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
114.00143.00
506/706
508/708
509/709
510/710
515/715
516/716
517/717
518/718
510 Plate only with turn SCP CP, PB, ORB,
SBC, SBU, ABZ
114.00143.00
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C31
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 500 Series• 30 year mechanical warranty
Door thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C44).Note: Handing only required for half sets, refer page C24 for ordering procedure.Allow 10 working days for any SCP product not in stock at time of order. Allow 30 working days for special finish orders. Minimum order charges may apply.
InternalModel Description Finishes Alpha Price code 1 Price code 2
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
511 Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
126.00158.00
135.00171.00
166.00208.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
512 Plain plate furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
126.00158.00
135.00171.00
166.00208.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
513 Plate with emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
154.00194.00
164.00207.00
198.00251.00
513IND Plate with indicating emergencyrelease
SCP CP, PB, ORB,
SBC, SBU, ABZ
182.00229.00
190.00243.00
224.00284.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
514 Plate with turn SCP CP, PB, ORB,
SBC, SBU, ABZ
154.00194.00
164.00207.00
198.00251.00
514IND Plate with indicating turn SCP CP, PB, ORB,
SBC, SBU, ABZ
182.00229.00
190.00243.00
224.00284.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734534 Plate with large turn SCP
CP, PB, ORB, SBC, SBU, ABZ
197.00250.00
223.00282.00
259.00323.00
534IND Plate with indicating large turn SCP CP, PB, ORB,
SBC, SBU, ABZ
223.00282.00
250.00316.00
287.00359.00
554 Plate with accessible turn LH/RH SCP CP, PB, ORB,
SBC, SBU, ABZ
232.00287.00
264.00331.00
295.00373.00
554IND Plate with indicating accessible turn LH/RH
SCP CP, PB, ORB,
SBC, SBU, ABZ
255.00322.00
290.00367.00
324.00408.00
506/706
508/708
509/709
510/710
515/715
516/716
517/717
518/718
515 Plate only with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
81.00102.00
506/706
508/708
509/709
510/710
515/715
516/716
517/717
518/718
516 Plain plate only SCP CP, PB, ORB,
SBC, SBU, ABZ
81.00102.00
506/706
508/708
509/709
510/710
515/715
516/716
517/717
518/718
517 Plate only with emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
114.00143.00
506/706
508/708
509/709
510/710
515/715
516/716
517/717
518/718518 Plate only with turn SCP CP, PB, ORB,
SBC, SBU, ABZ
114.00143.00
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C32
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 500 Anti-Hang Series• 30 year mechanical warranty
Door thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C44).Note: For plain plates to be used with Legge 500 Anti-Hang Series furniture, refer page C30-C31.Handing only required for half sets, refer page C24 for ordering procedure.Allow 10 working days for any SCP product not in stock at time of order.Allow 30 working days for special finish orders. Minimum order charges may apply.
ExternalModel Description Finishes Price
502AH / 702AH
511AH / 711AH
514AH / 714AH
504AH / 704AH
503AH / 703AH
512AH / 712AH
502/AH Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
267.00336.00
502AH / 702AH
511AH / 711AH
514AH / 714AH
504AH / 704AH
503AH / 703AH
512AH / 712AH
503/AH Plain plate furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
267.00336.00
502AH / 702AH
511AH / 711AH
514AH / 714AH
504AH / 704AH
503AH / 703AH
512AH / 712AH
504/AH Plate with emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
309.00394.00
Internal
Model Description Finishes Price
502AH / 702AH
511AH / 711AH
514AH / 714AH
504AH / 704AH
503AH / 703AH
512AH / 712AH
511/AH Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
267.00336.00
502AH / 702AH
511AH / 711AH
514AH / 714AH
504AH / 704AH
503AH / 703AH
512AH / 712AH512/AH Plain plate furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
267.00336.00
502AH / 702AH
511AH / 711AH
514AH / 714AH
504AH / 704AH
503AH / 703AH
512AH / 712AH
514/AH Plate with emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
309.00394.00
Accessories
Model Description Finish Price
LLP80005 Triwing security screw SSS 13.00
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C33
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 500 Anti-Vandal Series• 30 year mechanical warranty
Door thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C44).Note: For plain plates to be used with Legge 500 Anti-Vandal Series furniture, refer page C30-C31.Handing only required for half sets, refer page C24 for ordering procedure. Only available in Alpha or Leonardo levers.Allow 10 working days for any SCP product not in stock at time of order. Allow 30 working days for special finish orders. Minimum order charges may apply.
ExternalModel Description Finishes Price
502AV Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
201.00252.00
503AV Plain plate furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
201.00252.00
504AV Plate with emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
225.00285.00
Internal
Model Description Finishes Price
511AV Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
201.00252.00
512AV Plain plate furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
201.00252.00
514AV Plate with turn SCP CP, PB, ORB,
SBC, SBU, ABZ
225.00285.00
Accessories
Model Description Finish Price
LLP80005 Triwing security screw SSS 13.00
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C34
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 700 Series• 30 year mechanical warranty
Door thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C44).Note: LED plug suits FSH FEL990 electric mortice lock. Adapter required for use with other manufacturers locks.Handing only required for half sets, refer page C24 for ordering procedure. Allow 10 working days for any SCP product not in stock at time of order.Allow 30 working days for special finish orders. Minimum order charges may apply.
Sash Lock500
700
Model Description Finishes Alpha Price Code 1 Price code 2
700 Key hole sash lock furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
288.00367.00
288.00367.00
356.00441.00
700EU Euro profile sash lock furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
288.00367.00
288.00367.00
356.00441.00
ExternalModel Description Finishes Alpha Price code 1 Price code 2
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
702 Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
126.00158.00
135.00171.00
166.00208.00
702LED Plate with cylinder hole and LED SCP CP, PB, ORB,
SBC, SBU, ABZ
173.00218.00
184.00231.00
214.00272.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
703 Plain plate furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
126.00158.00
135.00171.00
166.00208.00
703LED Plain plate furniture and LED SCP CP, PB, ORB,
SBC, SBU, ABZ
173.00218.00
184.00231.00
214.00272.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
704 Plate with emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
154.00194.00
164.00207.00
198.00251.00
704IND Plate with indicating emergency release
SCP CP, PB, ORB,
SBC, SBU, ABZ
182.00229.00
190.00243.00
224.00284.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
705 Plate with turn SCP CP, PB, ORB,
SBC, SBU, ABZ
154.00194.00
164.00207.00
198.00251.00
705IND Plate with indicating turn SCP CP, PB, ORB,
SBC, SBU, ABZ
182.00229.00
190.00243.00
224.00284.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
735 Plate with large turn SCP CP, PB, ORB,
SBC, SBU, ABZ
197.00250.00
223.00282.00
259.00323.00
735IND Plate with indicating large turn SCP CP, PB, ORB,
SBC, SBU, ABZ
223.00282.00
250.00316.00
287.00359.00
506/706
508/708
509/709
510/710
515/715
516/716
517/717
518/718
706 Plate only with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
81.00102.00
506/706
508/708
509/709
510/710
515/715
516/716
517/717
518/718
708 Plain plate only SCP CP, PB, ORB,
SBC, SBU, ABZ
81.00102.00
506/706
508/708
509/709
510/710
515/715
516/716
517/717
518/718
709 Plate only with emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
114.00143.00
506/706
508/708
509/709
510/710
515/715
516/716
517/717
518/718
710 Plate only with turn SCP CP, PB, ORB,
SBC, SBU, ABZ
114.00143.00
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C35
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 700 Series• 30 year mechanical warranty
Door thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C44).Note: Handing only required for half sets, refer page C24 for ordering procedureAllow 10 working days for any SCP product not in stock at time of order.Allow 30 working days for special finish orders. Minimum order charges may apply.
InternalModel Description Finishes Alpha Price code 1 Price code 2
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
711 Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
126.00158.00
135.00171.00
166.00208.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
712 Plain plate furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
126.00158.00
135.00171.00
166.00208.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
713 Plate with emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
154.00194.00
164.00207.00
198.00251.00
713IND Plate with indicating emergencyrelease
SCP CP, PB, ORB,
SBC, SBU, ABZ
182.00229.00
190.00243.00
224.00284.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
714 Plate with turn SCP CP, PB, ORB,
SBC, SBU, ABZ
154.00194.00
164.00207.00
198.00251.00
714IND Plate with indicating turn SCP CP, PB, ORB,
SBC, SBU, ABZ
182.00229.00
190.00243.00
224.00284.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734734 Plate with large turn SCP
CP, PB, ORB, SBC, SBU, ABZ
197.00250.00
223.00282.00
259.00323.00
734IND Plate with indicating large turn SCP CP, PB, ORB,
SBC, SBU, ABZ
223.00282.00
250.00316.00
287.00359.00
754 Plate with accessible turn LH/RH SCP CP, PB, ORB,
SBC, SBU, ABZ
232.00287.00
249.00331.00
295.00373.00
754IND Plate with indicating accessible turn LH/RH
SCP CP, PB, ORB,
SBC, SBU, ABZ
255.00322.00
290.00367.00
324.00408.00
506/706
508/708
509/709
510/710
515/715
516/716
517/717
518/718
715 Plate only with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
81.00102.00
506/706
508/708
509/709
510/710
515/715
516/716
517/717
518/718
716 Plain plate only SCP CP, PB, ORB,
SBC, SBU, ABZ
81.00102.00
506/706
508/708
509/709
510/710
515/715
516/716
517/717
518/718
717 Plate only with emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
114.00143.00
506/706
508/708
509/709
510/710
515/715
516/716
517/717
518/718718 Plate only with turn SCP CP, PB, ORB,
SBC, SBU, ABZ
114.00143.00
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C36
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 700 Anti-Vandal Series• 30 year mechanical warranty
Door thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C44). Note: For plain plates to be used with Legge 700 Anti-Vandal Series furniture, refer page C34-C35.Handing only required for half sets, refer page C24 for ordering procedure. Only available in Alpha or Leonardo levers.Allow 10 working days for any SCP product not in stock at time of order.Allow 30 working days for special finish orders. Minimum order charges may apply.
ExternalModel Description Finishes Price
702/AV Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
201.00252.00
703/AV Plain plate furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
201.00252.00
704/AV Plate with emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
225.00285.00
Internal
Model Description Finishes Price
711/AV Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
201.00252.00
712/AV Plain plate furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
201.00252.00
714/AV Plate with turn SCP CP, PB, ORB,
SBC, SBU, ABZ
225.00285.00
Accessories
Model Description Finish Price
LLP80005 Triwing security screw SSS 13.00
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C37
V1.2
COM
MER
CIA
L D
oor f
urni
ture
InternalCode Description Finish Price
LA711SSS Plate with cylinder hole SSS 146.00
LA712SSS Plain plate furniture SSS 146.00
LA714SSS Plate with turn SSS 179.00
LA754LINDSSS Plate with indicating accessible turn LH SSS 296.00
LA754RINDSSS Plate with indicating accessible turn RH SSS 296.00
Legge 700 Marine Series• 30 year mechanical warranty
Features and benefits: 316L grade stainless steelDoor thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C44).Note: Only available in Alpha lever design.
ExternalCode Description Finish Price
LA702SSS Plate with cylinder hole SSS 146.00
LA703SSS Plain plate furniture SSS 146.00
LA704INDSSS Plate with indicating emergency release SSS 211.00
L706SSS Plate only with cylinder hole SSS 95.00
L708SSS Plain plate only SSS 95.00
502/702
503/703
504/704
505/705
535/735
511/711
512/712
513/713
514/714
534/734
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C38
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 800 Series• 30 year mechanical warranty
Door thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C44).Note: Allow 10 working days for any SCP product not in stock at time of order. Refer pg C22 for ordering procedure.
ExternalModel Description Finish Alpha
802
803
804
805
811
812
813
814
834
802 Plate with cylinder hole LH/RH SCP 287.00802
803
804
805
811
812
813
814
834
803 Plain plate furniture LH/RH SCP 287.00
802
803
804
805
811
812
813
814
834
804 Plate with emergency release LH/RH SCP 303.00
804IND Plate with indicating emergency release LH/RH SCP 330.00
802
803
804
805
811
812
813
814
834
805 Plate with turn LH/RH SCP 303.00
806
808Plain
809
810
815
816Plain
817
818
823
824
825
826
827
819
820
821
822
806 Plate only with cylinder hole LH/RH SCP 197.00806
808Plain
809
810
815
816Plain
817
818
823
824
825
826
827
819
820
821
822
808 Plain plate only SCP 197.00
806
808Plain
809
810
815
816Plain
817
818
823
824
825
826
827
819
820
821
822
809 Plate only with emergency release LH/RH SCP 224.00
806
808Plain
809
810
815
816Plain
817
818
823
824
825
826
827
819
820
821
822
810 Plate only with turn LH/RH SCP 224.00
806
808Plain
809
810
815
816Plain
817
818
823
824
825
826
827
819
820
821
822
819 Plate and pull with cylinder hole LH/RH SCP 254.00
806
808Plain
809
810
815
816Plain
817
818
823
824
825
826
827
819
820
821
822
820 Plain plate and pull LH/RH SCP 254.00
806
808Plain
809
810
815
816Plain
817
818
823
824
825
826
827
819
820
821
822
821 Plate and pull with emergency release LH/RH SCP 284.00
806
808Plain
809
810
815
816Plain
817
818
823
824
825
826
827
819
820
821
822822 Plate and pull with turn LH/RH SCP 284.00
854 Plate with indicating accessible turn LH/RH SCP 401.00
(LH) (RH)
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C39
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 800 Series• 30 year mechanical warranty
Door thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C44). Note: Allow 10 working days for any SCP product not in stock at time of order. Refer pg C22 for ordering procedure.
InternalModel Description Finish Alpha
811 Plate with cylinder hole LH/RH SCP 287.00
812 Plain plate furniture LH/RH SCP 287.00
813 Plate with emergency release LH/RH SCP 303.00
813IND Plate with indicating emergency release LH/RH SCP 330.00
814 Plate with turn LH/RH SCP 303.00
834 Plate with large turn LH/RH SCP 351.00
834IND Plate with large turn indicating LH/RH SCP 370.00
854IND Plate with indicating accessible turn LH/RH SCP 401.00
806
808Plain
809
810
815
816Plain
817
818
823
824
825
826
827
819
820
821
822
815 Plate only with cylinder hole LH/RH SCP 197.00
816 Plain plate only SCP 197.00
806
808Plain
809
810
815
816Plain
817
818
823
824
825
826
827
819
820
821
822
817 Plate only with emergency release LH/RH SCP 224.00
806
808Plain
809
810
815
816Plain
817
818
823
824
825
826
827
819
820
821
822
818 Plate only with turn LH/RH SCP 224.00
806
808Plain
809
810
815
816Plain
817
818
823
824
825
826
827
819
820
821
822
823 Plate and pull with cylinder hole LH/RH SCP 254.00
806
808Plain
809
810
815
816Plain
817
818
823
824
825
826
827
819
820
821
822
824 Plain plate and pull LH/RH SCP 254.00
806
808Plain
809
810
815
816Plain
817
818
823
824
825
826
827
819
820
821
822
825 Plate and pull with emergency release LH/RH SCP 284.00
806
808Plain
809
810
815
816Plain
817
818
823
824
825
826
827
819
820
821
822
826 Plate and pull with turn LH/RH SCP 284.00
806
808Plain
809
810
815
816Plain
817
818
823
824
825
826
827
819
820
821
822
827 Plate and pull with turn nightlatch LH/RH SCP 284.00
802
803
804
805
811
812
813
814
834
(LH) (RH)
802
803
804
805
811
812
813
814
834
802
803
804
805
811
812
813
814
834
802
803
804
805
811
812
813
814
834
802
803
804
805
811
812
813
814
834
802
803
804
805
811
812
813
814
834
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C40
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 5300 Series• 30 year mechanical warranty
Door thickness: 32mm to 50mm. Extended parts to suit 51mm to 75mm available (refer accessories pg C44).Designed to suit Legge 995 Series mortice lock. Modified plate to suit Legge 990 Series mortice lock available.Note: Handing only required for half sets, refer page C25 for ordering procedure and backset compatibilityAllow 10 working days for any SCP product not in stock at time of order.Allow 30 working days for special finish orders. Minimum order charges may apply.
ExternalModel Description Finishes Alpha Price code 1 Price code 2
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5300 Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
160.00199.00
177.00222.00
212.00264.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5304 Plate with emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
186.00234.00
207.00260.00
223.00282.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5305 Plain plate furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
160.00199.00
177.00222.00
212.00264.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5310 Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
106.00133.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5314 Plate only with emergency release
SCP CP, PB, ORB,
SBC, SBU, ABZ
120.00152.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5315 Plain plate only SCP CP, PB, ORB,
SBC, SBU, ABZ
106.00133.00
InternalModel Description Finishes Alpha Price code 1 Price code 2
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5301 Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
160.00199.00
177.00222.00
212.00264.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5303 Plate with turn SCP CP, PB, ORB,
SBC, SBU, ABZ
186.00234.00
207.00260.00
223.00282.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5306 Plain plate furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
160.00199.00
177.00222.00
212.00264.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5311 Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
106.00133.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5313 Plate with turn SCP CP, PB, ORB,
SBC, SBU, ABZ
120.00152.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/54165316 Plain plate only SCP CP, PB, ORB,
SBC, SBU, ABZ
106.00133.00
5353 Plate with accesible turn LH/RH SCP CP, PB, ORB,
SBC, SBU, ABZ
255.00322.00
282.00353.00
337.00425.00
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C41
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 5300 Marine Series• 30 year mechanical warranty
Features and benefits: 316L grade stainless steelDoor thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C44).Note: Only available in Alpha lever design.
ExternalCode Description Finish Price
L5300/29SSS Plate with cylinder hole SSS 183.00
L5304/29SSS Plate with emergency release SSS 216.00
L5305/29SSS Plain plate furniture SSS 183.00
L5310SSS Plate only with cylinder hole SSS 123.00
L5315SSS Plain plate only SSS 123.00
InternalCode Description Finish Price
L5301/29SSS Plate with cylinder hole SSS 183.00
L5303/29SSS Plate with turn SSS 216.00
L5306/29SSS Plain plate furniture SSS 183.00
L5313SSS Plate only with turn SSS 139.00
L5316SSS Plain plate only SSS 123.00
L5353/29LSSS Plate with accessible turn LH SSS 296.00
L5353/29RSSS Plate with accessible turn RH SSS 296.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C42
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge 5400 Series• 30 year mechanical warranty
Door thickness: 32mm to 50mm. Extended parts to suit 51mm to 75mm available (refer accessories pg C44).Note: Designed to suit Legge 995 Series mortice lock. Modified plate to suit Legge 990 Series mortice lock available. Handing only required for half sets, refer page C25 for ordering procedure and backset compatibility.Allow 10 working days for any SCP product not in stock at time of order.Allow 30 working days for special finish orders. Minimum order charges may apply.
ExternalModel Description Finishes Alpha Price code 1 Price code 2
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5400 Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
160.00199.00
177.00222.00
212.00264.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5404 Plate with emergency release SCP CP, PB, ORB,
SBC, SBU, ABZ
186.00234.00
207.00260.00
223.00282.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5405 Plain plate furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
160.00199.00
177.00222.00
212.00264.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5410 Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
106.00133.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5414 Plate only with emergency release
SCP CP, PB, ORB,
SBC, SBU, ABZ
120.00152.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5415 Plain plate only SCP CP, PB, ORB,
SBC, SBU, ABZ
106.00133.00
InternalModel Description Finishes Alpha Price code 1 Price code 2
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5401 Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
160.00199.00
177.00222.00
212.00264.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5403 Plate with turn SCP CP, PB, ORB,
SBC, SBU, ABZ
186.00234.00
207.00260.00
223.00282.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5406 Plain plate furniture SCP CP, PB, ORB,
SBC, SBU, ABZ
160.00199.00
177.00222.00
212.00264.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5411 Plate with cylinder hole SCP CP, PB, ORB,
SBC, SBU, ABZ
106.00133.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
5413 Plate with turn SCP CP, PB, ORB,
SBC, SBU, ABZ
120.00152.00
5416 Plain plate only SCP CP, PB, ORB,
SBC, SBU, ABZ
106.00133.00
5453 Accessible turn LH/RH SCP CP, PB, ORB,
SBC, SBU, ABZ
255.00322.00
282.00353.00
337.00425.00
5300/5400
5301/5401
5303/5403
5304/5404
5305/5405
5306/5406
PLATES
5310/5410
5311/5411
5313/5413
5314/5414
5315/5415
5316/5416
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C43
V1.2
COM
MER
CIA
L D
oor f
urni
ture
Legge Commercial furniture accessories
Description Min. order qty Finishes Code Price
Circlips 10 Z1400/14CC 1.90
Springs 10 Z788SP 2.70
Rotors 10 Z788R 1.30
Rotor stops 10 Z788BST 2.70
Stop screw 10 ZMCP4BA14Z 0.70
Standard screws 3 x 5/32 10 PB ZMRPX5324 4.30
Standard screws 3 x 5/32 10 SSS ZMRPX5323 2.90
Extended screws 4 x 5/32 10 SSS LLP80001 8.20
Triwing security screws 3 x 5/32 10 SSS LLP80005 13.00
Brass star spindle 85mm ZSS 2.30
Tek screws ZTEK4 3.50
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C44
V1.2
COM
MER
CIA
L Pu
ll ha
ndle
s
COM
MER
CIA
L Pu
ll ha
ndle
s
Schlage Stainless steel pull handles• 316 marine grade stainless steel• 10 year SSS finish warranty, 1 year special finish warranty
Fixing: Back to back or single on timber, glass or metal doors. Sold in pairs as standard.
Door Thickness: Timber or aluminium 32 to 70mm (Verona 32 to 55mm), glass 8 to 12mm
Special Finishes: ABZ, ORB and SBC (excludes Verona). Code will follow the SSS format e.g. SBC finish S316-3-600-SBC
Lead Time: Allow 30 working days for special finish orders. Minimum order charges may apply.
Finish
DescriptionOverall length (mm)
Fixingcentre (mm)
Pack CodeSSS
PriceSpecial finish
price
Andor pull handles25mm x 25mm section
325425625825
300400600800
BoxBoxBoxBox
S316-1-325-SSSS316-1-425-SSSS316-1-625-SSSS316-1-825-SSS
157.00 177.00
197.00 217.00
860.00 970.00
1,080.00
Capri pull handles32mm diameter
332482632832
300450600800
BoxBoxBoxBox
S316-6-332-SSSS316-6-482-SSSS316-6-632-SSSS316-6-832-SSS
128.00 148.00 168.00 188.00
448.00 515.00 585.00
Corfu pull handles32mm diameter
45060080010001200
2504006008001000
BoxBoxBoxBoxBox
S316-7-450-SSSS316-7-600-SSSS316-7-800-SSS
S316-7-1000-SSSS316-7-1200-SSS
177.00 197.00 217.00 237.00 257.00
615.00685.00
Dego pull handles25mm square section
3254756258251025
3004506008001000
BoxBoxBoxBoxBox
S316-2-325-SSSS316-2-475-SSSS316-2-625-SSSS316-2-825-SSS
S316-2-1025-SSS
128.00 148.00 168.00 188.00 208.00
448.00 515.00 585.00
Silvi pull handles32mm diameter
3324826328321032
3004506008001000
BoxBoxBoxBoxBox
S316-8-332-SSSS316-8-482-SSSS316-8-632-SSSS316-8-832-SSS
S316-8-1032-SSS
157.00 177.00 197.00 217.00 237.00
545.00 615.00 685.00
Trento pull handles40mm x 20mm rectangular section
620820
1020
600800
1000
BoxBoxBox
S316-4-620-SSSS316-4-820-SSS
S316-4-1020-SSS
197.00 217.00 237.00
685.00
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C45
V1.2
COM
MER
CIA
L Pu
ll ha
ndle
s
COM
MER
CIA
L Pu
ll ha
ndle
s
Single fixing options
DescriptionAluminium/
timberGlass Price
32mmØ x 8mm Bolt Pair DAXF31SSS-A DAXF31SSS-G 24.00
F
H
Schlage Stainless steel pull handles• 316 marine grade stainless steel• 10 year SSS finish warranty, 1 year special finish warranty
Fixing: Back to back or single on timber, glass or metal doors. Sold in pairs as standard.
Door Thickness: Timber or aluminium 32 to 70mm (Verona 32 to 55mm), glass 8 to 12mm.
Special Finishes: ABZ, ORB and SBC (excludes Verona). Code will follow the SSS format e.g. SBC finish S316-3-600-SBC
Lead Time: Allow 30 working days for special finish orders. Minimum order charges may apply.
Finish
DescriptionOverall length (mm)
Fixingcentre (mm)
Pack CodeSSS
PriceSpecial finish
price
Turin pull handles25mm square section
600800
400600
BoxBox
S316-3-600-SSSS316-3-800-SSS
197.00217.00
685.00
Verona pull handles32mm diameter
3805306808801080
300450600800
1000
BoxBoxBoxBoxBox
S316-5-380-SSSS316-5-530-SSSS316-5-680-SSSS316-5-880-SSS
S316-5-1080-SSS
275.00 295.00 315.00 335.00 355.00
960.00 1,030.00 1,100.00
Drilling detailsTimber door fixings Metal door fixings Glass door fixings
Tube size Hole size Tube size Hole size Tube size Hole size
32mm DIAM 10mm 32mm DIAM 10mm 32mm DIAM 14mm
Standard fixing detailsMulti fix - timber, metal or glass doors
Special finish optionsElectropolishing - Recommended for coastal or corrosive environments. Applies to select models only. Price on application.
Schlage Pullhandles-fixinganddrillingdetails
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C46
V1.2
COM
MER
CIA
L D
oor c
ontr
ols
COM
MER
CIA
L D
oor c
ontr
ols
COM
MER
CIA
L D
oor c
ontr
ols
LCN 4031/4031T Series surface mounted closers• 30 year mechanical warranty
Fire rated: Backcheck standard, refer fire door manufacturer for approval.Note: Formed stainless steel cover available, price on application.Special rust inhibitor (SRI) pre-treatment available on indent, add $65.00 list per closer.
Model Description Finish Code Price
4031 REG 4031 REG
Regular closer strength 1-4Regular closer strength 1-4
ALUMDKBZ
LCC25189LCC25177
408.00408.00
4031 HO Hold open closer strength 1-4 ALUM LCC25190 492.00
4031T REG Regular track arm closer strength 1-3 ALUM LCC25191 525.00
4031T HO Hold open track arm closer strength 1-3 ALUM LCC25192 INDENT
AccessoriesModel Description Finish Code Price
4030-18PA Drop plate ALUM LCP25093 73.50
4030-72M Metal cover ALUM LCP25143 36.00
4030-3077 Regular arm assembly ALUM LCP25092 97.00
4030-3049 Hold open arm assembly ALUM LCP25091 198.00
4030-3077T Regular track arm ALUM LCP25090 114.00
4030-3038H LCN 3038 track HO application LCP30234 91.00
4030-3054 LCN 3054 HO clip LCP30237 40.00
4030-SP Screw pack (wood and machine screw) LCP30010 INDENT
4030T-SP Screw pack (wood and machine screw) LCP30011 INDENT
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C47
V1.2
COM
MER
CIA
L D
oor c
ontr
ols
COM
MER
CIA
L D
oor c
ontr
ols
COM
MER
CIA
L D
oor c
ontr
ols
LCN 1461/1461T Series surface mounted closers• 30 year mechanical warranty
Fire rated: Backcheck standard, refer fire door manufacturer for approval.Note: Formed stainless steel cover available, price on application. Special rust inhibitor (SRI) pre-treatment available on indent, add $65.00 list per closer.
Model Description Finish Code Price
1461 REG1461 REG1461 REG
Regular closer strength 1-6Regular closer strength 1-6Regular closer strength 1-6
ALUMBLACK*DKBZ
LCC25113LCC25114LCC25244
525.00525.00525.00
1461 REG SRI Regular closer strength 1-6 SRI ALUM LCC25235 590.00
1461 HO Hold open closer strength 1-6 ALUM LCC25230 625.00
1461 DA Delayed action closer strength 1-6 ALUM LCC25231 565.00
1461 CNS Cush-n-stop closer strength 1-6 ALUM LCC25227 600.00
1460T REG Regular track arm closer strength 2-4 ALUM LCC25232 690.00
1460T HO Hold open track arm closer strength 2-4 ALUM LCC25233 765.00
1461T REG Regular track arm closer strength 1-2 ALUM LCC25229 670.00
*Powder coated black
AccessoriesModel Description Finish Code Price
1460-18FC Adaptor plate for full cover ALUM LCP30094 92.50
1460-18PAFC Drop plate for full cover ALUM LCP30024 101.00
1460-30 Mounting bracket LCP30219 9.70
1460-3049 Hold open arm ALUM LCP16657 236.00
1460-3077 Regular arm ALUM LCP16681 153.00
1460-3077T Regular track arm ALUM LCP25057 145.00
1460-419 Flush panel adaptor ALUM LCP30054 80.00
1460-61 Blade stop aluminium spacer LCP25033 32.50
1460-62PA Parallel arm bracket LCP17221 57.00
1460-72FC Full plastic cover ALUM LCP30076 32.50
1460-SP Screw pack (wood and machine screw) LCP25113 38.50
1460T-SP Screw pack (wood and machine screw) LCP30028 38.50
1460-SB
1461-HO-CNS
1460-4040-TS
1460T-ECS
LCN TB Thru sex bolt 35mm 1/4 BSW thread
LCN 1460 HO cush arm
LCN 1460T/4040T 425 Track roller lock screw
LCN 1460T End cap security fixing set
ALUM
LCP25030
LCP25002
LCP25050
LCP30200
5.60
225.00
1.10
12.50
1460-3038 LCN 3038 Track HO application LCP30234 91.00
1460-3034H LCN 3034H Track roller HO application LCP30235 31.50
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C48
V1.2
COM
MER
CIA
L D
oor c
ontr
ols
COM
MER
CIA
L D
oor c
ontr
ols
Left hand door
OPENING IN
OPENING OUT
Outside Outside
Right hand door
OPENING OUT
OPENING IN
LCN 4040XP/4040XPT Series surface mounted closers• 30 year mechanical warranty
Fire rated: Backcheck standard, refer fire door manufacturer for approval.Note: Formed stainless steel cover available, price on application.Special rust inhibitor (SRI) pre-treatment available on indent, add $65.00 list per closer.
Model Description Finish Code Price
4040XP REG Regular closer strength 1-6 ALUM LCC24081 665.00
4040XP HO Hold open closer strength 1-6 ALUM LCC24145 720.00
4041 DA Delayed action closer 1-6 ALUM LCC25320 720.00
4040XPT REG Regular track arm closer strength 1-4 ALUM LCC25050 790.00
4040XPT HO Hold open track arm closer strength 1-4 ALUM LCC25234 845.00
AccessoriesModel Description Finish Code Price
4040-18FC Adaptor plate for full cover ALUM LCP30095 92.50
4040-18PAFC Drop plate for full cover ALUM LCP25013 101.00
4040-3049 Hold open arm assembly ALUM LCP17328 221.00
4040-3049CNS Hold open cush-n-stop arm ALUM LCP25069 289.00
4040-3077 Regular arm assembly ALUM LCP23521 175.00
4040-3077CNS Cush-n-stop arm ALUM LCP25067 INDENT
4040-3077T Regular track arm ALUM LCP25127 207.00
4040-72FC Full plastic cover ALUM LCP17266 71.00
4040-SP Screw pack (wood and machine screw) LCP30016 INDENT
LCN 4040SentronicSeriesfire/lifesafetyclosers• 30 year mechanical warranty, 2 year electronic warranty
Fire rated: Backcheck standard, refer fire door manufacturer for approval.
Model Description Finish Code Price
4040SE 24V Single point sentronic closer strength 1-4 ALUM LCE24129 1,060.00
4040SE-3038 Track to suit 24V ALUM LCP25073 510.00
4040SE Track arm ALUM LCP25071 176.00
LCN 4300SentronicSeriesfire/lifesafetyclosers• 30 year mechanical warranty, 2 year electronic warranty
Fire rated: Backcheck standard, refer fire door manufacturer for approval.
Model Description Hand Finish Code Price
4314ME 24V Multiple point sentronic closer strength 4
US RHUS LH
ALUMALUM
LCE24079LCE24078
1,660.001,660.00
Please use USA handing chart when ordering 4300 closers
USA handing guide
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C49
V1.2
COM
MER
CIA
L D
oor c
ontr
ols
COM
MER
CIA
L D
oor c
ontr
ols
Briton 1120 Series surface mounted closers• 10 year mechanical warranty
Fire rated: Backcheck standard, refer fire door manufacturer for approvalNote: Formed stainless steel cover available, price on application
Model Description Finish Code Price
1120B Regular closer strength 2-4 SE BNT-1120B-SE 187.00
1120BHO Hold open closer strength 2-4 SE BNT-1120B-HO-SE 228.00
1120BT Track closer strength 1-3 SE BNT-1120B-T-SE 281.00
AccessoriesModel Description Finish Code Price
1120T 1120 Series track arm SE BNT-1120-T 88.50
1120HO 1120 Series hold open arm SE BNT-1120ARM-HO-SE 89.50
1120DP 1120 Series adaptor plate SE BNT-1120-DP 29.00
1120PADP 1120 Series parallel arm drop plate SE BNT-1120-PADP 29.00
1120RA 1120 Series regular arm SE BNT-1120-RA 51.50
1120SC 1120 Series slide cover SE BNT-1120-SC 10.00
1120SP 1120 Series screw pack SE BNT-1120-SP INDENT
1120/1130 1120/1130 Series track hold open clip SE BNT-T-HOCLIP 9.50
1120/1130 1120/1130 Series parallel L bracket SE BNT-1120-L 11.00
1120/1130 1120/1130 Series Z bracket SE BNT-Z-BRACKET 11.00
1120/1130 1120/1130 Series aluminium spacer SE BNT-1120-30-SR 7.90
1120PA 1120 Series parallel arm bracket SE BNT-PA-SE 10.00
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C50
V1.2
COM
MER
CIA
L D
oor c
ontr
ols
COM
MER
CIA
L D
oor c
ontr
ols
Briton 1130 Series surface mounted closers• 10 year mechanical warranty
Fire rated: Backcheck standard, refer fire door manufacturer for approvalNote: Formed stainless steel cover available, price on application
Model Description Finish Code Price
1130BDA Regular closer strength 1-6 delayed action
SE BNT-1130B-DA-SE 285.00
1130BT Track closer strength 1-4 SE BNT-1130B-T-SE 356.00
Briton 2300 Series cam action closers• 10 year mechanical warranty
Fire rated: Backcheck standard, refer fire door manufacturer for approval Note: Stainless steel finish is standard for closer, track and arm assembly
Model Description Finish Code Price
2320BT Cam action track closer strength 2-4 pull side SSS BNT-2320B-T-SS 550.00
2321BT Cam action track closer strength 2-4 push side SSS BNT-2321B-T-SS 550.00
AccessoriesModel Description Finish Code Price
2720/2320HP 2720/2320 Series hold open conversion kit BNT-2320-HP 36.00
2720/2320AB 2720/2320 Series angle mounting bracket SE BNT-2320-AB 36.00
2720/2320CS 2720/2320 Series cushion limit stay BNT-2320-CS 20.00
2720/2320AP 2720/2320 Series track arm set SSS BNT-2320-AP-SS INDENT
2320CPS 2320 Series replacement cover SSS BNT-2320-CPS-SS 72.00
2720/2320TS 2720/2320 Series tracker slider BNT-2320-TS 18.00
AccessoriesModel Description Finish Code Price
1130T 1130 Series track arm SE BNT-1130-T 93.00
1130HO 1130 Series hold open arm SE BNT-1130ARM-HO-SE 101.00
1130DP 1130 Series adaptor plate SE BNT-1130-AP 42.00
1130PADP 1130 Series parallel arm drop plate SE BNT-1130-PADP 46.50
1130RA 1130 Series regular arm SE BNT-1130-RA 43.50
1130SC 1130 Series slide cover SE BNT-1130-SC INDENT
1130SP 1130 Series screw pack SE BNT-1130-SP INDENT
1120/1130 1120/1130 Series track hold open clip SE BNT-T-HOCLIP 9.50
1120/1130 1120/1130 Series parallel L bracket SE BNT-1120-L 11.00
1120/1130 1120/1130 Series Z bracket SE BNT-Z-BRACKET 11.00
1120/1130 1120/1130 Series aluminium spacer SE BNT-1120-30-SR 7.90
1130PA 1130 Series parallel arm bracket SE BNT-PA-SE 10.00
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C51
V1.2
COM
MER
CIA
L D
oor c
ontr
ols
COM
MER
CIA
L D
oor c
ontr
ols
Briton 2300 Series cam action closers• 10 year mechanical warranty
Fire rated: Backcheck standard, refer fire door manufacturer for approval Note: Stainless steel finish is standard for closer, track and arm assembly
Model Description Finish Code Price
2320BT Cam action track closer strength 2-4 pull side SSS BNT-2320B-T-SS 550.00
2321BT Cam action track closer strength 2-4 push side SSS BNT-2321B-T-SS 550.00
AccessoriesModel Description Finish Code Price
2720/2320HP 2720/2320 Series hold open conversion kit BNT-2320-HP 36.00
2720/2320AB 2720/2320 Series angle mounting bracket SE BNT-2320-AB 36.00
2720/2320CS 2720/2320 Series cushion limit stay BNT-2320-CS 20.00
2720/2320AP 2720/2320 Series track arm set SSS BNT-2320-AP-SS INDENT
2320CPS 2320 Series replacement cover SSS BNT-2320-CPS-SS 72.00
2720/2320TS 2720/2320 Series tracker slider BNT-2320-TS 18.00
AccessoriesModel Description Finish Code Price
1130T 1130 Series track arm SE BNT-1130-T 93.00
1130HO 1130 Series hold open arm SE BNT-1130ARM-HO-SE 101.00
1130DP 1130 Series adaptor plate SE BNT-1130-AP 42.00
1130PADP 1130 Series parallel arm drop plate SE BNT-1130-PADP 46.50
1130RA 1130 Series regular arm SE BNT-1130-RA 43.50
1130SC 1130 Series slide cover SE BNT-1130-SC INDENT
1130SP 1130 Series screw pack SE BNT-1130-SP INDENT
1120/1130 1120/1130 Series track hold open clip SE BNT-T-HOCLIP 9.50
1120/1130 1120/1130 Series parallel L bracket SE BNT-1120-L 11.00
1120/1130 1120/1130 Series Z bracket SE BNT-Z-BRACKET 11.00
1120/1130 1120/1130 Series aluminium spacer SE BNT-1120-30-SR 7.90
1130PA 1130 Series parallel arm bracket SE BNT-PA-SE 10.00
Briton Transom closers• 10 year mechanical warranty
Maximum door weight: 80kg, adjustable strength (up to 150kg with heavy duty pivot)Note: Supplied complete with mounting kit and pivot set. Cover plate available, refer accessories
Model Description Code Price
2800 Transom closer non hold open adj 2-4 SL BNT-2800 386.00
2800/90 Transom closer hold open 90° adj 2-4 SL BNT-2800/90 386.00
2800/105 Transom closer hold open 105° adj 2-4 SL BNT-2800/105 386.00
AccessoriesModel Description Finish Code Price
2800A 2800 Series cover plate aluminium application SS BNT-2800A-CP-SS 55.00
2800W 2800 Series cover plate wood application SS BNT-2800W-CP-SS 59.00
2800-BP 2800 Series bottom pivot SE BNT-2800-BP 29.50
2800-SLA 2800 Series side load arm SE BNT-2800-SLA 46.50
2800-HDP 2800 Series heavy duty pivot (up to 150kg) SE BNT-2800-HDP 46.50
2800-SP 2800 Series screw pack BNT-2800-SP INDENT
2800-MB 2800 Series mounting bracket BNT-2800-MB 11.50
Briton 2700 Series cam action closers• 10 year mechanical warranty
Fire rated: Backcheck standard, refer fire door manufacturer for approval Note: Stainless steel finish is standard for closer, track and arm assembly
Model Description Finish Code Price
2720BDT Cam action track closer strength 1-5 pull side delayed action
SSS BNT-2720BD-T-SS 795.00
2721BDT Cam action track closer strength 1-5 push side delayed action
SSS BNT-2721BD-T-SS 795.00
AccessoriesModel Description Finish Code Price
2720/2320HP 2720/2320 Series hold open conversion kit BNT-2320-HP 36.00
2720/2320AB 2720/2320 Series angle mounting bracket SE BNT-2320-AB 36.00
2720/2320CS 2720/2320 Series cushion limit stay BNT-2320-CS 20.00
2720/2320AP 2720/2320 Series track arm set SSS BNT-2320-AP-SS INDENT
2720CPS 2720 Series replacement cover SSS BNT-2720-CPS-SS 77.00
2720/2320TS 2720/2320 Series track slider BNT-2320-TS 13.00
Briton 2400 Series concealed cam action closers• 10 year mechanical warranty
Fire rated: Refer fire door manufacturer for approval
Model Description Finish Code Price
2420T Concealed cam action closer strength 2-4 SE BNT-2420-T-SE 550.00
AccessoriesModel Description Finish Code Price
2420HP 2420 Series hold open conversion kit BNT-2420-HP 33.00
2420CS 2420 Series cushion stop BNT-2420-CS 13.00
2420FPLT 2420 Series flush fixing plate SE BNT-2420-F-PLT 44.00
2420IP 2420 Series intumescent gasket BNT-2420-IP 144.00
2420TS 2420 Series track slider BNT-2420-TS 18.00
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C52
V1.2
COM
MER
CIA
L D
oor c
ontr
ols
COM
MER
CIA
L D
oor c
ontr
ols
Briton Floor springs• 10 year mechanical warranty
Note: Supplied complete with top pivot set, bottom strap and cover plate
5000 SeriesFeatures and benefits: Fixed strength 3 or 4Maximum door weight: 100kg
Model Description Finish Code Price
5003
5003/90
5003/105
5004
5004/90
5004/105
5000-TP
5003-BS
5000-CP
Floor spring EN3 non hold open
Floor spring EN3 hold open 90°
Floor spring EN3 hold open 105°
Floor spring EN4 non hold open
Floor spring EN4 hold open 90°
Floor spring EN4 hold open 105°
5000 Series top pivot set
5000 Series bottom strap
5000 Series cover plate
SSS
SSS
SSS
SSS
SSS
SSS
SSS
BNT-5003
BNT-5003/90
BNT-5003/105
BNT-5004
BNT-5004/90
BNT-5004/105
BNT-5000-TP
BNT-5000-BS
BNT-5000-CP-SSS
449.00
449.00
449.00
449.00
449.00
449.00
40.50
40.50
40.50
w
AccessoriesDescription Finish Code Price
5000/7500 Series spindle 5mm
5000/7500 Series spindle 10mm
5000/7500 Series spindle 15mm
5000/7500 Series spindle 20mm
5000/7500 Series spindle 25mm
5000/7500 Series spindle 30mm
5000/7500 Series spindle 35mm
5000/7500 Series offset arm
SSS
SSS
SSS
SSS
SSS
SSS
SSS
SSS
BNT-FS-SP05
BNT-FS-SP10
BNT-FS-SP15
BNT-FS-SP20
BNT-FS-SP25
BNT-FS-SP30
BNT-FS-SP35
BNT-FS-OA
29.00
34.50
40.50
46.00
52.00
58.50
63.50
174.00
w
7500 SeriesFeatures and benefits: Adjustable strength 3-6Maximum door weight: 300kg
Model Description Finish Code Price
7500
7500/90
7500-TP
7500-BS
7500-CP-SSS
7500 Floor spring size 3-6 non hold open
7500 Floor spring size 3-6 hold open 90°
7500 Series top pivot set
7500 Series bottom strap
7500 Series cover plate
SSS
SSS
SSS
BNT-7500
BNT-7500/90
BNT-7500-TP
BNT-7500-BS
BNT-7500-CP-SSS
1,100.00
1,100.00
140.00
42.50
42.50
w
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C53
V1.2
COM
MER
CIA
L D
oor c
ontr
ols
COM
MER
CIA
L D
oor c
ontr
ols
Briton 2800 Pivot sets• 10 year mechanical warranty
Features and benefits: Adjustable top pivot, needle roller bearing, height adjustable bottom pivot Maximum door weight: 80kgMaximum door width: 1,100mm
Model Description Finish Code Price
2800-PS Light duty pivot set SSS BNT-2800-PS 144.00
Briton 7500 Pivot sets• 10 year mechanical warranty
Features and benefits: Adjustable top pivot, needle roller bearing, heavy duty bottom pivot Maximum door weight: 250kgMaximum door width: 1,400mm
Model Description Finish Code Price
7500-PS Heavy duty pivot set SSS BNT-7500-PS 198.00
Ives Pivot set• 10 year mechanical warranty
Maximum door weight: 136kgMinimum door thickness: 44mm
Description Code Price
7253 Ives top and bottom pivot set GJH24048 INDENT
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C54
V1.2
COM
MER
CIA
L D
oor c
ontr
ols
COM
MER
CIA
L D
oor c
ontr
ols
Ives Coordinators,fillerbarsandmountingbrackets• 10 year mechanical warranty
FB458
FB358
FB31T FB31B FB41T FB41B
FB61T
DP2
COR 32
COR 42
COR 52
FL32
MB2
MB1F
Model Description Finish Code Price
COR32 Door coordinator 810mm (suit opening width 864mm to 1,320mm)
ALUM GJH22065 472.00
COR42 Door coordinator 1,066mm (suit opening width 1,320mm to 1,830mm)
ALUM GJH28071 484.00
FB458
FB358
FB31T FB31B FB41T FB41B
FB61T
DP2
COR 32
COR 42
COR 52
FL32
MB2
MB1F
COR52 Door coordinator 1,320mm (suit opening width 1,575mm to 2,340mm)
ALUM GJH22048 489.00
FL32 Filler bar 500mm to 800mm ALUM GJH22049 74.50
MB2 Mounting bracket ALUM GJH28075 48.50
MB1F
COR7G
COR9G
Mounting bracket
178mm Gravity door coordinator
229mm Gravity door coordinator
ALUM
SCP
SCP
GJH28076
GJH22080
GJH22055
113.00
261.00
261.00
Glynn Johnson Overhead door stops and holders• 10 year mechanical warranty
Model Description Finish Code Price
GJ453S Overhead stop only (681mm to 830mm doors) SCP GJH22003 INDENT
GJ454S Overhead stop only (831mm to 983mm doors) SCP GJH22093 INDENT
GJ453H Overhead hold open (681mm to 830mm doors) SCP GJH22005 INDENT
GJ454H Overhead hold open (831mm to 983mm doors) SCP GJH22094 INDENT
Briton Door selectors• 10 year mechanical warranty
Model Description Finish Code Price
B3000/180 Door selector - suit opening width to 1,800mm SSS B3000/180/SS 122.00
B3000/230 Door selector - suit opening width to 2,400mm SSS B3000/230/SS 122.00
B4000/305 Door selector - for doors fitted with exit hardware SSS B4000/305/SS 122.00
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C55
V1.2
COM
MER
CIA
L D
oor c
ontr
ols
COM
MER
CIA
L D
oor c
ontr
ols
Ives Flush bolts and dust proof strikes• 10 year mechanical warranty
Model Description Finish Code Price
FB458 Manual flush bolt (metal doors)FB458 Extension rod 600mm
SCPSCP
GJH22018GJH22019
57.5013.00
FB358 Manual flush bolt (wood doors) SCP GJH22088 INDENT
FB31T Top automatic flush bolt (metal doors) SCP GJH22034 260.00
FB31B Bottom automatic flush bolt (metal doors) SCP GJH25177 260.00
FB41T Top automatic flush bolt (wood doors) SCP GJH22033 276.00
FB41B Bottom automatic flush bolt (wood doors) SCP GJH25176 276.00
FB51T Top constant latching flush bolt (metal doors)
SCP GJH25188 INDENT
FB61T Top constant latching flush bolt (wood doors)
SCP GJH22031 INDENT
FB458
FB358
FB31T FB31B FB41T FB41B
FB61T
DP2
COR 32
COR 42
COR 52
FL32
MB2
MB1F
DP2 19mm Threshold - floor mounted dust proof strike
SCP GJH22002 76.50
Ives Lock protectors
Model Description Finish Code Price
LG10 63mm x 240mm (13 gauge) Lock protector SSS GJH22089 87.00
LG12 38mm x 240mm (13 gauge) Lock protector SSS GJH22091 INDENT
FB458
FB358
FB31T FB31B FB41T FB41B
FB61T
DP2
COR 32
COR 42
COR 52
FL32
MB2
MB1F
FB458
FB358
FB31T FB31B FB41T FB41B
FB61T
DP2
COR 32
COR 42
COR 52
FL32
MB2
MB1F
FB458
FB358
FB31T FB31B FB41T FB41B
FB61T
DP2
COR 32
COR 42
COR 52
FL32
MB2
MB1F
FB458
FB358
FB31T FB31B FB41T FB41B
FB61T
DP2
COR 32
COR 42
COR 52
FL32
MB2
MB1F
FB458
FB358
FB31T FB31B FB41T FB41B
FB61T
DP2
COR 32
COR 42
COR 52
FL32
MB2
MB1F
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C56
V1.2
COM
MER
CIA
L Ex
it de
vice
s
COM
MER
CIA
L Exitdevices
Von Duprin 22 Series• 10 year mechanical warranty
Fire rated: Refer fire door manufacturer for approvalDoor height: Standard rods accomodate 2,134mm door height, extension rods available
Model Description Length Finishes Code Price
VD22EO Rim exit device only 914mm ALUM VDD11513 685.00
VD22EO Rim exit device only 1,220mm ALUM VDD11524 735.00
VD22EO-F Rim exit device only fire rated 914mm ALUM VDD11536 745.00
VD2227EO Vertical rod exit device only 914mm ALUM VDD11236 1,400.00
VD2227EO Vertical rod exit device only 1,220mm ALUM VDD11504 1,500.00
VD2227EO-F Vertical rod exit device only fire rated 914mm ALUM VDD11535 1,400.00
VD210NL Nightlatch trim (less cylinder)Nightlatch rim cylinder
ALUMSCP
VDD11557SLP26015
163.00122.00
VD230L Lever trim (less cylinder)Lever trim mortice cylinder
ALUMSCP
VDD55011SLP26009
464.00122.00
VD210K Knob and trim cylinder ALUM VDD11558 INDENT
VD230TP Thumbpiece trim (less cylinder)Thumbpiece trim mortice cylinder
ALUMSCP
VDD11350SLP26009
INDENT122.00
VD22ALK Alarm kit to suit 914mm device comprised of: - Alarm panel - LXS2 switch kit - Alarm mortice cylinder (order components separately)
ALUM
SCP
VDE11617VDE11804SLP26009
600.00217.00122.00
Note: For rebated double door set, order:- 1x VD22 Rim exit device- 1x VD2227 Vertical rod exit device- 1x VD1609 Strike
For non-rebated double door set, order:- 2x VD2227 Vertical rod exit device
Accessories
Model Description Code Price
VD22 Black end cap VDP26022 INDENT
VD22 Alarm panel only 914mm VDE11617 600.00
VD22 Alarm panel only 1,220mm VDE10048 INDENT
VD22 LXS2 Switch kit 914mm VDE11804 217.00
VD22 LXS2 Switch kit 1,220mm VDE10019 INDENT
VD22 Alarm mortice cylinder SLP26009 122.00
VD2227 Extension rod 914mm VDP26007 124.00
VD2227 Bottom rod assembly VDP11345 162.00
VD2227 Top rod assembly VDP11343 162.00
VD2227 Rod support VDP26028 INDENT
VD2227 Bottom latch mechanism VDP11341 INDENT
VD2227 Top latch mechanism VDP11340 276.00
VD2227 Latch assembly cover VDP26013 122.00
VD2227 Latch bracket VDP55022 37.50
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C57
V1.2
COM
MER
CIA
L Ex
it de
vice
s
COM
MER
CIA
L Exitdevices
Von Duprin 33A Series• 10 year mechanical warranty
Fire rated: Refer fire door manufacturer for approvalDoor height: Standard rods accomodate 2,134mm door height, extension rods availableMinimum stile width: 44mm
Model Description Length Finish Code Price
VD33A-EO Rim exit device only 914mm SCP VDD11530 1,110.00
VD3327A-EO Vertical rod exit device only 914mm SCP VDD11353 1,680.00
VD388 Nightlatch trim (less cylinder)Nightlatch rim cylinder
SCPSCP
VDD20065SLP26015
INDENT122.00
VD360L Lever trim (less cylinder)Lever trim mortice cylinder
SCPSCP
VDD20062SLP26009
715.00122.00
VD33ALK Alarm kit to suit 914mm device comprised of- Alarm panel- LXS2 switch kit- Alarm mortice cylinder(order components separately)
SCP
SCP
VDE10097VDE11804SLP26009
INDENT217.00122.00
Note: For rebated double door set, order:- 1x VD33 Rim exit device- 1x VD337 Vertical rod exit device- 1x VD1609 Strike
For non-rebated double door set, order:- 2x VD3327 Vertical rod exit device
Accessories
Model Description Code Price
VD3327 Extension rod 914mm VDP11378 104.00
VD3327 Bottom latch mechanism VDP11341 INDENT
VD3327 Top latch mechanism VDP11340 276.00
VD3327 Latch assembly cover VDP26089 INDENT
VD3327 Latch bracket VDP55022 37.50
VD3327 Top rod assembly VDP55040 INDENT
VD3327 Bottom rod assembly VDP55041 INDENT
VD1439 Universal strike VDP55123 35.50
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C58
V1.2
COM
MER
CIA
L Ex
it de
vice
s
Von Duprin 99 Series• 10 year mechanical warranty
Fire rated: Refer fire door manufacturer for approvalDoor height: Standard rods accomodate 2,134mm door height, extension rods available
Model Description Length Finish Code Price
VD99EO Rim exit device only 914mm SCP VDD11568 1,080.00
VD99EO-F Rim exit device only fire rated 914mm SCP VDD11320 INDENT
VD9927EO Vertical rod exit device only 914mm SCP VDD11543 1,620.00
VD9927EO-F Vertical rod exit device only fire rated 914mm SCP VDD11399 INDENT
VD990NL Nightlatch trim (less cylinder)Nightlatch rim cylinder
SCPSCP
VDD11330SLP26015
INDENT122.00
VD990TP Thumbpiece trim (less cylinder)Thumbpiece rim cylinder
SCPSCP
VDD11325SLP26015
INDENT122.00
VD996L Break away lever trim (less cylinder)Lever trim rim cylinder
SCPSCP
VDD26127SLP26015
INDENT122.00
VD99ALK Alarm kit to suit 914mm devicecomprised of:- Alarm panel- LXS2 Switch kit- Alarm mortice cylinder(order components separately)
SCP
SCP
VDE11900VDE11804SLP26009
INDENT217.00122.00
Note: For rebated double door set, order: - 1x VD99 Rim exit device - 1x VD9927 Vertical rod exit device - 1x VD1609 Strike
For non-rebated double door set, order: - 2x VD9927 Vertical rod exit device
Accessories
Model Description Code Price
VD99 Alarm panel only 914mm VDE11900 INDENT
VD99 LXS2 Switch kit 914mm VDE11804 217.00
VD99 Alarm mortice cylinder SLP26009 122.00
VD9927 Extension rod 914mm VDP11378 104.00
VD9927 Bottom latch mechanism VDP11341 INDENT
VD9927 Top latch mechanism VDP11340 276.00
VD9927 Latch assembly cover VDP26044 INDENT
VD9927 Latch bracket VDP55022 37.50
VD9927 Top rod assembly VDP55040 INDENT
VD9927 Bottom rod assembly VDP55041 INDENT
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C59
V1.2
COM
MER
CIA
L Ex
it de
vice
s
Von Duprin 88 Series• 10 year mechanical warranty
Fire rated: Refer fire door manufacturer for approvalDoor height: Standard rods accomodate 2,134mm door height, extension rods available
Model Description Length Finish Code Price
VD88EO Rim exit device only 1,220mm SCP VDD11514 1,630.00
VD8827EO Vertical exit device only 1,220mm SCP VDD16502 2,020.00
Note: For rebated double door set, order:- 1x VD88 Rim exit device- 1x VD8827 Vertical rod exit device- 1x VD1609 Strike
For non-rebated double door set, order:- 2x VD8827 Vertical rod exit device
Accessories
Model Description Code Price
VD8827 Extension rod 610mm VDP11379 INDENT
VD8827 Bottom latch mechanism VDP55032 INDENT
VD8827 Top latch mechanism VDP55008 INDENT
VD8827 Latch assembly cover VDP55013 INDENT
VD8827 Lever axle pack VDP55018 INDENT
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C60
V1.2
COM
MER
CIA
L Ex
it de
vice
s
Von Duprin Chexit• 10 year mechanical warranty, 1 year electronic warranty
Note: Vertical rod exit device available on indent. Power supply and mortice cylinder required to be ordered separately.For Von Duprin PS873 power supply, refer Electronic Solutions section.
Model Description Length Finish Code Price
CX99EO Rim exit device only 914mm SCP VDE11373 INDENT
Chexit mortice cylinder SCP SLP26009 122.00
Von Duprin Universal strikesFire rated: VD 1609 Refer fire door manufacturer for approval
Model Code Price
VD248L-4 VDP26005 71.50
VD265 VDP26017 INDENT
VD299 VDP26003 74.50
VD299F VDP11595 INDENT
VD304L VDP26004 62.50
VD1609 VDP11572 159.00
VD1439 VDP55123 35.50
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C61
V1.2
COM
MER
CIA
L Ex
it de
vice
s
Briton 370 Series• 10 year mechanical warranty
Door height: Standard rods accommodate 2,500mm door height. Long top shoot availableDoor width: Standard cross bar accommodates 1,300mm door width
Model Description Finishes Code Price
376E
377M
378E
379E
1413E Cylinder
990-80 Oval
376E Single panic bolt SE B376E/SE 395.00
376E
377M
378E
379E
1413E Cylinder
990-80 Oval
377E Double panic bolt SE B377E/SE 570.00
376E
377M
378E
379E
1413E Cylinder
990-80 Oval
378E Panic rim latch SE B378E/SE 326.00
379E Panic rim latch (with integrable 990 mortice lock) SE B379E/SE 425.00
1413L Lever trim (includes Euro cylinder) SE B1413LE/SE 263.00
1413K Knob trim (includes Euro cylinder) SE B1413KE/SE 228.00
Parts
Description Finish Code Price
Cross bar 376/377 SE B376CB INDENT
Shoot guide SE B376SG INDENT
Top tripper assembly SE B376TTA INDENT
Top and bottom shoot plug SE B376ESP INDENT
Bottom rod SE B376BS INDENT
Top rods SE B376TS INDENT
2m extension rod - long top shoot SE B376/ELTS/SE 134.00
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C62
V1.2
COM
MER
CIA
L G
ener
al h
ardw
are
COM
MER
CIA
L G
ener
al h
ardw
are
Legge Satin stainless steel pull handles and push plates• 10 year mechanical warranty
Description Plate size (mm) Pull size (mm) Code Price
401
606
601
1351
401 Pull handle visible fixing 300 x 65 150 x 16 DAXPH401SSS-15V 49.00
401 Pull handle visible fixing 300 x 65 200 x 16 DAXPH401SSS-16V 52.50
401
606
601
1351
601 Pull handle visible fixing 300 x 100 200 x 16 DAXPH601SSS-16V 61.50
601 Pull handle concealed fixing 300 x 100 200 x 16 DAXPH601SSS-16C 68.00
606 Push plate concealed fixing (to suit 401 pull)
300 x 100 DAXPH606SSS-C-401 27.00
606 Push plate concealed fixing (to suit 601 pull)
300 x 100 DAXPH606SSS-C 27.00
606 Push plate visible fixing 300 x 100 DAXPH606SSS-V 24.00
1351 Pull handle
1351 Back to back pull handle
150 x 16200 x 16
200 x 16
DAX1351SSS-05DAX1351SSS-06
DAX1351SSS-06-N
33.5040.50
108.00
1351 Pull handle on 38mm rose 150 x 16200 x 16
DAX1351SS-05R38DAX1351SS-06R38
47.00INDENT
401
606
601
1351
1351
1353
1961
1962
19643520
85120
84
30
100
50
W
L
D
401
606
601
1351
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C63
V1.2
COM
MER
CIA
L G
ener
al h
ardw
are
COM
MER
CIA
L G
ener
al h
ardw
are
Legge Door stops• 10 year mechanical warranty
Description Finishes Code Price
12801 Floor mounted door stop 50mm diameter, 35mm height ALUM DAX12801CA 16.00
12802 Floor mounted door stop 35mm diameter, 40mm height SSS DAX12802SSS 14.50
12821 Floor mounted bumper door stop SCP DAX12821SCP 16.00
12901 Floor mounted dome door stop 45mm diameter SCP DAX12901SCP 9.50
Floor mounted round door stop 40mm diameter, 40mm height SNP SDC19026 14.50
Floor mounted square door stop 40mm height SNP SDC19030 14.50
12861 Wall mounted door stop 80mm projection SCP DAX12861SCP 18.00
13001 Wall mounted door stop 80mm projection SSS DAX13001SSS 20.00
13002 Wall mounted door stop 75mm projection SSS DAX13002SSS 16.00
13003 Wall mounted square post door stop 75mm projection SNP SDC19015 16.50
440 Wall mounted round post door stop 80mm projection SNP SDC18540 16.50
470 Wall mounted square post door stop 85mm projection SNP SDC19010 16.50
12841 Hat and coat hook SCP DAX12841SCP 14.50
12921 Hat and coat hook SSS DAX12921SSS 30.50
12
34
56
78
09
12
34
56
78
09
12801
12802
12821
12901
12861
12841
13001
13002
13004
75
Ø 19
75
Ø 19
Ø 32
Ø 25
35
75
Ø 35
12801
12802
12821
12901
12861
12841
13001
13002
13004
75
Ø 19
75
Ø 19
Ø 32
Ø 25
35
75
Ø 35
12801
12802
12821
12901
12861
12841
13001
13002
13004
75
Ø 19
75
Ø 19
Ø 32
Ø 25
35
75
Ø 35
12801
12802
12821
12901
12861
12841
13001
13002
13004
75
Ø 19
75
Ø 19
Ø 32
Ø 25
35
75
Ø 35
12801
12802
12821
12901
12861
12841
13001
13002
13004
75
Ø 19
75
Ø 19
Ø 32
Ø 25
35
75
Ø 35
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C64
V1.2
COM
MER
CIA
L G
ener
al h
ardw
are
COM
MER
CIA
L G
ener
al h
ardw
are
Legge Stainless steel hinges
• 10 year mechanical warranty • All hinges supplied with 304 grade stainless steel screws
Description Size (mm) Finish Code Price
13221 Broad butt, button tipped, loose pin hinge
100 x 75 x 2.5100 x 100 x 2.5
SSSSSS
DAX13221SSS-01LPDAX13221SSS-03LP
12.00INDENT
13222 Broad butt, button tipped, ball bearing, fixed pin hinge
100 x 75 x 2.5100 x 100 x 2.5
SSSSSS
DAX13222SSS-02FPDAX13222SSS-04FP
15.0018.00
13222 Radius broad butt, button tipped, ball bearing, fixed pin hinge
100 x 75 x 2.5 SSS DAX13222SSS-02FPR 10.00
13225 Fast fixed, button tipped, ball bearing, fixed pin hinge with pozi drive screws
100 x 68 x 2.5 SSS DAX13225SSS-FP-T1 12.00
13225 Fast fixed, button tipped, ball bearing, fixed pin hinge with square drive timber screws
13303 pivot hinge set(maximum door weight 80kg)
90 x 45 x 2.5 SSS
SSS
DAX13225SSS-FP-T5
DAX13303SSS
12.00
INDENT
Legge Wall/floormountedlatchbackdoorholders
• 10 year mechanical warranty
Description Size (mm) Finish Code Price
Wall mounted latch back SCP DAXWMLB-4SCP 63.00
Floor mounted latch back 100 SCP DAXFMLB-6SCP 105.00
Floor mounted latch back 175 SCP DAXFMLB-10SCP 147.00
Latch back round door stop 85 SCP SDC19035 21.00
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C65
V1.2
COM
MER
CIA
L G
ener
al h
ardw
are
COM
MER
CIA
L G
ener
al h
ardw
are
Legge Roller catchesDescription Finish Code Price
15201 Kevdon roller catch with screws SSS DAX15201SSS 25.00
Legge heavy duty roller catch SSS DAX15211SSS 30.00
Legge Flush boltsDescription Size (mm) Finish Code Price
1912 Flushbolt40012 Flushbolt60012 Flushbolt80012 Flushbolt
150 x 25400 x 25600 x 25800 x 25
SCPSCPSCPSCP
DAX1912SCPDAX4012SCPDAX6012SCPDAX8012SCP
73.50175.00275.00400.00
1913 Dust socket (suit 12mm bolt) SCP DAX1913SCP 21.00
1912 Socket bolt 150 x 12 SCP LG12SB 60.00
1912 Necked socket bolt 150 x 12 SCP LG12NSB 70.00
Legge Chain boltsDescription Size (mm) Finish Code Price
1851 Chain bolt, reversible shoot with keepers and open out strike
100 SSS DAX1851SSS-01 84.00
Schlage Cabinet locksNote: Heavy duty commercial cabinet lockBolt throw: 25mmDoor thickness: 22mm to 28.5mm
Description Finish Code Price
CL1000 Cabinet lockCL1000 Trim collar
SCPSCP
SCL25636SLP26044
193.0052.50
Legge Door GuardDescription Finish Code Price
Door guard SSS LGHDG7035SSS 78.00
www.allegion.co.nz Customer Service | Auckland: Ph 829 0553 | National: Ph 0800 477 869 C66
V1.2
COM
MER
CIA
L W
ashr
oom
COM
MER
CIA
L W
ashr
oom
Legge Shower seatsDescription Dimensions (mm) Code Price
18501 Fold away shower seat with white high-pressure laminate seat
355 x 360 L18501HPL INDENT
18533 Fold away shower seat with white high-pressure laminate seat
800 x 460 L18533HPL INDENT
18534 Fold away shower seat with fold down legs and white high-pressure laminate seat
800 x 460 L18534HPL INDENT
Legge Indicator bolts1461
1462
Stainless Steel Male Symbol
Stainless Steel Female Symbol
Stainless Steel Disabled Symbol
90° Grab Rail
45° Grab Rail
Straight Grab Rail
DA18501
DA18533
Description Finish Code Price
1461 Indicator bolt with slotted button SCP DAX1461SCP 53.50
Legge SignageDescription Size (mm) Finish Code Price
Male symbol 120 x 120 SSS DAX16241SSS 37.50
Female symbol 120 x 120 SSS DAX16251SSS 37.50
Disabled symbol 120 x 120 SSS DAX16261SSS 37.50
Shower symbol 120 x 120 SSS DAX16281SSS 37.50
Baby change symbol 120 x 120 SSS DAX16291SSS 37.50
Unisex symbol 120 x 120 SSS DAX16271SSS 37.50
Legge Grab railsNote: 1.2 gauge stainless steel, 31.8mm diameter complete with stainless steel screws and concealed fixing, peened or knurled grip finish
1461
1462
Stainless Steel Male Symbol
Stainless Steel Female Symbol
Stainless Steel Disabled Symbol
90° Grab Rail
45° Grab Rail
Straight Grab Rail
DA18501
DA18533
DescriptionDimensions
(mm)Grip/Finish Code Price
90° Grab rail 750 x 750 Peened/SSS LGR750-90S 132.00
1461
1462
Stainless Steel Male Symbol
Stainless Steel Female Symbol
Stainless Steel Disabled Symbol
90° Grab Rail
45° Grab Rail
Straight Grab Rail
DA18501
DA18533
45° Grab rail 305 x 305 Peened/SSS LGR305-45S 82.50
1461
1462
Stainless Steel Male Symbol
Stainless Steel Female Symbol
Stainless Steel Disabled Symbol
90° Grab Rail
45° Grab Rail
Straight Grab Rail
DA18501
DA18533
Straight grab rail 610
305455720810
Peened/SSS
Knurled/SSSKnurled/SSSKnurled/SSSKnurled/SSS
LGR610S
SGR305SGR455SGR720SGR810
66.00
INDENTINDENTINDENTINDENT
1461
1462
Stainless Steel Male Symbol
Stainless Steel Female Symbol
Stainless Steel Disabled Symbol
90° Grab Rail
45° Grab Rail
Straight Grab Rail
DA18501
DA18533
1461
1462
Stainless Steel Male Symbol
Stainless Steel Female Symbol
Stainless Steel Disabled Symbol
90° Grab Rail
45° Grab Rail
Straight Grab Rail
DA18501
DA18533
All prices listed effective from 01/07/2019 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C67
V1.2
COM
MER
CIA
L W
ashr
oom
www.allegion.co.nz
